PD60T
PD60T
1. Subminiature (Dimensions : 3.2 × 1.6 × 0.8mm)
2. Thin type (Thickness : 0.8mm)
3. Surface mount type (leadless type)
4. Taped model (4 000pcs./reel)
Chip Type Photodiode
■ Features
1. Pagers
2. Cellular phones
3. Other portable equipment
■ Applications
■ Outline Dimensions (Unit : mm)
■ Absolute Maximum Ratings
Plating area
3
1.6±0.15
0.8
0.8
0.6
R0.25
Chip size : 0.62×1.42
(Reference dimensions)
Light detector size : 0.4×1.2
(
Reference dimensions/including electrode
)
0.8
1.0
0.80.5
0.3
3.2±0.15
1
2
2 3
3
1
2
1
4
4
4
Anode
Cathode
❈ Unspecified tolerance : ±0.1mm
❈ ( ) : Reference dimensions
Internal connection diagram
Cathode mark
Parameter Symbol Rating Unit
30 V
50 mW
−25 to +85 ˚C
Storage temperature −40 to +100 ˚C
260 ˚C
Operating temperature
Reverse voltage
Power dissipation
VR
P
Tstg
Topr
(Ta=25˚C)
Soldering temperature Tsol
*1 Hand soldering temperature, for MAX. 3s
*1
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
PD60T
■ Electro-optical Characteristics
Parameter Symbol Unit
V
pF
µA
nm
Short circuit current
Dark current ISC
Id
ns
nA
ns
Ev=1 000 lx
Ev=0, VR=10V
VR=10V, f=1MHz
MIN.
−
−
−−
MAX.Conditions
VR=10V, RL=1 000Ω
VR=10V, RL=1 000Ω
TYP.
4.5
−
2.8
−
−
−
30
−
−
−
−
250
250
−
−
6.9
10
50
940
3
50
±65
Reverse voltage
(Ta=25˚C)
VR
Ct
Rise time tr
Fall time tf
Response time
∆θ
λp
Peak sensitivity wavelength
Half intensity angle
IR=10µA
˚
Terminal capacitance
*2 Ev=Illuminance by CIE standard light source A (tungsten lamp)
*2
115
Application Circuits
NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
