FL MC 10/100BASE-T/FO G1300 Order No.: 2708164
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2708164
PHOENIX CONTACT Deutschland GmbH Page 2 / 5
http://www.phoenixcontact.de Feb 4, 2011
Auto-negotiation modes Optionally transparent via TP and FO (default) or locally on TP
Link through Link down is automatically forwarded to the second connection
MDI-/MDI-X switchover Built-in switch for line (1:1) and crossover connection
Signal LEDs Activity (yellow), Link status (green), 100 Mbps (green)
Serial transmission speed 10/100 Mbps
Optical interface FO
Transmit capacity, minimum min. -23.5 dBm ((50/125 µm) dynamic in link mode (average))
min. -20 dBm ((62,5/125 µm) dynamic in link mode (average))
min. -20.5 dBm ((50/125 µm) static)
min. -17 dBm ((62,5/125 µm) static)
Transmit capacity, maximum max. -14 dBm ((50/125 µm) dynamic in link mode (average))
max. -14 dBm ((62,5/125 µm) dynamic in link mode (average))
max. -11 dBm ((50/125 µm) static)
max. -11 dBm ((62,5/125 µm) static)
Minimum receiver sensitivity min. -31.00 dBm (dynamic in link mode (average))
min. -28.00 dBm (static)
Wavelength 1300 nm
Transmission length incl. 3 dB system reserve 6.4 km (with F-G 50/125 0,7 dB/km F 1200)
2.8 km (with F-G 50/125 1,6 dB/km F 800)
10 km (with F-G 62,5/125 0,7 dB/km F 1000)
3 km (with F-G 62.5/125 2.6 dB/km F 600)
2 km (with 2GK200/230 GI-HCS)
Type of connection SC duplex
Power supply
Nominal supply voltage 24 V DC ±20 % (via pluggable COMBICON screw terminal block)
24 V DC ±5% (as an alternative or redundant, via backplane bus
contact and system current supply)
Typical current consumption ≤ 95 mA (24 V DC)
Protective circuit Protection against polarity reversal
Type of connection Plug-in screw terminal block (COMBICON), redundancy possible
General data
Width 22.5 mm
Height 99 mm
Depth 114.5 mm