http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for Micro Chip Transformer used for General Electronics equipment for your design.
2009.9.10
Inductors(coils)/Microchip Transformer > Balun > Film Type
0.45±0.1
(in mm)
1.6±0.1
0.8±0.1
0.15±0.1
(6)
(1)
(5)
(2)
(4)
(3)
(Top View)
(Bottom View)
Polarity
Marking
0.3±0.1
0.4±0.10.2±0.1
(1)
(2)
(3)(5)
(4)(6)
: Unbalance port
: NC
: GND
: Balance port
: Electrode
(6) (4)(5)
(1) (3)(2)
Balun Film Type
DXP18B Series (0603 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
L180mm Embossed Tape 5000
BBulk(Bag) 500
■ Rated Value (p: packaging code)
Part Number Frequency Range Port Impedance Insertion Loss
at Freq. Range (max.) CMRR
at Freq. Range (min.) Rated Power Operating Temperature Range
DXP18BN5014Hp
470MHz to 790MHz 50 ohm 200 1.2dB 25dB 20dBm -40 to +85°C
DXP18BN5014Tp
50MHz to 870MHz 50 ohm 200 1.5dB 25dB 20dBm -40 to +85°C
DXP18BN5016Dp
470MHz to 870MHz 50 ohm 300 1.2dB 25dB 20dBm -40 to +85°C
DXP18BN7514Tp
50MHz to 870MHz 75 ohm 300 1.5dB 25dB 20dBm -40 to +85°C
Insertion Loss (dB)
0
1
2
3100 1000
Frequency (MHz)
20
25
30
35
40
45
100 1000
Frequency (MHz)
CMRR (dB)
Only for reflow soldering.
■ Insertion Loss Characteristics
DXP18BN5014H
■ CMRR Characteristics
DXP18BN5014H
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for Micro Chip Transformer used for General Electronics equipment for your design.
2009.9.10
0
1
2
3
Insertion Loss (dB)
Frequency (MHz) 100010050 2000 Frequency (MHz)
50 100 1000 2000
45
40
35
30
25
20
CMRR (dB)
Frequency (MHz)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2450 500 550 600 650 700 750 800 850
Insertion Loss (dB)
20
25
30
35
40
45
450 500 600 650550 700 750 800 850
Frequency (MHz)
CMRR (dB)
Frequency (MHz) 100010050 2000
0
1
2
3
Insertion Loss (dB)
45
40
25
20
30
35
CMRR (dB)
100010050 2000
Frequency (MHz)
Inductors(coils)/Microchip Transformer > Balun > Film Type
■ Insertion Loss Characteristics
DXP18BN5014T
■ CMRR Characteristics
DXP18BN5014T
■ Insertion Loss Characteristics
DXP18BN5016D
■ CMRR Characteristics
DXP18BN5016D
■ Insertion Loss Characteristics
DXP18BN7514T
■ CMRR Characteristics
DXP18BN7514T
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for Micro Chip Transformer used for General Electronics equipment for your design.
2009.9.10
Inductors(coils)/Microchip Transformer > Balun > Film Type
!Caution (Rating)
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
