E3JK-DR11 2M - OMRON - Product.Network

New Product

Built-in Power Supply Photoelectric Sensor

E3JK <NEW>

Long-distance Photoelectric Sensor

That Supports AC/DC Power Supplies

• Long sensing distance that is approximately 8

times that of our conventional model (for the

Through-beam and Diffuse-reflective models).

(Through-beam: 40 m, Retro-reflective: 7 m, and

Diffuse-reflective: 2.5 m.)

• Improved visibility:

• A red LED that makes the spot visible.

• Large indicators that can be seen even from a

distance.

• Improved operability.

(Enlarged sensitivity adjuster and operation

selector)

• Freely selectable power supply input (24 to 240

VDC, 24 to 240 VAC).

(Additional types added to the DC type lineup.)

• Models with infrared LEDs are also available.

Applications

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Refer to the Safety Precautions on page

15.

Elevator cage detection

Pallet detection for agricultural produce conveyors

Workpiece detection for woodworking machines

Detection of packages jutting out from their storage location

E3JK

Ordering Information

Sensors

Sensors without Brackets or Reflectors

*1. Through-beam Sensors are sold in sets that include both the Emitter and Receiver.

*2. A Reflector is not included. Purchase a Reflector separately to match the intended use of the Sensor.

*3. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Power supply

voltage

Sensing method Appearance Sensing distance

Output

configu-

ration

Model

AC/DC power

supply

selectable

type

Through-beam *1

(Emitter + Receiver)

Relay

E3JK-TR11 2M

Emitter: E3JK-TR11-L 2M

Receiver: E3JK-TR11-D 2M

E3JK-TR12 2M

Emitter: E3JK-TR12-L 2M

Receiver: E3JK-TR12-D 2M

E3JK-TR13 2M

Emitter: E3JK-TR13-L 2M

Receiver: E3JK-TR13-D 2M

E3JK-TR14 2M

Emitter: E3JK-TR14-L 2M

Receiver: E3JK-TR14-D 2M

Retro-reflective

without MSR function

E3JK-RR11 2M

E3JK-RR13 2M

Retro-reflective

with MSR function

E3JK-RR12 2M

Diffuse-reflective

E3JK-DR11 2M

E3JK-DR12 2M

E3JK-DR13 2M

E3JK-DR14 2M

Red light Infrared light

40 m

5 m

40 m

5 m

7 m

[100 mm]

(When using E39-R1)

11 m

[100 mm]

(When using E39-R2)

7 m

[100 mm]

(When using E39-R1)

11 m

[100 mm]

(When using E39-R2)

6 m

[100 mm]

(When using E39-R1)

10 m

[100 mm]

(When using E39-R2)

2.5 m

300 mm

2.5 m

300 mm

E3JK

*1. Through-beam Sensors are sold in sets that include both the Emitter and Receiver.

*2. A Reflector is not included. Purchase a Reflector separately to match the intended use of the Sensor.

*3. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Power supply

voltage

Sensing method Appearance Sensing distance

Output

configu-

ration

Model

Through-beam *1

(Emitter + Receiver)

NPN

E3JK-TN11 2M

Emitter: E3JK-TN11-L 2M

Receiver: E3JK-TN11-D 2M

PNP

E3JK-TP11 2M

Emitter: E3JK-TP11-L 2M

Receiver: E3JK-TP11-D 2M

NPN

E3JK-TN12 2M

Emitter: E3JK-TN12-L 2M

Receiver: E3JK-TN12-D 2M

PNP

E3JK-TP12 2M

Emitter: E3JK-TP12-L 2M

Receiver: E3JK-TP12-D 2M

NPN

E3JK-TN13 2M

Emitter: E3JK-TN13-L 2M

Receiver: E3JK-TN13-D 2M

PNP

E3JK-TP13 2M

Emitter: E3JK-TP13-L 2M

Receiver: E3JK-TP13-D 2M

NPN

E3JK-TN14 2M

Emitter: E3JK-TN14-L 2M

Receiver: E3JK-TN14-D 2M

PNP

E3JK-TP14 2M

Emitter: E3JK-TP14-L 2M

Receiver: E3JK-TP14-D 2M

Retro-reflective

without MSR function

NPN E3JK-RN11 2M

PNP E3JK-RP11 2M

NPN E3JK-RN13 2M

PNP E3JK-RP13 2M

Retro-reflective

with MSR function

NPN E3JK-RN12 2M

PNP E3JK-RP12 2M

Diffuse-reflective

NPN E3JK-DN11 2M

PNP E3JK-DP11 2M

NPN E3JK-DN12 2M

PNP E3JK-DP12 2M

NPN E3JK-DN13 2M

PNP E3JK-DP13 2M

NPN E3JK-DN14 2M

PNP E3JK-DP14 2M

Red light Infrared light

40 m

5 m

40 m

5 m

7 m

[100 mm]

(When using E39-R1)

11 m

[100 mm]

(When using E39-R2)

7 m

[100 mm]

(When using E39-R1)

11 m

[100 mm]

(When using E39-R2)

6 m

[100 mm]

(When using E39-R1)

10 m

[100 mm]

(When using E39-R2)

2.5 m

300 mm

2.5 m

300 mm

E3JK

Sensors

Sensors with Brackets and Reflectors (The model numbers contain (“-C.”)

*1. Through-beam Sensors are sold in sets that include both the Emitter and Receiver.

*2. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Power supply

voltage

Sensing method Appearance Sensing distance

Output

configu-

ration

Model

AC/DC power

supply

selectable

type

Through-beam *1

(Emitter + Receiver)

Relay

E3JK-TR11-C 2M

Emitter: E3JK-TR11-L 2M

Receiver: E3JK-TR11-D 2M

E3JK-TR12-C 2M

Emitter: E3JK-TR12-L 2M

Receiver: E3JK-TR12-D 2M

E3JK-TR13-C 2M

Emitter: E3JK-TR13-L 2M

Receiver: E3JK-TR13-D 2M

E3JK-TR14-C 2M

Emitter: E3JK-TR14-L 2M

Receiver: E3JK-TR14-D 2M

Retro-reflective

without MSR function

E3JK-RR11-C 2M

E3JK-RR13-C 2M

Retro-reflective

with MSR function

E3JK-RR12-C 2M

Diffuse-reflective

E3JK-DR11-C 2M

E3JK-DR12-C 2M

E3JK-DR13-C 2M

E3JK-DR14-C 2M

Red light Infrared light

40m

40 m

5 m

[100mm]

(When using E39-R1)

11m

[100mm]

(When using E39-R2)

7 m

[100 mm]

(When using E39-R1)

11 m

[100 mm]

(When using E39-R2)

[100mm]

(When using E39-R1)

10m

[100mm]

(When using E39-R2)

2.5m

300mm

2.5 m

300 mm

E3JK

Accessories (Order Separately)

Reflectors (A Reflector is required for each Retro-reflective Sensor.) [Refer to Dimensions on page 17.]

The E39-R1 is enclosed with Sensors with model numbers that contain “-C.”

Note: Refer to Engineering Data on page 12 for details.

*Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Mounting Bracket [Refer to Dimensions on page 17.]

A Mounting Bracket is enclosed with Sensors with model numbers that contain “-C.”

Note: 1. When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter.

2. For details, refer to Mounting Brackets on E39-L/E39-S/E39-R which can be accessed from your OMRON website.

Name Sensing distance (rated value) Model Quantity

Reflectors

E3JK-R@11 7 m [100 mm] *

E39-R1 1E3JK-R@12 6 m [100 mm] *

E3JK-R@13 7 m [100 mm] *

E3JK-R@11 9 m [100 mm] *

E39-R1S 1E3JK-R@12 7 m [100 mm] *

E3JK-R@13 9 m [100 mm] *

E3JK-R@11 11 m [100 mm] *

E39-R2 1E3JK-R@12 10 m [100 mm] *

E3JK-R@13 11 m [100 mm] *

Appearance Model Quantity

E39-L40 1

E3JK

Ratings and Specifications

Sensing method

Through-beam

Item Model E3JK-TR11-@E3JK-TR12-@E3JK-TR13-@E3JK-TR14-@

Sensing distance 40 m 5 m

40 m 5 m

Standard sensing object Opaque: 17-mm dia. min.

Differential travel −

Directional angle Both Emitter and Receiver 3° min.

Light source (wavelength) Red LED (624 nm) Infrared LED (850 nm)

Power supply voltage

24 to 240 VDC ±10%,

ripple (p-p): 10% max.

24 to 240 VAC ±10%, 50/60 Hz

Power

consumption

DC 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.)

AC 3 W max. (Emitter 1.5 W max. Receiver 1.5 W max.)

Control output

Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1),

5 VDC, 10 mA min.,

Light-ON/Dark-ON selectable

Protection circuits −

Life

expectancy

(relay output)

Mechanical 50,000,000 times min. (switching frequency: 18,000 times/h)

Electrical 100,000 times min. (switching frequency: 1,800 times/h)

Response time 20 ms max.

Sensitivity adjustment One-turn adjuster Receiver (E3JK-TR1@-D) only

Ambient illumination

(Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.

Ambient temperature range Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)

Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance 20 MΩ min. at 500 VDC

Dielectric strength 1,500 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Malfunction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Shock

resistance

Destruction 500 m/s2 for 3 times each in X, Y, and Z directions

Malfunction 100 m/s2 for 3 times each in X, Y, and Z directions

Degree of protection IEC 60529 IP64

Connection method Pre-wired (standard length: 2 m)

Weight (packed state) Approx. 350 g

Material

Case ABS (Acrylonitrile Butadiene Styrene)

Lens/Display

window Methacrylic resin

Adjuster POM

Cable PVC

Bending radius of cable R18

Accessories Instruction manual and Mounting Bracket (E3JK-TR1@-C only)

E3JK

*Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Sensing method

Retro-reflective (without MSR function) Retro-reflective

(with MSR function)

Item Model E3JK-RR11-@E3JK-RR13-@E3JK-RR12-@

Sensing distance 7 m [100 mm]* (When using E39-R1), 11 m [100 mm]*

(When using E39-R2)

6 m [100 mm]* (When using

E39-R1), 10 m [100 mm]* (When

using E39-R2)

Standard sensing object Opaque: 75-mm dia. min. (When using E39-R1), Opaque: 100-mm dia. min. (When using E39-R2)

Differential travel −

Directional angle 1.5° min.

Light source (wavelength) Red LED (624 nm) Infrared LED (850 nm) Red LED (624 nm)

Power supply voltage

24 to 240 VDC ±10%,

ripple (p-p): 10% max.

24 to 240 VAC ±10%, 50/60 Hz

Power

consumption

DC 2 W max.

AC 2 W max.

Control output

Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1),

5 VDC, 10 mA min.,

Light-ON/Dark-ON selectable

Protection circuits Mutual interference prevention function

Life

expectancy

(relay output)

Mechanical 50,000,000 times min. (switching frequency: 18,000 times/h)

Electrical 100,000 times min. (switching frequency: 1,800 times/h)

Response time 20 ms max.

Sensitivity adjustment One-turn adjuster

Ambient illumination

(Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.

Ambient temperature range Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)

Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance 20 MΩ min. at 500 VDC

Dielectric strength 1,500 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Malfunction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Shock

resistance

Destruction 500 m/s2 for 3 times each in X, Y, and Z directions

Malfunction 100 m/s2 for 3 times each in X, Y, and Z directions

Degree of protection IEC 60529 IP64

Connection method Pre-wired (standard length: 2 m)

Weight (packed state) Approx. 180 g

Material

Case ABS (Acrylonitrile Butadiene Styrene)

Lens/Display

window Methacrylic resin

Adjuster POM

Cable PVC

Bending radius of cable R18

Accessories Instruction manual, Mounting Bracket (E3JK-RR1@-C only), and Reflector (E3JK-RR1@-C only)

E3JK

Sensing method

Diffuse-reflective

Item Model E3JK-DR11-@E3JK-DR12-@E3JK-DR13-@E3JK-DR14-@

Sensing distance White paper

(300 × 300 mm): 2.5 m

White paper

(100 × 100 mm): 300 mm

White paper

(300 × 300 mm): 2.5 m

White paper

(100 × 100 mm): 300 mm

Standard sensing object −

Differential travel 20% max. of sensing distance

Directional angle −

Light source (wavelength) Red LED (624 nm) Infrared LED (850 nm)

Power supply voltage

24 to 240 VDC ±10%,

ripple (p-p): 10% max.

24 to 240 VAC ±10%, 50/60 Hz

Power

consumption

DC 2 W max.

AC 2 W max.

Control output

Relay output SPDT, 250 VAC, 3 A max. (cosϕ= 1),

5 VDC, 10 mA min.,

Light-ON/Dark-ON selectable

Protection circuits Mutual interference prevention function

Life

expectancy

(relay output)

Mechanical 50,000,000 times min. (switching frequency: 18,000 times/h)

Electrical 100,000 times min. (switching frequency: 1,800 times/h)

Response time 20 ms max.

Sensitivity adjustment One-turn adjuster

Ambient illumination

(Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.

Ambient temperature range Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)

Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance 20 MΩ min. at 500 VDC

Dielectric strength 1,500 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Malfunction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Shock

resistance

Destruction 500 m/s2 for 3 times each in X, Y, and Z directions

Malfunction 100 m/s2 for 3 times each in X, Y, and Z directions

Degree of protection IEC 60529 IP64

Connection method Pre-wired (standard length: 2 m)

Weight (packed state) Approx. 180 g

Material

Case ABS (Acrylonitrile Butadiene Styrene)

Lens/Display

window Methacrylic resin

Adjuster POM

Cable PVC

Bending radius of cable R18

Accessories Instruction manual and Mounting Bracket (E3JK-DR1@-C only)

E3JK

Sensing method

Through-beam

Model NPN output E3JK-TN11 E3JK-TN12 E3JK-TN13 E3JK-TN14

Item PNP output E3JK-TP11 E3JK-TP12 E3JK-TP13 E3JK-TP14

Sensing distance 40 m 5 m

40 m 5 m

Standard sensing object Opaque: 17-mm dia. min.

Differential travel −

Directional angle Both Emitter and Receiver 3° min.

Light source (wavelength) Red LED (624 nm) Infrared LED (850 nm)

Power supply voltage 10 to 30 VDC, including ripple (p-p): 10%

Power

consumption

DC 40 mA max. (Emitter 25 mA max. Receiver 15 mA max.)

AC −

Control output Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., open-

collector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable

Protection circuits Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity

protection

Life

expectancy

(relay output)

Mechanical −

Electrical −

Response time 1 ms max.

Sensitivity adjustment One-turn adjuster Receiver (E3JK-T@@@-D) only

Ambient illumination

(Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.

Ambient temperature range Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)

Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance 20 MΩ min. at 500 VDC

Dielectric strength 1,500 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Malfunction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Shock

resistance

Destruction 500 m/s2 for 3 times each in X, Y, and Z directions

Malfunction 500 m/s2 for 3 times each in X, Y, and Z directions

Degree of protection IEC 60529 IP64

Connection method Pre-wired (standard length: 2 m)

Weight (packed state) Approx. 300 g

Material

Case ABS (Acrylonitrile Butadiene Styrene)

Lens/Display

window Methacrylic resin

Adjuster POM

Cable PVC

Bending radius of cable R18

Accessories Instruction manual

E3JK

*Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.

Sensing method

Retro-reflective (without MSR function) Retro-reflective

(with MSR function)

Model NPN output E3JK-RN11 E3JK-RN13 E3JK-RN12

Item PNP output E3JK-RP11 E3JK-RP13 E3JK-RP12

Sensing distance 7 m [100 mm]* (When using E39-R1), 11 m [100 mm]*

(When using E39-R2)

6 m [100 mm]* (When using

E39-R1), 10 m [100 mm]* (When

using E39-R2)

Standard sensing object Opaque: 75-mm dia. min.

Differential travel −

Directional angle 1.5° min.

Light source (wavelength) Red LED (624 nm) Infrared LED (850 nm) Red LED (624 nm)

Power supply voltage 10 to 30 VDC, including ripple (p-p): 10%

Power

consumption

DC 30 mA max.

AC −

Control output Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., open-

collector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable

Protection circuits Power supply reverse polarity protection, Output short-circuit protection, Mutual interference

prevention function, and Output reverse polarity protection

Life

expectancy

(relay output)

Mechanical −

Electrical −

Response time 1 ms max.

Sensitivity adjustment One-turn adjuster

Ambient illumination

(Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.

Ambient temperature range Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)

Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance 20 MΩ min. at 500 VDC

Dielectric strength 1,500 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Malfunction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Shock

resistance

Destruction 500 m/s2 for 3 times each in X, Y, and Z directions

Malfunction 500 m/s2 for 3 times each in X, Y, and Z directions

Degree of protection IEC 60529 IP64

Connection method Pre-wired (standard length: 2 m)

Weight (packed state) Approx. 160 g

Material

Case ABS (Acrylonitrile Butadiene Styrene)

Lens/Display

window Methacrylic resin

Adjuster POM

Cable PVC

Bending radius of cable R18

Accessories Instruction manual

E3JK

Sensing method

Diffuse-reflective

Model NPN output E3JK-DN11 E3JK-DN12 E3JK-DN13 E3JK-DN14

Item PNP output E3JK-DP11 E3JK-DP12 E3JK-DP13 E3JK-DP14

Sensing distance White paper

(300 × 300 mm): 2.5 m

White paper

(100 × 100 mm): 300 mm

White paper

(300 × 300 mm): 2.5 m

White paper

(100 × 100 mm): 300 mm

Standard sensing object −

Differential travel 20% max. of sensing distance

Directional angle −

Light source (wavelength) Red LED (624 nm) Infrared LED (850 nm)

Power supply voltage 10 to 30 VDC, including ripple (p-p): 10%

Power

consumption

DC 30 mA max.

AC −

Control output Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., open-

collector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable

Protection circuits Power supply reverse polarity protection, Output short-circuit protection, Mutual interference

prevention function, and Output reverse polarity protection

Life

expectancy

(relay output)

Mechanical −

Electrical −

Response time 1 ms max.

Sensitivity adjustment One-turn adjuster

Ambient illumination

(Receiver side) Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max.

Ambient temperature range Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)

Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance 20 MΩ min. at 500 VDC

Dielectric strength 1,500 VAC, 50/60 Hz for 1 min

Vibration

resistance

Destruction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Malfunction 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions

Shock

resistance

Destruction 500 m/s2 for 3 times each in X, Y, and Z directions

Malfunction 500 m/s2 for 3 times each in X, Y, and Z directions

Degree of protection IEC 60529 IP64

Connection method Pre-wired (standard length: 2 m)

Weight (packed state) Approx. 160 g

Material

Case ABS (Acrylonitrile Butadiene Styrene)

Lens/Display

window Methacrylic resin

Adjuster POM

Cable PVC

Bending radius of cable R18

Accessories Instruction manual

E3JK

Engineering Data (Reference Value)

Parallel Operating Range

Through-beam

E3JK-T@11/T@13 E3JK-T@12/T@14

Retro-reflective

E3JK-R@@1+E39-R1/

E3JK-R@@3+E39-R1

E3JK-R@@1+E39-R1S/

E3JK-R@@3+E39-R1S

E3JK-R@@1+E39-R2/

E3JK-R@@3+E39-R2

E3JK-R@@2+E39-R1 E3JK-R@@2+E39-R1S E3JK-R@@2+E39-R2

Operating Range

Diffuse-reflective

E3JK-D@@1/D@@3 E3JK-D@@2/D@@4

Sensing distance (m)

Parallel distance (m)

2.5

2.0

1.5

1.0

0.5

−0.5

−1.0

−1.5

−2.0

−2.5

200406080 100

E3JK-T11

E3JK-T13

Parallel distance (m)

Sensing distance (m)

0.5

0.4

0.3

0.2

0.1

−0.1

−0.2

−0.3

−0.4

−0.5

2046810

E3JK-T12

E3JK-T14

Parallel distance (mm)

Sensing distance (m)

150

100

−100

−150

046821210

E3JK-R1

E3JK-R3

Reflector: E39-R1

Sensing distance (m)

Parallel distance (mm)

200

150

100

−50

−100

−150

−200

501015

E3JK-R1

E3JK-R3

Reflector: E39-R1S

Sensing distance (m)

Parallel distance (mm)

250

200

150

100

−50

−100

−150

−200

−250

50101520

E3JK-R1

E3JK-R3

Reflector: E39-R2

150

100

−50

−100

−150

2046810

Reflector: E39-R1

Sensing distance (m)

Parallel distance (mm)

200

150

100

−50

−100

−150

−200

501015

Reflector: E39-R1S

Sensing distance (m)

Parallel distance (mm)

250

200

150

100

−50

−100

−150

−200

−250

01052015

Reflector: E39-R2

Sensing distance (m)

Parallel distance (mm)

Distance Y (mm)

−10

−20

−30

−40

−50 24086

E3JK-D1

E3JK-D3

Sensing object:

White paper

(300 × 300 mm)

Distance X (m)

Distance Y (mm)

Distance X (mm)

−10

−20

−30

0 200 400 600 800 1000

E3JK-D2

E3JK-D4

Sensing object: White paper (100 × 100 mm)

E3JK

Excess Gain Ratio vs. Set Distance

Through-beam

E3JK-T@11/T@13 E3JK-T@12/T@14

Retro-reflective

E3JK-R@@1+E39-R1/

E3JK-R@@3+E39-R1

E3JK-R@@1+E39-R1S/

E3JK-R@@3+E39-R1S

E3JK-R@@1+E39-R2/

E3JK-R@@3+E39-R2

E3JK-R@@2+E39-R1 E3JK-R@@2+E39-R1S E3JK-R@@2+E39-R2

Diffuse-reflective

E3JK-D@@1/D@@3E3JK-D@@2/D@@4

Distance (m)

Excess gain ratio

Operating

level

E3JK-T11

E3JK-T13

100

0.1

200406080100

Distance (m)

Excess gain ratio

Operating

level

100

0.1

50101520

E3JK-T12

E3JK-T14

Distance (m)

Excess gain ratio

Operating

level

100

0.1

2046810 12

E3JK-R1

E3JK-R3

Reflector: E39-R1

Distance (m)

Excess gain ratio

Operating

level

100

0.1

420 810612141816 20

E3JK-R1

E3JK-R3

Reflector: E39-R1S

Distance (m)

Excess gain ratio

Operating

level

E3JK-R1

E3JK-R3

100

0.1

420 810612141816 20

Reflector: E39-R2

100

0.1

2046810

Reflector: E39-R1

Distance (m)

Excess gain ratio

Operating

level

100

0.1

420 810612141816 20

Reflector: E39-R1S

Distance (m)

Excess gain ratio

Operating

level

100

0.1

420 810612141816 20

Reflector: E39-R2

Distance (m)

Excess gain ratio

Operating

level

Distance (m)

Excess gain ratio

Operating

level

100

12406

E3JK-D1

E3JK-D3

Sensing object: White paper (300 × 300 mm)

Distance (mm)

Excess gain ratio

Operating

level

100

0.1

1000 200 300 400 500

E3JK-D2

E3JK-D4

Sensing object: White paper (100 × 100 mm)

E3JK

I/O Circuit Diagrams

Relay Output Models

DC SSR Output Models

Note: Connect the brown cable to any polarity and the blue cable to the power supply because there is no polarity on the Emitter side.

*For the Through-beam Sensor, the Emitter is listed as E3JK-T@11-L, E3JK-T@12-L and the Receiver is listed as E3JK-T@11-D, E3JK-T@12-D in the table.

Confirm the models to order in “Ordering Information.”

Model Timing chart Output circuit

Light-ON Dark-ON

E3JK-TR11-L *

E3JK-TR12-L *

E3JK-TR13-L *

E3JK-TR14-L *

E3JK-TR11-D *

E3JK-TR12-D *

E3JK-TR13-D *

E3JK-TR14-D *

E3JK-RR11

E3JK-RR12

E3JK-RR13

E3JK-DR11

E3JK-DR12

E3JK-DR13

E3JK-DR14

Model Timing chart Output circuit

Light-ON Dark-ON

E3JK-TN11-L *

E3JK-TP11-L *

E3JK-TN12-L *

E3JK-TP12-L *

E3JK-TN13-L *

E3JK-TP13-L *

E3JK-TN14-L *

E3JK-TP14-L *

E3JK-TN11-D *

E3JK-TN12-D *

E3JK-TN13-D *

E3JK-TN14-D *

E3JK-RN11

E3JK-RN12

E3JK-RN13

E3JK-DN11

E3JK-DN12

E3JK-DN13

E3JK-DN14

E3JK-TP11-D *

E3JK-TP12-D *

E3JK-TP13-D *

E3JK-TP14-D *

E3JK-RP11

E3JK-RP12

E3JK-RP13

E3JK-DP11

E3JK-DP12

E3JK-DP13

E3JK-DP14

Photoelectric

Sensor

main

Circuit

Power

Source

24 to 240 VAC

24 to 240 VDC

Brown

Blue

Power

Indicator

(green)

Operation Indicator

(orange)

Relay

Output Tc-Tb

Output Tc-Ta

Incident light

No incident light

OFF

Operate

Reset

Conducting

Not conducting

Conducting

Not conducting

Operation Indicator

(orange)

Relay

Output Tc-Tb

Output Tc-Ta

Incident light

No incident light

OFF

Operate

Reset

Conducting

Not conducting

Conducting

Not conducting

Photoelectric

Sensor

main

Circuit

Stability

Indicator

(green)

Operation Indicator

(orange)

Power

Source

24 to 240 VAC

24 to 240 VDC

Brown

Blue

White

Black

Gray

Contact output (SPDT),

250 VAC, 3 A max.,

5 VDC, 10 mA min.

Photoelectric

Sensor

main

Circuit

10 to 30 VDC

0 V

Brown

Blue

Power

Indicator

(green)

Operation Indicator

(orange)

Output

transistor

Load

(e.g., relay)

Incident light

No incident light

OFF

Operate

Reset

Operation Indicator

(orange)

Output

transistor

Load

(e.g., relay)

Incident light

No incident light

OFF

Operate

Reset

Photoelectric

Sensor

main

Circuit

10 to 30 VDC

0 V

Brown

Black

Blue

100 mA max.

Load

Stability

Indicator

(green)

Operation Indicator

(orange)

Operation Indicator

(orange)

Output

transistor

Load

(e.g., relay)

Incident light

No incident light

OFF

Operate

Reset

Operation Indicator

(orange)

Output

transistor

Load

(e.g., relay)

Incident light

No incident light

OFF

Operate

Reset

Photoelectric

Sensor

main

Circuit

10 to 30 VDC

0 V

Brown

Black

Blue

100 mA max.

Load

Stability

Indicator

(green)

Operation Indicator

(orange)

E3JK

Safety Precautions

Refer to Warranty and Limitations of Liability.

This product is not designed or rated for

ensuring safety of persons either directly or

indirectly.

Do not use it for such purposes.

Do not wire the product incorrectly.

Do not use this product with a damaged case or

cable.

Do not disassemble, repair, or modify this

product.

Doing so may lead to explosion, fire, or product

failure.

The following precautions must be observed to ensure safe

operation of the Sensor.

1. Do not use the Sensor in environments subject to

flammable, explosive or corrosive gases.

2. Do not use this product in an environment in which oil or

chemicals are present.

3. Do not use this product under water, in the rain, or outdoors.

4. Do not use this product under conditions that exceed or in

an environment that exceeds the ratings.

5. When using an AC power supply, do not use a power

supply that includes high frequencies (such as an inverter).

6. Do not use this product in a location subject to direct

sunlight.

7. Do not use this product in a location in which the product will

be subject to direct vibrations or impacts.

8. Do not use thinner, alcohol, or other organic solvents with

this product.

9. When disposing of the Sensor, treat it as industrial waste.

•If the product is wired to high-voltage power lines and power

lines in the same pipe or the same duct, the product may

malfunction or be damaged due to induction. Therefore, in

principle, perform these two types of wiring separately or

use shielded cords.

•Do not apply excessive force to the cables.

•When using a commercially available switching regulator,

be sure to install an FG (frame ground terminal).

•The time between the product being turned ON and sensing

being possible is 100 ms, so wait at least 100 ms after

turning the product ON before using it. If the load and the

product are connected to different power supplies, be sure

to turn the product ON first.

•An output pulse may be generated when the product is

turned OFF, so we recommend turning the load or the load

line OFF first.

WARNING

Caution

Precautions for Safe Use

Precautions for Correct Use

E3JK

Dimensions

Sensors

(Unit: mm)

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Through-beam

E3JK-T@1@

Power Indicator (green)

1.3

12.8

Optical axis

20.2

4.8

14.7 Two, 4.5-dia. M4

mounting holes

Recommended

Torque: 0.8 N⋅m

(1.2 N⋅m max.)

6-dia. vinyl-insulated round cable

(Conductor cross section: 0.3 mm2, Insulator

diameter: 1.5 mm), Standard length: 2 m,

Bending radius: R18

E3JK-T@1@-L

Operation selector

Sensitivity adjuster

Stability Indicator (green)

Operation Indicator (orange)

5040

20.2

12.8

14.7

Optical axis

4.8

Two, 4.5-dia. M4

mounting holes

Recommended

Torque: 0.8 N⋅m

(1.2 N⋅m max.)

6-dia. vinyl-insulated round cable

(Conductor cross section: 0.3 mm2, Insulator

diameter: 1.5 mm), Standard length: 2 m,

Bending radius: R18

E3JK-T@1@-D

Retro-reflective/

Diffuse-reflective

E3JK-R@1@

E3JK-D@1@

Operation selector

Sensitivity adjuster

Operation Indicator (orange) Stability Indicator (green)

Two, 4.5-dia. M4

mounting holes

Recommended

Torque: 0.8 N⋅m

(1.2 N⋅m max.)

6-dia. vinyl-insulated round cable

(Conductor cross section: 0.3 mm2, Insulator

diameter: 1.5 mm), Standard length: 2 m,

Bending radius: R18

5040

Emitter

Optical axis

Receiver

27.2

12.8

14.7

E3JK

Accessories

Mounting Bracket (Order separately)

Reflector (Order separately)

12 22

42±0.1

40±0.1

24 4.4

10°

45°

Two, Radius: 5.6

31.2

Radius: 2.2

60°

21.9

Two, Radius: 5 Two, Radius: 5

Two, 4.4-dia. hole

Two, Radius: 5

18±0.1

6-dia. hole

6.4

10±0.1

Radius: 3.2 Radius: 3.2

6.4

Two, Radius: 5

Radius: 56.6±0.1

Material: Iron

Mounting Bracket

E39-L40

6-dia.

hole

30.2

37.2

40 6.4

Two, M6 holes

Optical axis

Mounting Holes

Retro-reflective/

Diffuse-reflective

Through-beam

39.5

6.6

5.6

6.4

Mounting Bracket Mounting Bracket

Optical axis

With Mounting Bracket Attached

E39-R1

E39-R1S

40.3

5259.9

2.7

1.6

7.5

Two, 3.5-dia. holes

Material:

Reflective surface: acrylic

Rear surface: ABS

E39-R2

Material:

Reflective surface: acrylic

Rear surface: ABS

74.5

80.8

5259.9

2.7

1.6 7

6.5 34

7.5

Four, 3.5-dia. holes

MEMO

Terms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have

any questions or comments.

Warranties.

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of twelve months from the date of sale by Omron (or such other period expressed in writing

by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE

PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL

SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products

or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,

to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the

non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price

of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other

claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,

installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or

unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system

assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in

writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is

not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,

or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with

respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it

to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice

to change part numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be

assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to

confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

!UTHORIZED$ISTRIBUTOR

)NTHEINTERESTOFPRODUCTIMPROVEMENT

SPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE

#AT.O%%

0RINTEDIN*APAN



Ú/-2/.#ORPORATION!LL2IGHTS2ESERVED

/-2/.#ORPORATION)NDUSTRIAL!UTOMATION#OMPANY

/-2/.%,%#42/.)#3,,#

'REENSPOINT0ARKWAY3UITE

(OFFMAN%STATES),53!

4EL&AX

2EGIONAL(EADQUARTERS

/-2/.%52/0%"6

3ENSOR"USINESS5NIT

#ARL"ENZ3TR$.UFRINGEN'ERMANY

4EL&AX

#ONTACTWWWIAOMRONCOM

4OKYO*!0!.

/-2/.!3)!0!#)&)#04%,4$

.O!!LEXANDRA2OAD,OBBY

!LEXANDRA4ECHNOPARK

3INGAPORE

4EL&AX

/-2/.#().!#/,4$

2OOM"ANKOF#HINA4OWER

9IN#HENG:HONG2OAD

0U$ONG.EW!REA3HANGHAI#HINA

4EL&AX

CSM_8_2_1015