!Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) Murata Manufacturing Co., Ltd. Cat.No.P16E-18 P16E.pdf 08.3.3 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. for EU RoHS Compliant * * * All the products in this catalog comply with EU RoHS. EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. CONTENTS 1 CERALOCKr and "CERALOCK" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Selection Guide 2 2 Part Numbering 1 MHz Chip Type -Tight Frequency Tolerance for AutomotiveApplication Circuits Utilization 3 4 6 3 2 MHz Chip Type -Standard Frequency Tolerance for AutomotiveApplication Circuits Utilization 7 11 MHz Chip Type Notice (Soldering and Mounting) for Automotive 12 MHz Chip Type Notice for Automotive 13 MHz Chip Type Packaging for Automotive 14 4 3 MHz Chip Type -Tight Frequency Tolerance for General Usage- 16 5 Application Circuits Utilization 4 MHz Chip Type -Standard Frequency Tolerance for General UsageApplication Circuits Utilization 20 21 26 5 MHz Lead Type -Standard Frequency Tolerance for General Usage- 28 6 kHz Chip Type -Standard Frequency Tolerance for General Usage- 30 7 kHz Lead Type -Standard Frequency Tolerance for General Usage- 32 MHz Chip Type Notice (Soldering and Mounting) for General Usage 34 MHz Chip Type Notice for General Usage 38 MHz Lead Type Notice for General Usage 39 kHz Type Notice for General Usage 40 MHz Chip Type Packaging for General Usage 43 MHz Lead Type Packaging for General Usage 46 kHz Type Packaging for General Usage 49 Recycled Paper 6 7 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Selection Guide Start Applications High Speed USB (high-precision) Consumer Automotive Functions Functions Card (small, low-profile) Frequencies Full Speed USB (high-precision) Other Automotive Usage MHz kHz SMD SMD CSTCE_XTpppp CSTCR_G15Lpp 24.00-27.20 /30.00MHz 6.00MHz Automotive Network (high-precision) General Usage SMD SMD Leaded SMD Leaded SMD CSTCE_G CSBFB_J CSBLA_E CSTCC_G CSTLS_G 8.00-13.99MHz 430-519kHz 375-429kHz 2.00-3.99MHz 3.40-10.00MHz CSTCE_G15Lpp CSTCE_V CSBFB_J CSBLA_E CSTCR_G CSTLS_X 12.00MHz 14.00-20.00MHz 700-1250kHz 430-509kHz 4.00-7.99MHz 16.00-70.00MHz CSTCE_V13Lpp CSTCG_V CSBLA_E CSTCE_G 16.00MHz 20.00-33.86MHz 510-699kHz 8.00-13.99MHz CSTCW_X11ppp CSTCW_X_M CSALS_X 16.00-70.00MHz (Two Terminals) CSTCC_G_A CSTCR_G15Cpp 2.00-3.99MHz 4.00-7.99MHz 8.00-13.99MHz CSTCE_G_A CSTCE_V13Cpp 8.00-13.99MHz CSBLA_J CSTCE_V CSTCE_V_C 14.00-20.00MHz 14.00-20.00MHz CSTCZ_X12Rpp CSTCW_X CSTCV_X_Q 48.00MHz 20.01-70.00MHz 20.01-70.00MHz CSACW_X CSACV_X_Q 20.01-70.00MHz (Two Terminals) 20.01-70.00MHz (Two Terminals) 25.00-48.00MHz 4.00-7.99MHz CSTCR_G_B CSTCE_G15Cpp 700-1250kHz 24.00MHz SMD 14.00-20.00MHz The kHz resonators have only two terminals. p: Alphanumerics express individual specification Notice) "CERALOCKr for general usage" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics, Physical Characteristics and so on. Please choose either "for general usage" or "for automotive" according to the required specification. 2 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o Part Numbering CERALOCKr (MHz) (Part Number) qProduct ID CS T CE 16M0 q w e r 3 *** -R0 t y u i o V 5 Product ID CS Ceramic Resonators wFrequency/Capacitance yInitial Frequency Tolerance Code Design 5 0.5% 3 0.3% 2 0.2% Code Frequency/Capacitance 1 0.1% A MHz No capacitance built-in H 0.07% T MHz Built-in Capacitance K -0.025/0.02% eStructure/Size uLoad Capacity Code Structure/Size Code Design LS Round Lead Type 1 3/5/6pF CC Cap Chip Type 2 10pF CR/CE/CG Small-cap Chip Type 3 15pF CV Monolithic Chip Type 4 22pF CW/CZ Small Monolithic Chip Type 5 30/33/39pF 6 47pF rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". tDesign Code Design Gpp Thickness Shear mode iIndividual Specification Code Individual Specification *** Three-digit alphanumerics express "Individual Specification". With standard products, "iIndividual Specification" is omitted, and "oPackaging" is carried up. T/Vpp Thickness Expander mode Xpp Thickness Expander mode (3rd overtone) pp indicates initial frequency tolerance and load capacity. oPackaging Packaging Code -B0 Bulk -A0 Radial Taping H0=18mm -R0 Plastic Taping o=180mm -R1 Plastic Taping o=330mm Radial taping is applied to lead type and plastic taping to chip type. CERALOCKr (kHz) (Part Number) qProduct ID CS B FB 500K J58 *** -R1 q w e r t y u Product ID CS Ceramic Resonators wFrequency/Capacitance tDesign Code Design Epp Area Expansion mode Jpp Area Expansion mode (Closed Type) pp indicates initial frequency tolerance and load capacitance. Code Frequency/Capacitance B kHz No capacitance built-in yIndividual Specification Code Individual Specification *** Three-digit alphanumerics express "Individual Specification". eStructure/Size Code Structure/Size LA Two-Terminal Lead Type FB SMD Type rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz". In case of 1.0MHz (1000kHz) or above, expressed by three figures and capital letter "M" for decimal point. With standard products, "yIndividual Specification" is omitted, and "uPackaging" is carried up. uPackaging Code Packaging -B0 Bulk -R1 Plastic Taping o=330mm 3 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) 1 MHz Chip Type -Tight Frequency Tolerance for Automotive1.4 max. 0.20.2 0.60.05 1.10.1 4.1 max. 0.4 (ref.) 0.4 (ref.) 0.4 (ref.) (3) (2) 0.40.1 (1) 0.40.1 0.40.1 : EIAJ Monthly Code CSTCR_G15C 4.00-7.99MHz 0.750.1 Features 1. The series are high accuracy resonators whose total tolerance is available for less than +-3,000ppm. 2. The series has high reliability and is available for wide temperature range. 3. Oscillation circuits do not require external load capacitors. 4. The series is available for a wide temperature range. 5. The resonators are extremely small and have a low profile. 6. No adjustment is necessary for oscillation circuits. 1.50.1 1.50.1 (in mm) 1.1 max. 1.30.15 0.100.10 3.20.15 0.40.1 0.10.1 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_G15C 8.00-13.99MHz Applications (in mm) 0.40.1 1. Cluster panel and Control panel 2. Safety control (Anti-lock Brake System, Electronic Stability Control, Airbag, etc.) 3. Engine ECU, Electronic Power Steering, Immobilizer, etc. 4. Car Air-conditioner, Power window, Remote Keyless Entry system, etc. 5. Intelligent Transportation System (Lane Keeping System, Millimeter wave radar, etc.) 6. Battery control for hybrid car 1.20.1 1.20.1 1.1 max. 1.30.15 0.100.10 3.20.15 0.40.1 0.10.1 0.90.1 3.0 max. 0.5 (ref.) 0.5 (ref.) 0.5 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 : EIAJ Monthly CSTCE_V13C 14.00-20.00MHz Code 0.40.1 1.20.1 1.20.1 (in mm) Part Number Oscillating Frequency (MHz) Initial Tolerance Temp. Stability (%) Temperature Range (C) CSTCR_G15C 4.00 to 7.99 0.1% 0.13 -40 to 125 CSTCE_G15C 8.00 to 13.99 0.1% 0.13 -40 to 125 CSTCE_V13C 14.00 to 20.00 0.1% 0.13 -40 to 125 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 4 2.00.1 0.700.10 Chip type "CERALOCK" with built-in load capacitors in an extremely small package provides high accuracy. MURATA's frequency adjustment and package technology expertise has enabled the development of the chip "CERALOCK" with built-in load capacitors. Chip "CERALOCK" for automotive has achieved importance in the worldwide automotive market. This diverse series owes its development to MURATA's original mass production techniques and high reliability. 0.300.20 4.50.1 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oscillation Frequency Measuring Circuit 1 VDD 5pF To Frequency Counter Rf 1M Rd (1) (3) C1 C2 (2) Standard Land Pattern Dimensions CSTCR_G15C 0.4 0.4 1.1 CSTCE_G15C 1.1 0.4 0.8 0.4 0.8 0.4 2.6 1.90 ~ 2.10 0.4 1.2 1.5 1.5 1.2 Land Pattern Land Pattern (in mm) (in mm) Oscillation Frequency Temperature Stability CSTCE_V13C CSTCR_G15C +0.2 0.4 0.8 0.4 Oscillating Frequency Shift (%) 0.8 1.90 ~ 2.10 0.4 1.2 1.2 +0.1 0 -0.1 Land Pattern -0.2 -60 -40 -20 0 CSTCE_G15C +60 +80 +100 +120 +140 +80 +100 +120 +140 +0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +40 CSTCE_V13C +0.2 +0.1 0 -0.1 -0.2 -60 +20 Temperature (C) (in mm) -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) 5 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Application Circuits Utilization 1 TMP92CD54IF (Toshiba) MB90F387 (Fujitsu) 16-bit Microcomputer Vcc3=3.3V 16-bit Microcomputer Vcc5=5.0V Vcc=5.0V H2 H 0.1F H1 IC : TMP92CD54IF 74 72 IC : MB90F387 L 28 H1: 36, 68, 86 H2: 2, 4, 15, 40, 50, 61, 75 L: 1, 3, 13, 38, 51, 63, 73, 88 CERALOCKr V1 V1 C2 C1 H: 1, 2, 21, 22, 24 L: 20, 23, 25, 48 C2 CERALOCKr: CSTCE8M00G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) ST72F561 (HS) (ST Microelectronics) 8-bit Microcomputer Vdd=5.0V L V2 CERALOCKr: CSTCE10M0G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) MC68HC908AZ60AVFU (Freescale) 26 0.1F V2 C1 27 CERALOCKr 8-bit Microcomputer Vdd=5.0V H 60 EVALUATION BOARD IC : MC68HC908AZ60AVFU 59 58 IC : ST72F561 (HS) GND 1 1M CERALOCKr L CERALOCKr V1 V2 C1 2 H: 9, 25, 41, 57, 58 L: 8, 24, 40, 55, 56 V1 V2 C1 CERALOCKr: CSTCE16M0V13C-R0 C1=15pF (Typ.) C2=15pF (Typ.) C2 uPD70F3283YGC (NEC Electronics) C2 M30842MCT-XXXGP (Renesas) 32-bit Microcomputer Vdd=3.3V CERALOCKr: CSTCE8M00G15App-R0 C1=33pF (Typ.) C2=33pF (Typ.) 16-bit Microcomputer Vcc=5.0V 10k H 14 H 19 IC : PD70F3283YGC 12 13 10 4.7F IC : M30842MCT-XXXGP (High*) L 22 V1 V2 C1 6 C2 20 L CERALOCKr CERALOCKr H: 1, 5, 9, 34, 70 L: 2, 8, 11, 15, 33, 69 CERALOCKr: CSTCE10M0G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) H: 23, 24, 37, 39, 59, 74, 91, 118, 122, 132, 142, 143 L: 15, 16, 21, 36, 41, 57, 76, 93, 110~113, 120, 121, 130, 140 *High: XIN-XOUT Drive Capacity Select Bit V1 V2 C1 C2 CERALOCKr: CSTCE8M00G15Cpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) MHz Chip Type -Standard Frequency Tolerance for Automotive2 2.1 max. 3.00.2 0.50.05 0.30.3 6.6 max. 0.45 (Ref.) 0.45 (Ref.) 0.45 (Ref.) t Chip type "CERALOCK" with built-in load capacitors in an extremely small package provides high accuracy. MURATA's frequency adjustment and package technology expertise has enabled the development of the chip "CERALOCK" with built-in load capacitors. Chip "CERALOCK" for automotive has achieved importance in the worldwide automotive market. This diverse series owes its development to MURATA's original mass production techniques and high reliability. 0.450.3 7.20.2 (3) (2) (1) 1.20.2 1.40.2 1.20.2 t : 1.750.05 (2.00--2.99MHz) t : 1.550.05 (3.00MHz--) CSTCC_G_A 2.00-3.99MHz : EIAJ code 1.10.1 2.50.1 Features 1. The series has high reliability and is available for wide temperature range. 2. Oscillation circuits do not require external load capacitors. 3. The series is available in a wide frequency range. 4. The resonators are extremely small and have a low profile. 5. No adjustment is necessary for oscillation circuits. (in mm) 2.50.1 (3) 0.20.2 (2) 0.40.05 (1) 0.4 (ref.) 0.80.1 1.150.05 4.1 max. 0.4 (ref.) 0.4 (ref.) 0.80.1 1.4 max. 2.00.1 0.30.2 4.50.1 : EIAJ Monthly Code 0.80.1 Applications CSTCR_G_B 4.00-7.99MHz 0.40.1 0.40.1 0.750.1 1.50.1 1.50.1 0.40.1 (in mm) 1.1 max. 1.30.15 3.20.15 0.100.10 0.40.1 0.10.1 3.0 max. 0.700.10 1. Cluster panel and Control panel 2. Safety control (Anti-lock Brake System, Electronic Stability Control, Airbag, etc.) 3. Engine ECU, Electronic Power Steering, Immobilizer, etc. 4. Car Air-conditioner, Power Window, Remote Keyless Entry system, etc. 5. Electronic Toll Collection system, Car Navigation, etc. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_G_A 8.00-13.99MHz (in mm) 0.40.1 M (0.5) (3) 3.0 max. (0.5) (2) (0.5) (1) Terminals (1) and (3) are interchangeable. Terminal (2) should be soldered only to fix the resonator onto P.C.B. Terminal (2) should be electrically 0.40.2 0.50.2 0.40.2 floating so it cannot be connected 0.5 0.5 0.5 anywhere. 0.90.1 0.5 (ref.) 0.40.1 0.10.1 0.5 (ref.) 1.30.1 3.10.2 1.1 max. 3.70.2 1.30.15 0.100.10 3.20.15 1.20.1 1.20.1 0.5 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 : EIAJ Monthly CSTCE_V_C 14.00-20.00MHz Code 0.40.1 1.20.1 1.20.1 (in mm) CSACV_X_Q 20.01-70.00MHz Thickness varies with frequency. : EIAJ Monthly Code 1.60.2 1.60.2 1.850.3 (in mm) Continued on the following page. 7 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. M (0.7) (3) 1.30.1 3.10.2 3.70.2 (0.9) (2) (0.7) (1) 0.40.2 0.50.2 0.40.2 0.5 0.5 0.5 2 Thickness varies with frequency and built-in capacitance. *: EIAJ code CSTCV_X_Q 20.01-70.00MHz 1.60.2 1.60.2 1.850.3 (in mm) Oscillating Frequency (MHz) Initial Tolerance Temp. Stability (%) Temperature Range (C) CSTCC_G_A 2.00 to 3.99 0.5% 0.4 [-0.6% to +0.3%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz] -40 to 125 CSTCR_G_B 4.00 to 7.99 0.5% 0.15 -40 to 125 CSTCE_G_A 8.00 to 13.99 0.5% 0.2 -40 to 125 CSTCE_V_C 14.00 to 20.00 0.5% 0.15 -40 to 125 CSACV_X_Q 20.01 to 70.00 0.5% 0.3 -40 to 125 CSTCV_X_Q 20.01 to 70.00 0.5% 0.3 -40 to 125 Part Number Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. Oscillation Frequency Measuring Circuit CSTCC_G_A CSTCE_G_A/CSTCE_V_C/CSTCR_G_B/CSTCV_X_Q VDD VDD 5pF To Frequency counter Rf To Frequency Counter Rf 1M Rd Rd (1) (3) C1 (1) C1 C2 (2) VDD 0.01F To Frequency Counter Rf CL1 8 C2 (2) CSACV_X_Q 22F + (3) CL2 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Standard Land Pattern Dimensions CSTCC_G_A CSTCR_G_B 0.8 1.4 1.2 0.8 0.7 0.8 1.2 1.6 1.2 2 3.8~4.4 2.6 1.2 0.7 0.4 0.4 1.5 2.5 0.4 1.5 2.5 Land Pattern Land Pattern (in mm) (in mm) CSTCE_G_A 0.4 0.8 0.4 0.4 0.8 0.4 0.8 0.4 1.90 ~ 2.10 0.8 1.90 ~ 2.10 0.4 CSTCE_V_C 1.2 1.2 1.2 Land Pattern 1.2 Land Pattern (in mm) (in mm) CSTCV_X_Q 0.5 1.1 0.5 0.5 1.1 0.5 1.1 0.5 1.0 0.5 1.0 0.5 3.10.2 3.10.2 1.0 0.5 1.1 1.0 0.5 0.5 CSACV_X_Q 1.6 1.6 1.6 Land Pattern (in mm) 1.6 Land Pattern (in mm) 9 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oscillation Frequency Temperature Stability CSTCC_G_A CSTCR_G_B +0.2 Oscillating Frequency Shift (%) +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +0.1 0 -0.1 -0.2 -60 +140 -40 -20 0 Temperature (C) Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +80 +100 +120 +140 0 -0.1 -40 -20 0 +20 +40 +60 +80 +100 +120 +80 +100 +120 +140 +80 +100 +120 +140 +0.1 0 -0.1 -0.2 -60 +140 -40 -20 0 Temperature (C) +20 +40 +60 Temperature (C) CSTCV_X_Q CSACV_X_Q +0.2 Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -40 -20 0 +20 +40 +60 Temperature (C) 10 +60 +0.2 +0.1 -0.2 -60 +40 CSTCE_V_C +0.2 -0.2 -60 +20 Temperature (C) CSTCE_G_A Oscillating Frequency Shift (%) 2 Oscillating Frequency Shift (%) +0.2 +80 +100 +120 +140 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Application Circuits Utilization uPD78F9222MC-5A4 (NEC Electronics) M30260F8AGP (Renesas) 8-bit Microcomputer Vdd=5.0V V'dd=7.0V 16-bit Microcomputer Vcc=5.0V 2 10k H 6 H 7 IC : PD78F9222MC-5A4 2 3 8 IC : M30260F8AGP (High*) L 23 CERALOCKr V1 H: 5, 20 L: 1 V2 C1 24 L H: 11, 46, 47, 48 L: 4, 9, 44 CERALOCKr C2 *High: XIN-XOUT Drive Capacity Select Bit V1 V2 C1 CERALOCKr: CSTCR6M00G55B-R0 C1=39pF (Typ.) C2=39pF (Typ.) MB90F347D (Fujitsu) C2 CERALOCKr: CSTCE10M0G55A-R0 C1=33pF (Typ.) C2=33pF (Typ.) MC68HC908AZ60AVFU (Freescale) 16-bit Microcomputer Vcc=5.0V 8-bit Microcomputer Vdd=5.0V H EVALUATION BOARD IC : MC68HC908AZ60AVFU IC : MB90F347D 93 92 L 59 CERALOCKr H: 15, 32, 65, 90 L: 16, 35, 44, 66, 91 V1 V2 C1 58 V1 C2 V2 CERALOCKr: CSTCE8M00G55A-R0 C1=33pF (Typ.) C2=33pF (Typ.) ST72F324J6T3 (MS) (ST Microelectronics) C1 8-bit Microcomputer 8-bit Microcomputer Vdd=5.0V H H IC : PIC12F675-I/P(HS) IC : ST72F324J6T3 (MS) 41 2 L H: 13, 21, 32, 43 L: 14, 22, 33, 39, 40 V2 C1 C2 3 V1 CERALOCKr: CSTCR4M00G55B-R0 C1=39pF (Typ.) C2=39pF (Typ.) L 1M CERALOCKr CERALOCKr V1 CERALOCKr: CSTCE16M0V53C-R0 C1=15pF (Typ.) C2=15pF (Typ.) C2 PIC12F675-I/P (HS) (Microchip) Vdd=5.0V 42 GND 1M CERALOCKr H: 1 L: 4, 8 V2 C1 C2 CERALOCKr: CSTCE8M00G52A-R0 C1=10pF (Typ.) C2=10pF (Typ.) 11 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Notice (Soldering and Mounting) for Automotive CSTCC/CSTCR/CSTCE_V/CSTCE_G/CSTCV/CSACV Series (2) Soldering Iron Components shall be measured after soldering on PCB at +3505C for 3.00.5 seconds and leaving in natural condition for 24 hours. The soldering iron shall not touch the components while soldering. Peak (260C max.) Temperature (C) 2 1. Soldering Conditions (1) Reflow One heat stress, shown in the profile at right, is applied to resonator; then, after being placed in natural conditions for 1 hour, the resonator is measured. (a) Pre-heating conditions should be +150 to +180C for 60 to 120 seconds. Ascending time up to +150C should be longer than 30 seconds. (b) Heating conditions should be within 40 seconds at +230C min., but peak temperature should be Iower than +260C. 230 Heating (230C) 180 150 Pre-heating (150-180C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. 2. Wash (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dT<=60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by air blow at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 3. Notice for Mounting (a) The component is recommended for use with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure to evaluate by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 12 (b) Please insure the component is thoroughly evaluated in your application circuit. (c) Please do not apply excess mechanical stress to the component and terminals during soldering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Notice for Automotive Notice (Storage and Operating Conditions) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in the solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in a place where direct sunlight comes in, in place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm that stable electrical characteristics are maintained. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. 2 Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 13 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Packaging for Automotive Minimum Quantity Part Number 2 Plastic Tape o180mm Plastic Tape o330mm Bulk Dimensions CSTCC_G_A 2,000 6,000 500 a CSTCR_G_B 3,000 9,000 500 a CSTCR_G15C 3,000 9,000 500 a CSTCE_G_A 3,000 9,000 500 b CSTCE_G15C 3,000 9,000 500 b CSTCE_V_C 3,000 9,000 500 b CSTCE_V13C 3,000 9,000 500 b CSTCV_X_Q 2,000 6,000 500 a CSACV_X_Q 2,000 6,000 500 a (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. c Dimensions of Reel a b Trailer 160-190 Leader 13.0 Empty 160 min. Empty Components 400-560 (o180 0-1.5 ) (o180 0-1.5 ) Empty Components Leader Cover Film Trailer 160-190 Cover Film o13.00.2 2.00.5 +1.0 0 9.0 17.01.0 Empty 160 min. 400-560 o13.00.2 2.00.5 +1.0 0 13.01.0 (in mm) Dimensions of Taping Direction of Feed (in mm) 8.00.2 1.750.1 Direction of Feed (1.30 max.) 3 max. 0.900.10 o1.0 -0.0 1.500.1 Cover Film 10 3.50.05 +0.2 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 0.250.05 (1.85 max.) 1.250.05 3 max. 3.400.1 (5.2) (3) (2) (1) 2.00.05 12.00.2 4.70.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 o1.5 +0.1 -0.0 4.00.1 4.00.1 0.30.05 (9.5) (3) (2) (1) W0.1 o1.5Y0 2.20.1 5.50.05 W0.1 o1.5 Y0 2.00.05 4.00.1 CSTCE_G15C 1.750.1 CSTCR_G15C 4.00.1 (in mm) Continued on the following page. 14 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Packaging for Automotive Continued from the preceding page. Dimensions of Taping CSTCC_G_A 5.50.05 (2.45 max.) 1.850.05 1.750.1 8.00.2 3.50.05 3.400.1 (3) (2) (1) (5.2) 3 max. Cover Film 10 (in mm) (1.30 max.) 0.250.05 12.00.2 (1.85 max.) 1.250.05 0.30.05 3 max. +0.2 o1.0 -0.0 1.500.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 0.900.10 1.750.1 5.50.05 4.70.1 (3) (2) (1) (in mm) Direction of Feed CSTCV_X_Q Direction of Feed (1.40 max.) 1.100.05 3 max. 0.250.05 1.500.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 (in mm) 5.50.1 Cover Film 1, 2 : W0.3 o1.5 Y0.0 3 max. 10 12.00.2 4.10.1 4.00.1 W0.1 3.35 Y0.05 t2 2 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. +0.1 -0.0 W0.1 o1.5 Y0.0 (3)(2)(1) (9.5) 8.00.2 2.00.1 t1 1 1.750.1 3.450.1 (3) (2) (1) 3.50.05 +0.1 o1.5 -0.0 4.00.1 1.750.1 CSTCE_V_C Dimensions of Carrier Tape 4.00.1 0.30.1 (9.5) 2.00.05 Direction of Feed (5.2) o1.5 +0.1 -0.0 4.00.1 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 o1.0 (in mm) CSTCE_G_A W0.1 o1.5Y0 2.20.1 4.00.1 3max. Direction of Feed (in mm) W0.1 o1.5 Y0 2.00.05 0.30.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover film 10 CSTCR_G_B 4.00.1 7.60.1 (3) (2) (1) (9.5) 3.50.05 8.00.2 (1.40 max.) 3 max. 1.100.05 3.30.1 Direction of Feed 2.00.05 2 o1.5+0.3 -0.0 4.00.1 1.500.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 4.00.1 o1.550.05 2.00.05 +0.1 -0.0 0.250.05 o1.0 3.450.1 (3) (2) (1) (5.2) 4.00.1 4.00.1 12.00.2 1.750.1 +0.1 o1.5 -0.0 2.00.05 1.750.1 CSTCE_V13C Dimensions of Carrier Tape 4.00.1 Direction of Feed Dimensions vary with product thickness of CERALOCKr Thickness of CERALOCKr t1 1 t2 2 1.50-1.40 1.650.1 2.0 max. 1.30-1.20 1.450.1 1.8 max. (in mm) 1.10-1.00 1.20.1 1.5 max. 4.10.1 (3)(2)(1) 3 max. 10 1, 2 : t2 2 Cover Film W0.3 o1.5 Y0.0 0.30.1 4.00.1 W0.1 3.35 Y0.05 t1 1 (9.5) The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 12.00.2 W0.1 o1.5 Y0.0 5.50.1 2.00.1 1.750.1 CSACV_X_Q 4.00.1 Direction of Feed Dimensions vary with product thickness of CERALOCKr Thickness of CERALOCKr t1 1 t2 2 1.50-1.40 1.650.1 2.0 max. 1.30-1.20 1.450.1 1.8 max. (in mm) 1.10-1.00 1.20.1 1.5 max. 15 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) MHz Chip Type -Tight Frequency Tolerance for General Usage- 2.00.1 0.30.2 (3) 0.20.2 (2) 0.40.05 (1) 0.4 (ref.) 0.4 (ref.) 0.80.1 1. High accuracy resonator realizes initial tolerance of +-250ppm. 2. Oscillation circuits do not require external load capacitors. 3. The series is available in a wide frequency range. 4. The resonators are extremely small and have a low profile. 5. No adjustment is necessary for oscillation circuits. 1.150.05 4.1 max. CSTCR_G15L 4.00-7.99MHz Features 0.4 (ref.) 0.80.1 : EIAJ Monthly Code 0.80.1 0.40.1 0.40.1 0.750.1 1.50.1 1.50.1 0.40.1 (in mm) 1.1 max. 1.30.15 0.100.10 3.20.15 0.40.1 0.10.1 0.700.10 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) Applications (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_G15L 8.00-13.99MHz (in mm) 0.40.1 1.20.1 1.20.1 1.1 max. 1.30.15 3.20.15 0.100.10 1. Clock oscillators for USB (High-speed and Full-speed) controller ICs 2. Storage devices with SATA interface (HDD, Optical storage device, etc.) 3. Audio equipment and musical instrument, etc. 4. Other applications for replacement from Crystal Oscillators 0.40.1 0.10.1 0.90.1 3.0 max. 0.5 (ref.) 0.5 (ref.) 0.5 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 : EIAJ Monthly CSTCE_V13L 14.00-20.00MHz Code 0.40.1 1.20.1 1.20.1 3.20.15 * 0.40.1 0.05 +0.10 - 0.05 1.000.10 0.10.1 3.0 max. (0.5) (3) (0.5) (2) (0.5) (1) 0.05 +0.10 - 0.05 0.50 (ref.) +0.3 +0.3 0.4 +0.3 - 0.2 0.4 - 0.2 0.4 - 0.2 0.5T0.2 0.5T0.2 0.5T0.2 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_XK, CSTCE_XT 24.00-27.20/30.00MHz CSTCW_X11 20.01-29.99MHz (in mm) 0.40.1 1.4 max. 2.0T0.2 1.1 max. 0.50 (ref.) (in mm) 2.5T0.2 1.30.15 0.100.10 3 Chip type "CERALOCK" with built-in load capacitors in an extremely small package provides high accuracy. MURATA's frequency adjustment and package technology expertise has enabled the development of the chip "CERALOCK" with built-in load capacitors. High-density mounting can be realized because of the small package and the elimination of the need for an external load capacitor. 1.4 max. 4.50.1 1.20.1 1.20.1 Thickness varies with frequency and built-in capacitance. *: EIAJ code 1.0T0.2 1.0T0.2 1.25T0.2 (in mm) Continued on the following page. 16 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. 0.75T0.10 1.60T0.05 2.00T0.05 * (0.45) (0.60) (0.45) (3) (2) (1) 0.3 +0.20 -0.15 0.3 +0.20 -0.15 0.3 +0.20 -0.15 0.43T0.10 0.55T0.10 0.43T0.10 Thickness varies with frequency and built-in capacitance. *: EIAJ code CSTCZ_X12R 30.00-48.00MHz 0.78T0.20 0.78T0.20 1.00T0.20 (in mm) Oscillating Frequency (MHz) Initial Tolerance Temp. Stability (%) Temperature Range (C) CSTCR_G15L 4.00 to 7.99 0.1% 0.08 0 to 70 CSTCE_G15L 8.00 to 13.99 0.1% 0.08 0 to 70 CSTCE_V13L 14.00 to 20.00 0.1% 0.08 0 to 70 CSTCW_X11 20.01 to 29.99 0.1% 0.1 0 to 70 CSTCE_XK 24.00 to 27.20 /30.00 +0.02 /-0.025% 0.015 0 to 70 CSTCE_XT 24.00 to 27.20 /30.00 0.027% 0.015 0 to 70 CSTCZ_X12R 30.00 to 48.00 0.15% 0.05 [0 to 70C:0.03%] -30 to 85 Part Number CSTCE_XK: Available Frequency is 24.00 to 27.20MHz and 30.00MHz. CSTCE_XT: Initial tol. Includes freq. aging. Please contact us in case temp. range exceeds 0 to 70 degrees C. Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. Oscillation Frequency Measuring Circuit CSTCR_G15/CSTCE_G15L/CSTCE_V13L CSTCE_XK, CSTCE_XT VDD VDD 5pF To Frequency Counter Rf To Frequency Counter Rf 1M Rd (1) (3) C1 C2 (2) (1) (3) C1 C2 (2) Continued on the following page. 17 3 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Oscillation Frequency Measuring Circuit CSTCW_X11 CSTCZ_X12R VDD VDD To Frequency counter Rf To Frequency Counter Rf Rd (1) (1) (3) C1 (3) C1 C2 C2 (2) (2) 3 Standard Land Pattern Dimensions CSTCR_G15L 0.4 1.1 0.4 CSTCE_G15L 1.1 0.4 0.8 0.4 0.8 0.4 2.6 1.90 ~ 2.10 0.4 1.2 1.5 1.5 1.2 Land Pattern Land Pattern (in mm) (in mm) CSTCE_V13L 0.4 0.8 0.4 0.4 0.8 0.4 0.8 0.4 1.90 ~ 2.10 0.8 1.90 ~ 2.10 0.4 CSTCE_XK, CSTCE_XT 1.2 1.2 1.2 Land Pattern 1.2 Land Pattern (in mm) (in mm) CSTCW_X11 CSTCZ_X12R 0.3 0.65 0.3 0.65 0.3 0.8 0.3 1.0 1.6 2.0 2.0T0.2 0.8 0.3 0.5 0.5 0.5 0.5 0.5 0.95 1.0 0.95 Land Pattern Land Pattern (in mm) (in mm) 18 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oscillation Frequency Temperature Stability CSTCR_G15L CSTCE_G15L +0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +0.1 0 -0.1 -0.2 -60 +140 -40 -20 0 Temperature (C) +20 +40 +60 +80 +100 +120 +140 Temperature (C) 3 CSTCE_V13L CSTCE_XK, CSTCE_XT +1000 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +500 0 -500 -1000 -60 +140 -40 -20 0 Temperature (C) +60 +80 +100 +120 +140 CSTCZ_X12R +0.2 Oscillating Frequency Shift (%) +0.2 Oscillating Frequency Shift (%) +40 Temperature (C) CSTCW_X11 +0.1 0 -0.1 -0.2 -40 +20 -20 0 +20 +40 Temperature (C) +60 +80 +100 +0.1 0 -0.1 -0.2 -40 -20 0 +20 +40 +60 +80 +100 Temperature (C) 19 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Application Circuits Utilization M66291GP (Renesas) MN102HF74GHL (Panasonic) USB Transceiver Vset=3.3V 16-bit Microcontroller Vdd=3.3V Fout H 82 EVALUATION BOARD IC : M66291GP 14 3 IC : MN102HF74GHL 13 1M CERALOCKr GND 23 V2 C1 24 L CERALOCKr 220 V1 18 V1 C1 CERALOCKr: CSTCR6M00G15ppp-R0 C1=39pF (Typ.) C2=39pF (Typ.) C2 LC87F1964A (Sanyo) H: 1~17, 22, 25, 26~42, 54, 58~60, 66~81, 83~91 L: 19, 20, 43~53, 55~57, 61~65, 82, 92~100 V2 C2 CERALOCKr: CSTCE12M0G15Lpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) TUSB2046B (Texas Insturuments) 8-bit Microcontroller Vdd=5.0V USB 4-port HUB Vcc=3.3V 10k H H H1 IC : TUSB2046B IC : LC87F1964A 6 7 L1 L CERALOCKr V1 V2 C1 30 H: 8, 19, 39 L: 5, 20, 40 H1: 31, 33 L1: 29, 30, 32, 34~36 10k 470 29 V1 ISP1181BDGG (Philips) C1 CERALOCKr: CSTCR6M00G15ppp-R0 C1=39pF (Typ.) C2=39pF (Typ.) C2 uPD720114 (NEC Electronics) USB Controller Vset=3.3V USB2.0 (Hi-speed) HUB Controller Vdd=3.3V H VDD EVALUATION BOARD IC : ISP1181BDGG 48 47 IC : PD720114 GND 10 CERALOCKr V1 C2 11 GND CERALOCKr V2 C1 20 H: 3, 25 L: 7, 28 V2 CERALOCKr: CSTCE12M0G15Lpp-R0 C1=33pF (Typ.) C2=33pF (Typ.) C2 GND 1M CERALOCKr V1 CERALOCKr: CSTCR6M00G15ppp-R0 C1=39pF (Typ.) C2=39pF (Typ.) V2 C1 C2 CERALOCKr: CSTCE30M0XK1ppp-R0 C1=5pF (Typ.) C2=5pF (Typ.) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) MHz Chip Type -Standard Frequency Tolerance for General Usage- 3.00.2 0.450.3 Chip type "CERALOCK" with built-in load capacitors provides extremely small package. MURATA's package technology expertise has enabled the development of the Chip "CERALOCK" with built-in load capacitors. High-density mounting can be realized because of the small package and the elimination of the need for an external load capacitor. 2.1 max. 7.20.2 0.50.05 0.30.3 6.6 max. 0.45 (Ref.) 0.45 (Ref.) t 0.45 (Ref.) (3) (2) (1) 1.20.2 1.40.2 1.20.2 t : 1.750.05 (2.00--2.99MHz) t : 1.550.05 (3.00MHz--) CSTCC_G 2.00-3.99MHz Features : EIAJ code 1.10.1 2.50.1 1. Oscillation circuits do not require external load capacitors. 2. The series is available in a wide frequency range. 3. The resonators are extremely small and have a low profile. 4. No adjustment is necessary for oscillation circuits. (in mm) 2.50.1 (3) 0.20.2 (2) 0.40.05 (1) 1.150.05 4.1 max. Applications 0.4 (ref.) 0.4 (ref.) 0.80.1 CSTCR_G 4.00-7.99MHz 0.4 (ref.) 0.80.1 : EIAJ Monthly Code 0.80.1 0.40.1 0.40.1 0.750.1 1.50.1 1.50.1 0.40.1 (in mm) 1.1 max. 1.30.15 3.20.15 0.100.10 0.40.1 0.10.1 3.0 max. 0.700.10 1. Clock oscillators for microprocessors 2. Small electronic equipment such as hand held phone, digital video camcorder (DVC), digital still camera (DSC), portable audio player, etc. 3. Storage media and memory (HDD, Optical storage device, FDD, Flash memory card, etc.) 4. Office automation equipment (Mobile PC, Mouse, Keyboard, etc.) 5. Audio-visual applications (TV, DVD-HDD recorder, Audio equipment, Remote controller, etc.) 6. Home appliances (Air conditioner, Microwave oven, Refrigerator, Washing machine, etc.) 4 1.4 max. 2.00.1 0.30.2 4.50.1 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTCE_G 8.00-13.99MHz (in mm) 0.40.1 1.20.1 1.20.1 3.20.15 0.40.1 0.10.1 1.85 max. 0.62 (ref.) 0.45 (ref.) (3) (2) 0.850.1 0.90.1 0.62 (ref.) 0.40.1 0.0750.075 3.0 max. 1.1 max. 1.30.15 0.100.10 1.1 max. 0.100.10 1.30.15 2.00.15 0.52 (ref.) (1) (3) 0.60.10.40.1 0.60.1 0.50.1 CSTCE_V 14.00-20.00MHz 0.650.1 0.950.1 0.950.1 (in mm) CSTCG_V 20.00-33.86MHz (Ultra Small) 0.30.1 0.41 (ref.) 0.52 (ref.) (2) (1) 0.30.1 0.70.1 0.50.1 0.70.1 (in mm) Continued on the following page. 21 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1.2 max. (0.5) * (0.5) +0.10 0.05 +0.10 - 0.05 0.05 - 0.05 0.05 - 0.05 0.4 +0.3 - 0.2 0.4 0.5T0.2 +0.3 - 0.2 1.0T0.2 1.0T0.2 1.25T0.2 (0.5) (2) (0.5) (1) 0.05 +0.10 - 0.05 Thickness varies with frequency and built-in capacitance. *: EIAJ code 1.0T0.2 1.0T0.2 1.25T0.2 (in mm) 2.0T0.2 0.65 max. * (0.5) (0.5) (0.5) (3) (2) (1) +0.10 CSTCW_X 20.01-70.00MHz (in mm) 2.5T0.2 0.05-0.05 (0.5) (3) +0.3 +0.3 0.4 +0.3 - 0.2 0.4 - 0.2 0.4 - 0.2 0.5T0.2 0.5T0.2 0.5T0.2 0.5T0.2 Thickness varies with frequency. *: EIAJ code CSACW_X 20.01-70.00MHz 1.4 max. 2.0T0.2 * +0.10 2.5T0.2 2.0T0.2 2.5T0.2 +0.10 0.05 -0.05 +0.3 +0.3 0.4 +0.3 -0.2 0.4 -0.2 0.4 -0.2 4 0.5T0.2 0.5T0.2 0.5T0.2 Thickness varies with frequency and built-in capacitance. ex.) 48.00MHz: 0.440.03mm *: EIAJ code CSTCW_X_M 25.00-48.00MHz (Urtra Thin) 1.0T0.2 1.0T0.2 1.25T0.2 (in mm) Oscillating Frequency (MHz) Initial Tolerance Temp. Stability (%) Temperature Range (C) CSTCC_G 2.00 to 3.99 0.5% 0.3 [0.4%:Built-in Capacitance 47pF type within Freq.2.00 to 3.49MHz] -20 to 80 CSTCR_G 4.00 to 7.99 0.5% 0.2 -20 to 80 CSTCE_G 8.00 to 13.99 0.5% 0.2 -20 to 80 CSTCE_G_Z 8.00 to 13.99 0.5% 0.2 -40 to 125 CSTCE_V 14.00 to 20.00 0.5% 0.3 -20 to 80 CSTCG_V 20.00 to 33.86 0.5% 0.3 -20 to 80 CSACW_X 20.01 to 70.00 0.5% 0.2 -20 to 80 CSTCW_X 20.01 to 70.00 0.5% 0.2 -20 to 80 CSTCW_X_M 25.00 to 48.00 0.5% 0.2 -20 to 80 Part Number Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 22 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oscillation Frequency Measuring Circuit CSTCR_G/CSTCE_G/CSTCE_V/CSTCG_V CSTCC_G/CSTCW_X VDD VDD 5pF To Frequency Counter To Frequency counter Rf Rf 1M Rd (1) Rd (1) (3) C1 C2 (3) C1 C2 (2) (2) CSACW_X CSTCW_X_M VDD VDD 4 To Frequency counter Rf To Frequency Counter Rf Rd (1) CL1 CL2 (3) C1 C2 (2) 23 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Standard Land Pattern Dimensions CSTCC_G CSTCR_G 0.8 1.2 1.4 0.7 0.8 1.2 3.8~4.4 1.6 1.2 2.6 1.2 0.8 0.7 0.4 0.4 1.5 2.5 0.4 1.5 2.5 Land Pattern Land Pattern (in mm) (in mm) CSTCE_G CSTCE_V 0.3 0.4 0.8 0.4 0.8 0.65 0.3 0.65 0.3 0.4 1.6 1.90 ~ 2.10 4 1.2 0.95 1.2 0.95 Land Pattern Land Pattem (in mm) (in mm) CSTCG_V 0.3 0.5 0.3 CSACW_X 0.5 0.3 0.3 0.5 0.8 0.8 0.8 0.3 2.0T0.2 1.6 0.8 0.5 2.0 Land Pattem Land Pattern (in mm) (in mm) CSTCW_X CSTCW_X_M 0.5 0.5 0.5 0.5 0.5 0.8 0.3 0.8 0.3 2.0 2.0T0.2 0.8 0.3 0.8 0.3 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 Land Pattern Land Pattern (in mm) 24 (in mm) PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oscillation Frequency Temperature Stability CSTCC_G CSTCR_G +0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -0.2 -40 -20 0 +20 +40 +60 +80 +0.1 0 -0.1 -0.2 -60 +100 -40 -20 0 Temperature (C) Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +120 +140 0 -0.1 -40 -20 0 +20 +40 +60 +80 +100 +120 0 -0.1 -0.2 -60 +140 4 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 Temperature (C) CSTCG_V CSACW_X +0.2 Oscillating Frequency Shift (%) +0.2 Oscillating Frequency Shift (%) +100 +0.1 Temperature (C) +0.1 0 -0.1 -40 -20 0 +20 +40 +60 +80 +100 +120 +0.1 0 -0.1 -0.2 -40 +140 -20 0 Temperature (C) +20 +40 +60 +80 +100 +60 +80 +100 Temperature (C) CSTCW_X CSTCW_X_M +0.2 Oscillating Frequency Shift (%) +0.2 Oscillating Frequency Shift (%) +80 +0.2 +0.1 +0.1 0 -0.1 -0.2 -40 +60 CSTCE_V +0.2 -0.2 -60 +40 Temperature (C) CSTCE_G -0.2 -60 +20 -20 0 +20 +40 Temperature (C) +60 +80 +100 +0.1 0 -0.1 -0.2 -40 -20 0 +20 +40 Temperature (C) 25 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Application Circuits Utilization uPD78F0533GB (NEC Electronics) M38235G6HP (Renesas) 8-bit Microcomputer Vdd=5.0V 8-bit Microcomputer Vcc=5.0V 10k H 6 H 25 IC : PD78F0533GB 11 10 M38235G6HP 12 0.1F L 28 CERALOCKr V1 H: 15, 16, 47 L: 9, 13, 14, 48 V2 C1 29 C2 V1 C1 C2 Vcc'=2.5V CERALOCKr: CSTLS8M00G53-B0 C1=15pF (Typ.) C2=15pF (Typ.) MN103SFC2D (Panasonic) 32-bit Microcomputer Vcc=1.5V H: 71 L: 30, 73 V2 CERALOCKr: CSTCR4M00G55-R0 C1=39pF (Typ.) C2=39pF (Typ.) TMP19A43FDXBG (Toshiba) 4 L CERALOCKr Vcc''=3.3V 32-bit Microcomputer Vdd=5.0V H EVALUATION BOARD IC : TMP19A43FDXBG A14 A15 IC : MN103SFC2D GND 14 CERALOCKr Xin: A14 Xout: A15 V2 C2 V1 C2 8-bit Microcomputer H H EVALUATION BOARD IC : PIC16F716-I/SO(HS) IC : MB95F128H L 16 C1 C2 H: 3, 28, 51, 79 L: 4, 29, 54, 57 CERALOCKr: CSTCE8M00G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) 15 GND 1M CERALOCKr CERALOCKr V2 CERALOCKr: CSTCR5M00G55Z-R0 C1=39pF (Typ.) C2=39pF (Typ.) 8-bit Microcomputer Vdd=5.0V 55 H: 9, 17, 34 L: 7, 15, 36 Vdd2: 16, 38 PIC16F716-I/SO (Microchip) Vcc=5.0V V1 L V2 C1 CERALOCKr: CSTCE10M0G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) MB95F128H (Fujitsu) 56 Vdd2 10F CERALOCKr V1 C1 13 V1 V2 C1 C2 CERALOCKr: CSTCE12M0G52A-R0 C1=10pF (Typ.) C2=10pF (Typ.) Continued on the following page. 26 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Application Circuits Utilization Continued from the preceding page. HD64F36077GH (Renesas) LC87F5G32A (Sanyo) 16-bit Microcomputer 8-bit Microcomputer Vcc=5.0V Vdd=5.0V 510 47000pF 10k H 26 H' IC : HD64F36077GH 11 10 10k 100pF H 2 IC : LC87F5G32A 6 L 6 7 L' L 0.1F 2.2kF CERALOCKr V1 V2 C1 CERALOCKr H: 3, 7, 12 L: 8, 9 C2 V1 V2 CERALOCKr: CSTCE8M00G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) uPD70F3215HYGC (NEC Electronics) C1 H ATmega128 (Atmel) 8-bit Microcomputer 4 Vcc=5.0V 14 H IC : PD70F3215HYGC 12 13 10 10F IC : ATmega128 L 24 V1 H: 1, 5, 9, 34, 70 L: 2, 8, 11, 33, 69 V2 C1 23 C2 V1 C1 C2 18 32-bit Microcomputer Vdd1=1.8V Vdd2=3.3V H1 H2 IC : ST7FLITE29F2B6 14 IC : TMS320F2810PBKA 58 L 57 V2 C1 C2 L 100 CERALOCKr V1 CERALOCKr: CSTCE8M00G52-R0 C1=10pF (Typ.) C2=10pF (Typ.) TMS320F2810PBKA (Texas Insturumets) 8-bit Microcomputer Vdd=5.0V H: 21, 52, 64 L: 22, 53, 63 V2 CERALOCKr: CSTCR5M00G55-R0 C1=39pF (Typ.) C2=39pF (Typ.) ST7FLITE29F2B6 (ST Microelectronics) 15 L CERALOCKr CERALOCKr H CERALOCKr: CSTLS5M00G53-B0 C1=15pF (Typ.) C2=15pF (Typ.) C2 32-bit Microcomputer Vdd=5.0V H: 8, 19, 39 L: 5, 20, 40 H': 29, 31, 35 L': 30, 32~34, 36 10kF H: 17 L: 16 CERALOCKr: CSTCE16M0V53-R0 C1=15pF (Typ.) C2=15pF (Typ.) CERALOCKr V1 V2 C1 C2 H1: 20, 29, 42, 56, 63, 74, 82, 94, 99, 100, 102, 110, 114 H2: 1, 13, 14, 25, 49, 52, 83, 104, 118 L: 12, 15, 17, 26, 30, 39, 53, 59, 62, 73, 88, 95, 103, 109, 115, 117, 128 CERALOCKr: CSTCE15M0V53-R0 C1=15pF (Typ.) C2=15pF (Typ.) 27 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) MHz Lead Type -Standard Frequency Tolerance for General Usage- 3.50.3 (3) (1) : Weekly Date Code (in mm) 2.50.2 2.50.2 T 1 5.51.0 3.50.3 6.50.5 (3) (2) (1) T 1 : 3.51.0 (16.00--32.99MHz) 3.01.0 (33.00--70.00MHz) CSTLS_X 16.00-70.00MHz 2.50.2 2.50.2 0.480.05 1. Oscillation circuits do not require external load capacitors. There is some variation in built-in capacitance values applicable to various IC (except for CSALS series). 2. The series is stable over a wide temperature range. 3. The resonators are compact, lightweight and exhibit superior shock resistance performance. 4. They enable the design of oscillator circuits requiring no adjustment. 5. The series is inexpensive and available in stable supply. (2) o0.480.05 0.7 (Ref.) 7.0 CSTLS_G 3.40-10.00MHz Features : EIAJ Monthly Code (in mm) Applications 1. DTMF generators 2. Clock oscillators for microcomputers 3. Remote control units 4. Automated office equipment T 1 3.50.3 6.50.5 5.51.0 5.00.3 T 1 : 3.51.0 (16.00--32.99MHz) 3.01.0 (33.00--70.00MHz) CSALS_X 16.00-70.00MHz 0.480.05 5 5.50.5 MURATA's ceramic resonator, "CERALOCK" with built-in load capacitors, has been widely applied as the most suitable component for clock oscillators in a broad range of microprocessors. The CSTLS series can be used in the design of oscillation circuits not requiring external load capacitors, enabling both high-density mounting and cost reduction. 3.01.0 0.7 (Ref.) 8.01.0 : EIAJ Monthly Code (in mm) Oscillating Frequency (MHz) Initial Tolerance Temp. Stability (%) Temperature Range (C) CSTLS_G 3.40 to 10.00 0.5% 0.2 [-0.4% to +0.2%:Built-in Capacitance 47pF type] -20 to 80 CSALS_X 16.00 to 70.00 0.5% 0.2 -20 to 80 CSTLS_X 16.00 to 70.00 0.5% 0.2 -20 to 80 Part Number Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page. 28 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oscillation Frequency Measuring Circuit CSTLS_G/CSTLS_X CSALS_X VDD VDD To Frequency counter Rf To Frequency counter Rf Rd (1) Rd (3) CL1 C1 CL2 C2 (2) Oscillation Frequency Temperature Stability CSTLS_G CSTLS_X W0.50 0.3 0 Y40 0 40 80 120 Temperature (C) Y0.25 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) 0.2 W0.25 0.1 0.0 -50 -0.1 -30 -10 10 30 50 70 90 110 130 Temperature (C) -0.2 5 -0.3 Y0.50 CSALS_X 0.3 Oscillating Frequency Shift (%) 0.2 0.1 0.0 -50 -0.1 -30 -10 10 30 50 70 90 110 130 Temperature (C) -0.2 -0.3 29 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) kHz Chip Type -Standard Frequency Tolerance for General Usage7.50.3 +0.1 0 -0.4 1.10.1 1.00.5 8.50.3 2.00.5 1.0 max. MURATA's original package technologies have enabled the development of the kHz band "CERALOCK". The series is perfect in miniature remote control units and AV modules. "CERALOCK" can be reflow soldered and mounted by automatic placers. 3.30.3 0.150.05 0.90.1 1. The series withstands reflow soldering. 2. The series is mountable by automatic placers. 3. No adjustment is necessary for oscillation circuits. 0.15 max. Features CSBFB_J 430-519kHz : EIAJ code (in mm) 5.00.2 2.30.2 +0.1 0 -0.4 2.00.5 1.0 max. 1. Clock oscillators for microprocessors 2. OA equipment 3. AV modules 6.00.3 5.00.3 1.00.3 Applications 0.80.2 0.150.05 0.15 max. 0.70.2 CSBFB_J 700-1250kHz 0.100.03 : EIAJ code 2.50.2 6 Part Number CSBFB_J (in mm) Oscillating Frequency (kHz) Initial Tolerance Temp. Stability (%) Temperature Range (C) 430 to 519, 700 to 1250 0.5% 0.3 -20 to 80 Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. Oscillation Frequency Measuring Circuit Oscillation Frequency Temperature Stability VDD To Frequency counter Rf Rd CL1 Oscillating Frequency Shift (%) W0.5 0 Y40 0 40 80 120 Temperature (C) CL2 Y0.5 Continued on the following page. 30 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern Dimensions CSBFB_J (700-1250kHz) 1.7 3.0 2.0 0.5 0.5 CSBFB_J (430-519kHz) 1.7 1.5 3.3 1.5 1.0 (in mm) (in mm) 6 31 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Ceramic Resonators (CERALOCKr) kHz Lead Type -Standard Frequency Tolerance for General Usage7.90.3 9.30.3 5.00.2 1. The series is stable over a wide temperature range and with respect to long-term aging. 2. The series comprises fixed, tuned, solid-state devices. 3. The resonators are miniature and lightweight. 4. They exhibit excellent shock resistance performance. 5. Oscillating circuits requiring no adjustment can be designed by utilizing these resonators in conjunction with transistors or appropriate ICs. 9.00.3 3.50.5 1.5 max. 5.00.2 3.50.3 6.00.3 3.5.0.5 1.5 max. 9.00.3 0.80.2 (in mm) 0.10.03 : EIAJ code CSBLA_J 700-1250kHz : EIAJ code 0.150.05 2.50.2 1.10.2 1.750.5 0.60.2 5.00.2 : EIAJ code (in mm) 2.20.2 5.00.3 0.80.1 1.10.1 0.250.1 0.10.03 CSBLA_E 510-699kHz 1.750.5 CSBLA_E 430-509kHz 3.50.5 1.5 max. 0.80.1 1.10.1 0.250.1 0.10.03 1. Square-wave and sine-wave oscillators 2. Clock generator for microprocessors 3. Remote control systems 7 3.50.3 7.00.3 Applications 7.00.3 : EIAJ code (in mm) 1.80.3 CSBLA_E 375-429kHz Features 0.80.1 1.10.1 0.250.1 0.10.03 4.30.5 1.5 max. The CSBLA series ceramic resonators owe their development to MURATA's innovative expert technologies and the application of mass production techniques typically utilized in the manufacture of piezoelectric ceramic components. Because of their high mechanical Q and consistent high quality, the CSBLA series are ideally suited to microprocessor and remote control unit applications. 3.60.3 in mm Oscillating Frequency (kHz) Initial Tolerance Temp. Stability (%) Temperature Range (C) CSBLA_E 375 to 699 - 0.3 -20 to +80 CSBLA_J 700 to 1250 0.5% 0.3 -20 to 80 Part Number Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page. 32 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oscillation Frequency Measuring Circuit Oscillation Frequency Temperature Stability VDD To Frequency counter Rf Rd CL1 Oscillating Frequency Shift (%) W0.5 0 Y40 0 40 80 120 Temperature (C) CL2 Y0.5 7 33 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Notice (Soldering and Mounting) for General Usage CSTCC Series (2) Soldering Iron Components shall be measured after soldering on PCB at +3505C for 3.00.5 seconds and leaving in natural condition for 24 hours. The soldering iron shall not touch the components while soldering. 2. Wash Some series do not withstand washing. Please check the list at right before use. Peak (260C max.) Temperature (C) 1. Soldering Conditions (1) Reflow One heat stress, shown in the profile at right, is applied to resonator; then, after being placed in natural conditions for 1 hour, the resonator is measured. (a) Pre-heating conditions should be +150 to +180C for 60 to 120 seconds. Ascending time up to +150C should be longer than 30 seconds. (b) Heating conditions should be within 40 seconds at +230C min., but peak temperature should be Iower than +260C. 230 Heating (230C) 180 150 Pre-heating (150-180C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. Series Wash CSTCC (Except 2.00 - 3.49MHz) Available CSTCC (Only 2.00 - 3.49MHz) Not Available (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dT<=60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. 7 (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by air blow at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 3. Notice for Mounting (a) The component is recommended for use with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure to evaluate by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. 34 (b) Please insure the component is thoroughly evaluated in your application circuit. (c) Please do not apply excess mechanical stress to the component and terminals during soldering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Notice (Soldering and Mounting) for General Usage CSTCR/CSTCE_V/CSTCG/CSTCE_G/CSTCE_XK Series (2) Soldering Iron Components shall be measured after soldering on PCB at +3505C for 3.00.5 seconds and leaving in natural condition for 24 hours. The soldering iron shall not touch the components while soldering. Peak (260C max.) Temperature (C) 1. Soldering Conditions (1) Reflow One heat stress, shown in the profile at right, is applied to resonator; then, after being placed in natural conditions for 1 hour, the resonator is measured. (a) Pre-heating conditions should be +150 to +180C for 60 to 120 seconds. Ascending time up to +150C should be longer than 30 seconds. (b) Heating conditions should be within 40 seconds at +230C min., but peak temperature should be Iower than +260C. 230 Heating (230C) 180 150 Pre-heating (150-180C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. 2. Wash Please contact us in case you need washable component. 3. Notice for Mounting (a) The component is recommended for use with placement machines which employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure to evaluate by using placement machines before going into mass production. Do not use placement machines which utilize mechanical positioning. Please contact Murata for details beforehand. (b) Please insure the component is thoroughly evaluated in your application circuit. (c) Please do not apply excess mechanical stress to the component and terminals during soldering. 7 35 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Notice (Soldering and Mounting) for General Usage CSTCV/CSACV Series (2) Soldering Iron Components shall be measured after soldering on PCB at +3505C for 3.00.5 seconds and leaving in natural condition for 24 hours. The soldering iron shall not touch the components while soldering. Peak (260C max.) Temperature (C) 1. Soldering Conditions (1) Reflow One heat stress, shown in the profile at right, is applied to resonator; then, after being placed in natural conditions for 1 hour, the resonator is measured. (a) Pre-heating conditions should be +150 to +180C for 60 to 120 seconds. Ascending time up to +150C should be longer than 30 seconds. (b) Heating conditions should be within 40 seconds at +230C min., but peak temperature should be Iower than +260C. 230 Heating (230C) 180 150 Pre-heating (150-180C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. 2. Wash (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dT<=60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) 7 (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by air blow at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 3. Notice for Mounting (a) The component is recommended for use with placement machines which employ optical placement capabilities. In some cases, placement machines which utilize mechanical positioning may apply excessive mechanical force which might result in damage to the ceramic resonator. Please contact Murata before mounting this product using placement machines which use mechanical positioning. 36 (b) Please insure the component is thoroughly evaluated in your application circuit. (c) Please do not apply excess mechanical stress to the component and terminals during soldering. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Notice (Soldering and Mounting) for General Usage CSACW/CSTCW/CSTCZ Series (2) Soldering Iron Components shall be measured after soldering on PCB at +3505C for 3.00.5 seconds and leaving in natural condition for 24 hours. The soldering iron shall not touch the components while soldering. Peak (260C max.) Temperature (C) 1. Soldering Conditions (1) Reflow One heat stress, shown in the profile at right, is applied to resonator; then, after being placed in natural conditions for 1 hour, the resonator is measured. (a) Pre-heating conditions should be +150 to +180C for 60 to 120 seconds. Ascending time up to +150C should be longer than 30 seconds. (b) Heating conditions should be within 40 seconds at +230C min., but peak temperature should be Iower than +260C. 230 Heating (230C) 180 150 Pre-heating (150-180C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. 2. Wash Please contact us in case you need washable component. 3. Notice for Mounting (a) Please insure the component is thoroughly evaluated in your application circuit. (b) Please do not apply excess mechanical stress to the component and terminals during soldering. 7 37 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Notice for General Usage Notice (Storage and Operating Conditions) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in the solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 7 "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 38 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in a place where direct sunlight comes in, in place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Lead Type Notice for General Usage Notice (Soldering and Mounting) 1. Soldering Conditions (1) Reflow The component cannot withstand reflow soldering. (2) Soldering Iron (a) Lead terminals are immersed up to 1.5 mm from components body in soldering bath of +260+-5 degrees C for 10+-1.0 seconds, and then components shall be left in natural condition for 1 hour. (b) Lead terminal is directly contacted with the tip of soldering iron of +350+-5 degrees C for 3.0+-0.5 seconds, and then components shall be left in natural condition for 1 hour. (3) Please do not apply excessive mechanical stress to the component and lead terminals during soldering. 2. Wash The component cannot withstand washing. Notice (Storage and Operating Conditions) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in the solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in a place where direct sunlight comes in, in place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. 7 Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 39 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz Type Notice for General Usage Notice (Soldering and Mounting) CSBFB_J (430-519kHz/700-1250kHz) (2) Soldering Iron Components shall be measured after soldering on PCB at +3505C for 3.00.5 seconds and leaving in natural condition for 24 hours. The soldering iron shall not touch the components while soldering. Peak (260C max.) Temperature (C) 1. Soldering Conditions (1) Reflow One heat stress, shown in the profile at right, is applied to resonator; then, after being placed in natural conditions for 1 hour, the resonator is measured. (a) Pre-heating conditions should be +150 to +180C for 60 to 120 seconds. Ascending time up +150C should be longer than 30 seconds. (b) Heating conditions should be within 40 seconds at +230C min., but peak temperature should be lower than +260C. 230 Heating (230C) 180 150 Pre-heating (150-180C) Gradual Cooling 30 sec. min. 60-120 sec. 40 sec. max. 120 sec. min. 2. Wash (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dT<=60C (dT=Component-solvent) *1 ex. In case the component at +90C immerses into cleaning solvent at +60C, then dT=30C. (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) 7 (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by air blow at +80C max. (5) Others (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 3. Notice for Mounting (a) Please insure the component is thoroughly evaluated in your application circuit. (b) Please do not apply excess mechanical stress to the component and lead terminals during soldering. 40 (c) Ultrasonic cleaning of the component is acceptable. However, the size of bath, size and thickness of PCB should be evaluated to confirm stable electrical characteristics are maintained. (c) In the case of the bulk component, dry heating treatment (130C. for 5 hours min.) is required before reflow soldering. Then, the component should be soldered within 48 hours after dry heating treatment. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz Type Notice for General Usage Notice (Soldering and Mounting) CSBLA_E 1. Soldering Conditions (1) Reflow The component cannot withstand reflow soldering. (2) Soldering Iron (a) Lead terminals are immersed up to 1.5 mm from components body in soldering bath of +260+-5 degrees C for 10+-1.0 seconds, and then components shall be left in natural condition for 1 hour. (b) Lead terminal is directly contacted with the tip of soldering iron of +350+-5 degrees C for 3.0+-0.5 seconds, and then components shall be left in natural condition for 1 hour. (3) Please do not apply excessive mechanical stress to the component and lead terminals during soldering. 2. Wash The component cannot withstand washing. Notice (Soldering and Mounting) CSBLA_J 3. Shower or Rinse Wash (1) Cleaning Solvents 5 minutes max. in above solvent at +60 degrees C. max. HCFC, Isopropanol, Tap water, Demineralized water, (4) Drying Cleanthrough750H, Pine alpha 100S, Techno care 5 minutes max. by air blow at +80 degrees C. max. FRW. (5) Others (2) Temperature Difference: dT *1 1. Total washing time should be within 10 minutes. dT<=30 C. (dT=Component-solvent) 2. Please insure the component is thoroughly *1 ex. In case the component at +90 degrees C. immerses evaluated in your application circuit. into cleaning solvent at +60 degrees C., then 3. The component may be damaged if it is washed dT=30 degrees C. with alkali cleaning solvent. (3) Conditions 4. Please do not apply excess mechanical stress to 1. Ultrasonic Wash the component and lead terminals during soldering. 1 minute max. in above solvent at +60 degrees C. max. 5. Ultrasonic cleaning of the component is acceptable. (Frequency: 28kHz, Output: 20W/L) However, the size of bath, size and thickness of 2. Immersion Wash PBC should be evaluated to confirm stable electrical 5 minutes max. in above solvent at +60 degrees C. max. characteristics are maintained. Notice (Storage and Operating Condition) CSBFB_J/CSBLA_J 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in the solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in a place where direct sunlight comes in, in place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 7 Continued on the following page. 41 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz Type Notice for General Usage Continued from the preceding page. 4. Others Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm that stable electrical characteristics are maintained. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. Notice (Storage and Operating Condition) CSBLA_E 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expire date (Shelf life) of the products is six months after delivery under the conditions of a sealed and an unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in the solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere. 7 Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 42 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places such as: in a damp heated place, in a place where direct sunlight comes in, in place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under the poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Others Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Packaging for General Usage Minimum Quantity Part Number Plastic Tape o180mm Plastic Tape o330mm Bulk Dimensions CSTCC_G 2,000 6,000 500 a CSTCR_G 3,000 9,000 500 a CSTCR_G15L 3,000 9,000 500 a CSTCE_G 3,000 9,000 500 b CSTCE_G15L 3,000 9,000 500 b CSTCE_V 3,000 9,000 500 b CSTCE_V13L 3,000 9,000 500 b CSTCE_XK 3,000 9,000 500 b CSTCE_XT 3,000 9,000 500 b CSTCG_V 3,000 9,000 500 b CSTCZ_X12R 3,000 9,000 500 b CSTCW_X 3,000 9,000 500 b CSTCW_X11 3,000 9,000 500 b CSTCW_X_M 3,000 9,000 500 b CSACW_X 3,000 9,000 500 b (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. c Dimensions of Reel a b Trailer 160-190 Leader Components Empty 160 min. Empty Components 400-560 o13.00.2 (o180 0-1.5 ) (o180 0-1.5 ) Empty Leader Cover Film Trailer 160-190 Cover Film 2.00.5 +1.0 Empty 160 min. 400-560 o13.00.2 2.00.5 +1.0 13.0 0 9.0 -0 17.01.0 13.01.0 (in mm) Dimensions of Taping Direction of Feed (in mm) 8.00.2 1.750.1 3 max. Direction of Feed (1.30 max.) o1.0 -0.0 1.500.1 Cover Film 10 3.50.05 3.400.1 (3) (2) (1) (5.2) +0.2 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 0.900.10 3 max. (1.85 max.) 4.00.1 0.30.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 2.00.05 0.250.05 W0.1 o1.5Y0 2.20.1 o1.5 +0.1 -0.0 4.00.1 12.00.2 4.70.1 (3) (2) (1) (9.5) 4.00.1 5.50.05 W0.1 o1.5 Y0 2.00.05 1.250.05 4.00.1 7 CSTCE_G15L 1.750.1 CSTCR_G15 (in mm) Continued on the following page. 43 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Packaging for General Usage Continued from the preceding page. Dimensions of Taping Direction of Feed Direction of Feed (in mm) 1.750.1 3.50.1 +0.2 1.6 max. 3 max. 1.100.1 o1.0 -0.0 10 (in mm) 8.00.2 2.20.1 (3) (2) (1) 8.00.2 (5.5) 1.80.1 Cover Film Direction of Feed o1.5 -0.0 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. t2 2 10 t1 1 3 max. +0.1 2.00.1 0.20.1 1.750.1 4.00.1 +0.2 o1.0-0.0 0.20.1 +0.1 2.3-0.05 3.50.1 2.80.1 (3) (2) (1) (5.5) 8.00.2 10 CSTCZ-X12R 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 3 max. (in mm) +0.1 o1.5-0.0 2.00.1 o1.0 -0.0 1.500.1 Cover Film CSTCW_X11 4.00.1 3.50.05 +0.2 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 0.250.05 (1.40 max.) 3 max. 1.100.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 1.500.1 3.400.1 (3) (2) (1) (5.2) 8.00.2 3.50.05 4.00.1 +0.1 -0.0 0.250.05 o1.0 3.450.1 (3) (2) (1) (5.2) 4.00.1 o1.5 +0.1 -0.0 2.00.05 (1.50 max.) 1.750.1 +0.1 o1.5 -0.0 2.00.05 1.750.1 CSTCE_XK, CSTCE_XT 4.00.1 1.150.1 CSTCE_V13L Dimensions of Carrier Tape 4.00.1 1, 2 : Dimensions vary with product thickness of CERALOCKr 1.15-1.00 1.300.1 1.9 max. 0.95-0.90 1.120.1 1.7 max. Direction of Feed 4.00.1 3.30.1 Direction of Feed 12.00.2 1.750.1 7.60.1 (9.5) 12.00.2 o1.5+0.3 -0.0 +0.3 1.5 -0.0 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover film 10 (in mm) 3max. Direction of Feed (2.25 max.) (2.45 max.) 3max. 1.850.05 3.30.1 0.30.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover film 10 1.550.05 2.00.05 5.50.05 4.00.1 1.650.05 4.00.1 7.60.1 (3) (2) (1) (9.5) 7 5.50.05 o1.550.05 2.00.05 (in mm) CSTCC_G more than 3.00MHz 1.750.1 CSTCC_G less than 3.00MHz 4.00.1 0.30.05 1.40-1.20 1.480.1 2.1 max. (3) (2) (1) Thickness of CERALOCKr t1 1 t2 2 (in mm) Continued on the following page. 44 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Chip Type Packaging for General Usage Continued from the preceding page. Dimensions of Taping Direction of Feed (in mm) 3 max. 8.00.2 Direction of Feed (in mm) 1.15-1.00 1.300.1 1.9 max. 3.50.1 2.80.1 8.00.2 7 t2 2 t1 1 3 max. (in mm) Direction of Feed 1, 2 : Dimensions vary with product thickness of CERALOCKr 1, 2 : Dimensions vary with product thickness of CERALOCKr 1.40-1.20 1.480.1 2.1 max. +0.1 2.3-0.05 10 (in mm) Direction of Feed +0.2 o1.0-0.0 4.00.1 0.20.1 10 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film t2 2 0.30.1 +0.1 2.3 -0.05 3 max. t1 1 +0.2 o1.0-0.0 4.00.1 +0.1 o1.5-0.0 2.00.1 (3) (2) (1) (5.5) 8.00.2 (5.5) 2.80.1 3.50.1 +0.1 o1.5 -0.0 2.00.1 4.00.1 1.750.1 CSTCW_X 1.750.1 CSACW_X 8.00.2 3.50.05 +0.1 -0.0 (1.30 max.) o1.0 1.500.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 1.000.05 (1.40 max.) 1.100.05 3 max. 0.250.05 4.00.1 2.20.05 (3) (2) (1) (5.2) 8.00.2 +0.1 -0.0 1.500.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 1.750.1 +0.1 o1.5 -0.0 2.00.05 0.250.05 1.750.1 Dimensions of Carrier Tape 4.00.1 3.50.05 3.450.1 (5.2) (3) (2) (1) 2.00.05 Thickness of CERALOCKr t1 1 t2 2 3.50.05 CSTCG_V +0.1 o1.5 -0.0 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film (in mm) Direction of Feed CSTCE_V 4.00.1 (1.30 max.) 10 (in mm) Dimensions of Carrier Tape 4.00.1 o1.0 3 max. Cover Film Direction of Feed 4.00.1 3.400.1 (3) (2) (1) (5.2) +0.2 o1.0 -0.0 1.500.1 0.900.10 1.250.05 3 max. 0.30.05 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 10 (1.85 max.) 4.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 0.250.05 W0.1 o1.5Y0 2.20.1 4.00.1 o1.5 +0.1 -0.0 2.00.05 12.00.2 4.70.1 (9.5) (3) (2) (1) 2.00.05 4.00.1 5.50.05 W0.1 o1.5 Y0 1.750.1 CSTCE_G 1.750.1 CSTCR_G 4.00.1 Thickness of CERALOCKr t1 1 t2 2 0.95-0.90 1.120.1 1.7 max. 1.40-1.20 1.480.1 2.1 max. 1.15-1.00 1.300.1 1.9 max. 0.95-0.90 1.120.1 1.7 max. 3 max. t2 2 10 o1.0 -0.0 t1 1 2.30.1 8.00.2 2.80.1 +0.2 4.00.1 0.20.1 (5.5) The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. Cover Film 3.50.1 +0.1 o1.5 -0.0 (3) (2) (1) 2.00.1 1.750.1 CSTCW_X_M 4.00.1 Direction of Feed 1, 2 : Dimensions vary with product thickness of CERALOCKr Thickness of CERALOCKr t1 1 t2 2 1.40-1.20 1.480.1 2.1 max. 1.15-1.00 1.300.1 1.9 max. (in mm) 0.95-0.70 1.120.1 1.7 max. 45 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Lead Type Packaging for General Usage Minimum Quantity Part Number Ammo Pack Bulk CSTLS_G (3.40 to 10.0MHz) 2,000 500 CSTLS_X (16.00 to 70.00MHz) 2,000 500 (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. Tape Dimensions of CSTLS_G P2 P dh dh dS D M A W2 d W0 W1 W L1 H0 H1 M D0 P1 F1 F2 P0 Item 7 t Direction of Feed Code Dimensions Tolerance D 8.0 Height of resonator A 5.5 0.5 Dimensions of terminal d o0.48 0.05 Lead length under the hold down tape L1 5.0 min. Pitch of component P 12.7 0.5 Pitch of sprocket hole P0 12.7 0.2 Length from sprocket hole center to lead P1 3.85 0.5 Length from sprocket hole center to component center P2 6.35 0.5 Lead spacing (I) F1 2.5 0.2 Lead spacing (II) F2 2.5 0.2 Slant forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 Gap of hold down tape and carrier tape W2 0 0.5 W0.5 Y0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Total height of resonator H1 23.5 1.0 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 0 1.0 Total tape thickness Body tilt t dS Remarks 1.0 Width of diameter - - Tolerance for Pitches 10xP0=1271 1mm max. Hold down tape does not exceed the carrier tape. (in mm) Continued on the following page. 46 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Lead Type Packaging for General Usage Continued from the preceding page. Tape Dimensions of CSTLS_X P2 P dS H1 H0 W1 W L1 d W0 W2 A D dh dh D0 P1 F1 F2 Direction of Feed P0 Item Code Dimensions t Tolerance D 5.5 Height of resonator A 6.5 0.5 Dimensions of terminal d o0.48 0.05 Lead length under the hold down tape L1 5.0 min. Pitch of component P 12.7 0.5 Pitch of sprocket hole P0 12.7 0.2 Length from sprocket hole center to lead P1 3.85 0.5 Length from sprocket hole center to component center P2 6.35 0.5 Lead spacing (I) F1 2.5 0.2 Lead spacing (II) F2 2.5 0.2 Slant forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 0.5 Gap of hold down tape and carrier tape W2 0 W0.5 Y0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Total height of resonator H1 24.5 1.0 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 0 1.0 Total tape thickness Body tilt t dS Remarks 1.0 Width of diameter - - Tolerance for Pitches 10xP0=1271 1mm max. Hold down tape does not exceed the carrier tape. 7 (in mm) 47 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MHz Lead Type Packaging for General Usage Minimum Quantity Part Number CSALS_X (16.00 to 70.00MHz) Ammo Pack Bulk 2,000 500 (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. Tape Dimensions of CSALS P P2 dh dh dS H0 W1 W L1 W0 d H1 W2 A D D0 P1 F P0 Item 7 Code Dimensions Tolerance D 5.5 Height of resonator A 6.5 0.5 Dimensions of terminal d o0.48 0.05 Lead length under the hold down tape L1 5.0 min. ------ Pitch of component P 12.7 0.5 Pitch of sprocket hole P0 12.7 0.2 Length from sprocket hole center to lead P1 3.85 0.5 Length from sprocket hole center to component center P2 6.35 0.5 Lead spacing F 5.0 0.3 Slant forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. ------ Position of sprocket hole W1 9.0 Gap of hold down tape and carrier tape W2 0 0.5 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Total height of resonator H1 24.5 1.0 Diameter of sprocket hole D0 o4.0 0.2 0.6 0.2 0 1.0 Body tilt t dS Remarks 1.0 Width of diameter Total tape thickness t Direction of Feed Tolerance for Pitches 10xP0=1271 1mm max. Hold down tape does not exceed the carrier tape. (in mm) 48 PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it's specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our * Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note * This !Note P16E.pdf 08.3.3 sales representatives or product engineers before ordering. * This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. kHz Type Packaging for General Usage CSBFB Series Minimum Quantity Part Number Plastic Tape o330mm Bulk CSBFB_J (430 to 519kHz) 1,500 500 CSBFB_J (700 to 1250kHz) 3,000 1,000 (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. (o801.0) 2.00.5 o13.00.2 (o3302.0) c Dimensions of Reel 17.50.5 21.51.0 (in mm) Dimensions of Taping The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. 8.00.1 5.450.1 3 max. t0.3 (4.6max.) Cover Film 10 3.50.1 t0.3 8.050.1 3 max. Cover Film 10 Direction of Feed 16.00.15 8.80.1 13.30.1 16.00.3 11.40.1 12.00.1 The cover film peel strength force 0.1 to 0.7N The cover film peel speed 300mm/min. o1.50.1 Direction of Feed (in mm) (3.07max.) 2.00.1 7.50.1 1.750.1 4.00.1 7.50.1 o1.50.1 13.30.1 2.00.1 1.750.15 CSBFB_J 700-1250kHz 2.70.1 CSBFB_J 430-519kHz 4.00.1 (in mm) 7 CSBLA Series Minimum Quantity Part Number Magazine Bulk CSBLA_E 50 500 CSBLA_J 100 1,000 The order quantity should be an integral multiple of the "Minimum Quantity" shown above. (pcs.) 49 !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf 08.3.3