146 USA: 1-888-41-ASTEC Europe (UK): +44(0)1384-842211 Asia (HK): 852-2437-9662
SPECIAL FEATURES
•Surface mount
•High power density 15W/Cu. in.
•Full power capability without
external heat sink
•Input differential and
common mode filtering
•Hot insertable with inrush current limit
•Ability to limit inrush current in
an external input capacitor
•Input undervoltage lockout with hysteresis
•Output overvoltage protection
•Remote shutdown
ENVIRONMENTAL
Operating ambient temperature range:
-40 to +75° C (no derating)
Cooling method: Convection
MTBF: 7.5 MHrs
Storage temperature: -55 to +125 C
SAFETY
UL 1950
IEC 950
CSA C22.2-9.50
CB 52719-106
ELECTRICAL SPECIFICATIONS
Input
Input Range:......................... 36 to 75 VDC for 48V
18 to 36 VDC for 24V
Maximum Inrush
Current Limit:........................ 1.0 A Max.
Maximum External Capacitor
to Limit Inrush
Current to 1.0 A.................... 4.0µF
Low Input Shutdown:............ 34.0 +/- 2.0 V for 48V
17.0V +/- 1.0V f or 24 V
Auto Recovery:..................... 37.0V +/- 2.0 V for 48V
18.5V +/- 1.0 V for 24V
Hysteresis: ........................... 3 V +/- 1 V for 48V
1.5V +/- 0.5V for 24V
Efficiency:............................. 85%
Enable: ................................. Open Circuit or up to 0.5V max.
Disable: ................................ 4V min., 75V max.
Output
Voltage Tolerance: ................ +/- 3% for single output
+/- 5% for dual output
Noise/Ripple: ........................ 75mV rms max.
Output Voltage
Adjust Range:....................... +/- 10% for single output
dual output non adjustable
Output Voltage Protection .... Self-limiting Clamp, 140% max.
Short Circuit Protection ........ Continuous Auto Start
Switching Frequency:........... 200kHz nominal
AK40A
15 Watts
Total Power
15 Watts
Input Voltages
48V, 24V
# of Outputs
Single
AK40A Series
Surface Mount
NOTES
1. All specifications are typical at nominal input and
full load unless otherwise noted.
2. Specification subject to change without notice.
3. Mechanical dra wings for ref erence only.
4. Minimum Load: 0.2 A (min 15%)
5. Max. Capacitive Load: 330 mF