DC/DC Converters CTDD2010DF-D1K-1 Series Fixed Input Isolated & Unregulated 1W Output, Dual Output Not shown at actual size. RoHS Compliant ctparts.com SPECIFICATIONS Vin Nom. (VDC) Part Number Vin Range (VDC) Voltage Out (VDC) Io Max. (mA) Io Min. (mA) Effi. Typ. (%) CTDD2010DF-0505-D1K-1 CTDD2010DF-0509-D1K-1 CTDD2010DF-0512-D1K-1 CTDD2010DF-0515-D1K-1 5 5 5 5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 5 9 12 15 100 56 42 33 10 6 5 4 72 75 78 79 CTDD2010DF-1205-D1K-1 CTDD2010DF-1209-D1K-1 CTDD2010DF-1212-D1K-1 CTDD2010DF-1215-D1K-1 12 12 12 12 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 100 56 42 33 10 6 5 4 74 76 79 80 CTDD2010DF-2405-D1K-1 CTDD2010DF-2409-D1K-1 CTDD2010DF-2412-D1K-1 CTDD2010DF-2415-D1K-1 24 24 24 24 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 100 56 42 33 10 6 5 4 74 76 80 81 ISOLATION SPECIFICATIONS Item Test Condition MIN Isolation Voltage Tested for 1 minute 1000 VDC Isolation Resistance Test at 500VDC 1000 M Item Test Condition TYP Units MAX Units 1 W 0.1 Line regulation For Vin change of 1% Load regulation 10% to 100% full load Output voltage accuracy 1.2 % 15 % 10 See tolerance envelope graph Temperature drift 100% full load Output ripple 20MHz Bandwidth 50 Switching frequency Full load, nominal input 100 0.03 %/C 75 mVp-p KHz Note: 1. All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output unless otherwise specified. CHARACTERISTICS TYPICAL CHARACTERISTICS Temperature Derating Graph Tolerance Envelope Graph +10% +5% Nominal Voltage Output Voltage(%) Short Circuit Protection: 1 second Temperature Rise at Full Load: 25C Max. 15C Typ. Cooling: Free air convection Operating Temperature Range: -40C to +85C Storage Temperature Range: -55C to +125C Lead Temperature: 300C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >3,500,000 hours Miscellaneous: RoHS Compliant. MIN Output Power Typic a l Load Line +2.5% -2.5% -7.5% 10% 50% 100% Output Current(%) 12.18.06 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice Output Power(%) Efficiency: To 80% Temperature Range: -40C to +85C Isolation: 1KVDC Package: UL94-V0 Miscellaneous: Positive & Negative Voltage Output. No heat sink required. No external components required. Industry standard pinout. Small Footprint. DIP package style. Power Density 0.85W/cm. Low Cost. Samples available. Technologies MAX OUTPUT SPECIFICATIONS FEATURES CENTRAL TYP 120 100 80 60 40 20 0 Safe Operating Area -40 0 40 80 120 Ambient Temperature(C) DC/DC Converters ctparts.com CTDD2010DF-D1K-1 Series Fixed Input Isolated & Unregulated 1W Output, Dual Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD2010DF-D1K-1 Package 20.40 Side View 7.00 4.10 10.00 7.62 1 11 14 7 98 Bottom View 15.24 CTDD2010DF-D1K-1 Footprint 2.54 1.00o+0.15/-0 14 11 9 8 7 1 2.54 Note: All Pins on a 2.54m pitch; all pin diameters are 0.50mm; all dimensions in mm. PIN CONNECTIONS Pin Function 1 7 8 9 11 14 GND NC 0V +Vo -Vo Vin 1 14 7 11 9 8 CENTRAL Technologies 12.18.06 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice