Technical Data August, 2010 3MTM TrizactTM Lapping Film Aluminum Oxide 269XA Product Description Converted Forms A microreplicated abrasive film product using tightly Sheets, Discs and Rolls. graded aluminum oxide minerals coated onto a polyester Maximum width 25". film backing. Available with PSA (Pressure Sensitive Adhesive). Backing Polyester Film Applications Nominal thickness: 3 mil. * Flat lapping * Cullet removal Mineral Size Grading Chart * Glass, metal, plastic processing and repair Micron Grade Color (nominal) Key Features - Long life - Produces excellent surface finish - Consistent cut rates - Reduces overall process time 5 Orange 10 Blue 20 Pink 35 Green - Produces high yields - Non-slurry processing Storage and Shelf Life Recommended Storage Conditions: Product I.D. 50-90F at 30-70% relative humidity. Product ID Product ID (plain back) (with PSA backing) 269XA 269XA Backing It is recommended that product be used within 24 months of purchase. 3 mil 3 3MTM TrizactTM Lapping Film Aluminum Oxide 269XA Certification/Recognition Important Notice MSDS: 3M has prepared an MSDS for this product, All statements, technical information, and recommendations although it is not subject to the MSDS requirements of the related to 3M's products are based on information believed Occupational Safety and Health Administration's Hazard to be reliable, but the accuracy or completeness is not Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). guaranteed. Before using this product, you must evaluate it When used under reasonable conditions or in accordance and determine if it is suitable for your intended application. with the 3M directions for use, the product should not You assume all risks and liability associated with such use. present a health and safety hazard. However, use or Any statements related to the product which are not processing of the product in a manner not in accordance contained in 3M's current publications, or any contrary with the directions for use may affect its performance and statements contained on your purchase order shall have no present potential health and safety hazards. force or effect unless expressly agreed upon, in writing, by TSCA: This product is defined as an article under the an authorized officer of 3M. Toxic Substances Control Act and therefore, it is exempt from inventory listing requirements. Warranty; Limited Remedy; Limited Liability. RoHs Complaint/REACH Compliant: This product complies with the European Union's "Restriction of Hazardous Substances" (RoHs) initiative and with European REACH regulations 2002/95/EC and 2005/618/EC. This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive For Additional Information To request additional product information or to arrange for sales assistance, call toll free 1-866-599-4227. Address correspondence to: 3M, Electronics Markets Materials Division, 3M Center, Building 225-3S-06, remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M St. Paul, MN 55144-1000. Our fax number is 651-778-4244 or 1-877-369-2923. product, regardless of the legal theory asserted. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00. 3 Electronics Markets Materials Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 1-866-599-4227 phone 651-778-4244 fax www.3M.com/electronics 3M and Trizact are trademarks of 3M Company. Please recycle. Printed in U.S.A. (c) 3M 2010. All rights reserved. 60-5002-0468-4 3