2-1462032-6 - TE CONNECTIVITY

FP2 Relay

The Best Relaytion

2 pole telecom / signal relay

Through Hole Type (THT)

Polarized.

Relay types: non-latching with1 coil

latching with 1 coil

latching with 2 coils

Features

– Telecom / signal relay (dry circuit, test access, ringing)

– Slim line 14 x 9 mm, 0.550 x 0.354 inch

– Switching current 2 A

– 2 changeover contacts (2 form C / DPDT)

– Bifurcated contacts

– High sensitivity results in low nominal power consumption

80 mW for high sensitive, 140 mW for sensitive version

– High mechanical shock resistance

up to 300 G functional

up to 1500 G survival

Typical applications

– Communications equipment

Linecard application - analog, ISDN, xDSL, PABX

Voice over IP

– Office and business equipment

– Measurement and control equipment

– Consumer electronics

Set top boxes, HiFi

– Medical equipment

FP2 Relay

UL 508 File No. E111441

QC 160503-CH0001

CECC 61811-53-001

FP2 Relay

Dimensions

THT Version

Basic grid 2.54 mm

Mounting hole layout

View onto the component side of the PCB

(top view)

Terminal assignment

Relay - top view

Non-latching type,

not energized condition

latching, 2 coils

reset condition

THT

mm inch

L 14.02 ± 0.08 0.574 ± 0.008

W 9.02 ± 0.08 0.035 ± 0.003

H 5 ± 0.1 0.196 ± 0.004

T 3.2 + 0.3 0.125 + 0.011

T1 N/A N/A

T2 7.62 ±0.1 0.3 ± 0.004

Tw 0.5 0.020

S 0.25+0.05 0.009+0.002

Latching type,

reset condition

3 2.1 6.8 0.30 140 64 D 3006

4.5 3.15 10.3 0.45 140 145 D 3004

5 3.5 11.4 0.50 140 178 D 3009

6 4.2 13.7 0.60 140 257 D 3005

9 6.3 20.4 0.90 140 574 D 3010

12 8.4 27.3 1.20 140 1028 D 3002

24 16.8 45.7 2.40 200 2880 D 3012

48 33.6 67.5 4.80 300 7680 D 3013

non-latching

1 coil

Coil Data (values at 23°C)

Nominal Operate/set voltage range Release/ Nominal power Resistance Relay Code

voltage reset voltage consumption

Unom Minimum Maximum Minimum

voltage UI voltage UII

Vdc Vdc Vdc Vdc mW W / ± 10 %

FP2 Relay

Further coil versions are available on request.

latching

1 coil

3 2.25 8.1 2.25 100 90 D 3041

4.5 3.375 12.1 3.375 100 203 D 3042

5 3.75 13.5 3.75 100 250 D 3043

6 4.5 16.2 4.50 100 360 D 3044

9 6.75 24.2 6.75 100 810 D 3045

12 9.00 29.0 9.00 100 1440 D 3046

24 18.00 47.5 18.00 150 3840 D 3047

3 2.25 9.0 0.3 80 113 D 3021

4.5 3.38 13.5 0.45 80 253 D 3022

5 3.75 15.0 0.5 80 313 D 3023

6 4.5 18.0 0.6 80 450 D 3024

9 6.75 27.1 0.9 80 1013 D 3025

12 9.00 36.1 1.2 80 1800 D 3026

24 18.00 54.7 2.4 140 4114 D 3027

48 36.00 72.5 4.8 260 8882 D 3028

non-latching 1 coil

high sensitive version

3 2.1 5.7 2.1 200 45 D 3061

4.5 3.15 8.6 3.15 200 101 D 3062

5 3.5 9.5 3.5 200 125 D 3063

6 4.2 11.4 4.2 200 180 D 3064

9 6.3 17.1 6.3 200 405 D 3065

12 8.4 22.6 8.4 200 720 D 3066

24 16.8 33.7 16.8 200 1920 D 3067

latching

2 coils

Ambient temperature tamb [°C]

FP2 Relay

Insulation

Insulation resistance at 500 VDC

Dielectric test voltage (1 min)

between coil and contacts

between adjacent contact sets

between open contacts

Surge voltage resistance

according IEC (10 / 700 ms)

between coil and contacts

between adjacent contact sets

between open contacts

according to FCC 68 (10 / 160 ms)

between coil and contacts

between adjacent contact sets

between open contacts

> 109 W

1000 Vrms

750 Vrms

1500 V

Contact Data

Number of contacts and type

Contact assembly

Contact material

Limiting continuous current at max. ambient temperature

Maximum switching current

Maximum swichting voltage

Maximum switching capacity

Thermoelectric potential

Minimum switching voltage

Initial contact resistance / measuring condition: 10 mA / 20 mV

Electrical endurance at contact application 0 (³30 mV/ ³10 mA)

at cable load open end

at 125 Vdc / 0.24 A - 30 W

at 250 Vac / 0.25 A - 62.5 VA

at 24 V / 1.25 A - 30 W

Mechanical endurance

UL contact ratings

2 changeover contacts

Bifurcated contacts

Silver-nickel, gold-covered

2 A

220 Vdc

250 Vac

60 W, 62.5 VA

< 10 mV

100 mV

< 50 mW

min. 2.5 x 106 operations

min. 2.0 x 106 operations

min. 1.0 x 105 operations

min. 3.0 x 105 operations

typ. 108 operations

220 Vdc / 0.24 A - 60 W

125 Vdc / 0.24 A - 30 W

250 Vac / 0.25 A - 62.5 VA

125 Vac / 0.5 A - 62.5 VA

30 Vdc / 2 A - 60 W

UI = Minimum voltage at 23° C after pre-energizing

with nominal voltage without contact current

UII = Maximum continous voltage at 23°

The operating voltage limits UI and UII depend on

the temperature according to the formula:

UI tamb = KI · UI 23° C

and

UII tamb = KIl · UIl 23° C

tamb = Ambient temperature

UI tamb = Minimum voltage at ambient temperature, tamb

UII tamb = Maximum voltage at ambient temperature, tamb

kI, kII = Factors (dependent on temperature), see diagram

FP2 Relay

Tube for THT version - 50 relays per stick, 1000 relays per box

Packing

Capacitance

between coil and contacts

between adjacent contact sets

between open contacts

RF Characteristics

Isolation at 100 / 900 MHz

Insertion loss at 100 / 900 MHz

V.S.W.R. at 100 / 900 MHz

max. 4 pF

max. 1 pF

-40.2 dB / -22.3 dB

-0.03 dB / -0.25 dB

1.01 / 1.07

High Frequency Data

General data

Operate time at Unom typ. / max.

Reset time (latching) at Unom , typ. / max.

Release time without diode in parallel (non-latching), typ. / max.

Release time with diode in parallel (non-latching), typ. / max.

Bounce time at closing contact, typ. / max.

Maximum switching rate without load

Ambient temperature

Thermal resistance

Maximum permissible coil temperature

Vibration resistance (function)

Shock resistance, half sinus, 11 ms

Degree of protection / Environmental protection

Needle flame test

Mounting position

Processing information

Weight (mass)

Resistance to soldering heat

3 ms / 4 ms

1 ms / 3 ms

3 ms / 4 ms

1 ms / 5 ms

50 operations/s

-55° C ... +85° C

< 165 K/W

110° C

20 G

10 to 500 Hz

50 G (function)

1500 G (damage)

immersion cleanable, IP 67 / RT III

application time 20 s, no burning or glowing

any

Ultrasonic cleaning is not recommended

max. 2 g

260° C / 10 s

All data refers to 23° C unless otherwise specified.

FP2 Relay

D3002 0-1462033-5

D3004 0-1462033-9

D3005 1-1462033-1

D3006 1-1462033-3

D3009 1-1462033-4

D3010 2-1462033-1

D3012 2-1462033-2

D3013 2-1462033-6

D3021 3-1462033-2

D3022 3-1462033-3

D3023 3-1462033-4

D3024 3-1462033-5

D3025 3-1462033-6

D3026 3-1462033-7

D3027 3-1462033-8

D3028 3-1462033-9

D3041 4-1462033-0

D3042 4-1462033-1

D3043 4-1462033-2

D3044 4-1462033-3

D3045 4-1462033-4

D3046 4-1462033-5

D3047 4-1462033-6

D3061 4-1462033-7

D3062 4-1462033-8

D3063 4-1462033-9

D3064 5-1462033-0

D3065 5-1462033-1

D3066 5-1462033-4

D3067 5-1462033-6

Relay Code Tyco

Part Number

Relay Code Tyco

Part Number

Ordering Information

FP2 Relay

IM Relays

4th generation slim line – low profile polarized 2 c/o telecom relay with

bifurcated contacts, available as non latching or latching relay with

1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption

of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay

is available as through hole and surface mount type (J-Legs and Gull

Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric

strength fulfills the Bellcore requirements according GR 1089 (2,5 kV

– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is

CECC/IECQ approved and certified in accordance with IEC/EN 60950

and UL1950. Dimensions approx. 10 x 6 mm board space and

5.65 mm height.

P2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal

voltage range from 3 ... 24 V, coil power consumption 140 mW,

latching relays with 1 coil 70 mW. The P2 Relay is available as through

hole or surface mount type and capable to switch currents up to 5

A. Dielectric strength fulfills the Bellcore requirements according GR

1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).

Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

FX Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 coil. Nominal voltage

range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the

high sensitive version, 140... 300 mW for the standard version, latching

relays with 1 coil 100 mW. The FX2 relay is available as through hole

type and capable to switch loads up to 60 W/62,5 VA. Dielectric

strength fulfills the Bellcore requirements according GR 1089 (2,5 kV

– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/

IECQ approved and certified in accordance with IEC/EN 60950 and

UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm

height.

FT2 / FU2 Relays

3rd generation non polarized, non latching 2 c/o telecom relay with

bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power

consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as

through hole and surface mount type. Dielectric strength fulfills the

Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC

part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved

and certified in accordance with IEC/EN 60950 and UL1950.

Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

FP1 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,

available as non latching or latching relay with 1 or 2 coils. Nominal

voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW

for the high sensitive version, 140... 300 mW for the standard version,

latching relays with 1 coil 100 mW.. The FP1 Relay is available as

through hole type and capable to switch loads up to

30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /

160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.

14 x 9 mm board space and 5 mm height.

MT2 / MT4

2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and

signal relay with bifurcated contacts. Nominal voltage range from 4.5 ...

48 V, coil power consumption 150/200/300/400 and

550 mW, and 300 mW (MT4). Dielectric strength fulfills the

requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both

and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)

the MT4 only.

Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,

MT4 approx. 20 x15 mm board space and 11 mm height.

D2n Relays

2nd generation non polarized 2 c/o relay for telecom and various

other applications. Nominal voltage range from 3 ... 48 V, coil power

consumption from 150 .... 500 mW. The D2n relay is capable to

switch currents up to 3 A. Dielectric strength fulfills the requirements

according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.

20 x10 mm board space and 11,5 mm height.

P1 Relays

Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for

a wide range of applications, available as non latching or latching relay

with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power

consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay

is available as through hole or surface mount type and capable to

switch currents up to 1 A. Dielectric strength fulfills the requirements

according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.

13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for

SMT version.

W11 Relays

Low cost, non polarized 1 c/o relay for various applications. Nominal

voltage range from 3 ... 24 V, coil power consumption 450 mW,

sensitive versions 200 mW. The W11 relay is capable to switch

currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.

15,6 x 10,6 mm board space and 11,5 mm height.

Reed Relays

High sensitive, non polarized relay for telecom and various other

applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal

voltage range from 5 ... 24 V, coil power consumption 50...280 mW

for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays

are available in DIP or SIL housing and capable to switch currents up to

0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric

strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and

5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm

height for SIL version.

Cradle Relays

Extremely reliable and mature relay family of 1st generation for various

signal switching applications. Available as non polarized, polarized

/ latching and relay with AC coil. The benefit is the possibility of

combining various contact sets from 1 up to 6 poles, single and

bifurcated contacts, different contact materials with a coil voltage

range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust

protected and hermetically sealed versions, with plug in or solder

terminals and are capable to switch currents up to 5 A. Forcibly

guided (linked) contact sets optional. Dielectric strength 500 Vrms.

Dimensions from approx. 19 x 24 to 19x35 mm board space and

30 mm height.

Other Relays

We offer a variety of different relay families for maintenance and

replacement purposes. These relays are up to 60 years old now, such

as Card Relay SN (V23030 / V23031 series), Small General Purpose

Relay (V23006 series), Small Polarized Relay (V23063 ... V23067

and V23163 ... V23167 series). Accessories like sockets, hold down

springs, etc. optional.

HF3 Relay

High performance low cost RF relay with excellent RF characteristics.

Available with an impedance of 50 and 75 Ohm. Suitable for frequen-

cies up to 3 GHz. Actually smallest RF relay available combining small

size, excellent RF performance and SMD solderability. Available as non

latching or latching relay with 1 or 2 coils and a nominal coil voltage

range from 3 ... 24 V, coil power consumption 140 mW, latching relays

with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.

Tyco Electronics AXICOM Ltd.

Seestrasse 295 - P.O. Box 220

CH-8804 Au-Wädenswil / Switzerland

Phone +41 1 782 9111

Fax +41 1 782 9080

E-mail: axicom@tycoelectronics.com

Tyco Electronics Corporation

POB 3608,

Harrisburg, PA 17105, USA

Phone +1 800-522-6752

Tyco Electronics EC Trutnov s.r.o.

Komenského 821

CZ-541 01 Trutnov / Czech Republic

E-mail: axicom@tycoelectronics.com

Tyco Electronics AMP GmbH

Paulsternstrasse 26

D-13629 Berlin / Germany

Phone +49 30 386 38260

Fax +49 30 386 38569

E-mail: axicom@tycoelectronics.com

February 2003 Rev. 2.06