SIDACtor® Protection Thyristors
195
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
High Surge Current Protection
SIDACtor® Primary Protection Series - Modified TO-220
The SIDACtor® Primary Protection Series Modified TO-220
are thyristor devices designed for use in primary protection
applications.
The series provides a single port overvoltage solution that
enables applications to comply with GR-974 and a range of
other global regulatory standards. Please contact Littelfuse
to discuss your particular application and regulatory
requirements.
Description
Features and Benefits
t High holding current
options available
t Failsafe option
available
t Low voltage overshoot
t Low on-state voltage
t Does not degrade with
use
t Fails short circuit
when surged in
excess of ratings
t Single-port protection
t Modified TO-220
Package
t Lead forms available
1
2
3
(T)
(R)
(G)
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
PIN 1
PIN 2
PIN 3
Applicable Global Standards
t(3
t6-
t*56,
Electrical Characteristics
Part
Number Marking
VDRM
@lDRM=5μA
VS
@100V/μs
VDRM
@lDRM=5μA
VS
@100V/μs
VT
@IT=2.2 A IH*I
SIT
Capacitance
@1MHz, 2V bias
V min V max V min V max V max mA
min
mA
max
A
max pF min pF max
Pins 1-2, 3-2 Pins 1-3 Pins 1-2, 3-2
P0602ACLxx P0602AC 25 40 50 80 4 50 800 2.2
See
Capacitance
Values
Table
P1402ACLxx P1402AC 58 77 116 154 4 150 800 2.2
P1602ACLxx P1602AC 65 95 130 190 4 150 800 2.2
P2202ACLxx P2202AC 90 130 180 260 4 150 800 2.2
P2702ACLxx P2702AC 120 160 240 320 4 150 800 2.2
P3002ACLxx P3002AC 140 180 280 360 4 150 800 2.2
P3602ACLxx P3602AC 170 220 340 440 4 150 800 2.2
P4202ACLxx P4202AC 190 250 380 500 4 150 800 2.2
P4802ACLxx P4802AC 220 300 440 600 4 150 800 2.2
P6002ACLxx P6002AC 275 350 550 700 4 150 800 2.2
Notes:
* Higher holding current available by special order. Contact Littelfuse for additional information.
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional (unless otherwise noted).
- xx Part Number Suffix: ‘RP’ (Reel pack), Blank (Bulk pack), ‘60’ (Type 60 lead form bulk pack),
‘FS1’ (Failsafe option bulk pack). Refer to Part Numbering section for additional details.
SIDACtor® Protection Thyristors
196
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
High Surge Current Protection
Capacitance Values
Part Number
Pin 1-2 / 3-2
Tip-Ground, Ring-Ground
Pin 1-3
Tip-Ring
pF min pF max pF min pF max
P0602ACLxx 35 65 20 40
P1402ACLxx 105 155 60 90
P1602ACLxx 95 145 50 85
P2202ACLxx 75 115 40 65
P2702ACLxx 70 105 40 60
P3002ACLxx 65 95 35 55
P3602ACLxx 65 90 35 50
P4202ACLxx 60 85 35 50
P4802ACLxx 60 85 30 50
P6002ACLxx 55 80 30 45
Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias.
Package Symbol Parameter Value Unit
Modified
TO-220 TJ
Operating Junction
Temperature Range
-40 to
°C
TS
Storage Temperature
Range
-65 to
°C
R0JA
Thermal Resistance:
Junction to Ambient 60 °C/W
Thermal Considerations
IH
IT
IS
IDRM
VDRM
VT
+V
-V
+I
-I
VS
50
100
0
t
r
t
d
0
Peak
Value
Half Value
t – Time (μs)
I
PP
– Peak Pulse Current – %I
PP
t
r
= rise time to peak value
t
d
= decay time to half value
Waveform = t
r
x t
d
V-I Characteristics
tr x td Pulse Waveform
-8
-40 -20 0 20 40 60 80 100 120 140 160
-6
-4
0
2
4
6
8
10
12
14
Junction Temperature (TJ) – °C
Percent of VS Change – %
25 °C
25°C
Case Temperature (T
C
) - ºC
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20 0 20 40 60 80 100 120 140 160
Ratio of I
H
I
H
(T
C
= 25ºC)
Normalized VS Change vs. Junction Temperature
Normalized DC Holding Current vs. Case Temperature
Surge Ratings
Series
IPP ITSM
50/60 Hz di/dt
0.2x310 1
0.5x700 2
2x10 1
2x10 2
8x20 1
1.2x50 2
10x160 1
10x160 2
10x560 1
10x560 2
5x320 1
9x720 2
10x360 1
10x360 2
10x1000 1
10x1000 2
5x310 1
10x700 2
A min A min A min A min A min A min A min A min A min A min A/μs min
C 50 500 400 200 150 200 175 100 200 50 500
PIN 1
PIN 2
PIN 3
Notes:
1 Current waveform in μs
2 Voltage waveform in μs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$
- The device must initially be in thermal equilibrium with -40°C < TJ <¡$
SIDACtor® Protection Thyristors
197
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
High Surge Current Protection
Soldering Parameters
Physical Specifications Environmental Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material UL recognized epoxy meeting flammability
classification 94V-0
Part Numbering
CONSTRUCTION
VARIABLE
PACKING OPTIONS
IPP RATING
RoHS COMPLIANT
TYPE
P = SIDACtor
P
CLxx
MEDIAN VOLTAGE
PACKAGE TYPE
xxx 2 A
Blank: Bulk
RP: Reel Pack
60: Type 60 Lead Form
(for type 60 orders, contact factory).
CONSTRUCTION
VARIABLE
FAILSAFE OPTION*
IPP RATING
RoHS COMPLIANT
TYPE
P = SIDACtor
P
C L FS1
MEDIAN VOLTAGE
PACKAGE TYPE
xxx 2 A
* Failsafe devices are only offered in
bulk pack, reel pack not available.
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak ¡$PS¡$
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Temp Cycling
¡$UP¡$NJOEXFMMVQUP
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC¡$3)VQUPIST&*"
JEDEC, JESD22-A-101
High Temp Storage ¡$IST.*-45%.FUIPE
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
¡$UP¡$NJOEXFMMTFDUSBOTGFS
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
¡$3)BUNVQUPIST&*"
JEDEC, JESD22-A-102
Resistance to Solder
Heat ¡$TFDT.*-45%.FUIPE
Moisture Sensitivity
Level
3)¡$ISTSFnPXDZDMFT
¡$1FBL+&%&$+45%-FWFM
Reflow Condition Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (Ts(min))¡$
- Temperature Max (Ts(max))¡$
- Time (Min to Max) (ts)60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak) 3°C/sec. Max.
TS(max) to TL - Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus) ¡$
- Temperature (tL)60-150 secs.
Peak Temp (TP)¡$
Time within 5°C of actual Peak Temp (tp)30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (TP)8 min. Max.
Do not exceed ¡$
Part Marking
xxxxx
XXXXXXXXX
Part Marking Code
(Refer to Electrical Characteristics Table)
Date Code
SIDACtor® Protection Thyristors
198
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
High Surge Current Protection
Dimensions - Modified TO-220
D
F
P
G
A O
Tem p er at u r e
Measurement
Po i n t
PIN 3
PIN 2
PIN 1
J
H
L
KM
N
The modified TO-220 package is designed to
meet mechanical standards as set forth in
JEDEC publication number 95.
Inches Millimeters
Min Max Min Max
A 0.400 0.410 10.16 10.42
D 0.360 0.375 9.14 9.53
F 0.110 0.130 2.80 3.30
G 0.540 0.575 13.71 14.61
H 0.025 0.035 0.63 0.89
J 0.195 0.205 4.95 5.21
K 0.095 0.105 2.41 2.67
L 0.060 0.075 1.52 1.90
M 0.070 0.085 1.78 2.16
N 0.018 0.024 0.46 0.61
O 0.178 0.188 4.52 4.78
P 0.290 0.310 7.37 7.87
Dimensions - Modified TO-220 Type 60 with Failsafe
Dimensions - Modified TO-220 with Failsafe
Tape and Reel Specification - Modified TO-220
1.626
(41.15)
0.720
(18.29) 0.360
(9.14)
0.240
(6.10) 0.019
(0.5)
0.750 ± 0.010
(19.05 ± 0.25)
0.500
(12.7)
0.100
(2.54) 0.100
(2.54)
14.173 (360.0)
Dimensions are in inches
(and millimeters).
1.968
(50.0)
Direction of Feed
Packing Options
Package
Type Description Quantity Added Suffix Industry
Standard
A
Modified TO-220
Tape and Reel Pack 700 RP EIA-468-B
Modified TO-220
Bulk Pack 500 (no added suffix) N/A
Modified TO-220
Type 60 Lead Form
Bulk Pack
500
60
(special order item,
contact factory for details)
N/A
