TECH. CORP.
SPECIFICATIONS
CUSTOMER : PTC
SAMPLE CODE : SH320240T-009-I09Q
MASS PRODUCTION CODE :PH320240T-009-I09Q
SAMPLE VERSION :01
SPECIFICATIONS EDITION :003
DRAWING NO. (Ver.) :LMD-PH320240T-009-I09Q (Ver.003)
PACKAGING NO. (Ver.) :PKG-PH320240T-009-I09Q (Ver.002)
Customer Approved
Date:
Approved Checked Designer
廖志豪
Rex Liao 張慶源
Yuan Chang
黃俊清
Ackey Huang
□ Preliminary specification for design input
■ Specification for sample approval
POWERTIP TECH. CORP.
Headquarters: No.8, 6th Road, Taichung Industrial Park,
Taichung, Taiwan
台中市 407 工業區六路 8號
TEL: 886-4-2355-8168
FAX: 886-4-2355-8166
E-mail: sales@powertip.com.tw
Http://www.powertip.com.tw
NO.PT-A-005-8
POWERTIP
TW RD APR
2010.07.27
PH320240T-009-I09Q Page2 SAMPLE Ver.01
SPEC Edi.003
History of Version
Date
(mm / dd / yyyy) Ver. Edi. Description Page Design by
03/01/2010 01 001 New Drawing. - Ackey
04/21/2010 01 002 New Sample. - Ackey
07/26/2010 01 003 Add Pull Tape Appendix Ackey
Total: 26 Page
PH320240T-009-I09Q Page3 SAMPLE Ver.01
SPEC Edi.003
Contents
1. SPECIFICATIONS
1.1 Features
1.2 Mechanical Specifications
1.3 Absolute Maximum Ratings
1.4 DC Electrical Characteristics
1.5 Optical Characteristics
1.6 Backlight Characteristics
1.7 Touch Panel Characteristics
2. MODULE STRUCTURE
2.1 Counter Drawing
2.2 Interface Pin Description
2.3 Timing Characteristics
2.4 JUMPER(Setting different use)
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
3.2 Inspection Specification
4. RELIABILITY TEST
4.1 Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 Safety
5.2 Handling
5.3 Storage
5.4 Terms of Warranty
Appendix : LCM drawing
LCM Packaging Specifications
Note : For detailed information please refer to IC data sheet :
Primacy(TFT LCD): Himax: HX8218-A + HX8615 A
(Or compatible IC )
PH320240T-009-I09Q Page4 SAMPLE Ver.01
SPEC Edi.003
1. SPECIFICATIONS
1.1 Features
Main LCD panel
Item Standard Value
Display Type 320(R、G、B) * 240 Dots
LCD Type Normally white, Transmissive type
Screen size (inch) 5.7 inch
Viewing Direction 6 O’clock
Color configuration RGB-Strip
Backlight LED
Interface Digital 24-bits RGB
Other (controller/driver IC) Himax: HX8218-A + HX8615A
(Or compatible IC)
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side：
http://www.powertip.com.tw/news/LatestNews.asp
1.2 Mechanical Specifications
Item Standard Value Unit
Outline Dimension 159.4 (W) * 111.0 (L) * 12.6 (H)(Max) mm
LCD panel
Item Standard Value Unit
Viewing Area 116.2 (W) * 87.4 (L) mm
Active Area 115.2 (W) * 86.4 (L) mm
Touch panel
Item Standard Value Unit
Viewing Area 119.1 (W) * 93.8 (L) mm
Active Area 116.2 (W) * 87.4 (L) mm
Note：For detailed information please refer to LCM drawing.
PH320240T-009-I09Q Page5 SAMPLE Ver.01
SPEC Edi.003
1.3 Absolute Maximum Ratings
Module
Item Symbol Condition Min. Max. Unit
System Power Supply Voltage VDD AVSS=0 -0.3 7.0 V
Input Voltage Vi - -0.3 VDD+0.3 V
Operating Temperature TOP Excluded T/P -20 70 °C
Storage Temperature TST Excluded T/P -30 80 °C
1.4 DC Electrical Characteristics
Module GND = 0V, Ta = 25°C
Item Symbol Condition Min. Typ. Max. Unit
Power Supply Voltage1 VDD - 3.0 3.3 3.6 V
VDD = 3.3 V
Pattern=full display - 90 - mA
Supply Current IDD VDD = 3.3 V
Pattern= black *1 - 95 140 mA
Note1:Maximum current display
PH320240T-009-I09Q Page6 SAMPLE Ver.01
SPEC Edi.003
1.5 Optical Characteristics
TFT LCD Module VDD=3.3V, Ta=25°C
Item Symbol Condition Min. Typ. Max. unit
Response time Tr+ Tf Ta = 25°C
θX, θY = 0°- 44 66 ms Note2
Top θY+ - 45 -
Bottom θY- - 50 -
Left θX- - 50 -
Viewing angle
Right θX+
CR ≥ 10
- 50 -
Deg. Note4
Contrast ratio CR 200 250 - - Note3
X 0.24 0.29 0.34
White Y 0.29 0.34 0.39
X 0.56 0.61 0.66
Red Y 0.32 0.37 0.42
X 0.28 0.33 0.38
Green Y 0.55 0.60 0.65
X 0.09 0.14 0.19
Color of CIE
Coordinate
（With B/L & touch
panel）
Blue Y
Ta = 25°C
θX , θY = 0°
0.05 0.08 0.13
-
Average Brightness
Pattern=white display
(With B/L & touch panel)
IV IF=200 mA
140 170 - cd/m2
Uniformity
(With B/L & touch panel) △B IF=200 mA 70 - - %
Note1
PH320240T-009-I09Q Page7 SAMPLE Ver.01
SPEC Edi.003
Note 1:
*1：△B=B(min) / B(max) * 100%
*2：Measurement Condition for Optical Characteristics:
a：Environment: 25 ±℃5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp
current and typical operating frequency.
b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°)
c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation.
d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4%
To be measured at the center area of panel with a viewing cone of 1° by Topcon
luminance meter BM-7, after 10 minutes operation (module)
Note2: Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
Amplitudes.
Refer to figure as below:
Normally White
1 2
3
6 5 4
7
8
9
VIEW AREA
LCM
θθ
Colorimeter=BM-7 fast
500 ㎜
100%
90%
10%
0%
Signal (Relative value)
"Black"
Tr Tf
"White" "White"
PH320240T-009-I09Q Page8 SAMPLE Ver.01
SPEC Edi.003
Normally Black
Note3: Definition of contrast ratio:
Contrast ratio is calculated with the following formula
Photo detector output when LCD is at “White” state
Contrast ratio (CR) =
Photo detector output when LCD is at “Black” state
Note4: Definition of viewing angle:
Refer to figure as below:
θ X - = 90 °
θ Y - = 90 °
X -
Y -
θ Y + = 90 °
θ X + = 90 °
X +
θ Y - θ Y +
θ X - θ X +
Y +
θ X = θ Y = 0°
Φ
Φ = 0 °
6 H
Φ = 270 °
Φ = 9 0 °
Φ = 180 °
12H
100%
90%
10%
0%
Signal (Relative value)
"Black"
Tr Tf
"White""Black"
PH320240T-009-I09Q Page9 SAMPLE Ver.01
SPEC Edi.003
1.6 Backlight Characteristics
Maximum Ratings
Item Symbol Conditions Min. Max. Unit
Forward Current IF Ta =25℃ - 200 mA
Power Dissipation PD Ta =25℃ - 2.4 W
Electrical / Optical Characteristics
Item Symbol Conditions Min. Typ. Max. Unit
Forward Voltage VF 6.0 6.8 8.5 V
Average Brightness
(without LCD) IV
IF= 200 mA
3800 4500 - cd/m2
Color White
Internal Circuit Diagram
PH320240T-009-I09Q Page10 SAMPLE Ver.01
SPEC Edi.003
1.7 Touch Screen Characteristic
Item Specification
Input Method Finger or stylus pen.
ITO Glass T=1.1mm , 500Ω/□ ±150 Ω
ITO Film T=0.175mm , 500Ω/□ ±150 Ω Non-Glare Type
Operating Temperature -0 ~℃50 ,℃20~90%RH(Except for dew gathering.)
Storage Temperature -20 ~℃60 ,℃20~80%RH(Except for dew gathering.)
Surface Hardness 3H- pressure 150gf , 45deg.
Hitting Durability 1,000,000 times min. (Tip R 8 mm)
Pen Sliding Durability 100,000 times min. (Tip R0.8mm)
Insulation Impedance DC25V 1min,20MΩ↑
Light Transparency 78%min.
Linearity ±1.5% (±3.0% After environmental and life test)
Operating Force 130gf least input with stylus pen (R0.8mm) or input with finger(R 8.0mm)
Bouncing <10ms
Impact Resistance No damage when ψ9mm steel ball is dropped on the surface from 30 cm
height at 1 time.
Flexible Pattern Heat
Seal Peeling Strength 500gf/cm ( peeling upward by 90 deg.)
Flexible Pattern Bending
Resistance
Bending 3 times by bending radius R1.0 mm.
The requirements in 4-2 shall be satisfied
Flexible Pattern
Insert/Pull
Out Resistance
5 times at least. The requirements in 4-2 shall be satisfied.
Vibration Resistance
Not in operation: The requirements in 3 to 4 shall be satisfied after
sweep vibration of 2G 10~55Hz(1 min.) is given for 30 min. each in
the directions of X, Y, Z.
Package Drop No damage to the product.(1corner edge, 2 ridges, 4 surfaces, drop
from 50 cm height 65 cm for the bottom)
Static load resistance
After 4.5Kg load is applied to
The center area(25cm²)of the
Touch panel, the requirements
in 3 and 4,shall be satisfied.
PH320240T-009-I09Q Page11 SAMPLE Ver.01
SPEC Edi.003
2. MODULE STRUCTURE
2.1 Counter Drawing
2.1.1 LCM Mechanical Diagram
* See Appendix
2.1.2 Block Diagram
PH320240T-009-I09Q Page12 SAMPLE Ver.01
SPEC Edi.003
2.2 Interface Pin Description
Pin No. Symbol Function
1 VDD
2 VDD
3 VDD
4 VDD
Analog power.
5 VSYNC Vertical sync input.
6 ENB Data enable control.
7 VSS Ground.
8 DCLK Dot data clock .
9 VSS Ground.
10 HSYNC Horizontal sync input.
11 B7 data bit B7.
12 B6 data bit B6.
13 B5 data bit B5.
14 B4 data bit B4.
15 B3 data bit B3.
16 B2 data bit B2.
17 B1 data bit B1.
18 B0 data bit B0.
19 G7 data bit G7.
20 G6 data bit G6.
21 G5 data bit G5.
22 G4 data bit G4.
23 G3 data bit G3.
24 G2 data bit G2.
25 G1 data bit G1.
26 G0 data bit G0.
27 R7 data bit R7.
28 R6 data bit R6.
29 R5 data bit R5.
30 R4 data bit R4.
31 R3 data bit R3.
32 R2 data bit R2.
33 R1 data bit R1.
PH320240T-009-I09Q Page13 SAMPLE Ver.01
SPEC Edi.003
Interface Pin Description(CONT.)
Pin No. Symbol Function
34 R0 data bit R0.
35 VSS Ground.
36 VSS Ground.
37 NC No use..
38 NC No use.
39 NC No use.
40 NC No use.
Backlight Pin Description
Pin No. Symbol Function
1 A Power supply for LED Backlight anode input.
2 NC No use.
3 K Power supply for LED Backlight cathode input.
Touch Panel Pin Description
Pin No. Symbol Function
1 Y- BOTTOM.(YU)
2 X+ RIGHT.(XR)
3 Y+ TOP.(YD)
4 X- LEFT.(XL)
PH320240T-009-I09Q Page14 SAMPLE Ver.01
SPEC Edi.003
2.3 Timing Characteristics
Signal Item Symbol Min. Typ. Max. Unit
Frequency Dclk 6.4 MHz
High Time Tch 78 ns
Dclk
Low Time Tcl 78 ns
Setup Time Tds 12 ns
Data Hold Time Tdh 12 ns
Period TH 408 DCLK
Pulse Width Thp 30 DCLK
Back-Porch Thb 38
DCLK
Display Period Thd 320 DCLK
Hsync
Front-Porch Thf 20
DCLK
NTSC 262.5
Period PAL Tv 312.5 TH
Pulse Width Tvp 1 3 5 TH
NTSC 15
Back-Porch PAL Tvb 23 TH
Display Period Tvd 240 TH
NTSC 4.5
Vsync
Front-Porch PAL Tvf 46.5 TH
TCLK
DCLK
DATA
TCH
2.64V
0.66V
2.64V
0.66V
TDS TDH
TCL
PH320240T-009-I09Q Page15 SAMPLE Ver.01
SPEC Edi.003
VSYNC
TV
HSYNC
TVP TVB TVD TVF
TH
HSYNC
DCLK
DATA
THP TCLK
THB THD THF
Valid Data
Blacking Data
DCLK
Blacking Data
Blacking Data
DATA(R)
DATA(G)
DATA(B)
ENB
R0 R2R1 R3 R4 R5
G0 G1 G2 G3 G4 G5
B0 B1 B2 B3 B4 B5
PH320240T-009-I09Q Page16 SAMPLE Ver.01
SPEC Edi.003
Color Data Assignment
2.4 JUMPER(Setting different use)
(J1-1J2-2,J3-2,J4-1,J5-1,J6-2)
PH320240T-009-I09Q Page17 SAMPLE Ver.01
SPEC Edi.003
3. QUALITY ASSURANCE SYSTEM
3.1 Quality Assurance Flow Chart
Item Customer Sales R&D Q.A Manufactu
ring
Product
control Purchase Inventory
control
Marketing
&
Design
Sample
Approval
Pilot
Run
&
Mass
Product
Ship
Out
OK
Request
Info Survey
Inquiry Project evaluation
Project Validatio
n
Quote OK
NG
Contract
Design chec
k
Sample test
Verificatio
n
Sam
p
le a
pp
roval
NG
NG
Pilot run & Reliabilit
y
test
Verificatio
n
S
p
ecification
p
re
p
aration
OK
Mass
p
roduction
Ins
p
ection NG
OK
Shi
p
ment
NG
Shi
p
out
OK
PH320240T-009-I09Q Page18 SAMPLE Ver.01
SPEC Edi.003
Item Customer Sales R&D Q.A Manufact
uring
Product
control Purchase Inventory
control
Sales
Service
Q.A
Activity
1. ISO 9001 Maintenance Activities 2. Process improvement proposal
3. Equipment calibration 4. Education And Training Activities
5. Standardization Management
Info Clai
m
Failure anal
y
sis
Corrective action
Trackin
g
Anal
y
sis re
p
ort
PH320240T-009-I09Q Page19 SAMPLE Ver.01
SPEC Edi.003
3.2. Inspection Specification
PH320240T-009-I09Q Page20 SAMPLE Ver.01
SPEC Edi.003
PH320240T-009-I09Q Page21 SAMPLE Ver.01
SPEC Edi.003
PH320240T-009-I09Q Page22 SAMPLE Ver.01
SPEC Edi.003
PH320240T-009-I09Q Page23 SAMPLE Ver.01
SPEC Edi.003
PH320240T-009-I09Q Page24 SAMPLE Ver.01
SPEC Edi.003
PH320240T-009-I09Q Page25 SAMPLE Ver.01
SPEC Edi.003
4. RELIABILITY TEST
4.1 Reliability Test Condition
NO. TEST ITEM TEST CONDITION
1 High Temperature
Storage Test Keep in +80 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
2 Low Temperature
Storage Test Keep in -30 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
3 High Temperature /
High Humidity
Storage Test
Keep in +60℃ / 90% R.H duration for 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
(Excluding the polarizer)
4 Temperature Cycling
Storage Test
-30℃ → +25℃ → +80℃ → +25℃
(30mins) (5mins) (30mins) (5mins)
10 Cycle
Surrounding temperature, then storage at normal condition 4hrs.
Air Discharge:
Apply 2 KV with 5 times
Discharge for each polarity +/-
Contact Discharge:
Apply 250 V with 5 times
discharge for each polarity +/-
5 ESD Test
1. Temperature ambiance : 15℃∼35℃
2. Humidity relative : 30%∼60%
3. Energy Storage Capacitance(Cs+Cd) : 150pF±10%
4. Discharge Resistance(Rd) : 330Ω±10%
5. Discharge, mode of operation :
Sin
g
le Dischar
g
e (time between successive dischar
g
es at least 1 sec)
(Tolerance if the output voltage indication : ±5%)
6
V ibration Test
(Packaged)
1. Sine wave 10∼55 Hz frequency (1 min)
2. The amplitude of vibration :1.5 mm
3. Each direction (X、Y、Z) duration for 2 Hrs
7 Drop Test
(Packaged)
Drop direction :※1 corner / 3 edges / 6 sides each 1times
Packing Weight
(Kg) Drop Height (cm)
0 ~ 45.4 122
45.4 ~ 90.8 76
90.8 ~ 454 61
Over 454 46
(Ver.B01)
PH320240T-009-I09Q Page26 SAMPLE Ver.01
SPEC Edi.003
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
5.1.2 If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1 Avoid any strong mechanical shock which can break the glass.
5.2.2 Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
5.2.3 Do not remove the panel or frame from the module.
5.2.4 The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
5.2.5 Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
5.2.6 Do not touch the display area with bare hands , this will stain the display area.
5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
5.2.8 To control temperature and time of soldering is 320±10℃and 3-5 sec.
5.2.9 To avoid liquid (include organic solvent) stained on LCM .
5.3 STORAGE
5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃
and the humidity is below 65% RH.
5.3.2 Do not place the module near organics solvents or corrosive gases.
5.3.3 Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1 Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
5.4.2 Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
