62
08.11
WIMA FKP 4
D
Polypropylene (PP) Capacitors for Pulse Applications with
Metal Foil Electrodes, Schoopage Contacts and Self-Healing, Internal
Series Connection for Increased Current Carrying Capability
PCM 15 mm to 37.5 mm
Special Features Electrical Data
˜ High pulse duty
˜ Self-healing
˜ Internal series connection
˜ Very low dissipation factor
˜ Negative capacitance change
versus temperature
˜ According to RoHS 2002/95/EC
Typical Applications
For high pulse and high frequency
applications e.g.
˜ Switch mode power supplies
˜ Converter in drives and power
electronics
˜ Deflection systems in monitors
and TV-sets
˜ Electronic ballasts
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Aluminium foil and single-sided metallized
plastic film
Internal construction:
Plastic film
Metal foil electrode
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Termination
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Black.
Capacitance range:
100 pF to 1.5 mF (E12-values on request)
Rated voltages:
400 VDC, 630 VDC, 1000 VDC, 1250 VDC,
1600 VDC, 2000 VDC
Capacitance tolerances:
±20%, ±10%, ±5% (other tolerances are
available subject to special enquiry)
Operating temperature range:
–55+ C to +100+ C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20+ C:
C T 0.1 mF: 1 x 105 M¸
(mean value: 5 x 105 M¸)
C 0.1 mF: 10 000 sec (M¸ x mF)
(mean value: 100 000 sec)
Measuring voltage: 100 V/1 min.
Dissipation factors at +20+ C: tan d
at f CT0.1 mF 0.1 mF P C T 1.0 mF C1.0 mF
1 kHz T 3 x 10-4 T 3 x 10-4 T 3 x 10-4
10 kHz T 4 x 10-4 T 6 x 10-4 –
100 kHz T 10 x 10-4 – –
Maximum pulse rise time:
Capacitance max. pulse rise time V/msec at TA < 40) C
pF/mF 400 VDC 630 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC
100 ... 220 27000 31000 33000 39000 39000 39000
330 ... 680 19000 21000 31000 34000 34000 39000
1000 ... 2200 13000 15000 27000 27000 27000 39000
3300 ... 6800 9000 14000 15000 17000 17000 21000
0.01 ... 0.022 7000 11000 11000 11000 11000 11000
0.033 ... 0.068 7000 9000 9000 9000 9000 9000
0.1 ... 0.22 7000 9000 9000 9000 9000 9000
0.33 ... 0.68 3000 5000 5000 5000 5000 –
1.0 ... 1.5 1000 1600 2000 – – –
for pulses equal to the rated voltage
Test voltage: 2 Ur, 2 sec.
Dielectric absorption:
0.05 %
Voltage derating:
A voltage derating factor of 1.35 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages.
Reliability:
Operational life 300 000 hours
Failure rate P 1 fit (0.5 x Ur and 40+ C)
Mechanical Tests
Pull test on pins:
d T 0.8 l: 10 N in direction of pins
d > 0.8 l: 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2
in accordance with IEC 60068-2-29
Packing
Available taped and reeled up to and
including case size 15 x 26 x 31.5 /
PCM 27.5 mm.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
63
08.11
Continuation
General Data
WIMA FKP 4
D
Capacitance 400 VDC/250 VAC* 630 VDC/350 VAC*
W H L PCM** Part number W H L PCM** Part number
100 pF 5 11 18 15 FKP4G001004B00_ _ _ _ 5 11 18 15 FKP4J001004B00_ _ _ _
150 „ 5 11 18 15 FKP4G001504B00_ _ _ _ 5 11 18 15 FKP4J001504B00_ _ _ _
220 „ 5 11 18 15 FKP4G002204B00_ _ _ _ 5 11 18 15 FKP4J002204B00_ _ _ _
330 „ 5 11 18 15 FKP4G003304B00_ _ _ _ 5 11 18 15 FKP4J003304B00_ _ _ _
470 „ 5 11 18 15 FKP4G004704B00_ _ _ _ 5 11 18 15 FKP4J004704B00_ _ _ _
680 „ 5 11 18 15 FKP4G006804B00_ _ _ _ 5 11 18 15 FKP4J006804B00_ _ _ _
1000 pF 5 11 18 15 FKP4G011004B00_ _ _ _ 5 11 18 15 FKP4J011004B00_ _ _ _
1500 „ 5 11 18 15 FKP4G011504B00_ _ _ _ 5 11 18 15 FKP4J011504B00_ _ _ _
2200 „ 5 11 18 15 FKP4G012204B00_ _ _ _ 5 11 18 15 FKP4J012204B00_ _ _ _
3300 „ 5 11 18 15 FKP4G013304B00_ _ _ _ 5 11 18 15 FKP4J013304B00_ _ _ _
4700 „ 5 11 18 15 FKP4G014704B00_ _ _ _ 5 11 18 15 FKP4J014704B00_ _ _ _
6800 „ 5 11 18 15 FKP4G016804B00_ _ _ _ 5 11 18 15 FKP4J016804B00_ _ _ _
0.01 mF 5 11 18 15 FKP4G021004B00_ _ _ _ 5 11 18 15 FKP4J021004B00_ _ _ _
0.015 „ 5 11 18 15 FKP4G021504B00_ _ _ _ 6 12.5 18 15 FKP4J021504C00_ _ _ _
0.022 „ 6 12.5 18 15 FKP4G022204C00_ _ _ _ 7 14 18 15 FKP4J022204D00_ _ _ _
0.033 „ 7 14 18 15 FKP4G023304D00_ _ _ _ 8 15 18 15 FKP4J023304F00_ _ _ _
5 14 26.5 22.5 FKP4G023305A00_ _ _ _ 6 15 26.5 22.5 FKP4J023305B00_ _ _ _
0.047 „ 8 15 18 15 FKP4G024704F00_ _ _ _ 9 16 18 15 FKP4J024704J00_ _ _ _
6 15 26.5 22.5 FKP4G024705B00_ _ _ _ 7 16.5 26.5 22.5 FKP4J024705D00_ _ _ _
0.068 „ 7 16.5 26.5 22.5 FKP4G026805D00_ _ _ _ 8.5 18.5 26.5 22.5 FKP4J026805F00_ _ _ _
0.1 mF 8.5 18.5 26.5 22.5 FKP4G031005F00_ _ _ _ 10.5 19 26.5 22.5 FKP4J031005G00_ _ _ _
11 21 31.5 27.5 FKP4J031006B00_ _ _ _
0.15 „ 11 21 26.5 22.5 FKP4G031505I00_ _ _ _ 11 21 26.5 22.5 FKP4J031505I00_ _ _ _
9 19 31.5 27.5 FKP4G031506A00_ _ _ _ 11 21 31.5 27.5 FKP4J031506B00_ _ _ _
0.22 „ 11 21 31.5 27.5 FKP4G032206B00_ _ _ _ 13 24 31.5 27.5 FKP4J032206D00_ _ _ _
0.33 „ 13 24 31.5 27.5 FKP4G033306D00_ _ _ _ 15 26 31.5 27.5 FKP4J033306F00_ _ _ _
0.47 „ 17 29 31.5 27.5 FKP4G034706G00_ _ _ _ 17 34.5 31.5 27.5 FKP4J034706I00_ _ _ _
0.68 „ 17 34.5 31.5 27.5 FKP4G036806I00_ _ _ _ 20 39.5 41.5 37.5 FKP4J036807G00_ _ _ _
1.0 mF 20 39.5 31.5 27.5 FKP4G041006J00_ _ _ _ 20 39.5 41.5 37.5 FKP4J041007G00_ _ _ _
1.5 „ 20 39.5 41.5 37.5 FKP4G041507G00_ _ _ _ 24 45.5 41.5 37.5 FKP4J041507H00_ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x Urms + UDC T Ur
** PCM = Printed circuit module = pin spacing
Dims. in mm.
Ionisation inception level in isolated cases may
be lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
l d PCM
0.8 15 - 27.5
1.0 37.5
PCM
at the pin exit
points
( 0.4)±
LW
H
d
6 -2
Continuation page 64
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
64
08.11
WIMA FKP 4
Continuation
General Data
D
Capacitance 1000 VDC/400 VAC* 1250 VDC/450 VAC*
W H L PCM** Part number W H L PCM** Part number
100 pF 5 11 18 15 FKP4O101004B00_ _ _ _ 5 11 18 15 FKP4R001004B00_ _ _ _
150 „ 5 11 18 15 FKP4O101504B00_ _ _ _ 5 11 18 15 FKP4R001504B00_ _ _ _
220 „ 5 11 18 15 FKP4O102204B00_ _ _ _ 5 11 18 15 FKP4R002204B00_ _ _ _
330 „ 5 11 18 15 FKP4O103304B00_ _ _ _ 5 11 18 15 FKP4R003304B00_ _ _ _
470 „ 5 11 18 15 FKP4O104704B00_ _ _ _ 5 11 18 15 FKP4R004704B00_ _ _ _
680 „ 5 11 18 15 FKP4O106804B00_ _ _ _ 5 11 18 15 FKP4R001684B00_ _ _ _
1000 pF 5 11 18 15 FKP4O111004B00_ _ _ _ 5 11 18 15 FKP4R011004B00_ _ _ _
1500 „ 5 11 18 15 FKP4O111504B00_ _ _ _ 5 11 18 15 FKP4R011504B00_ _ _ _
2200 „ 5 11 18 15 FKP4O112204B00_ _ _ _ 5 11 18 15 FKP4R012204B00_ _ _ _
3300 „ 5 11 18 15 FKP4O113304B00_ _ _ _ 6 12.5 18 15 FKP4R013304C00_ _ _ _
4700 „ 5 11 18 15 FKP4O114704B00_ _ _ _ 7 14 18 15 FKP4R014704D00_ _ _ _
6800 „ 5 11 18 15 FKP4O116804B00_ _ _ _ 8 15 18 15 FKP4R016804F00_ _ _ _
0.01 mF 6 12.5 18 15 FKP4O121004C00_ _ _ _ 9 16 18 15 FKP4R021004J00_ _ _ _
5 14 26.5 22.5 FKP4O121005A00_ _ _ _ 6 15 26.5 22.5 FKP4R021005B00_ _ _ _
0.015 „ 7 14 18 15 FKP4O121504D00_ _ _ _ 7 16.5 26.5 22.5 FKP4R021505D00_ _ _ _
6 15 26.5 22.5 FKP4O121505B00_ _ _ _
0.022 „ 8 15 18 15 FKP4O122204F00_ _ _ _ 8.5 18.5 26.5 22.5 FKP4R022205F00_ _ _ _
6 15 26.5 22.5 FKP4O122205B00_ _ _ _
0.033 „ 7 16.5 26.5 22.5 FKP4O123305D00_ _ _ _ 10.5 19 26.5 22.5 FKP4R023305G00_ _ _ _
9 19 31.5 27.5 FKP4R023306A00_ _ _ _
0.047 „ 8.5 18.5 26.5 22.5 FKP4O124705F00_ _ _ _ 11 21 31.5 27.5 FKP4R024706B00_ _ _ _
9 19 31.5 27.5 FKP4O124706A00_ _ _ _
0.068 „ 11 21 26.5 22.5 FKP4O126805I00_ _ _ _ 13 24 31.5 27.5 FKP4R026806D00_ _ _ _
9 19 31.5 27.5 FKP4O126806A00_ _ _ _
0.1 mF 11 21 31.5 27.5 FKP4O131006B00_ _ _ _ 15 26 31.5 27.5 FKP4R031006F00_ _ _ _
0.15 „ 13 24 31.5 27.5 FKP4O131506D00_ _ _ _ 15 26 31.5 27.5 FKP4R031506F00_ _ _ _
0.22 „ 15 26 31.5 27.5 FKP4O132206F00_ _ _ _ 20 39.5 31.5 27.5 FKP4R032206J00_ _ _ _
17 29 41.5 37.5 FKP4R032207E00_ _ _ _
0.33 „ 17 34.5 31.5 27.5 FKP4O133306I00_ _ _ _ 19 32 41.5 37.5 FKP4R033307F00_ _ _ _
17 29 41.5 37.5 FKP4O133307E00_ _ _ _
0.47 „ 19 32 41.5 37.5 FKP4O134707F00_ _ _ _ 20 39.5 41.5 37.5 FKP4R034707G00_ _ _ _
0.68 „ 20 39.5 41.5 37.5 FKP4O136807G00_ _ _ _ 24 45.5 41.5 37.5 FKP4R036807H00_ _ _ _
1.0 mF 24 45.5 41.5 37.5 FKP4O141007H00_ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x Urms + UDC T Ur
** PCM = Printed circuit module = pin spacing
Dims. in mm.
Ionisation inception level in isolated cases may
be lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
Continuation page 65
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
65
08.11
Continuation
General Data
WIMA FKP 4
D
Capacitance 1600 VDC/500 VAC* 2000 VDC/550 VAC*
W H L PCM** Part number W H L PCM** Part number
100 pF 5 11 18 15 FKP4T001004B00_ _ _ _ 5 11 18 15 FKP4U001004B00_ _ _ _
150 „ 5 11 18 15 FKP4T001504B00_ _ _ _ 5 11 18 15 FKP4U001504B00_ _ _ _
220 „ 5 11 18 15 FKP4T002204B00_ _ _ _ 5 11 18 15 FKP4U002204B00_ _ _ _
330 „ 5 11 18 15 FKP4T003304B00_ _ _ _ 5 11 18 15 FKP4U003304B00_ _ _ _
470 „ 5 11 18 15 FKP4T004704B00_ _ _ _ 5 11 18 15 FKP4U004704B00_ _ _ _
680 „ 5 11 18 15 FKP4T006804B00_ _ _ _ 5 11 18 15 FKP4U006804B00_ _ _ _
1000 pF 5 11 18 15 FKP4T011004B00_ _ _ _ 5 11 18 15 FKP4U011004B00_ _ _ _
1500 „ 5 11 18 15 FKP4T011504B00_ _ _ _ 6 12.5 18 15 FKP4U011504C00_ _ _ _
2200 „ 6 12.5 18 15 FKP4T012204C00_ _ _ _ 7 14 18 15 FKP4U012204D00_ _ _ _
3300 „ 7 14 18 15 FKP4T013304D00_ _ _ _ 9 16 18 15 FKP4U013304J00_ _ _ _
6 15 26.5 22.5 FKP4U013305B00_ _ _ _
4700 „ 8 15 18 15 FKP4T014704F00_ _ _ _ 7 16.5 26.5 22.5 FKP4U014705D00_ _ _ _
6800 „ 9 16 18 15 FKP4T016804J00_ _ _ _ 8.5 18.5 26.5 22.5 FKP4U016805F00_ _ _ _
6 15 26.5 22.5 FKP4T016805B00_ _ _ _
0.01 mF 6 15 26.5 22.5 FKP4T021005B00_ _ _ _ 10.5 19 26.5 22.5 FKP4U021005G00_ _ _ _
0.015 „ 8.5 18.5 26.5 22.5 FKP4T021505F00_ _ _ _ 11 21 26.5 22.5 FKP4U021505I00_ _ _ _
9 19 31.5 27.5 FKP4U021506A00_ _ _ _
0.022 „ 10.5 19 26.5 22.5 FKP4T022205H00_ _ _ _ 11 21 31.5 27.5 FKP4U022206B00_ _ _ _
9 19 31.5 27.5 FKP4T022206A00_ _ _ _ 11 22 41.5 37.5 FKP4U022207B00_ _ _ _
0.033 „ 11 21 31.5 27.5 FKP4T023306B00_ _ _ _ 13 24 31.5 27.5 FKP4U023306D00_ _ _ _
13 24 41.5 37.5 FKP4U023307C00_ _ _ _
0.047 „ 13 24 31.5 27.5 FKP4T024706D00_ _ _ _ 15 26 31.5 27.5 FKP4U024706F00_ _ _ _
15 26 41.5 37.5 FKP4U024707D00_ _ _ _
0.068 „ 15 26 31.5 27.5 FKP4T026806F00_ _ _ _ 17 34.5 31.5 27.5 FKP4U026806I00_ _ _ _
17 29 41.5 37.5 FKP4U026807E00_ _ _ _
0.1 mF 17 34.5 31.5 27.5 FKP4T031006I00_ _ _ _ 19 32 41.5 37.5 FKP4U031007F00_ _ _ _
0.15 „ 20 39.5 31.5 27.5 FKP4T031506J00_ _ _ _ 24 45.5 41.5 37.5 FKP4U031507H00_ _ _ _
17 29 41.5 37.5 FKP4T031507E00_ _ _ _
0.22 „ 19 32 41.5 37.5 FKP4T032207F00_ _ _ _ Dims. in mm.
0.33 „ 20 39.5 41.5 37.5 FKP4T033307G00_ _ _ _
0.47 „ 24 45.5 41.5 37.5 FKP4T034707H00_ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x Urms + UDC T Ur
** PCM = Printed circuit module = pin spacing
Ionisation inception level in isolated cases may be lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide):
630 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
350
2
1
U
V
rms
4700 pF
2200 pF 1000 pF
470 pF
100 pF
0.47 µF 1.0 µF
1.5 µF
0.047 µF
0.1 µF
0.22 µF
0.022 µF
0.01 µF
1000 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
400
2
1
U
V
rms
2200 pF
1000 pF
470 pF
100 pF
0.022 µF
0.01 µF
0.047 µF
0.1 µF
0.22 µF
0.47 µF
1.0 µF
4700 pF
1250 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
10
5
2
10
450
2
1
U
V
rms
2200 pF
0.047 µF
0.022 µF
0.01 µF
0.1 µF
0.22 µF 0.47 µF
0.68 µF
4700 pF
1000 pF
470 pF
100 pF
1600 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
2
10
5
2
10
500
2
1
U
V
rms
1000 pF
0.047 µF
0.022 µF
0.1 µF
0.22 µF
0.47 µF
470 pF
220 pF
100 pF
2200 pF
4700 pF
0.01µF
2000 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
2
10
5
2
10
550
2
1
U
V
rms
0.047 µF
0.1 µF
0.15 µF
0.022 µF
4700 pF
2200 pF
1000 pF
470 pF
220 pF
100 pF
0.01 µF
14
08.11
D
Recommendation for Processing
and Application of
Through-Hole Capacitors
Soldering Process
A preheating of through-hole WIMA
capacitors is allowed for temperatures
Tmax P 100 ° C.
In practice a preheating duration of
t P 5 min. has been proven to be best.
Single wave soldering
Soldering bath temperature: T P 260 ° C
Immersion time: t P 5 sec
Double wave soldering
Soldering bath temperature: T P 260 ° C
Immersion time: 2 x t P 3 sec
Due to different soldering processes and
heat requirements the graphs are to be
regarded as a recommendation only.
2 s 3 s
30 60 90 120 150 180 210 240 sec][
t
T
260
240
220
200
180
160
140
120
100
80
60
40
20
[°C] 10 s
see detail-
enlargement
Wave soldering
Typical temperature/time graph for double wave soldering
WIMA Quality and Environmental Philosophy
ISO 9001:2008 Certification
ISO 9001:2008 is an international basic
standard of quality assurance systems for
all branches of industry. The approval
according to ISO 9001:2008 of our
factories by the VDE inspectorate certifies
that organisation, equipment and moni-
toring of quality assurance in our factories
correspond to internationally recognized
standards.
WIMA WPCS
The WIMA Process Control System (WPCS)
is a quality surveillance and optimization
system developed by WIMA. WPCS is a
major part of the quality-oriented WIMA
production. Points of application of WPCS
during production process:
” incoming material inspection
” metallization
” film inspection
” schoopage
” pre-healing
” pin attachment
” cast resin preparation/
encapsulation
” 100% final inspection
” AQL check
WIMA Environmental Policy
All WIMA capacitors, irrespective of
whether through-hole devices or SMD,
are made of environmentally friendly
materials. Neither during manufacture
nor in the product itself any toxic
substances are used, e.g.
– Lead – PBB/PBDE
– PCB – Arsenic
– CFC – Cadmium
– Hydrocarbon chloride – Mercury
– Chromium 6+ – etc.
We merely use pure, recyclable materials
for packing our components, such as:
” carton
” cardboard
” adhesive tape made of paper
” polystyrene
We almost completely refrain from using
packing materials such as:
” foamed polystyrene (Styropor®)
” adhesive tapes made of plastic
” metal clips
RoHS Compliance
According to the RoHS Directive 2002/95/EC
certain hazardous substances like e.g. lead,
cadmium, mercury must not be used any
longer in electronic equipment as of July 1st,
2006. For the sake of the environment WIMA
has refraind from using such substances since
years already.
Tape for lead-free WIMA capacitors
DIN EN ISO 14001:2009
WIMA’s environmental management has
been established in accordance with the
guidelines of DIN EN ISO 14001:2009 to
optimize the production processes with
regard to energy and resources.
127
08.11
D
Dimensions for Radial Taping
Designation Symbol PCM 2.5 taping PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping
Carrier tape width W 18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
Hold-down tape width W
0
6.0 for hot-sealing 6.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing
adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape
Hole position W
1
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
Hold-down tape position W
2
0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max.
Feed hole diameter D
0
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
Pitch of component P 12.7
p1.0
12.7
p1.0
12.7
p1.0
25.4
p1.0
25.4
p1.0
38.1
p1.5
3
*8.1
p1.5
or 50.8
p1.5
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
Feed hole pitch P
0
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
Feed hole centre P
1
5.1
p0.5
3.85
p0.7
2.6
p0.7
7.7
p0.7
5.2
p0.7
7.8
p0.7
5.3
p0.7
to pin
Hole centre to P
2
6.35
p1.3
6.35
p1.3
6.35
p1.3
12.7
p1.3
12.7
p1.3
19.05
p1.3
19.05
p1.3
component centre
Feed hole centre to bottom H 16.5
p0.3
16.5
p0.3
16.5
p0.5
16.5
p0.5
16.5
p0.5
16.5
p0.5
16.5
p0.5
edge of the component 18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
Feed hole centre to top H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
edge of the component 32.25 max. 32.25 max. 24.5 to 31.5 25.0 to 31.5 26.0 to 37.0 30.0 to 43.0 35.0 to 45.0
Pin spacing at F 2.5
p0.5
5.0
+0.8
7.5
p0.8
10.0
p0.8
15
p0.8
22.5
p0.8
27.5
p0.8
upper edge of carrier tape
–0.2
Pin diameter d 0.4
p0.05
0.5
p0.05
„
0.5
p0.05
or
0.6
–0.05
„
0.5
p0.05
or
0.6
–0.05
0.8
–0.05
0.8
–0.05
0.8
–0.05
Component alignment Dh p 2.0 max. p 2.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max.
Total tape thickness t 0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
ROLL/AMMO AMMO
Package
(see also page 128)
Unit see details page 130.
Dims in mm.
„ Diameter of pins see General Data. Please clarify customer-specific deviations with the manufacturer.
* PCM 10 and PCM 15 can be crimped to PCM 7.5.
Position of components according to PCM 7.5 (sketch 1). P0 = 12.7 or 15.0 is possible
REEL
P 360 max.
B
52 p2 depending on
P 30 p1 58 p2 comp. dimensions
52 p2 54 p2 depending
REEL
P 360 max. B 58 p2
or
REEL
P 500 max. B 60 p2 on PCM and
P 30 p1 66 p2 P 25 p1 68 p2 component dimensions
+0.06 +0,06 +0,08 +0,08 +0.08
Typical Dimensions for
Taping Configuration
129
08.11
D
Rights reserved to amend design data without prior notification. Moulded versions. * Tray-Packing-System
Samples and pre-production needs on request.
Packing Quantities for Bulk Capacitors and TPS*
PCM Size pcs. per packaging unit bulk pcs. per packaging unit/TPS*
Mini Standard Maxi Mini Standard
W H L Codes M S G X Y
2.5 mm
2.5 7 4.6 0B 1000 5000 10 000 – –
3 7.5 4.6 0C 1000 5000 10 000 – –
3.8 8.5 4.6 0D 1000 5000 10 000 – –
4.6 9 4.6 0E 1000 5000 10 000 – –
5.5 10 4.6 0F 1000 5000 10 000 – –
5 mm
2.5 6.5 7.2 1A 2000 5000 10 000 – –
3 7.5 7.2 1B 1000 5000 – – –
3.5 8.5 7.2 1C 1000 5000 – – –
4.5 6 7.2 1D 1000 6000 – – –
4.5 9.5 7.2 1E 1000 4000 – – –
5 10 7.2 1F 1000 3500 – – –
5.5 7 7.2 1G 1000 4000 – – –
5.5 11.5 7.2 1H 500 2500 – – –
6.5 8 7.2 1I 1000 2500 – – –
7.2 8.5 7.2 1J 500 2500 – – –
7.2 13 7.2 1K 500 2000 – – –
8.5 10 7.2 1L 500 2000 – – –
8.5 14 7.2 1M 500 1500 – – –
11 16 7.2 1N 250 1000 – – –
7.5 mm
2.5 7 10 2A 1000 5000 – – –
3 8.5 10 2B 1000 5000 – – –
4 9 10 2C 1000 4000 – – –
4.5 9.5 10.3 2D 1000 3500 – – –
5 10.5 10.3 2E 1000 3000 – – –
5.7 12.5 10.3 2F 500 2000 – – –
7.2 12.5 10.3 2G 500 1500 – – –
10 mm
3 9 13 3A 1000 3000 – – –
4 8.5 13.5 FA 500 3000 – – –
4 9 13 3C 1000 3000 – – –
4 9.5 13 3D 1000 3000 – – –
5 10 13.5 FB 500 2000 – – –
5 11 13 3F 1000 3000 – – –
6 12 13 3G 800 2400 – – –
6 12.5 13 3H 800 2400 – – –
8 12 13 3I 500 2000 – – –
15 mm
5 11 18 4B 800 2400 – – –
5 13 19 FC 200 1000 – –
6 12.5 18 4C 500 2000 – – –
6 14 19 FD 250 1000 – –
7 14 18 4D 400 1600 – – –
7 15 19 FE 250 1000 – –
8 15 18 4F 400 1200 – – –
8 17 19 FF 100 500 – –
9 14 18 4H 400 1200 – – –
9 16 18 4J 300 900 – – –
10 18 19 FG 100 500 – – –
11 14 18 4M 300 1000 – – –
22.5 mm
5 14 26.5 5A 300 1200 – – –
6 15 26.5 5B 250 1000 – – –
7 16.5 26.5 5D 190 760 – – –
8 20 28 FH 125 500 – – –
8.5 18.5 26.5 5F 125 500 – – –
10 22 28 FI – – – 90 540
10.5 19 26.5 5G – – – 170 680
10.5 20.5 26.5 5H – – – 170 680
11 21 26.5 5I – – – 170 680
12 24 28 FJ – – – 75 450
27.5 mm
9 19 31.5 6A – – – 160 640
11 21 31.5 6B – – – 136 544
13 24 31.5 6D – – – 112 448
13 25 33 FK – – – 56 336
15 26 31.5 6F – – – 96 384
15 26 33 FL – – – 48 288
17 29 31.5 6G – – – 88 176
17 34.5 31.5 6I – – – 88 176
20 32 33 FM – – – 36 216
20 39.5 31.5 6J – – – 36 144
37.5 mm
9 19 41.5 7A – – – 60 480
11 22 41.5 7B – – – 51 408
13 24 41.5 7C – – – 84 252
15 26 41.5 7D – – – 72 144
17 29 41.5 7E – – – 66 132
19 32 41.5 7F – – – 54 108
20 39.5 41.5 7G – – – 27 108
24 45.5 41.5 7H – – – 21 84
130
08.11
D
* for 2-inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification.
Samples and pre-production needs 1 packing unit minimum.
PCM Size
ROLL REEL AMMO
P 360 P 500 340 x 340 490 x 370
H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5
W H L Codes N O F I H J A C B D
2.5 mm
2.5 7 4.6 0B 2200 2500 – 2800 –
3 7.5 4.6 0C 2000 2300 – 2300 –
3.8 8.5 4.6 0D 1500 1800 – 1800 –
4.6 9 4.6 0E 1200 1500 – 1500 –
5.5 10 4.6 0F 900 1200 – 1200 –
5 mm
2.5 6.5 7.2 1A 2200 2500 – 2800 –
3 7.5 7.2 1B 2000 2300 – 2300 –
3.5 8.5 7.2 1C 1600 2000 – 2000 –
4.5 6 7.2 1D 1300 1500 – 1500 –
4.5 9.5 7.2 1E 1300 1500 – 1500 –
5 10 7.2 1F 1100 1400 – 1400 –
5.5 7 7.2 1G 1000 1200 – 1200 –
5.5 11.5 7.2 1H 1000 1200 – 1200 –
6.5 8 7.2 1I 800 1000 – 1000 –
7.2 8.5 7.2 1J 700 1000 – 1000 –
7.2 13 7.2 1K 700 950 – 1000 –
8.5 10 7.2 1L 600 800 – 800 –
8.5 14 7.2 1M 600 800 – 800 –
11 16 7.2 1N 500 700 – 700 –
7.5 mm
2.5 7 10 2A – 2500 4400 2500 –
3 8.5 10 2B – 2200 4300 2300 4150
4 9 10 2C – 1700 3200 1700 3100
4.5 9.5 10.3 2D – 1500 2900 1400 2800
5 10.5 10.3 2E – 1300 2500 1300 –
5.7 12.5 10.3 2F – 1000 2200 1100 –
7.2 12.5 10.3 2G – 900 1800 1000 –
10 mm
3 9 13 3A – 1100 2200 – 1900
4 8.5 13.5 FA – 900 1600 – 1450
4 9 13 3C – 900 1600 – 1450
4 9.5 13 3D – 900 1600 – 1400
5 10 13.5 FB – 700 1300 – 1200
5 11 13 3F – 700 1300 – 1200
6 12 13 3G – 550 1100 – 1000
6 12.5 13 3H – 550 1100 – 1000
8 12 13 3I – 400 800 – 740
15 mm
5 11 18 4B – 600 1200 – 1150
5 13 19 FC – 600 1200 – 1200
6 12.5 18 4C – 500 1000 – 1000
6 14 19 FD – 500 1000 – 1000
7 14 18 4D – 450 900 – 850
7 15 19 FE – 450 900 – 850
8 15 18 4F – 400 800 – 740
8 17 19 FF – 400 800 – 740
9 14 18 4H – 350 700 – 650
9 16 18 4J – 350 700 – 650
10 18 19 FG – 300 650 – 590
11 14 18 4M – 300 600 – 540
22.5 mm
5 14 26.5 5A – – 800 – 770
6 15 26.5 5B – – 700 – 640
7 16.5 26.5 5D – – 600 – 550
8 20 28 FH – – 500 – 480
8.5 18.5 26.5 5F – – 480 – 450
10 22 28 FI – – 420 – 380
10.5 19 26.5 5G – – 400 – 360
10.5 20.5 26.5 5H – – 400 – 360
11 21 26.5 5I – – 380 – 350
12 24 28 FJ – – 350 – 310
27.5 mm
9 19 31.5 6A – – 460/340* – 420
11 21 31.5 6B – – 380/280* – 350
13 24 31.5 6D – – 300 – 290
15 26 31.5 6F – – 270 – 250
Packing Units for Taped Capacitors
with Radial Leads
125
08.11
D
A WIMA part number consists of 18 digits and is composed as follows:
Field 1 - 4: Type description
Field 5 - 6: Rated voltage
Field 7 - 10: Capacitance
Field 11 - 12: Size and PCM
Field 13 - 14: Special features (e.g. Snubber versions)
Field 15: Capacitance tolerance
Field 16: Packing
Field 17 - 18: Lead length (untaped)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D
MKS 2 63 VDC 0.01 mF 2.5 x 6.5 x 7.2 -20 %bulk 6 -2
WIMA Part Number System
The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the
pages of the respective WIMA range.
Type description: Rated voltage: Capacitance: Size: Tolerance:
SMD-PET = SMDT 2.5 VDC = A1 22 pF = 0022 4.8 x 3.3 x 3 Size 1812 = X1 20 % = M
SMD-PPS = SMDI 4 VDC = A2 47 pF = 0047 4.8 x 3.3 x 4 Size 1812 = X2 10 % = K
FKP 02 = FKP0 14 VDC = A3 100 pF = 0100 5.7 x 5.1 x 3.5 Size 2220 = Y1 5 % = J
MKS 02 = MKS0 28 VDC = A4 150 pF = 0150 5.7 x 5.1 x 4.5 Size 2220 = Y2 2.5 % = H
FKS 2 = FKS2 40 VDC = A5 220 pF = 0220 7.2 x 6.1 x 3 Size 2824 = T1 1 % = E
FKP 2 = FKP2 5 VDC = A6 330 pF = 0330 7.2 x 6.1 x 5 Size 2824 = T2 ...
MKS 2 = MKS2 50 VDC = B0 470 pF = 0470 10.2 x 7.6 x 5 Size 4030 = K1
MKP 2 = MKP2 63 VDC = C0 680 pF = 0680 12.7 x 10.2 x 6 Size 5040 = V1
FKS 3 = FKS3 100 VDC = D0 1000 pF = 1100 15.3 x 13.7 x 7 Size 6054 = Q1 Packing:
FKP 3 = FKP3 160 VDC = E0 1500 pF = 1150 2.5 x 7 x 4.6 PCM 2.5 = 0B AMMO H16.5 340 x 340 = A
MKS 4 = MKS4 250 VDC = F0 2200 pF = 1220 3 x 7.5 x 4.6 PCM 2.5 = 0C AMMO H16.5 490 x 370 = B
MKP 4 = MKP4 400 VDC = G0 3300 pF = 1330 2.5 x 6.5 x 7.2 PCM 5 = 1A AMMO H18.5 340 x 340 = C
MKP 10 = MKP1 450 VDC = H0 4700 pF = 1470 3 x 7.5 x 7.2 PCM 5 = 1B AMMO H18.5 490 x 370 = D
FKP 4 = FKP4 600 VDC = I0 6800 pF = 1680 2.5 x 7 x 10 PCM 7.5 = 2A REEL H16.5 360 = F
FKP 1 = FKP1 630 VDC = J0 0.01 mF= 2100 3 x 8.5 x 10 PCM 7.5 = 2B REEL H16.5 500 = H
MKP-X2 = MKX2 700 VDC = K0 0.022 mF= 2220 3 x 9 x 13 PCM 10 = 3A REEL H18.5 360 = I
MKP-X2 R = MKXR 800 VDC = L0 0.047 mF= 2470 4 x 9 x 13 PCM 10 = 3C REEL H18.5 500 = J
MKP-Y2 = MKY2 850 VDC = M0 0.1 mF= 3100 5 x 11 x 18 PCM 15 = 4B ROLL H16.5 = N
MP 3-X2 = MPX2 900 VDC = N0 0.22 mF= 3220 6 x 12.5 x 18 PCM 15 = 4C ROLL H18.5 = O
MP 3-X1 = MPX1 1000 VDC = O1 0.47 mF= 3470 5 x 14 x 26.5 PCM 22.5 = 5A BLISTER W12 180 = P
MP 3-Y2 = MPY2 1100 VDC = P0 1 mF= 4100 6 x 15 x 26.5 PCM 22.5 = 5B BLISTER W12 330 = Q
MP 3R-Y2 = MPRY 1200 VDC = Q0 2.2 mF= 4220 9 x 19 x 31.5 PCM 27.5 = 6A BLISTER W16 330 = R
Snubber MKP = SNMP 1250 VDC = R0 4.7 mF= 4470 11 x21 x 31.5 PCM 27.5 = 6B BLISTER W24 330 = T
Snubber FKP = SNFP 1500 VDC = S0 10 mF= 5100 9 x 19 x 41.5 PCM 37.5 = 7A Bulk Mini = M
GTO MKP = GTOM 1600 VDC = T0 22 mF= 5220 11 x 22 x 41.5 PCM 37.5 = 7B Bulk Standard = S
DC-LINK MKP 4 = DCP4 2000 VDC = U0 47 mF= 5470 94 x 49 x 182 DCH_ = H0 Bulk Maxi = G
DC-LINK MKP 5 = DCP5 2500 VDC = V0 100 mF= 6100 94 x 77 x 182 DCH_ = H1 TPS Mini = X
DC-LINK MKP 6 = DCP6 3000 VDC = W0 220 mF= 6220 ... TPS Standard = Y
DC-LINK HC = DCH_ 4000 VDC = X0 1 F = A010 ...
SuperCap C = SCSC 6000 VDC = Y0 2.5 F = A025
SuperCap MC = SCMC 250 VAC = 0W 50 F = A500 Special features:
SuperCap R = SCSR 275 VAC = 1W 100 F = B100 Standard = 00 Lead length (untaped)
SuperCap MR = SCMR 300 VAC = 2W 110 F = B110 Version A1 = 1A 3.5 ±0.5 = C9
400 VAC = 3W 600 F = B600 Version A1.1.1 = 1B 6 -2 = SD
440 VAC = 4W 1200 F = C120 Version A1.2 = 1C 16 ±1 = P1
500 VAC = 5W ... ... ...
...