Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Signal Lines NFM41C Series (1806 Size) c Dimensions c Insertion Loss Characteristics (Main Items) (50 - 50) 1.00.2 0 20 4.50.3 Insertion Loss (dB) 1.50.3 1.60.3 (2) (1) NFM41CC223R2A3 NFM41CC222R2A3 40 NFM41CC102R2A3 NFM41CC471R2A3 NFM41CC221U2A3 60 NFM41CC101U2A3 NFM41CC470U2A3 (3) NFM41CC220U2A3 0.3+0.3 -0.2 80 (2) 0.40.3 100 0.1 : Electrode 1 (in mm) c Equivalent Circuit 10 Frequency (MHz) 100 1000 2000 c Packaging Input (Output) (1) Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 500 Output (Input) (3) No polarity. GND (2) c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range -55 to +125C NFM41CC220U2A3p 22pF 50/-20% 300mA 100Vdc 10000M ohm NFM41CC470U2A3p 47pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125C NFM41CC101U2A3p 100pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125C NFM41CC221U2A3p 220pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125C NFM41CC471R2A3p 470pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125C NFM41CC102R2A3p 1000pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125C NFM41CC222R2A3p 2200pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125C NFM41CC223R2A3p 22000pF 50/-20% 300mA 100Vdc 10000M ohm -55 to +125C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2013.11.11 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Signal Lines Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2013.11.11 http://www.murata.com/