3.2x1.6mm SMD CHIP LED LAMP Part Number: AP3216SYCK/SB Super Bright Yellow Features Description z 3.2mmx1.6mm SMT LED, 1.1mm thickness. The Super Bright Yellow device is made with AlGaInP (on z Low power consumption. GaAs substrate) light emitting diode chip. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM0575 REV NO: V.1 DATE: AUG/26/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000429 Selection Guide Part No. Dice AP3216SYCK/SB Iv (mcd) [2] @ 20mA Lens Type Super Bright Yellow (AlGaInP) Water Clear Viewing Angle [1] Min. Max. 21/2 80 240 120 Units Test Conditions Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Super Bright Yellow 590 nm IF=20mA D [1] Dominant Wavelength Super Bright Yellow 590 nm IF=20mA 1/2 Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Min. 1.6 Typ. 2 Max. Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAM0575 REV NO: V.1 DATE: AUG/26/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000429 Super Bright Yellow AP3216SYCK/SB SPEC NO: DSAM0575 REV NO: V.1 DATE: AUG/26/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000429 AP3216SYCK/SB Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAM0575 REV NO: V.1 DATE: AUG/26/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000429 PACKING & LABEL SPECIFICATIONS AP3216SYCK/SB SPEC NO: DSAM0575 REV NO: V.1 DATE: AUG/26/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203000429