INSULATED TOOLS
Your Safety is our TOP PRIORITY!
2
Our history goes back more than 120 years. Bahco has
been developing and marketing professional tools for
use in a wide range the world over. Our core values of
performance products are well designed and available
globally, backed up with local expertise.
The full guarantee Bahco offers reach new scope and
depth of commitment with its safety tools, with a range
of more than 200 insulated tools, one of the widest and
most comprehensive range on the market.
Our tools are safe
All Bahco insulated tools are manufactured according
to International IEC60900 standards for working with
live systems up to 1000 V AC & 1500 V DC. They fol-
low strict quality controls and are subjected to the most
stringent tests.
Bahco insulated tools comply with the VDE0820 Stan-
dards and 63% of the assortment is certifi ed by the
German VDE laboratory.
The new Bahco 1000 V assortment is adapted to both
distributors and end users needs.
The
Bahco
Design
Safety
Guarantee
Outstanding
Ergonomics
Excellent
Performance
Broad
Comprehensive
Range
User-centered product •
development
The best ergonomics •
on the market
Accessibility•
Durability• Effectiveness•
IEC 60900• VDE Certifi cate• Multi-layer coating with •
different colours indica-
ting safety, danger or
high danger
216 references• One of the largest assortment •
on the market
Your safety is our
TOP PRIORITY!
Insulated tools from Bahco
3
*
IEC60900
Insulated tools from Bahco
Safety
GUARANTEE
Bahco tools all have a high level of technical performance. The materials used are of high quality and they have been carefully
chosen and tested in order to guarantee safety and durability. We are one of the few hand-tool manufacturers who make the
tools and the insulation in-house, both the PVC dipped insulated version (most of the tools) and the handle version (pliers,
screwdrivers).
Each tool is tested to 10000 V for a period of 10 seconds, thus guaranteeing safety during live work.
Penetration test
The insulating surface is pressed with a
special device. A voltage of 5000 V is then
applied to the tool for 3 minutes. The test is
considered successful.
Insulation adhesion test
The tools are conditioned at a temperature of
70° C for 168 h. A force of 50 N is applied in
the direction of the line dividing the insulating
material coating from the conductive part for
3 min. During this test the insulation material
must stay fi rmly attached to the basic tool.
Visual and dimensional
The tool (in particular the insulation) is visually
checked and should be free from external de-
fects. The marking should be perfectly legible
and the dimensions should be in accordance
with the standard.
Flame test
The test is considered as passed if the fl ame
height on the tool does not exceed 120 mm
and there is no leakage of insulated material
in fusion.
Permanent marking durability
The markings are rubbed for 15 s with a rag
soaked in water, and then for 15 s with a rag
soaked in isopropanol. After this process, the
marking should be legible.
Impact test
The tool is cooled at -25° C for two hours.
Afterwards, a special hammer applies force
on the insulating layer. The test is considered
successful if the insulating material shows no
breaks.
Dielectric test
The tools are immersed in water for 24 hours.
A voltage of 10kV is then continuously applied
for 3 mins. The test is considered successful
if no electrical puncture, spark over or fl asho-
ver occurs during the test period and if the li-
mits of leakage current are not exceeded.
Retaining force test
This test is applied only to tools which can
be assembled. The test consists of applying
a force of 50 N to try to separate both parts.
After a minute, both parts should stay assem-
bled.
Routine tests in accordance to IEC60900 specification
Red layer indicating safety.
Laser marked
totally indelible.
High performance and quality materials.
The fl ame does not spread.
Can perform between -20° C and +70° C. Black tip protects
against impact.
Yellow layer
indicating high danger.
Orange layer
indicating danger.
* 63% of Bahco insulated tools are Certifi ed by the German VDE laboratory
4
1000 V PLIERS
5
2101S-140 140 19.5 16 9 1.6 156
2101S-160 160 21.5 18 10 1.8 202
2101S-180 180 23.5 20 11 2.0 300
2101S-200 200 25.5 22 11 2.25 388
2191V-180 180 25 20 12 2.0 262
2191V-200 200 26 21 12 2.5 290
527V-160 160 27 7 24 1.6 270
527V-200 200 32 8 27 2.0 440
2171V-160 160 22 20 12 1.6 221
2171V-180 180 24 22 12 2.0 267
Side cutting pliers
• 1 component insulated handles up to 1000 volts
• Designed to cut hard material such as piano wire close to the joint and
to cut softer material such as copper wire and plastic insulated wire
at the tip
• Shaped jaws give improved accessibility in confi ned spaces
• Finish: Black oxidised, anti-corrosion treated
ISO: 5749, DIN: 5749
Product code L mm A mm B mm C mm Weight g
Wire types for cutting capacity
MMedium hard wire
Spring wire 1.61600 N/mm2
HHard wire
Piano wire
1.4
1.6
1.8
2
2100 - 2250 N/mm2
Soft wire
W
0.5
Cu - 230 N/mm2
WIRE TYPE TENSIBLE STRENGTH Ø mm
1
1.25
1.5
Bronze - 780 N/mm2
The variety between soft and piano depends on the tensile strength of the
wire which of course is related to the material properties (copper, brass,
iron, steel, etc). Then in each wire type we can fi nd a large variety of
thicknesses (diameters). More than the ones shown in this small chart.
End cutting pliers
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety. Orange: danger . Y ellow: high danger
• Cuts from 1.0 mm soft wire to 1.6 mm hard wire
• Chrome plated fi nish
ISO: 5748 DIN: 5748
Product code L mm A mm B mm C mm Weight g
Side cutting pliers dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Cuts from 0.5 mm soft wire to 1.6 mm hard wire
• Chrome plated fi nish
ISO: 5749, DIN: 5749
Product code L mm A mm B mm C mm Weight g
Heavy duty side cutting pliers
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger . Y ellow: high danger
• Cuts piano wire
• Chrome plated fi nish
ISO: 5749, DIN: 5749
Product code L mm A mm B mm C mm Weight g
1000 V Pliers
CUTTING EFFORT COMPARATIVE TEST
CUTTING EFFORT (N)
BAHCO
OTHERS
CUTS
Bahco cutting pliers enjoy better cutting capacity
to other pliers
6
2628 S-180 180 25 36 11 2.0 265
2628 S-200 200 27 39 12 2.5 310
2430 S-200 200 17 72 9 2.5 1.6 200
2678V-160 160 23 33 11 1.8 250
2678V-180 180 26 37 12 2.0 390
2678V-200 200 29 41 12 2.5 500
2430V-160 160 16 49 8 2.5 1.6 200
2430V-200 200 17 72 9 2.5 1.6 205
2427 S-200 200 17 70 9 2 1.6 200 2427V-200 200 17 70 9 2 1.6 205
1000 V Pliers
Combination pliers
• 1 component insulated handles up to 1000 volts
• Edges specially designed to cut hard material such as piano wire and
spring steel wire
• Gripping surfaces particularly suited for gripping round and fl at material
• Finish: Black oxidised, anti-corrosion treated
ISO: 5746 DIN: 5746
Product code L mm A mm B mm C mm Weight g Product code L mm A mm B mm C mm Weight g
Combination pliers dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in
black to further protect handle edges. Red: safety. Orange: danger.
Yellow: high danger
• Cuts from 1.0 mm soft wire to 1.6 mm hard wire
• Chrome plated fi nish
ISO: 5746 DIN: 5746
Snipe nose pliers
• 1 component insulated handles up to 1000 volts
• Slim, semi-circular shaped and serrated jaws
• Cutting capacity: 1.6 mm hard steel wire
• Accurately machined jaws providing a sure grip on the workpiece
• Sharp edges for cutting softer material such as copper wire and plastic
insulated wire
• Finish: Black oxidised, anti-corrosion treated
ISO: 5745 DIN: 5745
Product code L mm A mm B mm C mm E mm Weight g
Snipe nose pliers dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Cutting capacity from 1.0 mm soft wire to 1.6 mm hard wire
• Chrome plated fi nish
ISO: 5745 DIN: 5745
Product code L mm A mm B mm C mm E mm Weight g
Snipe nose pliers bent tip 60°
• 1 component insulated handles up to 1000 volts
• Tips angled at 60°
• Cutting capacity: 1.6 mm hard steel wire
• Slim, semi-circular shaped and serrated jaws
• Accurately machined jaws providing a sure grip on the workpiece
• Sharp edges for cutting softer material such as copper wire and
plastic insulated wire
• Finish: Black oxidised, anti-corrosion treated
ISO: 5745 DIN: 5745
Product code L mm A mm B mm C mm E mm Weight g Product code L mm A mm B mm C mm E mm Weight g
Snipe nose pliers bent tip 60°
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in
black to further protect handle edges. Red: safety. Orange: danger.
Yellow: high danger
• Tips angled at 60°
• Cutting capacity from 1.0 mm soft wire to 1.6 mm hard wire
• Chrome plated fi nish
ISO: 5745 DIN: 5745
7
2223 S-150 167 15 46 8 0.5-5 0.05-10 170
2521V-160 160 16 42 7 1.5 205
2421V-160 160 16.5 49 8.5 3 5 205
2619V-250 250 35 33 8 450
2619V-300 300 43 44 8 770
2223V-160 160 15 46 8 0.5-5 0.05-10 205
6224V 250 32 35 11 450
Flat nose pliers dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger . Yellow: high danger
• Good grip and improved accessibility in confi ned spaces
• Chrome plated fi nish
ISO: 5745 DIN: 5745
Product code L mm A mm B mm C mm D mm Weight gE mm
Round nose pliers dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety. Orange: danger . Y ellow: high danger
• Suited for wire-bending work
• Chrome plated fi nish
ISO: 5745 DIN: 5745
Product code L mm A mm B mm C mm E mm Weight g
1000 V Pliers
Wire stripping pliers
• 1 component insulated handles up to 1000 volts
• Maximum cable diameter 5 mm; Maximum cable section 10 mm2
• Finish: Black oxidised, anti-corrosion treated
Product code L mm A mm B mm C mm Cable Ø Area Weight g
Wire stripping pliers dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger . Yellow: high danger
• Maximum cable diameter 5 mm; Maximum cable section 10 mm2
• Chrome plated fi nish
Product code L mm A m m B m m C m m Cable Ø Area Weight g
Slip joint pliers “box joint”
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Both fl at and pipe grip jaws; Self locking jaws grip tightly at 3 points
• Finish: Black oxidised, anti-corrosion treated
ISO 8976
Product code L mm A mm B mm C mm Weight g
Slip joint pliers “groove joint”
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Both fl at and pipe grip jaws; Self locking jaws grip tightly at 3 points
• Chrome plated fi nish
ISO 8976
Product code L mm A mm B mm C mm Weight g
8
2806-35V 255 35 800
2806-52V 340 52 900
2520 S 552 30 2200
2820VBC 630 9 8 7 3100
2250V-170 170 29 16 10 320
2250V-230 230 38 21 12 560
2260V-210 210 30 34 11 375
1000 V Pliers
Ratchet action cable cutter
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger . Yellow: high danger
• One hand operation; effortless cutting. Easy release movable jaw
• For cutting copper and aluminium cables
• Not suitable for hard copper, steel cables, or internal steel wire cables
• Clean and smooth cut without distortion
Cutting capacity table
Multiple copper
wire cables
Sectioned copper
wire cables
Copper cables with
fl exible material
Multiple Aluminium
wire cables
Sectioned
Aluminium wire
2806-35v
Ø35
Max. area
240 mm2
Max. area
240 mm2
Max. outside
Ø35
Max. outside
Ø35
Max. outside
Ø35
2806-52v
Ø52
Max. area
400 mm2
Max. area
400 mm2
Max. outside
Ø52
Max. outside
Ø52
Max. outside
Ø52
Cable cutter for copper & aluminium
• 1 component insulated handles up to 1000 volts
• Cable cutter to cut Aluminium/Copper cables with or without
messenger wire
Recommended maximum capacity: Al-Cu diameter of 30 mm with
a messenger wire (1800 N/mm2) of 6 mm
WARNING: FOR A MAXIMUM SERVICE LIFE, THE SHARPENED
PARTS OF THE BLADES MUST NEVER BE USED ON FERROUS MA-
TERIAL. FOR THIS PURPOSE, USE THE NOTCHES ON THE BLADES
Product code L mm Weight gmm
Cable cutter dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Not suitable for hard copper or steel cables, or internal steel wire cables
Size mm
170
230
Maximum
opening mm
15
22
14
20
14
20
Ext. Ø
Al - Cu
Product code L mm A mm B mm C mm Weight g
Product code L mm A mm Weight g
Cable cutter for copper & aluminium
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety. Orange: danger. Yellow: high danger
• Not suitable for hard copper or steel cables, or internal steel wire cables
• Finish: Black oxidised, anti-corrosion treated
Size mm
210
Maximum
opening mm
25 18 18
Ext. Ø
Al - Cu
Product code L mm A mm B mm C mm Weight g Product code L mm Weight g
Bolt cutter dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety. Orange: danger. Yellow: high danger
• Forged head; Induction hardened cutting edges
• Long arms with lever-action head, which allows to cut hard wires with
very low efforts
80kg/mm2120kg/mm2160kg/mm2
Wire types Ø mm
9
1000 V SCREWDRIVERS
10
BE-8800S 0 60 16x102 162 19
BE-8810S 1 80 20x122 202 60
BE-8820S 2 100 27x122 222 100
BE-8830S 3 150 36x122 272 175
BE-8840S 4 200 36x161 361 222
BE-8600S 0 75 16x102 162 20
BE-8610S 1 80 20x122 202 60
BE-8620S 2 100 27x122 222 100
BE-8630S 3 150 36x122 272 175
BE-8640S 4 200 36x161 361 240
BE-8010S 0.4 2.5 75 16x102 177 18
BE-8220S 0.5 3.0 100 16x102 202 25
BE-8230S 0.6 3.5 100 20x122 222 30
BE-8040S 0.8 4.0 100 20x122 222 40
BE-8050S 1.0 5.5 125 27x122 247 70
BE-8255S 1.2 6.5 150 36x122 272 124
BE-8065S 1.2 8.0 175 36x122 297 195
BE-8725S 2.5 75 16x102 177 22
BE-8703S 3 75 20x122 197 25
BE-8704S 4 75 20x122 197 41
BE-8705S 5 75 27x122 197 65
BE-8706S 6 100 27x122 222 97
BE-8708S 8 100 36x122 222 178
The design of ergonomic tools wi-
thin Bahco is based on a scientifi cally
recognised 11-point programme. This
programme covers facts and expe-
riences gathered from users, ergono-
mists, industrial designers, research
and development departments as well
as extensive testing and trials together
with end-users of our tools. This me-
thod is unique within the tool industry
and to ensure that you can always see
which tools have been developed ac-
cording to this programme, each one
is marked with the Ergo™ symbol.
Colour coded handles
showing tip type for
quick application
identifi cation.
Slotted tips
Phillips® tips
Pozidriv® tips
Torx® tips
Hexagonal
Socket tips
1000 V Ergo™ Screwdrivers
Product code Weight g
Insulated screwdrivers ErgoTM
Insulated screwdrivers ErgoTM slotted
IEC 60900, EN 60900, DIN-EN 60900, VDE 0682 part 201.
• Ergonomically developed 3-component handle of polypropylene and
thermoplastic elastomere.
• Colour coded handles showing tip type for quick application
identifi cation.
• Black oxide tips, entirely hardened made of Molybdenum-Vanadium steel
Insulated screwdriver for slotted head screws, for work on live equipment
up to 1000 volts
DIN 7437. Tip DIN 5264-A, ISO 2380-1-A
mm mm mm mmmm
Insulated screwdrivers ErgoTM Phillips®
Insulated screwdriver for Phillips® PH-head screws, for work on live
equipment up to 1000 volts
DIN 7438. Tip DIN ISO 8764-1, ISO 8764-1
BE-8640S with two handed grip
Product code Weight g
mm mmmm
Insulated screwdrivers ErgoTM Pozidriv®
Screwdriver for Pozidriv® PZ head screws, for work on live equipment up
to 1000 volts
DIN 7438. Tip DIN ISO 8764-1, ISO 8764-1
BE-8840S with two handed grip
Product code Weight g
mm mmmm
Product code Weight g
Insulated screwdrivers ErgoTM hexagon
socket-head screws
Insulated screwdriver for hexagon socket-head screws, for work on live
equipment up to 1000 volts
DIN 7439. Tip DIN ISO 2936
mm mmmm
11
BE-9881S 0.5x3x100 PH1x80 450
0.8x4x100 PH2x100
1x5.5x125
BE-9882S 0.5x3x100 PZ1x80 450
0.8x4x100 PZ2x100
1x5.5x125
BE-9888S 0.4x2.5x75 PZ0x60 530
0.5x3.0x100 PZ2x100
0.8x4.0x100 PZ3x150
1.0x5.5x125
BE-8910S T10 2.74 65 20x122 187 34
BE-8915S T15 3.27 70 20x122 192 35
BE-8920S T20 3.86 80 27x122 202 55
BE-8925S T25 4.43 80 27x122 202 61
BE-8930S T30 5.52 100 36x122 222 96
BE-8510S 5 / PH1 80 20x122 202 60
BE-8520S 6 / PH2 100 27x122 222 100
BE-9885S 5 / PH1 5 / PZ1
370
6 / PH2 6 / PZ2
V
BE-8710S 5 / PZ1 80 20x122 202 60
BE-8720S 6 / PZ2 100 27x122 222 100
Product code Weight g
Insulated screwdrivers ErgoTM
Torx® head screws
Insulated screwdriver for Torx® head screws, for work on live equipment
up to 1000 volts
mm mmmm
D
Insulated screwdrivers ErgoTM
combi tips
Insulated screwdrivers ErgoTM combi tips
Phillips® / slotted
IEC 60900, EN 60900, DIN-EN 60900, VDE 0682 part 201
• Combi (mixed) tips: slotted and PH / slotted and PZ
• For use on electric racks and terminals
• More powerful tightening and minimizes come-out effect
• New insulated blade for live use in live systems up to 1000 V AC and
1500 V DC (low voltage)
• Handle: 3-injection handle with tip colour coding
Product code Weight g
mm mmmm
Insulated screwdrivers ErgoTM combi tips
Pozidriv® / slotted
Product code W eight g
mm mmmm
Product code Weight g
Insulated screwdrivers
sets ErgoTM
PZ
PH
Insulated screwdrivers set ErgoTM
combi tips
• Combi (mixed) tips: slotted and PH / slotted and PZ
• For use in electric racks and terminals
• More powerful tightening and minimizes come-out effect
• New Insulated blade for live use in live systems up to 1000 V AC and
1500 V DC (low voltage)
• Handle: 3-injection handle with tip colour coding
• Includes a voltage tester 806-1-1
Product code Includes Weight g
V oltage tester 806-1-1
1000 V Ergo™ Screwdrivers
Sets of insulated screwdrivers for work on live equipment up to 1000 volts
Standards slotted: DIN 7437. Tip DIN 5264-A, ISO 2380-1-A
Standards Phillips® / Pozidriv®: DIN 7438. Tip DIN ISO 8764-1, ISO 8764-1
12
813VDE-3-100 0.5 3.0 100 27x90 190 40
813VDE-3,5-100 0.6 3.5 100 27x90 190 40
813VDE-4-100 0.8 4.0 100 27x90 190 40
813VDE-5,5-125 1.0 5.5 125 30x100 225 60
813VDE-6,5-150 1.2 6.5 150 33x110 260 90
813VDE-8-175 1.2 8.0 175 36x120 295 110
813VDE-10-200 1.6 10.0 200 36x120 320 175
813VDE-12-200 2.0 12.0 200 36x120 320 205
816VDE-0-100 0 100 27x90 190 40
816VDE-1-150 1 150 33x110 260 75
816VDE-2-175 2 175 33x110 285 105
816VDE-3-200 3 200 36x120 320 175
815VDE-0-100 0 100 27x90 190 40
815VDE-1-150 1 150 33x110 260 75
815VDE-2-175 2 175 33x110 285 110
815VDE-3-200 3 200 36x120 320 175
815VDE-4-200 4 200 36x120 320 200
820VDE-5 0.6x3.5x100 PZ1x150 360
0.8x4x100 PZ2x175
1.2x6.5x150
822VDE-5 0.5x3.0x100 PH1x150 360
0.8x4x100 PH2x175
1.0x5.5x125
817V-6 6 120 30x100 220 85
817V-7 7 120 33x110 230 120
817V-8 8 120 33x110 230 120
817V-10 10 120 36x120 240 145
817V-13 13 120 36x120 240 170
1000 V 800 Series Screwdrivers
Insulated screwdrivers
800 Series
• 2-Component handle made of polypropylene and thermoplastic
elastomere
• Blade of Molybdenum-Vanadium steel, entirely hardened
IEC 60900, DIN-EN 60900, EN 60900, VDE 0682 part 201
Insulated screwdrivers
800 Series Phillips®
Insulated screwdriver for Phillips® PH-head screws, for work on live
equipment up to 1000 volts
Tip DIN ISO 8764-1, ISO 8764-1
Insulated screwdrivers
800 Series slotted
Insulated screwdriver for slotted head screws for work on live equipment
up to 1000 volts
DIN 7437. Tip DIN 5264-A, ISO 2380-1-A
Product code Weight g
mm mm mm mmmm
Insulated screwdrivers
800 Series Pozidriv®
Insulated screwdriver for Pozidriv® PZ head screws for work on live
equipment up to 1000 volts
Tip DIN ISO 8764-1, ISO 8764-1
Product code Weight g
mm mmmm
Product code Weight g
mm mmmm
Insulated nut drivers
800 Series
Insulated nutdriver for work on live equipment up to 1000 volts
Hexagon opening tolerance DIN ISO 691, ISO 691
Product code Weight g
mm mmmm
Product code Weight g
Insulated screwdrivers sets 800 Series
Insulated screwdrivers for work on live equipment up to 1000 volts
IEC 60900, DIN-EN 60900, EN 60900, VDE 0682 part 201
PZPH
13
623-3-100 0.5 3.0 100 80 180 32
623-3.5-100 0.6 3.5 100 80 180 32
623-4-100 0.8 4.0 100 80 180 33
623-5.5-125 1.0 5.5 125 97 223 61
623-6.5-150 1.2 6.5 150 100 250 94
620-6 0.5x3.0x100 PH1x150 472
0.8x4.0x100 PH2x175
1.0x5.5x125
1.2x6.5x150
625-0-100 0 100 80 180 32
625-1-150 1 150 97 247 68
625-2-175 2 175 110 285 116
Product code Weight g
mm mm mm mmmm
Insulated screwdrivers
600 Series
• Insulated blade for live use in live systems up to 1000 V AC and 1500 V
DC (low voltage)
• Professional quality at a highly competitve price
• Voluminous 2 component handle giving an effective transmission of the
allied tightening torque
• Molybdenum-Vanadium steel
IEC Insulated screwdrivers
600 Series slotted 623
Insulated screwdriver for slotted head screws for work on live equipment
up to 1000 volts
DIN 7437. Tip DIN 5264-A, ISO 2380-1-A
IEC Insulated screwdrivers
600 Series Phillips® 625
Insulated screwdriver for Phillips® PH-head screws, for work on live
equipment up to 1000 volts
Tip DIN ISO 8764-1, ISO 8764-1
Product code Weight g
mm mmmm
IEC insulated screwdriver
600 Series 6 pcs set
• Insulated screwdrivers for slotted and Phillips® head screws, for work
on live equipment up to 1000 volts
• Blister pack
Product code Weight g
PH
1000 V 600 Series Screwdrivers
14
1000 V SPANNERS, SOCKETS & WRENCHES
15
6MV-6 6 92 15.0 3.7 2 25
6MV-7 7 92 17.5 3.7 2 30
6MV-8 8 92 18.0 4.0 2 40
6MV-9 9 98 21.0 4.0 2 45
6MV-10 10 108 24.0 5.0 2 55
6MV-11 11 116 26.0 5.0 2 60
6MV-12 12 125 28.0 5.5 2 70
6MV-13 13 135 31.0 5.5 2 75
6MV-14 14 140 31.0 6.0 2 85
6MV-15 15 150 33.0 6.0 2 90
6MV-16 16 157 34.0 6.5 2 105
6MV-17 17 162 37.0 6.5 3 120
6MV-18 18 170 39.0 7.0 3 145
6MV-19 19 175 42.0 7.0 3 150
6MV-20 20 180 43.0 7.5 3 170
6MV-21 21 184 46.0 7.5 3 190
6MV-22 22 193 47.0 7.5 3 190
6MV-23 23 203 49.0 8.0 3 220
6MV-24 24 210 51.0 8.5 3 275
6MV-27 27 225 59.0 9.5 3 370
6MV-30 30 240 63.0 10.0 3 470
6MV-32 32 250 68.0 10.0 3 530
2MV-6 6 140 5.0 10.5 18 50
2MV-7 7 145 6.0 12.0 18 55
2MV-8 8 150 6.0 13.0 19 70
2MV-9 9 155 6.5 14.5 19 75
2MV-10 10 160 7.0 16.0 21 80
2MV-11 11 170 7.5 18.0 21 90
2MV-12 12 180 8.0 18.5 23 100
2MV-13 13 180 8.5 20.5 23 105
2MV-14 14 190 8.5 22.0 24 130
2MV-15 15 195 9.5 24.0 24 140
2MV-16 16 200 9.5 24.5 26 150
2MV-17 17 205 10.0 26.5 26 160
2MV-18 18 215 10.5 27.0 28 210
2MV-19 19 225 11.0 29.0 28 230
2MV-21 21 235 12.0 32.0 30 280
2MV-22 22 245 12.0 33.0 30 300
2MV-23 23 255 13.0 35.0 30 320
2MV-24 24 265 13.0 35.0 32 350
8071VLT 205 29 22 360
8072VLT 255 34 25 690
8073VLT 305 39 29 1060
8070V 165 20 21.0 5.5 12.0 175
8071V 210 24 26.0 7.5 13.5 370
8072V 260 29 29.5 9.0 16.0 540
8073V 310 36 36.0 11.0 19.0 820
8074V 390 43 45.0 14.0 21.0 1400
Open-end spanner
dipped insulation
• 2 layers of insulation coating with different colours plus a 3rd one in black to further
protect handle edges on spanners from 6 mm to 16 mm. Red: safety . Y ellow: danger
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges on spanners from 17 mm to 32 mm. Red: safety
Orange: danger. Yellow: high danger
• Material: Chrome-Vanadium steel
Opening tolerance according to ISO 691
Product code Weight g
Layers
coating
L mm A mm B mm
mm
Offset ring spanner
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: Safety . Orange: Danger. Yellow: High Danger
• Material: Chrome-V anadium steel
• 12 point Dynamic-Drive Profi le
Opening tolerance according to ISO 691
Product code Weight g
L mm A mm B mm C mm
mm
1000 V Spanners, sockets & wrenches
Adjustable wrench
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in
black to further protect handle edges. Red: Safety. Orange: Danger.
Yellow: High Danger
• Material: Chrome-Vanadium steel
• The moveable jaw slides easily by smoothly operating the thumb screw
Complies with ISO and ANSI torque requirements, Head dimensions
comply with ISO 6787 standards
Product code Weight gA mm B mm D mm E mmL mm
Adjustable wrench
fully dipped insulation
• 3 layers of insulation coating on the complete wrench with different
colours plus a 4th one in black to further protect handle edges.
Red: Safety. Orange: Danger. Yellow: High Danger
• Chrome-Vanadium steel
• The moveable jaw slides easily by smoothly operating the side screw
Exceed ISO and ANSI torque requirements
Product code Weight gA mm
L mm C mm
16
28MV-8 8 200 8 29 16.5 130 101
28MV-9 9 200 8 30 18.0 130 143
28MV-10 10 200 9 33 19.5 130 150
28MV-11 11 200 10 36 20.5 130 159
28MV-12 12 200 11 42 22.0 140 216
28MV-13 13 200 12 42 23.0 140 260
28MV-14 14 200 12 45 24.5 140 272
28MV-15 15 200 13 47 25.5 140 312
28MV-16 16 200 13 52 27.0 140 322
28MV-17 17 200 14 52 28.0 140 331
28MV-18 18 200 15 55 29.5 140 421
28MV-19 19 200 17 58 30.5 140 435
28MV-20 20 200 18 61 32.5 140 515
28MV-21 21 200 18 62 33.0 140 531
28MV-22 22 200 19 65 34.5 140 579
8150-1/2V 270 77 50 12.5 735
8154-1/2V 200 190 520
7800DMV-8 8 17.0 22 8 50 80
7800DMV-10 10 19.5 22 8 50 82
7800DMV-11 11 20.5 22 8 50 84
7800DMV-12 12 22.0 22 8 50 86
7800DMV-13 13 23.2 22 8 50 88
7800DMV-14 14 24.5 22 10 50 90
7800DMV-15 15 25.5 22 10 50 92
7800DMV-16 16 27.0 22 10 50 95
7800DMV-17 17 28.2 22 10 50 98
7800DMV-18 18 29.5 22 12 50 105
7800DMV-19 19 30.5 22 12 50 115
7800DMV-20 20 32.0 22 12 50 125
7800DMV-21 21 33.2 22 12 50 135
7800DMV-22 22 34.5 22 14 52 140
7800DMV-24 24 37.0 22 16 52 155
7800DMV-27 27 40.5 22 18 54 195
7800DMV-30 30 44.5 22 20 56 210
7800DMV-32 32 47.0 22 22 58 225
T-handle socket wrench
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Material: Chrome-Vanadium steel
• 6 point Dynamic-Drive Profi le
Opening tolerance according to ISO 691
Product code Weight g
L mm A mm B mm C mm M mm
mm
1000 V Spanners, sockets & wrenches
1/2” socket
dipped insulation
• 2 layers of insulation coating with different colours. Red: safety. Yellow: danger
• Material: Chrome-Vanadium steel
• 12 point Dynamic-Drive Profi le
Both square and 12 point openings according to the tolerance and torque
requirements given in ISO standards
Product code Weight g
A mm B mm C mm L mm
mm
1/2” ratchet
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Material: Chrome-Vanadium steel
• One of the buttons is a lever to change the ratcheting direction; the other
is a push button to lock or release the socket to the male square drive
• 28 teeth ratchet to operate at a 13
°
angle
Complies with the ISO standards. Static and endurance tests with 50000 cycles
Product code Weight gA mmL mm B mm C mm
1/2” T-handle
dipped insulation
• 2 layers of insulation coating with different colours plus a 3rd one in
black to further protect handle edges. Red: safety. Yellow: danger
• Material: Chrome-Vanadium steel
• The male square drive has a slotted screw to move the ball
outwards or inwards and block or unblock the socket to it
The male square tolerances and torque requirements comply with the
respective ISO standard
Product code Weight g
A mmL mm
17
8160-1/2V 125 220
8162-1/2V 250 410
2820V13 210 7x9x11x13 420
2820V17 210 8x10x13x17 420
1999MV-3 3 8 118 78 25
1999MV-4 4 8 118 78 35
1999MV-5 5 8 117 78 50
1999MV-6 6 10 117 87 75
1999MV-7 7 10 116 91 100
1999MV-8 8 10 116 100 145
1999MV-9 9 12 115 100 170
1999MV-10 10 12 115 110 210
1999MV-12 12 12 114 124 300
1/2” extension
dipped insulation
• 2 layers of insulation coating with different colours. Red: safety . Yellow: danger
• Material: Chrome-Vanadium steel
• The male square drive has a slotted screw to move the ball
outwards or inwards and block or unblock the socket to it
The male square tolerances and torque requirements comply with the
respective ISO standard
Product code Weight g
L mm
Cross wrench
dipped insulation
• 2 layers of insulation coating with different colours Red: safety . Yellow: danger
• Material: Chrome-Vanadium steel
• 6 point openings with standard profi le
Opening tolerance according to ISO 691
Product code Weight g
L mm
mm
Hexagon key
dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety. Orange: danger . Y ellow: high danger
• Material: Chrome-Vanadium steel
Hex dimensions and torque requirements comply with those given in ISO
standards
Product code Weight g
A mm L1 mm L2 mmmm
Safety instructions for working with live system
Always • transport your insulated tools carefully to avoid damage.
Examine• each tool for damage before every use. If the insulation is
damaged, the tools should not be used.
Keep• all tools in good condition with regular maintenance. The insu-
lated tools should be kept clean and dry.
Protective glasses• should be worn when working with cutting
pliers or working overhead.
Safety requires that • work space is kept clean, dry and tidy to pre-
vent accidents when working with live voltage.
Use the right tool correctly• : Every tool was designed to do a
certain job. Always use it for its intended purpose and use the right
tool size.
Always wear the proper • personal protective equipment requi-
red for the job. Protect your eyes, hands, ears and other body parts.
Make sure that • loose and cut-off parts of cables do not fall
onto live components.
1000 V Spanners, sockets & wrenches
18
1000 V
OTHER TOOLS & PROTECTIVE EQUIPMENT
19
2820HSV1 300 70 450 1100
2820VHELP 38 20 180 70
2820HSV2 300 70 450 1360
2820VP 50 22 180 130
2820VPC 50 23 180 170
SC127V 130 50 100 SC150NGV 150 38 170
Product code Weight g
Hacksaw frame
dipped insulation
• Insulated hacksaw with 3906-300-18 Sandfl ex® bi-metal blade
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Supplied with the reliable and shatterproof Sandfl ex® bi-metal blade
18TPI with excellent cutting performance and wear resistance
B mm L mmA mm Product code Weight g
Hacksaw frame with
screen handguard dipped insulation
• Insulated hacksaw with 3906-300-18 Sandfl ex® bi-metal blade
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• Handguard for ultimate protection
• Supplied with the reliable and shatterproof Sandfl ex® bi-metal blade
18TPI with excellent cutting performance and wear resistance
B mm L mmA mm
1000 V Other tools & protective equipment
The Sandflex® blade - The best
just got better
Stronger, thicker, steadier and cuts faster than any other
hacksaw blades!
The virtually unbreakable and shatterproof bi-metal blade with
precision ground teeth for all kinds of metal sawing. With a blade back
of strong, fl exible spring steel and a tooth line in high-alloyed super
high speed steel, this blade is guaranteed to stay sharp for a long time.
The Sandfl ex® blade combines, extreme cutting performance and wear
resistance, with a high degree of fl exibility and is vastly superior to all-
hard high speed blades or conventional, fl exible blades.
Knife with guide
• Insulated 1000 V knife with guide
• Single layer, injection moulded, with protection cap, printed with 1000 V
• Special blade with cable guard shoe for cable dismantling
• Stainless steel blade; handle shock resistant plastic
Product code Weight gB mm L mmA mm
Electrician scissors 130 mm
• Single layer coating (only red coating)
• Small groove in the blade for stripping cables
• 50 mm cutting length
• Finger guard
Product code Weight gA mmL mm
Electrician scissors 150 mm
• 2 layer coating: Red: safety. Yellow: danger
• Finger guard
• The longer handle allows to apply less force to cut a certain wire
• 35 mm cutting length
Product code Weight gA mmL mm
Product code Weight gB mm L mmA mm
Electrician knife dipped insulation
• 3 layers of insulation coating with different colours plus a 4th one in black to
further protect handle edges. Red: safety . Orange: danger. Yellow: high danger
• A vailable in straight and curved blade versions
20
2820VTEE 150 50
2820VGCOT 30
2820VG05 500 V 10 0.5 mm 235
2820VG10 1000 V 10 1.0 mm 240
2820VFP 458 2820VM 1000 1000 5500
1000 V Other tools & protective equipment
Tweezers dipped insulation
Product code Weight gL mm
Protective equipment
Insulated gloves
• 2820VG05 for use up to 500 V AC and 750 V DC
• 2820VG10 for use up to 1000 V AC and 1500 V DC
• Made of special natural latex for better fi t
• Offers protection against electric arcs according to CENELEC ENV
50354 class 2 and IEC 61482-1
• Cold resistance -40° C; Hot resistance 90° C
Product code Weight g
Power Supply
Volt Material
thickness
Size
Cotton gloves
• Light, fl exible and comfortable under glove
• The high-quality cotton liner and the good fi t offer a very good wearing
comfort
• Cotton Gloves to wear under any type of glove, for the absorption of
sweat and for increased comfort
THIS ITEM IS NOT INSULATED AND HAS T O BE USED WITH INSULATED GLOVES
Product code Weight gSize
NH FUSES
Ears where the puller holds the fuse
Protection with locking
and unlocking
button in the inside
Puller with locking mechanism
Insulated 1000 V fuse puller
• A kind of glove to hold NH fuses. Sizes 00-3
• It is operated from the inside of the red protection by a locking and
unlocking system
• With antislide protection and unlocking button
Product code Weight g
Insulated 1000 V mat
• Valid for use up to 5000 V AC
• To stand on it and avoid earth connection when operating live systems
Complies with EN10204-3.1
Product code Weight gW mmL mm
One size
21
1000 V TOOL CASES AND SETS
22
7811DMV 7800DMV 10, 11, 13, 17, 19, 20, 22
8150-1/2V 270 mm
8154-1/2V 200 mm
8160-1/2V 125 mm
813VDE-5,5-125 1.0x5.5x125
3045V-1 2171V-160 160 mm
2678V-180 180 mm
2223V-150 160 mm
BE-8220S
BE-8040S
BE-8050S
0.5x3.0x100
0.8x4.0x100
1.0x5.5x125
BE-8610S
BE-8620S PH1X80
PH2X100
2820VP 180 mm
SC127V 130 mm
Insulated tools set 11 pcs
• For work on electrical installations
• Shock resistant plastic case
• Contains standard Bahco Insulated tools
• L mm: 320x300x100 / Weight g: 2800
Product code Contents Description Lenght / size
Insulated tools set 10 pcs
• For work on electrical installations
• A compact resistant case with a basic assortment of 1000 V tools
• L mm: 330x240x60 / Weight g: 2000
Product code Contents Description Lenght / size
1000 V Tool cases and sets
Side cutting pliers dipped insulation
Combination pliers dipped insulation
Wire stripping pliers dipped insulation
Screwdriver Ergo™ slotted
Screwdriver Ergo™ Phillips®
Insulated knife straight blade
Electrician scissors
Insulated socket 1/2”
Insulated ratchet 1/2”, 270 mm
Insulated T-handle 1/2”
Insulated extension 1/2”
Screwdriver VDE slotted
23
6MV/8T 6MV 10, 11, 12, 13, 14, 17, 18, 19
3045V-2 2171V-160 160 mm
2678V-180 180 mm
2430V-160 160 mm
2223V-150 160 mm
BE-8220S
BE-8040S
BE-8050S
BE-8255S
0.5x3.0x100
0.8x4.0x100
1.0x5.5x125
1.2x6.5x150
BE-8610S
BE-8620S PH1x80
PH2x100
6MV 10, 11, 12, 13, 14, 17, 19
2820VP 180 mm
SC150NGV 150 mm
Insulated tools set 19 pcs
• For work on electrical installations
• A resistant leather briefcase with metallic reinforcements
• Contains standard Bahco Insulated tools
• L mm: 430x260x160 / Weight g: 5500
Product code Contents Description Lenght / size
Open end spanner set
• For work on electrical installations
• 8 pieces set in plastic rollup
• Weight g: 880
Product code Contents Description Lenght / size
1000 V Tool cases and sets
Side cutting pliers dipped insulation
Combination pliers dipped insulation
Snipe nose pliers dipped insulation
Wire stripping pliers dipped insulation
Screwdriver Ergo™ slotted
Screwdriver Ergo™ Phillips®
Safety open end spanner dipped insulation
Insulated knife straight blade
Electrician scissors
Safety open end spanner
24
IND-0490-INT
