52.40 ______ 300.0425.0 17.9 | | | 10.0 - f 2X G5.00 os 59.8 ~ pi pen PORT (P1) v 7 | ( Z ~ MICRO SWITCH 6.1 | 1 30.0 P P2 )/ ! $16, 2 eye 12. 3> 2X B3.52 MOUNTING HOLES OUTPUT VOLTAGE PROPORTIONAL TO SUPPLY VOLTAGE OVER ABOVE RECOMMENDED RANGE SHORT CIRCUIT LIMIT MAY BE SHORTED INDEFINITELY OUTPUT RIPPLE NONE GROUND REFERENCE SUPPLY AND OUTPUT ARE COMMON MECHANICAL SHOCK MIL-STD-202 METHOD 213 TEST CONDITION A VIBRATION SINE SWEEP MIL-STD-202 METHOD 204 ELECTRICAL PERFORMANCE AT 25C AND 8.00+.01 VDC SUPPLY ro-ssuis-B 1() | 9 | 3 | / | 6 t 9 4 | 3 | C | SAY NUMBER REV} DUCUMENT CHANGED BY CHECK 142PC95AW71 7 C | 0072603 | BM 21DEC10 | DSK GS-8) - a 12.6 36 | - - GENERAL OPERATING CHARACTERISTICS PRESSURE RANGE 0 TO 95 PSIA OVERPRESSURE 140 PSIA MAX AT 55C TEMPERATURE RANGES | STORAGE 55 TO +125C OPERATE 5 TO 55C COMPENSATED 5 TO 45C GREEN A\ SUPPLY VOLTAGE 7 TO 16 VDC BLACK SUPPLY CURRENT 20mA MAX WITH 10K LOAD OUTPUT VOLTAGE NULL (0 PSIA) 1.000 VDC TYP REFERENCE (14.7 PSIA) 1.773 40.050 VDC FULL SCALE (95 PSIA) 6.000 VDC TYP P1 > P2 SPAN (2 TO 95 PSIA) 4.227+ 150 VDC SENSITIVITY 52.63 mV/PSI_ TYP LINEARITY (B.F.S.L.) .89% SPAN MAX HYSTERESIS & REPEATABILITY 18% SPAN TYP TEMPERATURE ERROR +5C TO +45C 1.77% SPAN MAX RELEASE NO: PR-17830 Ne NPUT MEDIA: DESIGN UNITS: MM DRAWN] MBH 13JUL09 P1 DRY GASES ONLY: CONNECTION SIDE OF SENSOR TOLERANCES UNLESS NOTED: 2 TERMINALS ARE PLATED FOR SOLDERING CHECK AK 13JULO9 Honeywell 3 {Ar Sake 1 Ser nt Fo seco wa anc ot __ | AT OVE RTT Z\ STRIPPED & TINNED LEAD ENDS TO BE 5.0 MAX DNE PLACE x # 0.4 (TITLE 6 NO CHANGE TO MATERIALS WITHOUT VALIDATION AT TWO PLACE yO ois | THIS DRAWING IS NOT TO BE COPIED OR USED PRESSURE TRANSDUCER 125 PSI AT OPERATING TEMPERATURES. TREE PLACE sok ; WITHOUT THE PERMISSION OF HONEYWELL. ANGLES X + - INTERPRET PER ASME Y14,.5M-1994 SIZE |TYPE [CAGE COUDE|DRAWING NAME REV OTHER HONEYWELL ENGINEERING 442PCO5AW71 THIRD ANGLE PROJECTION FL DAO Ne MAY Mopre A's] | - C95 Cc 464+ RASTER SCALE - SHEET 1 OF 1 10 | 9 | 8 ] | 6 a 9 4 | 3 | C | |