40 SERIES Miniature PCB relays (R) The power in relays and timers since 1954 40 Series - Miniature PCB relays 8 - 10 - 16 A Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31 - 1 Pole 10 A (3.5 mm pin pitch) 40.51 - 1 Pole 10 A (5 mm pin pitch) 40.52 - 2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail mount - via screw and screwless sockets 3.5 mm contact pin pitch 1 Pole 10 A * PCB or 95 series sockets 5 mm contact pin pitch 1 Pole 10 A * PCB or 95 series sockets * * * * * A1 12 12 14 14 12 A1 12 14 14 11 A1 3.5 12 11 14 A2 22 21 24 12 14 22 24 11 A2 A1 A2 11 5 5 1.5 7.5 = = 7.5 12.4 1.5 A2 5 5 = 12.4 7.5 3 20 29 6 = 6 20 29 21 A1 = 1.5 25 3 3 20 29 6 1 5 0.4 A2 3.5 12.4 A1 11 (21) 11 A2 29 5 mm contact pin pitch 2 Pole 8 A * PCB or 95 series sockets * 12.4 coils (standard or sensitive) & AC coils * Cadmium Free contact material * 8 mm, 6 kV (1.2/50 s) isolation, coil-contacts * UL Listed (certain relay/socket combinations) * Flux proof: RT II standard, (RT III option) * 95 series sockets, coil EMC suppression and timer accessories = * DC Copper side view Copper side view Copper side view 1 CO (SPDT) 1 CO (SPDT) 2 CO (DPDT) Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC Rated load AC1 VA Rated load AC15 (230 V AC) Single phase motor rating (230 V AC) Breaking capacity DC1: 30/110/220 V Minimum switching load 10/20 10/20 8/15 250/400 250/400 250/250 2,500 2,500 2,000 VA 500 500 400 kW 0.37 0.37 0.3 10/0.3/0.12 10/0.3/0.12 8/0.3/0.12 300 (5/5) 300 (5/5) 300 (5/5) AgNi AgNi AgNi A mW (V/mA) Standard contact material Coil specification Nominal voltage (UN) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 V AC (50/60 Hz) V DC Rated power AC/DC/sens. DC 5 - 6 - 7 - 9 - 12 - 14 - 18 - 21 - 24 - 28 - 36 - 48 - 60 - 90 - 110 - 125 VA (50 Hz)/W/W 1.2/0.65/0.5 1.2/0.65/0.5 1.2/0.65/0.5 AC (0.8...1.1)UN (0.8...1.1)UN (0.8...1.1)UN Operating range (0.73...1.5)UN/(0.73...1.75)UN (0.73...1.5)UN/(0.73...1.75)UN Holding voltage DC/sens. DC (0.73...1.5)UN/(0.73...1.75)UN AC/DC 0.8 UN /0.4 UN 0.8 UN /0.4 UN 0.8 UN /0.4 UN Must drop-out voltage AC/DC 0.2 UN /0.1 UN 0.2 UN /0.1 UN 0.2 UN /0.1 UN Technical data Mechanical life AC/DC cycles 10 * 106/20 * 106 10 * 106/20 * 106 10 * 106/20 * 106 Electrical life at rated load AC1 cycles 200 * 103 200 * 103 100 * 103 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive) 7/3 - (12/4 sensitive) 6 (8 mm) 6 (8 mm) 6 (8 mm) 1,000 1,000 1,000 -40...+85 -40...+85 -40...+85 RT II RT II RT II Operate/release time ms Insulation between coil and contacts (1.2/50 s) kV Dielectric strength between open contacts Ambient temperature range Envirommental protection Approvals (according to type) 2 V AC C 40 Series - Miniature PCB relays 8 - 10 - 16 A Features 40.61 40.xx.6 40.61 - 1 Pole 16 A (5 mm pin pitch) 40.xx.6 - Bistable versions of the 40.31, 40.51, 40.52 & 40.61 relays PCB mount - direct or via PCB socket 35 mm rail mount - via screw and screwless sockets * DC coils & AC coils Free option available * 8 mm, 6 kV (1.2/50 s) isolation, coil-contacts * UL Listed (certain 40.61 relay/socket combinations) * Flux proof: RT II standard, (RT III option) * 95 series sockets, coil suppression and timer accessories * Cadmium 5 mm contact pin pitch 1 Pole 16 A * PCB or 95 series sockets * * A1 12 11 14 A2 22 21 24 (22) 12 14 (24) Bistable version (1 coil) types: 11 (21) 40.31.6... A2 40.51.6... A1 12.4 29 40.52.6... 3 * With the AgSnO2 material the maximum peak current is 120 A - 5 ms on normally open contact. 20 29 = 6 = 1.5 5 1 12.4 For wiring diagrams see 25 40.61.6... 7.5 5 5 0.4 Bistable (single coil) versions of 40.31/51/52/61 * PCB or 95 series sockets * page 8 Copper side view Contact specification 1 CO (SPDT) Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC 16/30* 250/400 See relays Rated load AC1 VA 4,000 40.31 Rated load AC15 (230 V AC) VA 750 40.51 0.55 40.52 16/0.3/0.12 40.61 Single phase motor rating (230 V AC) kW Breaking capacity DC1: 30/110/220 V Minimum switching load A mW (V/mA) 500 (10/5) AgCdO Standard contact material Coil specification Nominal voltage (UN) V AC (50/60 Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 V DC Rated power AC/DC/sens. DC **See below 5 - 6 - 12 - 24 - 48 - 110 5 - 6 - 12 - 24 - 48 - 110 VA (50 Hz)/W/W 1.2/0.65/0.5 1.0/1.0/-- AC (0.8...1.1)UN (0.8...1.1)UN Operating range (0.73...1.5)UN/(0.8...1.5)UN (0.8...1.1)UN/-- Holding voltage AC/DC 0.8 UN /0.4 UN -- Must drop-out voltage AC/DC 0.2 UN /0.1 UN -- DC/sens. DC ** Nominal voltage (UN): 5 - 6 - 7 - 9 - 12 - 14 - 18 - 21 24 - 28 - 36 - 48 - 60 - 90 110 - 125 V DC Technical data Mechanical life AC/DC cycles 10 * 106/20 * 106 See relays Electrical life at rated load AC1 cycles 100 * 103 40.31 Operate/release time ms Insulation between coil and contacts (1.2/50 s) kV Dielectric strength between open contacts Ambient temperature range Envirommental protection V AC C 7/3 - (12/4 sensitive) 40.51 6 (8 mm) 40.52 1,000 40.61 -40...+85 Min. impulse duration RT II 20 ms Approvals (according to type) 3 40 Series - Miniature PCB relays 8 - 10 - 16 A Features 40.11 40.11-2016 40.41 1 Pole relay range 40.11 - 1 Pole 10 A (Flat pack) 40.11-2016 - 1 Pole 16 A (Flat pack) 40.41 - 1 Pole 10 A (Vertical) PCB mount - direct or via PCB socket (40.41 version) coils 1 Pole 10 A Flat pack * PCB mount 1 Pole 16 A Flat pack * PCB mount * * * * * 11 A2 12 14 1.3 3.5 3.5 A1 12 14 11 A1 A2 28.5 20 3.5 3.5 1.5 1.3 3.5 A2 = A1 2.9 7.5 18 26.3 3.3 26.7 A2 28.5 20 2.9 12 14 14 11 7.5 4 40.11 12.3 A1 12 14 12 11 18 12.7 3.5 A1 A2 1 28.5 12 14 11 26.3 A1 0.5 11 7.5 A2 28.5 1 Pole 10 A Vertical * PCB or 95 series socket * 3 20 28.5 6 12.3 Free option available mm, 6 kV (1.2/50 s) isolation, coil-contacts * 40.41 - NO version available *8 = * Cadmium 26.3 3.3 * DC 3.5 4 40.41 0.4 1 Copper side view Copper side view Copper side view 1 CO (SPDT) 1 CO (SPDT) 1 CO (SPDT) Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC 10/20 16/30 10/20 250/400 250/400 250/400 Rated load AC1 VA 2,500 4,000 2,500 Rated load AC15 (230 V AC) VA 500 750 500 Single phase motor rating (230 V AC) kW Breaking capacity DC1: 30/110/220 V Minimum switching load A mW (V/mA) Standard contact material 0.37 0.55 0.37 10/0.3/0.12 16/0.3/0.12 10/0.3/0.12 300 (5/5) 500 (10/5) 300 (5/5) AgCdO AgCdO AgCdO Coil specification Nominal voltage (UN) V AC (50/60 Hz) V DC Rated power AC/DC/sens. DC VA (50 Hz)/W/W Operating range AC -- -- -- 6 - 12 - 24 - 48 - 60 6 - 12 - 24 - 48 6 - 12 - 24 - 48 - 60 --/--/0.5 --/--/0.5 --/--/0.5 -- -- -- --/(0.73...1.75)UN --/(0.73...1.5)UN --/(0.73...1.75)UN Holding voltage AC/DC --/0.4 UN --/0.4 UN --/0.4 UN Must drop-out voltage AC/DC --/0.1 UN --/0.1 UN --/0.1 UN Mechanical life AC/DC cycles --/20 * 106 --/20 * 106 --/20 * 106 Electrical life at rated load AC1 cycles 200 * 103 50 * 103 200 * 103 DC/sens. DC Technical data Operate/release time ms Insulation between coil and contacts (1.2/50 s) kV Dielectric strength between open contacts Ambient temperature range Envirommental protection Approvals (according to type) 4 V AC C 12/4 12/4 12/4 6 (8 mm) 6 (8 mm) 6 (8 mm) 1,000 1,000 1,000 -40...+70 -40...+70 -40...+70 RT I RT I RT I 40 Series - Miniature PCB relays 8 - 10 - 16 A Ordering information Example: 40 series PCB relay, 2 CO (DPDT), 230 V AC coil. A 4 0 . 5 2 . 8 . 2 3 0 . 0 - C D 0 0 0 A: Contact material 0 = Standard AgNi for 40.31/51/52, AgCdO for 40.61 1 = AgNi 2 = AgCdO (standard for 40.11/41) 4 = AgSnO2 5 = AgNi + Au (5 m) Series Type 1 = PCB 3 = PCB 4 = PCB 5 = PCB 6 = PCB B 3.5 mm pinning, flat 3.5 mm pinning 3.5 mm pinning 5 mm pinning 5 mm pinning No. of poles 1 = 1 pole for: 40.11, 10 A/16 A 40.31, 10 A 40.41, 10 A 40.51, 10 A 40.61, 16 A 2 = 2 pole for 40.52, 8 A D: Special versions 0 = Standard 1 = Wash tight (RT III) 3 = High temperature (+ 125 C) wash tight C: Options 0 = None 16 = With rated current 16 A (for 40.11) B: Contact circuit 0 = CO (nPDT) 3 = NO (nPST) Selecting features and options: only combinations in the same row are possible. Preferred selections for best avaliability are shown in bold. Type 40.11 40.11 40.41 40.31/51 40.31/51 40.52 40.52 40.61 40.61 40.31/51/ 52/61 Coil version 6 = AC/DC bistable 7 = Sensitive DC 8 = AC (50/60 Hz) 9 = DC Coil voltage see coil specifications coil version sens. DC sens. DC sens. DC AC-sens. DC DC AC-sens. DC DC AC-sens. DC DC bistable A 2-4 2-4 1-2 0-20-20-20-20-4 0-4 0 5 5 5 5 B 0 0 0 0 0 0 0 0 0 0 - C 0 16 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 D 0 / 0 0 0 0 0 0 0 0 - 1 1-3 1 1-3 1 1-3 Technical data Insulation Insulation according to EN 61810-1 ed. 2 1 Pole insulation rated voltage 2 Pole 400 250 kV 4 4 4 pollution degree 3 2 2 overvoltage category III III III rated impulse withstand voltage Insulation between coil and contacts (1.2/50 s) V 250 kV 6 (8 mm) Dielectric strength between open contacts V AC 1,000 Dielectric strength between adjacent contacts V AC 2,000 Conducted disturbance immunity Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV) Surge (1.2/50 s) on A1 - A2 (differential mode) EN 61000-4-5 level 3 (2 kV) Other data Bounce time: NO/NC ms 2/5 Vibration resistance (5...55)Hz, max. 1 mm: NO/NC Shock resistance Power lost to the environment g/g 10/4 (1 changeover) 15/3 (2 changeover) g 13 without contact current W 0.6 with rated current W 1.2 (40.11/31/41/51) Recommended distance between relays mounted on PCB 2 (40.61/52/40.11-2016) mm 5 5 40 Series - Miniature PCB relays 8 - 10 - 16 A Contact specification F 40 - Electrical life (AC) v contact current Types 40.31/51/61 F 40 - Electrical life (AC) v contact current Types 40.52 7 7 10 Resistive load - cos = 1 Inductive load - cos = 0.4 6 Cycles Cycles 10 10 Resistive load - cos = 1 Inductive load - cos = 0.4 6 10 limit for 40.31/51 5 5 10 10 0 4 8 12 0 16 (A) F 40 - Electrical life (AC) v contact current Types 40.11/41 7 Cycles DC breaking current (A) 20 Resistive load - cos = 1 Inductive load - cos = 0.4 6 6 8 (A) H 40 - Maximum DC1 breaking capacity 10 10 4 2 5 10 10 6 4 40.61 current limit 40.11/31/41/51 current limit 40.52 current limit 2 40.52 - 2 contacts in series 1 single contact 0.2 0.1 4 10 0 4 8 12 16 (A) 20 60 100 140 180 220 DC voltage (V) * When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of 100*103 can be expected. * In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 6 40 Series - Miniature PCB relays 8 - 10 - 16 A Coil specifications DC coil data (0.65 W standard, types 40.31/51/52/61) Nominal voltage UN V 5 6 7 9 12 14 18 21 24 28 36 48 60 90 110 125 Coil code 9.005 9.006 9.007 9.009 9.012 9.014 9.018 9.021 9.024 9.028 9.036 9.048 9.060 9.090 9.110 9.125 Operating range Umin V 3.65 4.4 5.1 6.6 8.8 10.2 13.1 15.3 17.5 20.5 26.3 35 43.8 65.7 80.3 91.2 Umax V 7.5 9 10.5 13.5 18 21 27 31.5 36 42 54 72 90 135 165 187.5 Resistance Rated coil consumption R I at UN mA 38 130 55 109 75 94 125 72 220 55 300 47 500 36 700 30 900 27 1,200 23 2,000 18 3,500 14 5,500 11 12,500 7.2 18,000 6.2 23,500 5.3 DC coil data (0.5 W sensitive, types 40.31/51/52/61) Nominal voltage UN V 5 6 7 9 12 14 18 21 24 28 36 48 60 90 110 125 Coil code Operating range Umin* V 3.7 4.4 5.1 6.6 8.8 10.2 13.2 15.4 17.5 20.5 26.3 35 43.8 65.7 80.3 91.2 7.005 7.006 7.007 7.009 7.012 7.014 7.018 7.021 7.024 7.028 7.036 7.048 7.060 7.090 7.110 7.125 *Umin = 0.8 UN for 40.61 Umax** V 8.8 10.5 12.2 15.8 21 24.5 31.5 36.9 42 49 63 84 105 157 192 218.7 Resistance Rated coil consumption R I at UN mA 50 100 75 80 100 70 160 56 300 40 400 35 650 27.7 900 23.4 1,200 20 1,600 17.5 2,600 13.8 4,800 10 7,200 8.4 16,200 5.6 23,500 4.7 32,000 3.9 **Umax = 1.5 UN for 40.61 DC coil data (0.5 W sensitive, types 40.11/41) Nominal voltage UN V 6 12 24 48 60 Coil code 7.006 7.012 7.024 7.048 7.060 Operating range Umin V 4.4 8.8 17.5 35 43.8 Umax* V 10.5 21 42 84 105 Resistance Rated coil consumption R I at UN mA 75 80 300 40 1,200 20 4,600 10.4 7,200 8.3 *Umax = 1.5 UN for 40.11-2016 AC coil data, types 40.31/51/52/61 Nominal voltage UN V 6 12 24 48 60 110 120 230 240 Coil code 8.006 8.012 8.024 8.048 8.060 8.110 8.120 8.230 8.240 AC/DC coil data (bistable, types 40.31/51/52/61) Operating range Umin V 4.8 9.6 19.2 38.4 48 88 96 184 192 Umax V 6.6 13.2 26.4 52.8 66 121 132 253 264 Resistance Rated coil consumption R I at UN (50Hz) mA 21 168 80 90 320 45 1,350 21 2,100 16.8 6,900 9.4 9,000 8.4 28,000 5 31,500 4.1 Nominal voltage UN V 5 6 12 24 48 110 Coil code 6.005 6.006 6.012 6.024 6.048 6.110 Operating range Umin V 4 4.8 9.6 19.2 38.4 88 Umax V 5.5 6.6 13.2 26.4 52.8 121 Resistance Rated coil DC: Release consumption resistance** R I at UN RDC mA 23 215 37 33 165 62 130 83 220 520 40 910 2,100 21 3,600 11,000 10 16,500 ** RDC = Resistance in DC, RAC = 1.3 x RDC 1W 7 40 Series - Miniature PCB relays 8 - 10 - 16 A Coil specifications R 40 - DC coil operating range v ambient temperature Standard coil R 40 - DC coil operating range v ambient temperature Sensitive coil, types 40.31/51/52/61 U 2.0 UN U 2.0 UN 1 40.61 1.5 1 1.5 40.31/51/52 1.0 1.0 2 2 40.61 40.31/51/52 0.5 -20 0 20 40 60 80 (C) R 40 - DC coil operating range v ambient temperature Sensitive coil, types 40.11/41 U 2.0 UN 40.11-2016 1 0.5 -20 0 20 40 60 80 (C) R 40 - AC coil operating range v ambient temperature 40.11/41 1.5 U 2.0 UN 1.5 1 1.0 1.0 2 0.5 -20 0 20 40 60 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 80 (C) 2 0.5 -20 0 20 40 60 80 (C) 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. Wiring diagram for 40 series bistable coil version AC Operation DC Operation RAC ~ 1.3 * RDC D = 1N4007 set set D reset reset V DC V AC RDC RAC On momentary closure of the SET switch the relay is magnetised through On momentary closure of the SET switch the relay is magnetised and the the diode and the relay contacts transfer to the set position and remain in relay contacts transfer to the set position and remain in this position. On momentary closure of the RESET switch the relay is demagnetised this position. On momentary closure of the RESET switch the relay is demagnetised through limiting resistor (R DC) and the contacts return to the reset through limiting resistor (R AC) and the contacts return to the position. reset position. Notes: The minimum SET or RESET impulse time is 20 ms. The maximum time can be continuous. In practice, always ensure that the SET and RESET contacts cannot be operated simultaneously. 8 95 Series - Socket overview for 40 series relays 95.05 Module Socket Relay 99.02 95.03 40.31 95.05 40.51 40.52 40.61 Description Screw terminal (Box clamp) socket Top terminals - Contacts Bottom terminals - Coil Mounting Panel or 35 mm rail (EN 50022) mount Accessories - Coil indication and EMC suppression modules - Jumper link - Timer Modules - Plastic retaining and release clip Module Socket Relay 99.80 95.83.3 40.31 95.85.3 40.51 40.52 40.62 Description Screw terminal (Box clamp) socket 95.83.3 wiring: Top terminals - Contacts Bottom terminals - Coil Mounting Panel or 35 mm rail (EN 50022) mount Accessories - Coil indication and EMC suppression modules - Jumper link - Plastic retaining and release clip Module Socket Relay 99.80 95.93.3 40.31 95.95.3 40.51 40.52 40.61 Description Screw terminal (Box clamp) socket Top terminals - Contacts Bottom terminals - Coil Mounting Panel or 35 mm rail (EN 50022) mount Accessories - Coil indication and EMC suppression modules - Jumper link - Plastic retaining and release clip Module Socket Relay 99.02 95.55 40.51 40.52 40.61 Description Screwless terminal socket For fast cable connections Top terminals - Contacts Bottom terminals - Coil Mounting Panel or 35 mm rail (EN 50022) mount Accessories - Coil indication and EMC suppression modules - Timer Modules - Plastic retaining and release clip Module Socket Relay 99.80 95.55.3 40.51 40.52 40.61 Description Screwless terminal socket For fast cable connections Top terminals - Contacts Bottom terminals - Coil Mounting Panel or 35 mm rail (EN 50022) mount Accessories - Coil indication and EMC suppression modules - Plastic retaining and release clip Mounting PCB mounting Accessories - Metal retaining clip - Plastic retaining clip See page 10 95.85.3 See page 11 95.95.3 See page 12 95.55 See page 13 95.55.3 See page 14 95.13.2 See page 15 Module Socket Relay Description -- 95.13.2 40.31 PCB socket 40.41 -- 95.15.2 40.51 40.52 40.61 Top terminals Bottom terminals 9 95 Series - Sockets and accessories for 40 series relays Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip 95.05 (supplied with socket - packaging code SPA) Approvals 8-way jumper link (according to type): Identification tag Modules (see table below) Timer modules (see table below) Sheet of marker tags for retaining and release clip 095.01 Listed: certain relay/ plastic, 72 tags, 6x12 mm socket combinations Technical data Rated values Insulation Protection category Ambient temperature C Screw torque Nm Wire strip length mm 095.01 Max. wire size for 95.03 and 95.05 sockets mm2 AWG 95.03 (blue) 40.31 95.03.0 (black) 95.05 (blue) 95.05.0 (black) 40.51, 40.52, 40.61 095.01 095.01.0 095.18 095.18.0 095.18 095.00.4 99.02 86.10, 86.20 060.72 095.71 095.01 095.01.0 095.18.0 10 A - 250 V * 6 kV (1.2/50 s) between coil and contacts IP 20 -40...+70 0.5 8 solid wire stranded wire 1x6 / 2x2.5 1x4 / 2x2.5 1x10 / 2x14 1x12 / 2x14 * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 75.3 60.9 060.72 22.4 COM 21 11 COM NO 24 14 NO 22 12 NC NC 17.5 17.5 A2 A1 28.3 28.3 O 3.2 A2 COIL 15.8 95.03 A1 35.4 78.6 O 3.2 = 14 12 78.6 = 11 COIL 15.8 95.05 32 36 8-way jumper link for 95.03 and 95.05 sockets 095.18 Rated values 10 A - 250 V 110.5 3.3 095.18 15 15.8 15.8 15.8 15.8 15.8 15 10.3 7 5.1 86 series timer modules Mono-function: (12...24)V AC/DC; function AI; (1.5s...60min) Mono-function: (12...24)V AC/DC; function DI; (1.5s...60min) 86.10 99.02 Approvals (according to type): * Modules in Black housing are available on request. 10 Blue 86.10.0.024.0000 86.20.0.024.0000 Approvals (according to type): 99.02 coil indication and EMC suppression modules for 95.03 and 95.05 sockets Blue* Diode (+A1, standard polarity) (6...220)V DC 99.02.3.000.00 LED (6...24)V DC/AC 99.02.0.024.59 LED (28...60)V DC/AC 99.02.0.060.59 LED (110...240)V DC/AC 99.02.0.230.59 LED + Diode (+A1, standard polarity) (6...24)V DC 99.02.9.024.99 LED + Diode (+A1, standard polarity) (28...60)V DC 99.02.9.060.99 LED + Diode (+A1, standard polarity) (110...220)V DC 99.02.9.220.99 LED + Varistor (6...24)V DC/AC 99.02.0.024.98 LED + Varistor (28...60)V DC/AC 99.02.0.060.98 LED + Varistor (110...240)V DC/AC 99.02.0.230.98 RC circuit (6...24)V DC/AC 99.02.0.024.09 RC circuit (28...60)V DC/AC 99.02.0.060.09 RC circuit (110...240)V DC/AC 99.02.0.230.09 Residual current by-pass (62 k/1W) (110...240)V AC 99.02.8.230.07 95 Series - Sockets and accessories for 40 series relays 95.85.3 Approvals (according to type): 095.91.3 060.72 Screw terminal (Box clamp) socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) 8-way jumper link Identification tag Modules (see table below) Sheet of marker tags for retaining and release clip 095.91.3 plastic, 72 tags, 6x12 mm Technical data Rated values Insulation Protection category Ambient temperature C Screw torque Nm Wire strip length mm Max. wire size for 95.83.3 and 95.85.3 sockets m2 AWG 95.83.3 (blue) 40.31 95.83.30 (black) 95.85.3 (blue) 95.85.30 (black) 40.51, 40.52, 40.61 095.91.3 095.71 095.91.30 095.91.3 095.08 095.91.30 095.08.0 095.08 095.80.3 99.80 060.72 095.08.0 10 A - 250 V * 6 kV (1.2/50 s) between coil and contacts (95.83.3 only) IP 20 -40...+70 0.5 7 solid wire stranded wire 1x6 / 2x2.5 1x4 / 2x2.5 1x10 / 2x14 1x12 / 2x14 * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 75 46.8 21 11 COM 14 NO 24 14 NO 21.6 12 NC O 3.2 95.83.3 A1 COIL 22 12 NC 35.5 78.8 21.6 A1 COIL A2 41 41 81.9 78.8 81.9 O 3.2 A2 28.8 15.5 15.5 COM 11 29.9 95.85.3 33.9 8-way jumper link for 95.83.3 and 95.85.3 sockets 095.08 Rated values 10 A - 250 V 113.1 095.08 7 10 3 13.9 0.75 15.8 15.8 15.8 15.8 15.8 15.8 15.8 99.80 coil indication and EMC suppression modules for 95.83.3 and 95.85.3 sockets Blue* Diode (+A1, standard polarity) 99.80 Approvals (according to type): * Modules in Black housing are available on request. Green LED is standard. Red LED available on request. (6...220)V DC 99.80.3.000.00 LED (6...24)V DC/AC 99.80.0.024.59 LED (28...60)V DC/AC 99.80.0.060.59 LED (110...240)V DC/AC 99.80.0.230.59 LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99 LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99 LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99 LED + Varistor (6...24)V DC/AC 99.80.0.024.98 LED + Varistor (28...60)V DC/AC 99.80.0.060.98 LED + Varistor (110...240)V DC/AC 99.80.0.230.98 RC circuit (6...24)V DC/AC 99.80.0.024.09 RC circuit (28...60)V DC/AC 99.80.0.060.09 RC circuit (110...240)V DC/AC 99.80.0.230.09 (110...240)V AC 99.80.8.230.07 Residual current by-pass (62 k/1W) 11 95 Series - Sockets and accessories for 40 series relays 95.95.3 Approvals (according to type): 095.91.3 Screw (Box clamp) terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip 8-way jumper link Identification tag Modules (see table below) Sheet of marker tags for retaining and release clip 095.91.3 plastic, 72 tags, 6x12 mm Technical data Rated values Insulation Protection category Ambient temperature C Screw torque Nm Wire strip length mm Max. wire size for 95.93.3 and 95.95.3 sockets m2 AWG 95.93.3 (blue) 40.31 095.91.3 095.08 95.93.30 (black) 95.95.3 (blue) 95.95.30 (black) 40.51, 40.52, 40.61 095.71 095.91.30 095.91.3 095.08.0 095.08 095.80.3 99.80 060.72 095.91.30 095.08.0 10 A - 250 V 6 kV (1.2/50 s) between coil and contacts IP 20 -40...+70 0.5 8 solid wire stranded wire 1x6 / 2x2.5 1x4 / 2x2.5 1x10 / 2x14 1x12 / 2x14 * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 75 64.8 060.72 46.8 15.5 15.5 11 COM NO NO 22 12 NC COIL 81.9 A2 A1 O 3.2 32.6 A1 COM 14 O 3.2 32.6 81.9 A2 11 24 NC 78.6 14 12 21 78.6 28.8 COIL 29.8 95.93.3 95.95.3 33.8 8-way jumper link for 95.93.3 and 95.95.3 sockets 095.08 Rated values 10 A - 250 V 113.1 095.08 7 10 3 13.9 0.75 15.8 15.8 15.8 15.8 15.8 15.8 15.8 99.80 coil indication and EMC suppression modules for 95.93.3 and 95.95.3 sockets Blue* Diode (+A1, standard polarity) 99.80 Approvals (according to type): * Modules in Black housing are available on request. Green LED is standard. Red LED available on request. (6...220)V DC 99.80.3.000.00 LED (6...24)V DC/AC 99.80.0.024.59 LED (28...60)V DC/AC 99.80.0.060.59 LED (110...240)V DC/AC 99.80.0.230.59 LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99 LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99 LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99 LED + Varistor (6...24)V DC/AC 99.80.0.024.98 LED + Varistor (28...60)V DC/AC 99.80.0.060.98 LED + Varistor (110...240)V DC/AC 99.80.0.230.98 RC circuit (6...24)V DC/AC 99.80.0.024.09 RC circuit (28...60)V DC/AC 99.80.0.060.09 RC circuit (110...240)V DC/AC 99.80.0.230.09 (110...240)V AC 99.80.8.230.07 Residual current by-pass (62 k/1W) 12 95 Series - Sockets and accessories for 40 series relays 95.55 Approvals (according to type): 095.91.3 Screwless terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) Modules (see table below) Timer modules (see table below) Sheet of marker tags for retaining and release clip 095.91.3 plastic, 72 tags, 6x12 mm Technical data Rated values Insulation Protection category Ambient temperature C Wire strip length mm Max. wire size for 95.55 socket mm2 AWG 95.55 (blue) 40.51, 40.52, 40.61 095.71 095.91.3 99.02 86.10, 86.20 060.72 10 A - 250 V * 6 kV (1.2/50 s) between coil and contacts IP 20 -25...+70 8 solid wire stranded wire 2x(0.2...1.5) 2x(0.2...1.5) 2x(24...18) 2x(24...18) * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 24.6 73.7 44 12 NC A2 A1 COIL O 3.2 34.7 NO 22 30.3 COM 14 37 11 24 95.6 21 30.6 060.72 15.8 22.6 32.5 86 series timer modules Mono-function: (12...24)V AC/DC; function AI; (1.5s...60min) Mono-function: (12...24)V AC/DC; function DI; (1.5s...60min) 86.10 Blue 86.10.0.024.0000 86.20.0.024.0000 Approvals (according to type): 99.02 coil indication and EMC suppression modules for 95.55 socket 99.02 Approvals (according to type): * Modules in Black housing are available on request. Diode (+A1, standard polarity) LED LED LED LED + Diode (+A1, standard polarity) LED + Diode (+A1, standard polarity) LED + Diode (+A1, standard polarity) LED + Varistor LED + Varistor LED + Varistor RC circuit RC circuit RC circuit Residual current by-pass (62 k/1W) (6...220)V DC (6...24)V DC/AC (28...60)V DC/AC (110...240)V DC/AC (6...24)V DC (28...60)V DC (110...220)V DC (6...24)V DC/AC (28...60)V DC/AC (110...240)V DC/AC (6...24)V DC/AC (28...60)V DC/AC (110...240)V DC/AC (110...240)V AC Blue* 99.02.3.000.00 99.02.0.024.59 99.02.0.060.59 99.02.0.230.59 99.02.9.024.99 99.02.9.060.99 99.02.9.220.99 99.02.0.024.98 99.02.0.060.98 99.02.0.230.98 99.02.0.024.09 99.02.0.060.09 99.02.0.230.09 99.02.8.230.07 13 95 Series - Sockets and accessories for 40 series relays 95.55.3 Approvals (according to type): 095.91.3 Screwless terminal socket panel or 35 mm rail mount For relay type Accessories Metal retaining clip Plastic retaining and release clip (supplied with socket - packaging code SPA) Modules (see table below) Sheet of marker tags for retaining and release clip 095.91.3 plastic, 72 tags, 6x12 mm Technical data Rated values Insulation Protection category Ambient temperature C Wire strip length mm Max. wire size for 95.55.3 socket mm2 AWG 95.55.3 (blue) 40.51, 40.52, 40.61 095.71 095.91.3 99.80 060.72 10 A - 250 V * 6 kV (1.2/50 s) between coil and contacts IP 20 -25...+70 8 solid wire stranded wire 2x(0.2...1.5) 2x(0.2...1.5) 2x(24...18) 2x(24...18) * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). COM 14 NO 22 12 NC O 3.2 A1 37.2 A2 COIL 34.7 11 24 30.3 21 95.6 060.72 73.7 44 30.6 24.6 15.8 22.6 32.5 99.80 coil indication and EMC suppression modules for 95.55.3 socket Blue* Diode (+A1, standard polarity) 99.80 Approvals (according to type): * Modules in Black housing are available on request. Green LED is standard. Red LED available on request. (6...220)V DC 99.80.3.000.00 LED (6...24)V DC/AC 99.80.0.024.59 LED (28...60)V DC/AC 99.80.0.060.59 LED (110...240)V DC/AC 99.80.0.230.59 LED + Diode (+A1, standard polarity) (6...24)V DC 99.80.9.024.99 LED + Diode (+A1, standard polarity) (28...60)V DC 99.80.9.060.99 LED + Diode (+A1, standard polarity) (110...220)V DC 99.80.9.220.99 LED + Varistor (6...24)V DC/AC 99.80.0.024.98 LED + Varistor (28...60)V DC/AC 99.80.0.060.98 LED + Varistor (110...240)V DC/AC 99.80.0.230.98 RC circuit (6...24)V DC/AC 99.80.0.024.09 RC circuit (28...60)V DC/AC 99.80.0.060.09 RC circuit (110...240)V DC/AC 99.80.0.230.09 (110...240)V AC 99.80.8.230.07 Residual current by-pass (62 k/1W) 14 95 Series - Sockets and accessories for 40 series relays 95.13.2 PCB socket For relay type Accessories Metal retaining clip (supplied with socket - packaging code SMA) Plastic retaining clip Technical data Rated values Insulation Protection category Ambient temperature C 95.13.2 (blue) 95.13.20 (black) 95.15.2 (blue) 95.15.20 (black) 40.31, 40.41 40.51, 40.52, 40.61 095.51 095.52 10 A - 250 V * 6 kV (1.2/50 s) between coil and contacts IP 20 -40...+70 * For currents >10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12). 95.15.2 12 3.7 13 12 14 14 9.5 A1 12 A2 O 3.2 A2 1 30.3 A2 7.45 A1 11 (21) 7.45 6 5. 11 9.2 O 6 5. O 3.2 11 A2 4 13 12 14 14 A1 40.51 A1 12 11 14 A2 22 21 24 13 7.5 12 14 22 24 21 A2 1.5 A1 40.52 95.13.2 Copper side view A1 12 11 14 A2 22 21 24 30 20 3.5 11 1.5 30 20 5 5 13 7.5 3.5 40.31 11 30.3 A1 O Approvals (according to type): 95.15.2 (22) 12 14 (24) Copper side view 11 (21) A1 A2 40.61 Packaging codes How to code and identify retaining clip and packaging options for sockets. Code options according to the last three letters: 9 5 . 0 5 S P A A Standard packaging SM Metal retaining clip SP Plastic retaining clip 9 5 . 0 5 Without retaining clip 15 (R) www.findernet.com FINDER SpA Via Drubiaglio, 14 10040 ALMESE (TO) - ITALY Tel. +39/011.9346211 Fax +39/011.9359079 Export@findernet.com ISO 9001 ISO 14001 FINDER RELAYS, INC. 4465 Commerce Drive, Suite: 103 Buford, GA 30518 - U.S.A. Tel. +1/770/271-4431 Fax +1/770/271-7530 Finder.us@findernet.com FINDER FRANCE Sarl Avenue d'Italie - BP 40 Zone Ind. du Pre de la Garde F - 73302 ST. JEAN DE MAURIENNE Cedex Tel. +33/479/83 27 27 Fax +33/479/59 80 04 Finder.fr@finder.fr FINDER GmbH Eisenstrasse 30 D - 65428 RUSSELSHEIM Tel. +49/6142/8770 Fax +49/6142/87777 finder.de@finder.de S.P.R.L. FINDER BELGIUM B.V.B.A. Bloemendael, 5 B - 1547 BEVER Tel. +32/54/30 08 68 Fax +32/54/30 08 67 Finder.be@findernet.com FINDER RELAIS NEDERLAND B.V. Dukdalfweg 51 NL - 1041 BC AMSTERDAM Tel. +31/20/615 65 57 Fax +31/20/617 89 92 Finder.nl@findernet.com FINDER PLC Opal Way - Stone Business Park STONE, STAFFORDSHIRE, ST15 0SS - UK Tel. +44/1785/818100 Fax +44/1785/815500 Finder.uk@findernet.com FINDER RELAIS VERTRIEBS GmbH Aspangbahnstrae 2 A - 2361 LAXENBURG Tel. +43/2236/86 41 36 - 0 Fax +43/2236/86 41 36 36 Finder.at@findernet.com RELEVADORES FINDER, S.A. de C.V. Boulevard Hermanos Serdan No. 337 Local C, Col. Aquiles Serdan C.P. 72140 Puebla, Pue. - MEXICO Tel. +52/222/2973197 Fax +52/222/2973198 Finder.mx@findernet.com FINDER AB Stationsvagen, 1 SE - 435 25 MOLNLYCKE Tel. +46/31/88 00 99 Fax +46/31/88 06 04 Finder.se@findernet.com FINDER CZ, s.r.o. Hostiva ska 6/92 CZ - 102 00 PRAHA 10 Tel. +420/2 8688 9504 Fax +420/2 8688 9505 Finder.cz@findernet.com FINDER ECHIPAMENTE srl Str. Lunii, 6 400367 CLUJ-NAPOCA jud. CLUJ - ROMANIA Tel. +40 264 403 888 Fax +40 264 403 889 Finder.ro@findernet.com FINDER ELECTRICA S.L. Pol. Ind. La Pobla LEliana, s/n. Parcela N 4 E - 46185 La Pobla de Vallbona (VALENCIA) Direccion Postal Aptdo 234 Tel. +34-96 272 52 95 Fax +34-96 275 02 50 Finder.es@findernet.com FINDER - Hungary Kereskedelmi Kft. 1046 BUDAPEST Kiss Erno u. 1-3 Tel. +06/1-399-15-25 Fax +06/1-399-15-27 Finder.hu@findernet.com FINDER PORTUGAL, LDA R. Antero de Quental Edificio Hermes N 221 R/C Sala 17 P - 4455 - 586 - PERAFITA Tel. +351/22 99 42 900 - 1 Fax +351/22 99 42 902 Finder.pt@findernet.com FINDER (SCHWEIZ) AG Industriestrasse, 1a, Postfach 23 CH - 8157 DIELSDORF (ZH) Tel. +41/44/885 30 10 Fax +41/44/885 30 20 Finder.ch@finder-relais.ch O FINDER COMPONENTES LTDA. Rua Olavo Bilac, 326 Bairro Santo Antonio Sao Caetano do Sul - SAO PAULO CEP 09530-260 - BRASIL Tel. +55/11/2147 1550 Fax +55/11/2147 1590 Finder.br@findernet.com ZDP020040GB - III/05 - 10 - SAN - Printed in Italy ORD EM E PRO G RE SS FINDER reserves the right to alter characteristics at any time without notice. FINDER assumes no liability for damage to people or property, caused as a result of the wrong use or application of its products.