2688491 - PHOENIX CONTACT - Product.Network

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page1/14

I/O module-AXL F AI4 I 1H-2688491

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

AxiolineF, Analog input module, Analog inputs: 4, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection

method: 2, 3, 4-wire, transmission speed in the local bus: 100 Mbps, integrated sensor supply, degree of

protection: IP20, including bus base module and AxiolineF connectors

Product Description

The module is designed for use within an AxiolineF station.

It is used to acquire analog current signals.

Your advantages

4 analog, bipolar input channels for the connection of current signals

Connection of sensors in 2, 3, and 4-wire technology

Current ranges: 0mA ... 20mA, 4mA ... 20mA, ±20mA

Simultaneous scanning of all channels by means of simultaneous sampling

High crosstalk attenuation between the channels, thanks to separate signal paths

Particularly robust against electromagnetic interference

Device rating plate stored

Key Commercial Data

Packing unit 1 pc

GTIN

GTIN 4046356744225

Weight per Piece (excluding packing) 200.000 g

Custom tariff number 85389091

Country of origin Germany

Technical data

Dimensions

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page2/14

I/O module-AXL F AI4 I 1H-2688491

Technical data

Dimensions

Width 35 mm

Height 126.1 mm

Depth 54 mm

Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to

EN60715).

Ambient conditions

Ambient temperature (operation) -25 °C ... 60 °C

Ambient temperature (storage/transport) -40 °C ... 85 °C

Permissible humidity (operation) 5 % ... 95 % (non-condensing)

Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level)

Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level)

Degree of protection IP20

Connection data

Designation AxiolineF connector

Connection method Push-in connection

Note on the connection method Please observe the information provided on conductor cross sections in

the “AxiolineF: system and installation” user manual.

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section flexible min. 0.2 mm²

Conductor cross section flexible max. 1.5 mm²

Conductor cross section AWG min. 24

Conductor cross section AWG max. 16

Stripping length 8 mm

General

Mounting type DIN rail

Color traffic grey A RAL 7042

Net weight 195.9 g

Note on weight specifications with connectors and bus base module

Mounting position any (no temperature derating)

Interfaces

Designation AxiolineFlocal bus

No. of channels 2

Connection method Bus base module

Transmission speed 100 Mbps

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page3/14

I/O module-AXL F AI4 I 1H-2688491

Technical data

Axioline potentials

Designation AxiolineF local bus supply (UBus)

Supply voltage 5 VDC (via bus base module)

Current consumption typ. 120 mA

max. 150 mA

Designation Supply for analog modules (UA)

Supply voltage 24 VDC (I/O supply and sensor supply)

Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple)

Current consumption max. 45 mA (IiS = 0 mA)

typ. 118 mA (IiS = 4 x 20 mA (nominal load))

max. 125 mA (IiS = 4 x 20 mA (nominal load))

typ. 238 mA (IiS = 4 x 50 mA (full load))

max. 245 mA (IiS = 4 x 50 mA (full load))

Power consumption typ. 1.5 W (at UBus and UA)

max. 1.83 W (at UBus and UA)

Protective circuit Surge protection of the supply voltage electronic (35 V, 0.5 s)

Polarity reversal protection of the supply voltage up to HW02: polarity

protection diodeas of HW03: parallel diode; with external 5A fuse (for

startup only)

Transient protection supply voltage Suppressor diode

Analog inputs

Description of the input Differential inputs, current

Input name Analog inputs

Number of inputs 4

Connection method Push-in connection

Connection technology 2, 3, 4-wire

Note regarding the connection technology shielded

A/D conversion time 31.25 µs

A/D converter resolution 16 bit

Limit frequency (3 dB) 30 Hz

12 kHz

Type of protection Transient protection of inputs

Overload protection of the inputs

Data formats IB IL, S7-compatible

Measured value representation 16 bits (15 bits + sign bit)

Current input signal 0 mA ... 20 mA

4 mA ... 20 mA

-20 mA ... 20 mA

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page4/14

I/O module-AXL F AI4 I 1H-2688491

Technical data

Analog inputs

Input resistance current input 104 Ω (typical)

Input filter 30 Hz, 12 kHz and mean-value generation (can be parameterized)

Electrical isolation

Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1

min.

5 V supply (logic)/analog inputs 500 V AC 50 Hz 1 min.

5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min.

24 V supply (I/O)/analog inputs 500 V AC 50 Hz 1 min.

24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min.

Analog inputs/functional earth ground 500 V AC 50 Hz 1 min.

Standards and Regulations

Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g

Shock in acc. with EN60068-2-27/IEC60068-2-27 30g

Continuous shock according to EN60068-2-27/IEC60068-2-27 10g

Protection class III (IEC61140, EN61140, VDE0140-1)

Environmental Product Compliance

REACh SVHC Lead 7439-92-1

China RoHS Environmentally Friendly Use Period = 50

For details about hazardous substances go to tab “Downloads”, Category

“Manufacturer's declaration”

Drawings

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page5/14

I/O module-AXL F AI4 I 1H-2688491

Connection diagram

Differential current input with passive 2-wire transmitter (current loop)

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page6/14

I/O module-AXL F AI4 I 1H-2688491

Connection diagram

Differential current input with passive 2-wire transmitter (current loop)

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page7/14

I/O module-AXL F AI4 I 1H-2688491

Connection diagram

Passive pressure sensor at a differential current input

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page8/14

I/O module-AXL F AI4 I 1H-2688491

Connection diagram

Connection for current measurment

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page9/14

I/O module-AXL F AI4 I 1H-2688491

Block diagram

Internal wiring of the terminal points

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page10/14

I/O module-AXL F AI4 I 1H-2688491

Dimensional drawing

Classifications

eCl@ss

eCl@ss 4.0 27240400

eCl@ss 4.1 27240400

eCl@ss 5.0 27242200

eCl@ss 5.1 27242600

eCl@ss 6.0 27242600

eCl@ss 7.0 27242601

eCl@ss 8.0 27242601

eCl@ss 9.0 27242601

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page11/14

I/O module-AXL F AI4 I 1H-2688491

Classifications

ETIM

ETIM 3.0 EC001599

ETIM 4.0 EC001599

ETIM 5.0 EC001596

ETIM 6.0 EC001596

ETIM 7.0 EC001596

UNSPSC

UNSPSC 6.01 43172015

UNSPSC 7.0901 43201404

UNSPSC 11 39121311

UNSPSC 12.01 39121311

UNSPSC 13.2 32151602

UNSPSC 18.0 32151602

UNSPSC 19.0 32151602

UNSPSC 20.0 32151602

UNSPSC 21.0 32151602

Approvals

DNV GL / PRS / BV / LR / KR / ABS / BSH / RINA / UL Listed / cUL Listed / EAC / cULus Listed

Ex Approvals

Approval details

DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF

PRS http://www.prs.pl/ TE/2239/880590/19

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page12/14

I/O module-AXL F AI4 I 1H-2688491

Approvals

BV http://www.veristar.com/portal/veristarinfo/generalinfo/

approved/approvedProducts/equipmentAndMaterials 36433/B0 BV

LR http://www.lr.org/en 14-20019

KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002

ABS http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1767360-PDA

BSH http://www.bsh.de/de/index.jsp 840

RINA http://www.rina.org/en ELE256518XG

UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705

cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705

EAC  EAC-Zulassung

cULus Listed  

Accessories

https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page13/14

I/O module-AXL F AI4 I 1H-2688491

Accessories

Device marking

Insert label-EMT (35X28)R-0801602

Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,

THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker

carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500



DIN rail connector

Bus connector-AXL F BS H-2700992

AxiolineF bus base module for housing type H



Shield connection

Shield connection-AXL SHIELD SET-2700518

Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps)



Terminal marking

Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579

Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with

B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER



https://www.phoenixcontact.com/us/products/2688491

01/25/2020Page14/14

I/O module-AXL F AI4 I 1H-2688491

Accessories

Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580

Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:

snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5

mm, Number of individual labels: 50



http://www.phoenixcontact.com