CPH6603
Rev.0 I Page 1 of 4 I www.onsemi.com
Features
•Low ON-resistance.
•Ultrahigh-speed switching.
•4V dri ve.
Ordering number : ENN7146
Package Dimensions
unit : mm
2202
[CPH6603]
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Drain-to-Source Voltage VDSS --30 V
Gate-to-Source Voltage VGSS ±20 V
Drain Current (DC) ID--1.5 A
Drain Current (Pulse) IDP PW≤10µs, duty cycle≤1% --6.0 A
Allowable Power Dissipation PD
Mounted on a ceramic board (900mm
2
✕0.8mm)1unit
0.9 W
Channel Temperature Tch 150 °C
Storage Temperature Tstg --55 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Drain-to-Source Breakdown Voltage V(BR)DSS ID=--1mA, VGS=0 --30 V
Zero-Gate Voltage Drain Current IDSS VDS=--30V, VGS=0 --1 µA
Gate-to-Source Leakage Current IGSS VGS=±16V, VDS=0 ±10 µA
Cutoff Voltage VGS(off) VDS=--10V, ID=--1mA --1.2 --2.6 V
Forward T ransfer Admittance yfsVDS=--10V, ID=--0.8A 1.0 1.5 S
RDS(on)1 ID=--0.8A, VGS=--10V 190 250 mΩ
Static Drain-to-Source On-State Resistance
RDS(on)2 ID=--0.4A, VGS=--4V 330 460 mΩ
Marking : FN Continued on next page.
1 : Source1
2 : Gate1
3 : Drain2
4 : Source2
5 : Gate2
6 : Drain1
SANYO : CPH6
0.05
0.9
0.7 0.2 1.6 0.60.6
0.95
123
654
2.8
0.2
2.9 0.15
0.4
CPH6603 P-Channel Silicon MOSFET
Ultrahigh-Speed Switching Applications
© 2011, SCILLC. All rights reserved.
Jan-2011, Rev. 0 www.onsemi.com Publication Order Number:
CPH6603/D
CPH6603
Rev.0 I Page 2 of 4 I www.onsemi.com
Continued from preceding page. Ratings
Parameter Symbol Conditions min typ max Unit
Input Capacitance Ciss VDS=--10V, f=1MHz 185 pF
Output Capacitance Coss VDS=--10V, f=1MHz 30 pF
Reverse T ransfer Capacitance Crss VDS=--10V, f=1MHz 20 pF
Turn-ON Delay Time td(on) See specified Test Circuit. 7 ns
Rise T ime trSee specified Test Circuit. 4 ns
Turn-OFF Delay Time td(off) See specified Test Circuit. 22 ns
Fall T ime tfSee specified Test Circuit. 8 ns
Total Gate Charge Qg VDS=--10V, VGS=--10V, ID=--1.5A 4.7 nC
Gate-to-Source Charge Qgs VDS=--10V, VGS=--10V, ID=--1.5A 0.8 nC
Gate-to-Drain “Miller” Charge Qgd VDS=--10V, VGS=--10V, ID=--1.5A 0.7 nC
Diode Forward Voltage VSD IS=--1.5A, VGS=0 --0.88 --1.5 V
Electrical Connection Switching Time Test Circuit
PW=10µs
D.C.≤1%
P.G 50Ω
G
S
D
ID= --0.8A
RL=18.7Ω
VDD= --15V
VOUT
CPH6603
VIN
0V
--10V
VIN
0
--0.2
--0.4
--1.0
--1.2
--1.4
--2.0
--1.6
--1.8
--0.8
--0.6
0--0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0
VDS= --10V
25°C
--25°C
Ta=75°C
IT02666
Static Drain-to-Source
On-State Resistance, RDS(on) -- mΩ
Ambient Temperature, Ta -- °C
Gate-to-Source Voltage, VGS -- V
RDS(on) -- VGS
Static Drain-to-Source
On-State Resistance, RDS(on) -- mΩ
Gate-to-Source Voltage, VGS -- V
ID -- VGS
Drain Current, ID -- A
Drain-to-Source Voltage, VDS -- V
ID -- VDS
Drain Current, ID -- A
0--1--2--3 --4 --5 --6
200
100
300
400
500
600
700
800
0
200
100
300
400
500
600
0
--7 --8 --9 --10
IT04058
0
0
--0.2
--0.4
--1.0
--1.2
--1.4
--2.0
--1.6
--1.8
--0.2
--0.8
--0.6
--0.5 --1.0--0.8 --0.9--0.1 --0.3 --0.4 --0.6 --0.7
VGS= --3V
--10V
--5V
--6V
--8V
IT04057
--4V
RDS(on) -- Ta
IT04059
ID= --0.4A, VGS= --4V
ID= --0.8A, VGS= --10V
--60 --40 --20 0 20 40 60 80 100 120 140 160
Ta=25°C
ID= --0.4A --0.8A
654
123
1 : Source1
2 : Gate1
3 : Drain2
4 : Source2
5 : Gate2
6 : Drain1
Top view
CPH6603
Rev.0 I Page 3 of 4 I www.onsemi.com
IT02670
0--0.6--0.4--0.2 --0.8 --1.0 --1.2 --1.4
--0.01
--10
--1.0
--0.1
7
7
5
5
3
3
2
2
7
5
3
2
VGS=0
--25°C
25°C
Ta=75°C
IT02669
--0.01
0.1 --0.1
23 57 --1.0
23 57 23
1.0
7
5
3
2
3
2
VDS= --10V
75°C
25°C
Ta= --25°C
y
fs -- ID
Drain Current, ID -- A
Forward Transfer Admittance,
y
fs -- S
Diode Forw ard Voltage, VSD -- V
Forward Current, IF -- A
IF -- VSD
Drain Current, ID -- A
SW Time -- ID
Switching Time, SW Time -- ns
Drain-to-Source Voltage, VDS -- V
Ciss, Coss, Crss -- VDS
Ciss, Coss, Crss -- pF
Total Gate Charge, Qg -- nC
VGS -- Qg
Gate-to-Source Voltage, VGS -- V
A S O
Drain-to-Source Voltage, VDS -- V
Drain Current, ID -- A
Ambient Temperature, Ta -- °C
PD -- Ta
Allowable Power Dissipation, PD -- W
0
10 --5
100
1000
7
5
3
2
7
5
3
2
--30--10 --15 --20 --25
f=1MHz
Ciss
Coss
Crss
IT02671
--0.1 --1.0
357 2357 23
100
7
5
3
2
2
10
1.0
7
5
3
VDD= --15V
VGS= --10V
td(on)
td(off)
tr
tf
IT02672
100ms
DC operation
1ms
10ms
IDP= --6A
2
3
5
7
2
3
5
7
2
3
5
7
--10
--1.0
--0.1
--0.01 23 57 23 57 23 5
--0.1 --1.0 --10 IT04061
<10µs
Operation in this area
is limited by RDS(on).
ID= --1.5A
0
0
--2
--4
--6
--8
5.04.53.5 4.02.0 2.5 3.01.00.5 1.5
--10
VDS= --10V
ID= --1.5A
IT04060
0.2
0.4
0.6
0.8
0.9
1.0
0020406080100120 140 160
IT04062
Mounted on a ceramic board(900mm
2
✕0.8mm)1unit
Ta=25°C
Single pulse
Mounted on a ceramic board(900mm
2
✕0.8mm)1unit
CPH6603
Rev.0 I Page 4 of 4 I www.onsemi.com CPH6603/D
 
    
   !"# $%

&!'#'"# ! ! ' ( ( ' ! ) * $% +
*& ! ' # '"#  !! ' ( ( ' # )  * $% +

&,
   
& !!'" "'-)*
$%+
 
&
.& (" #-! "-!
 !  !
.& ''##' !
"  #$
&
www.onsemi.com
" 
&./&++000+
*   /  1 
 2/
%!" "&' ""
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply
high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design. "Typical" parameter s which may be provided in SCILLC data sheets and/or specifications
can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals," must be validated for each customer application by customer’s
technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and
products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create
a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or u nauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.