www.regalbeloitcapacitors.com
CPD 512
03 / 07
AC and DC General Purpose Applications
Capacitor Application Data Sheet
PRIMARY INFORMATION
( Essential )
1. Application: ________________________________________________________________________________
2. Capacitance:_______________________Tolerance:_______________________________________________
3. Peak Voltage:_____________________RMS Voltage: ____________________________________________
4. Peak Current:____________________ RMS Current: ____________________________________________
5. Transient Voltage:_______________Duration:_____________Freq. of Occurrence:__________________
6. Frequency or Repetition Rate (Hz):________________Duty Cycle:________________________________
7. Ambient Temperature: _______________Max.:_______________Min.:_____________________________
8. Capacitor Charge Time: ______________Discharge Time:_______________________________________
9. Required Operating Life (Hours): ____________________________________________________________
10. Waveforms:
SECONDARY INFORMATION (Provide as Appropriate)
11. Physical Size Limitations: _________________________________________________________________
12. Mounting Requirements: _________________________________________________________________
13. Applicable Specifications: ________________________________________________________________
14. Type of Cooling Available: ________________________________________________________________
15. Unusual Atmospheric Conditions: ________________________________________________________
16. Other Special Requirements: _____________________________________________________________
17. Number of Samples Required: _______________18. Potential Usage: __________________________
CPD 512
–
03/ 07
www.regalbeloitcapacitors.com
To ensure correct selection of a capacitor for your application,
please provide the information indicated below. This sheet
may be duplicated or additional copies may be obtained from
RBC.
Of particular importance are the voltages and current
waveforms complete with values of voltage and current
over a complete cycle.
Send this data to your local RBC
Sales Representative or directly to:
GE Capacitors by Regal Beloit
11970 PELLICANO DR., SUITE 300
EL PASO ,TEXAS 79936
USA
Fax: (915) 849-5799
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
1
Table of Contents
Descriptive Information 1
Product Safety 3
General Purpose AC Capacitors-Gem III (240-370VAC) 4
Application Notes/ Technical Data 6
General Purpose AC Capacitors-Gem III (600 VAC) 10
Application Notes/ Technical Data 12
General Purpose AC Capacitors-Gem III (660 VAC) (Series Section) 16
Application Notes/ Technical Data 18
Cross Reference 660 Volt AC 22
Dual Rated Capacitors 23
Mounting Hardware for Gem III Capacitors 25
Descriptive Information
RBC Capacitors for General Purpose Applications
Metallized film capacitors are unsurpassed in terms of size, weight, performance, and reliability for ac
applications. RBC - Capcom brings over 60 years of capacitor manufacturing experience to the
product lines described in this publication. These capacitors represent the best in product design for
long-term reliability and safe operation. RBC’s materials, product, and process development work
continue to provide capacitor users with outstanding total value.
The specific products in this bulletin are aimed at market/application segments for General Purpose,
Power Supply and Electronic Power Conversion.
The Gem III General Purpose Capacitors are used for filtering on a wide variety of light industrial
equipment. The conversion of electrical power in uninterruptible power supplies and drive control
systems requires filter capacitors. An application note is included to help customers in the correct
choice and use of these capacitors.
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
2
Descriptive Information
GEM III Construction
GEM III Series Construction
RBC 's Gem III capacitors are manufactured with
high-grade metallized polypropylene film. This film
is in the range of 6 to 10 microns thick, depending
on the application voltage and conditions. The
metallized electrode is several hundred angstroms
thick.
The film is wound into capacitor rolls on high-
speed, high-precision machines. The winding is
extremely tight so that there is not enough space
between the layers for corona (localized partial
electrical discharges) to occur. The rolls are
sprayed on both ends with metal to make
connection to the extremely thin edges of the
metalized electrodes.
The rolls are assembled in metal cases, RBC's
proprietary Dielektrol VI liquid is introduced under
vacuum, and the capacitors are sealed. They are
then subjected to 100% electrical testing for
capacitance, dissipation factor, and high potential
electrical withstand, both terminal-to-terminal and
terminal-to-case.
RBC 's Gem III capacitors are manufactured with
high-grade metallized polypropylene film. This film is
in the range of 6 to 10 microns thick, depending on
the application voltage and conditions. The
metallized electrode is several hundred angstroms
thick.
The film is wound into capacitor rolls on high-speed,
high-precision machines. The winding is extremely
tight so that there is not enough space between the
layers for corona (localized partial electrical
discharges) to occur. The rolls are sprayed on both
ends with metal to make connection to the
extremely thin edges of the metalized electrodes.
This process is critical to the quality and
performance of the capacitors.
The rolls are assembled in metal cases, RBC's
proprietary Dielektrol VI liquid is introduced under
vacuum, and the capacitors are sealed. They are
then subjected to 100% electrical testing for
capacitance, dissipation factor, and high potential
electrical withstand, both terminal-to-terminal and
terminal-to-case.
Product Safety
3
Case Style a b Case Style a
A
2.00
1.00
P
1.62
B
2.25
1.25
S
1.88
C
2.50
1.62
T
2.38
D
3.25
1.62
*Underwriter's Laboratories
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Pressure Sensitive Interrupter
All the capacitors listed in this publication contain
RBC's Pressure Sensitive Interrupter (PSI). This
device, developed by RBC, is designed to sense the
build-up of pressure within the capacitor if a fault
occurs and to interrupt the internal electrical
connections before the case can rupture.
The PSI carries U.L. * recognition for applications
where the specified fault currents are not exceeded.
The fault current is the maximum current that is
available from the circuit to flow through the capacitor
if the capacitor were to become a short circuit with
zero impedance. It is the responsibility of the
capacitor user to determine what the available
fault current is for a particular application.
In the Catalog Number listings a four character U.L.
Code, Pxxx, is given. This number is part of the listing
for RBC in U.L. File No. E7793. When applying to U.L.
for approvals or recognition of equipment using these
capacitors refer to the Pxxx number and not the
Catalog Number of the capacitor in question.
Proper operation of the PSI requires that the cover be
able to expand without restriction. The following
mounting considerations should be noted in mounting
these capacitors.
Mounting Considerations
Vertical Clearance
There must be sufficient clearance
between the tops of the terminals (and/or
the assembled wire connectors) and a
plane perpendicular to the capacitor
terminals. This clearance must be at least
0.5 inches plus the electrical spacing
requirements of the end application.
Cut
-
Out Clearance
In certain instances capacitors are mounted
with the top of the capacitor case resting
against the chassis and the terminals
protruding through the chassis. Care must
be taken to see that the cutout in the
chassis is large enough. The following
dimensions are recommended.
General Purpose AC Capacitors
–
Gem III
4
SPECIFICATIONS:
Available Capacitance Range: 2 to 120 µF
Capacitance Tolerance: ± 6%
Capacitance Variation with Temperature: See chart E-3 on page 9.
Rated Voltage: See Rating Tables. Rating is the 60Hz RMS voltage for a
sinusoidal waveform. For other waveforms refer to the
Application Note on page 6.
Leakage Current: 30 µA maximum
Frequency: 50/60 Hz. For higher frequencies refer to the Application.
Note on page 7.
Operating Temperature: -40 ˚C to +70 ˚C
Storage Temperature: -40 ˚C to +90 ˚C
Operating Life: 60,000 hours with 94% survival
Dissipation Factor: 0.1% maximum
Case Material/Finish: Unpainted Aluminum case, Ternplate steel cover.
Terminations: 0.250” x 0.031” quick connect blades.
Dielectric Fluid: Dielektrol VI
Internal Protection: UL recognized Pressure Sensitive Interrupter. See Ratings
Table for RBC’s Code Number listed under RBC’s UL. File
E7793 (N). For UL submittals with these capacitors use the
RBC ’Pxxx’ number not the Catalog Number. The
corresponding generic UL designation that includes the
Available Fault Current (AFC) rating is given below. All these
capacitors are capable of interrupting available fault currents
of up to 10,000 amperes.
Case Style RBC Code Generic UL Code
A
P921
A10000AFC
P
P965
P10000AFC
S
P968
S10000AFC
T
P969
T10000AFC
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
240 and 370 Volts AC
This series of Gem III is specifically designed for
applications such as AC filters where harmonic
frequencies greater than 60Hz are common. Application
Data is provided starting on page 5 that gives the
Equivalent Series Resistance (ESR) for these units. This
allows the user to calculate the losses for each
design/application and to ensure that they are kept
within the permissible limits. Any questions regarding
the suitability of a capacitor for a particular application
may be referred to RBC Engineers through your RBC
sales representative.
* It is RBC’s goal to serve you with the most cost
effective and the highest quality capacitor designs.
Standardization to the catalog type shown is a major
program at RBC.
However, RBC remains sensitive to your needs and
requirements, and will continue to offer the above
ratings (and more) in case configurations to meet your
application (s
).
General Purpose AC Capacitors
–
Gem III
5
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Case Style A
240 and 370 Volts AC
*STANDARD RATINGS
Case Style P, S, and T
Capacitance
(µ
µµ
µF)
Catalog
Number
Case
Style
Height
C (ins)
UL
Code
15
97F8036
P
2.88
P965
25
97F8037
P
2.88
P965
30
97F8038
P
3.88
P965
35
97F8039
P
3.88
P965
40
97F8040
P
3.88
P965
45
97F8041
P
4.75
P965
50
97F8042
P
4.75
P965
55
97F8043
P
4.75
P965
60
97F8044
S
4.75
P968
65
97F8045
S
4.75
P968
70
97F8046
S
4.75
P968
75
97F8047
S
4.75
P968
80
97F8048
T
3.88
P969
85
97F8049
T
3.88
P969
90
97F8050
T
3.88
P969
95
97F8051
T
4.75
P969
100
97F8052
T
4.75
P969
120
97F8053
T
4.75
P969
3
97F8054
A
2.12
P921
4
97F8055
A
2.12
P921
5
97F8056
A
2.88
P921
6
97F8057
A
2.88
P921
7.5
97F8058
A
2.88
P921
10
97F8059
A
3.88
P921
12.5
97F8060
A
3.88
P921
15
97F8061
P
2.88
P965
17.5
97F8062
P
2.88
P965
20
97F8063
P
3.88
P965
25
97F8064
P
3.88
P965
30
97F8065
P
3.88
P965
35
97F8066
P
4.75
P965
40
97F8067
P
4.75
P965
45
97F8068
S
4.75
P968
50
97F8069
S
4.75
P968
55
97F8070
S
4.75
P968
60
97F8071
T
3.88
P969
65
97F8072
T
3.88
P969
70
97F8073
T
4.75
P969
240 Volts A-C Nominal
370 Volts A-C Nominal
Application Note
6
Catalog
Number µ
µµ
µFESR
ohms
Curve
Number
97F8036 15 0.0257 2
97F8037 25 0.0180 2
97F8038 30 0.0228 3
97F8039 35 0.0206 3
97F8040 40 0.0190 3
97F8041 45 0.0241 4
97F8042 50 0.0226 4
97F8043 55 0.0213 4
97F8044 60 0.0215 5
97F8045 65 0.0206 5
97F8046 70 0.0198 5
97F8047 75 0.0191 5
97F8048 80 0.0164 5
97F8049 85 0.0160 5
97F8050 90 0.0156 5
97F8051 95 0.0193 6
97F8052 100 0.0189 6
97F8053 120 0.0176 6
97F8054 3 0.0700 1
97F8055 4 0.0539 1
97F8056 5 0.0586 2
97F8057 6 0.0499 2
97F8058 7.5 0.0411 2
97F8059 10 0.0471 3
97F8060 12.5 0.0392 3
97F8061 15 0.0244 2
97F8062 17.5 0.0218 2
97F8063 20 0.0281 3
97F8064 25 0.0240 3
97F8065 30 0.0213 3
97F8066 35 0.0262 4
97F8067 40 0.0240 4
97F8068 45 0.0235 5
97F8069 50 0.0222 5
97F8070 55 0.0210 5
97F8071 60 0.0175 5
97F8072 65 0.0169 5
97F8073 70 0.0207 6
240 Volts AC Nominal
370 Volts AC Nominal
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
97F8000 Series 240 and 370 Volts AC
The 97F8000 series of capacitors
may be used in AC applications
where the voltage waveform is non-sinusoidal. This Application
Note is provided to assist in the correct use of the capacitors
where higher frequency harmonic currents are present. If you
need further assistance please contact RBC’s Capacitors
Operation through your normal sales channel.
Higher frequency currents are commonly encountered in the
filter circuits of Static Power Converters. These frequencies
range from 180 to 1500 Hz for a 60 Hz system in various
combinations of the odd harmonics depending on the type of
converter. Generally, there are not significant harmonic currents
above the 25th harmonic.
These capacitors can carry a total current of up to 15 amperes
RMS (fundamental plus harmonics). The Equivalent Series
Resistance (ERS) for each Catalog Number is shown in the ESR
tables on this page. This value may be used to calculate the
expected watts loss for a particular application. The user must
determine the total RMS current (fundamental plus harmonics)
for the application. The watts loss is then calculated using the
equation:
W = I 2 x ESR
Where I = Total RMS current
And ESR= Value from ESR tables.
The calculated watts from this equation must not exceed the
allowable watts loss shown on the curve corresponding to the
particular capacitor. Two sets of curves are shown, one for
natural circulation and one for forced air circulation.
NOTES
(1) In no case should the total RMS current of 15 amperes be
exceeded for any of these capacitors.
(2) Running the capacitors at case temperatures above 70 ºC
will have a significant effect on expected life. (See chart G-1 on
page 8 )
(3) Running the capacitors at voltages above the nominal rated
voltage will also result in significantly reduced life. (See chart G-
2 on page 8 )
Allowable Watts Loss
-
97F8000 ( 2
40 and 370 Volt ) Series
7
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Natural Circulation
Maximum Allowable
Watts Loss
Ambient Temperature (ºC) – Natural Circulation
Allowable Watts Loss - 97F8000 ( 240 and 370 Volt ) Series
Forced Circulation
Maximum Allowable
Watts Loss
Ambient Temperature (ºC) – Forced Circulation
General Purpose AC Capacitors
–
Gem III
Application Data 8
CPD 512
–
03 / 07
www.regal
beloitcapacitors.com
Life
Vs
Temperature
%
of Chart G-1
Life
Degrees ˚C
Life
Vs
Voltage
%
of Rated Chart G-2
Life
% of Rated Voltage
General Purpose AC Capacitors
–
Gem III
Application Data 9
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Percent Capacitance Vs Temperature
%
Capacitance Chart E-
3
Change
Temperature ( Degrees ˚C)
General Purpose AC Capacitors
–
Gem III
10
SPECIFICATIONS:
Available Capacitance Range: 1.5 to 45 µF
Capacitance Tolerance: ± 6%
Capacitance Variation with Temperature: See chart E-3 on page 15.
Rated Voltage: Se
e Rating Tables. Rating is the 60Hz RMS voltage for a
sinusoidal waveform. For other waveforms refer to the
Application Note on page 15.
Leakage Current: 30 µA maximum
Frequency: 50/60 Hz. For higher frequencies refer to the
Application.
Operating Temperature: -40 ˚C to +70 ˚C
Storage Temperature: -40 ˚C to +90 ˚C
Operating Life: 60,000 hours with 94% survival
Dissipation Factor: 0.1% maximum
Case Material/Finish: Unpainted Aluminum Contact factory for material /
finish to meet UL outdoor standards if required.
Terminations: 0.250” x 0.031” quick connect blades.
Dielectric Fluid: Dielektrol VI
Internal Protection: UL recognized Pressure Sensitive Interrupter. See
Ratings Table for RBC’s Code Number listed under
RBC’s UL. File E7793 (N). For UL submittals with these
capacitors use the RBC ’Pxxx’ number not the Catalog
Number. The corresponding generic UL designation
that includes the Available Fault Current (AFC) rating is
given below. All these capacitors are capable of
interrupting available fault currents of up to 10,000
amperes.
CPD 512
–
03 / 07
www.regalbeloitca
pacitors.com
Case Style
RBC Code
Generic UL Code
A P961 A10000AFC
B P962 B10000AFC
C P963 C10000AFC
D P964 D10000AFC
600 Volts AC
This series of Gem III is specifically designed for general
purpose AC applications in power supplies, UPS and
power conversion equipment. Application Data is
provided starting on page 12 that gives the Equivalent
Series Resistance (ESR) for each unit. This allows the
user to calculate the losses for each design/application
and to ensure that they are kept within the permissible
limits. Any questions regarding the suitability of a
capacitor for a particular application may be referred to
RBC Engineers through your RBC sales representative.
General Purpose AC Capacitors
–
Gem III
11
600 Volts AC
Case Style
a
b
A
2.16
1.31
B
2.69
1.56
C
2.91
1.91
D
3.66
1.97
Capacitance
(µ
µµ
µF)
Catalog
Number
Case
Style
Height
C(in.)
UL
Code
1.5 97F8240 A 2.12 P961
2.0 97F8241 A 2.12 P961
2.5 97F8242 A 2.88 P961
3.0 97F8243 A 2.88 P961
4.0 97F8244 A 2.88 P961
5.0 97F8245 A 3.88 P961
6.0 97F8246 A 3.88 P961
7.0 97F8247 A 4.75 P961
8.0 97F8248 A 4.75 P961
10 97F8249 B 3.88 P962
12 97F8250 B 3.88 P962
15 97F8251 B 3.88 P962
18 97F8252 B 4.75 P962
20 97F8253 B 4.75 P962
25 97F8254 C 4.75 P963
30 97F8255 D 3.88 P964
35 97F8256 D 4.75 P964
40 97F8257 D 4.75 P964
45 97F8258 D 4.75 P964
600 Volts AC Nominal
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
*STANDARD RATINGS
Case Style A, B, C and D
* It is RBC’s goal to serve you with the most cost
effective and the highest quality capacitor designs.
Standardization to the catalog type shown is a major
program at RBC.
However, RBC remains sensitive to your needs and
requirements, and will continue to offer the above
ratings (and more) in case configurations to meet your
application (s).
Application Note
12
ERS Values for 97F8200 (600 Volt)
Series.Curves Numbers refer to Graphs
on next Page.
Catalog
Number µ
µµ
µFESR
ohms
Curve
Number
97F8240 1.5 0.1277 1
97F8241 2.0 0.0971 1
97F8242 2.5 0.0984 2
97F8243 3.0 0.0831 2
97F8244 4.0 0.0639 2
97F8245 5.0 0.0723 3
97F8246 6.0 0.0615 3
97F8247 7.0 0.0739 4
97F8248 8.0 0.0657 4
97F8249 10.0 0.0404 4
97F8250 12.0 0.0366 4
97F8251 15.0 0.0309 4
97F8252 18.0 0.0361 5
97F8253 20.0 0.0334 5
97F8254 25.0 0.0294 5
97F8255 30.0 0.0220 5
97F8256 35.0 0.0258 6
97F8257 40.0 0.0240 6
97F8258 45.0 0.0225 6
600 Volts AC Nominal
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
97F8200 Series 600 Volts AC
The 97F8000 series of capacitors on the attached product
sheet may be used in AC applications where the voltage
waveform is non-sinusoidal. This Application Note is provided
to assist in the correct use of the capacitors where higher
frequency harmonic currents are present. If you need further
assistance please contact RBC’s Capacitors Operation through
your normal sales channel.
Higher frequency currents are commonly encountered in the
filter circuits of Static Power Converters. These frequencies
range from 180 to 1500 Hz for a 60 Hz system in various
combinations of the odd harmonics depending on the type of
converter. Generally, there are not significant harmonic
currents above the 25th harmonic.
These capacitors can carry a total current of up to 15 amperes
RMS (fundamental plus harmonics). The Equivalent Series
Resistance (ERS) for each Catalog Number is shown in the
ESR tables on this page. This value may be used to calculate
the expected watts loss for a particular application. The user
must determine the total RMS current (fundamental plus
harmonics) for the application. The watts loss is then
calculated using the equation:
W = I 2 x ESR
Where I = Total RMS current
And ESR= Value from ESR tables.
The calculated watts from this equation must not exceed the
allow
able watts loss shown on the curve corresponding to the
particular capacitor. Two sets of curves are shown, one for
natural circulation and one for forced air circulation.
NOTES
(1) In no case should the total RMS current of 15 amperes
be exceeded for any of these capacitors.
(2) Running the capacitors at case temperatures above 70 ºC
will have a significant effect on expected life. (See chart G-1
on page 14 )
(3) Running the capacitors at voltages above the nominal
rated voltage will also result in significantly reduced life. (See
chart G-2 on page 14)
Allowable Watts Loss
-
97F8200 (600 Volt) Series
13
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Natural Circulation
Maximum Allowable
Watts Loss
Ambient Temperature (ºC) – Natural Circulation
Allowable Watts Loss - 97F8200 (600 Volt) Series
Forced Circulation
Maximum Allowable
Watts Loss
Ambient Temperature (ºC) – Forced Circulation
General Pu
rpose AC Capacitors
–
Gem III
Application Data
14
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Life
Vs
Temperature
%
of Chart G-1
Life
Degrees ˚C
Life
Vs
Voltage
%
of Rated Chart G-2
Life
% of Rated Voltage
General Purpose AC Capacitors
–
Gem III
Application Data 15
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Percent Capacitance Vs Temperature
%
Capacitance Chart E-3
Change
Temperature (Degrees ˚C)
General Purpose AC Capacitors
–
Gem III
(Series Section) 16
SPECIFICATIONS:
Available Capacitance Range: 2 to 45 µF
Capacitance Tolerance: ± 6%
Capacitance Variation with Temperature: See chart E-3 on page 21.
Rated Voltage: See Rating Tables. Rating is the 60Hz RMS voltage for a
sinusoidal waveform. For other waveforms refer to the
Application Note on page 6.
Leakage Current: 30 µA maximum
Frequency: 50/60 Hz. For higher frequencies refer to the Application Note.
Operating Temperature: -40 ˚C to +70 ˚C
Storage Temperature: -40 ˚C to +90 ˚C
Operating Life: 60,000 hours with 94% survival
Dissipation Factor: 0.1% maximum
Case Material/Finish: Unpainted Aluminum
Terminations: 0.250” x 0.031” quick connect blades.
Dielectric Fluid: Dielektrol VI
Internal Protection: UL recognized Pressure Sensitive Interrupter. See Ratings
Table for RBC’s Code Number listed under RBC’s UL. File
E7793 (N). For UL submittals with these capacitors use
the RBC ’Pxxx’ number not the Catalog Number. The
corresponding generic UL designation that includes the
Available Fault Current (AFC) rating is given below. All
these capacitors are capable of interrupting available fault
currents of up to 10,000 amperes.
Case Style RBC Code Generic UL Code
A P851 A10000AFC
B P852 B10000AFC
C P853 C10000AFC
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
660 Volts AC
This series of Gem III is specifically designed for
general-
purpose AC applications in power supplies, UPS
and power conversion equipment. Application Data is
provided that gives the Equivalent Series Resistance
(ESR) for each units. This allows the user to calculate
the losses for each design/application and to ensure
that they are kept within the permissible limits. Any
questions regarding the suitability of a capacitor for a
particular application may be referred to RBC Engineers
through your RBC sales representative.
General Purpose AC Capacitors
–
Gem III
(Series Section) 17
Capacitance
(
µ
µµ
µ
F)
Catalog Number Case Style
Height
C(in.)
UL
Code
ESR
ohms
Curve Number
2
27L6095
A
3.88
P851
0.0971
1
2.5
27L6093
A
3.88
P851
0.0984
2
3
27L6094
A
3.88
P851
0.0831
2
4
27L6012
A
3.88
P851
0.0639
2
5
27L6013
A
3.88
P851
0.0723
2
6
27L6014
A
4.75
P851
0.0615
3
7
27L6015
A
4.75
P851
0.0739
3
8
27L6016
A
4.75
P851
0.0657
4
10
27L6017
B
3.88
P852
0.0404
4
12
27L6018
B
4.75
P852
0.0366
4
15
27L6073
C
4.75
P853
0.0309
4
18
27L6089
D
3.88
P854
0.0361
4
20
27L6082
D
4.75
P854
0.0334
5
25
27L6022
D
4.75
P854
0.0294
5
30
27L6023
D
4.75
P854
0.0220
5
CPD
512
–
03 / 07
www.regalbeloitcapacitors.com
660 Volts AC
2003 Revision
Case Style
a
b
A 2.16 1.31
B 2.69 1.556
C 2.91 1.91
D 3.66 1.97
Application Note
18
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
27L Series 660 Volts AC (series section)
The 27L series of capacitors on the attached product sheet may be used in AC applications where the
voltage waveform is non-sinusoidal. This Application Note is provided to assist in the correct use of the
capacitors where higher frequency harmonic currents are present. If you need further assistance please
contact RBC’s Capacitor’s Operation through your normal sales channel.
Higher frequency currents are commonly encountered in the filter circuits of static Power Converters.
These frequencies range from 180 to 1500 Hz for a 60 Hz system in various combinations of the odd
harmonics depending on the type of converter. Generally, there are not significant harmonic currents
above the 25th harmonic.
These capacitors can carry a total current of up to 15 amperes RMS (fundamental plus harmonics). The
Equivalent Series Resistance (ERS) for each Catalog Number is shown in the ESR tables on this page.
This value may be used to calculate the expected watts loss for a particular application. The user must
determine the total RMS current (fundamental plus harmonics) for the application. The watts loss is then
calculated using the equation:
W = I 2 x ESR
Where I = Total RMS current
And ESR= Value from ESR tables.
The calculated watts from this equation must not exceed the allowable watts loss shown on the curve
corresponding to the particular capacitor. Two sets of curves are shown, one for natural circulation and
one for forced air circulation.
NOTES
(1) In no case should the total RMS current of 15 amperes be exceeded for any of these capacitor
(2)
Running the capacitors at case temperatures above 70 ºC will have a significant effect on expected
life. (See chart G-1 on page 20)
(3) Running the capacitors at voltages above the nominal rated voltage will also result in significantly
reduced life. (See chart G-2 on page 20)
Allowable Watts Loss
-
27L
(660 Volt) Series Section 19
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Natural Circulation
Maximum Allowable
Watts Loss
Ambient Temperature (ºC) – Natural Circulation
Allowable Watts Loss - 27L (660 Volt) Series Section
Forced Circulation
Maximum Allowable
Watts Loss
Ambient Temperature (ºC) – Forced Circulation
General Purpose AC Capacitors
–
Gem III
Application Data
20
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
The above charts are intended as general reference only. Any indication of extended life by
reducing voltage or temperature is in no way a guarantee of extended product life.
General Purpose AC Capacitors
–
Ge
m III
Application Data
21
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Percent Capacitance Vs Temperature
%
of Chart E-3
Capacitance
Temperature (Degrees ˚C)
Capacitance
µ
µµ
µF
Catalog
Number BASE HT
Capacitance
µ
µµ
µ
F
Catalog
Number
BASE HT UL CODE
2.0
61L1271
A
2.12
2.0
27L6095
A
3.88
P851
2.5
61L1280
A
2.88
2.5
27L6093
A
3.88
P851
3.0
61L1272
A
2.88
3.0
27L6094
A
3.88
P851
4.0
61L313
A
2.88
4.0
27L6012
A
3.88
P851
5.0
61L1273
A
3.88
5.0
27L6013
A
3.88
P851
6.0
61L1274
A
3.88
6.0
27L6014
A
4.75
P851
7.0
61L316
A
3.88
7.0
27L6015
A
4.75
P851
8.0
61L1275
A
4.75
8.0
27L6016
A
4.75
P851
10.0
61L1286
B
3.88
10.0
27L6017
B
3.88
P852
12.0
61L1276
B
4.75
12.0
27L6018
B
4.75
P852
15.0
61L1289
B
5.75
15.0
27L6073
C
4.75
P853
18.0
61L1277
B
5.75
18.0
27L6089
D
3.88
P854
20.0
61L322
C
4.75
20.0
27L6082
D
4.75
P854
25.0
61L323
C
5.75
25.0
27L6022
D
4.75
P854
30.0
61L324
D
5.75
30.0
27L6023
D
4.75
P854
Capacitance
µ
µµ
µ
F
Catalog
Number
BASE HT
Capacitance
µ
µµ
µ
F
Catalog
Number
BASE HT UL CODE
2.0
26F6618
A
2.12
2.0
27L6095
A
3.88
P851
2.5
26F6619
A
2.12
2.5
27L6093
A
3.88
P851
3.0
26F6620
A
2.38
3.0
27L6094
A
3.88
P851
4.0
26F6621
A
3.12
4.0
27L6012
A
3.88
P851
5.0
26F6622
A
3.50
5.0
27L6013
A
3.88
P851
6.0
26F6623
A
4.25
6.0
27L6014
A
4.75
P851
7.0
26F6624
A
4.50
7.0
27L6015
A
4.75
P851
8.0
26F6625
A
5.50
8.0
27L6016
A
4.75
P851
10.0
26F6626
C
3.88
10.0
27L6017
B
3.88
P852
12.0
26F6627
C
4.50
12.0
27L6018
B
4.75
P852
15.0
26F6628
C
5.50
15.0
27L6073
C
4.75
P853
18.0
26F6629
C
6.75
18.0
27L6089
D
3.88
P854
20.0
26F6634
D
6.25
20.0
27L6082
D
4.75
P854
25.0
26F6665
D
7.25
25.0
27L6022
D
4.75
P854
30.0
26F6636
D
8.00
30.0
27L6023
D
4.75
P854
GEM II (61L) GEM III SERIES SECTION (27L)
Film/Paper (26F) GEM III SERIES SECTION (27L)
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
27L SERIES OUTLINE
61L SERIES OUTLINE
26F SERIES OUTLINE
A
B
2.16 1.31
2.69 1.56
2.91 1.91
3.66 1.97
0.81
0.81
0.81
Base size
A
B
C
D
Dimensions
D
0.81
CROSS REFERENCE
600 VOLTS AC
26F6600 SERIES & 61L SERIES
to NEW 27L SERIES 660 VAC
22
Dual Rated Cap
acitors
23
1000 Volts Peak
This line of dual Rated AC/DC Capacitors is specifically
designed for applications such as AC/DC filers where
harmonic frequencies greater than 60 Hz are common.
These capacitors are typically used in DC filters at
voltages above those served by electrolytic type
construction.
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
SPECIFICAT
IONS
Available Capacitance Range: 3.0 to 50 µF
Capacitance Tolerance: 97F ± 6%
Capacitance Variation with Temperature: ± 5% from -40 ˚C to +70 ˚C
Rated Voltage: See Rating Tables. Rating is Maximum Peak
DC Voltage.
Ripple Voltage The RMS ripple voltage should not exceed the
following percentages of the rated voltage for
these frequencies:
Frequency % of Rated Voltage
97F
60 Hz 44
120 Hz 30
400 Hz 12
1,000 Hz 8
10,000 Hz 0.6
Operating Temperature: -30 ˚C to +70 ˚C
Storage Temperature: -55 ˚C to +70 ˚C
Operating Life:
60,000 hours with 90% survival with proper derating.
Dissipation Factor: 0.3% maximum
Case Material/Finish: Aluminum Case (NO PAINT)
Terminations: 97F (3) or (4) 0.250” x 0.031”inch quick connect
blades per terminal (see outline drawing).
Dielectric Fluid: 97 F: Dielektrol VI
Internal Protection: Pressure Sensitive Interrupter.
General Purpose DC Capacitors
24
*STANDARD RATINGS
C a p a c ita n c e
(
µ
µµ
µ
F )
C a ta lo g
N u m b e r
C a s e
S ty le
H e ig h t
C (in .)
3 .0
97F5437
A
2 .1 2
4 .0
97F5337
A
2 .8 8
5 .0
97F5339
A
2 .8 8
6 .0
97F5436
A
2 .8 8
7 .5
97F9036
A
3 .8 8
1 0 .0
97F5300
A
3 .8 8
1 2 .5
97F5001
P
2 .8 8
1 5 .0
97F9037
P
2 .8 8
1 7 .5
97F9038
P
3 .8 8
2 0 .0
97F9039
P
3 .8 8
2 5 .0
97F9040
P
4 .7 5
3 0 .0
97F5023
P
4 .7 5
3 5 .0
97F9041
S
4 .7 5
4 0 .0
97F5116
S
4 .7 5
4 5 .0
97F5209
T
3 .8 8
5 0 .0
97F5211
T
3 .8 8
1 0 0 0 V o lts P ea k (4 40 V a c,D u al R a te d )
Case Style
K
J
P
1.75
1.88
S
2.00
2.12
T
2.50
2.62
Case Style A
Case Styles
(97F Series) P, S and T
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
Case
Style
Bracket
Part Number a b c
P 295A6016P31 1.75 1.12 1.31
S 295A6016P32 2.00 1.25 1.44
T 295A6016P33 2.50 1.50 1.69
Case
Style
Bracket
Part Number d e
A 128A2244ACP21 2.69 3.13
B 128A2244ABP25 3.27 3.70
C 128A2244ABP22 3.44 3.88
D 128A2244ABP23 4.19 4.63
Case
Style
Bracket
Part Number d e w t
A K9827065P21 2.56 2.94 0.50 0.02
B K9827065P31 3.06 3.50 0.63 0.02
C 614A301P61 3.31 3.81 0.75 0.03
D 614A301P51 4.06 4.56 0.75 0.03
P 279A7235P24 2.50 2.88 0.75 0.04
S 279A7235P22 2.75 3.12 0.75 0.04
T 279A7235P23 3.25 3.62 0.75 0.04
25
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
UNIVERSAL WRAP AROUND BRACKETS
ROUND CASE STYLES
UNIVERSAL WRAP AROUND BRACKETS
OVAL CASE STYLES
(2) .156 dia holes suplplied with
# 6-32 screw and nut
WRAP AROUND BRACKETS
ROUND AND OVAL CASE STYLES
Mounting Hardware
for GEM III Capacitors
Case
Style
d e
A 2.56 3.00
2.12 302C920P210 B 3.13 3.56
2.88 302C920P113 C 3.38 3.81
3.88 302C920P115 D 4.13 4.56
4.75 302C920P116
5.75 302C920P209 P 2.33 2.76
S 2.57 3.00
T 3.07 3.50
Case
Height
Bracket
Part Number
614A527P21 60 0C
178A3744P21 105 0C
Temperature RatingBoot Part Number
26
CPD 512
–
03 / 07
www.regalbeloitcapacitors.com
FOOTED BRACKETS
.187
PROTECTIVE BOOT PROTECTIVE CAP
Mounting Hardware
for GEM III Capacitors
CPD 512
–
03 / 07
Publication Description Replaces
CPD-510 AC Motor Run Capacitors CPD-501
CPD-511 AC HID Lighting Capacitors CPD-501
CPD-512 General Purpose Capacitors CPD-501
CPD-517 Power Electrolytic Capacitors (General) New Pub.
AVAILABLE
RBC COMPONENT CAPACITOR PUBLICATIONS
Please contact your RBC Sales Representative for further information
Call or write directly to,
GE Capacitors by Regal Beloit
11970 PELLICANO DR. , SUITE 300
EL PASO ,TEXAS 79936
USA
Telephone: (915) 849-5757, (915) 849-5758
Fax: (915) 849-5799