A22L-02A-T1 - Omron Automation and Safety

CSM_A22_DS_E_8_3

Pushbutton Switch (Cylindrical 22/25-dia.)

A22

Install in 22-dia. or 25-dia. Panel Cutout

(When Using a Ring)

• Lever for easily mounting and removing the Switch Unit.

• Increase wiring efficiency with three-row mounting of Switch Blocks.

• Finger protection mechanism on Switch Unit provided as a standard

feature.

• Use 25-dia. ring to insta ll in 25-dia. panel cutouts.

• Mounted using either open-type (fork-type) or closed-type

(round-type) cr imp terminals.

• IP65 oil resistance (non-lighted models)

IP65 (lighted models)

Refer to Safety Precautions for All Pushbutton Swit ches/

Indicators and Safety Precautions on page 23.

List of Models

Non-lighted Pushbutto n Switches Lighted Pushbutton Switches

Appearance Model

number Appearance Model

number

Round

Flat A22-F

Square

Projected A22-C

Round

Projected A22L-T

Projected A22-T Guard A22-D Full guard

A22L-G

Full guard A22-G

Mushroom

Small (30 dia.)

A22-S Half guard

A22L-H

Half guard A22-H Mushroom

Medium

(40 dia.)

A22-M

Square

Projected

A22L-C

Guard

A22L-D

A22

Model Number Structure

Model Number Legend.....Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch.

For information on combinations, refer to Ordering Information on pages 3 to 6.

(1) (2) (3) (4) (5) (6)

A22 L - T R - 12A - 10 M

(2) Flange Shape

Non-lighted

Lighted

Code

Description

Round

Flat

TProjected

Full-guard

H Half-guard

CSquare Projected

Full-guard

Round

Mushroom

Small (30 dia.)

MMushroom

Medium

(40 dia.)

Code

Description

TRound Projection

Full-guard

H Half-guard

CSquare Projection

Full-guard

(1) Type

Code

Descrip-

tion

symbol

Non-lighted

L Lighted

(3) Illumination

Color

* For non-lighted type

only

Code

Descrip-

tion

RRed

GGreen

YYellow

WWhite

ABlue

BBlack*

(4) Light Source

Without Voltage Reduction Unit

With Voltage Reduction Unit

Note: LE D incor porates the 24-VAC/

VDC type.

Code

Operating Voltage

symbol

Non-lighted

6A LED

6 VAC/VDC

12A

12 VAC/VDC

24A

24 VAC/VDC

5Incan-

descent

lamp

5 VAC/VDC

12 VAC/VDC

24 VAC/VDC

Code

Operating Voltage

T1 LED 100 VAC

T2 200 VAC

(5) Contacts

Note: 1. The contact ratings

are for standard

loads. For

microloads, select

from the accessories

on page 10.

2. Refer to page 13

for contac t ra ti n g s.

Code

Description

10 SPST-NO

01 SPST-NC

11 SPST-NO +

SPST-NC

20 DPST-NO

02 DPST-NC

(6) Switch Action

Note: 1. Momentary

operation:

Self-resetting

2. Alternate operat ion:

Self-holding

The Socket Unit

holds and the

Operation Unit

resets.

Code

Description

Momentary

Alternate

■ Specifications: See pages 13 to 14. ■ Precautions for correct use: Refer to page 23.

■ Dimensions: Refer to page16. ■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Completely Assembled........ Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch.

Non-lighted (Round Type)

Note: The contact ratings are for standard loads.

Non-lighted (Square Type)

Note: The contact ratings are for standard loads.

Operation Momentary opera-

tion (self-resetting) Alternate operation

(self-holding)

Illumination color

Appearance Output Set Set

Round/Flat type

A22-F SPST-NO A22-F@-10M A22-F@-10A

R (red)

Y (yellow)

G (green)

W (white)

A (blue)

B (black)

SPST-NC A22-F@-01M A22-F@-01A

SPST-NO + SPST-NC A22-F@-11M A22-F@-11A

DPST-NO A22-F@-20M A22-F@-20A

DPST-NC A22-F@-02M A22-F@-02A

Round/Projection type

A22-T SPST-NO A22-T@-10M A22-T@-10A

SPST-NC A22-T@-01M A22-T@-01A

SPST-NO + SPST-NC A22-T@-11M A22-T@-11A

SPST-NO + SPST-NO A22-T@-20M A22-T@-20A

SPST-NC + SPST-NC A22-T@-02M A22-T@-02A

Round/Full-guard type

A22-G SPST-NO A22-G@-10M A22-G@-10A

SPST-NC A22-G@-01M A22-G@-01A

SPST-NO + SPST-NC A22-G@-11M A22-G@-11A

SPST-NO + SPST-NO A22-G@-20M A22-G@-20A

SPST-NC + SPST-NC A22-G@-02M A22-G@-02A

Round/Half-guard type

A22-H SPST-NO A22-H@-10M A22-H@-10A

SPST-NC A22-H@-01M A22-H@-01A

SPST-NO + SPST-NC A22-H@-11M A22-H@-11A

SPST-NO + SPST-NO A22-H@-20M A22-H@-20A

SPST-NC + SPST-NC A22-H@-02M A22-H@-02A

Round/Small-size

Mushroom type

(30-dia. head)

A22-S

SPST-NO A22-S@-10M

---

SPST-NC A22-S@-01M

SPST-NO + SPST-NC A22-S@-11M

SPST-NO + SPST-NO A22-S@-20M

SPST-NC + SPST-NC A22-S@-02M

Round/Medium-size

Mushroom type

(40-dia head)

A22-M

SPST-NO A22-M@-10M

SPST-NC A22-M@-01M

SPST-NO + SPST-NC A22-M@-11M

SPST-NO + SPST-NO A22-M@-20M

SPST-NC + SPST-NC A22-M@-02M

Operation Momentary opera-

tion (self-resetting) Alternate operation

(self-holding)

Illumination color

Appearance Output Set Set

Square/Projection type

A22-C SPST-NO A22-C@-10M A22-C@-10A

R (red)

Y (yellow)

G (green)

W (white)

A (blue)

B (black)

SPST-NC A22-C@-01M A22-C@-01A

SPST-NO + SPST-NC A22-C@-11M A22-C@-11A

SPST-NO + SPST-NO A22-C@-20M A22-C@-20A

SPST-NC + SPST-NC A22-C@-02M A22-C@-02A

Square/Guard type

A22-D SPST-NO A22-D@-10M A22-D@-10A

SPST-NC A22-D@-01M A22-D@-01A

SPST-NO + SPST-NC A22-D@-11M A22-D@-11A

SPST-NO + SPST-NO A22-D@-20M A22-D@-20A

SPST-NC + SPST-NC A22-D@-02M A22-D@-02A

Individual models: Refer to pages 7 to 9.

(The Pushbutton, Lamp, and Switch can be ordered

■

Specifications: See pages 13 to 14.

■

Dimensions: Refer to page 16.

■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Completely Assembled........Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch.

Lighted (Round Type)

Note: The contact ratings are for standard loads.

Operation Momentary operation

(self-resetting) Alternate operation

(self-holding) Illumination

color

Appearance

Output Lighting

Operating voltage Set Set

Round/Projection type

LED lighting

(without Voltage Reduction Unit)

A22L-T

SPST-NO

LED

6 VAC/VDC A22L-T@-6A-10M A22L-T@-6A-10A

R (red)

Y (yellow)

G (green)

W (white)

A (blue)

12 VAC/VDC A22L-T@-12A-10M A22L-T@-12A-10A

24 VAC/VDC A22L-T@-24A-10M A22L-T@-24A-10A

SPST-NC 6 VAC/VDC A22L-T@-6A-01M A22L-T@-6A-01A

12 VAC/VDC A22L-T@-12A-01M A22L-T@-12A-01A

24 VAC/VDC A22L-T@-24A-01M A22L-T@-24A-01A

SPST-NO +

SPST-NC

6 VAC/VDC A22L-T@-6A-11M A22L-T@-6A-11A

12 VAC/VDC A22L-T@-12A-11M A22L-T@-12A-11A

24 VAC/VDC A22L-T@-24A-11M A22L-T@-24A-11A

SPST-NO +

SPST-NO

6 VAC/VDC A22L-T@-6A-20M A22L-T@-6A-20A

12 VAC/VDC A22L-T@-12A-20M A22L-T@-12A-20A

24 VAC/VDC A22L-T@-24A-20M A22L-T@-24A-20A

SPST-NC +

SPST-NC

6 VAC/VDC A22L-T@-6A-02M A22L-T@-6A-02A

12 VAC/VDC A22L-T@-12A-02M A22L-T@-12A-02A

24 VAC/VDC A22L-T@-24A-02M A22L-T@-24A-02A

Round/Projection type

LED voltage-reduction lighting

(with Voltage Reduction Unit)

A22L-T

SPST-NO 100 VAC A22L-T@-T1-10M A22L-T@-T1-10A

200 VAC A22L-T@-T2-10M A22L-T@-T2-10A

SPST-NC 100 VAC A22L-T@-T1-01M A22L-T@-T1-01A

200 VAC A22L-T@-T2-01M A22L-T@-T2-01A

SPST-NO +

SPST-NC 100 VAC A22L-T@-T1-11M A22L-T@-T1-11A

200 VAC A22L-T@-T2-11M A22L-T@-T2-11A

SPST-NO +

SPST-NO 100 VAC A22L-T@-T1-20M A22L-T@-T1-20A

200 VAC A22L-T@-T2-20M A22L-T@-T2-20A

SPST-NC +

SPST-NC 100 VAC A22L-T@-T1-02M A22L-T@-T1-02A

200 VAC A22L-T@-T2-02M A22L-T@-T2-02A

Operation Momentary operation

(self-resetting) Alternate operation

(self-holding) Illumination

color

Appearance

Output Lighting

Operating voltage Set Set

Round/Half-guard type

LED lighting

(without Voltage Reduction Unit)

A22L-H

SPST-NO

LED

24 VAC/VDC

A22L-H@-24A-10M A22L-H@-24A-10A

R (red)

Y (yellow)

G (green)

W (white)

A (blue)

SPST-NC A22L-H@-24A-01M A22L-H@-24A-01A

SPST-NO +

SPST-NC A22L-H@-24A-11M A22L-H@-24A-11A

SPST-NO +

SPST-NO A22L-H@-24A-20M A22L-H@-24A-20A

SPST-NC +

SPST-NC A22L-H@-24A-02M A22L-H@-24A-02A

Round/Half-guard type

LED voltage-reduction lighting

(with Voltage Reduction Unit)

A22L-H

SPST-NO 100 VAC A22L-H@-T1-10M A22L-H@-T1-10A

200 VAC A22L-H@-T2-10M A22L-H@-T2-10A

SPST-NC 100 VAC A22L-H@-T1-01M A22L-H@-T1-01A

200 VAC A22L-H@-T2-01M A22L-H@-T2-01A

SPST-NO +

SPST-NC 100 VAC A22L-H@-T1-11M A22L-H@-T1-11A

200 VAC A22L-H@-T2-11M A22L-H@-T2-11A

SPST-NO +

SPST-NO 100 VAC A22L-H@-T1-20M A22L-H@-T1-20A

200 VAC A22L-H@-T2-20M A22L-H@-T2-20A

SPST-NC +

SPST-NC 100 VAC A22L-H@-T1-02M A22L-H@-T1-02A

200 VAC A22L-H@-T2-02M A22L-H@-T2-02A

Individual models: Refer to pages 7 to 9.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications and dimensions: See pages 13 to 16.

■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Completely Assembled........ Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch.

Lighted (Round Typ e)

Note: The contact ratings are for standard loads.

Operation Momentary operation

(self-resetting) Alternate operation

(self-holding) Illumination

color

Appearance

Output Lighting

Operating voltage Set Set

Round/Full-guard type

LED lighting

(without Voltage Reduction Unit)

A22L-G

SPST-NO

LED

6 VAC/VDC A22L-G@-6A-10M A22L-G@-6A-10A

R (red)

Y (yellow)

G (green)

W (white)

A (blue)

12 VAC/VDC A22L-G@-12A-10M A22L-G@-12A-10A

24 VAC/VDC A22L-G@-24A-10M A22L-G@-24A-10A

SPST-NC 6 VAC/VDC A22L-G@-6A-01M A22L-G@-6A-01A

12 VAC/VDC A22L-G@-12A-01M A22L-G@-12A-01A

24 VAC/VDC A22L-G@-24A-01M A22L-G@-24A-01A

SPST-NO +

SPST-NC

6 VAC/VDC A22L-G@-6A-11M A22L-G@-6A-11A

12 VAC/VDC A22L-G@-12A-11M A22L-G@-12A-11A

24 VAC/VDC A22L-G@-24A-11M A22L-G@-24A-11A

SPST-NO +

SPST-NO

6 VAC/VDC A22L-G@-6A-20M A22L-G@-6A-20A

12 VAC/VDC A22L-G@-12A-20M A22L-G@-12A-20A

24 VAC/VDC A22L-G@-24A-20M A22L-G@-24A-20A

SPST-NC +

SPST-NC

6 VAC/VDC A22L-G@-6A-02M A22L-G@-6A-02A

12 VAC/VDC A22L-G@-12A-02M A22L-G@-12A-02A

24 VAC/VDC A22L-G@-24A-02M A22L-G@-24A-02A

Round/Full-guard type

LED voltage-reduction lighting

(with Voltage Reduction Unit)

A22L-G

SPST-NO 100 VAC A22L-G@-T1-10M A22L-G@-T1-10A

200 VAC A22L-G@-T2-10M A22L-G@-T2-10A

SPST-NC 100 VAC A22L-G@-T1-01M A22L-G@-T1-01A

200 VAC A22L-G@-T2-01M A22L-G@-T2-01A

SPST-NO +

SPST-NC 100 VAC A22L-G@-T1-11M A22L-G@-T1-11A

200 VAC A22L-G@-T2-11M A22L-G@-T2-11A

SPST-NO +

SPST-NO 100 VAC A22L-G@-T1-20M A22L-G@-T1-20A

200 VAC A22L-G@-T2-20M A22L-G@-T2-20A

SPST-NC +

SPST-NC 100 VAC A22L-G@-T1-02M A22L-G@-T1-02A

200 VAC A22L-G@-T2-02M A22L-G@-T2-02A

Individual models: Refer to pages 7 to 9.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications and dimensions: Refer to pages 13 to 16.

■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Completely Assembled........Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch.

Lighted (Square Type)

Note: The contact ratings are for standard loads.

Operation Momentary operation

(self-resetting) Alternate operation

(self-holding) Illumination

color

Appearance

Output Lighting

Operating voltage Set Set

Square/Projection type

LED lighting

(without Voltage Reduction Unit)

A22L-C

SPST-NO

LED

24 VAC/VDC

A22L-C@-24A-10M A22L-C@-24A-10A

R (red)

Y (yellow)

G (green)

W (white)

A (blue)

SPST-NC A22L-C@-24A-01M A22L-C@-24A-01A

SPST-NO +

SPST-NC A22L-C@-24A-11M A22L-C@-24A-11A

SPST-NO +

SPST-NO A22L-C@-24A-20M A22L-C@-24A-20A

SPST-NC +

SPST-NC A22L-C@-24A-02M A22L-C@-24A-02A

Square/Projection type

LED voltage-reduction lighting

(with Voltage Reduction Unit)

A22L-C

SPST-NO 100 VAC A22L-C@-T1-10M A22L-C@-T1-10A

200 VAC A22L-C@-T2-10M A22L-C@-T2-10A

SPST-NC 100 VAC A22L-C@-T1-01M A22L-C@-T1-01A

200 VAC A22L-C@-T2-01M A22L-C@-T2-01A

SPST-NO +

SPST-NC 100 VAC A22L-C@-T1-11M A22L-C@-T1-11A

200 VAC A22L-C@-T2-11M A22L-C@-T2-11A

SPST-NO +

SPST-NO 100 VAC A22L-C@-T1-20M A22L-C@-T1-20A

200 VAC A22L-C@-T2-20M A22L-C@-T2-20A

SPST-NC +

SPST-NC 100 VAC A22L-C@-T1-02M A22L-C@-T1-02A

200 VAC A22L-C@-T2-02M A22L-C@-T2-02A

Operation Momentary operation

(self-resetting) Alternate operation

(self-holding) Illumination

color

Appearance

Output Lighting

Operating voltage Set Set

Square/Full-guard type

LED lighting

(without Voltage Reduction Unit)

A22L-D

SPST-NO

LED

24 VAC/VDC

A22L-D@-24A-10M A22L-D@-24A-10A

R (red)

Y (yellow)

G (green)

W (white)

A (blue)

SPST-NC A22L-D@-24A-01M A22L-D@-24A-01A

SPST-NO +

SPST-NC A22L-D@-24A-11M A22L-D@-24A-11A

SPST-NO +

SPST-NO A22L-D@-24A-20M A22L-D@-24A-20A

SPST-NC +

SPST-NC A22L-D@-24A-02M A22L-D@-24A-02A

Square/Full-guard type

LED voltage-reduction lighting

(with Voltage Reduction Unit)

A22L-D

SPST-NO 100 VAC A22L-D@-T1-10M A22L-D@-T1-10A

200 VAC A22L-D@-T2-10M A22L-D@-T2-10A

SPST-NC 100 VAC A22L-D@-T1-01M A22L-D@-T1-01A

200 VAC A22L-D@-T2-01M A22L-D@-T2-01A

SPST-NO +

SPST-NC 100 VAC A22L-D@-T1-11M A22L-D@-T1-11A

200 VAC A22L-D@-T2-11M A22L-D@-T2-11A

SPST-NO +

SPST-NO 100 VAC A22L-D@-T1-20M A22L-D@-T1-20A

200 VAC A22L-D@-T2-20M A22L-D@-T2-20A

SPST-NC +

SPST-NC 100 VAC A22L-D@-T1-02M A22L-D@-T1-02A

200 VAC A22L-D@-T2-02M A22L-D@-T2-02A

Individual models: Refer to pages 7 to 9.

(The Pushbutton, Lamp, and Switch can be ordered separately.)

■ Specifications and dimensions: See pages 13 to 16.

■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Subassembled.......................The Pushbutton, Lamp, or Switch can be ordered separately. Use them in combination for models that are not

available as assembled Units. These can also be used as inventory for maintenance parts.

Lighted Models Lighted Models

Non-lighted Models (without Voltage Reduction Unit) (with Voltage Reduction Unit)

Pushbutton Pushbutton Pushbutton

Lamp Lamp

Switch

Switch (without Voltage Reduction Unit)

Switch (with Voltage Reduction Unit)

Incandescent

lamp LED LED

Ordering set combinations: Refer to pages 3 to 6. ■ Specifications and dimensions: See pages 13 to 16.

■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Subassembled.......................The Pushbutton, Lamp, or Switch can be ordered separately. Use them in combination for models that are not

available as assembled Units. These can also be used as inventory for maintenance parts.

Pushbutton

Non-lighted

Lighted

Note: Common to incandescent lamps and LED lamps.

Sealing IP65 oil-resistant models

Appearance

Flat type Projection type Full-guard type Half-guard type

Color Model Model Model Model

Red A22-FR A22-TR A22-GR A22-HR

Green A22-FG A22-TG A22-GG A22-HG

Yellow A22-FY A22-TY A22-GY A22-HY

White A22-FW A22-TW A22-GW A22-HW

Blue A22-FA A22-TA A22-GA A22-HA

Black A22-FB A22-TB A22-GB A22-HB

Sealing IP65 oil-resistant models

Appearance

Round/Mushroom type

(30-dia. head)

Round/Mushroom type

(40-dia. head)

Square/Projection type Square/Full-guard type

Color Model Model Model Model

Red A22-SR A22-MR A22-CR A22-DR

Green A22-SG A22-MG A22-CG A22-DG

Yellow A22-SY A22-MY A22-CY A22-DY

White A22-SW A22-MW A22-CW A22-DW

Blue A22-SA A22-MA A22-CA A22-DA

Black A22-SB A22-MB A22-CB A22-DB

Sealing IP65

Appearance

Projection type Full-guard type Half-guard type

Color Model Model Model

Red A22L-TR A22L-GR A22L-HR

Green A22L-TG A22L-GG A22L-HG

Yellow A22L-TY A22L-GY A22L-HY

White A22L-TW A22L-GW A22L-HW

Blue A22L-TA A22L-GA A22L-HA

Sealing IP65

Appearance

Square/Projection type Square/Full-guard type

Color

Model Model

Red A22L-CR A22L-DR

Green A22L-CG A22L-DG

Yellow A22L-CY A22L-DY

White A22L-CW A22L-DW

Blue A22L-CA A22L-DA

Ordering set combinations: Refer to pages 3 to 6. ■ Specifications and dimensions: See pages 13 to 16.

■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Subassembled.......................The Pushbutton, Lamp, or Switch can be ordered separately. Use them in combination for models that are not

available as assembled Units. These can also be used as inventory for maintenance parts.

Lamp

LED Lamp

*1. For voltage-reduction lighting, use the A22-24A@. Only 24-V LED lamps can be used.

*2. Used when the Push button color is yellow or white.

Incandescent Lamp

Switch (Standard Load)

No Voltage Reduction Unit

Voltage Reductio n Unit

*1. A DPST-NO model is shown here as an example.

*2. For a model with a Vol tage Reduction Unit, use the A22-24A@. Only 24-V LED lamps can be used.

Operating voltage 6 VAC/VDC 12 VAC/VDC 24 VAC/VDC

Appearance LED Color Model Model Model

and

Red A22-6AR A22-12AR A22-24AR

Green A22-6AG A22-12AG A22-24AG

Yellow *2A22-6AY A22-12AY A22-24AY

Blue A22-6AA A22-12AA A22-24AA

Appearance

Operating

voltage

5 VAC/VDC 12 VAC/VDC 24 VAC/VDC

A22-5 A22-12 A22-24

Classification

Appearance

Non-lighted Lighted

Operation Momentary Alternate Momentary Alternate

Contacts Model Model Model Model

Standard

load

SPST-NO A22-10M A22-10A A22L-10M A22L-10A

SPST-NC A22-01M A22-01A A22L-01M A22L-01A

SPST-NO + SPST-NC

A22-11M A22-11A A22L-11M A22L-11A

SPST-NO + SPST-NO

A22-20M A22-20A A22L-20M A22L-20A

SPST-NC + SPST-NC

A22-02M A22-02A A22L-02M A22L-02A

Classification

Appearance

110 VAC, Lighted 220 VAC, Lighted

Operation Momentary Alternate Momentary Alternate

Contacts Model Model Model Model

Standard

load

SPST-NO A22L-10M-T1 A22L-10A-T1 A22L-10M-T2 A22L-10A-T2

SPST-NC A22L-01M-T1 A22L-01A-T1 A22L-01M-T2 A22L-01A-T2

SPST-NO + SPST-NC

A22L-11M-T1 A22L-11A-T1 A22L-11M-T2 A22L-11A-T2

SPST-NO + SPST-NO

A22L-20M-T1 A22L-20A-T1 A22L-20M-T2 A22L-20A-T2

SPST-NC + SPST-NC

A22L-02M-T1 A22L-02A-T1 A22L-02M-T2 A22L-02A-T2

Ordering set combinations: Refer to pages 3 to 6. ■ Specifications and dimensions: See pages 13 to 16.

■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Accessories (Order Separately)

Accessories

Item Appearance Classification Model Remarks

Switch Blocks

SPST-NO Standard load A22-10

Order Switch Blocks to add an SPST-NO

(A22-10) or SPST-NC (A22-01) Swit ch

Block (for standard loads) or to replace a

Switch Block.

Microload A22-10S

SPST-NC Standard load A22-01

Microload A22-01S

DPST-NO Standard load A22-20

Microload A22-20S

DPST-NC Standard load A22-02

Microload A22-02S

SPST-NO + SPST-NC

Standard load A22-11

Microload A22-11S

Lamp Sockets Direct lighting A22-TN

Voltage-reduction

lighting 110 VAC A22-T1 Used when changing the lighting method.

(LED only)

220 VAC A22-T2

Mounting Latches For momentary models A22-3200 Provided as standard. Order Mounting

Latches only whe n mounting Switch Blocks

or Lamp Sockets that are purchased individ -

ually.

For alternate models A22-3210

Legend

Plate

Frames

Standard

size

With Snap-in Legend Plate

(Without text)

White A22Z-3321

Snap-in Legend Plate is acr ylic.

Red A22Z-3322

Black A22Z-3323

Without Snap-in Legend Plate A22Z-3320

Large size With Snap-in Legend Plate

(Without text)

White A22Z-3331

Snap-in Legend Plate is acr ylic.

Red A22Z-3332

Black A22Z-3333

Without Snap-in Legend Plate A22Z-3330

Lock Ring Round A22Z-3360 This Lock Ring is used when a more secure

lock feature is required.

Metallic Bezel Rings For flat or projection models A22Z-3580 Replace with the standard model.

Material:

Copper alloy-Nickel chrome plating

Cannot be used with the M22.

For full-guard models A22Z-3582

Sealing Caps

For flat models A22Z-3600F Used to prevent dust o r water from entering

the Operation Unit (Pushbutton, etc.).

Color: opaque

Material: silicon

For projection models A22Z-3600T

For full-guard models A22Z-3600G

Color Caps

Red A22Z-30TR Used for changing the Pushbutton color of

the (round) Pushbutt on Switches. Cannot

be used, however, with Half-guard Switch-

es.

Green A22Z-30TG

Yellow A22Z-30TY

White A22Z-30TW

Blue A22Z-30TA

Caps For A22

For projection, full-guard, or half-gu ard models

A22Z-3490 Material: polycarbonate resin

For M22 For round models A22Z-3495

Three-throw Spacer --- A22Z-3003

Used when mounting three Nonlighted

Switches. Cannot be used with Alte rnate

action type, knob-type Selector, and Key-

type Selector because of the struct ure.

Mushroom-type Switch provide s an A2 2Z-

3003, three-thro w spacer . (See page 28.)

Hole Plug Round A22Z-3530 Can be plugge d into p re-cut panel hol es for

future expansion. The color is black.

Color: Black

Control Boxes

(Enclosures)

One hole A22Z-B101

For those designed A22Z-B1@, DPST-NO

or DPST-NC Switches cannot be used.

A22Z-B2@ Control Boxes, A22-series alter-

nate operation models, and DPST-NO,

DPST-NC, and SPST-NO + SPST-NC con-

tacts cannot be used.

Material: Polycarbonate resin

A22Z-B201

One hole, yellow box (for emergency st op)

A22Z-B101Y

A22Z-B201Y

Two holes A22Z-B102

A22Z-B202

Three holes A22Z-B103

A22Z-B203

Connectors Applicable cable

diameter (mm)

7 to 9 dia. A22Z-3500-1 Plastic connect or used to extend a cable

from the Switch Box. (See 9 to 11 dia. A2 2Z-

3500-2 page 27.)

9 to 11 dia. A22Z-3500-2

A22

Ordering Information

Item Appearance Classification Model Remarks

25-dia. Ring --- A22Z-R25 Use when mounting to a panel with a 25-dia. hole.

For details, refer to page 18. Since this is not at-

tached to the main body, order separately.

30-dia. Resin Attach-

ment Round A22Z-A30 Use when mounting to a panel with a 30-dia. hole.

For details, ref er to page 20.

Lock Plate --- A22Z-3380 Use to fix the lever on the Switch.

Simple Protective

Cover --- A22Z-3700 Prevents foreign matter entering into the Switch

from the back of the panel.

■ Specifications: See pages 13 to 14. ■ Precautions for correct use: See page 23.

■ Dimensions: See page 16. ■ Accessories and tools: See pages 10 to 12.

A22

Ordering Information

Tools

Item Appearance Classification Model Remarks

Snap-in

Legend

Plates

Standard

size

Without text

Black A22Z-3443B

Attached to the Stan-

dard-size Legend Plate

Frame. (See page 28.)

Material: Acrylic

Red A22Z-3443R

White A22Z-3443W

Transparent A22Z-3443C

With text

White text on red

background ❍A22Z-3443R-2

STOP A22Z-3443R-4

White text on

black background

|A22Z-3443B-1

START A22Z-3443B-3

ON A22Z-3443B-5

OFF A22Z-3443B-6

UP A22Z-3443B-7

DOWN A22Z-3443B-8

POWER ON A22Z-3443B-9

OFF-ON A22Z-3443B-10

Large size Without text

Black A22Z-3453B Used as an Emergency

Stop Switch Legend

Plate. (See page 28.)

Material: Acrylic

Red A22Z-3453R

White A22Z-3453W

Transparent A22Z-3453C

For Emer-

gency Stop

Switch

Black text on

yellow back-

ground

60-dia. round plate with black letters

on a yellow background A22Z-3466-1

EMERGENCY STOP is

engraved on the plate. Used

as an Emergency Stop

Switch Legend Plate

90-dia. round plate with black letters

on a yellow background A22Z-3476-1

Character Films

No print (Round) A22Z-3460 After printing on a f ilm, af-

fix to the indicator plate of

the Lighted Pushbutton

Switch. (The back is

coated with adhesive.)

Character

(Round)

|A22Z-3460-1

❍A22Z-3460-2

START A22Z-3460-3

STOP A22Z-3460-4

No print (Square) A22Z-3480

Item Appearance Classification Model Remarks

Lamp Extractor --- A22Z-3901 Rubber tool used to easily replace

Lamps

Tightening Wrench --- A22Z-3905 Used to tighten mounting nuts from the

back of the panel and to repl ace the cap

of the Lighted Emergency Swit ch.

Cap Tightening Tool --- A22Z-3908 Used for replacing the cap of the Half-

guard Pushbutton Switch.

Cap Puller --- A3PJ-5080 Used for removing the cap from the

Pushbutton of t he Square Lig hted Pu sh-

button Switch.

■ Specifications: See pages 13 to 14. ■ Precautions for correct use: See page 23.

■ Dimensions: See page 16. ■ Accessories and tools: See pages 10 to 12.

A22

Specifications

Approved Standard Ratings

UL, cUL (File No. E41515)

6 A at 220 VAC, 10 A at 110 VAC

Note: Only Switch Blocks and Lamp Sockets are recognized by UL.

Refer to Page 10 for the model numbers.

EN60947-5-1 (Low Voltage Directive)

3 A at 220 VAC

CCC (GB14048.5)

3 A at 240 VAC, 1.5 A at 24 VDC

Ratings

Contacts (Standard Load)

Note: 1. The above ratings were obtained by conducting tests under the

following conditions.

(1) Ambient temper ature: 20±2°C

(2) Ambient humidity: 65±5% RH

(3) Operating fr equency: 20 operations/minute

2. Minimum applicable load: 10 mA at 5 VDC

Contacts (Microload)

LED Indicators

Incandescent Lamp

Voltage-reduction Lighting

Contacts

(Standard

Load)

Rated

voltage

Rated current (A)

Induc-

tive load Resis-

tive load Induc-

tive load Resis-

tive load

10A

24 VAC 10 10

--- ---

110 VAC 5 10

220 VAC 3 6

380 VAC 2 3

440 VAC 1 2

24 VDC

--- ---

1.5 10

110 VDC 0.5 2

220 VDC 0.2 0.6

380 VDC 0.1 0.2

Rated applicable load 50 mA at 24 VDC (Resistive load)

Minimum applicable load 1 mA at 5 VDC

Rated voltage Rated current Operating voltage

6 VAC/VDC 8 mA 6 VAC/VDC±5%

12 VAC/VDC 12 VAC/VDC±5%

24 VAC/VDC 24 VAC/VDC±5%

Rated voltage Rated current Operating voltage

6 VAC/VDC 200 mA 5 VAC/VDC

14 VAC/VDC 80 mA 12 VAC/VDC

28 VAC/VDC 40 mA 24 VAC/VDC

Rated

voltage Rated

current Operating voltage Applicable lamp

(BA9S/Base: 13)

110 VAC 8 mA

100 VAC

(95 to 115 V) LED Lamp

(A22-24A@)

220 VAC 200 VAC

(190 to 230 V)

A22

Specifications

Characteristics

*1. Malfunction within 1 ms.

*2. With no icing or co ndensation.

*3. Degree of protection f r om the front of the panel.

Operating Characteristics (for SPST-NO/SPST-NC)

* Rotation torque for Knob-type Selector and Key-type Selector Switches.

Type Pushbutton Switches Knob-type Selector Switches Key-type

Selector Switch Indicator

Item

Non-lighted models:

A22-F A22-T

A22-G A22-H

A22-S A22-M

A22-C A22-D

Lighted models:

A22L-T A22L-G

A22L-H A22L-C

A22L-D

Non-lighted model:

A22S Lighted model:

A22W Non-lighted model:

A22K M22

Allowable

operating

frequency

Mechanical Momentary operation:

60 operations/minute max. Manual reset: 30 operations/minute max.

Automatic reset: 30 operations/minut e max. ---

Electrical 30 operations/minute max. ---

Insulation resistance 100 MΩ min. (at 500 VDC)

Contact

resistance Standard load 100 mΩ max. (initial value)

Microload 100 mΩ max. (initial value)

Dielectric

strength

Between termi-

nals of same

polarity 2,500VAC, 50/60Hz for 1min

Betwee n each

terminal and

ground 2,500VAC, 50/60Hz for 1min

Vibration

resistance Malfunction *1Malfunction *2: 10 to 55 Hz, 1.5-mm double amplitude

Shock

resistance

Destruction 1,000 m/s2 max. 1,000 m/s2 max. 1,000 m/s2 max. 1,000 m/s2 max. 1,000 m/s2 max. 1,000 m/s2 max.

Malfunction *11,000 m/s2 max. 600 m/s2 max. 1,000 m/s2 max. 600 m/s2 max. 1000 m/s2 max. 600 m/s2 max.

Durability Mechanical Momentary operation:

5,000,000 operations min. 500,000

operations min. 100,000

operations min. 500,000

operations min. ---

Electrical 500,000 operations min. 500,000

operations min. 100,000

operations min. 500,000

operations min. ---

Ambient operating

temperature * 2−20°C to 70°C−20°C to 55°C−20°C to 70°C−20°C to 55°C−20°C to 70°C−20°C to 55°C

Ambient operating

humidity 35% to 85% RH

Ambient storage

temperature *2−40°C to 70°C

Degree of protection *3IP65

(oil-resistant) IP65 IP65

(oil-resistant) IP65

Electric shock protecti on

class Class II

PTI

(tracking characteristic) 175

Degree of contamination 3 (IEC947-5-1)

Type Pushbutton Switches Knob-type Selector Key-type Selector Switch

Item

Lighted Nonlighted

Pushbutton

Switches Manual reset Automatic reset Manual reset Automatic reset

A22-F A22-T

A22-G A22-H

A22-C A22-D

A22-S A22-M

A22L-T A22L-G

A22L-H A22L-C

A22L-D

A22S

A22W A22K

Total travel force

(TTF) max. 29.4 N 0.34 N·m*0.2 5 N·m for two notches *

0.34 N·m for three notches *0.34 N·m*0.25 N·m for two notches *

0.34 N·m for three notches *

Total travel (TT) 5.5 mm max. App r ox. 90° for two notches

(Approx. 45° for three notches) Approx. 90° for two notches

(Approx. 45° for three notches)

Resetting force

(RF) min. --- 0.34 N·m max.*--- 0.34 N·m max.*---

A22

Nomenclature

Model Structure

Push b utton

Lo c k Ring

Lamp

• Light Source

LED lamp

Incandescent lamp

Switch

• Contacts

• Lighting Method

Non-lighted:

Red, Green, Yellow, White, Blue, Black

Lighted:

Red, Green Yellow, White, Blue

SPST-NO, SPST-NC, SPST-NO + SPST-NC,

SPST-NO + SPST-NO, SPST-NC + SPST-NC

(Minimum applicable load: 10 mA at 5 VDC)

Non-lighted

Lighted (without Voltage Reduction Unit)

Lighted (with Voltage Reduction Unit)

The above illustration shows a lighted model.

• Available Colors

A22

Dimensions (Unit: mm)

Lighted/Non-lighted Pushbutton Switches (The following illustrations are for momentary operation.)

Note: Lighted models have the same dimensions as shown above, whether they are with or witho ut Voltage Reduction Units.

* Alternate operation models are 9.3 mm longer.

1.8

5.9

0.5

27R

3436

29.7 dia.

54.7 *

0.5 1.8

5.9

29.7 dia.

12 64

1.8

5.9

0.5

29.7 dia.

72.7 *

Flat Type/A22-F For SPST-NO (SPST-NC) Switches For SPST-NO (SPDT-NC)

Alternate Operation Switches

For DPST-NO (DPST-NC)

Monoblock-contact Switches

29.7 dia.

5.9

1.8

0.5

18.5

12 54.7 *

Half-guard Type/A22-H/A22L-H

1.8

5.9

0.5

19 54.7 *

29.7 dia. 23.9 dia.

Projection Type/A22-T/A22L-T

1.8

5.9

0.5

29.7 dia.

54.7 *

Full-guard Ty pe/A22-G/A22L-G

1.8

5.9

0.5

40 dia.

54.7 *

40-dia. Mushroom Type/A22-M

1.8

5.9

0.5

54.7 *

25.6 × 25.6

29.8 × 29.8

Square/Projection type/A22-C/A22L-C

1.8

5.9

0.5

5.3

54.7 *

29.8 × 29.8

Square/Full-guard Type/A22- D/A22L -D

A22

Dimensions (Unit: mm)

Terminal Arrangement (Bottom View)

Terminal Connection

Panel Cutouts

Lock ring is provided as a standard item.

•When applying coating such as paint to the panel, the dimensions should be those after the application of coating.

•Recommended panel thickness: 1 to 5 mm.

•Use an A22Z-R25 Ring when mounting to a panel with 25-mm holes.

Non-lighted

(SPST-NO + SPST-NC) Lighted

(SPST-NO + SPST-NC) Non-lighted

(DPST-NO + DPST-NC)

Item Terminal connection

Non-lighted (SPST-NO

+ SPST-NC)

Non-lighted (DPST-NO

+ DPST-NC)

Lighted without Voltage

Reduction Unit

(SPST-NO + SPST-NC)

Lighted with Voltage

Reduction Unit

(SPST-NO + SPST-NC)

16.7

20.7

Switch Blocks

M3.5 screw

10 Switch Blocks

Lamp socket

20.7

Switch Blocks

BO TTOM VIEW

2X2

(−)

(+)

BO TTOM VIEW

22.3+0.4

025+0.5

dia. dia.

A22

Dimensions (Unit: mm)

Accessories

0.3

0.1

8.3

40.830.3

20.5

2.8

29.8

28 dia.28 dia.

0.3

1.5

0.3

2.2

22.2±dia.

Legend Plate Frames

Standard Models A22Z-332@27

50.8

30.3

20.5

2.8

29.8

28 dia.

0.3

1.5

0.3

2.2

0.3

0.1

22.2±dia.

Large

A22Z-333@

10.6 dia.

9.5 dia.

20 ±1.5

BA9S/13Model indication

Lamp

LED A22-6@, 12@, 24@

28 max.

10±1 dia.

BA9S/13

Incandescent lamp A22-5, 12, 24

22.2 dia.

2.8

20.5

30 dia.

Lock Ring A22Z-3360

0.5

1.3

22 dia.

24.8 dia.

27 dia.

25-dia. Ring A22Z-R25

23.4 dia. 10.2

Color Cap A22Z-30T@

30 dia. 13

2.5

Hole Plug (Round) A22Z-3530

17.6

19.6 dia.

5.2

17.9 dia.

Caps

A22 (for round models) A22Z-3490

17.6

22.5

111.1

24.1 dia.

21.4 dia.

21.1 dia.

23.7 dia.

M22 (for round models) A22Z-3495

A22

Dimensions (Unit: mm)

32 dia.

16.6

22.2 dia.

33 dia.

31.5 dia.

22.2 dia.

32.5 dia.

32 dia.

(26 dia.)

22.2 dia.

33 dia.

R1 R2

14.5

Sealing Caps

For Flat Models A22Z-3600F For projection models A22Z-3600T For full-guard models A22Z-3600G

28.7 dia.

24±0.2

29.7±0.3 dia.

M27 P=1

511.5

dia.

18.5

28.7 dia.

24±0.2

29.7±0.3 dia.

M27 P=1

dia.

Metallic Bezel Rings

For Flat/Projection Models A22Z-3580 For full-guard models

A22Z-3582

26.8 8.2 1

26.8

17.9

Snap-in Legend Plates

For Standard Models A22Z-3443@-@For Large Models A22Z-3453@

Black letters

Yellow 22.2 dia.

90 dia.

60 dia.

22.2 dia.

Yellow

Black letters

For Emergency-stop Models A22Z-3476-1 (90 dia.) A22Z-3466-1 (60 dia.)

17±0.2

t 0.22

17±0.2

1.2±0.2

0.1

0.2

19.4±

Character Film

For Round Models A22Z-3460-@

21.5 × 21.5±0.2

0.3

t 0.22

For Square Models A22Z-3480

A22

Dimensions (Unit: mm)

8.5 dia.

11 dia.

12.5

17.5 55

8 dia

Lamp Extractor A22Z-3901

30 dia.

4.5 20 90 2

19.2 dia.

21.2 dia.

25 dia.

Tightening Wrench A22Z-3905

5 dia.

20.523.4

Cap Tightening Tool A22Z-3908

6.1

3.8

20.5

2.8

22.2 dia.

34.7 dia.

30-dia. Resin Attachment A22Z-A30

2.5 2.5

510

25±2

0.3

Cap Puller A3PJ-5080

34.5

30.1

5.3 7.3 dia.

13.2 4

16.5

9.7

18 8

Lock Plate A22Z-3380

2.8

78.8 16.5

22.5 dia.

5620.5

47.2

0.3 recess

42.2

29.5

57.5

25.1

30 × 30

Simple Protective Cover A22Z-3700

10.8

62.5

13.7 dia.

12.9 dia.

6.1

3.4

14.2 dia.

Three-throw Spacer A22Z-3003

A22

Dimensions (Unit: mm)

Control Box (Enclosure) A22Z-B10@

20.5

2.8

22.1 dia.

(10x36) 0.6-mm

concave surface (Lead cable hole)

Two, 21 dia.

20 41 69.5

Case (black)

Cover (*)

Four, M4 Phillips binding screws

(Lead cable hole) Two

mounting holes

16±1 dia.

A22Z-B101 (One Hole)

A22Z-B101Y Cable Port Hole (Top View)

* A22Z-B101: gray

A22Z-B101Y: yellow

16±1 dia

(10x36) 0.6-mm

concave surface (Lead cable hole)

(Lead cable hole)

Two

mounting

holes

21 dia.

Two, 22.1 dia.

101

20 41 69.5

137

Case (black)

Cover (gray)

Four, M4 Phillips binding screws

A22Z-B102 (Two Holes) Cable Port Hole (Top View)

199

5050

20 41 69.5

163

156

16±1 dia

(10x36) 0.6-mm

concave surface

(Lead cable hole)

Two

mounting

holes

21 dia.

Three, 22.1 dia.

Case (black)

Cover (gray)

Four, M4 Phillips binding screws

A22Z-B103 (Three Holes) Cable Port Hole (Top View)

6.3

4.3

(Panel Mounting Hole)

A22

Dimensions (Unit: mm)

Control Box A22Z-B20@

22.1 dia.

Four, M4 Phillips binding screws

(10×36) 0.6-mm

concave surface

Two, 21 dia.

Case (black)

Cover (*)

Two, 19 dia.

(base)

21 dia.

(both sides)

Two mounting

holes

30.5

20.5

2.8

A22Z-B201 (One Hole)

A22Z-B201Y Cable Port Hole (Top View)

* A22Z-B201: gray

A22Z-B201Y: yellow

Two, 22.1 dia.

our,

Philli

ng screws

(10×36) 0.6-mm

concave surface

Two, 21 dia.

Case (black)

Cover (gray)

Two, 19 dia.

(base)

21 dia.

(both sides)

Two mounting

holes

30.5 60

137

A22Z-B202 (Two Holes) Cable Port Hole (Top View)

Four, M4 Phillips binding screws

(10×36) 0.6-mm

concave surface

Two, 21 dia.

Case (black)

Cover (gray)

Two, 19 dia.

(base)

21 dia.

(both sides)

Two

mounting

holes

Three, 22.1 dia.

30.5 60

199

158

138

A22Z-B203 (Three Holes) Cable Port Hole (Top View)

6.3

4.3

(Panel Mounting Hole)

A22

Safety Precautions

Refer to Safety Precautions for All Pushbutton Switches/Indic ators.

Do not apply a voltage between the incandescent

lamp and the terminal that is greater than the rated

voltage. If the incandescent lamp is broken, the

Operation Units may pop out.

Always turn OFF the power and wait for 10 minutes

before replacing the incandescent lamp. If the lamp is replaced

immediately after the power is turned OFF, the remaining heat

may cause burns.

Mounting

•Do not perform wiring with power supplied to the Switch. Do not

touch the terminals or other charged parts of the Switch while

power is being supplied. Doing so may result in electric shock.

•Always make sure that the power is turned OFF before mounting,

removing, or wiring the Switch, or performing maintenance.

Do not tighten the mounting ring more than necessary using tools

such as pointed-nose pliers. Doing so will damage the mounting

ring.

The tightening torque is 0.98 to 1.96 N·m.

•Recommended panel thickness: 1 to 5 mm.

•When mounting the caps after changing the LED or the caps,

tighten the caps at a tightening torque of 0.49 tp 0.78 N·m.

Wiring

•Terminal screws must be Phillips or slotted M3.5 screws with a

square washer.

•The tightening torque is 1.08 to 1.27 N·m.

•Solid wires, stranded wires, and crimp terminals can be connected

to the Switch.

Applicable Wire Size

Stranded wire: 2 mm2 max.

Solid wire: 1.6 dia. max.

Bare Crimp Terminals

Crimp Terminals with Insulating Sheath

•After wiring the Switch, maintain an appropriate clearance and

creepage distance.

Operating Environment

•The IP65 model is designed with a degree of protection so that it

will not sustain damage if it is subjected to water from any direction

to the front of the panel.

•This switch is intended for indoor use only.

Using the Switch outdoors will result in failure.

LED

•The LED current-limiting resistor is built-in, so internal resistance is

not required.

•If commercially available LEDs are used, select the ones that meet

the following conditions:

Base: BA9S/13

Overall length: 26 mm max.

Power consumption: 2.6 W max.

When DC-specific LEDs are used, wire the Switch so that the X1

terminal is positive.

•Mis-lighting of the LED

The LED lights with approx. 0.1 mA or less of micro-current. Take

a countermeasure like adding a resistor to prevent mis-lighting in

parallel to the LED.

The micro-current varies with the machine (leak current or stray

capacity between cables, etc.). Select resistance value and

allowable power consumption that meet the actual current.

Others

•If the panel is to be finished with coating, etc., make sure that the

panel meets the specified dimensions after the coating.

•Do not subject the Switch to extreme shock or vibration. Doing so

will cause malfunctions and damage to the Switch.

Using the Microload

•Insert a contact protection circuit, if necessary, to prevent the

reduction of life expectancy due to extreme wear on the contacts

caused by loads where inrush current occurs when the contact is

opened and closed.

The minimum applicable load is the N-level reference value. This

value indicates the malfunction reference level for the reliability

level of 60% (λ 60) (conforming to JIS C5003).

The equation, λ 60 = 0.5 x 10−6/operations indicates that the

estimated malfunction rate is less than 1/2,000,000 operations with

a reliability level of 60%.

WARNING

Precautions for Correct Use

8 mm max. 8 mm max.

16.0 mm max. 16.0 mm max.

8 mm max.

20.2 mm max.

8 mm max.

20.2 mm max.

LED

lamp R:10kΩ (1W)

Bleeder resistor

(Circuit example)

In case of using 24 VAC/VDC, Direct lighting

Microload area Standard

load area

Invalid

area

0.1 1 10 100 1,000

10 mA

1 mA

30 0.16 mA 1.6 mA 100 mA

Current (mA)

Voltage (V)

A22

Application

Mounting to the Panel

Panel Hole Dimensions

•Panel hole dimensions are given below.

•Recommended panel thickness: 1 to 5 mm.

•For 25-dia. holes, always use 25-dia. Rings. (Since the cutout

dimensions are large, IP65 cannot be guaranteed unless 25-dia.

Rings are used.)

•If outer surface treatment such as coating is performed for the

panel, the panel dimensions after outer surface treatment must

meet the specified panel dimensions.

Matrix Installation

1. The following panel hole dimensions

apply when Switch Unit and the

Standard-size Legend Plate Frame and

Lock Ring are mounted, and lead wires

are connected directly to the Switch

Block.

2. The following panel hole dimensions

apply when the Large-size Legend Plate Frame is mounted, and

when crimp terminals are connected to the Switch Block terminals.

For 1. above:

For 2. above:

Note:1. The above dimensions are the minimum dimensions for when the wires

described under Applicable Wire Size on page 23 are use d. If a

different wires are used, the wiring dimensions may be different so

determine an appropr iate pitch before setup.

2. With pushbuttons of external di mensions greater than 30 mm, set the

pitch according to the dimensions. (Whe n using matrix installation for

the A22-M@, mount with a pitch of 40 mm instead of 30 mm in the

diagram above.)

Mounting the Operation Unit on the Panel

•

Insert the Operation Unit (Pushbutton, etc.) from the front surface of the

panel, insert the Lock Ring and the mounting nut from the terminal side,

then tighten the nut. Before tightening, check that the rubber washer is

present between the Pushbutton Unit and the panel.

•When using a Legend Plate Frame, put one rubber washer each

between the Legend Plate Frame and the panel and between the

Operation Unit and the Legend Plate Frame. (One rubber washer

will be provided when one Legend Plate Frame is ordered.)

•Align the Lock Ring with the groove in the casing, then insert the

Lock Ring so that its edge is located on the panel side.

22.3+0.4

+0.2

+0.4

22.3

25 dia.

22 dia.

+0.4

025+0.5

3.2

24.1

0.8R max.

Not Using a Lock Ring Using a Lock Ring

Switch Blocks A

A22-10, A22-10S

A22-01, A22-01S 45 mm min.

A22-20, A22-20 S, A22-02

A22-02S, A22-11, A22-11S 55 mm min.

Type of crimp te rminal Switch Blocks B

Bare crimp terminals

A22-10, A22-10S

A22-01, A22-01S 51 mm min.

A22-20, A22-20S , A22-02

A22-02S, A22-11 , A22-11S 61 mm min.

Crimp terminals with

insulating sheath

A22-10, A22-10S

A22-01, A22-01S 60 mm min.

A22-20, A22-20S , A22-02

A22-02S, A22-11 , A22-11S 70 mm min.

Pitches A and B between the center s of the mounting holes are as follows:

A22

•Tighten the mounting nut at a torque of 0.98 to 1.96 N·m.

•When using a Lock Ring, replace with the supplied Lock Ring,

insert the projecting part into the lock slot, and then tighten the

mounting nut.

•

When the panel cutout dimension is 25 dia., remove the supplied

rubber washer and mount the 25-dia. Ring as shown below. (Since the

A22Z-R25 is not attached to the main body, order separately.)

Mounting the Switch on the Pushbutton Unit

•Insert the Pushbutton Unit into the Switch Unit, aligning the arrow

mark inscribed on the Case with the lever on the Switch Blocks,

then move the lever in the direction indicated by the arrow in the

following figure.

Removing the Switch

•Move the lever in the

direction indicated by the

arrow in the following figure,

then pull the Pushbutton

Unit or the Switch Blocks.

Since the lever has a hole

with an inside diameter of

6.5 mm, the lever can be

moved in the specified

direction by inserting a

screwdriver into the hole and

then moving the

screwdriver.

Mounting/Replacing the Color Cap

Projection, Fall-guard

•Grip and rotate the Color Cap with your fingers.

Half-guard Indicators

•Put the tips of the Cap Tightening Tool (A22Z-3908) into the Color

Cap slot and turn the Tool.

Assembling the Cap

Lighted Pushbutton Switch

•Mount the Color Cap so that the protrusions inside the cap fit into

the grooves in the Pushbutton Unit.

Indicator

•Mount the Color Cap so that the protrusions inside the Pushbutton

Unit fit into the grooves in the cap.

Hold here Rubber washer

Mounting nut

Panel

Projecting

part

Lock Ring

Panel

Lock Ring

22.3 dia.

0.5 1.3

Lock Ring

Mounting nut

Panel 25 dia.

25 dia.

22.3 dia.

25-dia. Ring (A22Z-R25)

22 dia.

Operation Unit

Arrow mark

Lever

Screwdriver

Protrusion

inside cap

Color Cap

Protrusion

Grooves

Cap

Color Cap

A22

Square Pushbutton/Indicator

•Square Pushbutton/Indicator

Insert the protruding tip of the Cap Puller (A3PJ-5080) into the Cap

slot, hold the plate spring, and pull them to remove the Color Cap.

•Mounting the Color Cap:

Mount the Color Cap on the flange and firmly push the Color Cap.

When the Color Cap is inserted, check whether it operates properly.

When replacing the Lamp, remove the Color Cap and diffusion

plate with fingers or Cap Puller.

Attach the Character Film properly so that it fits inside the

protruding part of the diffusion plate. Then, match the diffusion plate

to the square flange and insert the Cap.

Emergency Stop Switch

•Insert the protrusion of the Tightening Wrench (A22Z-3905) into the

Cap slot and then turn to remove the Cap.

Installing/Replacing the Lamp

Installing/Replacing from the Panel Surface

•Insert the Lamp Extractor (A22Z-3901) into the lamp, then rotate

the Extractor while pressing it.

Installing/Replacing on the Switch

•Grip the lamp with your fingers, then rotate the lamp while pressing

it against the Switch.

Control Box (Enclosure)

Mounting the Switch

The Standard-size Legend Plate Frame can be mounted. Mount the

Frame as shown in the following diagram. Mount the Switch in the

same way as for an ordinary panel.

Creating a Cable Port Hole

Place the tip of a screwdriver on the surface where the cable port hole

is to be created with the cover attached and strike the screwdriver with

a hammer to punch four holes.

Plate spring

Flange

Diffusion plate

Character Film

Color Cap

Snap-in Legend Plate

Switch box

Screwdriver

Groove

Side

Make four holes

in diagonal lines.

Cover

Cable port hole

A22

Securing the Connector Cable

1. Insert the connector into the cable port hole in the Box and secure

with the fixing nut inside the box.

2. Open a hole in the thin rubber section of the rubber ring.

3. Pass the tightening cap through the cable, insert the cable into the

connector, and tighten the hexagonal nut to secure the cable.

Switch Blocks

Installing the Switch Blocks

•Hook the small protrusion on the Switch Block into the groove on

the Mounting Latch on the other side of the lever, then push up the

Switch Block in the direction indicated by the arrow in the figure

below.

Removing the Switch Blocks

•Insert a screwdriver between the Mounting Latch and the Switch

Block, then push down the screwdriver in the direction indicated by

the arrow in the following figure.

Wiring

Wiring Round Crimp Terminals

•Loosen the terminal screw from the Switch Unit until it completely

comes off the groove, insert a screwdriver as shown in the following

figure, then push up the washer in the direction indicated by the

arrow to temporarily secure it. Now, a round crimp terminal can be

connected. After inserting the terminal, tighten the screws to

complete wiring.

Engraving

•Engrave the characters on the surface on the

Cap. Make sure that the characters are

aligned parallel to the imaginary line

connecting the two protruding portions to the

left and right of the Cap.

•The characters must not be engraved deeper

than 0.5 mm. Apply an alcohol-based paint

coating, such as melamine, alkyd, or acrylic

resin paint coating, to the engraved

characters.

Cable diameter Connector

7 to 9 dia. A22Z-3500-1

9 to 11 dia. A22Z-3500-2

Fixing nut Rubber washer

Connector Tightening cap Cable

Inside Outside

Box

Mounting

Latch

Lever

Protrusion

Switch Block

Use either of the following screwdrivers.

Flat-head

screwdriver

Phillips

screwdriver

3 to 6 mm

Screwdriver

Washer

Screw

Protruding portions

on Cap

A22

Affixing Character Film

•Hold the Cap, remove the cardboard on the Film, and attach the

Film to the Cap. Make sure that the protruding portions of the Cap

engage he cutout portions of the Film and that the characters are

aligned parallel to the imaginary line connecting the two protruding

portions to the left and right of the Cap.

Mounting and Dismo un ting Snap-in Legend

•Press and secure the Snap-in Legend Plate onto the Legend Plate

Frame.

•The direction of the characters will vary with the mounting direction

of the control panel if the Switch is a knob or key selector model.

•To easily remove the Snap-in Legend Plate from the Legend Plate

Frame mounted to the panel, insert a Tool with a thin tip into the

space between the Snap-in Legend Plate and the Legend Plate

Frame.

•The Snap-in Legend Plate is easily removed by pressing the Snap-

in Legend Plate from the back of the Legend Plate Frame.

•The Legend Plate Frame is made of acrylic resin, which is easily

damaged by shock. Be sure to handle the Legend Plate Frame with

care.

Engraving Method

Material: Acrylic

•Engrave the characters directly on the matted side of the Snap-in

Legend Plate.

•The characters must be engraved no deeper than 0.5 mm.

•Apply alcohol-based paint coating to the engraved characters.

•If the Snap-in Legend Plate is transparent, engrave the mirror-

written characters on the back of the Snap-in Legend Plate and

apply paint coating to the characters. Then apply paint coating of a

different color to the remaining part of the Snap-in Legend Plate.

Mounting Three-throw Spacer

Press and secure the two protruding portions of the Three-throw

Spacer to the two indented portions of the inner side of the control

panel.

Protruding portions on Cap

Remove the

cardboard.

Legend Plate Frame

Snap-in Legend Plate

Concave surface

A22

Mounting the 30-dia. Resin Attachment

Pushbutton

Rubber washer

(Operation Unit mounting part)

Rubber washer (included)

Mounting panel

Lock Ring

Mounting nut

Attachment

Read and Understand This Catalog

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or

comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)

from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR

FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS

IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT

LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT

SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's

application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the

products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,

machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible

uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:



Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.



Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.



Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE

SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND

INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or

establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the

result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON

Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

2013.1

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Omron:

A22L-01A A22L-01A-T1 A22L-01A-T2 A22L-01M A22L-01M-T1 A22L-01M-T2 A22L-02A A22L-02A-T1 A22L-

02A-T2 A22L-02M A22L-02M-T1 A22L-02M-T2 A22L-10A A22L-10A-T1 A22L-10A-T2 A22L-10M A22L-10M-T1

A22L-10M-T2 A22L-11A A22L-11A-T1 A22L-11A-T2 A22L-11M A22L-11M-T1 A22L-11M-T2 A22L-20A A22L-20A-

T1 A22L-20A-T2 A22L-20M A22L-20M-T1 A22L-20M-T2