Strap Battery PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection, pioneer of polymeric PTC resettable devices, has developed several material platforms specifically tailored to help protect battery applications. Each of these material platforms offers different performance characteristics, allowing the engineer greater design flexibility. Raychem Circuit Protection's battery protection family includes SRP, LTP, LR4, VTP, VLP, and VLR series, disc, and special application strap devices. 4 Benefits: Features: Applications: * Many material platforms and device form factors give engineers more design flexibility * Compatible with high-volume electronics assembly * Assists in meeting regulatory requirements * Low resistance devices increase battery operating time * Broad range of resettable devices available * Current ratings from 0.7A to 9.0A * Voltage ratings from 12V to 30V * Agency recognition, UL, CSA, TUV * Fast time-to-trip * Low resistance * * * * * * Mobile phone battery packs Cordless phone battery packs Mobile radio packs Computer battery packs Camcorder battery packs PDA battery packs Devices in this section are grouped by: Activation Temperature, Device Series, Hold Current Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 259 Selection Guide for Strap Battery Devices Step 1. Determine the circuit's operating parameters. Fill in the following information about the circuit: Maximum ambient operating temperature Normal operating current Maximum operating voltage (i.e., VTP210G is 16V max.) Maximum interrupt current Step 2. Select the PolySwitch device that will accommodate the circuit's maximum ambient temperature and normal operating current. Look across the top of Table B2 to find the temperature that most closely matches the circuit's maximum operating temperature. Look down the column to find the value equal to or greater than the circuit's normal operating current. Now look to the far left of that row to find the part number for the PolySwitch strap device that will best accommodate the circuit. Devices in this section are grouped by typical activation temperature; therefore, your operating current requirement may be found in more than one grouping. 4 The thermal derating curves located in Figure B3 are the normalized representations of the data in Table B2. Step 3. Compare the selected device's electrical ratings with the circuit's maximum operating voltage and maximum interrupt current. Look down the first column of Table B3 to find the part number you selected in Step 2. Look to the right in that row to find the device's maximum operating voltage (VMAX) and maximum interrupt current (I MAX). Ensure that VMAX and I MAX are greater than or equal to the circuits maximum operating voltage and maximum interrupt current. Step 4. Determine time-to-trip. Time-to-trip is the amount of time it takes for a device to switch to a high-resistance state once a fault current has been applied across the device. Identifying the PolySwitch device's time-to-trip is important in order to provide the desired protection capabilities. If the device you choose trips too fast, undesired or nuisance tripping will occur. If the device trips too slowly, the components being protected may be damaged before the device switches to a high resistance state. 260 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Selection Guide for Strap Battery Devices Figures B19-25 show the typical time-to-trip at 20C for each of the PolySwitch devices. If the PolySwitch device time-to-trip is too fast or too slow for the circuit, go back to Step 2 and choose an alternate device. Step 5. Match Thermal Cut-Off to Cell Chemistry. Thermal cut-off is the temperature at which a PolySwitch device will trip when sourced with a specific current. Figure B1 demonstrates how the resistanceversus-temperature characteristics of various PolySwitch strap device series differ by use of different material platforms. Figure B2 shows the thermal cutoff behavior for each strap battery series device. Actual device performance can vary depending on the application environment, and users should independently test and evaluate each product in their application. Thermally sensitive cell chemistries such as Li-ion and NiMH typically use devices with lower thermal cut-off, which can provide enhanced thermal protection (VLR, VLP, and VTP series). Less sensitive chemistries, like NiCd, typically use devices with higher thermal cut-off temperatures (LR4, SRP series). 4 Step 6. Verify ambient operating conditions. Ensure that your application's minimum and maximum ambient temperatures are within the operating temperature range of -40C to 85C (except for VLR series, which is -40C to 70C). Step 7. Verify the PolySwitch device dimensions. Using dimensions in Table B4, compare the dimensions of the PolySwitch device you selected with the application's space considerations. Figure B1. Resistance vs. Temperature Figure B2. Typical Thermal Cut-Off at 1 A 180 1000000 100000 F E B D A Resistance () 10000 1000 100 10 1 0.1 DE F C BA 0.01 A = VLR B = VLP C = VTP D = LTP E = SRP F = LR4 A = VLR B = VTP C = VLP D = LTP E = SRP F = LR4 160 Thermal Cut-off Temperature (C) C 140 120 F E 100 F C D B A 80 C 60 E D B A 40 20 0 0.001 0 20 40 60 80 100 Temperature (C) Raychem Circuit Protection 120 140 160 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 Resistance at 20 C () PolySwitch Strap Battery Resettable Devices 261 Protection Application Selection Guide for Strap Battery Devices The guide below lists PolySwitch devices which are typically used in these applications. The following pages contain the specifications for the part numbers recommended below. Once a device is selected, the user should evaluate and test each product for its intended application. PolySwitch Resettable Devices--Key Device Selection Criteria Protection Application Mobile phone battery packs Additional Comments NiCd Installation Method Cylindrical (diameter greater than AAA) Cylindrical (AAA cell) Prismatic NiMH Cylindrical (diameter greater than AAA) 4 Cylindrical (AAA cell) Flexprint Prismatic Li-ion Cylindrical (diameter greater than AAA) Flexprint Prismatic 262 PolySwitch Strap Battery Resettable Devices Lowest Resistance LR4-17OU LR4-190 LR4-260 SRP200 SRP420 TAC100-09 TAC170-09 TAC210 VTP170 LR4-190 LR4-260 SRP120 SRP175 VLP270 VTP210G LR4-190 LR4-260 -- -- -- VLP210 VTP170 TAC100-09 TAC170-09 TAC210 miniSMDE190 VLP220 VLP270 VTP210G LR4-190 LR4-260 Lowest Thermal Cut-off LTP070 LTP190 LTP260 LTP340 -- VTP170 VTP210G -- -- -- -- -- -- VLR170 VLR230 VLP270 VTP210G LTP180 LTP190 LTP260 VLP210 VTP170 VTP210G LTP180L (4 cells) -- miniSMDE190 VLR170 VLR230 VLP220 VLP270 VTP210G LR4-380 VLP220 VLP270 VTP210G LR4-190 LR4-260 miniSMDE190 VLP220 VLP270 VTP210G PSR-23096 (single cell) PSR-22631 (single cell) LTP180 VLR170 VLR230 VLP220 VLP270 VTP210G miniSMDE190 VLR170 VLR230 VLP270 VTP210G VTP175 Raychem Circuit Protection Strap Battery Protection Application Selection Guide for Strap Battery Devices continued PolySwitch Resettable Devices--Key Device Selection Criteria Protection Application Additional Comments Installation Method Lowest Resistance Cordless phone battery packs NiCd Cylindrical SRP120 LTP070 SRP175 LTP100 VTP210G VTP210G NiMH Mobile radio packs NiCd NiMH Computer battery packs NiMH Li-ion Camcorder battery packs PDA Raychem Circuit Protection NiCd or Li-Ion Li-Ion Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical Lowest Thermal Cut-off LTP070 LTP070 LTP100 LTP100 VTP210G VTP210G LR4-380 LTP260 LR4-730 LTP300 SRP350 LTP340 LR4-380 LTP260 LR4-730 LTP300 SRP350 LTP340 LR4-380 LTP260 LR4-450 LTP340 LR4-550 -- LR4-600 -- LR4-730 -- SRP420 -- SRP350 -- LR4-380 -- LR4-450 -- LR4-550 -- LR4-600 -- LR4-730 -- SRP350 -- SRP420 -- Prismatic Consult Local Rep Consult Local Rep Cylindrical LR4-450 VTP210G LR4-550 -- LR4-600 -- LR4-730 -- Prismatic VLP220 VLR170 VLP270 VLR230 -- VTP110 -- VTP170 -- VTP210G -- LTP070 -- LTP100 -- LTP180 PolySwitch Strap Battery Resettable Devices 4 263 Table B1. Product Series - Current Rating, Voltage Rating/Typical Resistance for Strap Battery Devices VLR Hold Current (A) 0.70 4 VLP VTP LTP SRP LR4 TAC miniSMDE Typical Activation Temperature 85C 90C 90C 110C 125C 125C 110 125C 110C 15V/0.15 -- -- -- -- -- -- 1.00 -- -- -- -- -- 24V/0.100 -- -- 15V/0.120 -- -- 1.10 -- -- 16V/0.054 -- -- -- -- -- -- 1.20 -- -- -- -- 15V/0.123 -- -- -- -- 1.70 12V/0.025 -- 16V/0.041 -- -- 15V/0.061 -- 15V/0.074 -- 1.75 12V/0.024 -- 16V/0.040 -- 15V/0.070 -- -- -- -- 1.80 -- -- -- 24V/0.054 -- -- -- -- -- 1.90 -- -- -- 24V/0.044 -- 15V/0.056 -- -- 16V/0.032 2.00 -- -- 30V/0.045 -- -- -- -- 2.10 -- -- 16V/0.024 16V/0.031 16V/0.024 -- -- -- -- 15V/0.049 -- 2.20 -- 16V/0.023 -- -- -- -- -- -- -- 2.30 12V/0.015 -- -- -- -- -- -- -- -- 2.40 -- -- 16V/0.020 -- -- -- -- -- -- 2.60 -- 24V/0.034 -- 15V/0.031 -- -- -- -- -- 16V/0.015 -- 2.70 -- -- -- -- -- -- -- 3.00 -- -- -- 24V/0.023 -- -- -- -- -- 3.40 -- -- -- 24V/0.022 -- -- -- -- -- 3.50 -- -- -- -- 30V/0.024 -- -- -- -- 3.80 -- -- -- -- -- 15V/0.020 -- -- -- 4.20 -- -- -- -- 30V/0.018 -- -- -- -- 4.50 -- -- -- -- -- 20V/0.016 -- -- -- 5.50 -- -- -- -- -- 20V/0.013 -- -- -- 6.00 -- -- -- -- -- 20V/0.011 -- -- -- 7.30 -- -- -- -- -- 20V/0.009 -- -- -- 9.00 -- -- -- -- -- 20V/0.008 -- -- -- 264 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Table B2. Thermal Derating for Strap Battery Devices [Hold Current (A) at Ambient Temperature (C)] Maximum Ambient Temperature -40C Amps -20C 0C 20C 25C 40C 50C 60C 70C 80C 85C VLR170 3.5 2.9 2.4 1.84 1.7 1.2 1.0 0.7 0.3 -- -- VLR170U 3.5 2.9 2.4 1.84 1.7 1.2 1.0 0.7 0.3 -- -- VLR175 3.5 2.9 2.4 1.87 1.75 1.3 1.0 0.8 0.3 -- -- VLR175L 3.5 2.9 2.4 1.87 1.75 1.3 1.0 0.8 0.3 -- -- VLR230 5.0 4.2 3.4 2.52 2.3 1.7 1.3 0.9 0.4 -- -- VLR230S 5.0 4.2 3.4 2.52 2.3 1.7 1.3 0.9 0.4 -- -- VLR230SU 5.0 4.2 3.4 2.52 2.3 1.7 1.3 0.9 0.4 -- -- VLR230U 5.0 4.2 3.4 2.52 2.3 1.7 1.3 0.9 0.4 -- -- VLP210 4.3 3.6 2.9 2.31 2.1 1.6 1.3 1.0 0.6 0.3 0.1 VLP220 4.5 3.8 3.0 2.45 2.2 1.7 1.4 1.1 0.7 0.3 0.1 VLP270 5.6 4.7 4.0 3.05 2.7 2.2 1.7 1.4 0.9 0.4 0.1 VTP110 2.0 1.7 1.4 1.02 1.1 0.8 0.6 0.5 0.3 0.2 0.1 VTP170 3.2 2.7 2.2 1.80 1.7 1.3 1.0 0.8 0.5 0.3 0.1 VTP170SS 3.2 2.7 2.2 1.80 1.7 1.3 1.0 0.8 0.5 0.3 0.1 VTP170X 3.2 2.7 2.2 1.80 1.7 1.3 1.0 0.8 0.5 0.3 0.1 Part Number 85C Typical Activation VLR 90C Typical Activation VLP 90C Typical Activation VTP VTP170XS 3.2 2.7 2.2 1.80 1.7 1.3 1.0 0.8 0.5 0.3 0.1 VTP175 3.2 2.7 2.2 1.84 1.75 1.3 1.0 0.8 0.5 0.3 0.1 VTP175L 3.2 2.7 2.2 1.84 1.75 1.3 1.0 0.8 0.5 0.3 0.1 VTP175U 3.2 2.7 2.2 1.84 1.75 1.3 1.0 0.8 0.5 0.3 0.1 VTP200G 3.7 3.2 2.6 2.12 2.0 1.5 1.2 0.9 0.5 0.3 0.1 VTP200U 3.7 3.2 2.6 2.12 2.0 1.5 1.2 0.9 0.5 0.3 0.1 VTP210G 4.1 3.5 2.9 2.26 2.1 1.6 1.3 1.0 0.7 0.4 0.1 VTP210L 4.1 3.5 2.9 2.26 2.1 1.6 1.3 1.0 0.7 0.4 0.1 VTP210S 4.1 3.5 2.9 2.26 2.1 1.6 1.3 1.0 0.7 0.4 0.1 VTP210SL 4.1 3.5 2.9 2.26 2.1 1.6 1.3 1.0 0.7 0.4 0.1 VTP210SL-19.2/5.8 4.1 3.5 2.9 2.26 2.1 1.6 1.3 1.0 0.7 0.4 0.1 VTP210SS 4.1 3.5 2.9 2.26 2.1 1.6 1.3 1.0 0.7 0.4 0.1 VTP210ULD 4.1 3.5 2.9 2.26 2.1 1.6 1.3 1.0 0.7 0.4 0.1 VTP240 4.4 3.7 3.1 2.54 2.4 1.8 1.5 1.2 0.9 0.5 0.1 = Product electrical characteristics determined at 25C 110C Typical Activation LTP LTP070 1.1 1.0 0.8 0.7 0.65 0.5 0.4 0.35 0.2 0.2 0.1 LTP070S 1.1 1.0 0.8 0.7 0.65 0.5 0.4 0.3 0.2 0.2 0.1 LTP100 1.8 1.6 1.4 1.0 0.99 0.8 0.7 0.6 0.4 0.3 0.2 LTP100S 1.8 1.6 1.4 1.0 0.99 0.8 0.7 0.6 0.4 0.3 0.2 LTP100SL 1.8 1.6 1.4 1.0 0.99 0.8 0.7 0.6 0.4 0.3 0.2 LTP100SS 1.8 1.6 1.4 1.0 0.99 0.8 0.7 0.6 0.4 0.3 0.2 LTP180 3.1 2.6 2.2 1.8 1.67 1.3 1.1 0.9 0.6 0.4 0.3 LTP180L 3.1 2.6 2.2 1.8 1.67 1.3 1.1 0.9 0.6 0.4 0.3 Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 265 4 Table B2. Thermal Derating for Strap Battery Devices [Hold Current (A) at Ambient Temperature (C)] continued Maximum Ambient Temperature -40C Amps -20C 0C 20C 25C 40C 50C 60C 70C 80C 85C LTP180S 3.1 2.6 2.2 1.8 1.67 1.3 1.1 0.9 0.6 0.4 0.3 LTP190 3.3 2.8 2.4 1.9 1.79 1.4 1.2 1.1 0.7 0.5 0.4 LTP260 4.3 3.7 3.1 2.6 2.42 1.9 1.6 1.4 1.1 0.8 0.6 LTP300 5.1 4.4 3.7 3.0 2.82 2.3 1.9 1.6 1.2 0.9 0.7 LTP340 5.5 4.7 4.0 3.4 3.17 2.6 2.2 1.9 1.5 1.1 0.9 3.0 2.6 2.2 1.9 1.74 1.4 1.2 1.1 0.7 0.5 0.4 1.6 1.4 1.2 1.0 0.92 0.7 0.6 0.5 0.4 0.2 0.2 LR4-170U 2.5 2.2 2.0 1.7 1.64 1.4 1.3 1.2 1.0 0.9 0.8 LR4-190 2.8 2.5 2.3 1.9 1.86 1.6 1.5 1.4 1.2 1.1 1.0 LR4-190S 2.8 2.5 2.3 1.9 1.86 1.6 1.5 1.4 1.2 1.1 1.0 LR4-260 3.8 3.4 3.1 2.6 2.54 2.2 2.0 1.9 1.7 1.4 1.3 LR4-260S 3.8 3.4 3.1 2.6 2.54 2.2 2.0 1.9 1.7 1.4 1.3 LR4-380 5.4 4.9 4.4 3.8 3.64 3.3 3.0 2.8 2.5 2.3 2.1 LR4-450 6.5 5.8 5.3 4.5 4.38 3.9 3.6 3.3 2.9 2.6 2.4 LR4-550 7.6 6.9 6.2 5.5 5.32 4.7 4.3 4.0 3.6 3.2 3.0 LR4-600 8.7 7.8 7.1 6.0 5.86 5.2 4.7 4.4 3.9 3.4 3.2 LR4-730 10.5 9.5 8.6 7.3 7.13 6.3 5.7 5.4 4.7 4.2 4.0 LR4-900 12.7 11.4 10 9.0 8.5 7.5 6.8 6.2 5.5 4.9 4.5 SRP120 1.9 1.7 1.5 1.2 1.17 1.0 0.9 0.8 0.6 0.5 0.4 SRP120L 1.9 1.7 1.5 1.2 1.17 1.0 0.9 0.8 0.6 0.5 0.4 SRP120S 1.9 1.7 1.5 1.2 1.17 1.0 0.9 0.8 0.6 0.5 0.4 SRP175 2.5 2.2 2.0 1.75 1.68 1.4 1.3 1.2 1.0 0.9 0.8 SRP175L 2.5 2.2 2.0 1.75 1.68 1.4 1.3 1.2 1.0 0.9 0.8 SRP175S 2.5 2.2 2.0 1.75 1.68 1.4 1.3 1.2 1.0 0.9 0.8 SRP175SS 2.5 2.2 2.0 1.75 1.68 1.4 1.3 1.2 1.0 0.9 0.8 SRP200 3.1 2.8 2.5 2.0 1.97 1.7 1.5 1.4 1.2 1.0 0.9 SRP350 5.3 4.8 4.3 3.5 3.44 3.0 2.7 2.5 2.1 1.8 1.7 SRP420 6.3 5.7 5.1 4.2 4.11 3.6 3.3 3.0 2.6 2.2 2.1 Part Number 110C Typical Activation LTP, continued miniSMDE miniSMDE190 TAC TAC100-09 125C Typical Activation LR4 4 SRP TAC TAC170-09 2.4 2.2 2.0 1.7 1.67 1.5 1.4 1.3 1.1 1.0 1.0 TAC210 2.8 2.6 2.3 2.1 2.03 1.7 1.6 1.5 1.3 1.2 1.1 266 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Figure B3. Thermal Derating 200 Percent of Rated Hold and Trip Current 180 E D C A = LR4 B = SRP C = LTP D = VTP, VLP E = VLR 160 140 B A 120 100 80 60 A B 40 20 0 - 50 C E - 40 - 30 -20 -10 0 10 20 30 40 50 60 70 80 D 4 90 Temperature (C) Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 267 Table B3. Product Electrical Characteristics for Strap Battery Devices 4 Part Number IH (A) IT (A) VMAX (VDC) IMAX (A) PD TYP (W) Max. Time-to-Trip RMIN (A) (s) () RTYP () RMAX () RTripped TYP R1 MAX () () 85C Typical Activation VLR VLR170 VLR170U VLR175 VLR175L VLR230 VLR230S VLR230SU VLR230U 1.7 1.7 1.75 1.75 2.3 2.3 2.3 2.3 4.1 4.1 4.2 4.2 5.0 5.0 5.0 5.0 12 12 12 12 12 12 12 12 100 100 100 100 100 100 100 100 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 8.5 8.5 8.75 8.75 10.0 8.75 8.75 8.75 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 0.018 0.018 0.017 0.017 0.012 0.012 0.012 0.012 0.025 0.025 0.024 0.024 0.015 0.015 0.015 0.015 0.032 0.032 0.031 0.031 0.018 0.018 0.018 0.018 0.050 0.050 0.048 0.048 0.030 0.030 0.030 0.030 0.064 0.064 0.062 0.062 0.036 0.036 0.036 0.036 B5 B8 B5 B5 B5 B6 B6 B8 90C Typical Activation VLP VLP210 VLP220 VLP270 2.1 2.1 2.7 5.0 5.3 6.5 16 16 16 60 60 60 0.8 0.8 1.2 10.5 11.0 13.5 5.0 5.0 5.0 0.018 0.017 0.012 0.024 0.023 0.015 0.030 0.029 0.018 0.048 0.046 0.030 0.060 0.058 0.036 B4 B5 B5 90C Typical Activation VTP VTP110 VTP170 VTP170SS VTP170X VTP170XS VTP175 VTP175L VTP175U VTP200G VTP200U VTP210G VTP210L VTP210S VTP210SL VTP210SL-19.2/5.8 VTP210SS VTP210ULD VTP240 1.1 1.7 1.7 1.7 1.7 1.75 1.75 1.75 2.0 2.0 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.4 2.7 3.4 3.4 3.4 3.4 3.6 3.6 3.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 5.9 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 0.7 1.0 1.0 0.7 0.7 0.8 0.8 0.8 0.9 0.9 1.2 1.2 1.2 1.2 1.2 1.2 1.5 1.0 7.0 8.5 8.5 8.5 10.0 8.75 8.75 8.75 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 5.0 3.0 3.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 0.038 0.030 0.030 0.030 0.030 0.029 0.029 0.029 0.022 0.022 0.018 0.018 0.018 0.018 0.018 0.018 0.018 0.014 0.054 0.041 0.041 0.041 0.041 0.040 0.040 0.040 0.031 0.031 0.024 0.024 0.024 0.024 0.024 0.024 0.024 0.020 0.070 0.052 0.052 0.052 0.052 0.051 0.051 0.051 0.039 0.039 0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.026 0.108 0.082 0.082 0.082 0.082 0.080 0.080 0.080 0.062 0.062 0.048 0.048 0.048 0.048 0.048 0.048 0.048 0.040 0.140 0.105 0.105 0.105 0.105 0.102 0.102 0.102 0.078 0.078 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.052 B8 B4 B11 B5 B6 B5 B5 B8 B5 B8 B5 B5 B6 B6 B6 B7 B8 B5 110C Typical Activation LTP LTP070 LTP070S LTP100 LTP100S LTP100SL LTP100SS LTP180 LTP180L LTP180S LTP190 LTP260 LTP300 LTP340 0.7 0.7 1.0 1.0 1.0 1.0 1.8 1.8 1.8 1.9 2.6 3.0 3.4 1.45 1.45 2.50 2.50 2.50 2.50 3.80 3.80 3.80 4.20 5.20 6.30 6.80 15 15 24 24 24 24 24 24 24 24 24 24 24 100 100 100 100 100 100 100 100 100 100 100 100 100 0.7 0.7 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.9 1.3 1.7 1.6 3.5 3.5 5.0 5.0 5.0 5.0 9.0 9.0 9.0 10.0 13.0 15.0 17.0 5.0 5.0 7.0 7.0 7.0 7.0 2.9 2.9 2.9 3.0 5.0 4.0 5.0 0.100 0.100 0.070 0.070 0.070 0.070 0.040 0.040 0.040 0.030 0.025 0.015 0.016 0.150 0.150 0.100 0.100 0.100 0.100 0.054 0.054 0.054 0.044 0.034 0.023 0.022 0.200 0.200 0.130 0.130 0.130 0.130 0.068 0.068 0.068 0.057 0.042 0.031 0.027 0.300 0.300 0.200 0.200 0.200 0.200 0.108 0.108 0.108 0.088 0.068 0.046 0.044 0.340 0.340 0.260 0.260 0.260 0.260 0.120 0.120 0.120 0.100 0.076 0.055 0.050 B9 B10 B9 B10 B10 B11 B9 B9 B10 B9 B9 B9 B9 268 PolySwitch Strap Battery Resettable Devices Figures for Dimensions Raychem Circuit Protection Strap Battery Table B3. Product Electrical Characteristics for Strap Battery Devices continued Part Number IH (A) IT (A) VMAX IMAX (VDC) (A) PD TYP (W) (A) Max. Time-to-Trip RMIN (s) () RTYP () RMAX () RTripped TYP R1 MAX () () 1.9 3.8 16 100 1.5 10.0 2.0 0.024 0.032 0.040 0.060 0.080* B18 1.0 2.4 15 50 1.2 5.0 5.0 0.085 0.120 0.155 0.240 0.300 B12 Figures for Dimensions miniSMDE miniSMDE190 TAC TAC100-09 125C Typical Activation LR4 LR4-170U 1.7 3.4 15 100 0.8 8.5 5.0 0.044 0.061 0.078 0.089 0.114 B15 LR4-190 1.9 3.9 15 100 0.8 9.5 5.0 0.039 0.056 0.072 0.079 0.102 B13 LR4-190S 1.9 3.9 15 100 0.8 9.5 5.0 0.039 0.056 0.072 0.079 0.102 B14 LR4-260 2.6 5.8 15 100 1.0 13.0 5.0 0.020 0.031 0.042 0.046 0.063 B13 LR4-260S 2.6 5.8 15 100 1.0 13.0 5.0 0.020 0.031 0.042 0.046 0.063 B14 LR4-380 3.8 8.3 15 100 1.2 19.0 5.0 0.013 0.020 0.026 0.028 0.037 B13 LR4-450 4.5 8.9 20 100 1.4 22.5 5.0 0.011 0.016 0.020 0.022 0.028 B13 LR4-550 5.5 10.5 20 100 2.0 27.5 5.0 0.009 0.013 0.016 0.018 0.022 B13 LR4-600 6.0 11.7 20 100 1.7 30.0 5.0 0.007 0.011 0.014 0.015 0.019 B13 LR4-730 7.3 14.1 20 100 1.9 30.0 5.0 0.006 0.009 0.012 0.011 0.015 B13 LR4-900 9.0 16.7 20 100 3.0 45.0 5.0 0.006 0.008 0.010 0.011 0.014 B13 SRP120 1.2 2.7 15 100 0.8 6.0 5.0 0.085 0.123 0.160 0.170 0.220 B9 SRP120L 1.2 2.7 15 100 0.8 6.0 5.0 0.085 0.123 0.160 0.170 0.220 B9 SRP120S 1.2 2.7 15 100 0.8 6.0 5.0 0.085 0.123 0.160 0.170 0.220 B16 SRP175 1.75 3.8 15 100 0.9 8.75 5.0 0.050 0.070 0.090 0.093 0.120 B9 SRP175L 1.75 3.8 15 100 0.9 8.75 5.0 0.050 0.070 0.090 0.093 0.120 B9 SRP175S 1.75 3.8 15 100 0.9 8.75 5.0 0.050 0.070 0.090 0.093 0.120 B16 SRP175SS 1.75 3.8 15 100 0.9 8.75 5.0 0.050 0.070 0.090 0.093 0.120 B17 SRP200 2.0 4.4 30 100 1.6 10.0 4.0 0.030 0.045 0.060 0.075 0.100 B9 SRP350 3.5 6.3 30 100 1.9 20.0 3.0 0.017 0.024 0.031 0.040 0.050 B9 SRP420 4.2 7.6 30 100 2.2 20.0 6.0 0.012 0.018 0.024 0.030 0.040 B9 SRP 4 TAC TAC170-09 1.7 3.7 15 50 1.2 8.5 5.0 0.05 0.074 0.098 0.106 0.140 B12 TAC210 2.1 4.7 15 50 1.3 10.5 5.0 0.035 0.049 0.062 0.089 0.113 B12 Notes: IH = Hold current: maximum current device will pass without interruption in 20C still air unless otherwise specified. IT = Trip current: minimum current that will switch the device from low resistance to high resistance in 20C still air unless otherwise specified. VMAX = Maximum voltage device can withstand without damage at rated current. IMAX = Maximum fault current device can withstand without damage at rated voltage. PD = Power dissipated from device when in the tripped state in 20C still air unless otherwise specified. RMIN = Minimum resistance of device as supplied at 20C unless otherwise specified. RTYP = Typical resistance of device as supplied at 20C unless otherwise specified. RTripped Typ = Typical resistance, measured at 20C unless otherwise specified, of device one hour after being tripped the first time. RMAX = Maximum resistance of device as supplied at 20C unless otherwise specified. = Product electrical characteristics determined at 25C. * = R1max value for this device is the maximum resistance of the device at 20C one hour after reflow. Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 269 Figures B4-B18. Physical Description for Dimensions Figure B4 Figure B5 Figure B6 B A A B C B F C F D D A F C E E Figure B7 Figure B8 B E D Figure B9 A A B A E D E D C F C F C Figure B10 F Figure B11 B E D Figure B12 A 4 A B A C F D E B F C C B F E D E Figure B13 D Figure B14 Figure B15 A A B A F C C F F C E D E D E D Figure B16 B B Figure B17 Figure B18 D A A C C F F C E B D E B A B D Note: All slit parts are 0.5mm x 4.0mm nom. (0.02 in x 0.16 in) 270 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Table B4. Dimensions for Strap Battery Devices in Millimeters (Inches) Dimension A Part Number B C D E F Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figures VLR170 20.8 (0.82) 23.2 (0.91) -- -- 0.8 (0.03) 3.5 (0.14) 3.9 (0.15) 4.5 (0.18) 6.5 (0.26) 4.5 (0.18) 6.5 (0.26) 2.4 (0.09) 2.6 (0.10) B5 -- VLR170U 20.8 (0.82) 23.2 (0.91) -- -- 0.7 (0.03) 3.5 (0.14) 3.7 (0.15) 5.3 (0.21) 6.7 (0.26) 5.3 (0.21) 6.7 (0.26) 2.4 (0.09) 2.6 (0.10) B8 -- VLR175 23.0 (0.91) 24.5 (0.96) -- -- 0.8 (0.03) 2.9 (0.11) 3.3 (0.13) 4.7 (0.19) 7.2 (0.28) 3.8 (0.15) 5.4 (0.21) 2.4 (0.09) 2.6 (0.10) B5 -- VLR175L 29.3 (1.15) 31.7 (1.25) -- -- 0.8 (0.03) 2.9 (0.11) 3.3 (0.13) 5.2 (0.21) 6.8 (0.27) 10.0 (0.39) 12.5 (0.49) 2.4 (0.09) 2.6 (0.10) B5 -- VLR230 20.9 (0.82) 23.1 (0.91) -- -- 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 4.1 (0.16) 5.8 (0.23) 4.1 (0.16) 5.8 (0.23) 3.9 (0.15) 4.1 (0.16) B5 -- VLR230S 20.9 (0.82) 23.1 (0.91) -- -- 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 4.1 (0.16) 5.8 (0.23) 4.1 (0.16) 5.8 (0.23) 3.9 (0.15) 4.1 (0.16) B6 -- VLR230SU 20.9 (0.82) 23.1 (0.91) -- -- 0.7 (0.03) 4.9 (0.19) 5.1 (0.20) 4.1 (0.16) 6.0 (0.24) 4.1 (0.16) 6.0 (0.24) 3.9 (0.15) 4.1 (0.16) B6 -- VLR230U 20.9 (0.82) 23.1 (0.91) -- -- 0.7 (0.03) 4.9 (0.19) 5.1 (0.20) 4.1 (0.16) 6.0 (0.24) 4.1 (0.16) 6.0 (0.24) 3.9 (0.15) 4.1 (0.16) B8 -- 85C Typical Activation VLR 90C Typical Activation VLP VLP210 15.4 17.5 (0.606) (0.689) 0.6 (0.02) 0.8 (0.03) 6.7 (0.265) 7.3 (.287) 4.0 (0.157) 6.2 (0.244) 4.0 6.2 (0.157) (0.244) 3.9 (0.15) 4.1 (0.16) B4 -- VLP220 21.1 (0.83) 23.3 (.92) 0.6 (0.02) 0.8 (0.03) 3.5 (0.13) 3.9 (0.15) 5.1 (0.20) 6.8 (0.27) 5.1 (0.20) 6.8 (0.27) 2.9 (0.11) 3.1 (0.12) B5 -- VLP270 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 4.1 (0.16) 5.8 (0.23) 4.1 (0.16) 5.8 (0.23) 3.9 (0.15) 4.1 (0.16) B5 -- VTP110 23.6 (0.93) 25.6 (1.01) -- -- 0.7 (0.03) 2.7 (0.11) 2.9 (0.11) 7.0 (0.28) 8.0 (0.32) 7.0 (0.28) 8.0 (0.32) 2.3 (0.09) 2.5 (0.10) B8 -- VTP170 15.4 17.5 (0.606) (0.689) 0.5 (0.02) 0.8 (0.03) 7.0 (0.275) 7.4 (0.292) 4.0 (0.157) 6.2 (0.244) 4.0 6.2 (0.157) (0.244) 3.9 (0.15) 4.1 (0.16) B4 -- VTP170SS 15.4 17.5 (0.606) (0.689) 0.5 (0.02) 0.8 (0.03) 7.0 (0.275) 7.4 (0.292) 4.0 (0.157) 6.2 (0.244) 4.0 6.2 (0.157) (0.244) 3.9 4.1 B11 (0.154) (0.161) -- VTP170X 20.9 (0.82) 22.9 (0.90) 0.5 (0.02) 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 6.0 (0.23) 8.6 (0.34) 6.0 (0.23) 8.6 (0.34) 3.9 (0.15) 4.1 (0.16) B5 -- VTP170XS 20.9 (0.82) 22.9 (0.90) 0.5 (0.02) 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 6.0 (0.23) 8.6 (0.34) 6.0 (0.23) 8.6 (0.34) 3.9 (0.15) 4.1 (0.16) B6 -- VTP175 21.2 (0.83) 23.2 (0.91) -- -- 0.8 (0.03) 3.5 (0.14) 3.9 (0.15) 4.6 (0.18) 6.6 (0.26) 4.6 (0.18) 6.6 (0.26) 2.9 (0.11) 3.1 (0.12) B5 -- VTP175L 25.8 (1.02) 28.2 (1.11) -- -- 0.8 (0.03) 3.5 (0.13) 3.9 (0.15) 5.7 (0.22) 7.3 (0.29) 8.7 (0.34) 10.3 (0.41) 2.4 (0.09) 2.6 (0.10) B5 -- VTP175U 21.2 (0.83) 23.2 (0.91) -- -- 0.7 (0.03) 3.5 (0.13) 3.7 (0.15) 5.6 (0.22) 6.8 (0.27) 5.6 (0.22) 6.8 (0.27) 2.9 (0.11) 3.1 (0.12) B8 -- VTP200G 20.9 (0.82) 23.1 (0.91) -- -- 0.8 (0.03) 4.1 (0.16) 4.5 (0.18) 3.0 (0.11) 4.8 (0.19) 3.0 (0.11) 4.8 (0.19) 2.9 (0.11) 3.1 (0.12) B5 -- VTP200U 20.9 (0.82) 23.1 (0.91) -- -- 0.7 (0.03) 4.1 (0.16) 4.3 (0.17) 4.0 (0.16) 5.4 (0.21) 4.0 (0.16) 5.4 (0.21) 2.9 (0.11) 3.1 (0.12) B8 -- VTP210G 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 4.1 (0.16) 5.8 (0.23) 4.1 (0.16) 5.8 (0.23) 3.9 (0.15) 4.1 (0.16) B5 -- VTP210L 24.0 (0.94) 26.0 (1.02) 0.6 (0.02) 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 5.0 (0.20) 7.1 (0.28) 5.0 (0.20) 7.1 (0.28) 3.9 (0.15) 4.1 (0.16) B5 -- 90C Typical Activation VTP Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 271 4 Table B4. Dimensions for Strap Battery Devices in Millimeters (Inches) continued Dimension A Part Number B C D Min. Max. Min. Max. Min. Max. Min. VTP210S 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 4.1 (0.16) VTP210SL 29.0 (1.14) 32.0 (1.26) 0.6 (0.02) 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) VTP210SL-19.2/5.8 34.0 (1.33) 37.0 (1.46) -- -- 0.8 (0.03) 4.9 (0.19) VTP210SS 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 0.8 (0.03) VTP210ULD 22.8 (0.89) 25.2 (1.00) -- -- VTP240 23.8 (0.93) 26.2 (1.03) E Max. F Min. Max. Min. Max. Figures 5.8 (0.28) 4.1 (0.16) 5.8 (0.23) 3.9 (0.15) 4.1 (0.16) B6 -- 3.5 (0.13) 5.8 (0.23) 12.5 (0.49) 14.5 (0.57) 3.9 (0.15) 4.1 (0.16) B6 -- 5.3 (0.21) 16.8 (0.66) 19.2 (0.76) 4.1 (0.16) 5.8 (0.23) 3.9 (0.15) 4.1 (0.16) B6 -- 4.9 (0.19) 5.3 (0.21) 4.1 (0.16) 5.8 (0.23) 4.1 (0.16) 5.8 (0.23) 3.9 (0.15) 4.1 (0.16) B7 -- 0.8 (0.03) 4.9 (0.19) 5.1 (0.20) 7.8 (0.30) 9.2 (0.37) 2.9 (0.11) 4.1 (0.17) 2.9 (0.11) 3.1 (0.13) B8 -- -- -- 0.8 (0.03) 4.9 (0.19) 5.3 (0.21) 3.5 (0.13) 5.7 (0.23) 3.5 (0.13) 5.7 (0.23) 3.9 (0.15) 4.1 (0.16) B5 -- 90C Typical Activation VTP, continued 110C Typical Activation LTP 4 LTP070 19.9 22.1 (0.783) (0.870) 0.7 (0.027) 1.2 (0.048) 4.9 (0.192) 5.2 (0.205) 5.5 7.5 (0.216) (0.296) 5.5 7.5 (0.216) (0.296) 3.9 4.1 (0.153) (0.162) B9 -- LTP070S 19.9 22.1 (0.783) (0.870) 0.7 (0.027) 1.2 (0.048) 4.9 (0.192) 5.2 (0.205) 5.5 7.5 (0.216) (0.296) 5.5 7.5 (0.216) (0.296) 3.9 4.1 B10 (0.153) (0.162) -- LTP100 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B9 -- LTP100S 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B10 -- LTP100SL 29.0 (1.14) 32.0 (1.26) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 3.5 (0.13) 5.5 (0.22) 12.5 (0.49) 14.5 (0.57) 3.9 (0.15) 4.1 (0.16) B10 -- LTP100SS 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B11 -- LTP180 24.0 (0.94) 26.0 (1.02) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B9 -- LTP180L 35.5 (1.40) 37.5 (1.48) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 9.7 (0.38) 11.0 (0.44) 9.7 (0.38) 11.0 (0.44) 3.9 (0.15) 4.1 (0.16) B9 -- LTP180S 24.0 (0.94) 26.0 (1.02) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B10 -- LTP190 21.3 (0.84) 23.4 (0.92) 0.5 (0.02) 1.1 (0.04) 10.2 (0.40) 11.0 (0.43) 5.0 (0.20) 7.6 (0.30) 5.0 (0.20) 7.6 (0.30) 4.8 (0.19) 5.4 (0.21) B9 -- LTP260 24.0 (0.94) 26.0 (1.02) 0.6 (0.02) 1.0 (0.04) 10.8 (0.43) 11.9 (0.47) 5.0 (0.20) 7.0 (0.28) 5.0 (0.20) 7.0 (0.28) 5.9 (0.23) 6.1 (0.24) B9 -- LTP300 28.4 (1.12) 31.8 (1.25) 0.5 (0.02) 1.1 (0.04) 13.0 (0.51) 13.5 (0.53) 6.3 (0.25) 8.9 (0.35) 6.3 (0.25) 8.9 (0.35) 6.0 (0.24) 6.6 (0.26) B9 -- LTP340 24.0 (0.94) 26.0 (1.02) 0.6 (0.02) 1.0 (0.04) 14.8 (0.58) 15.9 (0.63) 4.0 (0.16) 5.0 (0.20) 4.0 (0.16) 5.0 (0.20) 5.9 (0.23) 6.1 (0.24) B9 -- 11.15 11.51 (0.439) (0.453) 0.33 (0.013) 0.53 (0.021) 4.83 (0.19) 5.33 (0.21) 0.51 (0.02) 1.02 (0.04) -- -- -- -- -- -- -- -- B18 -- 16.5 (0.65) -- -- 0.9 (0.036) 9.5 (0.37) 10.5 (0.45) 9.4 (0.37) 10.0 (0.040) 5.0 (0.19) 5.2 (0.21) 0.8 (0.03) 1.2 (0.05) B12 -- miniSMDE miniSMDE190 TAC TAC100-09 272 17.5 (0.69) PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Table B4. Dimensions for Strap Battery Devices in Millimeters (Inches) continued Dimension A Part Number Min. B C D E F Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Figures 125C Typical Activation LR4 LR4-170U 19.0 (0.75) 21.0 (0.83) 0.5 (0.02) 0.7 (0.03) 3.8 (0.15) 4.0 (0.16) 5.3 (0.21) 6.5 (0.26) 5.3 (0.21) 6.5 (0.26) 2.9 (0.11) 3.1 (0.12) B15 -- LR4-190 19.9 (0.78) 22.1 (0.87) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.5 (0.22) 5.5 (0.22) 7.5 (0.30) 5.5 (0.22) 7.5 (0.30) 3.9 (0.15) 4.1 (0.16) B13 -- LR4-190S 19.9 (0.78) 22.1 (0.87) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.5 (0.22) 5.5 (0.22) 7.5 (0.30) 5.5 (0.22) 7.5 (0.30) 3.9 (0.15) 4.1 (0.16) B14 -- LR4-260 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B13 -- LR4-260S 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B14 -- LR4-380 24.0 (0.94) 26.0 (1.02) 0.6 (0.02) 1.0 (0.04) 6.9 (0.27) 7.5 (0.30) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 4.9 (0.19) 5.1 (0.20) B13 -- LR4-450 24.0 (0.94) 26.0 (1.02) 0.6 (0.02) 1.0 (0.04) 9.9 (0.41) 10.5 (0.39) 5.3 (0.21) 6.7 (0.26) 5.3 (0.21) 6.7 (0.26) 5.9 (0.23) 6.1 (0.24) B13 -- LR4-550 35.0 (1.38) 37.0 (1.46) 0.6 (0.02) 1.0 (0.04) 6.9 (0.27) 7.5 (0.30) 5.3 (0.21) 6.7 (0.26) 5.3 (0.21) 6.7 (0.26) 4.9 (0.19) 5.1 (0.20) B13 -- LR4-600 24.0 (0.95) 26.0 (1.02) 0.6 (0.02) 1.0 (0.04) 13.9 (0.55) 14.5 (0.57) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 5.9 (0.23) 6.1 (0.24) B13 -- LR4-730 27.1 (1.06) 29.1 (1.15) 0.6 (0.02) 1.0 (0.04) 13.9 (0.54) 14.5 (0.57) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 5.9 (0.23) 6.1 (0.24) B13 -- LR4-900 45.4 (1.79) 47.6 (1.87) 0.9 (0.04) 1.3 (0.05) 7.9 (0.31) 8.5 (0.33) 4.6 (0.18) 6.2 (0.24) 4.6 (0.18) 6.2 (0.24) 5.9 (0.23) 6.1 (0.24) B13 -- SRP120 19.9 (0.78) 22.1 (0.87) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 5.5 (0.22) 7.5 (0.30) 5.5 (0.22) 7.5 (0.30) 3.9 (0.15) 4.1 (0.16) B9 -- SRP120L 24.9 (0.98) 27.1 (1.07) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 5.5 (0.22) 7.5 (0.30) 10.5 (0.41) 12.5 (0.49) 3.9 (0.15) 4.1 (0.16) B9 -- SRP120S 19.9 (0.78) 22.1 (0.87) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 5.5 (0.22) 7.5 (0.30) 5.5 (0.22) 7.5 (0.30) 3.9 (0.15) 4.1 (0.16) B16 -- SRP175 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B9 -- SRP175L 29.9 (1.18) 32.1 (1.26) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 5.5 (0.22) 7.5 (0.30) 10.5 (0.41) 12.5 (0.49) 3.9 (0.15) 4.1 (0.16) B9 -- SRP175S 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B16 -- SRP175SS 20.9 (0.82) 23.1 (0.91) 0.6 (0.02) 1.0 (0.04) 4.9 (0.19) 5.2 (0.20) 4.1 (0.16) 5.5 (0.22) 4.1 (0.16) 5.5 (0.22) 3.9 (0.15) 4.1 (0.16) B17 -- SRP200 21.3 (0.84) 23.4 (0.92) 0.5 (0.02) 1.1 (0.04) 10.2 (0.40) 11.0 (0.43) 5.0 (0.20) 7.6 (0.30) 5.0 (0.20) 7.6 (0.30) 4.8 (0.19) 5.4 (0.21) B9 -- SRP350 28.4 (1.12) 31.8 (1.25) 0.5 (0.02) 1.1 (0.04) 13.0 (0.53) 13.5 (0.51) 6.3 (0.25) 8.9 (0.35) 6.3 (0.25) 8.9 (0.35) 6.0 (0.24) 6.6 (0.26) B9 -- SRP420 30.6 (1.20) 32.4 (1.28) 0.5 (0.02) 1.1 (0.04) 12.9 (0.51) 13.6 (0.54) 5.0 (0.20) 7.5 (0.30) 5.0 (0.20) 7.5 (0.30) 6.0 (0.24) 6.7 (0.26) B9 -- TAC170-09 16.5 (0.65) 17.5 (0.69) -- -- 0.9 (0.036) 9.5 (0.37) 10.5 (0.42) 9.4 (0.37) 10.0 (0.40) 5.0 (0.19) 5.2 (0.21) 0.8 (0.03) 1.2 (0.05) B12 -- TAC210 16.5 (0.65) 17.5 (0.69) -- -- 0.9 (0.036) 9.5 (0.37) 10.5 (0.42) 9.4 (0.37) 10.0 (0.40) 5.0 (0.19) 5.2 (0.21) 0.8 (0.03) 1.2 (0.05) B12 -- SRP TAC Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 273 4 Figures B19-B25. Typical Time-to-trip Curves at 20C for Strap Battery Devices VLR (data at 25C) Figure B19 A = VLR170 100 B = VLR175 C 10 C = VLR230 Time-to-trip (s) B A 1 0.1 C B A 0.01 0.001 1 100 10 Fault Current (A) VLP (data at 25C) Figure B20 A = VLP210 100 B = VLP220 Time-to-trip (s) 10 B A C 1 0.1 C B A 0.01 0.001 1 100 10 Fault Current (A) VTP (data at 25C) Figure B21 A = VTP170 100 B = VTP175 C = VTP200 D = VTP210G E = VTP240 D C B A 10 Time-to-trip (s) 4 C = VLP270 E 1 0.1 0.01 0.001 274 PolySwitch Strap Battery Resettable Devices A 1 10 Fault Current (A) E D C B 100 Raychem Circuit Protection Strap Battery Figures B19-B25. Typical Time-to-trip Curves at 20C for Strap Battery Devices continued LTP Figure B22 A = LTP070 100 B = LTP100 C = LTP180 A 10 B C D G E F E = LTP260 F = LTP300 G = LTP340 Time-to-trip (s) D = LTP190 1 A B CD 0.1 E F G 0.01 0.001 1 10 Fault Current (A) 100 4 LR4 Figure B23 A = LR4-170U 100 G H B = LR4-190 D = LR4-380 E = LR4-450 F = LR4-550 G = LR4-600 H = LR4-730 Typical time-to-trip (s) C = LR4-260 B C 10 F E D I H A G F E D 1 I C 0.1 B I = LR4-900 A 0.01 1 Raychem Circuit Protection 10 Fault Current (A) 100 PolySwitch Strap Battery Resettable Devices 275 Figures B19-B25. Typical Time-to-trip Curves at 20C for Strap Battery Devices continued SRP Figure B24 A = SRP120 100 B = SRP175 C = SRP200 10 Typical time-to-trip (s) D = SRP350 E = SRP420 C A D E B 1 0.1 C A D E B 0.01 10 Fault Current (A) 1 100 4 TAC & miniSMDE Figure B25 A = TAC100-09 100 B = TAC170-09 C = TAC210 C B Typical time-to-trip (s) D = miniSMDE190 10 D A 1 0.1 C 0.01 B A D 0.001 1 10 100 Fault Current (A) 276 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Table B5. Physical Characteristics and Environmental Specifications for Strap Battery Devices VLR Physical Characteristics Lead material 0.125mm nominal thickness, quarter-hard nickel Tape material Polyester Environmental Specifications Test Conditions Resistance Change Passive aging -40C, 1000 hours 5% 60C, 1000 hours 20% Humidity aging 60C/95% RH, 1000 hours 30% Thermal shock 85C, -40C (10 times) 5% Vibration MIL-STD-883D, Method 2026 No change VLP and VTP Physical Characteristics Lead material 0.125mm nominal thickness, quarter-hard nickel Tape material Polyester Environmental Specifications Test Conditions Resistance Change Passive aging -40C, 1000 hours 5% 60C, 1000 hours 10% Humidity aging 60C/95% RH, 1000 hours 10% Thermal shock 85C, -40C (10 times) 5% Vibration MIL-STD-883D, Method 2026 No change 4 LTP Physical Characteristics Lead material 0.125mm nominal thickness, quarter-hard nickel Tape material Polyester Environmental Specifications Test Conditions Resistance Change Passive aging 70C, 1000 hours 10% Humidity aging 85C/85% RH, 7 days 15% Vibration MIL-STD-883C, Test Condition A No change LR4 Physical Characteristics Lead material 0.125mm nominal thickness, quarter-hard nickel Tape material Polyester Environmental Specifications Test Conditions Resistance Change Passive aging 70C, 1000 hours 10% Humidity aging 85C/85% RH, 7 days 5% Vibration MIL-STD-883D, Method 2026 No change Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 277 Table B5. Physical Characteristics and Environmental Specifications for Strap Battery Devices continued SRP Physical Characteristics Lead material 0.125mm nominal thickness, quarter-hard nickel Tape material Polyester Environmental Specifications Test Conditions Resistance Change Passive aging 70C, 1000 hours 10% Humidity aging 85C/85% RH, 7 days 5% Vibration MIL-STD-883C, Test Condition A No change TAC Physical Characteristics Lead material 0.15mm nominal thickness, nickel-plated steel Molding material liquid crystal polymer Environmental Specifications 4 Test Conditions Resistance Change Passive aging 70C, 1000 hours 10% Humidity aging 85C/85% RH, 7 days 15% Vibration MIL-STD-883D, Method 2026 No change miniSMDE Physical Characteristics Termination pad materials Solder-plated copper Termination pad solderability Meets EIA specification RS186-9E, ANSI/J-STD-002 Category 3 Environmental Specifications Test Conditions Resistance Change Passive aging 60C, 1000 hours 5% typical 85C, 1000 hours 5% typical Humidity aging 85C/85% RH, 100 days 15% typical Thermal shock 85C, -40C (20 times) -33% typical 125C, -55C (10 times) -33% typical Vibration MIL-STD-883D, Method 2026 No change Reflow conditions 260C for 10-20 seconds Less than R1 MAX Tape and reel specifications Per EIA 481-1 N/A Note: Storage conditions: 40C max., 70% RH max.; devices should remain in original sealed bags prior to use. Devices may not meet specified values if these storage conditions are exceeded. 278 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Table B6. Packaging and Marking Information/Agency Recognition for Strap Battery Devices Part Number Bag Quantity 85C Typical Activation--VLR VLR170 VLR170U VLR175 VLR175L VLR230 VLR230S VLR230SU VLR230U 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 90C Typical Activation--VLP VLP210 VLP220 VLP270 90C Typical Activation--VTP VTP110 VTP170 VTP170SS VTP170X VTP170XS VTP175 VTP175U VTP175L VTP200G VTP200U VTP210G VTP210G-2 VTP210L VTP210L-2 VTP210S VTP210S-2 VTP210SL VTP210SL-2 VTP210SL-19.2/5.8 VTP210SL-19.2/5.8-2 VTP210SS VTP210ULD VTP240 Standard Package Part Marking -- -- -- -- -- -- -- -- 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 R17 -- R1X R1X R23 R23 -- -- UL, CSA,TUV UL, CSA,TUV UL UL UL, CSA,TUV UL, CSA,TUV UL, CSA,TUV UL, CSA,TUV 1,000 1,000 1,000 -- -- -- 10,000 10,000 10,000 W21 W22 W27 UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 -- 1,000 -- 1,000 -- 1,000 -- 1,000 -- 1,000 1,000 1,000 -- -- -- -- -- -- -- -- -- -- -- 5,000 -- 5,000 -- 5,000 -- 4,000 -- 4,000 -- -- -- 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 25,000 10,000 25,000 10,000 25,000 10,000 20,000 10,000 20,000 10,000 10,000 10,000 -- V17 V17 V17 V17 V1X -- V1X V20 -- V21 V21 V21 V21 V21 V21 V21 V21 V21 V21 V21 -- V24 UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV -- -- -- -- 4,000 -- 2,000 -- -- -- 2,000 -- 2,000 -- 10,000 10,000 10,000 10,000 20,000 40,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 L07 L07 L10 L10 L10 L10 L10 L10 L18 L18 L18 L18 L18 L19 UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV 110C Typical Activation--LTP, TAC, miniSMDE LTP070 2,000 LTP070S 2,000 LTP100 2,000 LTP100S 2,000 LTP100S-2 -- LTP100SL 2,000 LTP100SL-2 -- LTP100SS 2,000 LTP180 2,000 LTP180L 500 LTP180L-2 -- LTP180S 2,000 LTP180S-2 -- LTP190 500 Raychem Circuit Protection Tape & Reel Quantity Agency Recognition PolySwitch Strap Battery Resettable Devices 4 279 Table B6. Packaging and Marking Information/Agency Recognition for Strap Battery Devices continued Bag Quantity Part Number Tape & Reel Quantity 110C Typical Activation--LTP, TAC, miniSMDE, continued LTP260 1,000 -- LTP260-2 -- 2,000 LTP300 500 -- LTP340 500 -- miniSMDE190-2 -- 5,000 TAC100-09 2,000 -- Standard Package Part Marking 10,000 10,000 10,000 10,000 5,000 10,000 L26 L26 L30 L34 19 Blue* Agency Recognition UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL 120C Typical Activation--LR4, SRP, TAC LR4-170U 2,000 -- 10,000 NA UL, CSA, TUV LR4-190 2,000 -- 10,000 E19 UL, CSA, TUV LR4-190S 2,000 -- 10,000 E19 UL, CSA, TUV -- 4,000 20,000 E19 UL, CSA, TUV LR4-190S-2 4 LR4-260 1,000 -- 10,000 E26 UL, CSA, TUV LR4-260S 1,000 -- 10,000 E26 UL, CSA, TUV LR4-380 1,000 -- 10,000 E38 UL, CSA, TUV LR4-450 1,000 -- 10,000 E45 UL, CSA, TUV LR4-550 1,000 -- 10,000 E55 UL, CSA, TUV LR4-600 1,000 -- 10,000 E60 UL, CSA, TUV LR4-730 1,000 -- 10,000 E73 UL, CSA, TUV LR4-900 500 -- 10,000 E90 UL; (CSA and TUV pending) SRP120 2,000 -- 10,000 120 UL, CSA, TUV SRP120L 1,000 -- 10,000 120 UL, CSA, TUV SRP120S 2,000 -- 10,000 120 UL, CSA, TUV SRP175 2,000 -- 10,000 175 UL, CSA, TUV SRP175-2 -- 2,000 10,000 175 UL, CSA, TUV SRP175L 1,000 -- 10,000 175 UL, CSA, TUV SRP175S 2,000 -- 10,000 175 UL, CSA, TUV SRP175SS 2,000 -- 10,000 175 UL, CSA, TUV SRP200 500 -- 10,000 200 UL, CSA, TUV SRP200-2 -- 4,000 20,000 200 UL, CSA, TUV SRP350 500 -- 10,000 350 UL, CSA, TUV SRP420 500 -- 10,000 420 UL, CSA, TUV TAC170-09 2,000 -- 10,000 Black* UL, CSA TAC210 2,000 -- 10,000 White* UL, CSA, TUV -- 4,000 20,000 White* UL, CSA, TUV TAC210-2 *Color indicated is mold ring material color. Agency Recognition for Strap Battery Devices UL File # E74889 CSA File #78165C TUV Certificate number available on request 280 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Part Numbering System for Strap Battery Devices LTP 190 SS -2 Blank = Bulk 2 = Tape and reel packaging Modifier G = Global design (standard product) L = Long lead or leads S = Slit lead SS = Both leads slit X = Rotated chip U = Untaped Hold current indicator Product series VTP 210 SL 19.2/5.8 -2 Blank = Bulk 2 = Tape and reel packaging 19.2/5.8 = Maximum length of leads (mm) Modifier G = Global design (standard product) L = Long lead or leads S = Slit lead SS = Both leads slit X = Rotated chip U = Untaped 4 Hold current indicator Product series TAC 210 -09 -2 Blank = Bulk 2 = Tape and reel packaging 09 = Maximum thickness indicator Hold current indicator Product series Note: Tape and reel packaging not available for all devices. Contact your local Raychem Circuit Protection representative for additional information. Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 281 Table B7. Tape and Reel Specifications for TAC Series Devices (in Millimeters) Description Mark Dimensions (mm) Carrier tape width A 24.0 Tolerance (mm) 0.5 Sprocket hole pitch F 4.0 0.10 Embossed cavity pitch D 12.0 0.10 Ordinate to embossed cavity center E 2.0 0.2 Embossed cavity length (inside) -- 17.5 -- Embossed cavity width (inside) -- 10.4 -- Embossed cavity length (outside) -- 17.6 -- Sprocket hole diameter G 1.55 0.05 Abscissa to embossed cavity center -- 11.5 0.15 Sprocket hole location C 1.75 0.15 0.05 Carrier tape thickness -- 0.3 Cover tape thickness -- 0.055 -- Embossed cavity depth (inside) -- 1.35 0.1 Leader min. -- 800 -- Trailer min. -- 800 -- Reel diameter a 420 2 Hub diameter n 80 1 Reel width measured at inside hub W1 24.4 +2, -0 Reel width measured at outside hub W2 30.4 +3, -1 Figure B26. Taped Component Dimensions for TAC Series 4 B E OG F C A D Figure B27. Reel Dimensions for TAC Series W2 a n (hub dia.) Cover tape W1 Carrier tape Embossed cavity 282 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection Strap Battery Figure B28. Typical Taped Component Layout for Strap Battery Products Note: Contact your local Raychem Circuit Protection representative for dimensions and availabilty. Installation Guidelines for the Strap Family * Polymeric PTC devices operate by thermal expansion of the conductive polymer. If devices are placed under pressure or installed in spaces that would prevent thermal expansion, they may not properly protect against fault conditions. Designs must be selected in such a manner that adequate space is maintained over the life of the product. * Twisting, bending, or placing the PPTC device in tension will decrease the ability of the device to protect against electrical faults. No residual force should remain on device after installation. Mechanical damage to PPTC chip may affect device performance and should be avoided. * Chemical contamination of PPTC devices should be avoided. Certain greases, solvents, hydraulic fluids, fuels, industrial cleaning agents, volatile components of adhesives, silicones, and electrolytes can have an adverse effect on device performance. * PPTC strap devices are designed to be resistance welded to battery cells or to pack interconnect straps, yet some precautions must be taken when doing so. In order for the PPTC device to exhibit its specified performance, weld placement should be a minimum of 2mm from the edge of the PPTC chip, weld splatter must not touch the PPTC chip, and welding conditions must not heat the PPTC device above its maximum operating temperature. * PPTC strap devices are not designed for applications where reflow onto flex circuits or rigid circuit boards is required. * The polyester tape on PolySwitch strap devices is intended for marking and indentification purposes only, not for electrical insulation. Latest Information * Please visit us at www.circuitprotection.com or contact your local representative for the latest information. * The information in this Databook may contain some preliminary information. Raychem Circuit Protection, a divsion of Tyco Electronics, reserves the right to change any of the specifications without notice. In addition, Tyco Electronics reserves the right to make changes--without notification to Buyer--to materials or processing that do not affect compliance with any applicable specification. Raychem Circuit Protection PolySwitch Strap Battery Resettable Devices 283 4 WARNING: * Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. * The devices are intended for protection against occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. * Contamination of the PPTC material with certain silicon based oils or some aggressive solvents can adversely impact the performance of the devices. * Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommendated electronic, thermal, and mechanical procedures for electronic components. * Operation in circuit with a large inductance can generate a circuit voltage (L di/dt) above the rated voltage of the PolySwitch resettable device. 4 284 PolySwitch Strap Battery Resettable Devices Raychem Circuit Protection