C3D20065D VRRM Silicon Carbide Schottky Diode Qc Features = 50 nC** Package 650-Volt Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-247-3 Benefits * * * * * 650 V IF (TC=135C) = 28 A** Z-Rec(R) Rectifier * * * * * * * = Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway Applications * * * * Switch Mode Power Supplies Solar Inverters Power Factor Correction - Typical PFC Pout : 2000W-4000W Motor Drives - Typical Power : 5HP-10HP Part Number Package Marking C3D20065D TO-247-3 C3D20065 Maximum Ratings (TC = 25 C unless otherwise specified) Symbol Parameter Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 650 V VRSM Surge Peak Reverse Voltage 650 V VDC DC Blocking Voltage 650 V 29.5/59 14/28 10/20 A TC=25C TC=135C TC=152C IF Continuous Forward Current (Per Leg/Device) IFRM Repetitive Peak Forward Surge Current (Per Leg/Device) 67/134 44/88 A TC=25C, tP=10 ms, Half Sine Wave, D=0.3 TC=110C, tP=10 ms, Half Sine Wave, D=0.3 IFSM Non-Repetitive Peak Forward Surge Current (Per Leg/Device) 90/157 71/115 A TC=25C, tP=10ms, Half Sine Wave, D=0.3 TC=110C, tP=10 ms, Half Sine Wave, D=0.3 IFSM Non-Repetitive Peak Forward Surge Current (Per Leg/Device) 250/500 A TC=25C, tP=10 s, Pulse Ptot Power Dissipation (Per Leg) 136.3 59 W TC=25C TC=125C Operating Junction and Storage Temperature -55 to +175 C 1 8.8 Nm lbf-in TJ , Tstg TO-247 Mounting Torque * 1 Value Per Leg, ** Per Device C3D20065D Rev. - M3 Screw 6-32 Screw Note Electrical Characteristics (Per Leg) Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.5 2.0 1.8 2.4 V IR Reverse Current 12 24 60 220 A VR = 650 V TJ=25C VR = 650 V TJ=175C QC Total Capacitive Charge 25 nC VR = 650 V, IF = 10 A di/dt = 500 A/s TJ = 25C C Total Capacitance 480 50 42 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note IF = 10 A TJ=25C IF = 10 A TJ=175C Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RJC ** Parameter Typ. Unit Thermal Resistance from Junction to Case 1.1** 0.55* C/W Per Leg, * Both Legs Typical Performance (Per Leg) 100 20 IF Forward Current (A) 16 14 TJ = TJ = TJ = TJ = 25C 75C 125C 175C 12 10 8 6 80 70 60 50 40 30 4 20 2 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 VF Forward Voltage (V) Figure 1. Forward Characteristics 2 90 IR Reverse Voltage (A) 18 C3D20065D Rev. - TJ = 25C TJ = 75C TJ = 125C TJ = 175C 0 0 100 200 300 400 500 600 700 800 900 VR Reverse Voltage (V) Figure 2. Reverse Characteristics Typical Performance (Per Leg) 70 400 60 350 50 Duty* Duty* Duty* Duty* 300 C Capacitance (pF) 20% 30% 50% 70% DC IF (A) 40 30 20 200 150 100 10 0 250 50 25 50 75 100 125 150 175 0 1 10 100 1000 TC C Figure 3. Current Derating VR Reverse Voltage (V) Figure 4. Capacitance vs. Reverse Voltage 1.0E+01 1E1 1.0E+00 Zth (C/W) 1E0 1.0E-01 1E-1 1.0E-02 1.0E-03 1E-2 1.E-07 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 1.E-01 1.E+00 1E-5 1E-4 1E-3 1E-2 1E-1 1E0 1E1 Tim e (s) Figure 5. Transient Thermal Impedance 3 C3D20065D Rev. - Typical Performance (Per Leg) 140 140.000 Power Dissipation (W) 120.000 120 100 100.000 80 80.000 60 60.000 40 40.000 20 20.000 0 0.000 25 50 75 100 125 150 175 25 50 75 100 125 150 175 TC Case Temperature (C) Figure 6. Power Derating Diode Model (Per Leg) Diode Model CSD10060 Vf Vf T T==VTV+T+If*R If*RT T V -3 -3) 0.98+(T * -1.6*10 VTT==0.92 + (Tj * J-1.35*10 ) -3 -3 R 0.04+(T 0.522*10 ) RT =0.052 + (T *J*0.29*10 ) T= j Note: Tj = Diode Junction Temperature In Degrees Celsius, valid from 25C to 175C VT 4 C3D20065D Rev. - RT Package Dimensions POS Package TO-247-3 X Z W Inches Min Y AA CC Min Max 16.130 A .605 .635 15.367 B .800 .831 20.320 21.10 C .780 .800 19.810 20.320 D .095 .133 2.413 3.380 E .046 .052 1.168 1.321 F .060 .095 1.524 2.410 G BB Millimeters Max .215 TYP 5.460 TYP H .175 .205 4.450 5.210 J .075 .085 1.910 2.160 K 6 21 6 21 L 4 6 4 6 M 2 4 2 4 N 2 4 2 4 P .090 .100 2.286 2.540 Q .020 .030 .508 .762 R 9 11 9 11 S 9 11 9 11 T 2 8 2 8 U 2 8 2 8 V .137 .144 3.487 3.658 W .210 .248 5.334 6.300 X .502 .557 12.751 14.150 Y .637 .695 16.180 17.653 Z .038 .052 0.964 1.321 AA .110 .140 2.794 3.556 BB .030 .046 0.766 1.168 CC .161 .176 4.100 4.472 Recommended Solder Pad Layout Part Number Package Marking C3D20065D TO-247-3 C3D20065 TO-247-3 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering 5 C3D20065D Rev. - Notes * RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. * REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. * This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Copyright (c) 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C3D20065D Rev. - Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power