150 Watts, 100 Flanged Resistors Model RFP-150-100RCGF Flanged Resistors General Specifications Resistive Element: Substrate: Cover: Mounting Flange: Thick film Beryllium oxide ceramic Alumina ceramic Copper, nickel plated per QQ-N-290 99.99% pure silver (.005" thk) Lead(s): Features Electrical Specifications * DC - 2.0 GHz Resistance Value: Frequency Range: Power: Capacitance: * 150 Watts * BeO Ceramic * Welded Silver Leads 100 ohms, 5% DC - 2.0 GHz 150 Watts 3.5 pF Notes: Tolerance is .010, unless otherwise specified. Operating temperature is -55C to +150C (see chart). Designed to meet or exceed applicable portions of MIL-E-5400. All dimensions are in inches. Lead length 0.15" minimum. Specifications subject to change without notice. * Non-Nichrome Resistive Element * 100% Tested Outline Drawing .130 MAX. .100 RFP 150-100 RCGF .155 .435 .870 .560 .250 .161 DIA. THRU. (2 PLACES) .120 .375 .188 .062 VER. 12/5/01 Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 1 Flanged Resistors Model RFP-150-100RCGF Typical Performance Suggested Mounting Procedures Power Derating .025 MIN. (2 PLACES) % OF RATED POWER 100 BOARD LOWER THAN LEAD. 75 BOARD EVEN WITH LEAD. SUGGESTED STRESS RELIEF METHODS SCALE: 50 BOARD LOWER THAN LEAD. BOARD HIGHER THAN LEAD. NOT RECOMMENDED APPLICATION SCALE: 1. Make sure that the devices are mounted on flat surfaces (.001" under the device) to optimize the heat transfer. 25 0 25 50 75 100 CASE TEMPERATURE -- C 125 150 2. Drill & tap the heatsink for the appropriate thread size to be used. 3. Coat heatsink with a minimum amount of high quality silicone grease (.001" max. thickness). 4. Position device on mounting surface and secure using socket head screws, flat & split washers. Torque screws to the appropriate value. Make sure that the device is flat against the heatsink. (Care should be taken to avoid upward pressure of the leads towards the lid). 5. Solder leads in place using an SN63 type solder with a controlled temperature iron (210C). 2 Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 Anaren Product RFP-150H100RCGF Model RFP-150H100RCGF * * * * 0 - 2000 MHz * Beryllium Oxide (BeO) Ceramic Substrate * * Low Capacitance * Welded Silver Leads Resistors 150 Watts 100% Tested Extended Operating Temperature Range Non-Nichrome Thick Film Resistive Element Frequency Resistor Power Handling Resistor Value MHz Watts Ohms/dB 0 - 2000 150 100 Resistor Tolerance Capacitance Operating Temperature %/dB pF deg C 5.00 3.50 -55 - 250 Material (Substrate) BeO Specifications are subject to change without notice. Details... * * * * * DCS PCS * * Xinger(R) In-Phase Power Dividers Power Dividers AMPS GSM Wilkinson Networks Copyright 2001, Anaren Microwave, Inc. http://www.anaren.com/products/product_detail.cfm?prod=877 [Sep-21-2002 5:11:32 PM] * Need a customized part or assembly? * * Want a sample? Want a quote?