https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page1/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
MCR temperature transducer for Pt100 temperature sensors, configured via DIP switch, with screw connection,
not pre-configured
Product Description
The narrow 6.2mm MINI MCR-SL-PT100-UI... is a configurable, 3-way isolated temperature transducer. It is suitable for connecting Pt 100 resistance
temperature detectors in accordance with IEC 60751 in 2-, 3-, and 4-conductor connection technology.
Electrically isolated 0...20mA, 4...20mA, 0...10V, 0...5V, 1...5V, 10...0V, 20...0mA or 20...4mA standard analog signals are available on
the output side.
The DIP switches, which can be accessed on the side of the housing, are used to configure the following parameters:
-Connection technology
-Temperature range to be measured
-Output signal
-Type of error evaluation
Power (19.2VDC to 30VDC) can either be supplied via the connection terminal blocks of the modules or in conjunction with the DIN rail connector.
Your advantages
Power supply possible via the foot element (TBUS)
For 2-, 3-, 4-conductor Pt 100 sensors in accordance with IEC 60751
Error indication via diagnostic LED and analog signal
Input and output signals can be configured via DIP switches
Highly-compact temperature transducer for electrical isolation, conversion, amplification, and filtering of
3-way isolation
Pt 100 signals to create standard signals
Temperature measuring range of -150°C to +850°C
Key Commercial Data
Packing unit 1 pc
GTIN
https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page2/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
GTIN 4017918956561
Weight per Piece (excluding packing) 85.000 g
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 6.2 mm
Height 93.1 mm
Depth 101.2 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 65 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection IP20
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Input data
Configurable/programmable Yes
Sensor types (RTD) that can be used Pt 100 (IEC 60751/EN 60751)
Sensor input current 1 mA (constant)
Connection technology 2-, 3-, 4-conductor
Output data
Number of outputs 1
Configurable/programmable Yes, unconfigured
Voltage output signal 0 V ... 10 V
10 V ... 0 V
0 V ... 5 V
1 V ... 5 V
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Max. output voltage approx. 12.5 V
Max. output current 23 mA
https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page3/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
Technical data
Output data
Short-circuit current approx. 10 mA
Load/output load voltage output ≥ 10 kΩ
Load/output load current output < 500 Ω (at 20 mA)
Ripple < 20 mVPP (at 10 kΩ)
< 20 mVPP (at 500 Ω)
Power supply
Nominal supply voltage 24 VDC
Supply voltage range
19.2 VDC ... 30 VDC (The DIN rail bus connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply
voltage. It can be snapped onto a 35 mm DIN rail according to EN60715))
Max. current consumption < 21 mA (at 24 V DC)
Power consumption < 500 mW
Connection data
Connection method Screw connection
Stripping length 12 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 12
General
No. of channels 1
Transmission error in the set measuring range ((100 K / set measurement range [K]) + 0.1)%
Transmission error in the full measuring range ≤ 0,2 %
Maximum temperature coefficient < 0.02 %/K
Protective circuit Transient protection
Electrical isolation Basic insulation according to EN 61010
Overvoltage category II
Degree of pollution 2
Rated insulation voltage 50 V AC/DC
Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Color green
https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page4/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
Technical data
General
Housing material PBT
Mounting position any
Assembly instructions The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
EMC data
Designation Electromagnetic RF field
Standards/regulations EN61000-4-3
Typical deviation from the measuring range final value 10 %
Designation Fast transients (burst)
Standards/regulations EN61000-4-4
Typical deviation from the measuring range final value 10 %
Designation Conducted interferences
Standards/regulations EN61000-4-6
Typical deviation from the measuring range final value 10 %
Standards and Regulations
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Connection in acc. with standard CUL
Standards/regulations EN 61000-4-2
Designation Electromagnetic RF field
Standards/regulations EN61000-4-3
EN61000-4-4
EN61000-4-5
Designation Conducted interferences
Standards/regulations EN61000-4-6
Electrical isolation Basic insulation according to EN 61010
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5
GL GL EMC 2 D
Conformance/approvals
https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page5/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
Technical data
Conformance/approvals
Designation CE
Identification CE-compliant
Designation UL, USA/Canada
Identification UL508 Recognized
Class I, Div. 2, Groups A, B, C, D T5
Designation Shipbuilding approval
Certificate DNV GL TAA00002R0
Temperature B
Humidity B
Vibration B
EMC A
Enclosure Required protection according to the Rules shall be provided upon
installation on board
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Block diagram
IN
Sensor/Field
OUT
PLC/DCS
–
–
+
+
+24V
+24V
GND2
GND2
active
GND1
OUTU,I
1 5
26
7
8
3
4
5
6
1
2
3
4
ϑϑϑ
PT100
Zone2
Div.2
passive
Dimensional drawing
93,1 6,2
102,5
Classifications
eCl@ss
eCl@ss 10.0.1 27210129
https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page6/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
Classifications
eCl@ss
eCl@ss 11.0 27210129
eCl@ss 4.0 27200200
eCl@ss 4.1 27200200
eCl@ss 5.0 27200200
eCl@ss 5.1 27200200
eCl@ss 6.0 27200200
eCl@ss 7.0 27200206
eCl@ss 8.0 27200206
eCl@ss 9.0 27210129
ETIM
ETIM 2.0 EC001446
ETIM 3.0 EC001446
ETIM 4.0 EC001446
ETIM 5.0 EC001446
ETIM 6.0 EC002919
ETIM 7.0 EC002919
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 41112105
UNSPSC 18.0 41112105
UNSPSC 19.0 41112105
UNSPSC 20.0 41112105
UNSPSC 21.0 41112105
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / DNV GL / cULus Recognized
https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page7/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
Approvals
Ex Approvals
ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed
Approval details
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
DNV GL https://approvalfinder.dnvgl.com/ TAA00002R0
cULus Recognized
Accessories
Accessories
DIN rail connector
DIN rail bus connectors-ME 6,2 TBUS-2 1,5/5-ST-3,81 GN-2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Marking material
https://www.phoenixcontact.com/us/products/2864273
12/15/2020Page8/8
Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UI-
NC-2864273
Accessories
Transparent cover-MINI MCR DKL-2308111
Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker
strip 6.2 mm
Marking label-MINI MCR-DKL-LABEL-2810272
Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL
Power module
Power terminal block-MINI MCR-SL-PTB-2864134
MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection,
maximum current consumption of up to 2A
Power supply
Power supply unit-MINI-SYS-PS-100-240AC/24DC/1.5-2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com