Part Number 856517 153.6 MHz SAW Filter Data Sheet Features * * * * * * * * Usable bandwidth 32 MHz High attenuation Impedance matching required Single-ended operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 13.3 x 6.50 x 1.50 mm Bottom View 1 2 3 4 5 10 9 8 7 6 1.50 NOM. 1.65 MAX. 0.64 13.3 1.91 1.80 R0.51 6.50 2.31 1.02 Pin No. 10 5 1,2,3, 4 6,7,8, 9 Description Input Output Case ground Case ground Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev A 02-Aug-2006 Page 1 of 5 Part Number 856517 153.6 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +80 oC Parameter (3) Minimum Typical Maximum Unit 169.6 153.6 13 136.1 171.1 15 137.6 - MHz dB MHz MHz 40 35 40 30 52 55 45 40 - dB dB dB dB - 0.7 1.2 dB p-p - 5 12 deg - 1 2.5 deg - 0.7 0.8 s - 50 100 ns 8 10 - dB 9 - 11 50 - dB Center Frequency Insertion Loss at Fc 1 dB Lower Frequency (4) 1 dB Upper Frequency (4) Stopband Attenuation (4) 70 - 125 MHz 275 - 350 MHz 400 - 1000 MHz 1000 - 2000 MHz Amplitude Variation (5) 137.6 - 169.6 MHz Phase Ripple (p-p) 136.6 - 169.6 MHz Phase Ripple (RMS) 137.6 - 169.6 MHz Absolute Group Delay at 153.6 MHz 137.6 - 169.6 MHz Group Delay Variation 137.6 - 169.6 MHz Input Return Loss (6) 137.6 - 169.6 MHz Output Return Loss (6) 137.6 - 169.6 MHz Source/Load Impedance (7) Notes: 1. 2. 3. 4. 5. 6. 7. All specifications are based on the test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances Referenced to insertion loss at Fc. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency points. An external impedance matching network with +/- 2% tolerance will be necessary to achieve proposed return loss. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 56nH 50 Single-ended Input 50 2.2k 68nH Subject to change or obsolescence without notice 5 10 1,2,3,4 6,7,8,9 2.2k 39nH 33nH Rev A 50 02-Aug-2006 50 Single-ended Output Page 2 of 5 Part Number 856517 153.6 MHz SAW Filter Data Sheet Typical Performance (at +25oC) Subject to change or obsolescence without notice Rev A 02-Aug-2006 Page 3 of 5 Part Number 856517 153.6 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 56nH 50 Single-ended Input 2.2k 68nH 50 5 10 39nH 2.2k 1,2,3,4 6,7,8,9 Marking 50 Single-ended Output 50 33nH PCB Footprint 8.86 SAWTEK 856517 XXXXXX ID Dot 2.51 6.70 Date Code 1.22 2.00 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) .69 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 24.8 2.7 O330 0.3 4.0 2.0 O1.5 A 1.75 11.5 13.9 O102 24 Direction of travel O20.2 O13.0 2.0 2.3 Section A-A 7.1 12.0 O1.5 A Dimensions shown are nominal in millimeters Packaging quantity:2000 units/reel Subject to change or obsolescence without notice Rev A 02-Aug-2006 Page 4 of 5 Part Number 856517 153.6 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +80 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JEDEC J-STD-020C Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Or contact one of our worldwide Network of sales offices, Representatives or distributors Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: custservice@tqs.com Web: www.triquint.com Rev A 02-Aug-2006 Page 5 of 5