S/MON/SV861394/A/30/12/1999 page 1 /2 F/GB Relais statique monophase de puissance Power Solid State Relay SV861394 10-32VDC control 12A/400VAC output * Sortie AC synchrone : 24-500VAC-12A * Adapte a tout type de charges * Protection RC/VDR - Boitier IP2L0 * 24-500VAC -12A Zero-Cross AC Output. * Designed for all types of loads * RC/VDR protection - IP2LO housing Dimensions/Size Application typique/Typical application 45 24-500VAC protection reseau line protection 44,5 28 - O4,7 4- 1 3+ 2 Entree control 10-32VDC + 47,6 43,2 61,3 9 M4 6,8 * 1-2 peuvent etre inversees/ 1 -2 can be changed * le relais doit etre monte sur dissipateur thermique / SSR must be mounted on a heatsink M3,5 CHARGE/ LOAD 25,4 Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Symbol Uc Ic Uc off Rc Urv DC Nom Min 10 8 1 fig1 : Caracteristique d'entree / Control characteristic Max 32 25 1250 30 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/Rated impulse voltage Uimp 4000 Unit V mA V V 24 22 20 18 16 Ic (mA) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Resistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage fig. 1 :Caracteristique d'entree / Control characteristic 14 12 10 8 6 4 2 VRMS VRMS V 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Uc (V) Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. Conditions Symbol Typ. 135 -40 / +100 -40 / +100 Unit g C C celduc r e l a i s S/MON/SV861394/A/30/12/1999 page 2 / 2 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete (ecreteur de tension) / Peak voltage (clamping voltage) Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity Conditions Symbol Typ. Unit Ue 400 V rms Ue min-max 24-500 V rms Up 1200(800) V Usync 12 V Ie nom Ua 10 V ( see Fig. 2 ) Ie AC-51 12 A rms ( see Fig. 2 ) Ie AC-53 2,5 A rms tp=10ms (Fig. 3) Itsm 120 A @ Ie nom Vd 1,5 V @Ue, 50Hz Ilk <2,5 mA Ie min 5 mA Uc nom DC ,f=50Hz ton max 10 ms Uc nom DC ,f=50Hz toff max 10 ms f 0,1-440 Hz dv/dt 2000 V/s di/dt 50 A/s I2t 72 A2s IEC 1000-4-4 (burst) 4kV criterion A IEC 1000-4-5(schocks) 4kV crit.A EN60947-4-x T case max (C) Fig. 2 Courbes thermiques / Thermal characteristics Pd ( watts) 1,6K/W 20 2,2K/W 18 85 1,1K/W 90 4K/W Full on state 16 95 14 6K/W 100 12 10 50% on state 8 6 4 2 0 0 1 2 3 4 5 6 7 8 10 9 11 12 0 10 20 30 40 50 60 RMS load current : I (A) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 10A(Itsm=120A) / Surge current : Itsm (Apeak) = f(t) for 10A models with Itsm =120A 80 90 100 110 120 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 150 Itsm (Apeak) 70 Ambient temperature : Tamb (C) 100 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied 50 Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 0 0,01 0,1 1 10 t(s) Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i www.celduc.com s Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19