991-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
SWS300/600 Series
Features
Low Cost
Active Power Factor Correction
Universal Input (85 - 265VAC)
Input Transient Protected IEC61000-4
SEMI F47 Certifi ed (208VAC Input)
Global safety Approvals
Level B EMI
Single Output General Purpose Power Supplies
Model SWS300 SWS600
Input Voltage range (1) - 85 - 265VAC (47 - 63Hz) or 120 - 370VDC*
Inrush Current (115 / 230VAC) A 20 / 40 at 25°C, cold start
Power Factor - Meets EN61000-3-2
Input Current (100/200VAC) A 3.6 / 1.8A 7.2 / 3.6A
Temperature Coeffi cient - <0.02%/°C
Overcurrent Protection - >105%, Constant current style
Overvoltage Protection V 3.3V: 4.1-5.3V, 5V: 6.25-7.5V, 12V: 13.8-16.8V
15V: 19.3-24.2V, 24V: 30-34.8V, 36V: 41.4-50.4V, 48V: 60-69.6V
Overtemperature Protection - Yes, cycle AC to reset
Hold Up Time (Typ) ms 20ms at 115/230VAC
Leakage Current (max) mA SWS300: 0.75mA , SWS600: 1.5mA
Remote Sense - None Yes
Parallel Connection - None Yes
Remote On/Off - None Yes, >4.5V to shutdown
Power Fail Signal - None Yes, open collector output
LED Indicator - Green LED = On
Operating Temperature °C -10 to +65°C (See table for derating - model specifi c)
Storage Temperature °C -30 to +85°C
Humidity (non-condensing) - 30 - 90% RH operating, 10 - 95%RH non operating
Cooling - Internal fan
Withstand Voltage - I/P to Grnd 2kVAC, I/P to O/P 3kVAC, O/P to Grnd 500VAC, O/P to CNT 100VAC for 1 min
Isolation Resistance - >100M at 25°C & 70%RH, Output to Ground 500VDC
Vibration (non operating) - 10 - 55Hz (sweep for 1 min)19.6m/s2 constant X, Y, Z 1 hour each plane)
Immunity - EN61000-4-2, -3, -4, -5, -6, -8, -11
Safety Agency Approvals - UL60950-1, CSA60950-1, EN60950-1, EN50178, CE Mark, SEMI F47 (208VAC)
Conducted & Radiated EMI - EN55011 / EN55022-B, FCC Class B
Recommended EMI Filter - MC1206 MC1210
Weight (Typ) g 950 2000
Size (WxHxD) in 2.05 x 4.01 x 7.8” 3.62 x 4.72 x 7.48”
Warranty yrs Two Years
Notes: (1) Derate linearly to 80% load from 115VAC to 85VAC input (derate to 90% load for SWS600-5, no derating SWS300, 600-3)
Specifi cations
Key Market Segments & Applications
*Safety certifi ed for AC input only
1001-800-526-2324 • www.us.tdk-lambda.com/lp/ Revision B1: Sept. 2014
SWS300/600 Series
For Additional Information, please visit
us.tdk-lambda.com/lp/products/sws-series.htm
Outline DrawingSWS300 Outline Drawing
S
apped at the bottom chassis
apped on both sides
S
S
apped on both sides
A A
ole at the opposite chassis
A
A
1500.5
00.5
1201
-3.5
21
8-4
500.5 21
21
25
25
20 20
10 1000.5
101
10
20 1500.5 20
5A
AIR F
21
34
11
.5
21A
15A
2
.5
10
3
16.5
.0
8.2
F
A
-S
S - -
.A
INPUT: 100-240VAC ~ 4.4A
N
H+V +V+V -V -V -V L
50/60Hz
MADE IN CHINA
BAR CODE
OUTPUT: 5 V 55 A
SWS300- 5
V ADJ
HWS 15-1500W Single Output, High Reliability
SWS 50-150W Single Output
ZWS 5-240W PCB style Single Output
Notes:
(2) Peak rating of 120A for 10s (3) 115/230VAC
Other Industrial Products
Max Load Line Ripple
Adjust Curr. Reg Reg Noise Eff.(3)
Model Voltage Range (A) (mV) (mV) (mV) (typ)%
SWS300-3 3.3V 2.97-3.96V 55 40 20 120 67/70
SWS300-5 5V 4.5-6V 55 40 20 120 75/78
SWS300-12 12V 9.6-13.2V 26 96 48 120 77/80
SWS300-15 15V 13.2-18.6V 21 120 48 120 79/83
SWS300-24 24V 20-28.8V 13 120 48 150 80/84
SWS300-36 36V 28.8-40V 8.7 180 72 200 82/85
SWS300-48 48V 40-57.6V 6.7 240 96 240 82/85
SWS600-3 3.3V 2.97-3.96V 100 (2) 40 20 100 69/71
SWS600-5 5V 4.5-6V 100 (2) 40 20 100 74/77
SWS600-12 12V 9.6-13.2V 50 96 48 120 78/81
SWS600-15 15V 13.2-18.6V 40 120 48 120 80/83
SWS600-24 24V 20-28.8V 25 120 48 150 81/84
SWS600-36 36V 28.8-40V 16.7 180 72 200 81/85
SWS600-48 48V 40-57.6V 12.5 240 96 240 82/85
Model 50°C 55°C 60°C 65°C
SWS300 100% 91.6% 83.3% 50%
SWS600 100% 85% 70% 55%
Additional derating required when operating SWS600 with side
ventilation holes blocked - see installation manual.
Suffi x Descriptor
/CO2 Double sided conformal coating
Model Selector Derating
Options
N
ot Recomended For New Desi
g
n
s
