https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AxiolineF, Analog input module, Analog inputs: 4, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection method: 2, 3, 4-wire, transmission speed in the local bus: 100 Mbps, integrated sensor supply, degree of protection: IP20, including bus base module and AxiolineF connectors Product Description The module is designed for use within an AxiolineF station. It is used to acquire analog current signals. Your advantages 4 analog, bipolar input channels for the connection of current signals Connection of sensors in 2, 3, and 4-wire technology Current ranges: 0mA ... 20mA, 4mA ... 20mA, 20mA Simultaneous scanning of all channels by means of simultaneous sampling High crosstalk attenuation between the channels, thanks to separate signal paths Particularly robust against electromagnetic interference Device rating plate stored Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356744225 Weight per Piece (excluding packing) 200.000 g Custom tariff number 85389091 Country of origin Germany Technical data Dimensions 01/25/2020Page1/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Technical data Dimensions Width 35 mm Height 126.1 mm Depth 54 mm Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to EN60715). Ambient conditions Ambient temperature (operation) -25 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level) Degree of protection IP20 Connection data Designation AxiolineF connector Connection method Push-in connection Note on the connection method Please observe the information provided on conductor cross sections in the "AxiolineF: system and installation" user manual. Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 1.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 1.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Stripping length 8 mm General Mounting type DIN rail Color traffic grey A RAL 7042 Net weight 195.9 g Note on weight specifications with connectors and bus base module Mounting position any (no temperature derating) Interfaces Designation AxiolineFlocal bus No. of channels 2 Connection method Bus base module Transmission speed 100 Mbps 01/25/2020Page2/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Technical data Axioline potentials Designation AxiolineF local bus supply (UBus) Supply voltage 5 VDC (via bus base module) Current consumption typ. 120 mA max. 150 mA Designation Supply for analog modules (UA) Supply voltage 24 VDC (I/O supply and sensor supply) Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current consumption max. 45 mA (IiS = 0 mA) typ. 118 mA (IiS = 4 x 20 mA (nominal load)) max. 125 mA (IiS = 4 x 20 mA (nominal load)) typ. 238 mA (IiS = 4 x 50 mA (full load)) max. 245 mA (IiS = 4 x 50 mA (full load)) Power consumption typ. 1.5 W (at UBus and UA) max. 1.83 W (at UBus and UA) Protective circuit Surge protection of the supply voltage electronic (35 V, 0.5 s) Polarity reversal protection of the supply voltage up to HW02: polarity protection diodeas of HW03: parallel diode; with external 5A fuse (for startup only) Transient protection supply voltage Suppressor diode Analog inputs Description of the input Differential inputs, current Input name Analog inputs Number of inputs 4 Connection method Push-in connection Connection technology 2, 3, 4-wire Note regarding the connection technology shielded A/D conversion time 31.25 s A/D converter resolution 16 bit Limit frequency (3 dB) 30 Hz 12 kHz Type of protection Transient protection of inputs Overload protection of the inputs Data formats IB IL, S7-compatible Measured value representation 16 bits (15 bits + sign bit) Current input signal 0 mA ... 20 mA 4 mA ... 20 mA -20 mA ... 20 mA 01/25/2020Page3/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Technical data Analog inputs Input resistance current input 104 (typical) Input filter 30 Hz, 12 kHz and mean-value generation (can be parameterized) Electrical isolation Test section 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. 5 V supply (logic)/analog inputs 500 V AC 50 Hz 1 min. 5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. 24 V supply (I/O)/analog inputs 500 V AC 50 Hz 1 min. 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. Analog inputs/functional earth ground 500 V AC 50 Hz 1 min. Standards and Regulations Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g Shock in acc. with EN60068-2-27/IEC60068-2-27 30g Continuous shock according to EN60068-2-27/IEC60068-2-27 10g Protection class III (IEC61140, EN61140, VDE0140-1) Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 01/25/2020Page4/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Connection diagram Differential current input with passive 2-wire transmitter (current loop) 01/25/2020Page5/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Connection diagram Differential current input with passive 2-wire transmitter (current loop) 01/25/2020Page6/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Connection diagram Passive pressure sensor at a differential current input 01/25/2020Page7/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Connection diagram Connection for current measurment 01/25/2020Page8/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Block diagram Internal wiring of the terminal points 01/25/2020Page9/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Dimensional drawing Classifications eCl@ss eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 27242200 eCl@ss 5.1 27242600 eCl@ss 6.0 27242600 eCl@ss 7.0 27242601 eCl@ss 8.0 27242601 eCl@ss 9.0 27242601 01/25/2020Page10/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Classifications ETIM ETIM 3.0 EC001599 ETIM 4.0 EC001599 ETIM 5.0 EC001596 ETIM 6.0 EC001596 ETIM 7.0 EC001596 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 39121311 UNSPSC 13.2 32151602 UNSPSC 18.0 32151602 UNSPSC 19.0 32151602 UNSPSC 20.0 32151602 UNSPSC 21.0 32151602 Approvals Approvals Approvals DNV GL / PRS / BV / LR / KR / ABS / BSH / RINA / UL Listed / cUL Listed / EAC / cULus Listed Ex Approvals Approval details DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF PRS http://www.prs.pl/ TE/2239/880590/19 01/25/2020Page11/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Approvals http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials 36433/B0 BV LR http://www.lr.org/en 14-20019 KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002 ABS http://www.eagle.org/eagleExternalPortalWEB/ 18-HG1767360-PDA BSH http://www.bsh.de/de/index.jsp 840 BV RINA http://www.rina.org/en ELE256518XG UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 EAC EAC-Zulassung cULus Listed Accessories Accessories 01/25/2020Page12/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Accessories Device marking Insert label-EMT (35X28)R-0801602 Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker carrier, lettering field size: 35 x 28 mm, Number of individual labels: 500 DIN rail connector Bus connector-AXL F BS H-2700992 AxiolineF bus base module for housing type H Shield connection Shield connection-AXL SHIELD SET-2700518 Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps) Terminal marking Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579 Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER 01/25/2020Page13/14 https://www.phoenixcontact.com/us/products/2688491 I/O module-AXL F AI4 I 1H-2688491 Accessories Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5 mm, Number of individual labels: 50 Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 01/25/2020Page14/14