FDS8984-F085 N-Channel PowerTrench® MOSFET
©2010 Semiconductor Components Industries, LLC.
September-2017, Rev. 1
Publication Order Number:
FDS8984-F085/D
1
FDS8984-F085
N-Channel PowerTrench® MOSFET
30V, 7A, 23mΩ
General Description
This N-Channel MOSFET has been designed specifically to
improve the overall efficiency of DC/DC converters using
either synchronous or conventional switching PWM
controllers. It has been optimized for low gate charge, low
rDS(ON) and fast switching speed.
Features
Max rDS(on) = 23mΩ, VGS = 10V, ID = 7A
Max rDS(on) = 30mΩ, VGS = 4.5V, ID = 6A
Low gate charge
100% RG tested
Qualified to AEC Q101
MOSFET Maximum Ratings TA = 25°C unless otherwise noted
Thermal Characteristics
Package Marking and Ordering Information
Symbol Parameter Ratings Units
VDS Drain to Source Voltage 30 V
VGS Gate to Source Voltage ±20 V
ID
Drain Current Continuous (Note 1a) 7 A
Pulsed 30 A
EAS Single Pulse Avalache Energy (Note 2) 32 mJ
PD
Power Dissipation for Single Operation 1.6 W
Derate above 25°C 13 mW/°C
TJ, TSTG Operating and Storage Temperature -55 to 150 °C
RθJA Thermal Resistance, Junction-to-Ambient (Note 1a) 78 °C/W
RθJC Thermal Resistance, Junction-to-Case (Note 1) 40 °C/W
Device Marking Device Package Reel Size Tape Width Quantity
FDS8984 FDS8984-F085 SO-8 330mm 12mm 2500 units
3
6
4
7
8
2
5
1
Q2
Q1
S
D
S
S
SO-8
D
D
D
G
D1
D1
D2 D2
S1G1S2G2
Pin 1
SO-8
RoHS Compliant
FDS8984-F085 N-Channel PowerTrench® MOSFET
www.onsemi.com
2
Electrical Characteristics TJ = 25°C unless otherwise noted
Off Characteristics
On Characteristics (Note 3)
Dynamic Characteristics
Switching Characteristics (Note 3)
Drain-Source Diode Characteristics
Symbol Parameter Test Conditions Min Typ Max Units
BVDSS Drain to Source Breakdown Voltage ID = 250µA, VGS = 0V 30 V
∆BVDSS
∆TJ
Breakdown Voltage Temperature
Coefficient
ID = 250µA, referenced to
25°C 23 mV/°C
IDSS Zero Gate Voltage Drain Current VDS = 24V
VGS = 0V
1µA
TJ = 125°C 250
IGSS Gate to Source Leakage Current VGS = ±20V,VDS = 0V ±100 nA
VGS(th) Gate to Source Threshold Voltage VDS = VGS, ID = 250µA 1.2 1.7 2.5 V
∆VGS(th)
∆TJ
Gate to Source Threshold Voltage
Temperature Coefficient
ID = 250µA, referenced to
25°C - 4.3 mV/°C
rDS(on) Drain to Source On Resistance
VGS = 10V, ID = 7A 19 23
mΩ
VGS = 4.5V, ID = 6A 24 30
VGS = 10V, ID = 7A,
TJ = 125°C 26 32
Ciss Input Capacitance VDS = 15V, VGS = 0V,
f = 1.0MHz
475 635 pF
Coss Output Capacitance 100 135 pF
Crss Reverse Transfer Capacitance 65 100 pF
RGGate Resistance f = 1MHz 0.9 1.6 Ω
td(on) Turn-On Delay Time
VDD = 15V, ID = 7A
VGS = 10V, RGS = 33Ω
510ns
trRise Time 918ns
td(off) Turn-Off Delay Time 42 68 ns
tfFall Time 21 34 ns
QgTotal Gate Charge VDS = 15V, VGS = 10V,
ID = 7A 9.2 13 nC
QgTotal Gate Charge VDS = 15V, VGS = 5V,
ID = 7A
5.0 7 nC
Qgs Gate to Source Gate Charge 1.5 nC
Qgd Gate to Drain “Miller” Charge 2.0 nC
VSD Source to Drain Diode Voltage ISD = 7A 0.9 1.25 V
ISD = 2.1A 0.8 1.0 V
trr Diode Reverse Recovery Time IF = 7A, di/dt = 100A/µs33 ns
Qrr Diode Reverse Recovery Charge 20 nC
Notes:
1: RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of
the drain pins. RθJC is guaranteed by design while RθCA is determined by the user’s board design.
Scale 1 : 1 on letter size paper
2: Starting TJ = 25°C, L = 1mH, IAS = 8A, VDD = 27V, VGS = 10V.
3: Pulse Test:Pulse Width <300µs, Duty Cycle <2%.
c) 135°C/W when
mounted on a
minimun pad
b) 125°C/W when
mounted on a 0.02 in2
pad of oz copper
a) 78°C/W when
mounted on a 0.5in2
pad of 2 oz copper
FDS8984-F085 N-Channel PowerTrench® MOSFET
Typical Characteristics TJ = 25°C unless otherwise noted
Figure 1.
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
0
10
20
30
VGS=10V
VGS=5.0V
VGS=4.5V
VGS=4.0V
VGS=3.5V
VGS=3.0V
PULSE DURATION =80µS
DUTY CYCLE =0.5% MAX
ID, DRAIN CURRENT (A)
VDS, DRAIN-SOURCE VOLTAGE (V)
On Region Characteristics Figure 2.
5 1015202530
0.5
1.0
1.5
2.0
2.5
3.0
PULSE DURATION =80µS
DUTY CYCLE =0.5% MAX
VGS=3.5V
VGS=4.0V VGS=4.5V
VGS=5.0V VGS=10V
VGS=3.0V
RDS(ON), NORMALIZED
DRAIN-SOURCE ON-RESISTANCE
ID, DRAIN CURRENT (A)
On-Resistance vs Drain Current and
Gate Voltage
Figure 3.
-80 -40 0 40 80 120 160
0.6
0.8
1.0
1.2
1.4
1.6
ID = 7A
VGS = 10V
TJ, JUNCTION TEMPERATURE (oC)
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
On Resistance vs Temperature Figure 4.
246810
15
20
25
30
35
40
45
50
55
60
PULSE DURATION = 80µs
DUTY CYCLE = 0.5%MAX
TJ = 125oC
TJ = 25oC
ID = 7A
RDS(on), DRAIN TO
SOURCE ON-RESISTANCE (mOHM)
VGS, GATE TO SOURCE VOLTAGE (V)
On-Resistance vs Gate to Source
Votlage
Figure 5.
1234
0
5
10
15
20
25
30
PULSE DURATION =80µS
DUTY CYCLE =0.5% MAX
TJ = - 55OC
TJ = 25OC
TJ = 150OC
VDD = 5V
ID, DRAIN CURRENT (A)
VGS, GATE TO SOURCE VOLTAGE (V)
Transfer Characteristics Figure 6.
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
1E-3
0.01
0.1
1
10
VSD, BODY DIODE FORWARD VOLTAGE (V)
IS, REVERSE DRAIN CURRENT (A)
TJ = -55oC
TJ = 25oC
TJ = 150oC
VGS = 0V
30
Source to Drain Diode Forward Voltage
vs Source Current
www.onsemi.com
3
FDS8984-F085 N-Channel PowerTrench® MOSFET
Figure 7. Gate Charge Characteri
0246810
0
2
4
6
8
10
VDD = 20V
VDD = 10V
VGS, GATE TO SOURCE VOLTAGE(V)
Qg, GATE CHARGE(nC)
VDD = 15V
stics Figure 8. Capacitance vs Drain to Source Voltage
0.1 1 10
100
200
300
400
500
600
700
CRSS
COSS
CISS
f = 1MHz
VGS = 0V
CAPACITANCE (pF)
VDS, DRAIN TO SOURCE VOLTAGE (V)
30
Figure 9. Unclamped Inductive Switching
Capability
0.01 0.1 1 10
1
10
20
STARTING TJ = 125OC
STARTING TJ = 25OC
IAS, AVALANCHE CURRENT (A)
tAV, TIME IN AVALANCHE (mS)
20
Figure 10. Maximum Continuous Drain Current vs
Ambient Temperature
25 50 75 100 125 150
0
1
2
3
4
5
6
7
8
VGS=4.5V
VGS=10V
ID, DRAIN CURRENT (A)
TA, AMBIENT TEMPERATURE (oC)
Figure 11. Forward Bias Safe Operating Area
0.1 1 10 100
0.01
0.1
1
10
100
DC
1s
100ms
10ms
1ms
100us
10us
ID, DRAIN CURRENT (A)
VDS, DRAIN TO SOURCE VOLTAGE (V)
OPERATION IN THIS
AREA MAY BE
LIMITED BY rDS(on)
SINGLE PULSE
TJ = MAX RATED
TA = 25oC
Figure 12. Single Pulse Maximum Power
Dissipation
10-5 10-4 10-3 10-2 10-1 100101102103
1
10
100
1000
VGS=10V
SINGLE PULSE
t, PULSE WIDTH (s)
P(PK), PEAK TRANSIENT POWER (W)
3000
T
A
= 25
o
C
I = I
25
FOR TEMPERATURES
ABOVE 25
o
C DERATE PEAK
CURRENT AS FOLLOWS:
150 TA
–
125
------------------------
Typical Characteristics TJ = 25°C unless otherwise noted
www.onsemi.com
4
FDS8984-F085 N-Channel PowerTrench® MOSFET
Figure 13. Transient Thermal Response Curve
10-5 10-4 10-3 10-2 10-1 100101102103
1E-4
1E-3
0.01
0.1
1DUTY CYCLE - DESCENDING ORDER
Normalized Thermal
Impedance ZθJA
t, RECTANGULAR PULSE DURATION(s)
D = 0.5
0.2
0.1
0.05
0.02
0.01
SINGLE PULSE
2
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + TA
PDM
t1
t2
Typical Characteristics TJ = 25°C unless otherwise noted
www.onsemi.com
5
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
❖
