To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM DESCRIPTION The M5M5256DFP,VP is 262,144-bit CMOS static RAMs organized as 32,768-words by 8-bits which is f abricated using high-perf ormance 3 poly silicon CMOS technology . The use of resistiv e load NMOS cells and CMOS periphery results in a high density and low power static RAM. Stand-by current is small enough f or battery back-up application. It is ideal f or the memory sy stems which require simple interf ace. Especially the M5M5256DVP are packaged in a 28-pin thin small outline package. FEATURE Ty pe Power supply current Access Oprating time Temperature Activ e Stand-by (max) (max) (max) PIN CONFIGURATION (TOP VIEW) A14 A12 1 28 2 A7 A6 A5 A4 3 27 26 4 25 A3 A2 A1 A0 DQ1 DQ2 7 A13 A8 24 A9 23 A11 22 /OE 8 21 9 20 5 6 Vcc /W 10 19 11 18 12 17 13 16 A10 /S DQ8 DQ7 DQ6 DQ5 15 DQ4 DQ3 GND 14 Outline 28P2W-C (FP) 20A M5M5256DFP,VP (Vcc= 5.5V) 70ns -70G 0~70 C 12A (Vcc= 3.6V) 45mA (Vcc= 5.5V) M5M5256DFP,VP 70ns -70GI 40A (Vcc= 5.5V) -40~85 C 24A 25mA (Vcc= 3.6V) (Vcc= 3.6V) 5A (Vcc= 5.5V) M5M5256DFP,VP -70XG 70ns 0~70 C *Single 3.0~5.5V power supply *No clocks, no ref resh *Data-Hold on +2.0V power supply *Directly TTL compatible : all inputs and outputs *Three-state outputs : OR-tie capability */OE prev ents data contention in the I/O bus *Common Data I/O *Battery backup capability *Low stand-by current .......... 0.05A(ty p.) 2.4A (Vcc= 3.6V) 22 /OE 23 A11 24 25 26 27 28 1 2 3 4 0.05A 5 (Vcc= 3.0V Typical) 6 7 A9 A8 A13 /W Vcc A14 A12 A7 A6 A5 A4 A3 M5M5256DVP Outline A10 21 /S 20 DQ8 19 DQ7 18 DQ6 17 DQ5 16 DQ4 15 GND 14 DQ3 13 DQ2 12 DQ1 11 A0 10 A1 9 A2 8 28P2C-A (VP) PACKAGE M5M5256DFP M5M5256DVP : 28 pin 450 mil SOP 2 : 28pin 8 X 13.4 mm TSOP APPLICATION Small capacity m emory units 1 RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM The operation mode of the M5M5256DFP,VP is determined by a combination of the dev ice control inputs /S, /W and /OE. Each mode is summarized in the f unction table. A write cy cle is executed whenev er the low lev el /W ov erlaps with the low lev el /S. The address must be set up bef ore the write cy cle and must be stable during the entire cy cle. The data is latched into a cell on the trailing edge of /W, /S, whichev er occurs f irst, requiring the setup and hold time relativ e to these edge to be maintained. The output enable /OE directly controls the output stage. Setting the /OE at a high lev el,the output stage is in a high-impedance state, and the data bus contention problem in the write cy cle is eliminated. A read cy cle is executed by setting /W at a high lev el and /OE at a low lev el while /S are in an activ e state. When setting /S at a high lev el, the chip is in a nonselectable mode in which both reading and writing are disabled. In this mode, the output stage is in a highimpedance state, allowing OR-tie with other chips and memory expansion by /S. The power supply current is reduced as low as the stand-by current which is specif ied as Icc3 or Icc4, and the memory data can be held at +2V power supply , enabling battery back-up operation during power f ailure or power-down operation in the nonselected mode. FUNCTION TABLE /S /W /OE Mode DQ Icc H X X Non selection High-impedance Stand-by L L X Write D IN Activ e L H L Read D OUT Activ e High-impedance Activ e L H H Note * "H" and "L" in this table mean VIH and VIL, respectiv ely . * "X" in this table should be "H" or "L". BLOCK DIAGRAM ADDRESS INPUT A8 25 A 13 26 A 14 1 A 12 22 A7 3 A6 4 A5 5 A4 6 A3 7 A2 8 A1 9 A0 10 A 10 21 A 11 23 A9 24 WRITE CONTROL INPUT /W 27 CHIP SELECT INPUT 20 /S OUTPUT ENABLE /OE INPUT 22 32768 WORD X 8BIT 11 DQ1 12 DQ2 13 DQ3 15 DQ4 16 DQ5 17 DQ6 18 DQ7 19 DQ8 28 VCC (5V) 14 GND (0V) (512 ROWS X 512 COLUMNS) DATA I/O CLOCK GENERATOR 2 RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM ABSOLUTE MAXIMUM RATINGS Conditions Symbol Parameter Supply voltage Vcc VI Input voltage Output voltage VO Pd Power dissipation T opr Operating temperature T stg Storage temperature Ratings -0.3 * ~7.0 -0.3 * ~Vcc+0.3 With respect to GND Unit V V V mW (Max 7.0) 0~Vcc 700 0~70 -40~85 -65~150 Ta=25C -G,-XG -GI C C _ 30ns ) * -3.0V in case of AC ( Pulse width < DC ELECTRICAL CHARACTERISTICS Limits2 Limits1 Symbol Parameter (Vcc=3.30.3V) Test conditions (Vcc=5.00.5V) Unit Min Typ Max Min Typ Max V IH High-level input voltage 2.0 V IL Low-level input voltage -0.3* V OH1 High-level output voltage 1 V OH2 V OL II IO Icc1 Icc2 IOH=-1mA IOH=-0.5mA IOH=-0.1mA High-level output voltage 2 IOH=-0.05mA IOL=2mA Low-level output voltage IOL=1mA (Vcc=5.00.5V) (Vcc=3.30.3V) (Vcc=5.00.5V) (Vcc=3.30.3V) (Vcc=5.00.5V) (Vcc=3.30.3V) Input current V I =0 ~ Vcc Output current in off-state /S=V IH or or /OE=V IH, V I/O =0 ~ Vcc Active supply current _ /S<0.2V, Output-open (AC, MOS lev el ) Other inputs<0.2V or >Vcc-0.2V Active supply current /S=V IL, Output-open other inputs=VIH or V IL (AC, TTL lev el ) ~25C Icc3 Icc4 Stand-by current Stand-by current Vcc +0.3 Vcc +0.3 2.2 0.6 -0.3* V 0.8 V 2.4 2.4 V Vcc -0.5 Vcc -0.5 V 0.4 0.4 V 1 1 1 1 A 70ns 13 25 25 40 1MHz 1.5 3 2 4 70ns 14 25 25 45 1MHz 1.5 3 1.2 4 8 2 -G,-GI -XG 0.05 0.3 -G,-GI _ /S>Vcc-0.2V, ~40C -XG other inputs =0~Vcc -G,-GI ~70C -XG ~85C -GI /S=V IH,other inputs=0~ Vcc A mA mA 0.1 0.4 3.6 6 0.8 1.2 12 20 2.4 24 5 40 0.33 3 A mA * -3.0V in case of AC ( Pulse width _ < 30ns ) CAPACITANCE Symbol CI CO Parameter Input capacitance Output capacitance Test conditions V I =GND, V I =25mVrms, f=1MHz V O =GND,V O =25mVrms, f=1MHz Min Limits Typ Max 6 8 Unit pF pF Note 0: Direction f or current f lowing into an IC is positiv e (no mark). 1: Ty pical v alue is one at Ta = 25C. 2: C I , C O are periodically sampled and are not 100% tested. 3 RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM AC ELECTRICAL CHARACTERISTICS (1) READ CYCLE Symbol tCR ta(A) ta(S) ta(OE) tdis(S) tdis(OE) ten(S) ten(OE) tV(A) Parameter Read cycle time Address access time Chip select access time Output enable access time Output disable time after /S high Output disable time after /OE high Output enable time after /S low Output enable time after /OE low Data valid time after address Limits1 Limits2 Vcc=3.30.3V Vcc=5.00.5V Min 70 Max Min 70 70 70 35 25 25 5 5 10 Unit Max 70 70 35 25 25 5 5 10 ns ns ns ns ns ns ns ns ns (2) WRITE CYCLE Symbol Parameter tCW Write cycle time tw(W) Write pulse width tsu(A) Address setup time tsu(A-WH) Address setup time with respect to /W high tsu(S) Chip select setup time tsu(D) Data setup time th(D) Data hold time trec(W) Write recovery time tdis(W) Output disable time from /W low tdis(OE) Output disable time from /OE high ten(W) Output enable time from /W high ten(OE) Output enable time from /OE low Limits1 Limits2 Vcc=3.30.3V Vcc=5.00.5V Min 70 55 0 65 65 30 0 0 Max Min 70 50 0 65 65 30 0 0 25 25 5 5 Max 25 25 5 5 Unit ns ns ns ns ns ns ns ns ns ns ns ns 4 RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM (3) TIMING DIAGRAMS Read cycle tCR A 0~ 14 ta(A) tv (A) ta (S) /S (Note 3) ta (OE) tdis(S) (Note 3) tdis (OE) (Note 3) ten (OE) /OE (Note 3) ten (S) DATA VALID DQ1~ 8 /W = "H" lev el Write cycle (/W control mode) tCW A 0~ 14 t su (S) /S (Note 3) (Note 3) tsu (A-WH) /OE tsu (A) tw (W) trec (W) /W tdis (W) tdis (OE) ten (W) ten(OE) DATA IN STABLE DQ1~ 8 (Note 3) (Note 3) tsu (D) th (D) 5 RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM Write cycle ( /S control mode) tCW A 0~ 14 tsu (A) tsu (S) trec (W) /S (Note 5) /W (Note 4) (Note 3) tsu (D) (Note 3) th (D) DATA IN STABLE DQ1~ 8 (4) MEASUREMENT CONDITIONS Limits1:Vcc=3.30.3V Input pulse level .............. V IH=2.4V,V IL=0.4V Input rise and fall time ..... 5ns Reference level ................ V OH=V OL=1.5V Output load ...................... Fig.1, CL=30pF CL=5pF (for ten,tdis) Transition is measured 500mV from steady state voltage. (for ten,tdis) DQ CL (Including scope and JIG) Fig.1 Output load Limits2:Vcc=5.00.5V Input pulse level .............. V IH=2.4V,V IL=0.6V Input rise and fall time ..... 5ns Reference level ................ V OH=V OL=1.5V Output load ...................... Fig.2, CL=100pF CL=5pF (for ten,tdis) Transition is measured 500mV from steady state voltage. (for ten,tdis) Vcc 1.8k DQ 990 CL (Including scope and JIG) Fig.2 Output load Note 3 4 5 6 7 : : : : : Hatching indicates the state is "don't care". Writing is executed in ov erlap of /S and /W low. If /W goes low simultaneously with or prior to /S, the outputs remain in the high impedance state. Don't apply inv erted phase signal externally when DQ pin is output mode. ten, tdis are periodically sampled and are not 100% tested. 6 RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM POWER DOWN CHARACTERISTICS (1) ELECTRICAL CHARACTERISTICS Symbol Vcc (PD) VI (/S) Parameter Test conditions Power down supply v oltage _ VCC(PD) 2.2V < _ VCC(PD) < _ 2.2V 2V< Chip select input /S (PD) Power down supply current _ Vcc -0.2V, Vcc = 3V, /S > Other inputs=0~Vcc V VCC(PD) ~40C ~70C ~85C -G,-GI 0.05 -XG -G,-GI Unit V 2.2 ~25C Icc Limits Typ Max Min 2 V 1 0.2 3 0.6 -XG -G,-GI A 10 2 20 -XG -GI (2) TIMING REQUIREMENTS Symbol tsu (PD) trec (PD) Parameter Test conditions Power down set up time Power down recov ery time Min Limits Typ Max Unit ns ns 0 tCR (3) POWER DOWN CHARACTERISTICS /S control mode Vcc tsu (PD) 3.0V 3.0V 2.2V 2.2V /S trec (PD) _ Vcc - 0.2V /S > 7 RENESAS LSIs M5M5256DFP,VP -70G,-70GI,-70XG 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM Nippon Bldg.,6-2,Otemachi 2-chome,Chiyoda-ku,Tokyo,100-0004 Japan Keep safety first in your circuit designs! * Renesas T echnology Corporation puts the m axim um effort int o m a k ing sem iconductor products better and more reliable, but there is always the possibility that trouble m ay occur with them . T r o u b le with sem iconductors m ay lead to personal injury, fire or property dam age.Rem ember to give due consideration to safety when m aking your circuit designs, with appropriate m easures such as (i) placem ent of substit u t ive, auxiliary circuits, (ii) use of nonflam m able m aterial or (iii) prevention against any m alfunction or mishap. Notes regarding these materials * T hese m aterials are intended as a reference to assist our custom ers in the selection of the Renesas T echnology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas T echnology Corporation or a third party. * Renesas T echnology Corporation assum es no responsibility for any dam age, or infringem ent of any third-party's rights, originat ing in the use of any product data, diagrams, charts, program s , a lgorit h m s , or circuit application exam ples contained in these m aterials . * A ll inf o r m a t ion contained in these m aterials , including product data, diagrams, charts, programs and algorithms represents inform ation on products at the tim e of publication of these m aterials, and are subject to change by Renesas T echnology Corporation without notice due to product im provem ents or other reasons. It is therefore recomm ended that custom ers contact Renesas T echnology Corporation or an authorized Renesas T echnology Corporation product distributor for the latest product inform ation before purchasing a product listed herein. T he inform ation described here m ay contain technical inaccuracies or typographical errors. Renesas T echnology Corporation assum es no responsibility for any dam age, liability, or other loss rising from t hese inaccuracies or errors. P lease also pay attention to inform ation published by Renesas T echnology Corporation by various m eans, including the Renesas T echnology Corporation S e m iconductor home page (http://www.renesas.com ). * When using any or all of the information contained in these m aterials , including product data, diagrams, charts, programs, and algorithm s , p lease be sure to evaluate all inform ation as a total system before m aking a final decision on the applicability of the inform ation and products. Renesas T echnology Corporation assum es no responsibility for any dam age, liability or other loss resulting from the inform ation contained herein. * Renesas T echnology Corporation sem iconductors are not designed or m anufactured for use in a device or system t hat is used under circumstances in which hum an life is potentially at stake. Please contact Renesas T echnology Corporation or an authorized Renesas T echnology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, m edical, aerospace, nuclear, or undersea repeater use. * T he prior written approval of Renesas T echnology Corporation is necessary to reprint or reproduce in whole or in part these m aterials . * If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from t he Japanese governm ent and cannot be im ported into a country other than the approved destinat ion. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destinat ion is prohibited. * P lease contact Renesas T echnology Corporation for further details on these m aterials or the products contained therein. REJ03C0054 (c) 2003 Renesas Technology Corp. New publication, effective Feb 2004. Specifications subject to change without notice