Single Phase PSBT 25 IdAV = 32 A
Full Controlled VRRM = 600-1200V
Rectifier Bridge
Features
•Package with DCB ceramic base plate
•Isolation voltage 3000 V∼
•Planar glass passivated chips
•Low forward voltage drop
•Leads suitable for PC board
soldering
•UL registered, E 148688
Applications
•Supplies for DC power equipment
•Imput rectifier for PWM inverter
•Battery DC power supplies
•Field supply for DC motors
Advantages
•Easy to mount with two screws
•Space and weight savings
•Improved temperature and power
cycling capability
•High power density
•Small and light weight
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 1
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
Symbol Test Conditions Maximum Ratings
I*dAV TC = 85 °C, (per module) 32 A
ITRMS TVJ = TVJM -A
ITAVM TC = 85 °C, 180° sine, per thyristor 16 A
ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 200 A
VR = 0 t = 8.3 ms (60 Hz), sine 210 A
TVJ = TVJM t = 10 ms (50 Hz), sine 180 A
VR = 0 t = 8.3 ms (60 Hz), sine 190 A
∫∫
∫∫
∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 200 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 150 A²s
TVJ = TVJM t = 10 ms (50 Hz), sine 160 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 150 A²s
(di/dt)cr TVJ = TVJM repetitive, IT = 20 A 100 A/µs
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.15 A non repetitive,IT = ITAVM 500 A/µs
diG/dt=0.15A/µs
(dv/dt)cr TVJ = TVJM VD=2/3VDRM 500 V/µs
RGK= ∞, method 1 (linear voltage rise)
PGM TVJ = TVJM tP=30µs ≤ 5 W
IT = ITAVM tP=300µs ≤ 2.5 W
PGAVM 0.5 W
VRGM 10 V
TVJ -40... + 125 °C
TVJM 125 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V∼
IISOL ≤ 1 mA t = 1 s 3000 V∼
MdMounting torque (M4) 1.5 - 1.8 N m
14 - 16 lb.in.
Weight typ. 16 g
*for resistive load at bridge output
Preliminary Data Sheet
VRSM VRRM Type
VDSM VDRM
(V) (V)
700 600 PSBT 25/06
900 800 PSBT 25/08
1300 1200 PSBT 25/12
http://store.iiic.cc/
ECO-PACTM 1
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Symbol Test Conditions Characteristic Value
ID,IRTVJ = TVJM, VR = VRRM, VD=VDRM ≤5mA
VTIT = 20 A, TVJ = 25 °C ≤1.6 V
VTO For power-loss calculations only (TVJ = TVJM)0.85 V
rT27 mΩ
VGT VD = 6V TVJ = 25°C ≤1.5 V
TVJ =-40°C ≤2.5 V
IGT VD = 6V TVJ = 25°C ≤25 mA
TVJ =-40°C ≤50 mA
VGD TVJ= 125°C VD=2/3VDRM ≤0.2 V
IGD TVJ= 125°C VD=2/3VDRM ≤3mA
ILTVJ= 25°C, tP=10µs ≤75 mA
IG=0.1A, diG/dt=0.1A/µs
IHTVJ= 25°C, VD=6V, RGK= ∞≤50 mA
tgd TVJ= 25°C, VD=1/2VDRM ≤2µs
IG=0.1A, diG/dt=0.1A/µs
RthJC per thyristor; DC 1.3 K/W
per module 0.33 K/W
RthJK per thyristor; DC 1.8 K/W
per module 0.45 K/W
dsCreeping distance on surface 11.2 m m
dACreeping distance in air 5.0 m m
aMax. allowable acceleration 50 m/s²
Package style and outline
Dimensions in mm (1mm = 0.0394“)
http://store.iiic.cc/
