139
General
QR/P series connectors have been developed for Plug-
in Connection Power and Signal Circuits in copier
machine or other equipments which impose the con-
nectors repeated insertion and extraction for mainte-
nence work of them Available number of pins are 4, 8,
12, 16, and 24. Wire termination is done by crimping
which offers higher reliability, Especially, the unique
sexless contact assures soft and smooth coupling
operation which is the most appropriate for Plug-in
connection by machine itself.
Features
(1) The selective plating sexless contact is commonly
used for plug and receptacle housings.
(2) As QR/P series are crimp type connectors their hous-
ing and contacts are supplied separately. The sexless
feature of the contact offers customers higer utiliza-
tion and easier inventory control.
(3) The two pairs of contacts at both ends are sequenced
for power circuits. They are longer than the others.
The molding material is UL94V-0 glass-reinforced
polyester.
(4) The Guide Pin is made of steel nickel plated to be
strong enough against accidental coupling shock.
(5) The mount of a receptacle housing is done through
Floating Bushes. Thus, they may help to give
smoother coupling of connectors by a self-adjusting
function.
Applications
Main applications are PPC, Data Communications, Vending Machines, Instrument, Automatic Equipment, etc.
QR/P SERIES PLUG-IN CRIMP CONNECTORS
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
140
Material and Finish
QR/PMainRating
Contactresistance
Insulationresistance
Power
Signal
Power
Signal
Power
Signal
Withstand
voltage
(1min.)
Current
rating
Voltage
rating
10Ω orlessatDC1A
5000MΩ orlessatDC500V
AC3000V
AC1000V
13AMax(AWG#14use)
7AMax(AWG#14use)
AC600V
AC250V
Material
Insulator
Contact
PBT* Blue
Selectivegoldover
NickelPlating
Phosphorbronze
※UL94V-0
Ordering Information
QR/P−8P−C（
01
）
(1) Series Name
(2) No.of Pin 4, 8, 12, 16, 24
(3) Type of Housing
P: Plug Housing
S: Receptacle Housing
(4) Type of Termination
C: Crimping
(5) Sexless Contact
(6) Contact Type
1: Loose Contact
2: Chain Contact
(7) Applicable Wire
1: AWG # 14 - # 16
2: AWG # 18 - # 24
(8) Finish
1: Selective Gold over Nickel plating
(9) UL, CSA, TÜV Approved Spec.
▲Connector Unit
(1) (2) (3) (4) (9)
QR/P−XC−111
▲Contact
(1) (5) (4) (6) (7) (8)
RatingsauthorizedbyQR/Psafetystandards
Standardsafety
operating
temperature
Rated
voltage
Rated
current
Power
Signal
AWG#14
AWG#16
AWG#18
AWG#20
AWG#22
AWG#24
UL CSA TÜV
−10〜＋60℃
AC120V
10A
3A
AC125V
―
5A
3A
2A
1A
AC250V,DC300V
AC125V,DC150V
10A
5A
2.5A
1A
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
141
HRSNo.
CL221-0013-0-01
CL221-0001-0-01
CL221-0002-3-01
CL221-0003-6-01
CL221-0004-9-01
No.ofPin
4
8
12
16
24
PartNo.
QR/P-04P-C（01）
QR/P-08P-C（01）
QR/P-12P-C（01）
QR/P-16P-C（01）
QR/P-24P-C（01）
L
41 31 5 18.5
52 42 5 18.5
61 51 5 18.5
70 60 5 18.5
86.5 77 5.5 18
PHERoHS
○
Plug Housing
HRSNo.
CL221-0014-2-51
CL221-0005-1-51
CL221-0006-4-51
CL221-0007-7-51
CL221-0008-0-51
No.ofPin
4
8
12
16
24
PartNo.
QR/P-04S-C（51）
QR/P-08S-C（51）
QR/P-12S-C（51）
QR/P-16S-C（51）
QR/P-24S-C（51）
L
41 31
52 42
61 51
70 60
86.5 77
PRoHS
○
Receptacle Housing
Unit:mm
Unit:mm
Unit:mm
ApplicableWire
AWG#14−16
AWG#18−24
HRSNo.
CL221-0009-2-12
CL221-0011-4-12
CL221-0010-1-12
CL221-0012-7-12
PartNo. Type Plating
QR/P-XC-111（12）
QR/P-XC-211（12）
QR/P-XC-121（12）
QR/P-XC-221（12）
Loose
Chain
Loose
Chain
Selectivegold
overNickelPlating
RoHS
○
Sexless Crimp Contact
Note* Loose-piece terminals are available in packs. Each pack contains 100 terminals. Strip terminals are available in
reels. Each reel contains QR/P-XC-221 Pin 3,500. QR/P-XC-221 Pin 5,000 terminals.
FloatingBush
MINFloat0.4mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
142
How To Use Connectors
QR/P series connectors are primarily used in Plug-in
Connection and the use is shown below.
Note: Determine the combinations with the panel so
that the mating clearance between the P side
and S side is 2 mm or less.
Recommended Mounting Hole (for S Insulation Case)
Note: Panel mounting dimensins for the P insulation
case are symmetrical with request to the verti-
cal axis, in relation to the S insulation case.
No.ofpin 4
pin 8
pin 12
pin 16
pin 24
pin
Rear
Mount-
ing
Front
Mount-
ing
A
B
C
D
E
F
31 42 51 60 70
26.5 37.5 46.5 55.5 73.5
23 34 43 52 70
18.5 29.5 38.5 47.5 65.5
31 42 51 60 77
15.5 26.5 35.5 44.5 62.5
Tools
Item
HandCrimp
Tool
Applicator
Contact
ExtractionTool
HRSNo.
CL250-0027-0
CL250-0028-2
CL901-2531-8
CL250-0009-8
PartNo. ApplicableContact ApplicableCable
TC-2100-111
TC-2100-121
AP105-QR/P-XC-221
TC-2100-21
QR/P-XC-111
QR/P-XC-121
QR/P-XC-221
――
AWG#14−#16
AWG#18−#24
AWG#18−#24
――
MountPanel
QR/P−｢｣S−C
QR/P−  ｣P−C
QR/P−CX｢」
FloatingBush
(MIN.Float0.4mm)
Max
Hand Crimp Tool Contact Extraction Tool Auto Crimp Tool CM-105
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
143
Assembling Procedure
After assembling, please make
sure if the contact is installed
as shown in the left by pulling
the cable slightly.
Procedure for Contact Extraction
In case of extracting a contact from the housing in insertion
error or in circuit change, follow the steps as shown below.
1. Hold the Contact Extractor, placing the tip of the
Extractor on the tip of a contact, then insert it
between the contact and the housing, following to
the Fig. 1.
2. When the tip of the Extractor comes into contact
with a stepped part in the housing, the spring will
come off from the stepped part with a snap which
is felt. Then, extract the contact by pulling the wire.
3. Above Fig. 1 and Fig. 2 show how to extract a con-
tact from socket housing. The same procedure can
be employed to extract a contact from pin housing.
4. When the extracted contact is installed again in the
housing, do not forget to raise up the contact
spring to the original position.
Fig. 1 Fig. 2
Crimped
Contact
Extrator
Spring
(Pullthewire)
about3.5mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hirose Electric:
QR/P-XC-121(07) WI Crimper 105-QR/P-XC-2 QR/P10-12P-C QR/P10-12S-C QR/P10-32P-C QR/P10-32S-C
QR/P10-14P-C QR/P10-14S-C QR/P14-14P-C QR/P14-14S-C QR/P14-18S-C QR/P14-18P-C QR/P17-10P4SC-
A(51) QR/P17-10S4PC-B(51) QR/P17-14P-A(51) QR/P17-14S-B(51) QR/P17-18S-B(50) QR/P17-18S-B1(50)
QR/P11-8S-C(09) QR/P17A-SCA-211