SBR100-10J
No.7450-1/3
Application
•High frequency rectification (switching regulators,
converters, choppers).
Features
•Low reverse current.
•Low switching noise.
•High reliability due to highly reliable planar structure.
•Attachment workability ability is good by
Mica-less package.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Repetitive Peak Reverse Voltage VRRM 100 V
Nonrepetitive Peak Reverse Surge Voltage VRSM 105 V
Average Output Current IO50Hz resistive load, Tc=107°C10A
Surge Forward Current IFSM 50Hz sine wave, 1 cycle 80 A
Junction Temperature Tj --55 to +150 °C
Storage Temperature Tstg --55 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Reverse Voltage VRIR=2mA, Tj=25°C* 100 V
Forward Voltage VFIF=5A, Tj=25°C* 0.85 V
Reverse Current IRVR=50V, Tj=25°C* 100 µA
Interterminal Capacitance C VR=10V, Tj=25°C* 170 pF
Thermal Resistance (Junction-Case) Rth(j-c) Junction-Case : Smoothed DC 4.0 °C / W
Note : * Value per element
Schottky Barrier Diode(Twin Type · Cathode Common)
Ordering number : ENN7450
SBR100-10J
31504SD TS IM TA-100307
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
100V, 10A Rectifier
Package Dimensions
unit : mm
1320
[SBR100-10J]
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
1 : Anode
2 : Cathode
3 : Anode
SANYO : TO-220ML
1.6
1.2
0.75
14.0 16.0
10.0
18.1
5.6
3.2
7.2
3.5
2.55
2.55
2.4
4.5
2.8
0.7
2.55
2.55
2.4
123
SBR100-10J
No.7450-2/3
Electrical Connection
13
1 : Anode
2 : Cathode
3 : Anode
2
0
0.1
1.0
7
5
3
2
10
7
5
3
2
7
5
3
2
1.20.4 0.8
Forward Voltage, VF -- V
IF -- VF
Forward Current, IF -- A
IT05463
Rev erse Voltage, VR -- V
IR -- VR
Reverse Current, IR -- mA
IT05464
0
1.0
10
5
7
3
2
5
7
3
2
5
7
3
2
5
7
3
2
0.1
12020 40 60 80 100
Peak Reverse Voltage, VRM -- V
PR(AV) -- VRM
C -- VR
Average Reverse Power Dissipation, PR(AV) -- W
Interterminal Capacitance, C -- pF
IT05466
Average Forward Current, IO -- A
PF(AV) -- IO
Average Forward Power Dissipation, PF(AV) -- W
IT05465
0
0
2.5
0.5
1.0
1.5
2.0
0
2
4
6
8
12
10
14
11010 20 30 40 50 60 70 80 90 100
Rev erse Voltage, VR -- V
IT05468
1.0
10
1000
2
3
5
7
100
2
3
5
7
100
23 57
10 23 57
02468101214
Tj=150°C
25°C
Tj=
150
°
C typ
f=100kHz
(1)Rectangular wav
e θ
=300
°
(2)Rectangular wav
e θ
=240
°
(3)Rectangular wav
e θ
=180
°
(4)Sine wav
e θ
=180
°
(1)Rectangular wav
e θ
=60
°
(2)Rectangular wav
e θ
=120
°
(3)Rectangular wav
e θ
=180
°
(4)Sine wav
eθ
=180
°
(1)
(1)
(2)
(2)
(3)
(4)
(4)
(3)
180°
θ360°
360°
Rectangular
wave
Sine
wave
Rectangular
wave
Sine
wave
VR
VR
180°
θ360°
360°
Tc -- IO
Case Temperature, Tc -- °C
Average Output Current, IO -- A
IT05467
100
110
120
130
140
150
90
160
0246810 1412
(1)Rectangular wav
e θ
=60
°
(2)Rectangular wav
e θ
=120
°
(3)Rectangular wav
e θ
=180
°
(4)Sine wav
e θ
=180
°
(1) (2) (4) (3)
180°
θ360°
360°
Rectangular
wave
Sine
wave
125°C typ
100°C typ
75°C typ
SBR100-10J
No.7450-3/3
PS
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of March, 2004. Specifications and information herein are subject
to change without notice.
Rth(j - c) -- t
Transient Thermal Resistance Rth(j - c) -- °C / W
Time, t -- s
IT05470
0.001
0.1
10
2
3
5
7
1.0
2
3
5
7
23 57
0.01 23 57
0.1 23 57
1.0 23 235710
IFSM -- t
Surge Forward Current, IFSM(Peak) -- A
Time, t -- s
IT05469
0.01
0
10
20
30
40
50
70
60
80
90
23 57
0.1 1.0
23 2357
I
S
20ms
t
Current waveform 50Hz sine wave
