856654.0 - TriQuint Semiconductor

856654

1747.5 MHz SAW Filter

Data Sheet: Rev E 8/25/11

- 1 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Applications

General purpose wireless

Wireless infrastructure

3G, 4G, Multistandard

Repeaters

Product Features

Functional Block Diagram

Top view

Usable bandwidth 75 MHz

Single-ended operation

Ceramic Surface Mount Package (SMP)

Matching required for operation at 50Ω

Small Size: 3.00 x 3.00 x 1.22 mm

Hermetically sealed

RoHS compliant, Pb-free

4

2

3

16

5

Input Output

Gnd

Gnd Gnd

Gnd

General Description

Pin Configuration

856654 is a general purpose Uplink filter for band 3. This

filter was specifically designed in a 3x3mm hermetic

package for base station applications and is part of our wide

portfolio of RF filters in the same package.

Low insertion loss, coupled with high attenuation, makes

this filter a natural choice for our customers Uplink RF

filtering needs.

Pin # SE

Description

2

Input

5

Output

1,3,4,6

Case Ground

Ordering Information

Part No.

Description

856654

packaged part

856654-EVB

evaluation board

Standard T/R size = 5000 units/reel.

856654

1747.5 MHz SAW Filter

Data Sheet: Rev E 8/25/11

- 2 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Specifications

Electrical Specifications (1)

Specified Temperature Range: (2) -30 to +85 ºC

Parameter (3)

Conditions

Min

Typical (4)

Max

Units

Center Frequency

-

1747.5

-

MHz

Maximum Insertion Loss

1710 – 1785 MHz

-

2.2

2.8

dB

Amplitude Ripple

1710 – 1785 MHz

-

1.6

dB p-p

Absolute Attenuation (5)

180 – 220 MHz

1197 – 1452 MHz

1606 – 1676 MHz

2100 – 2157 MHz

2680 – 3005 MHz

3197 – 6000 MHz

38

50

5.5

20

15

6

46

54

7

26

22

9

-

dB

Input/output Return Loss

1710 – 1785 MHz

10

13

-

dB

Source Impedance (single-ended) (6)

-

50

-

Load Impedance (single-ended) (6)

-

50

-

Notes:

1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over

temperature

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances

4. Typical values are based on average measurements at room temperature

5. Relative to minimum insertion Loss

6. This is the optimum impedance in order to achieve the performance shown

Absolute Maximum Ratings

Parameter

Rating

Operating Temperature

-30 to +85 oC

Storage Temperature

-40 to +85 oC

Input Power(7)

+5 dBm

7. Device is measured for equivalent 10K hours @ +55 ºC [CW Signal]

Operation of this device outside the parameter ranges given above may cause permanent damage.

856654

1747.5 MHz SAW Filter

Data Sheet: Rev E 8/25/11

- 3 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Reference Design 1 – 50 SE Input, 50 SE Output

Schematic

50

Single-ended

Input

1,3,4,6

2 5

3.3pF 50

50 5.1nH

0.8pF

5.6pF

13nH

4.7pF

50

Single-ended

Output

Notes:

1. No impedance matching required

2. Actual matching values may vary due to PCB layout and parasitic

PC Board

Mounting Configuration

DC

JJJYM

L1 L2

C1

C2 C3

C4

1.70

3.20 SQ

.96

1.27

.81

.38

Notes:

Top, middle & bottom layers: 1/2 oz copper

Substrates: FR4 dielectric .063” / Taconic TLY-5A .0075”

Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick

Hole plating: Copper min .0008µm

Notes:

1. All dimensions are in millimeters.

2. This footprint represents a recommendation only.

Bill of Material

Reference Desg.

Value

Description

Manufacturer

Part Number

L1

5.1 nH

Coil Wire-wound, 0402, 5%

MuRata

LQW15AN5N1B00

L2

13 nH

Coil Wire-wound, 0402, 5%

MuRata

LQW15AN13NG00

C1

4.7 pF

Chip Ceramic, 0402, 5%

MuRata

GRM15551H2R4GZ01

C2

3.3 pF

Chip Ceramic, 0402 5%

MuRata

GRM15551H3R3GZ01

C3

5.6 pF

Chip Ceramic, 0402,5%

MuRata

GRM15551H5R6GZ01

C4

0.8 pF

Chip Ceramic, 0402,5%

MuRata

GRM15551HR80KZ01

SMA

N/A

SMA connector

Radiall USA Inc.

9602-1111-018

PCB

N/A

3-layer

multiple

960700

856654

1747.5 MHz SAW Filter

Data Sheet: Rev E 8/25/11

- 4 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Typical Performance (at room temperature)

856654

1747.5 MHz SAW Filter

Data Sheet: Rev E 8/25/11

- 5 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Mechanical Information

Package Information, Dimensions and Marking

0.69

1.22 NOM.

1.32 MAX.

0.75

0.60

1.50

0.75

3.00

DC

code

Marking

Date code

JJJYM

logo

ID dot

TriQuint

Package Style: SMP-12A

Dimensions: 3.00 x 3.00 x 1.22 mm

Body: Al2O3 ceramic

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni

plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

The date code consists of day of the current year (Julian,

3 digits), Y = last digit of the year, and M = manufacturing

site code

Tape and Reel Information

Standard T/R size = 5000 units/reel. All dimensions are in millimeters

3.25

Section A-A

1.75

Ø1.5

4.0 A

12.0

5.5

Ø1.5

4.0

2.0

3.25

1.4

0.21 A

Ø102 Ø20.2

Ø13.0 2.0 Direction of travel

Ø330

12.8

2.7 logo

ID dot

TriQuint

856654

1747.5 MHz SAW Filter

Data Sheet: Rev E 8/25/11

- 6 of 6 -

Disclaimer: Subject to change without notice e

Connecting the Digital World to the Global Network ®

Product Compliance Information

ESD Information

ESD Rating: 1A

Value: Passes 300 V min.

Test: Human Body Model (HBM)

Standard: JEDEC Standard JESD22-A114

ESD Rating: A

Value: Passes 150 V min.

Test: Machine Model (MM)

Standard: JEDEC Standard JESD22-A115

Solderability

Compatible with the latest version of J-STD-020, lead

free solder, 260°C

Refer to Soldering Profile for recommended guidelines.

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment).

This product also has the following attributes:

Halogen Free (Chlorine, Bromine)

Antimony Free

TBBP-A (C15H12Br402) Free

PFOS Free

SVHC Free

MSL Rating

Devices are Hermetic, therefore MSL is not applicable

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and information about

TriQuint:

Web: www.triquint.com Tel: +1.407.886.8860

Email: info-sales@tqs.com Fax: +1.407.886.7061

For technical questions and application information:

Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain

herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint

assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained

herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with

the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest

relevant information before placing orders for TriQuint products. The information contained herein or any use of such

information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property

rights, whether with regard to such information itself or anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining

applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.

Caution! ESD-Sensitive Device