Series AM1/4L-NZ
1/4 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 051e R8.M 1 of 3 North America only
FEATURES:
Models
Single output
Model
Input Voltage
(V)
Output Voltage
(V)
Output Current max
(mA)
Isolation
(VDC)
Efficiency
(%)
AM1/4L-1205S-NZ
5
50
1000
65
AM1/4L-0505SH30-NZ
5
50
3000
64
AM1/4L-1205SH30-NZ *
5
50
3000
66
AM1/4L-1212SH30-NZ
12
20
3000
67
Models
Dual output
Model
Input Voltage
(V)
Output Voltage
(V)
Output Current max
(mA)
Isolation
(VDC)
Efficiency
(%)
AM1/4L-0505DH30-NZ **
4.5-5.5
±5
±25
3000
64
NOTE: Add suffix “TR” to a part number when ordering in tape and reel package.
* For new designs, please see new generation model AM1/4LS-1205SH30-NZ; model AM1/4L-1205SH30-NZ will be discontinued by
December 31st, 2017 (EOL date).
** For new designs, please see new generation model AM1LS-0505DH30-NZ; model AM1/4L-0505DH30-NZ will be discontinued by
December 31st, 2017 (EOL date).
Input Specifications
Parameters
Nominal
Typical
Maximum
Units
Voltage range
5
4.5-5.5
VDC
12
10.8-13.2
Filter
Capacitor
Isolation Specifications
Parameters
Conditions
Typical
Rated
Units
Tested I/O voltage
60 sec
1000 & 3000
VDC
Resistance
> 1000
MOhm
Capacitance
60
pF
Output Specifications
Parameters
Conditions
Typical
Maximum
Units
Voltage accuracy
See the tolerance graph
±5
%
Voltage balance
Dual Output
±2
%
Line voltage regulation
For 1% change of Vin
±1.2
%
Load voltage regulation
Load 10 – 100%
10
%
Temperature coefficient
±0.03
%/oC
Ripple & Noise
At 20MHz Bandwidth
75
mV p-p
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100% load single
100
KHz
100% load dual
150
KHz
Short circuit protection
Momentary (1sec)
Operating temperature
Without derating
-40 to +85
oC
• RoHS Compliant
• Operating temperature -40oC to + 85oC
• SMD Package
• Input/Output Isolation 1000 and 3000VDC
• Low ripple and noise
• Pin compatible with multiple manufacturers
• High efficiency up to 68%
• UL94-VO Package
Click on Series name for product info on aimtec.com
Series AM1/4L-NZ
1/4 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 051e R8.M 2 of 3 North America only
Storage temperature
-55 to +125
oC
Cooling
Free air convection
Humidity
95
%
Case material
Plastic UL94-VO
Weight
1.5
g
Dimensions (L x W x H)
Single 1000VDC
0.50 x 0.44 x 0.26 inch 12.70 x 11.20 x 6.70 mm
Single and Dual 3000 VDC
0.60 x 0.44 x 0.26 inch 15.24 x 11.20 x 6.70 mm
MTBF
>3 500 000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC)
Max Case Temperature
95
oC
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified
Pin Out Specifications Pin Out Specifications
Single 1000VDC Single and Dual 3000VDC
Typical characteristics
Pin
Single
Dual
1
- V Input
- V Input
2
+ V Input
+ V Input
3
N.C.
N.C.
5
-V Output
Common
6
N.C.
-V Output
7
N.C.
N.C.
8
+V Output
+V Output
10
N.C.
N.C.
11
N.C.
N.C.
12
N.C.
N.C.
Pin
Single
1
- V Input
2
+ V Input
3
N.C.
4
- V Output
5
+ V Output
6
N.C.
7
N.C.
8
N.C.
Typical Load Line
Tolerance Envelope Graph
Output Current (%)
Output Voltage
+2.5%
-2.5%
-7.5%
+
+ 5%
10%50%100%
Nominal
Voltage
10%
Series AM1/4L-NZ
1/4 Watt | DC-DC Converter
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 051e R8.M 3 of 3 North America only
Dimensions Single 1000VDC
Dimensions single and dual 3000VDC
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
A
0.30
(0.01)
1.50
(0.06)
0.50
(0.02)
5.00º angle
A
7.50
(0.30)
7.00
(0.28)
6.70
(0.26)
Top View
Front View
Side View
6.25
(0.25)
1.85
(0.07)
12.70
(0.50)
0.50
(0.02)
2.54
(0.10)
1
7.62
(0.30)
11.20
(0.44)
6.00
(0.24)
4.13
(0.16)
0.25
(0.01)
All dimensions are in mm (inch)
All Pins are on a 2.54mm (0.10inch) pitch
with tolerance of ±0.25mm (0.01inch)
A
0.30
(0.01)
1.50
(0.06)
0.50
(0.02)
5.00º angle
A
7.50
(0.30)
7.00
(0.28)
6.70
(0.26)
Top View
Front View
Side View
6.25
(0.25)
1.85
(0.07)
15.24
(0.60)
0.50
(0.02)
2.54
(0.10)
1
11.20
(0.44)
6.00
(0.24)
4.13
(0.16)
0.25
(0.01)
All dimensions are in mm (inch)
All Pins are on a 2.54mm (0.10inch) pitch
with tolerance of ±0.25mm (0.01inch)