Evolution Dual Series
• 25A & 50A Output rating per channel @ 40°C
• 24 to 280 & 48 to 600VAC Operating voltage
• 4-15, 15-32 & 4-32VDC Control input options
• Four input termination options
• Zero-crossing (resistive loads) or random-fire (inductive loads)
output
• Input status LED indicator for each channel
• Available with IP20 “Touch-Safe” Covers
• UL508 Endurance Rating
PRODUCT SELECTION
Control Voltage 240V,25A 240V, 50A 480V, 25A 480V, 50A
4-15 VDC CD2425D1U CD2450D1U CD4825D1U CD4850D1U
15-32VDC CD2425E1U CD2450E1U CD4825E1U CD4850E1U
4-32 VDC CD2425W1U CD2450W1U CD4825W1U CD4850W1U
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description Cx2425xxxx Cx2450xxxx Cx4825xxxx Cx4850xxxx
Operating Voltage (47-440Hz) [Vrms] 24-280 24-280 48-600 48-600
Load Current Range (3) [Arms] 0.15-25 0.15-50 0.15-25 0.15-50
Transient Overvoltage [Vpk] 600 600 1200 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 500
Maximum 1 Cycle Surge Current (50/60) [Apk] 275/300 710/750 275/300 710/750
Maximum Surge Current 50Hz (20ms) [Apk] 275 710 275 710
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.3 1.3 1.3 1.3
Thermal Resistance Junction to Case (Rjc ) [°C/W] 0.65 0.33 0.65 0.33
Maximum I² t for Fusing 50/60Hz (1/2 cycle) [A² sec] 380/370 2520/2320 380/370 2520/2320
Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5
INPUT SPECIFICATIONS (1)
Description CxxxDxxx CxxxExxx CxxxWxxx
Control Voltage Range 4-15 VDC 15-32 VDC 4-32 VDC
Minimum Turn-On Voltage 4 VDC 15 VDC 4 VDC
Minimum T urn -Off Voltage 1 .0 VDC 1 .0 VDC 1 .0 VDC
Typical Input Current 16 mA @ 5 VDC 18 mA @ 24 VDC 10 mA @ 12 VDC
Nominal Input Impedance 300 Ohm 1500 Ohm See Note 5
Maximum Turn-On Time [msec] (4) 1/2 Cycle 1/2 Cycle 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms
Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range -40 to 80 °C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 3.0 oz (86.5 g)
Terminals Screw Type Output: 8-32
Max. Torque Output: 20 in lb (2.2Nm)
Max. Wire Size Output:2 x AWG 8 (3.8mm)
GENERAL NOTES
1) All parameters at 25°C and per section unless otherwise specified.
2) Off-state dv/dt test met hod per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, see derating curves.
4) Turn-on time for random turn-on (R) versions is 0.1 msec.
5) Input circuit incorporates acti ve current limit ation
WIRING DIAGRAM
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
E116950
Rev. 113011
ANNEX - ENVIROMENTAL INFORMATION
