Reinedomeal I = T = REVISIONS Lal re _ AA [22 MECHANICAL: a Ero_c0con6 nenaond y* 7 ECO-11013013 iq B50 MAX / AX MATERIALS: N -HOUSING - THERMOPLASTIC PET POLYESTER FLAMMABILITY RATING UL 94V-0. r -100 SHIELD - .010" THICK, C26800 BRASS PREPLATED WITH 30, INCH MIN SEMI-BRIGHT \ NICKEL, SOLDER TABS POST DIPPED WITH 100uINCH MIN SAC SOLDER. 2468 -MOD JACK CONTACTS - 0.0157 x 0.018 PHOSPHOR BRONZE, 50yINCH MIN OVERALL oO NICKEL UNDERPLATE, WITH SELECT S0uINCH MIN HARD GOLD FINISH PLATE. th / SOLDERTAILS WITH 100uINCH MIN MATTE TIN AND/OR SAC SOLDER DIP. . oo ia ! 13 5 |7 ZX RUBS JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS PART 68, SUB PART F. .050 TYP AX MAGNETICS .100 TYP / -IMPEDANCE: 100 OHMS TURNS RATIO (CHIP:CABLE): TX = #1, RX = tt I {- .350 -OPEN CIRCUIT INDUCTANCE (OCL}: 350uH MIN @100kHHz, 0.1VRMS, \ 8mADC BIAS FROM 0C TO 70C, TX AND RX -PERFORMANCE @ 25C: \ INSERTION LOSS {IL}: 1.1dB MAX FROM 0.5MHz TO 100MHz ; oi. RETURN LOSS (RLI: 18dB MIN FROM 0.5MHz TO 30MHz Pin Designations 7 18-20LOG(F/30)dB MIN FROM 30-1MHz TO 60MHz XS 7 12dB MIN FROM 60.1MHz TO 80MHz ~ CROSSTALK ATTENUATION: 35dB MIN FROM 0.5MHz TO 40MHz o ~ 33-20L0G(F/50)dB MIN FROM 40.1MHz TO 100MHz 555 COMMON MODE REJECTION RATIO (CMRI: 30B MIN FROM 0.5MHz TO 100MHz oO -ISOLATION VOLTAGE:2250VDC (MAX) FOR 60 SECONDS WITH A RISE TIME OF 500V/SEC. OO! g Ps & [ala] & YNIHO L-889099 & & B SRP ay GOON ~~ 4 OPERATING TEMPERATURE: FROM 0C TO +70C. a -1454.010 .050 TYP RJ-8 S LU] | | | | | | Rut UU AA INDICATED CONNECTIONS ARE FOR HUB CONFIGURATION. THE MAGNETICS ARE 6.035(8X) SYMMETRICAL, AND SUPPORT AUTO-MDI/MDIX. .062(2X) AX TE CONNECTIVITY LOGO, PART NUMBER, DATE CODE, COUNTRY OF ORIGIN AND AGENCY APPROVAL MARKING IN APPROXIMATE LOCATION SHOWN. 660 +01 5 . #.126(2X) ELECTRICAL: 755 SERIES MAGNETIC CIRCUIT AA 7 =THE PART IS RECOMMENDED FOR WAVE SOLDERING PROCESS, PREHEAT TEMPERATURE IS 120C TO 160C, 120 SECONDS TO 180 SECONDS, PEAK WAVE SOLDERING TEMPERATURE IS 260C MAX, 10 SECONDS MAX. Ns) TDN +&)RCT @)RDN 575 +-015 wor r = a aa | Suggested PCB Layout Suggested Panel Cutout 1 (Component Side) SHIELD SHIELD CMCc2 g eS 72 m7 m7 72 a a] foe] joe Zz o 2a <x < r - 2 2 6605838-1 PART NUMBER a C1=1000 pF, 2KV CAPACITOR ad TE Connectivity | | R1-R4 = 75 OHMS, 1/16 W RESISTORS 73S SERES CRCUT, PLING CAPACITOR, SHIELDED, NO PANEL GROUND TABS, NO LEDS | ae | as