3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Shielded Controlled Impedance (SCI)
.100″Cable Assemblies
Physical
Electrical
Mechanical
Environmental
(Connector Insulation) Material: Thermoplastic
Flammability: UL 94V-0
(Connector Contact) Material: Beryllium Copper
Plating: 50/50 µ″ Au/Ni (1.27/1.27 µm Au/Ni)
(Connector Shieldbox) Material: Copper Zinc Alloy
Plating: Solderable Nickel
Current Rating: 1 A
Insulation Resistance: >5 x 109 Ω
Withstanding Voltage: 500 V AC
Characteristic Impedance: See cable types
Center Spacing: .100″ (2.54 mm)
Mating Pin Dimensions: .024″ min/.026″ max (0.61 mm/0.665 mm)
Mating Pin Length 20, 21, 22, 23: .23″ nom (5.80 mm); 24: .21″ nom (5.02 mm)
Contact Mating Point 20, 21, 22, 23: .13″ (3.40 mm); 24: .10″ (2.60 mm)
Connector Insertion Force: 2.3 N max [Pin:0.025″ (0.63 mm)]
Connector Withdrawel Force: 1.5 N min [Pin:0.025″ (0.63 mm)]
Cable Retention Force: 50 N min
Durability (Insertion/Withdrawal): 500 cycles
Temperature Rating: 22, 23: -55 to +105°C; 24: -55 to +125°C
TS-0803-05
Sheet 1 of 3
• .100 inch (2.54 mm) center spacing
• Mates with standard 3M two-pin headers
• Supplied as a completed assembly
Stand-Alone version
• Available in right angle and straight
configurations with optional polarization
feature
• Right angle connector has optional two-pin
header latch
Carrier version
• Available only in straight configuration
designed for use with the 3M SCI carrier
system
Date Modified: September 23, 2005
UL File No.: E86982 (Optional)
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Shielded Controlled Impedance (SCI)
.100″Cable Assemblies
Ordering Information
TS-0803-05
Sheet 2 of 3
Left Connector Type/Right Connector Type
22 = Right angle, nonpolarized
23 = Straight, nonpolarized
24 = Carrier version, straight
98XXXX-XXX-XXX.X-X X X USA and Canadian
Certification
Y = Yes
N = No
Cable Type
017 = 50 Ω
027 = 50 Ω Low capacitance
041 = 75 Ω
XXX = For other cable options
contact 3M (if non standard)
Length
(inches)
Ground Pattern
S = Signals as indicated on connector dwg
Z = Customer special ground pattern
(Consult Factory)
Harness Required
A = Multiple Assy's Harnessed
0 = Single Assembly Only
Right Angle Version
Type 22
.063 [ 1.60 ]
.012 [ 0.30 ]
.100 [ 2.54 ]
.039 [ 1.0 ]
.088
[ 2.25 ]
.174 [ 4.43 ]
.472
[ 12.00 ]
Ground
Signal
Connector Types
Stand Alone Version
Type 23
.012 [ 0.30 ]
.039 [ 1.0 ]
.100 [ 2.54 ]
.174 [ 4.43 ]
.088 [ 2.25 ]
.604
[ 15.35 ]
Ground
Signal
Carrier Version
Type 24
.174 [ 4.43 ]
.082
[ 2.08 ]
.100 [ 2.54 ]
.073
[ 1.85 ]
.11 [ 2.80 ]
.604
[ 15.35 ]
Ground
Signal
Inch
[mm]
±.005±.1 ±.01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
Assembly Tolerances:
<10″:±1/4″
10″ to 36″:
±1/2″
36″ to 120″:
±1″
>120″:±2″
Minimum Length:
4.3″
Length
Example Assembly
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Shielded Controlled Impedance (SCI)
.100″Cable Assemblies
Physical Properties (TYP)
Cable Type A
Center Conductor
B
Dielectric Material
C
Shield
D
Jacket
017 50 Ω
± 5 Ω
30 AWG SCCCS Stranded (7/38)
.012″ O.D.
(0.30 mm O.D.)
PTFE
.033″ O.D.
(0.84 mm O.D.)
38 AWG Braid (SPC)
95% nominal coverage
.059″ O.D.
(1.50 mm O.D.)
FEP
Natural Color
.071″ O.D.
(1.80 mm O.D.)
027 50 Ω
± 2 Ω
26 AWG SPC Stranded (7/34)
.019″ O.D.
(0.48 mm O.D.)
AIR/FEP Tube
.044″ O.D.
(1.1 mm O.D.)
38 AWG (SPC)
Double Serve
FEP
Blue Color
.074″ O.D.
(1.88 mm O.D.)
041 75 Ω
± 3 Ω
30 AWG SPC Stranded (7/38)
.012″ O.D.
(0.30 mm O.D.)
FEP (Porous)
.045″ O.D.
(1.14 mm O.D.)
40 AWG Braid (TPC)
90% min coverage
.059″ O.D.
(1.50 mm O.D.)
FEP
Gray Color
.074″ O.D.
(1.88 mm O.D.)
SCCCS = Silver Coated Copper Covered Steel
SPC = Silver Plated Copper
TPC = Tin Plated Copper
Electrical Properties (TYP)
Cable Type Capacitance Propagation Delay Attenuation Conductor Resistance
017 50 Ω
± 5 Ω
32 pf/ft max
(105 pf/m)
1.46 ns/ft nominal
(4.8 ns/m )
33 dB Max/100 ft @ 400 MHz
(108 dB/ 100 m)
.24 Ω/ft at 68°F
(0.8 Ω/m at 20°C)
027 50 Ω
± 2 Ω
23 pf/ft nom
(75 pf/m)
1.15 ns/ft nominal
(3.77 ns/m )
20 dB /100ft @ 400 MHz Nom
(65 dB/100 m)
.041 Ω/ft at 68°F
(.15 Ω/m at 20°C)
041 75 Ω
± 3 Ω
16 pf/ft max
(52 pf/m)
1.22 ns/ft nominal
(4.0 ns/m )
10 dB Max/100 ft @ 100 MHz
(33 dB/100 m)
.09 Ω/ft at 68°F
(0.3 Ω/m at 20°C)
Cable Specification
A
B
C
D
B
A
C
D
TS-0803-05
Sheet 3 of 3
3
Printed in USA.
© 3M 2005
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/328-1368
www.3M.com/electronics
