Vishay General Semiconductor
FEP(F,B)16AT thru FEP(F,B)16JT
Document Number 88596
03-May-06
www.vishay.com
1
123
CASE
PIN 2
PIN 1
PIN 3
TO-220AB
FEP16xT
ITO-220AB
FEPF16xT
FEPB16xT
PIN 1
PIN 2
K
HEATSINK
1
23
1
2
K
PIN 2
PIN 1
PIN 3
TO-263AB
Dual Common-Cathode Ultrafast Plastic Rectifier
FEATURES
• Glass passivated chip junction
• Ultrafast recovery time
• Low switching losses, high efficiency
• High forward surge capability
• AEC-Q101 qualified
• Meets MSL level 1, per J-STD-020C (for
TO-263AB package)
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode
power supplies, inverters, freewheeling diodes,
dc-to-dc converters, and other power switching
application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAJOR RATINGS AND CHARACTERISTICS
IF(AV) 8.0 A x 2
VRRM 50 V to 600 V
IFSM 200 A, 125 A
trr 35 ns, 50 ns
VF0.95 V, 1.30 V, 1.50 V
Tj max. 150 °C
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL FEP
16AT
FEP
16BT
FEP
16CT
FEP
16DT
FEP
16FT
FEP
16GT
FEP
16HT
FEP
16JT UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V
Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V
Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V
Maximum average forward rectified
current at TC = 100 °C IF(AV) 16 A
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated
load per leg
IFSM 200 125 A
Operating storage and temperature range TJ, TSTG - 55 to +150 °C
Isolation voltage (ITO-220AB only)
From terminal to heatsink t = 1 minute VAC 1500 V
www.vishay.com
2
Document Number 88596
03-May-06
Vishay General Semiconductor
FEP(F,B)16AT thru FEP(F,B)16JT
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL FEP
16AT
FEP
16BT
FEP
16CT
FEP
16DT
FEP
16FT
FEP
16GT
FEP
16HT
FEP
16JT UNIT
Maximum instantaneous
forward voltage per leg (1) at 8.0 A VF 0.95 1.30 1.50 V
Maximum DC reverse
current per leg at rated DC
blocking voltage
TC = 25 °C
TC = 100 °C IR 10
500 µA
Maximum reverse
recovery time per leg
at IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A trr 35 50 ns
Typical junction
capacitance per leg at 4.0 V, 1 MHz CJ 85 60 pF
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL FEP FEPF FEPB UNIT
Typical thermal resistance from junction to case per leg RθJC 2.2 3.1 2.2 °C/W
ORDERING INFORMATION
PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE
TO-220AB FEP16JT-E3/45 1.85 45 50/Tube Tube
ITO-220AB FEPF16JT-E3/45 1.97 45 50/Tube Tube
TO-263AB FEPB16JT-E3/45 1.35 45 50/Tube Tube
TO-263AB FEPB16JT-E3/81 1.35 81 800/Reel Tape Reel
Figure 1. Forward Current Derating Curve
050 100 150
0
4
8
12
16
20
Average Forward Current (A)
Case Temperature (°C)
Resistive or Inductive Load
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
110 100
0
50
100
150
200
250
300
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
T
C
= 100 °C
8.3 ms Single Half Sine-Wave
Document Number 88596
03-May-06
www.vishay.com
3
FEP(F,B)16AT thru FEP(F,B)16JT
Vishay General Semiconductor
Figure 3. Typical Instantaneous Forward Characteristics Per Leg
Figure 4. Typical Reverse Characteristics Per Leg
0.2 0.6
0.4 0.81.0 1.2 1.4 1.6 1.82.0
0.1
1
10
40
InstantaneousForward Voltage (V)
InstantaneousForward Current (A)
50 - 400 V
300 - 400 V
500 - 600 V
TJ = 125 °C
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
020 40 60 80100
0.1
0.01
1
10
100
50 - 400 V
500 - 600 V
TJ = 100 °C
TJ = 125 °C
TJ = 25 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Leakage
Current (µA)
Figure 5. Typical Junction Capacitance Per Leg
0.1 110 100
10
100
1000
Reverse Voltage (V)
Junction Capacitance (pF)
50 - 400 V
500 - 600 V
T
J
= 125 °C
f = 1.0 MHz
V
sig
= 50 mVp-p
www.vishay.com
4
Document Number 88596
03-May-06
Vishay General Semiconductor
FEP(F,B)16AT thru FEP(F,B)16JT
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
1
3
PIN
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.145 (3.68)
0.135 (3.43)
0.350 (8.89)
0.330 (8.38)
0.560 (14.22)
0.530 (13.46)
0.022 (0.56)
0.014 (0.36)
0.110 (2.79)
0.100 (2.54)
0.603 (15.32)
0.573 (14.55)
0.154 (3.91)
0.148(3.74)
0.113 (2.87)
0.103 (2.62)
0.160 (4.06)
0.140 (3.56)
0.635 (16.13)
0.625 (15.87)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.028(0.70)
0.104 (2.65)
0.096 (2.45)
0.035 (0.90)
0.205 (5.20)
0.195 (4.95)
0.105 (2.67)
0.095 (2.41)
0.057 (1.45)
0.045 (1.14)
2
1.148(29.16)
1.118(28.40)
0.404 (10.26)
0.384 (9.75)
See note
0.076 Ref.
(1.93) ref.
45° Ref.
0.600 (15.24)
0.580 (14.73) PIN
12
0.560 (14.22)
0.530 (13.46)
0.025 (0.64)
0.015 (0.38)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.057 (1.45)
0.045 (1.14)
0.191 (4.85)
0.171 (4.35)
0.671 (17.04)
0.651 (16.54)
0.076Ref.
(1.93)Ref.
See note
7° Ref.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
7° Ref.
0.350 (8.89)
0.330 (8.38)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° Ref.
0.110 (2.79)
0.100 (2.54)
0.028(0.71)
0.020 (0.51)
ITO-220AB
Note: Copper exposure is allowablefor 0.005 (0.13) Max. from the body
3
0.080 (2.03)
0.065 (1.65)
0.105 (2.67)
0.095 (2.41)
0.380 (9.65)
0.411 (10.45)
0.320 (8.13)
0.360 (9.14)
0.591(15.00)
0.624 (15.85)
12
0.245 (6.22)
MIN
K
K
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.014 (0.36)
0.021 (0.53)
0.110 (2.79)
0.140 (3.56)
0.110 (2.79)
0.090 (2.29)
0.047 (1.19)
0.055 (1.40)
0-0.01 (0-0.254)
0.027 (0.686)
0.037 (0.940)
0.105 (2.67)
0.095 (2.41) 0.205 (5.20)
0.195 (4.95)
TO-263AB
0.105 (2.67)
0.08
(0.095) (2.41)
(2.032)
0.42
(10.66)
0.670 (17.02)
0.591 (15.00)
0.15
(3.81)
0.33
(8.38)
MountingPad Layout
MIN.
MIN.
MIN.
MIN.
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
