Tantalum & Aluminum Surface Mount Capacitors
Low ESR
tantalum low esr
Electronic Components
One world. One KEMET.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 2
One world. One KEMET
Tantalum & Aluminum Surface Mount Capacitors
Low ESR
Table of Contents Page
Why Choose KEMET ........................................................................................................................................................ 3
MnO2
T494 Industrial Grade Low ESR MnO2 Series ...............................................................................................................................5
T495 Surge Robust Low ESR MnO2 Series ................................................................................................................................20
T510 Multiple Anode Low ESR MnO2 Series ...............................................................................................................................39
Tantalum Stack MnO2 (TSM) Series ...........................................................................................................................................48
Polymer
T520 Series Polymer Tantalum ...................................................................................................................................................58
T521 High Voltage Polymer Tantalum .........................................................................................................................................75
T522 Reduced Leakage Polymer Tantalum ................................................................................................................................84
T525 125ºC Rated Polymer Tantalum .........................................................................................................................................93
T527 Facedown Terminal Polymer Tantalum ............................................................................................................................102
T528 Low ESL/Facedown Terminal Polymer Tantalum ............................................................................................................. 110
T529 Small Case Size Substrate Terminal Polymer Tantalum .................................................................................................. 119
T530 High Capacitance/125ºC Rated Polymer Tantalum ..........................................................................................................127
T543 Series Polymer Tantalum COTS ......................................................................................................................................137
T545 Series High Energy Polymer Tantalum ............................................................................................................................156
Tantalum Stack Polymer (TSP) Series ......................................................................................................................................166
KEMET Organic Capacitor (AO-CAP)
A700 Series Polymer Aluminum ................................................................................................................................................176
Packaging Information ................................................................................................................................................. 187
Packaging Information for T520 and T522 ................................................................................................................. 192
KEMET Corporation Sales Ofces ............................................................................................................................. 197
Other KEMET Resources ............................................................................................................................................. 198
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 33
One world. One KEMET
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
One World. One KEMET
One world. One source. One KEMET.
When you partner with KEMET, our entire global organization provides you with the
coordinated service you need. No bouncing from supplier to supplier. No endless phone
calls and web browsing. We’re your single, integrated source for electronic component
solutions worldwide.
Less hassles. More solutions.
Our commitment to product quality and on-time delivery has helped customers
succeed for over 90 years. There’s a reason KEMET components can be found in
defense and aerospace equipment. Our reputation is built on a history of consistency,
reliability and service.
The “Easy-to-Buy-From” company.
KEMET offers a level of responsiveness that far surpasses any other supplier. Our
passion for customer service is evident throughout our global sales organization, which
offers localized support bolstered by our worldwide logistics capabilities. Whether you
need rush samples, technical assistance, in-person consultation, accelerated custom
design, design collaboration or prototype services, we have a solution.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 44
One world. One KEMET
Made for you.
When you need custom products delivered on a tight schedule, you can trust KEMET.
Get direct design consultation from global experts, who help you get the job done on
time and within budget.
Working for a better world.
KEMET is dedicated to economically, environmentally and socially sustainable
development. We’ve adopted the Electronic Industry Code of Conduct (EICC) to
address all aspects of corporate responsibility. Our manufacturing facilities have won
numerous environmental excellence awards and recognitions, and our supply chain is
certified. We believe doing the right thing is in everyone’s interest.
About KEMET.
KEMET Corporation is a leading global supplier of electronic components. We offer
our customers the broadest selection of capacitor technologies in the industry across
multiple dielectrics, along with an expanding range of electromechanical devices, and
electromagnetic compatibility solutions. Our vision is to be the preferred supplier of
electronic component solutions for customers demanding the highest standards of
quality, delivery and service.
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com
One World. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 5
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 1
One world. One KEMET
Bene ts
Meets or exceeds EIA Standard 535BAAC
Taped and reeled per EIA 481–1
Symmetrical, compliant terminations
Optional gold-plated terminations
Laser-marked case
100% surge current test on C, D, E, U, V, X sizes
Halogen-free epoxy
Capacitance values of 0.1 μF to 1,000 μF
Tolerances of ±10% and ±20%
Voltage rating of 2.5 – 50 VDC
Extended range values
Low profi le case sizes
RoHS Compliant and lead-free terminations
Operating temperature range of -55˚C to +125˚C
Applications
Typical applications include decoupling and fi ltering in industrial
and automotive end applications, such as DC/DC converters,
portable electronics, telecommunications, and control units.
Overview
The KEMET T494 Series is a lower ESR version of the popular
T491 Series, designed specifi cally for today’s highly automated
surface mount processes and equipment. The T494 combines
KEMET’s proven solid tantalum technology, acclaimed and
respected throughout the world, with the latest in materials,
processes and automation, resulting in unsurpassed total
performance and value. This product meets or exceeds the
requirements of EIA Standard 535BAAC. The T494 standard
terminations are available in 100% matte tin and provide
excellent wetting characteristics and compatibility with today's
surface mount solder systems. Tin/lead (Sn/Pb) terminations
are available upon request for any part number. Gold-plated
terminations are also available for use with conductive epoxy
attachment processes.
Standard packaging of these devices is tape and reel in
accordance with EIA 481–1. This system provides perfect
compatibility with all tape-fed placement units.
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 6
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 22
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T494 T336 M004 A T
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 0.1 – 1,000 µF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 2.5 – 50 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 7
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 33
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
Quali cation
Test Condition Characteristics
Endurance 85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C @ 0 volts, 2,000 hours
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MILSTD–202, Method 107, Condition B, mounted, -55°C to
125°C, 1,000 cycles
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +125ºC, +25ºC.
+2C -55°C +85°C +125°C
Δ C/C IL* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage).
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 8
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 44
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
Electrical Characteristics
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (μF)
Frequency (Hz)
T494C476M006AT
T494D337M010AT
T494B106M020AT
Capacitance vs. Frequency
0.01
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (HZ)
T494C476M006AT_IMP
T494D337M010AT_IMP
T494B106M020AT_IMP
T494C476M006AT_ESR
T494D337M010AT_ESR
T494B106M020AT_ESR
ESR vs. Frequency
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Component
KEMET EIA L* W* H*
F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006
X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216–18
3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.6 ±0.2
(0.063 ±0.008) 1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ±0.10
(0.004 ±0.004)
0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
B352821
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.9 ±0.2
(0.075 ±0.008) 2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ±0.10
(0.004 ±0.004)
0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
C6032–28
6.0 ±0.3
(0.236 ±0.03)
3.2 ±0.3
(0.126 ±0.012)
2.5 ±0.3
(0.098 ±0.012) 2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ±0.10
(0.004 ±0.004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
D734331
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ±0.10
(0.004 ±0.004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ±0.10
(0.004 ±0.004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
E7360-38
7.3 ±0.3
(0.287 ±0.012)
6.0± 0.3
(0.236 ±0.012)
3.6 ± 0.2
(0.142 ±0.008) 4.1 (.161) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
S3216–12
3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ±0.008) 1.2 (.047) 1.2 (.047) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 0.8 (.031) 1.1 (.043) 1.3 (.051)
T3528–12
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008) 1.2 (.047) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
U6032–15
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.2
(0.110 ±0.008) 1.5 (.059) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
V7343–20
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.0 (.079) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 9
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 55
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
T494 T336 M004 A T
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
2.5 100 T/3528-12 T494T107(1)2R5A(2) 2.5 24.0 3.5 141 127 56 1
2.5 220 D/7343-31 T494D227(1)2R5A(2) 5.5 8.0 0.2 866 779 346 1
333 A/3216-18 T494A336(1)003A(2) 1.0 6.0 2.0 194 175 78 1
43.3 A/3216-18 T494A335(1)004A(2) 0.5 6.0 4.0 137 123 55 1
44.7 A/3216-18 T494A475(1)004A(2) 0.5 6.0 3.5 146 131 58 1
46.8 A/3216-18 T494A685(1)004A(2) 0.5 6.0 3.0 158 142 63 1
46.8 S/3216-12 T494S685(1)004A(2) 0.5 6.0 7.0 93 84 37 1
410 B/3528-21 T494B106(1)004A(2) 0.5 6.0 1.2 266 239 106 1
410 A/3216-18 T494A106(1)004A(2) 0.5 6.0 2.0 194 175 78 1
410 S/3216-12 T494S106(1)004A(2) 0.5 6.0 9.0 82 74 33 1
415 B/3528-21 T494B156(1)004A(2) 0.6 6.0 1.2 266 239 106 1
415 A/3216-18 T494A156(1)004A(2) 0.6 6.0 1.5 224 202 90 1
415 T/3528-12 T494T156(1)004A(2) 0.6 6.0 2.0 187 168 75 1
415 S/3216-12 T494S156(M)004A(2) 0.6 10.0 9.0 82 74 33 1
422 C/6032-28 T494C226(1)004A(2) 0.9 6.0 0.5 469 422 188 1
422 B/3528-21 T494B226(1)004A(2) 0.9 6.0 0.6 376 338 150 1
422 A/3216-18 T494A226(1)004A(2) 0.9 6.0 1.5 224 202 90 1
422 S/3216-12 T494S226(M)004A(2) 0.9 10.0 8.0 87 78 35 1
422 T/3528-12 T494T226(1)004A(2) 0.9 6.0 2.5 167 150 67 1
433 C/6032-28 T494C336(1)004A(2) 1.3 6.0 0.5 469 422 188 1
433 U/6032-15 T494U336(1)004A(2) 1.3 6.0 0.6 387 348 155 1
433 B/3528-21 T494B336(1)004A(2) 1.3 6.0 0.5 412 371 165 1
433 A/3216-18 T494A336(1)004A(2) 1.3 6.0 3.0 158 142 63 1
433 T/3528-12 T494T336(M)004A(2) 1.3 8.0 3.5 141 127 56 1
447 C/6032-28 T494C476(1)004A(2) 1.9 6.0 0.5 469 422 188 1
447 U/6032-15 T494U476(1)004A(2) 1.9 6.0 0.6 387 348 155 1
447 B/3528-21 T494B476(1)004A(2) 1.9 6.0 0.5 412 371 165 1
447 A/3216-18 T494A476(M)004A(2) 1.9 12.0 2.0 194 175 78 1
447 T/3528-12 T494T476(M)004A(2) 1.9 12.0 4.0 132 119 53 1
468 D/7343-31 T494D686(1)004A(2) 2.7 6.0 0.20 866 779 346 1
468 C/6032-28 T494C686(1)004A(2) 2.7 6.0 0.25 663 597 265 1
468 U/6032-15 T494U686(1)004A(2) 2.7 6.0 0.60 387 348 155 1
468 B/3528-21 T494B686(1)004A(2) 2.7 6.0 2.00 206 185 82 1
468 A/3216-18 T494A686(1)004A(2) 2.7 30.0 3.00 158 142 63 1
4100 D/7343-31 T494D107(1)004A(2) 4.0 8.0 0.20 866 779 346 1
4100 C/6032-28 T494C107(1)004A(2) 4.0 8.0 0.20 742 668 297 1
4100 U/6032-15 T494U107(1)004A(2) 4.0 10.0 1.00 300 270 120 1
4100 B/3528-21 T494B107(M)004A(2) 4.0 8.0 0.65 362 326 145 1
4100 A/3216-18 T494A107(M)004A(2) 4.0 30.0 3.00 158 142 63 1
4100 T/3528-12 T494T107(M)004A(2) 4.0 30.0 4.50 125 113 50 1
4150 D/7343-31 T494D157(1)004A(2) 6.0 8.0 0.15 1000 900 400 1
4150 V/7343-20 T494V157(1)004A(2) 6.0 8.0 0.20 791 712 316 1
4150 C/6032-28 T494C157(1)004A(2) 6.0 8.0 0.30 606 545 242 1
4150 B/3528-21 T494B157(M)004A(2) 6.0 12.0 1.00 292 263 117 1
4220 V/7343-20 T494V227(1)004A(2) 8.8 8.0 0.30 645 581 258 1
4220 B/3528-21 T494B227(M)004A(2) 8.8 8.0 0.40 461 415 184 1
4330 D/7343-31 T494D337(1)004A(2) 13.2 8.0 0.15 1000 900 400 1
4330 C/6032-28 T494C337(1)004A(2) 13.2 10.0 0.09 1106 995 442 1
4330 V/7343-20 T494V337(1)004A(2) 13.2 12.0 0.30 645 581 258 1
4470 X/7343-43 T494X477(1)004A(2) 18.8 8.0 0.15 1049 944 420 1
4470 D/7343-31 T494D477(1)004A(2) 18.8 8.0 0.15 1000 900 400 1
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
2.5 100 T/3528-12 T494T107(1)2R5A(2) 2.5 24.0 3.5 141 127 56 1
2.5 220 D/7343-31 T494D227(1)2R5A(2) 5.5 8.0 0.2 866 779 346 1
333 A/3216-18 T494A336(1)003A(2) 1.0 6.0 2.0 194 175 78 1
43.3 A/3216-18 T494A335(1)004A(2) 0.5 6.0 4.0 137 123 55 1
44.7 A/3216-18 T494A475(1)004A(2) 0.5 6.0 3.5 146 131 58 1
46.8 A/3216-18 T494A685(1)004A(2) 0.5 6.0 3.0 158 142 63 1
46.8 S/3216-12 T494S685(1)004A(2) 0.5 6.0 7.0 93 84 37 1
410 B/3528-21 T494B106(1)004A(2) 0.5 6.0 1.2 266 239 106 1
410 A/3216-18 T494A106(1)004A(2) 0.5 6.0 2.0 194 175 78 1
410 S/3216-12 T494S106(1)004A(2) 0.5 6.0 9.0 82 74 33 1
415 B/3528-21 T494B156(1)004A(2) 0.6 6.0 1.2 266 239 106 1
415 A/3216-18 T494A156(1)004A(2) 0.6 6.0 1.5 224 202 90 1
415 T/3528-12 T494T156(1)004A(2) 0.6 6.0 2.0 187 168 75 1
415 S/3216-12 T494S156(M)004A(2) 0.6 10.0 9.0 82 74 33 1
422 C/6032-28 T494C226(1)004A(2) 0.9 6.0 0.5 469 422 188 1
422 B/3528-21 T494B226(1)004A(2) 0.9 6.0 0.6 376 338 150 1
422 A/3216-18 T494A226(1)004A(2) 0.9 6.0 1.5 224 202 90 1
422 S/3216-12 T494S226(M)004A(2) 0.9 10.0 8.0 87 78 35 1
422 T/3528-12 T494T226(1)004A(2) 0.9 6.0 2.5 167 150 67 1
433 C/6032-28 T494C336(1)004A(2) 1.3 6.0 0.5 469 422 188 1
433 U/6032-15 T494U336(1)004A(2) 1.3 6.0 0.6 387 348 155 1
433 B/3528-21 T494B336(1)004A(2) 1.3 6.0 0.5 412 371 165 1
433 A/3216-18 T494A336(1)004A(2) 1.3 6.0 3.0 158 142 63 1
433 T/3528-12 T494T336(M)004A(2) 1.3 8.0 3.5 141 127 56 1
447 C/6032-28 T494C476(1)004A(2) 1.9 6.0 0.5 469 422 188 1
447 U/6032-15 T494U476(1)004A(2) 1.9 6.0 0.6 387 348 155 1
447 B/3528-21 T494B476(1)004A(2) 1.9 6.0 0.5 412 371 165 1
447 A/3216-18 T494A476(M)004A(2) 1.9 12.0 2.0 194 175 78 1
447 T/3528-12 T494T476(M)004A(2) 1.9 12.0 4.0 132 119 53 1
468 D/7343-31 T494D686(1)004A(2) 2.7 6.0 0.20 866 779 346 1
468 C/6032-28 T494C686(1)004A(2) 2.7 6.0 0.25 663 597 265 1
468 U/6032-15 T494U686(1)004A(2) 2.7 6.0 0.60 387 348 155 1
468 B/3528-21 T494B686(1)004A(2) 2.7 6.0 2.00 206 185 82 1
468 A/3216-18 T494A686(1)004A(2) 2.7 30.0 3.00 158 142 63 1
4100 D/7343-31 T494D107(1)004A(2) 4.0 8.0 0.20 866 779 346 1
4100 C/6032-28 T494C107(1)004A(2) 4.0 8.0 0.20 742 668 297 1
4100 U/6032-15 T494U107(1)004A(2) 4.0 10.0 1.00 300 270 120 1
4100 B/3528-21 T494B107(M)004A(2) 4.0 8.0 0.65 362 326 145 1
4100 A/3216-18 T494A107(M)004A(2) 4.0 30.0 3.00 158 142 63 1
4100 T/3528-12 T494T107(M)004A(2) 4.0 30.0 4.50 125 113 50 1
4150 D/7343-31 T494D157(1)004A(2) 6.0 8.0 0.15 1000 900 400 1
4150 V/7343-20 T494V157(1)004A(2) 6.0 8.0 0.20 791 712 316 1
4150 C/6032-28 T494C157(1)004A(2) 6.0 8.0 0.30 606 545 242 1
4150 B/3528-21 T494B157(M)004A(2) 6.0 12.0 1.00 292 263 117 1
4220 V/7343-20 T494V227(1)004A(2) 8.8 8.0 0.30 645 581 258 1
4220 B/3528-21 T494B227(M)004A(2) 8.8 8.0 0.40 461 415 184 1
4330 D/7343-31 T494D337(1)004A(2) 13.2 8.0 0.15 1000 900 400 1
4330 C/6032-28 T494C337(1)004A(2) 13.2 10.0 0.09 1106 995 442 1
4330 V/7343-20 T494V337(1)004A(2) 13.2 12.0 0.30 645 581 258 1
4470 X/7343-43 T494X477(1)004A(2) 18.8 8.0 0.15 1049 944 420 1
4470 D/7343-31 T494D477(1)004A(2) 18.8 8.0 0.15 1000 900 400 1
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 10
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 66
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
4680 X/7343-43 T494X687(M)004A(2) 27.2 12.0 0.10 1285 1157 514 1
4680 D/7343-31 T494D687(M)004A(2) 27. 2 12.0 0.15 1000 900 400 1
41000 X/7343-43 T494X108(1)004A(2) 40.0 12.0 0.10 1285 1157 514 1
41000 E/7360-38 T494E108(M)004A(2) 40.0 15.0 0.08 1581 1423 632 1
6.3 2.2 A/3216-18 T494A225(1)006A(2) 0.5 6.0 6.0 112 101 45 1
6.3 3.3 A/3216-18 T494A335(1)006A(2) 0.5 6.0 6.0 112 101 45 1
6.3 4.7 A/3216-18 T494A475(1)006A(2) 0.5 6.0 3.5 146 131 58 1
6.3 4.7 S/3216-12 T494S475(1)006A(2) 0.5 6.0 8.0 87 78 35 1
6.3 6.8 B/3528-21 T494B685(1)006A(2) 0.5 6.0 1.2 266 239 106 1
6.3 6.8 A/3216-18 T494A685(1)006A(2) 0.5 6.0 2.0 194 175 78 1
6.3 6.8 S/3216-12 T494S685(1)006A(2) 0.5 6.0 9.0 82 74 33 1
6.3 10 B/3528-21 T494B106(1)006A(2) 0.6 6.0 1.0 292 263 117 1
6.3 10 A/3216-18 T494A106(1)006A(2) 0.6 6.0 2.0 194 175 78 1
6.3 10 T/3528-12 T494T106(1)006A(2) 0.6 6.0 1.2 242 218 97 1
6.3 10 S/3216-12 T494S106(M)006A(2) 0.6 10.0 9.0 82 74 33 1
6.3 15 C/6032-28 T494C156(1)006A(2) 0.9 6.0 0.6 428 385 171 1
6.3 15 B/3528-21 T494B156(1)006A(2) 0.9 6.0 0.7 348 313 139 1
6.3 15 A/3216-18 T494A156(1)006A(2) 0.9 6.0 2.0 194 175 78 1
6.3 15 T/3528-12 T494T156(1)006A(2) 0.9 6.0 2.5 167 150 67 1
6.3 15 S/3216-12 T494S156(M)006A(2) 0.9 10.0 10.0 77 69 31 1
6.3 22 C/6032-28 T494C226(1)006A(2) 1.4 6.0 0.5 469 422 188 1
6.3 22 U/6032-15 T494U226(1)006A(2) 1.4 6.0 0.8 335 302 134 1
6.3 22 B/3528-21 T494B226(1)006A(2) 1.4 6.0 0.6 376 338 150 1
6.3 22 A/3216-18 T494A226(1)006A(2) 1.4 6.0 3.0 158 142 63 1
6.3 22 T/3528-12 T494T226(M)006A(2) 1.4 8.0 3.5 141 127 56 1
6.3 33 C/6032-28 T494C336(1)006A(2) 2.1 6.0 0.3 606 545 242 1
6.3 33 U/6032-15 T494U336(1)006A(2) 2.1 6.0 0.6 387 348 155 1
6.3 33 B/3528-21 T494B336(1)006A(2) 2.1 6.0 0.6 376 338 150 1
6.3 33 A/3216-18 T494A336(1)006A(2) 2.1 12.0 2.0 194 175 78 1
6.3 33 T/3528-12 T494T336(M)006A(2) 2.1 12.0 4.0 132 119 53 1
6.3 47 D/7343-31 T494D476(1)006A(2) 3.0 6.0 0.22 826 743 330 1
6.3 47 C/6032-28 T494C476(1)006A(2) 3.0 6.0 0.25 663 597 265 1
6.3 47 U/6032-15 T494U476(1)006A(2) 3.0 6.0 0.60 387 348 155 1
6.3 47 B/3528-21 T494B476(1)006A(2) 3.0 6.0 0.50 412 371 165 1
6.3 47 A/3216-18 T494A476(M)006A(2) 3.0 12.0 2.50 173 156 69 1
6.3 47 T/3528-12 T494T476(1)006A(2) 3.0 24.0 4.00 132 119 53 1
6.3 68 D/7343-31 T494D686(1)006A(2) 4.3 6.0 0.20 866 779 346 1
6.3 68 C/6032-28 T494C686(1)006A(2) 4.3 6.0 0.20 742 668 297 1
6.3 68 U/6032-15 T494U686(1)006A(2) 4.3 10.0 1.00 300 270 120 1
6.3 68 B/3528-21 T494B686(M)006A(2) 4.3 8.0 0.65 362 326 145 1
6.3 68 A/3216-18 T494A686(1)006A(2) 4.3 30.0 3.00 158 142 63 1
6.3 100 D/7343-31 T494D107(1)006A(2) 6.3 8.0 0.15 1000 900 400 1
6.3 100 V/7343-20 T494V107(1)006A(2) 6.3 8.0 0.20 791 712 316 1
6.3 100 C/6032-28 T494C107(1)006A(2) 6.3 8.0 0.30 606 545 242 1
6.3 100 U/6032-15 T494U107(M)006A(2) 6.3 10.0 1.20 274 247 110 1
6.3 100 B/3528-21 T494B107(1)006A(2) 6.3 15.0 1.50 238 214 95 1
6.3 150 B/3528-21 T494B157M006A(2) 9.5 15.0 2.25 194 175 78 1
6.3 150 D/7343-31 T494D157(1)006A(2) 9.5 8.0 0.15 1000 900 400 1
6.3 150 C/6032-28 T494C157(M)006A(2) 9.5 8.0 0.30 606 545 242 1
6.3 150 V/7343-20 T494V157(1)006A(2) 9.5 8.0 0.30 645 581 258 1
6.3 220 X/7343-43 T494X227(1)006A(2) 13.9 8.0 0.15 1049 944 420 1
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
T494 T336 M004 A T
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
4680 X/7343-43 T494X687(M)004A(2) 27.2 12.0 0.10 1285 1157 514 1
4680 D/7343-31 T494D687(M)004A(2) 27. 2 12.0 0.15 1000 900 400 1
41000 X/7343-43 T494X108(1)004A(2) 40.0 12.0 0.10 1285 1157 514 1
41000 E/7360-38 T494E108(M)004A(2) 40.0 15.0 0.08 1581 1423 632 1
6.3 2.2 A/3216-18 T494A225(1)006A(2) 0.5 6.0 6.0 112 101 45 1
6.3 3.3 A/3216-18 T494A335(1)006A(2) 0.5 6.0 6.0 112 101 45 1
6.3 4.7 A/3216-18 T494A475(1)006A(2) 0.5 6.0 3.5 146 131 58 1
6.3 4.7 S/3216-12 T494S475(1)006A(2) 0.5 6.0 8.0 87 78 35 1
6.3 6.8 B/3528-21 T494B685(1)006A(2) 0.5 6.0 1.2 266 239 106 1
6.3 6.8 A/3216-18 T494A685(1)006A(2) 0.5 6.0 2.0 194 175 78 1
6.3 6.8 S/3216-12 T494S685(1)006A(2) 0.5 6.0 9.0 82 74 33 1
6.3 10 B/3528-21 T494B106(1)006A(2) 0.6 6.0 1.0 292 263 117 1
6.3 10 A/3216-18 T494A106(1)006A(2) 0.6 6.0 2.0 194 175 78 1
6.3 10 T/3528-12 T494T106(1)006A(2) 0.6 6.0 1.2 242 218 97 1
6.3 10 S/3216-12 T494S106(M)006A(2) 0.6 10.0 9.0 82 74 33 1
6.3 15 C/6032-28 T494C156(1)006A(2) 0.9 6.0 0.6 428 385 171 1
6.3 15 B/3528-21 T494B156(1)006A(2) 0.9 6.0 0.7 348 313 139 1
6.3 15 A/3216-18 T494A156(1)006A(2) 0.9 6.0 2.0 194 175 78 1
6.3 15 T/3528-12 T494T156(1)006A(2) 0.9 6.0 2.5 167 150 67 1
6.3 15 S/3216-12 T494S156(M)006A(2) 0.9 10.0 10.0 77 69 31 1
6.3 22 C/6032-28 T494C226(1)006A(2) 1.4 6.0 0.5 469 422 188 1
6.3 22 U/6032-15 T494U226(1)006A(2) 1.4 6.0 0.8 335 302 134 1
6.3 22 B/3528-21 T494B226(1)006A(2) 1.4 6.0 0.6 376 338 150 1
6.3 22 A/3216-18 T494A226(1)006A(2) 1.4 6.0 3.0 158 142 63 1
6.3 22 T/3528-12 T494T226(M)006A(2) 1.4 8.0 3.5 141 127 56 1
6.3 33 C/6032-28 T494C336(1)006A(2) 2.1 6.0 0.3 606 545 242 1
6.3 33 U/6032-15 T494U336(1)006A(2) 2.1 6.0 0.6 387 348 155 1
6.3 33 B/3528-21 T494B336(1)006A(2) 2.1 6.0 0.6 376 338 150 1
6.3 33 A/3216-18 T494A336(1)006A(2) 2.1 12.0 2.0 194 175 78 1
6.3 33 T/3528-12 T494T336(M)006A(2) 2.1 12.0 4.0 132 119 53 1
6.3 47 D/7343-31 T494D476(1)006A(2) 3.0 6.0 0.22 826 743 330 1
6.3 47 C/6032-28 T494C476(1)006A(2) 3.0 6.0 0.25 663 597 265 1
6.3 47 U/6032-15 T494U476(1)006A(2) 3.0 6.0 0.60 387 348 155 1
6.3 47 B/3528-21 T494B476(1)006A(2) 3.0 6.0 0.50 412 371 165 1
6.3 47 A/3216-18 T494A476(M)006A(2) 3.0 12.0 2.50 173 156 69 1
6.3 47 T/3528-12 T494T476(1)006A(2) 3.0 24.0 4.00 132 119 53 1
6.3 68 D/7343-31 T494D686(1)006A(2) 4.3 6.0 0.20 866 779 346 1
6.3 68 C/6032-28 T494C686(1)006A(2) 4.3 6.0 0.20 742 668 297 1
6.3 68 U/6032-15 T494U686(1)006A(2) 4.3 10.0 1.00 300 270 120 1
6.3 68 B/3528-21 T494B686(M)006A(2) 4.3 8.0 0.65 362 326 145 1
6.3 68 A/3216-18 T494A686(1)006A(2) 4.3 30.0 3.00 158 142 63 1
6.3 100 D/7343-31 T494D107(1)006A(2) 6.3 8.0 0.15 1000 900 400 1
6.3 100 V/7343-20 T494V107(1)006A(2) 6.3 8.0 0.20 791 712 316 1
6.3 100 C/6032-28 T494C107(1)006A(2) 6.3 8.0 0.30 606 545 242 1
6.3 100 U/6032-15 T494U107(M)006A(2) 6.3 10.0 1.20 274 247 110 1
6.3 100 B/3528-21 T494B107(1)006A(2) 6.3 15.0 1.50 238 214 95 1
6.3 150 B/3528-21 T494B157M006A(2) 9.5 15.0 2.25 194 175 78 1
6.3 150 D/7343-31 T494D157(1)006A(2) 9.5 8.0 0.15 1000 900 400 1
6.3 150 C/6032-28 T494C157(M)006A(2) 9.5 8.0 0.30 606 545 242 1
6.3 150 V/7343-20 T494V157(1)006A(2) 9.5 8.0 0.30 645 581 258 1
6.3 220 X/7343-43 T494X227(1)006A(2) 13.9 8.0 0.15 1049 944 420 1
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 11
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 77
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
6.3 220 D/7343-31 T494D227(1)006A(2) 13.9 8.0 0.15 1000 900 400 1
6.3 220 C/6032-28 T494C227(M)006A(2) 13.9 10.0 0.30 606 545 242 1
6.3 220 V/7343-20 T494V227(M)006A(2) 13.9 12.0 0.30 645 581 258 1
6.3 330 X/7343-43 T494X337(1)006A(2) 20.8 8.0 0.15 1049 944 420 1
6.3 330 D/7343-31 T494D337(1)006A(2) 20.8 8.0 0.15 1000 900 400 1
6.3 330 E/7360-38 T494E337(1)006A(2) 20.8 8.0 0.25 894 805 358 1
6.3 470 X/7343-43 T494X477(1)006A(2) 29.6 10.0 0.10 1285 1157 514 1
6.3 470 D/7343-31 T494D477(M)006A(2) 29.6 12.0 0.15 1000 900 400 1
6.3 470 E/7360-38 T494E477(1)006A(2) 29.6 10.0 0.20 1000 900 400 1
6.3 680 E/7360-38 T494E687(M)006A(2) 42.8 12.0 0.10 1414 1273 566 1
6.3 680 X/7343-43 T494X687(1)006A(2) 42.8 12.0 0.10 1285 1157 514 1
10 1.5 A/3216-18 T494A155(1)010A(2) 0.5 6.0 6.0 112 101 45 1
10 2.2 B/3528-21 T494B225(1)010A(2) 0.5 6.0 1.5 238 214 95 1
10 2.2 A/3216-18 T494A225(1)010A(2) 0.5 6.0 6.0 112 101 45 1
10 3.3 A/3216-18 T494A335(1)010A(2) 0.5 6.0 4.0 137 123 55 1
10 3.3 S/3216-12 T494S335(1)010A(2) 0.5 6.0 9.0 82 74 33 1
10 4.7 B/3528-21 T494B475(1)010A(2) 0.5 6.0 1.5 238 214 95 1
10 4.7 A/3216-18 T494A475(1)010A(2) 0.5 6.0 3.0 158 142 63 1
10 4.7 S/3216-12 T494S475(1)010A(2) 0.5 6.0 9.0 82 74 33 1
10 6.8 B/3528-21 T494B685(1)010A(2) 0.7 6.0 1.2 266 239 106 1
10 6.8 A/3216-18 T494A685(1)010A(2) 0.7 6.0 3.0 158 142 63 1
10 6.8 T/3528-12 T494T685(1)010A(2) 0.7 6.0 2.0 187 168 75 1
10 6.8 S/3216-12 T494S685(M)010A(2) 0.7 10.0 9.0 82 74 33 1
10 10 C/6032-28 T494C106(1)010A(2) 1.0 6.0 0.6 428 385 171 1
10 10 B/3528-21 T494B106(1)010A(2) 1.0 6.0 0.8 326 293 130 1
10 10 A/3216-18 T494A106(1)010A(2) 1.0 6.0 1.8 204 184 82 1
10 10 T/3528-12 T494T106(1)010A(2) 1.0 6.0 3.5 141 127 56 1
10 10 S/3216-12 T494S106(M)010A(2) 1.0 10.0 12.0 71 64 28 1
10 15 C/6032-28 T494C156(1)010A(2) 1.5 6.0 0.5 469 422 188 1
10 15 U/6032-15 T494U156(1)010A(2) 1.5 6.0 0.8 335 302 134 1
10 15 B/3528-21 T494B156(1)010A(2) 1.5 6.0 0.7 348 313 139 1
10 15 A/3216-18 T494A156(1)010A(2) 1.5 6.0 3.2 153 138 61 1
10 15 T/3528-12 T494T156(M)010A(2) 1.5 8.0 3.5 141 127 56 1
10 22 C/6032-28 T494C226(1)010A(2) 2.2 6.0 0.4 524 472 210 1
10 22 U/6032-15 T494U226(1)010A(2) 2.2 6.0 0.8 335 302 134 1
10 22 B/3528-21 T494B226(1)010A(2) 2.2 6.0 0.7 348 313 139 1
10 22 A/3216-18 T494A226(M)010A(2) 2.2 10.0 4.5 129 116 52 1
10 22 T/3528-12 T494T226(M)010A(2) 2.2 12.0 6.0 108 97 43 1
10 33 D/7343-31 T494D336(1)010A(2) 3.3 6.0 0.25 775 698 310 1
10 33 V/7343-20 T494V336(1)010A(2) 3.3 6.0 0.30 645 581 258 1
10 33 C/6032-28 T494C336(1)010A(2) 3.3 6.0 0.30 606 545 242 1
10 33 U/6032-15 T494U336(1)010A(2) 3.3 6.0 0.60 387 348 155 1
10 33 T/3528-12 T494T336(1)010A(2) 3.3 24.0 3.75 137 123 55 1
10 33 B/3528-21 T494B336(1)010A(2) 3.3 6.0 1.40 246 221 98 1
10 33 A/3216-18 T494A336(1)010A(2) 3.3 15.0 4.00 137 123 55 1
10 47 D/7343-31 T494D476(1)010A(2) 4.7 6.0 0.22 826 743 330 1
10 47 V/7343-20 T494V476(1)010A(2) 4.7 6.0 0.30 645 581 258 1
10 47 C/6032-28 T494C476(1)010A(2) 4.7 6.0 0.30 606 545 242 1
10 47 U/6032-15 T494U476(1)010A(2) 4.7 10.0 1.20 274 247 110 1
10 47 B/3528-21 T494B476(M)010A(2) 4.7 8.0 0.65 362 326 145 1
10 68 D/7343-31 T494D686(1)010A(2) 6.8 6.0 0.20 866 779 346 1
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
T494 T336 M004 A T
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
6.3 220 D/7343-31 T494D227(1)006A(2) 13.9 8.0 0.15 1000 900 400 1
6.3 220 C/6032-28 T494C227(M)006A(2) 13.9 10.0 0.30 606 545 242 1
6.3 220 V/7343-20 T494V227(M)006A(2) 13.9 12.0 0.30 645 581 258 1
6.3 330 X/7343-43 T494X337(1)006A(2) 20.8 8.0 0.15 1049 944 420 1
6.3 330 D/7343-31 T494D337(1)006A(2) 20.8 8.0 0.15 1000 900 400 1
6.3 330 E/7360-38 T494E337(1)006A(2) 20.8 8.0 0.25 894 805 358 1
6.3 470 X/7343-43 T494X477(1)006A(2) 29.6 10.0 0.10 1285 1157 514 1
6.3 470 D/7343-31 T494D477(M)006A(2) 29.6 12.0 0.15 1000 900 400 1
6.3 470 E/7360-38 T494E477(1)006A(2) 29.6 10.0 0.20 1000 900 400 1
6.3 680 E/7360-38 T494E687(M)006A(2) 42.8 12.0 0.10 1414 1273 566 1
6.3 680 X/7343-43 T494X687(1)006A(2) 42.8 12.0 0.10 1285 1157 514 1
10 1.5 A/3216-18 T494A155(1)010A(2) 0.5 6.0 6.0 112 101 45 1
10 2.2 B/3528-21 T494B225(1)010A(2) 0.5 6.0 1.5 238 214 95 1
10 2.2 A/3216-18 T494A225(1)010A(2) 0.5 6.0 6.0 112 101 45 1
10 3.3 A/3216-18 T494A335(1)010A(2) 0.5 6.0 4.0 137 123 55 1
10 3.3 S/3216-12 T494S335(1)010A(2) 0.5 6.0 9.0 82 74 33 1
10 4.7 B/3528-21 T494B475(1)010A(2) 0.5 6.0 1.5 238 214 95 1
10 4.7 A/3216-18 T494A475(1)010A(2) 0.5 6.0 3.0 158 142 63 1
10 4.7 S/3216-12 T494S475(1)010A(2) 0.5 6.0 9.0 82 74 33 1
10 6.8 B/3528-21 T494B685(1)010A(2) 0.7 6.0 1.2 266 239 106 1
10 6.8 A/3216-18 T494A685(1)010A(2) 0.7 6.0 3.0 158 142 63 1
10 6.8 T/3528-12 T494T685(1)010A(2) 0.7 6.0 2.0 187 168 75 1
10 6.8 S/3216-12 T494S685(M)010A(2) 0.7 10.0 9.0 82 74 33 1
10 10 C/6032-28 T494C106(1)010A(2) 1.0 6.0 0.6 428 385 171 1
10 10 B/3528-21 T494B106(1)010A(2) 1.0 6.0 0.8 326 293 130 1
10 10 A/3216-18 T494A106(1)010A(2) 1.0 6.0 1.8 204 184 82 1
10 10 T/3528-12 T494T106(1)010A(2) 1.0 6.0 3.5 141 127 56 1
10 10 S/3216-12 T494S106(M)010A(2) 1.0 10.0 12.0 71 64 28 1
10 15 C/6032-28 T494C156(1)010A(2) 1.5 6.0 0.5 469 422 188 1
10 15 U/6032-15 T494U156(1)010A(2) 1.5 6.0 0.8 335 302 134 1
10 15 B/3528-21 T494B156(1)010A(2) 1.5 6.0 0.7 348 313 139 1
10 15 A/3216-18 T494A156(1)010A(2) 1.5 6.0 3.2 153 138 61 1
10 15 T/3528-12 T494T156(M)010A(2) 1.5 8.0 3.5 141 127 56 1
10 22 C/6032-28 T494C226(1)010A(2) 2.2 6.0 0.4 524 472 210 1
10 22 U/6032-15 T494U226(1)010A(2) 2.2 6.0 0.8 335 302 134 1
10 22 B/3528-21 T494B226(1)010A(2) 2.2 6.0 0.7 348 313 139 1
10 22 A/3216-18 T494A226(M)010A(2) 2.2 10.0 4.5 129 116 52 1
10 22 T/3528-12 T494T226(M)010A(2) 2.2 12.0 6.0 108 97 43 1
10 33 D/7343-31 T494D336(1)010A(2) 3.3 6.0 0.25 775 698 310 1
10 33 V/7343-20 T494V336(1)010A(2) 3.3 6.0 0.30 645 581 258 1
10 33 C/6032-28 T494C336(1)010A(2) 3.3 6.0 0.30 606 545 242 1
10 33 U/6032-15 T494U336(1)010A(2) 3.3 6.0 0.60 387 348 155 1
10 33 T/3528-12 T494T336(1)010A(2) 3.3 24.0 3.75 137 123 55 1
10 33 B/3528-21 T494B336(1)010A(2) 3.3 6.0 1.40 246 221 98 1
10 33 A/3216-18 T494A336(1)010A(2) 3.3 15.0 4.00 137 123 55 1
10 47 D/7343-31 T494D476(1)010A(2) 4.7 6.0 0.22 826 743 330 1
10 47 V/7343-20 T494V476(1)010A(2) 4.7 6.0 0.30 645 581 258 1
10 47 C/6032-28 T494C476(1)010A(2) 4.7 6.0 0.30 606 545 242 1
10 47 U/6032-15 T494U476(1)010A(2) 4.7 10.0 1.20 274 247 110 1
10 47 B/3528-21 T494B476(M)010A(2) 4.7 8.0 0.65 362 326 145 1
10 68 D/7343-31 T494D686(1)010A(2) 6.8 6.0 0.20 866 779 346 1
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 12
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 88
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
10 68 C/6032-28 T494C686(1)010A(2) 6.8 6.0 0.30 606 545 242 1
10 68 V/7343-20 T494V686(1)010A(2) 6.8 6.0 0.30 645 581 258 1
10 68 U/6032-15 T494U686(M)010A(2) 6.8 10.0 1.20 274 247 110 1
10 68 B/3528-21 T494B686(M)010A(2) 6.8 10.0 1.50 238 214 95 1
10 100 D/7343-31 T494D107(1)010A(2) 10.0 8.0 0.15 1000 900 400 1
10 100 C/6032-28 T494C107(1)010A(2) 10.0 8.0 0.20 742 668 297 1
10 100 V/7343-20 T494V107(1)010A(2) 10.0 8.0 0.40 559 503 224 1
10 150 X/7343-43 T494X157(1)010A(2) 15.0 8.0 0.15 1049 944 420 1
10 150 D/7343-31 T494D157(1)010A(2) 15.0 8.0 0.15 1000 900 400 1
10 150 C/6032-28 T494C157(1)010A(2) 15.0 10.0 0.70 396 356 158 1
10 150 V/7343-20 T494V157(M)010A(2) 15.0 8.0 0.30 645 581 258 1
10 220 X/7343-43 T494X227(1)010A(2) 22.0 8.0 0.15 1049 944 420 1
10 220 D/7343-31 T494D227(1)010A(2) 22.0 8.0 0.15 1000 900 400 1
10 330 X/7343-43 T494X337(1)010A(2) 33.0 10.0 0.10 1285 1157 514 1
10 330 D/7343-31 T494D337(M)010A(2) 33.0 10.0 0.15 1000 900 400 1
10 330 E/7360-38 T494E337(1)010A(2) 33.0 10.0 0.25 894 805 358 1
10 470 X/7343-43 T494X477(1)010A(2) 47.0 10.0 0.10 1285 1157 514 1
10 470 E/7360-38 T494E477(M)010A(2) 47.0 12.0 0.10 1414 1273 566 1
16 1A/3216-18 T494A105(1)016A(2) 0.5 4.0 6.0 112 101 45 1
16 1.5 A/3216-18 T494A155(1)016A(2) 0.5 6.0 6.0 112 101 45 1
16 2.2 A/3216-18 T494A225(1)016A(2) 0.5 6.0 4.0 137 123 55 1
16 2.2 S/3216-12 T494S225(1)016A(2) 0.5 6.0 10.0 77 69 31 1
16 3.3 B/3528-21 T494B335(1)016A(2) 0.5 6.0 2.0 206 185 82 1
16 3.3 A/3216-18 T494A335(1)016A(2) 0.5 6.0 4.0 137 123 55 1
16 4.7 B/3528-21 T494B475(1)016A(2) 0.8 6.0 1.5 238 214 95 1
16 4.7 A/3216-18 T494A475(1)016A(2) 0.8 6.0 3.0 158 142 63 1
16 4.7 T/3528-12 T494T475(1)016A(2) 0.8 6.0 3.0 153 138 61 1
16 6.8 C/6032-28 T494C685(1)016A(2) 1.1 6.0 0.8 371 334 148 1
16 6.8 B/3528-21 T494B685(1)016A(2) 1.1 6.0 1.2 266 239 106 1
16 6.8 A/3216-18 T494A685(1)016A(2) 1.1 6.0 3.0 158 142 63 1
16 10 C/6032-28 T494C106(1)016A(2) 1.6 6.0 0.6 428 385 171 1
16 10 U/6032-15 T494U106(1)016A(2) 1.6 6.0 1.0 300 270 120 1
16 10 B/3528-21 T494B106(1)016A(2) 1.6 6.0 0.8 326 293 130 1
16 10 A/3216-18 T494A106(1)016A(2) 1.6 8.0 3.0 158 142 63 1
16 10 T/3528-12 T494T106(1)016A(2) 1.6 8.0 6.0 108 97 43 1
16 15 C/6032-28 T494C156(1)016A(2) 2.4 6.0 0.4 524 472 210 1
16 15 U/6032-15 T494U156(1)016A(2) 2.4 6.0 0.8 335 302 134 1
16 15 B/3528-21 T494B156(1)016A(2) 2.4 6.0 0.8 326 293 130 1
16 22 D/7343-31 T494D226(1)016A(2) 3.5 6.0 0.25 775 698 310 1
16 22 C/6032-28 T494C226(1)016A(2) 3.5 6.0 0.35 561 505 224 1
16 22 U/6032-15 T494U226(1)016A(2) 3.5 10.0 1.80 224 202 90 1
16 22 B/3528-21 T494B226(1)016A(2) 3.5 6.0 1.00 292 263 117 1
16 33 D/7343-31 T494D336(1)016A(2) 5.3 6.0 0.25 775 698 310 1
16 33 C/6032-28 T494C336(1)016A(2) 5.3 6.0 0.30 606 545 242 1
16 33 U/6032-15 T494U336(1)016A(2) 5.3 12.0 2.20 202 182 81 1
16 33 B/3528-21 T494B336(1)016A(2) 5.3 8.0 1.20 266 239 106 1
16 47 D/7343-31 T494D476(1)016A(2) 7.5 6.0 0.2 866 779 346 1
16 47 V/7343-20 T494V476(1)016A(2) 7.5 6.0 0.3 645 581 258 1
16 47 C/6032-28 T494C476(1)016A(2) 7.5 6.0 0.5 469 422 188 1
16 68 D/7343-31 T494D686(1)016A(2) 10.9 6.0 0.15 1000 900 400 1
16 68 V/7343-20 T494V686(1)016A(2) 10.9 6.0 0.5 500 450 200 1
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
T494 T336 M004 A T
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
10 68 C/6032-28 T494C686(1)010A(2) 6.8 6.0 0.30 606 545 242 1
10 68 V/7343-20 T494V686(1)010A(2) 6.8 6.0 0.30 645 581 258 1
10 68 U/6032-15 T494U686(M)010A(2) 6.8 10.0 1.20 274 247 110 1
10 68 B/3528-21 T494B686(M)010A(2) 6.8 10.0 1.50 238 214 95 1
10 100 D/7343-31 T494D107(1)010A(2) 10.0 8.0 0.15 1000 900 400 1
10 100 C/6032-28 T494C107(1)010A(2) 10.0 8.0 0.20 742 668 297 1
10 100 V/7343-20 T494V107(1)010A(2) 10.0 8.0 0.40 559 503 224 1
10 150 X/7343-43 T494X157(1)010A(2) 15.0 8.0 0.15 1049 944 420 1
10 150 D/7343-31 T494D157(1)010A(2) 15.0 8.0 0.15 1000 900 400 1
10 150 C/6032-28 T494C157(1)010A(2) 15.0 10.0 0.70 396 356 158 1
10 150 V/7343-20 T494V157(M)010A(2) 15.0 8.0 0.30 645 581 258 1
10 220 X/7343-43 T494X227(1)010A(2) 22.0 8.0 0.15 1049 944 420 1
10 220 D/7343-31 T494D227(1)010A(2) 22.0 8.0 0.15 1000 900 400 1
10 330 X/7343-43 T494X337(1)010A(2) 33.0 10.0 0.10 1285 1157 514 1
10 330 D/7343-31 T494D337(M)010A(2) 33.0 10.0 0.15 1000 900 400 1
10 330 E/7360-38 T494E337(1)010A(2) 33.0 10.0 0.25 894 805 358 1
10 470 X/7343-43 T494X477(1)010A(2) 47.0 10.0 0.10 1285 1157 514 1
10 470 E/7360-38 T494E477(M)010A(2) 47.0 12.0 0.10 1414 1273 566 1
16 1A/3216-18 T494A105(1)016A(2) 0.5 4.0 6.0 112 101 45 1
16 1.5 A/3216-18 T494A155(1)016A(2) 0.5 6.0 6.0 112 101 45 1
16 2.2 A/3216-18 T494A225(1)016A(2) 0.5 6.0 4.0 137 123 55 1
16 2.2 S/3216-12 T494S225(1)016A(2) 0.5 6.0 10.0 77 69 31 1
16 3.3 B/3528-21 T494B335(1)016A(2) 0.5 6.0 2.0 206 185 82 1
16 3.3 A/3216-18 T494A335(1)016A(2) 0.5 6.0 4.0 137 123 55 1
16 4.7 B/3528-21 T494B475(1)016A(2) 0.8 6.0 1.5 238 214 95 1
16 4.7 A/3216-18 T494A475(1)016A(2) 0.8 6.0 3.0 158 142 63 1
16 4.7 T/3528-12 T494T475(1)016A(2) 0.8 6.0 3.0 153 138 61 1
16 6.8 C/6032-28 T494C685(1)016A(2) 1.1 6.0 0.8 371 334 148 1
16 6.8 B/3528-21 T494B685(1)016A(2) 1.1 6.0 1.2 266 239 106 1
16 6.8 A/3216-18 T494A685(1)016A(2) 1.1 6.0 3.0 158 142 63 1
16 10 C/6032-28 T494C106(1)016A(2) 1.6 6.0 0.6 428 385 171 1
16 10 U/6032-15 T494U106(1)016A(2) 1.6 6.0 1.0 300 270 120 1
16 10 B/3528-21 T494B106(1)016A(2) 1.6 6.0 0.8 326 293 130 1
16 10 A/3216-18 T494A106(1)016A(2) 1.6 8.0 3.0 158 142 63 1
16 10 T/3528-12 T494T106(1)016A(2) 1.6 8.0 6.0 108 97 43 1
16 15 C/6032-28 T494C156(1)016A(2) 2.4 6.0 0.4 524 472 210 1
16 15 U/6032-15 T494U156(1)016A(2) 2.4 6.0 0.8 335 302 134 1
16 15 B/3528-21 T494B156(1)016A(2) 2.4 6.0 0.8 326 293 130 1
16 22 D/7343-31 T494D226(1)016A(2) 3.5 6.0 0.25 775 698 310 1
16 22 C/6032-28 T494C226(1)016A(2) 3.5 6.0 0.35 561 505 224 1
16 22 U/6032-15 T494U226(1)016A(2) 3.5 10.0 1.80 224 202 90 1
16 22 B/3528-21 T494B226(1)016A(2) 3.5 6.0 1.00 292 263 117 1
16 33 D/7343-31 T494D336(1)016A(2) 5.3 6.0 0.25 775 698 310 1
16 33 C/6032-28 T494C336(1)016A(2) 5.3 6.0 0.30 606 545 242 1
16 33 U/6032-15 T494U336(1)016A(2) 5.3 12.0 2.20 202 182 81 1
16 33 B/3528-21 T494B336(1)016A(2) 5.3 8.0 1.20 266 239 106 1
16 47 D/7343-31 T494D476(1)016A(2) 7.5 6.0 0.2 866 779 346 1
16 47 V/7343-20 T494V476(1)016A(2) 7.5 6.0 0.3 645 581 258 1
16 47 C/6032-28 T494C476(1)016A(2) 7.5 6.0 0.5 469 422 188 1
16 68 D/7343-31 T494D686(1)016A(2) 10.9 6.0 0.15 1000 900 400 1
16 68 V/7343-20 T494V686(1)016A(2) 10.9 6.0 0.5 500 450 200 1
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 13
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 99
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
T494 T336 M004 A T
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
16 68 C/6032-28 T494C686(1)016A(2) 10.9 12.0 1.0 332 299 133 1
16 100 X/7343-43 T494X107(1)016A(2) 16.0 8.0 0.15 1049 944 420 1
16 100 D/7343-31 T494D107(1)016A(2) 16.0 8.0 0.15 1000 900 400 1
16 100 V/7343-20 T494V107(1)016A(2) 16.0 12.0 0.5 500 450 200 1
16 150 X/7343-43 T494X157(1)016A(2) 24.0 8.0 0.15 1049 944 420 1
16 150 D/7343-31 T494D157(1)016A(2) 24.0 12.0 0.4 612 551 245 1
16 220 X/7343-43 T494X227(1)016A(2) 35.2 10.0 0.4 642 578 257 1
16 220 E/7360-38 T494E227(1)016A(2) 35.2 7. 2 0.5 632 569 253 1
20 0.68 A/3216-18 T494A684(1)020A(2) 0.5 4.0 8.0 97 87 39 1
20 1A/3216-18 T494A105(1)020A(2) 0.5 4.0 5.5 117 105 47 1
20 1S/3216-12 T494S105(1)020A(2) 0.5 6.0 10.0 77 69 31 1
20 1.5 A/3216-18 T494A155(1)020AS(2) 0.5 6.0 4.5 129 116 52 1
20 1.5 S/3216-12 T494S155(1)020A(2) 0.5 6.0 9.0 82 74 33 1
20 2.2 B/3528-21 T494B225(1)020A(2) 0.5 6.0 1.5 238 214 95 1
20 2.2 A/3216-18 T494A225(1)020A(2) 0.5 6.0 4.0 137 123 55 1
20 3.3 B/3528-21 T494B335(1)020A(2) 0.7 6.0 1.3 256 230 102 1
20 3.3 A/3216-18 T494A335(1)020A(2) 0.7 6.0 4.0 137 123 55 1
20 3.3 T/3528-12 T494T335(1)020A(2) 0.7 6.0 4.0 132 119 53 1
20 4.7 C/6032-28 T494C475(1)020A(2) 0.9 6.0 0.6 428 385 171 1
20 4.7 B/3528-21 T494B475(1)020A(2) 0.9 6.0 1.0 292 263 117 1
20 4.7 A/3216-18 T494A475(1)020A(2) 0.9 6.0 3.0 158 142 63 1
20 6.8 C/6032-28 T494C685(1)020A(2) 1.4 6.0 0.6 428 385 171 1
20 6.8 U/6032-15 T494U685(1)020A(2) 1.4 6.0 1.4 254 229 102 1
20 6.8 B/3528-21 T494B685(1)020A(2) 1.4 6.0 1.0 292 263 117 1
20 6.8 A/3216-18 T494A685(M)020A(2) 1.4 8.0 3.0 158 142 63 1
20 10 C/6032-28 T494C106(1)020A(2) 2.0 6.0 0.5 469 422 188 1
20 10 U/6032-15 T494U106(1)020A(2) 2.0 6.0 0.8 335 302 134 1
20 10 B/3528-21 T494B106(1)020A(2) 2.0 6.0 1.0 292 263 117 1
20 10 A/3216-18 T494A106(M)020A(2) 2.0 10.0 3.0 158 142 63 1
20 15 D/7343-31 T494D156(1)020A(2) 3.0 6.0 0.35 655 590 262 1
20 15 C/6032-28 T494C156(1)020A(2) 3.0 6.0 0.40 524 472 210 1
20 22 D/7343-31 T494D226(1)020A(2) 4.4 6.0 0.3 707 636 283 1
20 22 V/7343-20 T494V226(1)020A(2) 4.4 6.0 0.4 559 503 224 1
20 22 C/6032-28 T494C226(1)020A(2) 4.4 6.0 0.4 524 472 210 1
20 22 B/3528-21 T494B226(1)020A(2) 4.4 8.0 3.0 168 151 67 1
20 33 D/7343-31 T494D336(1)020A(2) 6.6 6.0 0.25 775 698 310 1
20 33 C/6032-28 T494C336(M)020A(2) 6.6 6.0 0.40 524 472 210 1
20 33 V/7343-20 T494V336(1)020A(2) 6.6 8.0 0.40 559 503 224 1
20 33 B/3528-21 T494B336(M)020A(2) 6.6 10.0 3.00 168 151 67 1
20 47 C/6032-28 T494C476(M)020A(2) 9.4 10.0 0.80 371 334 148 1
20 47 D/7343-31 T494D476(1)020A(2) 9.4 6.0 0.20 866 779 346 1
20 68 X/7343-43 T494X686(1)020A(2) 13.6 6.0 0.20 908 817 363 1
20 68 D/7343-31 T494D686(1)020A(2) 13.6 8.0 0.20 866 779 346 1
20 100 D/7343-31 T494D107(1)025A(2) 20.0 6.0 0.68 471 424 188 1
20 100 X/7343-43 T494X107(1)020A(2) 20.0 8.0 0.15 1049 944 420 1
20 100 E/7360-38 T494E107(1)020A(2) 20.0 8.0 0.30 816 734 326 1
20 150 X/7343-43 T494X157(1)020A(2) 30.0 10.0 0.30 742 668 297 1
25 0.33 A/3216-18 T494A334(1)025A(2) 0.5 4.0 10.0 87 78 35 1
25 0.47 A/3216-18 T494A474(1)025A(2) 0.5 4.0 9.0 91 82 36 1
25 0.68 A/3216-18 T494A684(1)025A(2) 0.5 4.0 6.0 112 101 45 1
25 1B/3528-21 T494B105(1)025A(2) 0.5 4.0 2.0 206 185 82 1
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
16 68 C/6032-28 T494C686(1)016A(2) 10.9 12.0 1.0 332 299 133 1
16 100 X/7343-43 T494X107(1)016A(2) 16.0 8.0 0.15 1049 944 420 1
16 100 D/7343-31 T494D107(1)016A(2) 16.0 8.0 0.15 1000 900 400 1
16 100 V/7343-20 T494V107(1)016A(2) 16.0 12.0 0.5 500 450 200 1
16 150 X/7343-43 T494X157(1)016A(2) 24.0 8.0 0.15 1049 944 420 1
16 150 D/7343-31 T494D157(1)016A(2) 24.0 12.0 0.4 612 551 245 1
16 220 X/7343-43 T494X227(1)016A(2) 35.2 10.0 0.4 642 578 257 1
16 220 E/7360-38 T494E227(1)016A(2) 35.2 7. 2 0.5 632 569 253 1
20 0.68 A/3216-18 T494A684(1)020A(2) 0.5 4.0 8.0 97 87 39 1
20 1A/3216-18 T494A105(1)020A(2) 0.5 4.0 5.5 117 105 47 1
20 1S/3216-12 T494S105(1)020A(2) 0.5 6.0 10.0 77 69 31 1
20 1.5 A/3216-18 T494A155(1)020AS(2) 0.5 6.0 4.5 129 116 52 1
20 1.5 S/3216-12 T494S155(1)020A(2) 0.5 6.0 9.0 82 74 33 1
20 2.2 B/3528-21 T494B225(1)020A(2) 0.5 6.0 1.5 238 214 95 1
20 2.2 A/3216-18 T494A225(1)020A(2) 0.5 6.0 4.0 137 123 55 1
20 3.3 B/3528-21 T494B335(1)020A(2) 0.7 6.0 1.3 256 230 102 1
20 3.3 A/3216-18 T494A335(1)020A(2) 0.7 6.0 4.0 137 123 55 1
20 3.3 T/3528-12 T494T335(1)020A(2) 0.7 6.0 4.0 132 119 53 1
20 4.7 C/6032-28 T494C475(1)020A(2) 0.9 6.0 0.6 428 385 171 1
20 4.7 B/3528-21 T494B475(1)020A(2) 0.9 6.0 1.0 292 263 117 1
20 4.7 A/3216-18 T494A475(1)020A(2) 0.9 6.0 3.0 158 142 63 1
20 6.8 C/6032-28 T494C685(1)020A(2) 1.4 6.0 0.6 428 385 171 1
20 6.8 U/6032-15 T494U685(1)020A(2) 1.4 6.0 1.4 254 229 102 1
20 6.8 B/3528-21 T494B685(1)020A(2) 1.4 6.0 1.0 292 263 117 1
20 6.8 A/3216-18 T494A685(M)020A(2) 1.4 8.0 3.0 158 142 63 1
20 10 C/6032-28 T494C106(1)020A(2) 2.0 6.0 0.5 469 422 188 1
20 10 U/6032-15 T494U106(1)020A(2) 2.0 6.0 0.8 335 302 134 1
20 10 B/3528-21 T494B106(1)020A(2) 2.0 6.0 1.0 292 263 117 1
20 10 A/3216-18 T494A106(M)020A(2) 2.0 10.0 3.0 158 142 63 1
20 15 D/7343-31 T494D156(1)020A(2) 3.0 6.0 0.35 655 590 262 1
20 15 C/6032-28 T494C156(1)020A(2) 3.0 6.0 0.40 524 472 210 1
20 22 D/7343-31 T494D226(1)020A(2) 4.4 6.0 0.3 707 636 283 1
20 22 V/7343-20 T494V226(1)020A(2) 4.4 6.0 0.4 559 503 224 1
20 22 C/6032-28 T494C226(1)020A(2) 4.4 6.0 0.4 524 472 210 1
20 22 B/3528-21 T494B226(1)020A(2) 4.4 8.0 3.0 168 151 67 1
20 33 D/7343-31 T494D336(1)020A(2) 6.6 6.0 0.25 775 698 310 1
20 33 C/6032-28 T494C336(M)020A(2) 6.6 6.0 0.40 524 472 210 1
20 33 V/7343-20 T494V336(1)020A(2) 6.6 8.0 0.40 559 503 224 1
20 33 B/3528-21 T494B336(M)020A(2) 6.6 10.0 3.00 168 151 67 1
20 47 C/6032-28 T494C476(M)020A(2) 9.4 10.0 0.80 371 334 148 1
20 47 D/7343-31 T494D476(1)020A(2) 9.4 6.0 0.20 866 779 346 1
20 68 X/7343-43 T494X686(1)020A(2) 13.6 6.0 0.20 908 817 363 1
20 68 D/7343-31 T494D686(1)020A(2) 13.6 8.0 0.20 866 779 346 1
20 100 D/7343-31 T494D107(1)025A(2) 20.0 6.0 0.68 471 424 188 1
20 100 X/7343-43 T494X107(1)020A(2) 20.0 8.0 0.15 1049 944 420 1
20 100 E/7360-38 T494E107(1)020A(2) 20.0 8.0 0.30 816 734 326 1
20 150 X/7343-43 T494X157(1)020A(2) 30.0 10.0 0.30 742 668 297 1
25 0.33 A/3216-18 T494A334(1)025A(2) 0.5 4.0 10.0 87 78 35 1
25 0.47 A/3216-18 T494A474(1)025A(2) 0.5 4.0 9.0 91 82 36 1
25 0.68 A/3216-18 T494A684(1)025A(2) 0.5 4.0 6.0 112 101 45 1
25 1B/3528-21 T494B105(1)025A(2) 0.5 4.0 2.0 206 185 82 1
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 14
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 1010
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
T494 T336 M004 A T
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
25 1A/3216-18 T494A105(1)025A(2) 0.5 4.0 4.0 137 123 55 1
25 1.5 B/3528-21 T494B155(1)025A(2) 0.5 6.0 1.5 238 214 95 1
25 1.5 A/3216-18 T494A155(1)025A(2) 0.5 6.0 3.0 158 142 63 1
25 2.2 C/6032-28 T494C225(1)025A(2) 0.6 6.0 2.2 224 202 90 1
25 2.2 B/3528-21 T494B225(1)025A(2) 0.6 6.0 1.2 266 239 106 1
25 2.2 A/3216-18 T494A225(1)025A(2) 0.6 6.0 3.0 158 142 63 1
25 3.3 C/6032-28 T494C335(1)025A(2) 0.8 6.0 1.2 303 273 121 1
25 3.3 B/3528-21 T494B335(1)025A(2) 0.8 6.0 2.0 206 185 82 1
25 3.3 A/3216-18 T494A335(1)025A(2) 0.8 6.0 3.0 158 142 63 1
25 4.7 C/6032-28 T494C475(1)025A(2) 1.2 6.0 0.6 428 385 171 1
25 4.7 B/3528-21 T494B475(1)025A(2) 1.2 6.0 1.0 292 263 117 1
25 4.7 A/3216-18 T494A475(M)025A(2) 1.2 8.0 3.0 158 142 63 1
25 6.8 C/6032-28 T494C685(1)025A(2) 1.7 6.0 0.6 428 385 171 1
25 6.8 B/3528-21 T494B685(1)025A(2) 1.7 8.0 2.0 206 185 82 1
25 10 D/7343-31 T494D106(1)025A(2) 2.5 6.0 0.4 612 551 245 1
25 10 C/6032-28 T494C106(1)025A(2) 2.5 6.0 0.6 428 385 171 1
25 10 B/3528-21 T494B106(1)025A(2) 2.5 8.0 3.0 168 151 67 1
25 15 D/7343-31 T494D156(1)025A(2) 3.8 6.0 0.35 655 590 262 1
25 15 C/6032-28 T494C156(1)025A(2) 3.8 6.0 0.90 350 315 140 1
25 15 B/3528-21 T494B156(1)025A(2) 3.8 8.0 3.00 168 151 67 1
25 22 D/7343-31 T494D226(1)025A(2) 5.5 6.0 0.3 707 636 283 1
25 22 C/6032-28 T494C226(1)025A(2) 5.5 6.0 1.0 332 299 133 1
25 22 V/7343-20 T494V226(1)025A(2) 5.5 6.0 0.5 500 450 200 1
25 33 X/7343-43 T494X336(1)025A(2) 8.3 6.0 0.3 742 668 297 1
25 33 D/7343-31 T494D336(1)025A(2) 8.3 6.0 0.4 612 551 245 1
25 33 C/6032-28 T494C336(1)025A(2) 8.3 10.0 1.0 332 299 133 1
25 47 X/7343-43 T494X476(1)025A(2) 11.8 6.0 0.3 742 668 297 1
25 47 D/7343-31 T494D476(1)025A(2) 11.8 10.0 0.2 866 779 346 1
25 68 X/7343-43 T494X686(M)025A(2) 17.0 8.0 0.3 742 668 297 1
25 68 D/7343-31 T494D686(M)025A(2) 17.0 10.0 0.5 548 493 219 1
25 100 X/7343-43 T494X107(M)025A(2) 25.0 8.0 0.25 812 731 325 1
35 0.1 A/3216-18 T494A104(1)035A(2) 0.5 4.0 10.0 87 78 35 1
35 0.15 A/3216-18 T494A154(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 0.22 A/3216-18 T494A224(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 0.33 A/3216-18 T494A334(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 0.47 B/3528-21 T494B474(1)035A(2) 0.5 4.0 2.5 184 166 74 1
35 0.47 A/3216-18 T494A474(1)035A(2) 0.5 4.0 4.0 137 123 55 1
35 0.68 B/3528-21 T494B684(1)035A(2) 0.5 4.0 2.5 184 166 74 1
35 0.68 A/3216-18 T494A684(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 1B/3528-21 T494B105(1)035A(2) 0.5 4.0 2.0 206 185 82 1
35 1A/3216-18 T494A105(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 1.5 A/3216-18 T494A155(1)035A(2) 0.5 6.0 4.0 137 123 55 1
35 1.5 C/6032-28 T494C155(1)035A(2) 0.5 6.0 2.5 210 189 84 1
35 1.5 B/3528-21 T494B155(1)035A(2) 0.5 6.0 3.0 168 151 67 1
35 2.2 A/3216-18 T494A225(1)035A(2) 0.8 6.0 3.0 158 142 63 1
35 2.2 C/6032-28 T494C225(1)035A(2) 0.8 6.0 1.5 271 244 108 1
35 2.2 B/3528-21 T494B225(1)035A(2) 0.8 6.0 2.5 184 166 74 1
35 3.3 C/6032-28 T494C335(1)035A(2) 1.2 6.0 0.8 371 334 148 1
35 3.3 B/3528-21 T494B335(1)035A(2) 1.2 6.0 1.3 256 230 102 1
35 4.7 B/3528-21 T494B475(1)035A(2) 1.6 6.0 1.5 238 214 95 1
35 4.7 D/7343-31 T494D475(1)035A(2) 1.6 6.0 0.7 463 417 185 1
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
25 1A/3216-18 T494A105(1)025A(2) 0.5 4.0 4.0 137 123 55 1
25 1.5 B/3528-21 T494B155(1)025A(2) 0.5 6.0 1.5 238 214 95 1
25 1.5 A/3216-18 T494A155(1)025A(2) 0.5 6.0 3.0 158 142 63 1
25 2.2 C/6032-28 T494C225(1)025A(2) 0.6 6.0 2.2 224 202 90 1
25 2.2 B/3528-21 T494B225(1)025A(2) 0.6 6.0 1.2 266 239 106 1
25 2.2 A/3216-18 T494A225(1)025A(2) 0.6 6.0 3.0 158 142 63 1
25 3.3 C/6032-28 T494C335(1)025A(2) 0.8 6.0 1.2 303 273 121 1
25 3.3 B/3528-21 T494B335(1)025A(2) 0.8 6.0 2.0 206 185 82 1
25 3.3 A/3216-18 T494A335(1)025A(2) 0.8 6.0 3.0 158 142 63 1
25 4.7 C/6032-28 T494C475(1)025A(2) 1.2 6.0 0.6 428 385 171 1
25 4.7 B/3528-21 T494B475(1)025A(2) 1.2 6.0 1.0 292 263 117 1
25 4.7 A/3216-18 T494A475(M)025A(2) 1.2 8.0 3.0 158 142 63 1
25 6.8 C/6032-28 T494C685(1)025A(2) 1.7 6.0 0.6 428 385 171 1
25 6.8 B/3528-21 T494B685(1)025A(2) 1.7 8.0 2.0 206 185 82 1
25 10 D/7343-31 T494D106(1)025A(2) 2.5 6.0 0.4 612 551 245 1
25 10 C/6032-28 T494C106(1)025A(2) 2.5 6.0 0.6 428 385 171 1
25 10 B/3528-21 T494B106(1)025A(2) 2.5 8.0 3.0 168 151 67 1
25 15 D/7343-31 T494D156(1)025A(2) 3.8 6.0 0.35 655 590 262 1
25 15 C/6032-28 T494C156(1)025A(2) 3.8 6.0 0.90 350 315 140 1
25 15 B/3528-21 T494B156(1)025A(2) 3.8 8.0 3.00 168 151 67 1
25 22 D/7343-31 T494D226(1)025A(2) 5.5 6.0 0.3 707 636 283 1
25 22 C/6032-28 T494C226(1)025A(2) 5.5 6.0 1.0 332 299 133 1
25 22 V/7343-20 T494V226(1)025A(2) 5.5 6.0 0.5 500 450 200 1
25 33 X/7343-43 T494X336(1)025A(2) 8.3 6.0 0.3 742 668 297 1
25 33 D/7343-31 T494D336(1)025A(2) 8.3 6.0 0.4 612 551 245 1
25 33 C/6032-28 T494C336(1)025A(2) 8.3 10.0 1.0 332 299 133 1
25 47 X/7343-43 T494X476(1)025A(2) 11.8 6.0 0.3 742 668 297 1
25 47 D/7343-31 T494D476(1)025A(2) 11.8 10.0 0.2 866 779 346 1
25 68 X/7343-43 T494X686(M)025A(2) 17.0 8.0 0.3 742 668 297 1
25 68 D/7343-31 T494D686(M)025A(2) 17.0 10.0 0.5 548 493 219 1
25 100 X/7343-43 T494X107(M)025A(2) 25.0 8.0 0.25 812 731 325 1
35 0.1 A/3216-18 T494A104(1)035A(2) 0.5 4.0 10.0 87 78 35 1
35 0.15 A/3216-18 T494A154(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 0.22 A/3216-18 T494A224(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 0.33 A/3216-18 T494A334(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 0.47 B/3528-21 T494B474(1)035A(2) 0.5 4.0 2.5 184 166 74 1
35 0.47 A/3216-18 T494A474(1)035A(2) 0.5 4.0 4.0 137 123 55 1
35 0.68 B/3528-21 T494B684(1)035A(2) 0.5 4.0 2.5 184 166 74 1
35 0.68 A/3216-18 T494A684(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 1B/3528-21 T494B105(1)035A(2) 0.5 4.0 2.0 206 185 82 1
35 1A/3216-18 T494A105(1)035A(2) 0.5 4.0 6.0 112 101 45 1
35 1.5 A/3216-18 T494A155(1)035A(2) 0.5 6.0 4.0 137 123 55 1
35 1.5 C/6032-28 T494C155(1)035A(2) 0.5 6.0 2.5 210 189 84 1
35 1.5 B/3528-21 T494B155(1)035A(2) 0.5 6.0 3.0 168 151 67 1
35 2.2 A/3216-18 T494A225(1)035A(2) 0.8 6.0 3.0 158 142 63 1
35 2.2 C/6032-28 T494C225(1)035A(2) 0.8 6.0 1.5 271 244 108 1
35 2.2 B/3528-21 T494B225(1)035A(2) 0.8 6.0 2.5 184 166 74 1
35 3.3 C/6032-28 T494C335(1)035A(2) 1.2 6.0 0.8 371 334 148 1
35 3.3 B/3528-21 T494B335(1)035A(2) 1.2 6.0 1.3 256 230 102 1
35 4.7 B/3528-21 T494B475(1)035A(2) 1.6 6.0 1.5 238 214 95 1
35 4.7 D/7343-31 T494D475(1)035A(2) 1.6 6.0 0.7 463 417 185 1
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 15
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 1111
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
T494 T336 M004 A T
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Packaging (C-Spec)
T =
Tantalum
Industrial -
Low ESR
A, B, C, D,
E, S, T, U,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
G = Gold Plated (A, B,
C, D, X only)
Blank = 7" Reel
7280 = 13" Reel
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
35 4.7 C/6032-28 T494C475(1)035A(2) 1.6 6.0 0.7 396 356 158 1
35 6.8 D/7343-31 T494D685(1)035A(2) 2.4 6.0 0.5 548 493 219 1
35 6.8 C/6032-28 T494C685(1)035A(2) 2.4 6.0 0.9 350 315 140 1
35 10 D/7343-31 T494D106(1)035A(2) 3.5 6.0 0.4 612 551 245 1
35 10 C/6032-28 T494C106(M)035A(2) 3.5 6.0 1.2 303 273 121 1
35 10 V/7343-20 T494V106(1)035A(2) 3.5 6.0 0.8 395 356 158 1
35 15 X/7343-43 T494X156(1)035A(2) 5.3 6.0 0.30 742 668 297 1
35 15 D/7343-31 T494D156(1)035A(2) 5.3 6.0 0.35 655 590 262 1
35 22 X/7343-43 T494X226(1)035A(2) 7.7 6.0 0.3 742 668 297 1
35 22 D/7343-31 T494D226(1)035A(2) 7.7 6.0 0.4 612 551 245 1
35 33 D/7343-31 T494D336(1)035A(2) 11.6 6.0 0.6 500 450 200 1
35 33 X/7343-43 T494X336(1)035A(2) 11.6 6.0 0.6 524 472 210 1
35 47 X/7343-43 T494X476(1)035A(2) 16.5 8.0 0.5 574 517 230 1
35 47 E/7360-38 T494E476(1)035A(2) 16.5 10.0 0.3 816 734 326 1
50 0.1 A/3216-18 T494A104(1)050A(2) 0.5 4.0 10.0 87 78 35 1
50 0.15 A/3216-18 T494A154(1)050A(2) 0.5 4.0 10.0 87 78 35 1
50 0.22 A/3216-18 T494A224(1)050A(2) 0.5 4.0 12.0 79 71 32 1
50 0.22 B/3528-21 T494B224(1)050A(2) 0.5 4.0 10.0 92 83 37 1
50 0.33 A/3216-18 T494A334(1)050A(2) 0.5 4.0 9.0 91 82 36 1
50 0.33 B/3528-21 T494B334(1)050A(2) 0.5 4.0 2.5 184 166 74 1
50 0.47 A/3216-18 T494A474(1)050A(2) 0.5 4.0 6.0 112 101 45 1
50 0.47 C/6032-28 T494C474(1)050A(2) 0.5 4.0 1.8 247 222 99 1
50 0.47 B/3528-21 T494B474(1)050A(2) 0.5 4.0 2.0 206 185 82 1
50 0.68 A/3216-18 T494A684(1)050A(2) 0.5 4.0 5.0 122 110 49 1
50 0.68 C/6032-28 T494C684(1)050A(2) 0.5 4.0 1.6 262 236 105 1
50 0.68 B/3528-21 T494B684(1)050A(2) 0.5 4.0 3.0 168 151 67 1
50 1A/3216-18 T494A105(1)050A(2) 0.5 4.0 5.0 122 110 49 1
50 1C/6032-28 T494C105(1)050A(2) 0.5 4.0 1.6 262 236 105 1
50 1B/3528-21 T494B105(1)050A(2) 0.5 6.0 4.0 146 131 58 1
50 1V/7343-20 T494V105(M)050A(2) 0.5 4.0 4.0 177 159 71 1
50 1.5 D/7343-31 T494D155(1)050A(2) 0.8 6.0 1.0 387 348 155 1
50 1.5 C/6032-28 T494C155(1)050A(2) 0.8 6.0 1.5 271 244 108 1
50 2.2 D/7343-31 T494D225(1)050A(2) 1.1 6.0 0.8 433 390 173 1
50 2.2 C/6032-28 T494C225(1)050A(2) 1.1 6.0 1.5 271 244 108 1
50 3.3 D/7343-31 T494D335(1)050A(2) 1.7 6.0 0.8 433 390 173 1
50 4.7 D/7343-31 T494D475(1)050A(2) 2.4 6.0 0.6 500 450 200 1
50 6.8 X/7343-43 T494X685(1)050A(2) 3.4 6.0 0.5 574 517 230 1
50 6.8 D/7343-31 T494D685(1)050A(2) 3.4 6.0 0.7 463 417 185 1
50 10 X/7343-43 T494X106(M)050A(2) 5.0 6.0 0.4 642 578 257 1
50 10 D/7343-31 T494D106(1)050A(2) 5.0 6.0 0.7 463 417 185 1
50 15 X/7343-43 T494X156(1)050A(2) 7.5 6.0 0.4 642 578 257 1
50 22 X/7343-43 T494X226(1)050A(2) 11.0 10.0 0.5 574 517 230 1
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
35 4.7 C/6032-28 T494C475(1)035A(2) 1.6 6.0 0.7 396 356 158 1
35 6.8 D/7343-31 T494D685(1)035A(2) 2.4 6.0 0.5 548 493 219 1
35 6.8 C/6032-28 T494C685(1)035A(2) 2.4 6.0 0.9 350 315 140 1
35 10 D/7343-31 T494D106(1)035A(2) 3.5 6.0 0.4 612 551 245 1
35 10 C/6032-28 T494C106(M)035A(2) 3.5 6.0 1.2 303 273 121 1
35 10 V/7343-20 T494V106(1)035A(2) 3.5 6.0 0.8 395 356 158 1
35 15 X/7343-43 T494X156(1)035A(2) 5.3 6.0 0.30 742 668 297 1
35 15 D/7343-31 T494D156(1)035A(2) 5.3 6.0 0.35 655 590 262 1
35 22 X/7343-43 T494X226(1)035A(2) 7.7 6.0 0.3 742 668 297 1
35 22 D/7343-31 T494D226(1)035A(2) 7.7 6.0 0.4 612 551 245 1
35 33 D/7343-31 T494D336(1)035A(2) 11.6 6.0 0.6 500 450 200 1
35 33 X/7343-43 T494X336(1)035A(2) 11.6 6.0 0.6 524 472 210 1
35 47 X/7343-43 T494X476(1)035A(2) 16.5 8.0 0.5 574 517 230 1
35 47 E/7360-38 T494E476(1)035A(2) 16.5 10.0 0.3 816 734 326 1
50 0.1 A/3216-18 T494A104(1)050A(2) 0.5 4.0 10.0 87 78 35 1
50 0.15 A/3216-18 T494A154(1)050A(2) 0.5 4.0 10.0 87 78 35 1
50 0.22 A/3216-18 T494A224(1)050A(2) 0.5 4.0 12.0 79 71 32 1
50 0.22 B/3528-21 T494B224(1)050A(2) 0.5 4.0 10.0 92 83 37 1
50 0.33 A/3216-18 T494A334(1)050A(2) 0.5 4.0 9.0 91 82 36 1
50 0.33 B/3528-21 T494B334(1)050A(2) 0.5 4.0 2.5 184 166 74 1
50 0.47 A/3216-18 T494A474(1)050A(2) 0.5 4.0 6.0 112 101 45 1
50 0.47 C/6032-28 T494C474(1)050A(2) 0.5 4.0 1.8 247 222 99 1
50 0.47 B/3528-21 T494B474(1)050A(2) 0.5 4.0 2.0 206 185 82 1
50 0.68 A/3216-18 T494A684(1)050A(2) 0.5 4.0 5.0 122 110 49 1
50 0.68 C/6032-28 T494C684(1)050A(2) 0.5 4.0 1.6 262 236 105 1
50 0.68 B/3528-21 T494B684(1)050A(2) 0.5 4.0 3.0 168 151 67 1
50 1A/3216-18 T494A105(1)050A(2) 0.5 4.0 5.0 122 110 49 1
50 1C/6032-28 T494C105(1)050A(2) 0.5 4.0 1.6 262 236 105 1
50 1B/3528-21 T494B105(1)050A(2) 0.5 6.0 4.0 146 131 58 1
50 1V/7343-20 T494V105(M)050A(2) 0.5 4.0 4.0 177 159 71 1
50 1.5 D/7343-31 T494D155(1)050A(2) 0.8 6.0 1.0 387 348 155 1
50 1.5 C/6032-28 T494C155(1)050A(2) 0.8 6.0 1.5 271 244 108 1
50 2.2 D/7343-31 T494D225(1)050A(2) 1.1 6.0 0.8 433 390 173 1
50 2.2 C/6032-28 T494C225(1)050A(2) 1.1 6.0 1.5 271 244 108 1
50 3.3 D/7343-31 T494D335(1)050A(2) 1.7 6.0 0.8 433 390 173 1
50 4.7 D/7343-31 T494D475(1)050A(2) 2.4 6.0 0.6 500 450 200 1
50 6.8 X/7343-43 T494X685(1)050A(2) 3.4 6.0 0.5 574 517 230 1
50 6.8 D/7343-31 T494D685(1)050A(2) 3.4 6.0 0.7 463 417 185 1
50 10 X/7343-43 T494X106(M)050A(2) 5.0 6.0 0.4 642 578 257 1
50 10 D/7343-31 T494D106(1)050A(2) 5.0 6.0 0.7 463 417 185 1
50 15 X/7343-43 T494X156(1)050A(2) 7.5 6.0 0.4 642 578 257 1
50 22 X/7343-43 T494X226(1)050A(2) 11.0 10.0 0.5 574 517 230 1
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
85ºC
(mA) 100 kHz
125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 16
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 1212
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
Recommended Voltage Derating Guidelines
-55°C to 85°C 85°C to 125°C
% Change in Working DC
Voltage with Temperature
VR67% of VR
Recommended Maximum
Application Voltage
50% of VR33% of VR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C
85°C
12C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
3216–18
75
B
352821
85
C
6032–28
110
D
734331
150
X
734343
165
E
7360–38
200
S
3216–12
60
T
3528–12
70
U
6032–15
90
V
7343–20
125
T510X
734343
270
T510E
7360–38
285
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 17
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 1313
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identifi ed on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
12C
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 18
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 1414
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profi le
conditions for convection and IR refl ow refl ect the profi le conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three refl ow
passes at these conditions.
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (T
Smax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 19
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2008_T494 8/5/2013 1515
Tantalum Surface Mount Capacitors – Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T494 Industrial Grade Low ESR MnO2 Series
Capacitor Marking
KEMET
Industrial
Grade Low
ESR MnO2
Rated
Voltage
156
25 K
230
Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1
st
digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fl uctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 20
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1
One world. One KEMET
Bene ts
Meets or exceeds EIA Standard 535BAAC
Taped and reeled per EIA 481–1
High surge current capability
Optional gold-plated terminations
High ripple current capability
100% surge current test on C, D, E, U, V, X sizes
100% steady-state accelerated aging
Capacitance values of 0.1 μF to 1,000 μF
Tolerances of ±10% and ±20%
Voltage rating of 2.5 – 50 VDC
Extended range values
Available tested to DSCC 95158
RoHS Compliant and lead-free terminations
Operating temperature range of -55˚C to +125˚C
Applications
Typical applications include decoupling and fi ltering in industrial
and automotive end applications, such as DC/DC converters,
portable electronics, telecommunications, and control units
requiring high ripple current capability.
Overview
The low ESR, surge-robust T495 Series is designed for
demanding applications that require high surge current and
high ripple current capability. This series builds upon the proven
capabilities of our industrial grade tantalum chip capacitors
to offer several advantages such as low ESR, high ripple
current capability, excellent capacitance stability, and improved
resistance to high in-rush currents. These benefi ts are achieved
though a combination of proprietary design, materials, and process
parameters as well as high-stress, low impedance electrical
conditioning performed prior to screening.
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T495 Surge Robust Low ESR MnO2 Series
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 21
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 22
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Ordering Information
T495 X107 M010 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 0.47 – 1,000 µF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 2.5 – 50 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 22
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 33
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Quali cation
Test Condition Characteristics
Endurance 85°C @ rated voltage, 2,000 hours.
125°C @ 2/3 rated voltage, 2,000 hours.
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C @ 0 volts, 2,000 hours.
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MILSTD–202, Method 107, Condition B, mounted, -55C° to
125° C, 1,000 cycles.
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +125ºC, +25ºC.
+2C -55°C +85°C +125°C
Δ C/C IL* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage).
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 23
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 44
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Electrical Characteristics
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (μF)
Frequency (Hz)
T495C476M016ATE350
T495D157M016ATE085
T495X227M016ATE100
Capacitance vs. Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T495C476M016ATE350_IMP
T495D157M016ATE085_IMP
T495X227M016ATE100_IMP
T495C476M016ATE350_ESR
T495D157M016ATE085_ESR
T495X227M016ATE100_ESR
ESR vs. Frequency
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216–18
3.2 ± 0.2
(.126 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.6 ± 0.2
(.063 ± .008) 1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
B352821
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.9 ± 0.2
(.075 ± .008) 2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
C6032–28
6.0 ± 0.3
(.236 ± .03)
3.2 ± 0.3
(.126 ± .012)
2.5 ± 0.3
(.098 ± .012) 2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
D734331
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(.110 ± .012) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.0 ± 0.3
(.157 ± .012) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
E7360–38
7.3 ± 0.3
(.287 ± .012)
6.0± 0.3
(.236 ± .012)
3.6 ± 0.2
(.142 ± .008) 4.1 (.161) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
T3528–12
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008) 1.2 (.047) 2.2 (.087) 0.8 (.031) N/A 0.05 (.002) N/A N/A 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
V7343–20
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.0 (.079) 2.4 (.094) 1.3 (.051) N/A 0.05 (.002) N/A N/A 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 24
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 55
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
2.5 100 T/3528-12 T495T107(M)2R5A(2)E3K0 2.5 24.0 3000 153 138 61 1
2.5 220 D/7343-31 T495D227(1)2R5A(2)E045 5.5 8.0 45 1826 1643 730 1
2.5 470 D/7343-31 T495D477(1)2R5A(2)E035 11.8 8.0 35 2070 1863 828 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E030 25.0 15.0 30 2345 2111 938 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E040 25.0 15.0 40 2031 1828 812 1
46.8 A/3216-18 T495A685(1)004A(2)E2K0 0.5 6.0 2000 194 175 78 1
422 C/6032-28 T495C226(1)004A(2)E380 0.9 6.0 380 538 484 215 1
468 T/3528-12 T495T686(1)004A(2)E1K5 2.7 20.0 1500 216 194 86 1
468 V/7343-20 T495V686(1)004A(2)E150 2.7 6.0 150 913 822 365 1
4100 B/3528-21 T495B107(1)004A(2)E500 4.0 8.0 500 412 371 165 1
4100 D/7343-31 T495D107(1)004A(2)E800 4.0 6.0 800 433 390 173 1
4150 B/3528-21 T495B157(M)004A(2)E900 6.0 12.0 900 307 276 123 1
4150 C/6032-28 T495C157(1)004A(2)E070 6.0 12.0 70 1254 1129 502 1
4150 C/6032-28 T495C157(1)004A(2)E250 6.0 8.0 250 663 597 265 1
4220 D/7343-31 T495D227(1)004A(2)E040 8.8 8.0 40 1936 1742 774 1
4220 D/7343-31 T495D227(1)004A(2)E050 8.8 8.0 50 1732 1559 693 1
4220 D/7343-31 T495D227(1)004A(2)E100 8.8 8.0 100 1225 1103 490 1
4330 C/6032-28 T495C337(1)004A(2)E300 13.2 10.0 300 606 545 242 1
4330 C/6032-28 T495C337(1)004A(2)E700 13.2 12.0 700 396 356 158 1
4330 D/7343-31 T495D337(1)004A(2)E030 13.2 8.0 30 2236 2012 894 1
4330 D/7343-31 T495D337(1)004A(2)E045 13.2 8.0 45 1826 1643 730 1
4330 D/7343-31 T495D337(1)004A(2)E100 13.2 8.0 100 1225 1103 490 1
4470 D/7343-31 T495D477(1)004A(2)E045 18.8 12.0 45 1826 1643 730 1
4470 D/7343-31 T495D477(1)004A(2)E100 18.8 12.0 100 1225 1103 490 1
4470 X/7343-43 T495X477(1)004A(2)E030 18.8 8.0 30 2345 2111 938 1
4470 X/7343-43 T495X477(1)004A(2)E045 18.8 8.0 45 1915 1724 766 1
4470 X/7343-43 T495X477(1)004A(2)E060 18.8 10.0 60 1658 1492 663 1
4470 X/7343-43 T495X477(1)004A(2)E100 18.8 8.0 100 1285 1157 514 1
4680 X/7343-43 T495X687(1)004A(2)E040 27.2 10.0 40 2031 1828 812 1
4680 X/7343-43 T495X687(1)004A(2)E060 27.2 10.0 60 1658 1492 663 1
4680 X/7343-43 T495X687(1)004A(2)E100 27. 2 10.0 100 1285 1157 514 1
41000 X/7343-43 T495X108(1)004A(2)E030 40.0 12.0 30 2345 2111 938 1
41000 X/7343-43 T495X108(1)004A(2)E040 40.0 12.0 40 2031 1828 812 1
41000 X/7343-43 T495X108(1)004A(2)E060 40.0 12.0 60 1658 1492 663 1
41000 X/7343-43 T495X108(1)004A(2)E070 40.0 12.0 70 1535 1382 614 1
41000 X/7343-43 T495X108(1)004A(2)E090 40.0 12.0 90 1354 1219 542 1
41000 X/7343-43 T495X108(1)004A(2)E100 40.0 12.0 100 1285 1157 514 1
41000 E/7360-38 T495E108(1)004A(2)E035 40.0 15.0 35 2390 2151 956 1
41000 E/7360-38 T495E108(1)004A(2)E050 40.0 15.0 50 2000 1800 800 1
6.3 6.8 A/3216-18 T495A685(1)006ATE1K8 0.5 6.0 1800 204 184 82 1
6.3 6.8 A/3216-18 T495A685(1)006ATE2K0 0.5 6.0 2000 194 175 78 1
6.3 6.8 A/3216-18 T495A685(1)006A(2)E4K5 0.5 6.0 4500 129 116 52 1
6.3 6.8 C/6032-28 T495C685(1)006A(2)E480 0.5 6.0 480 479 431 192 1
6.3 10 A/3216-18 T495A106(1)006A(2)E800 0.6 6.0 800 306 275 122 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K0 0.6 6.0 1000 274 247 110 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K5 0.6 6.0 1500 224 202 90 1
6.3 10 A/3216-18 T495A106(1)006A(2)E2K0 0.6 6.0 2000 194 175 78 1
6.3 22 A/3216-18 T495A226(1)006A(2)E500 1.4 6.0 500 387 348 155 1
6.3 22 C/6032-28 T495C226(1)006A(2)E380 1.4 6.0 380 538 484 215 1
6.3 33 A/3216-18 T495A336(1)006A(2)E600 2.1 12.0 600 354 319 142 1
6.3 47 B/3528-21 T495B476(1)006A(2)E250 3.0 6.0 250 583 525 233 1
6.3 47 B/3528-22 T495B476(1)006A(2)E500 3.0 6.0 500 583 525 233 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
2.5 100 T/3528-12 T495T107(M)2R5A(2)E3K0 2.5 24.0 3000 153 138 61 1
2.5 220 D/7343-31 T495D227(1)2R5A(2)E045 5.5 8.0 45 1826 1643 730 1
2.5 470 D/7343-31 T495D477(1)2R5A(2)E035 11.8 8.0 35 2070 1863 828 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E030 25.0 15.0 30 2345 2111 938 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E040 25.0 15.0 40 2031 1828 812 1
46.8 A/3216-18 T495A685(1)004A(2)E2K0 0.5 6.0 2000 194 175 78 1
422 C/6032-28 T495C226(1)004A(2)E380 0.9 6.0 380 538 484 215 1
468 T/3528-12 T495T686(1)004A(2)E1K5 2.7 20.0 1500 216 194 86 1
468 V/7343-20 T495V686(1)004A(2)E150 2.7 6.0 150 913 822 365 1
4100 B/3528-21 T495B107(1)004A(2)E500 4.0 8.0 500 412 371 165 1
4100 D/7343-31 T495D107(1)004A(2)E800 4.0 6.0 800 433 390 173 1
4150 B/3528-21 T495B157(M)004A(2)E900 6.0 12.0 900 307 276 123 1
4150 C/6032-28 T495C157(1)004A(2)E070 6.0 12.0 70 1254 1129 502 1
4150 C/6032-28 T495C157(1)004A(2)E250 6.0 8.0 250 663 597 265 1
4220 D/7343-31 T495D227(1)004A(2)E040 8.8 8.0 40 1936 1742 774 1
4220 D/7343-31 T495D227(1)004A(2)E050 8.8 8.0 50 1732 1559 693 1
4220 D/7343-31 T495D227(1)004A(2)E100 8.8 8.0 100 1225 1103 490 1
4330 C/6032-28 T495C337(1)004A(2)E300 13.2 10.0 300 606 545 242 1
4330 C/6032-28 T495C337(1)004A(2)E700 13.2 12.0 700 396 356 158 1
4330 D/7343-31 T495D337(1)004A(2)E030 13.2 8.0 30 2236 2012 894 1
4330 D/7343-31 T495D337(1)004A(2)E045 13.2 8.0 45 1826 1643 730 1
4330 D/7343-31 T495D337(1)004A(2)E100 13.2 8.0 100 1225 1103 490 1
4470 D/7343-31 T495D477(1)004A(2)E045 18.8 12.0 45 1826 1643 730 1
4470 D/7343-31 T495D477(1)004A(2)E100 18.8 12.0 100 1225 1103 490 1
4470 X/7343-43 T495X477(1)004A(2)E030 18.8 8.0 30 2345 2111 938 1
4470 X/7343-43 T495X477(1)004A(2)E045 18.8 8.0 45 1915 1724 766 1
4470 X/7343-43 T495X477(1)004A(2)E060 18.8 10.0 60 1658 1492 663 1
4470 X/7343-43 T495X477(1)004A(2)E100 18.8 8.0 100 1285 1157 514 1
4680 X/7343-43 T495X687(1)004A(2)E040 27.2 10.0 40 2031 1828 812 1
4680 X/7343-43 T495X687(1)004A(2)E060 27.2 10.0 60 1658 1492 663 1
4680 X/7343-43 T495X687(1)004A(2)E100 27. 2 10.0 100 1285 1157 514 1
41000 X/7343-43 T495X108(1)004A(2)E030 40.0 12.0 30 2345 2111 938 1
41000 X/7343-43 T495X108(1)004A(2)E040 40.0 12.0 40 2031 1828 812 1
41000 X/7343-43 T495X108(1)004A(2)E060 40.0 12.0 60 1658 1492 663 1
41000 X/7343-43 T495X108(1)004A(2)E070 40.0 12.0 70 1535 1382 614 1
41000 X/7343-43 T495X108(1)004A(2)E090 40.0 12.0 90 1354 1219 542 1
41000 X/7343-43 T495X108(1)004A(2)E100 40.0 12.0 100 1285 1157 514 1
41000 E/7360-38 T495E108(1)004A(2)E035 40.0 15.0 35 2390 2151 956 1
41000 E/7360-38 T495E108(1)004A(2)E050 40.0 15.0 50 2000 1800 800 1
6.3 6.8 A/3216-18 T495A685(1)006ATE1K8 0.5 6.0 1800 204 184 82 1
6.3 6.8 A/3216-18 T495A685(1)006ATE2K0 0.5 6.0 2000 194 175 78 1
6.3 6.8 A/3216-18 T495A685(1)006A(2)E4K5 0.5 6.0 4500 129 116 52 1
6.3 6.8 C/6032-28 T495C685(1)006A(2)E480 0.5 6.0 480 479 431 192 1
6.3 10 A/3216-18 T495A106(1)006A(2)E800 0.6 6.0 800 306 275 122 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K0 0.6 6.0 1000 274 247 110 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K5 0.6 6.0 1500 224 202 90 1
6.3 10 A/3216-18 T495A106(1)006A(2)E2K0 0.6 6.0 2000 194 175 78 1
6.3 22 A/3216-18 T495A226(1)006A(2)E500 1.4 6.0 500 387 348 155 1
6.3 22 C/6032-28 T495C226(1)006A(2)E380 1.4 6.0 380 538 484 215 1
6.3 33 A/3216-18 T495A336(1)006A(2)E600 2.1 12.0 600 354 319 142 1
6.3 47 B/3528-21 T495B476(1)006A(2)E250 3.0 6.0 250 583 525 233 1
6.3 47 B/3528-22 T495B476(1)006A(2)E500 3.0 6.0 500 583 525 233 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 25
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 66
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
6.3 47 B/3528-21 T495B476(1)006A(2)E450 3.0 6.0 450 435 392 174 1
6.3 47 B/3528-21 T495B476(1)006A(2)E400 3.0 6.0 400 461 415 184 1
6.3 47 C/6032-28 T495C476(1)006A(2)E250 3.0 6.0 250 663 597 265 1
6.3 47 C/6032-28 T495C476(1)006A(2)E300 3.0 6.0 300 606 545 242 1
6.3 47 C/6032-28 T495C476(1)006A(2)E330 3.0 6.0 330 577 519 231 1
6.3 47 V/7343-20 T495V476(1)006A(2)E150 3.0 6.0 150 913 822 365 1
6.3 68 B/3528-21 T495B686(1)006A(2)E500 4.3 8.0 500 412 371 165 1
6.3 68 D/7343-31 T495D686(1)006A(2)E175 4.3 4.0 175 926 833 370 1
6.3 68 D/7343-31 T495D686(1)006A(2)E180 4.3 4.0 180 913 822 365 1
6.3 68 D/7343-31 T495D686(1)006A(2)4095 4.3 4.0 175 926 833 370 1
6.3 100 B/3528-21 T495B107(1)006A(2)E400 6.3 15.0 400 461 415 184 1
6.3 100 B/3528-21 T495B107(M)006A(2)E700 6.3 15.0 700 348 313 139 1
6.3 100 C/6032-28 T495C107(1)006A(2)E075 6.3 8.0 75 1211 1090 484 1
6.3 100 C/6032-28 T495C107(1)006A(2)E150 6.3 8.0 150 856 770 342 1
6.3 100 D/7343-31 T495D107(1)006A(2)E050 6.3 6.0 50 1732 1559 693 1
6.3 100 D/7343-31 T495D107(1)006A(2)E130 6.3 6.0 130 1074 967 430 1
6.3 100 D/7343-31 T495D107(1)006A(2)E150 6.3 8.0 150 1000 900 400 1
6.3 100 D/7343-31 T495D107(1)006A(2)E800 6.3 6.0 800 433 390 173 1
6.3 100 V/7343-20 T495V107(1)006A(2)E090 6.3 8.0 90 1179 1061 472 1
6.3 100 V/7343-20 T495V107(1)006A(2)E150 6.3 8.0 150 913 822 365 1
6.3 150 C/6032-28 T495C157(1)006A(2)E050 9.5 8.0 50 1483 1335 593 1
6.3 150 C/6032-28 T495C157(M)006A(2)E200 9.5 8.0 200 742 668 297 1
6.3 150 V/7343-20 T495V157(1)006A(2)E040 9.5 8.0 40 1768 1591 707 1
6.3 150 V/7343-20 T495V157(1)006A(2)E070 9.5 8.0 70 1336 1202 534 1
6.3 150 V/7343-20 T495V157(1)006A(2)E150 9.5 8.0 150 913 822 365 1
6.3 150 D/7343-31 T495D157(1)006A(2)E050 9.5 6.0 50 1732 1559 693 1
6.3 150 D/7343-31 T495D157(1)006A(2)E065 9.5 6.0 65 1519 1367 608 1
6.3 150 D/7343-31 T495D157(1)006A(2)E080 9.5 6.0 80 1369 1232 548 1
6.3 150 D/7343-31 T495D157(1)006A(2)E100 9.5 6.0 100 1225 1103 490 1
6.3 150 D/7343-31 T495D157(1)006A(2)E125 9.5 6.0 125 1095 986 438 1
6.3 150 X/7343-43 T495X157(1)006A(2)E100 9.5 6.0 100 1285 1157 514 1
6.3 150 X/7343-43 T495X157(1)006A(2)4095 9.5 6.0 125 1149 1034 460 1
6.3 220 C/6032-28 T495C227(1)006A(2)E225 13.9 10.0 225 699 629 280 1
6.3 220 D/7343-31 T495D227(1)006A(2)E045 13.9 8.0 45 1826 1643 730 1
6.3 220 D/7343-31 T495D227(1)006A(2)E050 13.9 8.0 50 1732 1559 693 1
6.3 220 D/7343-31 T495D227(1)006A(2)E100 13.9 8.0 100 1225 1103 490 1
6.3 220 D/7343-31 T495D227(1)006A(2)4095 13.9 8.0 100 1225 1103 490 1
6.3 220 X/7343-43 T495X227(1)006A(2)E070 13.9 8.0 70 1535 1382 614 1
6.3 220 X/7343-43 T495X227(1)006A(2)E080 13.9 8.0 80 1436 1292 574 1
6.3 220 X/7343-43 T495X227(1)006A(2)E100 13.9 8.0 100 1285 1157 514 1
6.3 220 V/7343-20 T495V227(1)006ATE150 13.9 8.0 150 913 822 365 1
6.3 220 X/7343-43 T495X227(1)006A(2)4095 13.9 8.0 100 1285 1157 514 1
6.3 330 D/7343-31 T495D337(1)006A(2)E040 20.8 8.0 40 1936 1742 774 1
6.3 330 D/7343-31 T495D337(1)006A(2)E045 20.8 8.0 45 1826 1643 730 1
6.3 330 D/7343-31 T495D337(1)006A(2)E050 20.8 8.0 50 1732 1559 693 1
6.3 330 D/7343-31 T495D337(1)006A(2)E070 20.8 8.0 70 1464 1318 586 1
6.3 330 D/7343-31 T495D337(1)006A(2)E100 20.8 8.0 100 1225 1103 490 1
6.3 330 X/7343-43 T495X337(1)006A(2)E045 20.8 8.0 45 1915 1724 766 1
6.3 330 X/7343-43 T495X337(1)006A(2)E050 20.8 8.0 50 1817 1635 727 1
6.3 330 X/7343-43 T495X337(1)006A(2)E065 20.8 8.0 65 1593 1434 637 1
6.3 330 X/7343-43 T495X337(1)006A(2)E080 20.8 8.0 80 1436 1292 574 1
6.3 330 X/7343-43 T495X337(1)006A(2)E100 20.8 8.0 100 1285 1157 514 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
6.3 47 B/3528-21 T495B476(1)006A(2)E450 3.0 6.0 450 435 392 174 1
6.3 47 B/3528-21 T495B476(1)006A(2)E400 3.0 6.0 400 461 415 184 1
6.3 47 C/6032-28 T495C476(1)006A(2)E250 3.0 6.0 250 663 597 265 1
6.3 47 C/6032-28 T495C476(1)006A(2)E300 3.0 6.0 300 606 545 242 1
6.3 47 C/6032-28 T495C476(1)006A(2)E330 3.0 6.0 330 577 519 231 1
6.3 47 V/7343-20 T495V476(1)006A(2)E150 3.0 6.0 150 913 822 365 1
6.3 68 B/3528-21 T495B686(1)006A(2)E500 4.3 8.0 500 412 371 165 1
6.3 68 D/7343-31 T495D686(1)006A(2)E175 4.3 4.0 175 926 833 370 1
6.3 68 D/7343-31 T495D686(1)006A(2)E180 4.3 4.0 180 913 822 365 1
6.3 68 D/7343-31 T495D686(1)006A(2)4095 4.3 4.0 175 926 833 370 1
6.3 100 B/3528-21 T495B107(1)006A(2)E400 6.3 15.0 400 461 415 184 1
6.3 100 B/3528-21 T495B107(M)006A(2)E700 6.3 15.0 700 348 313 139 1
6.3 100 C/6032-28 T495C107(1)006A(2)E075 6.3 8.0 75 1211 1090 484 1
6.3 100 C/6032-28 T495C107(1)006A(2)E150 6.3 8.0 150 856 770 342 1
6.3 100 D/7343-31 T495D107(1)006A(2)E050 6.3 6.0 50 1732 1559 693 1
6.3 100 D/7343-31 T495D107(1)006A(2)E130 6.3 6.0 130 1074 967 430 1
6.3 100 D/7343-31 T495D107(1)006A(2)E150 6.3 8.0 150 1000 900 400 1
6.3 100 D/7343-31 T495D107(1)006A(2)E800 6.3 6.0 800 433 390 173 1
6.3 100 V/7343-20 T495V107(1)006A(2)E090 6.3 8.0 90 1179 1061 472 1
6.3 100 V/7343-20 T495V107(1)006A(2)E150 6.3 8.0 150 913 822 365 1
6.3 150 C/6032-28 T495C157(1)006A(2)E050 9.5 8.0 50 1483 1335 593 1
6.3 150 C/6032-28 T495C157(M)006A(2)E200 9.5 8.0 200 742 668 297 1
6.3 150 V/7343-20 T495V157(1)006A(2)E040 9.5 8.0 40 1768 1591 707 1
6.3 150 V/7343-20 T495V157(1)006A(2)E070 9.5 8.0 70 1336 1202 534 1
6.3 150 V/7343-20 T495V157(1)006A(2)E150 9.5 8.0 150 913 822 365 1
6.3 150 D/7343-31 T495D157(1)006A(2)E050 9.5 6.0 50 1732 1559 693 1
6.3 150 D/7343-31 T495D157(1)006A(2)E065 9.5 6.0 65 1519 1367 608 1
6.3 150 D/7343-31 T495D157(1)006A(2)E080 9.5 6.0 80 1369 1232 548 1
6.3 150 D/7343-31 T495D157(1)006A(2)E100 9.5 6.0 100 1225 1103 490 1
6.3 150 D/7343-31 T495D157(1)006A(2)E125 9.5 6.0 125 1095 986 438 1
6.3 150 X/7343-43 T495X157(1)006A(2)E100 9.5 6.0 100 1285 1157 514 1
6.3 150 X/7343-43 T495X157(1)006A(2)4095 9.5 6.0 125 1149 1034 460 1
6.3 220 C/6032-28 T495C227(1)006A(2)E225 13.9 10.0 225 699 629 280 1
6.3 220 D/7343-31 T495D227(1)006A(2)E045 13.9 8.0 45 1826 1643 730 1
6.3 220 D/7343-31 T495D227(1)006A(2)E050 13.9 8.0 50 1732 1559 693 1
6.3 220 D/7343-31 T495D227(1)006A(2)E100 13.9 8.0 100 1225 1103 490 1
6.3 220 D/7343-31 T495D227(1)006A(2)4095 13.9 8.0 100 1225 1103 490 1
6.3 220 X/7343-43 T495X227(1)006A(2)E070 13.9 8.0 70 1535 1382 614 1
6.3 220 X/7343-43 T495X227(1)006A(2)E080 13.9 8.0 80 1436 1292 574 1
6.3 220 X/7343-43 T495X227(1)006A(2)E100 13.9 8.0 100 1285 1157 514 1
6.3 220 V/7343-20 T495V227(1)006ATE150 13.9 8.0 150 913 822 365 1
6.3 220 X/7343-43 T495X227(1)006A(2)4095 13.9 8.0 100 1285 1157 514 1
6.3 330 D/7343-31 T495D337(1)006A(2)E040 20.8 8.0 40 1936 1742 774 1
6.3 330 D/7343-31 T495D337(1)006A(2)E045 20.8 8.0 45 1826 1643 730 1
6.3 330 D/7343-31 T495D337(1)006A(2)E050 20.8 8.0 50 1732 1559 693 1
6.3 330 D/7343-31 T495D337(1)006A(2)E070 20.8 8.0 70 1464 1318 586 1
6.3 330 D/7343-31 T495D337(1)006A(2)E100 20.8 8.0 100 1225 1103 490 1
6.3 330 X/7343-43 T495X337(1)006A(2)E045 20.8 8.0 45 1915 1724 766 1
6.3 330 X/7343-43 T495X337(1)006A(2)E050 20.8 8.0 50 1817 1635 727 1
6.3 330 X/7343-43 T495X337(1)006A(2)E065 20.8 8.0 65 1593 1434 637 1
6.3 330 X/7343-43 T495X337(1)006A(2)E080 20.8 8.0 80 1436 1292 574 1
6.3 330 X/7343-43 T495X337(1)006A(2)E100 20.8 8.0 100 1285 1157 514 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 26
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 77
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
6.3 330 E/7360-38 T495E337(1)006A(2)E060 20.8 8.0 60 1826 1643 730 1
6.3 330 E/7360-38 T495E337(1)006A(2)E100 20.8 8.0 100 1414 1273 566 1
6.3 470 D/7343-31 T495D477(M)006A(2)E045 29.6 12.0 45 1826 1643 730 1
6.3 470 D/7343-31 T495D477(1)006A(2)E100 29.6 12.0 100 1225 1103 490 1
6.3 470 D/7343-31 T495D477(1)006A(2)E125 29.6 12.0 125 1095 986 438 1
6.3 470 D/7343-31 T495D477(1)006A(2)E150 29.6 12.0 150 1000 900 400 1
6.3 470 X/7343-43 T495X477(1)006A(2)E030 29.6 10.0 30 2345 2111 938 1
6.3 470 X/7343-43 T495X477(1)006A(2)E045 29.6 10.0 45 1915 1724 766 1
6.3 470 X/7343-43 T495X477(1)006A(2)E050 29.6 10.0 50 1817 1635 727 1
6.3 470 X/7343-43 T495X477(1)006A(2)E060 29.6 10.0 60 1658 1492 663 1
6.3 470 X/7343-43 T495X477(1)006A(2)E065 29.6 10.0 65 1593 1434 637 1
6.3 470 X/7343-43 T495X477(1)006A(2)E100 29.6 10.0 100 1285 1157 514 1
6.3 470 X/7343-43 T495X477(1)006A(2)E125 29.6 10.0 125 1149 1034 460 1
6.3 470 E/7360-38 T495E477(1)006A(2)E040 29.6 12.0 40 2236 2012 894 1
6.3 470 E/7360-38 T495E477(1)006A(2)E055 29.6 10.0 55 1907 1716 763 1
6.3 470 E/7360-38 T495E477(1)006A(2)E100 29.6 10.0 100 1414 1273 566 1
6.3 680 X/7343-43 T495X687(1)006A(2)E100 42.8 12.0 100 1285 1157 514 1
6.3 680 X/7343-43 T495X687(1)006A(2)E060 42.8 12.0 60 1658 1492 663 1
6.3 680 X/7343-43 T495X687(1)006A(2)E045 42.8 12.0 45 1915 1724 766 1
6.3 1000 E/7360-38 T495E108(1)006A(2)E050 63.0 15.0 50 2000 1800 800 1
10 2.2 A/3216-18 T495A225(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K2 0.5 6.0 1200 250 225 100 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K3 0.5 6.0 1300 240 216 96 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K4 0.5 6.0 1400 231 208 92 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 1
10 4.7 A/3216-18 T495A475(1)010A(2)E2K0 0.5 6.0 2000 194 175 78 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K3 0.5 15.0 1300 256 230 102 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K5 0.5 6.0 1500 238 214 95 1
10 6.8 A/3216-18 T495A685(1)010A(2)E1K8 0.7 6.0 1800 204 184 82 1
10 6.8 B/3528-21 T495B685(1)010A(2)E900 0.7 6.0 900 307 276 123 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K1 0.7 6.0 1100 278 250 111 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K2 0.7 6.0 1200 266 239 106 1
10 10 A/3216-18 T495A106(1)010A(2)E1K8 1.0 6.0 1800 204 184 82 1
10 10 A/3216-18 T495A106(1)010A(2) E2K0 1.0 6.0 2000 194 175 78 1
10 10 A/3216-18 T495A106(1)010A(2) E2K5 1.0 6.0 2500 173 156 69 1
10 10 A/3216-18 T495A106(1)010A(2) E3K8 1.0 6.0 3800 140 126 56 1
10 10 B/3528-21 T495B106(1)010A E600
T495B106(1)010A(2) E600 1.0 6.0 600 376 338 150 1
10 10 B/3528-21 T495B106(1)010A(2)E750 1.0 6.0 750 337 303 135 1
10 10 B/3528-21 T495B106(1)010A E1K2
T495B106(1)010A(2) E1K2 1.0 6.0 1200 266 239 106 1
10 10 B/3528-21 T495B106(1)010A(2)E3K0 1.0 6.0 3000 168 151 67 1
10 10 C/6032-28 T495C106(1)010AT E400 1.0 6.0 400 524 472 210 1
10 10 T/3528-12 T495T106(1)010AT E1K5 1.0 6.0 1500 216 194 86 1
10 15 A/3216-18 T495A156(1)010AT E1K0 1.5 6.0 1000 274 247 110 1
10 15 A/3216-18 T495A156(1)010AT E1K8 1.5 6.0 1800 204 184 82 1
10 15 B/3528-21 T495B156(1)010AT E600 1.5 6.0 600 376 338 150 1
10 15 B/3528-21 T495B156(1)010AT E900 1.5 6.0 900 307 276 123 1
10 15 T/3528-12 T495T156(1)010AT E1K2 1.5 6.0 1200 242 218 97 1
10 15 B/3528-21 T495B156(1)010A(2)E500 1.5 6.0 500 412 371 165 1
10 15 C/6032-28 T495C156(1)010A(2)E375 1.5 6.0 375 542 488 217 1
10 15 C/6032-28 T495C156(1)010A(2)E400 1.5 6.0 400 524 472 210 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
6.3 330 E/7360-38 T495E337(1)006A(2)E060 20.8 8.0 60 1826 1643 730 1
6.3 330 E/7360-38 T495E337(1)006A(2)E100 20.8 8.0 100 1414 1273 566 1
6.3 470 D/7343-31 T495D477(M)006A(2)E045 29.6 12.0 45 1826 1643 730 1
6.3 470 D/7343-31 T495D477(1)006A(2)E100 29.6 12.0 100 1225 1103 490 1
6.3 470 D/7343-31 T495D477(1)006A(2)E125 29.6 12.0 125 1095 986 438 1
6.3 470 D/7343-31 T495D477(1)006A(2)E150 29.6 12.0 150 1000 900 400 1
6.3 470 X/7343-43 T495X477(1)006A(2)E030 29.6 10.0 30 2345 2111 938 1
6.3 470 X/7343-43 T495X477(1)006A(2)E045 29.6 10.0 45 1915 1724 766 1
6.3 470 X/7343-43 T495X477(1)006A(2)E050 29.6 10.0 50 1817 1635 727 1
6.3 470 X/7343-43 T495X477(1)006A(2)E060 29.6 10.0 60 1658 1492 663 1
6.3 470 X/7343-43 T495X477(1)006A(2)E065 29.6 10.0 65 1593 1434 637 1
6.3 470 X/7343-43 T495X477(1)006A(2)E100 29.6 10.0 100 1285 1157 514 1
6.3 470 X/7343-43 T495X477(1)006A(2)E125 29.6 10.0 125 1149 1034 460 1
6.3 470 E/7360-38 T495E477(1)006A(2)E040 29.6 12.0 40 2236 2012 894 1
6.3 470 E/7360-38 T495E477(1)006A(2)E055 29.6 10.0 55 1907 1716 763 1
6.3 470 E/7360-38 T495E477(1)006A(2)E100 29.6 10.0 100 1414 1273 566 1
6.3 680 X/7343-43 T495X687(1)006A(2)E100 42.8 12.0 100 1285 1157 514 1
6.3 680 X/7343-43 T495X687(1)006A(2)E060 42.8 12.0 60 1658 1492 663 1
6.3 680 X/7343-43 T495X687(1)006A(2)E045 42.8 12.0 45 1915 1724 766 1
6.3 1000 E/7360-38 T495E108(1)006A(2)E050 63.0 15.0 50 2000 1800 800 1
10 2.2 A/3216-18 T495A225(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K2 0.5 6.0 1200 250 225 100 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K3 0.5 6.0 1300 240 216 96 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K4 0.5 6.0 1400 231 208 92 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 1
10 4.7 A/3216-18 T495A475(1)010A(2)E2K0 0.5 6.0 2000 194 175 78 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K3 0.5 15.0 1300 256 230 102 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K5 0.5 6.0 1500 238 214 95 1
10 6.8 A/3216-18 T495A685(1)010A(2)E1K8 0.7 6.0 1800 204 184 82 1
10 6.8 B/3528-21 T495B685(1)010A(2)E900 0.7 6.0 900 307 276 123 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K1 0.7 6.0 1100 278 250 111 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K2 0.7 6.0 1200 266 239 106 1
10 10 A/3216-18 T495A106(1)010A(2)E1K8 1.0 6.0 1800 204 184 82 1
10 10 A/3216-18 T495A106(1)010A(2) E2K0 1.0 6.0 2000 194 175 78 1
10 10 A/3216-18 T495A106(1)010A(2) E2K5 1.0 6.0 2500 173 156 69 1
10 10 A/3216-18 T495A106(1)010A(2) E3K8 1.0 6.0 3800 140 126 56 1
10 10 B/3528-21 T495B106(1)010A E600
T495B106(1)010A(2) E600 1.0 6.0 600 376 338 150 1
10 10 B/3528-21 T495B106(1)010A(2)E750 1.0 6.0 750 337 303 135 1
10 10 B/3528-21 T495B106(1)010A E1K2
T495B106(1)010A(2) E1K2 1.0 6.0 1200 266 239 106 1
10 10 B/3528-21 T495B106(1)010A(2)E3K0 1.0 6.0 3000 168 151 67 1
10 10 C/6032-28 T495C106(1)010AT E400 1.0 6.0 400 524 472 210 1
10 10 T/3528-12 T495T106(1)010AT E1K5 1.0 6.0 1500 216 194 86 1
10 15 A/3216-18 T495A156(1)010AT E1K0 1.5 6.0 1000 274 247 110 1
10 15 A/3216-18 T495A156(1)010AT E1K8 1.5 6.0 1800 204 184 82 1
10 15 B/3528-21 T495B156(1)010AT E600 1.5 6.0 600 376 338 150 1
10 15 B/3528-21 T495B156(1)010AT E900 1.5 6.0 900 307 276 123 1
10 15 T/3528-12 T495T156(1)010AT E1K2 1.5 6.0 1200 242 218 97 1
10 15 B/3528-21 T495B156(1)010A(2)E500 1.5 6.0 500 412 371 165 1
10 15 C/6032-28 T495C156(1)010A(2)E375 1.5 6.0 375 542 488 217 1
10 15 C/6032-28 T495C156(1)010A(2)E400 1.5 6.0 400 524 472 210 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 27
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 88
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
10 15 C/6032-28 T495C156(1)010A(2)E475 1.5 6.0 475 481 433 192 1
10 22 A/3216-18 T495A226(1)010AT E1K2 2.2 8.0 1200 250 225 100 1
10 22 A/3216-18 T495A226(1)010AT E1K5 2.2 8.0 1500 224 202 90 1
10 22 B/3528-21 T495B226(1)010AT E400 2.2 6.0 400 461 415 184 1
10 22 B/3528-21 T495B226(1)010AT E500 2.2 6.0 500 412 371 165 1
10 22 B/3528-21 T495B226(1)010AT E700 2.2 6.0 700 348 313 139 1
10 22 B/3528-21 T495B226(1)010AT E800 2.2 6.0 800 326 293 130 1
10 22 B/3528-21 T495B226(1)010A(2)E2K3 2.2 6.0 2300 192 173 77 1
10 22 C/6032-28 T495C226(1)010A(2)E200 2.2 6.0 200 742 668 297 1
10 22 C/6032-28 T495C226(1)010A(2)E245 2.2 6.0 245 670 603 268 1
10 22 C/6032-28 T495C226(1)010A(2)E290 2.2 6.0 290 616 554 246 1
10 22 C/6032-28 T495C226(1)010A(2)E300 2.2 6.0 300 606 545 242 1
10 22 C/6032-28 T495C226(1)010A(2)E345 2.2 6.0 345 565 509 226 1
10 22 C/6032-28 T495C226(1)010A(2)E350 2.2 6.0 350 561 505 224 1
10 22 C/6032-28 T495C226(1)010A(2)E380 2.2 6.0 380 538 484 215 1
10 33 B/3528-21 T495B336(1)010A(2)E450 3.3 6.0 450 435 392 174 1
10 33 B/3528-21 T495B336(1)010A(2)E550 3.3 6.0 550 393 354 157 1
10 33 B/3528-21 T495B336(1)010A(2)E650 3.3 6.0 650 362 326 145 1
10 33 V/7343-20 T495V336(1)010A(2)E100 3.3 6.0 100 1118 1006 447 1
10 33 V/7343-20 T495V336(1)010A(2)E150 3.3 6.0 150 913 822 365 1
10 47 B/3528-21 T495B476(1)010A(2)E500 4.7 6.0 500 412 371 165 1
10 47 B/3528-21 T495B476(1)010A(2)E650 4.7 6.0 650 362 326 145 1
10 47 C/6032-28 T495C476(1)010A(2)E300 4.7 6.0 300 606 545 242 1
10 47 D/7343-31 T495D476(1)010A(2)E080 4.7 4.0 80 1369 1232 548 1
10 47 D/7343-31 T495D476(1)010A(2)E090 4.7 6.0 90 1291 1162 516 1
10 47 D/7343-31 T495D476(1)010A(2)E100 4.7 6.0 100 1225 1103 490 1
10 47 D/7343-31 T495D476(1)010A(2)E200 4.7 4.0 200 866 779 346 1
10 47 D/7343-31 T495D476(1)010A(2)4095 4.7 4.0 200 866 779 346 1
10 68 B/3528-21 T495B686(1)010A(2)E600 6.8 10.0 600 376 338 150 1
10 68 B/3528-21 T495B686(1)010A(2)E750 6.8 10.0 750 337 303 135 1
10 68 B/3528-21 T495B686(M)010A(2)E900 6.8 10.0 900 307 276 123 1
10 68 C/6032-28 T495C686(1)010A(2)E080 6.8 6.0 80 1173 1056 469 1
10 68 C/6032-28 T495C686(1)010A(2)E200 6.8 6.0 200 742 668 297 1
10 68 C/6032-28 T495C686(1)010A(2)E225 6.8 6.0 225 699 629 280 1
10 68 C/6032-28 T495C686(1)010A(2)E250 6.8 6.0 250 663 597 265 1
10 68 V/7343-20 T495V686(1)010A(2)E070 6.8 6.0 70 1336 1202 534 1
10 68 V/7343-20 T495V686(1)010A(2)E100 6.8 6.0 100 1118 1006 447 1
10 68 V/7343-20 T495V686(1)010A(2)E140 6.8 6.0 140 945 851 378 1
10 68 V/7343-20 T495V686(1)010A(2)E200 6.8 6.0 200 791 712 316 1
10 68 D/7343-31 T495D686(1)010A(2)E070 6.8 6.0 70 1464 1318 586 1
10 68 D/7343-31 T495D686(1)010A(2)E090 6.8 6.0 90 1291 1162 516 1
10 68 D/7343-31 T495D686(1)010A(2)E100 6.8 6.0 100 1225 1103 490 1
10 68 D/7343-31 T495D686(1)010A(2)E150 6.8 6.0 150 1000 900 400 1
10 68 X/7343-43 T495X686(1)010A(2)E150 6.8 4.0 150 1049 944 420 1
10 68 X/7343-43 T495X686(1)010A(2)4095 6.8 4.0 150 1049 944 420 1
10 100 B/3528-21 T495B107(M)010A(2)E500 10.0 30.0 500 412 371 165 1
10 100 B/3528-21 T495B107(M)010A(2)E700 10.0 30.0 700 348 313 139 1
10 100 V/7343-20 T495V107(1)010A(2)E100 10.0 8.0 100 1118 1006 447 1
10 100 V/7343-20 T495V107(1)010A(2)E150 10.0 8.0 150 913 822 365 1
10 100 V/7343-20 T495V107(1)010A(2)E200 10.0 8.0 200 791 712 316 1
10 100 D/7343-31 T495D107(1)010A(2)E050 10.0 8.0 50 1732 1559 693 1
10 100 D/7343-31 T495D107(1)010A(2)E065 10.0 8.0 65 1519 1367 608 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
10 15 C/6032-28 T495C156(1)010A(2)E475 1.5 6.0 475 481 433 192 1
10 22 A/3216-18 T495A226(1)010AT E1K2 2.2 8.0 1200 250 225 100 1
10 22 A/3216-18 T495A226(1)010AT E1K5 2.2 8.0 1500 224 202 90 1
10 22 B/3528-21 T495B226(1)010AT E400 2.2 6.0 400 461 415 184 1
10 22 B/3528-21 T495B226(1)010AT E500 2.2 6.0 500 412 371 165 1
10 22 B/3528-21 T495B226(1)010AT E700 2.2 6.0 700 348 313 139 1
10 22 B/3528-21 T495B226(1)010AT E800 2.2 6.0 800 326 293 130 1
10 22 B/3528-21 T495B226(1)010A(2)E2K3 2.2 6.0 2300 192 173 77 1
10 22 C/6032-28 T495C226(1)010A(2)E200 2.2 6.0 200 742 668 297 1
10 22 C/6032-28 T495C226(1)010A(2)E245 2.2 6.0 245 670 603 268 1
10 22 C/6032-28 T495C226(1)010A(2)E290 2.2 6.0 290 616 554 246 1
10 22 C/6032-28 T495C226(1)010A(2)E300 2.2 6.0 300 606 545 242 1
10 22 C/6032-28 T495C226(1)010A(2)E345 2.2 6.0 345 565 509 226 1
10 22 C/6032-28 T495C226(1)010A(2)E350 2.2 6.0 350 561 505 224 1
10 22 C/6032-28 T495C226(1)010A(2)E380 2.2 6.0 380 538 484 215 1
10 33 B/3528-21 T495B336(1)010A(2)E450 3.3 6.0 450 435 392 174 1
10 33 B/3528-21 T495B336(1)010A(2)E550 3.3 6.0 550 393 354 157 1
10 33 B/3528-21 T495B336(1)010A(2)E650 3.3 6.0 650 362 326 145 1
10 33 V/7343-20 T495V336(1)010A(2)E100 3.3 6.0 100 1118 1006 447 1
10 33 V/7343-20 T495V336(1)010A(2)E150 3.3 6.0 150 913 822 365 1
10 47 B/3528-21 T495B476(1)010A(2)E500 4.7 6.0 500 412 371 165 1
10 47 B/3528-21 T495B476(1)010A(2)E650 4.7 6.0 650 362 326 145 1
10 47 C/6032-28 T495C476(1)010A(2)E300 4.7 6.0 300 606 545 242 1
10 47 D/7343-31 T495D476(1)010A(2)E080 4.7 4.0 80 1369 1232 548 1
10 47 D/7343-31 T495D476(1)010A(2)E090 4.7 6.0 90 1291 1162 516 1
10 47 D/7343-31 T495D476(1)010A(2)E100 4.7 6.0 100 1225 1103 490 1
10 47 D/7343-31 T495D476(1)010A(2)E200 4.7 4.0 200 866 779 346 1
10 47 D/7343-31 T495D476(1)010A(2)4095 4.7 4.0 200 866 779 346 1
10 68 B/3528-21 T495B686(1)010A(2)E600 6.8 10.0 600 376 338 150 1
10 68 B/3528-21 T495B686(1)010A(2)E750 6.8 10.0 750 337 303 135 1
10 68 B/3528-21 T495B686(M)010A(2)E900 6.8 10.0 900 307 276 123 1
10 68 C/6032-28 T495C686(1)010A(2)E080 6.8 6.0 80 1173 1056 469 1
10 68 C/6032-28 T495C686(1)010A(2)E200 6.8 6.0 200 742 668 297 1
10 68 C/6032-28 T495C686(1)010A(2)E225 6.8 6.0 225 699 629 280 1
10 68 C/6032-28 T495C686(1)010A(2)E250 6.8 6.0 250 663 597 265 1
10 68 V/7343-20 T495V686(1)010A(2)E070 6.8 6.0 70 1336 1202 534 1
10 68 V/7343-20 T495V686(1)010A(2)E100 6.8 6.0 100 1118 1006 447 1
10 68 V/7343-20 T495V686(1)010A(2)E140 6.8 6.0 140 945 851 378 1
10 68 V/7343-20 T495V686(1)010A(2)E200 6.8 6.0 200 791 712 316 1
10 68 D/7343-31 T495D686(1)010A(2)E070 6.8 6.0 70 1464 1318 586 1
10 68 D/7343-31 T495D686(1)010A(2)E090 6.8 6.0 90 1291 1162 516 1
10 68 D/7343-31 T495D686(1)010A(2)E100 6.8 6.0 100 1225 1103 490 1
10 68 D/7343-31 T495D686(1)010A(2)E150 6.8 6.0 150 1000 900 400 1
10 68 X/7343-43 T495X686(1)010A(2)E150 6.8 4.0 150 1049 944 420 1
10 68 X/7343-43 T495X686(1)010A(2)4095 6.8 4.0 150 1049 944 420 1
10 100 B/3528-21 T495B107(M)010A(2)E500 10.0 30.0 500 412 371 165 1
10 100 B/3528-21 T495B107(M)010A(2)E700 10.0 30.0 700 348 313 139 1
10 100 V/7343-20 T495V107(1)010A(2)E100 10.0 8.0 100 1118 1006 447 1
10 100 V/7343-20 T495V107(1)010A(2)E150 10.0 8.0 150 913 822 365 1
10 100 V/7343-20 T495V107(1)010A(2)E200 10.0 8.0 200 791 712 316 1
10 100 D/7343-31 T495D107(1)010A(2)E050 10.0 8.0 50 1732 1559 693 1
10 100 D/7343-31 T495D107(1)010A(2)E065 10.0 8.0 65 1519 1367 608 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 28
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 99
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
10 100 D/7343-31 T495D107(1)010A(2)E080 10.0 8.0 80 1369 1232 548 1
10 100 D/7343-31 T495D107(1)010A(2)E100 10.0 8.0 100 1225 1103 490 1
10 100 D/7343-31 T495D107(1)010A(2)E120 10.0 8.0 120 1118 1006 447 1
10 100 D/7343-31 T495D107(1)010A(2)4095 10.0 8.0 100 1225 1103 490 1
10 100 X/7343-43 T495X107(1)010A(2)E100 10.0 6.0 100 1285 1157 514 1
10 100 X/7343-43 T495X107(1)010A(2)4095 10.0 6.0 100 1285 1157 514 1
10 150 V/7343-20 T495V157(1)010A(2)E100 15.0 8.0 100 1118 1006 447 1
10 150 V/7343-20 T495V157(1)010A(2)E150 15.0 8.0 150 913 822 365 1
10 150 V/7343-20 T495V157(1)010A(2)E200 15.0 8.0 200 791 712 316 1
10 150 D/7343-31 T495D157(1)010A(2)E050 15.0 8.0 50 1732 1559 693 1
10 150 D/7343-31 T495D157(1)010A(2)E060 15.0 8.0 60 1581 1423 632 1
10 150 D/7343-31 T495D157(1)010A(2)E080 15.0 8.0 80 1369 1232 548 1
10 150 D/7343-31 T495D157(1)010A(2)E100 15.0 8.0 100 1225 1103 490 1
10 150 D/7343-31 T495D157(1)010A(2)4095 15.0 8.0 100 1225 1103 490 1
10 150 X/7343-43 T495X157(1)010A(2)E070 15.0 8.0 70 1535 1382 614 1
10 150 X/7343-43 T495X157(1)010A(2)E080 15.0 8.0 80 1436 1292 574 1
10 150 X/7343-43 T495X157(1)010A(2)E085 15.0 8.0 85 1393 1254 557 1
10 150 X/7343-43 T495X157(1)010A(2)E100 15.0 8.0 100 1285 1157 514 1
10 150 X/7343-43 T495X157(1)010A(2)4095 15.0 8.0 100 1285 1157 514 1
10 220 D/7343-31 T495D227(1)010A(2)E045 22.0 8.0 45 1826 1643 730 1
10 220 D/7343-31 T495D227(1)010A(2)E050 22.0 9.0 50 1732 1559 693 1
10 220 D/7343-31 T495D227(1)010A(2)E075 22.0 8.0 75 1414 1273 566 1
10 220 D/7343-31 T495D227(1)010A(2)E100 22.0 8.0 100 1225 1103 490 1
10 220 D/7343-31 T495D227(1)010A(2)E125 22.0 8.0 125 1095 986 438 1
10 220 X/7343-43 T495X227(1)010A(2)E045 22.0 8.0 45 1915 1724 766 1
10 220 X/7343-43 T495X227(1)010A(2)E050 22.0 8.0 50 1817 1635 727 1
10 220 X/7343-43 T495X227(1)010A(2)E060 22.0 8.0 60 1658 1492 663 1
10 220 X/7343-43 T495X227(1)010A(2)E070 22.0 8.0 70 1535 1382 614 1
10 220 X/7343-43 T495X227(1)010A(2)E080 22.0 8.0 80 1436 1292 574 1
10 220 X/7343-43 T495X227(1)010A(2)E100 22.0 8.0 100 1285 1157 514 1
10 220 X/7343-43 T495X227(1)010A(2)4095 22.0 8.0 100 1285 1157 514 1
10 330 D/7343-31 T495D337(1)010A(2)E100 33.0 8.0 100 1225 1103 490 1
10 330 D/7343-31 T495D337(1)010A(2)E125 33.0 10.0 125 1095 986 438 1
10 330 D/7343-31 T495D337(1)010A(2)E150 33.0 10.0 150 1000 900 400 1
10 330 X/7343-43 T495X337(1)010A(2)E035 33.0 10.0 35 2171 1954 868 1
10 330 X/7343-43 T495X337(1)010A(2)E040 33.0 10.0 40 2031 1828 812 1
10 330 X/7343-43 T495X337(1)010A(2)E050 33.0 10.0 50 1817 1635 727 1
10 330 X/7343-43 T495X337(1)010A(2)E060 33.0 10.0 60 1658 1492 663 1
10 330 X/7343-43 T495X337(1)010A(2)E080 33.0 10.0 80 1436 1292 574 1
10 330 X/7343-43 T495X337(1)010A(2)E100 33.0 10.0 100 1285 1157 514 1
10 330 E/7360-38 T495E337(1)010A(2)E040 33.0 8.0 40 2236 2012 894 1
10 330 E/7360-38 T495E337(1)010A(2)E060 33.0 10.0 60 1826 1643 730 1
10 330 E/7360-38 T495E337(1)010A(2)E100 33.0 10.0 100 1414 1273 566 1
10 470 X/7343-43 T495X477(1)010A(2)E045 47.0 10.0 45 1915 1724 766 1
10 470 X/7343-43 T495X477(1)010A(2)E050 47.0 10.0 50 1817 1635 727 1
10 470 X/7343-43 T495X477(1)010A(2)E060 47.0 10.0 60 1658 1492 663 1
10 470 X/7343-43 T495X477(1)010A(2)E080 47.0 10.0 80 1436 1292 574 1
10 470 X/7343-43 T495X477(1)010A(2)E100 47.0 10.0 100 1285 1157 514 1
10 470 X/7343-43 T495X477(1)010A(2)E200 47.0 10.0 200 908 817 363 1
10 470 E/7360-38 T495E477(1)010A(2)E040 47.0 10.0 40 2236 2012 894 1
10 470 E/7360-38 T495E477(1)010A(2)E060 47.0 10.0 60 1826 1643 730 1
10 470 E/7360-38 T495E477(1)010A(2)E100 47.0 10.0 100 1414 1273 566 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
10 100 D/7343-31 T495D107(1)010A(2)E080 10.0 8.0 80 1369 1232 548 1
10 100 D/7343-31 T495D107(1)010A(2)E100 10.0 8.0 100 1225 1103 490 1
10 100 D/7343-31 T495D107(1)010A(2)E120 10.0 8.0 120 1118 1006 447 1
10 100 D/7343-31 T495D107(1)010A(2)4095 10.0 8.0 100 1225 1103 490 1
10 100 X/7343-43 T495X107(1)010A(2)E100 10.0 6.0 100 1285 1157 514 1
10 100 X/7343-43 T495X107(1)010A(2)4095 10.0 6.0 100 1285 1157 514 1
10 150 V/7343-20 T495V157(1)010A(2)E100 15.0 8.0 100 1118 1006 447 1
10 150 V/7343-20 T495V157(1)010A(2)E150 15.0 8.0 150 913 822 365 1
10 150 V/7343-20 T495V157(1)010A(2)E200 15.0 8.0 200 791 712 316 1
10 150 D/7343-31 T495D157(1)010A(2)E050 15.0 8.0 50 1732 1559 693 1
10 150 D/7343-31 T495D157(1)010A(2)E060 15.0 8.0 60 1581 1423 632 1
10 150 D/7343-31 T495D157(1)010A(2)E080 15.0 8.0 80 1369 1232 548 1
10 150 D/7343-31 T495D157(1)010A(2)E100 15.0 8.0 100 1225 1103 490 1
10 150 D/7343-31 T495D157(1)010A(2)4095 15.0 8.0 100 1225 1103 490 1
10 150 X/7343-43 T495X157(1)010A(2)E070 15.0 8.0 70 1535 1382 614 1
10 150 X/7343-43 T495X157(1)010A(2)E080 15.0 8.0 80 1436 1292 574 1
10 150 X/7343-43 T495X157(1)010A(2)E085 15.0 8.0 85 1393 1254 557 1
10 150 X/7343-43 T495X157(1)010A(2)E100 15.0 8.0 100 1285 1157 514 1
10 150 X/7343-43 T495X157(1)010A(2)4095 15.0 8.0 100 1285 1157 514 1
10 220 D/7343-31 T495D227(1)010A(2)E045 22.0 8.0 45 1826 1643 730 1
10 220 D/7343-31 T495D227(1)010A(2)E050 22.0 9.0 50 1732 1559 693 1
10 220 D/7343-31 T495D227(1)010A(2)E075 22.0 8.0 75 1414 1273 566 1
10 220 D/7343-31 T495D227(1)010A(2)E100 22.0 8.0 100 1225 1103 490 1
10 220 D/7343-31 T495D227(1)010A(2)E125 22.0 8.0 125 1095 986 438 1
10 220 X/7343-43 T495X227(1)010A(2)E045 22.0 8.0 45 1915 1724 766 1
10 220 X/7343-43 T495X227(1)010A(2)E050 22.0 8.0 50 1817 1635 727 1
10 220 X/7343-43 T495X227(1)010A(2)E060 22.0 8.0 60 1658 1492 663 1
10 220 X/7343-43 T495X227(1)010A(2)E070 22.0 8.0 70 1535 1382 614 1
10 220 X/7343-43 T495X227(1)010A(2)E080 22.0 8.0 80 1436 1292 574 1
10 220 X/7343-43 T495X227(1)010A(2)E100 22.0 8.0 100 1285 1157 514 1
10 220 X/7343-43 T495X227(1)010A(2)4095 22.0 8.0 100 1285 1157 514 1
10 330 D/7343-31 T495D337(1)010A(2)E100 33.0 8.0 100 1225 1103 490 1
10 330 D/7343-31 T495D337(1)010A(2)E125 33.0 10.0 125 1095 986 438 1
10 330 D/7343-31 T495D337(1)010A(2)E150 33.0 10.0 150 1000 900 400 1
10 330 X/7343-43 T495X337(1)010A(2)E035 33.0 10.0 35 2171 1954 868 1
10 330 X/7343-43 T495X337(1)010A(2)E040 33.0 10.0 40 2031 1828 812 1
10 330 X/7343-43 T495X337(1)010A(2)E050 33.0 10.0 50 1817 1635 727 1
10 330 X/7343-43 T495X337(1)010A(2)E060 33.0 10.0 60 1658 1492 663 1
10 330 X/7343-43 T495X337(1)010A(2)E080 33.0 10.0 80 1436 1292 574 1
10 330 X/7343-43 T495X337(1)010A(2)E100 33.0 10.0 100 1285 1157 514 1
10 330 E/7360-38 T495E337(1)010A(2)E040 33.0 8.0 40 2236 2012 894 1
10 330 E/7360-38 T495E337(1)010A(2)E060 33.0 10.0 60 1826 1643 730 1
10 330 E/7360-38 T495E337(1)010A(2)E100 33.0 10.0 100 1414 1273 566 1
10 470 X/7343-43 T495X477(1)010A(2)E045 47.0 10.0 45 1915 1724 766 1
10 470 X/7343-43 T495X477(1)010A(2)E050 47.0 10.0 50 1817 1635 727 1
10 470 X/7343-43 T495X477(1)010A(2)E060 47.0 10.0 60 1658 1492 663 1
10 470 X/7343-43 T495X477(1)010A(2)E080 47.0 10.0 80 1436 1292 574 1
10 470 X/7343-43 T495X477(1)010A(2)E100 47.0 10.0 100 1285 1157 514 1
10 470 X/7343-43 T495X477(1)010A(2)E200 47.0 10.0 200 908 817 363 1
10 470 E/7360-38 T495E477(1)010A(2)E040 47.0 10.0 40 2236 2012 894 1
10 470 E/7360-38 T495E477(1)010A(2)E060 47.0 10.0 60 1826 1643 730 1
10 470 E/7360-38 T495E477(1)010A(2)E100 47.0 10.0 100 1414 1273 566 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 29
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1010
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
16 2.2 A/3216-18 T495A225(1)016A(2)E2K5 0.5 6.0 2500 173 156 69 1
16 3.3 A/3216-18 T495A335(1)016A(2)E3K0 0.5 6.0 3000 158 142 63 1
16 4.7 A/3216-18 T495A475(1)016A(2)E2K0 0.8 6.0 2000 194 175 78 1
16 4.7 B/3528-21 T495B475(1)016A(2)E700 0.8 6.0 700 348 313 139 1
16 4.7 B/3528-21 T495B475(1)016A(2)E800 0.8 6.0 800 326 293 130 1
16 6.8 C/6032-28 T495C685(1)016A(2)E750 1.1 6.0 750 383 345 153 1
16 10 B/3528-21 T495B106(1)016A(2)E650 1.6 5.0 650 362 326 145 1
16 10 B/3528-21 T495B106(1)016A(2)E800 1.6 6.0 800 326 293 130 1
16 10 B/3528-21 T495B106(1)016A(2)E2K5 1.6 6.0 2500 184 166 74 1
16 10 T/3528-12 T495T106(M)016A(2)E4K0 1.6 8.0 4000 132 119 53 1
16 15 A/3216-18 T495A156(1)016A(2)E2K5 2.4 8.0 2500 173 156 69 1
16 15 B/3528-21 T495B156(1)016A(2)E800 2.4 6.0 800 326 293 130 1
16 15 C/6032-28 T495C156(1)016A(2)E400 2.4 6.0 400 524 472 210 1
16 22 B/3528-21 T495B226(1)016A(2)E700 3.5 6.0 700 348 313 139 1
16 22 C/6032-28 T495C226(1)016A(2)E500 3.5 6.0 500 469 422 188 1
16 33 C/6032-28 T495C336(1)016A(2)E200 5.3 6.0 200 742 668 297 1
16 33 C/6032-28 T495C336(1)016A(2)E225 5.3 6.0 225 699 629 280 1
16 33 C/6032-28 T495C336(1)016A(2)E230 5.3 6.0 230 692 623 277 1
16 33 C/6032-28 T495C336(1)016A(2)E275 5.3 6.0 275 632 569 253 1
16 33 C/6032-28 T495C336(1)016A(2)E300 5.3 6.0 300 606 545 242 1
16 33 D/7343-31 T495D336(1)016A(2)E150 5.3 6.0 150 1000 900 400 1
16 33 D/7343-31 T495D336(1)016A(2)E175 5.3 6.0 175 926 833 370 1
16 33 D/7343-31 T495D336(1)016A(2)E200 5.3 6.0 200 866 779 346 1
16 33 D/7343-31 T495D336(1)016A(2)E225 5.3 4.0 225 816 734 326 1
16 33 D/7343-31 T495D336(1)016A(2)4095 5.3 4.0 250 775 698 310 1
16 47 C/6032-28 T495C476(1)016A(2)E300 7.5 6.0 300 606 545 242 1
16 47 C/6032-28 T495C476(1)016A(2)E350 7.5 6.0 350 561 505 224 1
16 47 D/7343-31 T495D476(1)016A(2)E080 7.5 6.0 80 1369 1232 548 1
16 47 D/7343-31 T495D476(1)016A(2)E100 7.5 6.0 100 1225 1103 490 1
16 47 D/7343-31 T495D476(1)016A(2)E150 7.5 6.0 150 1000 900 400 1
16 47 D/7343-31 T495D476(1)016A(2)E180 7.5 6.0 180 913 822 365 1
16 47 D/7343-31 T495D476(1)016A(2)E800 7.5 6.0 800 433 390 173 1
16 47 D/7343-31 T495D476(1)016A(2)4095 7.5 6.0 200 866 779 346 1
16 68 C/6032-28 T495C686(1)016A(2)E250 10.9 6.0 250 663 597 265 1
16 68 V/7343-20 T495V686(1)016A(2)E180 10.9 6.0 180 833 750 333 1
16 68 V/7343-20 T495V686(1)016A(2)E250 10.9 6.0 250 707 636 283 1
16 68 V/7343-20 T495V686(1)016A(2)E300 10.9 6.0 300 645 581 258 1
16 68 D/7343-31 T495D686(1)016A(2)E070 10.9 6.0 70 1464 1318 586 1
16 68 D/7343-31 T495D686(1)016A(2)E100 10.9 6.0 100 1225 1103 490 1
16 68 D/7343-31 T495D686(1)016A(2)E150 10.9 6.0 150 1000 900 400 1
16 100 D/7343-31 T495D107(1)016A(2)E100 16.0 8.0 100 1225 1103 490 1
16 100 D/7343-31 T495D107(1)016A(2)E125 16.0 8.0 125 1095 986 438 1
16 100 D/7343-31 T495D107(1)016A(2)E130 16.0 8.0 130 1074 967 430 1
16 100 D/7343-31 T495D107(1)016A(2)E150 16.0 8.0 150 1000 900 400 1
16 100 D/7343-31 T495D107(1)016A(2)E800 16.0 8.0 800 433 390 173 1
16 100 X/7343-43 T495X107(1)016A(2)E080 16.0 8.0 80 1436 1292 574 1
16 100 X/7343-43 T495X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 1
16 100 X/7343-43 T495X107(1)016A(2)4095 16.0 8.0 125 1149 1034 460 1
16 150 D/7343-31 T495D157(M)016A(2)E060 24.0 12.0 60 1581 1423 632 1
16 150 D/7343-31 T495D157(M)016A(2)E085 24.0 8.0 85 1328 1195 531 1
16 150 D/7343-31 T495D157016A(2)E100
T495D157(1)016A(2)E100 24.0 8.0 100 1225 1103 490 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
16 2.2 A/3216-18 T495A225(1)016A(2)E2K5 0.5 6.0 2500 173 156 69 1
16 3.3 A/3216-18 T495A335(1)016A(2)E3K0 0.5 6.0 3000 158 142 63 1
16 4.7 A/3216-18 T495A475(1)016A(2)E2K0 0.8 6.0 2000 194 175 78 1
16 4.7 B/3528-21 T495B475(1)016A(2)E700 0.8 6.0 700 348 313 139 1
16 4.7 B/3528-21 T495B475(1)016A(2)E800 0.8 6.0 800 326 293 130 1
16 6.8 C/6032-28 T495C685(1)016A(2)E750 1.1 6.0 750 383 345 153 1
16 10 B/3528-21 T495B106(1)016A(2)E650 1.6 5.0 650 362 326 145 1
16 10 B/3528-21 T495B106(1)016A(2)E800 1.6 6.0 800 326 293 130 1
16 10 B/3528-21 T495B106(1)016A(2)E2K5 1.6 6.0 2500 184 166 74 1
16 10 T/3528-12 T495T106(M)016A(2)E4K0 1.6 8.0 4000 132 119 53 1
16 15 A/3216-18 T495A156(1)016A(2)E2K5 2.4 8.0 2500 173 156 69 1
16 15 B/3528-21 T495B156(1)016A(2)E800 2.4 6.0 800 326 293 130 1
16 15 C/6032-28 T495C156(1)016A(2)E400 2.4 6.0 400 524 472 210 1
16 22 B/3528-21 T495B226(1)016A(2)E700 3.5 6.0 700 348 313 139 1
16 22 C/6032-28 T495C226(1)016A(2)E500 3.5 6.0 500 469 422 188 1
16 33 C/6032-28 T495C336(1)016A(2)E200 5.3 6.0 200 742 668 297 1
16 33 C/6032-28 T495C336(1)016A(2)E225 5.3 6.0 225 699 629 280 1
16 33 C/6032-28 T495C336(1)016A(2)E230 5.3 6.0 230 692 623 277 1
16 33 C/6032-28 T495C336(1)016A(2)E275 5.3 6.0 275 632 569 253 1
16 33 C/6032-28 T495C336(1)016A(2)E300 5.3 6.0 300 606 545 242 1
16 33 D/7343-31 T495D336(1)016A(2)E150 5.3 6.0 150 1000 900 400 1
16 33 D/7343-31 T495D336(1)016A(2)E175 5.3 6.0 175 926 833 370 1
16 33 D/7343-31 T495D336(1)016A(2)E200 5.3 6.0 200 866 779 346 1
16 33 D/7343-31 T495D336(1)016A(2)E225 5.3 4.0 225 816 734 326 1
16 33 D/7343-31 T495D336(1)016A(2)4095 5.3 4.0 250 775 698 310 1
16 47 C/6032-28 T495C476(1)016A(2)E300 7.5 6.0 300 606 545 242 1
16 47 C/6032-28 T495C476(1)016A(2)E350 7.5 6.0 350 561 505 224 1
16 47 D/7343-31 T495D476(1)016A(2)E080 7.5 6.0 80 1369 1232 548 1
16 47 D/7343-31 T495D476(1)016A(2)E100 7.5 6.0 100 1225 1103 490 1
16 47 D/7343-31 T495D476(1)016A(2)E150 7.5 6.0 150 1000 900 400 1
16 47 D/7343-31 T495D476(1)016A(2)E180 7.5 6.0 180 913 822 365 1
16 47 D/7343-31 T495D476(1)016A(2)E800 7.5 6.0 800 433 390 173 1
16 47 D/7343-31 T495D476(1)016A(2)4095 7.5 6.0 200 866 779 346 1
16 68 C/6032-28 T495C686(1)016A(2)E250 10.9 6.0 250 663 597 265 1
16 68 V/7343-20 T495V686(1)016A(2)E180 10.9 6.0 180 833 750 333 1
16 68 V/7343-20 T495V686(1)016A(2)E250 10.9 6.0 250 707 636 283 1
16 68 V/7343-20 T495V686(1)016A(2)E300 10.9 6.0 300 645 581 258 1
16 68 D/7343-31 T495D686(1)016A(2)E070 10.9 6.0 70 1464 1318 586 1
16 68 D/7343-31 T495D686(1)016A(2)E100 10.9 6.0 100 1225 1103 490 1
16 68 D/7343-31 T495D686(1)016A(2)E150 10.9 6.0 150 1000 900 400 1
16 100 D/7343-31 T495D107(1)016A(2)E100 16.0 8.0 100 1225 1103 490 1
16 100 D/7343-31 T495D107(1)016A(2)E125 16.0 8.0 125 1095 986 438 1
16 100 D/7343-31 T495D107(1)016A(2)E130 16.0 8.0 130 1074 967 430 1
16 100 D/7343-31 T495D107(1)016A(2)E150 16.0 8.0 150 1000 900 400 1
16 100 D/7343-31 T495D107(1)016A(2)E800 16.0 8.0 800 433 390 173 1
16 100 X/7343-43 T495X107(1)016A(2)E080 16.0 8.0 80 1436 1292 574 1
16 100 X/7343-43 T495X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 1
16 100 X/7343-43 T495X107(1)016A(2)4095 16.0 8.0 125 1149 1034 460 1
16 150 D/7343-31 T495D157(M)016A(2)E060 24.0 12.0 60 1581 1423 632 1
16 150 D/7343-31 T495D157(M)016A(2)E085 24.0 8.0 85 1328 1195 531 1
16 150 D/7343-31 T495D157016A(2)E100
T495D157(1)016A(2)E100 24.0 8.0 100 1225 1103 490 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 30
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1111
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
16 150 D/7343-31 T495D157(1)016A(2)E125 24.0 8.0 125 1095 986 438 1
16 150 D/7343-31 T495D157(1)016A(2)E130 24.0 8.0 130 1074 967 430
16 150 D/7343-31 T495D157(1)016A(2)E150 24.0 8.0 150 1000 900 400 1
16 150 X/7343-43 T495X157(1)016A(2)E075 24.0 8.0 75 1483 1335 593 1
16 150 X/7343-43 T495X157(1)016A(2)E100 24.0 8.0 100 1285 1157 514 1
16 220 X/7343-43 T495X227(1)016A(2)E100 35.2 8.0 100 1285 1157 514 1
16 220 E/7360-38 T495E227(1)016A(2)E050 35.2 12.0 50 2000 1800 800 1
16 220 E/7360-38 T495E227(1)016A(2)E075 35.2 8.0 75 1633 1470 653 1
16 220 E/7360-38 T495E227(1)016A(2)E100 35.2 7.2 100 1414 1273 566 1
16 220 E/7360-38 T495E227(1)016A(2)E150 35.2 7.2 150 1155 1040 462 1
20 1A/3216-18 T495A105(1)020A(2)E3K0 0.5 4.0 3000 158 142 63 1
20 1A/3216-18 T495A105(1)020A(2)E5K0 0.5 4.0 5000 122 110 49 1
20 4.7 A/3216-18 T495A475(1)020A(2)E1K8 0.9 6.0 1800 204 184 82 1
20 4.7 A/3216-18 T495A475(1)020A(2)E2K0 0.9 6.0 2000 194 175 78 1
20 10 B/3528-21 T495B106(1)020A(2)E1K0 2.0 6.0 1000 292 263 117 1
20 10 B/3528-21 T495B106(1)020A(2)E800 2.0 6.0 800 326 293 130 1
20 10 C/6032-28 T495C106(1)020A(2)E300 2.0 6.0 300 606 545 242 1
20 10 C/6032-28 T495C106(1)020A(2)E350 2.0 6.0 350 561 505 224 1
20 10 C/6032-28 T495C106(1)020A(2)E400 2.0 6.0 400 524 472 210 1
20 10 C/6032-28 T495C106(1)020A(2)E450 2.0 6.0 450 494 445 198 1
20 10 C/6032-28 T495C106(1)020A(2)E475 2.0 6.0 475 481 433 192 1
20 15 C/6032-28 T495C156(1)020A(2)E375 3.0 6.0 375 542 488 217 1
20 15 C/6032-28 T495C156(1)020A(2)E400 3.0 6.0 400 524 472 210 1
20 15 D/7343-31 T495D156(1)020A(2)E275 3.0 4.0 275 739 665 296 1
20 15 D/7343-31 T495D156(1)020A(2)E1K2 3.0 4.0 1200 354 319 142 1
20 15 D/7343-31 T495D156(1)020A(2)4095 3.0 4.0 275 739 665 296 1
20 22 D/7343-31 T495D226(1)020A(2)E180 4.4 4.0 180 913 822 365 1
20 22 D/7343-31 T495D226(1)020A(2)E200 4.4 4.0 200 866 779 346 1
20 22 D/7343-31 T495D226(1)020A(2)E225 4.4 4.0 225 816 734 326 1
20 22 D/7343-31 T495D226(1)020A(2)4095 4.4 4.0 275 739 665 296 1
20 33 D/7343-31 T495D336(1)020A(2)E100 6.6 6.0 100 1225 1103 490 1
20 33 D/7343-31 T495D336(1)020A(2)E150 6.6 6.0 150 1000 900 400 1
20 33 D/7343-31 T495D336(1)020A(2)E200 6.6 6.0 200 866 779 346 1
20 47 D/7343-31 T495D476(1)020A(2)E075 9.4 6.0 75 1414 1273 566 1
20 47 D/7343-31 T495D476(1)020A(2)E100 9.4 6.0 100 1225 1103 490 1
20 47 D/7343-31 T495D476(1)020A(2)E150 9.4 6.0 150 1000 900 400 1
20 47 D/7343-31 T495D476(1)020A(2)E175 9.4 6.0 175 926 833 370 1
20 47 D/7343-31 T495D476(1)020A(2)E200 9.4 6.0 200 866 779 346 1
20 47 D/7343-31 T495D476(1)020A(2)E250 9.4 6.0 250 775 698 310 1
20 47 X/7343-43 T495X476(1)020A(2)E065 9.4 8.0 65 1593 1434 637 1
20 47 X/7343-43 T495X476(1)020A(2)E070 9.4 6.0 70 1535 1382 614 1
20 47 X/7343-43 T495X476(1)020A(2)E100 9.4 6.0 100 1285 1157 514 1
20 47 X/7343-43 T495X476(1)020A(2)E125 9.4 6.0 125 1149 1034 460 1
20 47 X/7343-43 T495X476(1)020A(2)E150 9.4 4.0 150 1049 944 420 1
20 47 X/7343-43 T495X476(1)020A(2)4095 9.4 4.0 150 1049 944 420 1
20 68 D/7343-31 T495D686(1)020A(2)E070 13.6 8.0 70 1464 1318 586 1
20 68 D/7343-31 T495D686(1)020A(2)E150 13.6 8.0 150 1000 900 400 1
20 68 D/7343-31 T495D686(1)020A(2)E200 13.6 8.0 200 866 779 346 1
20 68 D/7343-31 T495D686(1)020A(2)E300 13.6 8.0 300 707 636 283 1
20 68 X/7343-43 T495X686(1)020A(2)E120 13.6 6.0 120 1173 1056 469 1
20 68 X/7343-43 T495X686(1)020A(2)E150 13.6 6.0 150 1049 944 420 1
20 68 X/7343-43 T495X686(1)020A(2)E200 13.6 6.0 200 908 817 363 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
16 150 D/7343-31 T495D157(1)016A(2)E125 24.0 8.0 125 1095 986 438 1
16 150 D/7343-31 T495D157(1)016A(2)E130 24.0 8.0 130 1074 967 430
16 150 D/7343-31 T495D157(1)016A(2)E150 24.0 8.0 150 1000 900 400 1
16 150 X/7343-43 T495X157(1)016A(2)E075 24.0 8.0 75 1483 1335 593 1
16 150 X/7343-43 T495X157(1)016A(2)E100 24.0 8.0 100 1285 1157 514 1
16 220 X/7343-43 T495X227(1)016A(2)E100 35.2 8.0 100 1285 1157 514 1
16 220 E/7360-38 T495E227(1)016A(2)E050 35.2 12.0 50 2000 1800 800 1
16 220 E/7360-38 T495E227(1)016A(2)E075 35.2 8.0 75 1633 1470 653 1
16 220 E/7360-38 T495E227(1)016A(2)E100 35.2 7.2 100 1414 1273 566 1
16 220 E/7360-38 T495E227(1)016A(2)E150 35.2 7.2 150 1155 1040 462 1
20 1A/3216-18 T495A105(1)020A(2)E3K0 0.5 4.0 3000 158 142 63 1
20 1A/3216-18 T495A105(1)020A(2)E5K0 0.5 4.0 5000 122 110 49 1
20 4.7 A/3216-18 T495A475(1)020A(2)E1K8 0.9 6.0 1800 204 184 82 1
20 4.7 A/3216-18 T495A475(1)020A(2)E2K0 0.9 6.0 2000 194 175 78 1
20 10 B/3528-21 T495B106(1)020A(2)E1K0 2.0 6.0 1000 292 263 117 1
20 10 B/3528-21 T495B106(1)020A(2)E800 2.0 6.0 800 326 293 130 1
20 10 C/6032-28 T495C106(1)020A(2)E300 2.0 6.0 300 606 545 242 1
20 10 C/6032-28 T495C106(1)020A(2)E350 2.0 6.0 350 561 505 224 1
20 10 C/6032-28 T495C106(1)020A(2)E400 2.0 6.0 400 524 472 210 1
20 10 C/6032-28 T495C106(1)020A(2)E450 2.0 6.0 450 494 445 198 1
20 10 C/6032-28 T495C106(1)020A(2)E475 2.0 6.0 475 481 433 192 1
20 15 C/6032-28 T495C156(1)020A(2)E375 3.0 6.0 375 542 488 217 1
20 15 C/6032-28 T495C156(1)020A(2)E400 3.0 6.0 400 524 472 210 1
20 15 D/7343-31 T495D156(1)020A(2)E275 3.0 4.0 275 739 665 296 1
20 15 D/7343-31 T495D156(1)020A(2)E1K2 3.0 4.0 1200 354 319 142 1
20 15 D/7343-31 T495D156(1)020A(2)4095 3.0 4.0 275 739 665 296 1
20 22 D/7343-31 T495D226(1)020A(2)E180 4.4 4.0 180 913 822 365 1
20 22 D/7343-31 T495D226(1)020A(2)E200 4.4 4.0 200 866 779 346 1
20 22 D/7343-31 T495D226(1)020A(2)E225 4.4 4.0 225 816 734 326 1
20 22 D/7343-31 T495D226(1)020A(2)4095 4.4 4.0 275 739 665 296 1
20 33 D/7343-31 T495D336(1)020A(2)E100 6.6 6.0 100 1225 1103 490 1
20 33 D/7343-31 T495D336(1)020A(2)E150 6.6 6.0 150 1000 900 400 1
20 33 D/7343-31 T495D336(1)020A(2)E200 6.6 6.0 200 866 779 346 1
20 47 D/7343-31 T495D476(1)020A(2)E075 9.4 6.0 75 1414 1273 566 1
20 47 D/7343-31 T495D476(1)020A(2)E100 9.4 6.0 100 1225 1103 490 1
20 47 D/7343-31 T495D476(1)020A(2)E150 9.4 6.0 150 1000 900 400 1
20 47 D/7343-31 T495D476(1)020A(2)E175 9.4 6.0 175 926 833 370 1
20 47 D/7343-31 T495D476(1)020A(2)E200 9.4 6.0 200 866 779 346 1
20 47 D/7343-31 T495D476(1)020A(2)E250 9.4 6.0 250 775 698 310 1
20 47 X/7343-43 T495X476(1)020A(2)E065 9.4 8.0 65 1593 1434 637 1
20 47 X/7343-43 T495X476(1)020A(2)E070 9.4 6.0 70 1535 1382 614 1
20 47 X/7343-43 T495X476(1)020A(2)E100 9.4 6.0 100 1285 1157 514 1
20 47 X/7343-43 T495X476(1)020A(2)E125 9.4 6.0 125 1149 1034 460 1
20 47 X/7343-43 T495X476(1)020A(2)E150 9.4 4.0 150 1049 944 420 1
20 47 X/7343-43 T495X476(1)020A(2)4095 9.4 4.0 150 1049 944 420 1
20 68 D/7343-31 T495D686(1)020A(2)E070 13.6 8.0 70 1464 1318 586 1
20 68 D/7343-31 T495D686(1)020A(2)E150 13.6 8.0 150 1000 900 400 1
20 68 D/7343-31 T495D686(1)020A(2)E200 13.6 8.0 200 866 779 346 1
20 68 D/7343-31 T495D686(1)020A(2)E300 13.6 8.0 300 707 636 283 1
20 68 X/7343-43 T495X686(1)020A(2)E120 13.6 6.0 120 1173 1056 469 1
20 68 X/7343-43 T495X686(1)020A(2)E150 13.6 6.0 150 1049 944 420 1
20 68 X/7343-43 T495X686(1)020A(2)E200 13.6 6.0 200 908 817 363 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 31
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1212
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
20 68 X/7343-43 T495X686(1)020A(2)4095 13.6 6.0 150 1049 944 420 1
20 100 X/7343-43 T495X107(1)020A(2)E100 20.0 6.0 100 1285 1157 514 1
20 100 X/7343-43 T495X107(1)020A(2)E150 20.0 8.0 150 1049 944 420 1
20 100 E/7360-38 T495E107(1)020A(2)E060 20.0 8.0 60 1826 1643 730 1
20 100 E/7360-38 T495E107(1)020A(2)E085 20.0 8.0 85 1534 1381 614 1
20 100 E/7360-38 T495E107(1)020A(2)E100 20.0 8.0 100 1414 1273 566 1
20 100 E/7360-38 T495E107(1)020A(2)E200 20.0 8.0 200 1000 900 400 1
20 150 E/7360-38 T495E157(1)020A(2)E080 30.0 8.0 80 1581 1423 632 1
25 0.47 A/3216-18 T495A474(1)025A(2)E4K5 0.5 4.0 4500 129 116 52 1
25 0.47 A/3216-18 T495A474(1)025A(2)E7K0 0.5 4.0 7000 104 94 42 1
25 1A/3216-18 T495A105(1)025A(2)E2K5 0.5 4.0 2500 173 156 69 1
25 1A/3216-18 T495A105(1)025A(2)E3K0 0.5 4.0 3000 158 142 63 1
25 1A/3216-18 T495A105(1)025A(2)E4K0 0.5 4.0 4000 137 123 55 1
25 1A/3216-18 T495A105(1)025A(2)E5K0 0.5 4.0 5000 122 110 49 1
25 2.2 C/6032-28 T495C225(1)025A(2)E1K3 0.6 6.0 1300 291 262 116 1
25 3.3 C/6032-28 T495C335(1)025A(2)E750 0.8 6.0 750 383 345 153 1
25 4.7 C/6032-28 T495C475(1)025A(2)E530 1.2 6.0 530 456 410 182 1
25 4.7 C/6032-28 T495C475(1)025A(2)E575 1.2 6.0 575 437 393 175 1
25 4.7 B/3528-21 T495B475(1)025A(2)E700 1.2 6.0 700 348 313 139 1
25 4.7 B/3528-21 T495B475(1)025A(2)E750 1.2 6.0 750 337 303 135 1
25 4.7 B/3528-21 T495B475(1)025A(2)E800 1.2 6.0 800 326 293 130 1
25 4.7 B/3528-21 T495B475(1)025A(2)E900 1.2 6.0 900 307 276 123 1
25 4.7 B/3528-21 T495B475(1)025A(2)E1K0 1.2 6.0 1000 292 263 117 1
25 6.8 B/3528-21 T495B685(1)025A(2)E1K5 1.7 6.0 1500 238 214 95 1
25 6.8 C/6032-28 T495C685(1)025A(2)E400 1.7 6.0 400 524 472 210 1
25 6.8 C/6032-28 T495C685(1)025A(2)E490 1.7 6.0 490 474 427 190 1
25 6.8 C/6032-28 T495C685(1)025A(2)E500 1.7 6.0 500 469 422 188 1
25 10 C/6032-28 T495C106(1)025A(2)E275 2.5 6.0 275 632 569 253 1
25 10 C/6032-28 T495C106(1)025A(2)E300 2.5 6.0 300 606 545 242 1
25 10 C/6032-28 T495C106(1)025A(2)E450 2.5 6.0 450 494 445 198 1
25 10 D/7343-31 T495D106(1)025A(2)E1K2 2.5 6.0 1200 354 319 142 1
25 15 D/7343-31 T495D156(1)025A(2)E100 3.8 6.0 100 1225 1103 490 1
25 15 D/7343-31 T495D156(1)025A(2)E230 3.8 4.0 230 808 727 323 1
25 15 D/7343-31 T495D156(1)025A(2)E275 3.8 6.0 275 739 665 296 1
25 15 D/7343-31 T495D156(1)025A(2)4095 3.8 6.0 275 739 665 296 1
25 15 X/7343-43 T495X156(1)025A(2)E200 3.8 4.0 200 908 817 363 1
25 15 X/7343-43 T495X156(1)025A(2)4095 3.8 4.0 200 908 817 363 1
25 22 C/6032-28 T495C226(1)025A(2)E275 5.5 6.0 275 632 569 253 1
25 22 C/6032-28 T495C226(1)025A(2)E280 5.5 6.0 280 627 564 251 1
25 22 C/6032-28 T495C226(1)025A(2)E300 5.5 8.0 300 606 545 242 1
25 22 C/6032-28 T495C226(1)025A(2)E900 5.5 6.0 900 350 315 140 1
25 22 D/7343-31 T495D226(1)025A(2)E200 5.5 6.0 200 866 779 346 1
25 22 D/7343-31 T495D226(1)025A(2)E230 5.5 6.0 230 808 727 323 1
25 22 X/7343-43 T495X226(1)025A(2)E225 5.5 4.0 225 856 770 342 1
25 22 X/7343-43 T495X226(1)025A(2)4095 5.5 4.0 225 856 770 342 1
25 33 D/7343-31 T495D336(1)025A(2)E090 8.3 6.0 90 1291 1162 516 1
25 33 D/7343-31 T495D336(1)025A(2)E100 8.3 6.0 100 1225 1103 490 1
25 33 D/7343-31 T495D336(1)025A(2)E150 8.3 6.0 150 1000 900 400 1
25 33 D/7343-31 T495D336(1)025A(2)E200 8.3 6.0 200 866 779 346 1
25 33 D/7343-31 T495D336(1)025A(2)E225 8.3 6.0 225 816 734 326 1
25 33 D/7343-31 T495D336(1)025A(2)E230 8.3 6.0 230 808 727 323 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
20 68 X/7343-43 T495X686(1)020A(2)4095 13.6 6.0 150 1049 944 420 1
20 100 X/7343-43 T495X107(1)020A(2)E100 20.0 6.0 100 1285 1157 514 1
20 100 X/7343-43 T495X107(1)020A(2)E150 20.0 8.0 150 1049 944 420 1
20 100 E/7360-38 T495E107(1)020A(2)E060 20.0 8.0 60 1826 1643 730 1
20 100 E/7360-38 T495E107(1)020A(2)E085 20.0 8.0 85 1534 1381 614 1
20 100 E/7360-38 T495E107(1)020A(2)E100 20.0 8.0 100 1414 1273 566 1
20 100 E/7360-38 T495E107(1)020A(2)E200 20.0 8.0 200 1000 900 400 1
20 150 E/7360-38 T495E157(1)020A(2)E080 30.0 8.0 80 1581 1423 632 1
25 0.47 A/3216-18 T495A474(1)025A(2)E4K5 0.5 4.0 4500 129 116 52 1
25 0.47 A/3216-18 T495A474(1)025A(2)E7K0 0.5 4.0 7000 104 94 42 1
25 1A/3216-18 T495A105(1)025A(2)E2K5 0.5 4.0 2500 173 156 69 1
25 1A/3216-18 T495A105(1)025A(2)E3K0 0.5 4.0 3000 158 142 63 1
25 1A/3216-18 T495A105(1)025A(2)E4K0 0.5 4.0 4000 137 123 55 1
25 1A/3216-18 T495A105(1)025A(2)E5K0 0.5 4.0 5000 122 110 49 1
25 2.2 C/6032-28 T495C225(1)025A(2)E1K3 0.6 6.0 1300 291 262 116 1
25 3.3 C/6032-28 T495C335(1)025A(2)E750 0.8 6.0 750 383 345 153 1
25 4.7 C/6032-28 T495C475(1)025A(2)E530 1.2 6.0 530 456 410 182 1
25 4.7 C/6032-28 T495C475(1)025A(2)E575 1.2 6.0 575 437 393 175 1
25 4.7 B/3528-21 T495B475(1)025A(2)E700 1.2 6.0 700 348 313 139 1
25 4.7 B/3528-21 T495B475(1)025A(2)E750 1.2 6.0 750 337 303 135 1
25 4.7 B/3528-21 T495B475(1)025A(2)E800 1.2 6.0 800 326 293 130 1
25 4.7 B/3528-21 T495B475(1)025A(2)E900 1.2 6.0 900 307 276 123 1
25 4.7 B/3528-21 T495B475(1)025A(2)E1K0 1.2 6.0 1000 292 263 117 1
25 6.8 B/3528-21 T495B685(1)025A(2)E1K5 1.7 6.0 1500 238 214 95 1
25 6.8 C/6032-28 T495C685(1)025A(2)E400 1.7 6.0 400 524 472 210 1
25 6.8 C/6032-28 T495C685(1)025A(2)E490 1.7 6.0 490 474 427 190 1
25 6.8 C/6032-28 T495C685(1)025A(2)E500 1.7 6.0 500 469 422 188 1
25 10 C/6032-28 T495C106(1)025A(2)E275 2.5 6.0 275 632 569 253 1
25 10 C/6032-28 T495C106(1)025A(2)E300 2.5 6.0 300 606 545 242 1
25 10 C/6032-28 T495C106(1)025A(2)E450 2.5 6.0 450 494 445 198 1
25 10 D/7343-31 T495D106(1)025A(2)E1K2 2.5 6.0 1200 354 319 142 1
25 15 D/7343-31 T495D156(1)025A(2)E100 3.8 6.0 100 1225 1103 490 1
25 15 D/7343-31 T495D156(1)025A(2)E230 3.8 4.0 230 808 727 323 1
25 15 D/7343-31 T495D156(1)025A(2)E275 3.8 6.0 275 739 665 296 1
25 15 D/7343-31 T495D156(1)025A(2)4095 3.8 6.0 275 739 665 296 1
25 15 X/7343-43 T495X156(1)025A(2)E200 3.8 4.0 200 908 817 363 1
25 15 X/7343-43 T495X156(1)025A(2)4095 3.8 4.0 200 908 817 363 1
25 22 C/6032-28 T495C226(1)025A(2)E275 5.5 6.0 275 632 569 253 1
25 22 C/6032-28 T495C226(1)025A(2)E280 5.5 6.0 280 627 564 251 1
25 22 C/6032-28 T495C226(1)025A(2)E300 5.5 8.0 300 606 545 242 1
25 22 C/6032-28 T495C226(1)025A(2)E900 5.5 6.0 900 350 315 140 1
25 22 D/7343-31 T495D226(1)025A(2)E200 5.5 6.0 200 866 779 346 1
25 22 D/7343-31 T495D226(1)025A(2)E230 5.5 6.0 230 808 727 323 1
25 22 X/7343-43 T495X226(1)025A(2)E225 5.5 4.0 225 856 770 342 1
25 22 X/7343-43 T495X226(1)025A(2)4095 5.5 4.0 225 856 770 342 1
25 33 D/7343-31 T495D336(1)025A(2)E090 8.3 6.0 90 1291 1162 516 1
25 33 D/7343-31 T495D336(1)025A(2)E100 8.3 6.0 100 1225 1103 490 1
25 33 D/7343-31 T495D336(1)025A(2)E150 8.3 6.0 150 1000 900 400 1
25 33 D/7343-31 T495D336(1)025A(2)E200 8.3 6.0 200 866 779 346 1
25 33 D/7343-31 T495D336(1)025A(2)E225 8.3 6.0 225 816 734 326 1
25 33 D/7343-31 T495D336(1)025A(2)E230 8.3 6.0 230 808 727 323 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 32
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1313
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
25 33 D/7343-31 T495D336(1)025A(2)E300 8.3 6.0 300 707 636 283 1
25 33 X/7343-43 T495X336(1)025A(2)E100 8.3 4.0 100 1285 1157 514 1
25 33 X/7343-43 T495X336(1)025A(2)E175 8.3 4.0 175 971 874 388 1
25 33 X/7343-43 T495X336(1)025A(2)E200 8.3 4.0 200 908 817 363 1
25 33 X/7343-43 T495X336(1)025A(2)4095 8.3 4.0 175 971 874 388 1
25 47 X/7343-43 T495X476025A(2)E080
T495X476(1)025A(2)E080 11.8 8.0 80 1436 1292 574 1
25 47 X/7343-43 T495X476(1)025A(2)E120 11.8 6.0 120 1173 1056 469 1
25 47 X/7343-43 T495X476025A(2)E150
T495X476(1)025A(2)E150 11.8 6.0 150 1049 944 420 1
25 47 X/7343-43 T4 9 5 X47 6 0 2 5 A (2) E18 5
T495X476(1)025A(2)E185 11.8 8.0 185 944 850 378 1
25 47 X/7343-43 T495X476025A(2)E200
T495X476(1)025A(2)E200 11.8 6.0 200 908 817 363 1
25 47 D/7343-31 T495D476(1)025A(2)E100 11.8 10.0 100 1225 1103 490 1
25 47 D/7343-31 T495D476025A(2)E120
T495D476(1)025A(2)E120 11.8 10.0 120 1118 1006 447 1
25 47 D/7343-31 T495D476(1)025A(2)E130 11.8 10.0 130 1074 967 430 1
25 47 D/7343-31 T495D476(1)025A(2)E150 11.8 10.0 150 1000 900 400 1
25 47 D/7343-31 T495D476(1)025A(2)E250 11.8 10.0 250 775 698 310 1
25 68 D/7343-31 T495D686(1)025A(2)E150 17.0 10.0 150 1000 900 400 1
25 68 D/7343-31 T495D686(1)025A(2)E200 17.0 10.0 200 866 779 346 1
25 68 X/7343-43 T495X686(1)025A(2)E125 17.0 8.0 125 1149 1034 460 1
25 68 X/7343-43 T495X686(1)025A(2)E130 17.0 8.0 130 1127 1014 451 1
25 68 X/7343-43 T495X686(1)025A(2)E150 17.0 8.0 150 1049 944 420 1
25 68 X/7343-43 T495X686(1)025A(2)E200 17.0 8.0 200 908 817 363 1
25 100 X/7343-43 T495X107(1)025A(2)E150 25.0 10.0 150 1049 944 420 1
25 100 E/7360-38 T495E107(1)025A(2)E100 25.0 8.0 100 1414 1273 566 1
35 0.47 B/3528-21 T495B474(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K2 0.5 4.0 2200 197 177 79 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K5 0.5 4.0 2500 184 166 74 1
35 0.47 B/3528-21 T495B474(1)035A(2)E11K 0.5 4.0 11000 88 79 35 1
35 1A/3216-18 T495A105(1)035A(2)E3K0 0.5 4.0 3000 158 142 63 1
35 1B/3528-21 T495B105(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 1
35 1B/3528-21 T495B105(1)035A(2)E1K7 0.5 4.0 1700 224 202 90 1
35 1B/3528-21 T495B105(1)035A(2)E2K0 0.5 4.0 2000 206 185 82 1
35 1B/3528-21 T495B105(1)035A(2)E7K0 0.5 4.0 7000 110 99 44 1
35 2.2 B/3528-21 T495B225(1)035A(2)E1K5 0.8 6.0 1500 238 214 95 1
35 2.2 B/3528-21 T495B225(1)035A(2)E2K0 0.8 6.0 2000 206 185 82 1
35 2.2 C/6032-28 T495C225(1)035A(2)E750 0.8 6.0 750 383 345 153 1
35 3.3 B/3528-21 T495B335(1)035A(2)E1K0 1.2 6.0 1000 292 263 117 1
35 3.3 B/3528-21 T495B335(1)035A(2)E900 1.2 6.0 900 307 276 123 1
35 3.3 C/6032-28 T495C335(1)035A(2)E525 1.2 6.0 525 458 412 183 1
35 3.3 C/6032-28 T495C335(1)035A(2)E550 1.2 6.0 550 447 402 179 1
35 3.3 C/6032-28 T495C335(1)035A(2)E600 1.2 6.0 600 428 385 171 1
35 4.7 B/3528-21 T495B475(1)035A(2)E1K0 1.6 6.0 1000 292 263 117 1
35 4.7 C/6032-28 T495C475(1)035A(2)E450 1.6 6.0 450 494 445 198 1
35 4.7 C/6032-28 T495C475(1)035A(2)E500 1.6 6.0 500 469 422 188 1
35 4.7 C/6032-28 T495C475(1)035A(2)E600 1.6 6.0 600 428 385 171 1
35 4.7 C/6032-28 T495C475(1)035A(2)4095 1.6 6.0 600 428 385 171 1
35 4.7 D/7343-31 T495D475(1)035A(2)E300 1.6 6.0 300 707 636 283 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
25 33 D/7343-31 T495D336(1)025A(2)E300 8.3 6.0 300 707 636 283 1
25 33 X/7343-43 T495X336(1)025A(2)E100 8.3 4.0 100 1285 1157 514 1
25 33 X/7343-43 T495X336(1)025A(2)E175 8.3 4.0 175 971 874 388 1
25 33 X/7343-43 T495X336(1)025A(2)E200 8.3 4.0 200 908 817 363 1
25 33 X/7343-43 T495X336(1)025A(2)4095 8.3 4.0 175 971 874 388 1
25 47 X/7343-43 T495X476025A(2)E080
T495X476(1)025A(2)E080 11.8 8.0 80 1436 1292 574 1
25 47 X/7343-43 T495X476(1)025A(2)E120 11.8 6.0 120 1173 1056 469 1
25 47 X/7343-43 T495X476025A(2)E150
T495X476(1)025A(2)E150 11.8 6.0 150 1049 944 420 1
25 47 X/7343-43 T4 9 5 X47 6 0 2 5 A (2) E18 5
T495X476(1)025A(2)E185 11.8 8.0 185 944 850 378 1
25 47 X/7343-43 T495X476025A(2)E200
T495X476(1)025A(2)E200 11.8 6.0 200 908 817 363 1
25 47 D/7343-31 T495D476(1)025A(2)E100 11.8 10.0 100 1225 1103 490 1
25 47 D/7343-31 T495D476025A(2)E120
T495D476(1)025A(2)E120 11.8 10.0 120 1118 1006 447 1
25 47 D/7343-31 T495D476(1)025A(2)E130 11.8 10.0 130 1074 967 430 1
25 47 D/7343-31 T495D476(1)025A(2)E150 11.8 10.0 150 1000 900 400 1
25 47 D/7343-31 T495D476(1)025A(2)E250 11.8 10.0 250 775 698 310 1
25 68 D/7343-31 T495D686(1)025A(2)E150 17.0 10.0 150 1000 900 400 1
25 68 D/7343-31 T495D686(1)025A(2)E200 17.0 10.0 200 866 779 346 1
25 68 X/7343-43 T495X686(1)025A(2)E125 17.0 8.0 125 1149 1034 460 1
25 68 X/7343-43 T495X686(1)025A(2)E130 17.0 8.0 130 1127 1014 451 1
25 68 X/7343-43 T495X686(1)025A(2)E150 17.0 8.0 150 1049 944 420 1
25 68 X/7343-43 T495X686(1)025A(2)E200 17.0 8.0 200 908 817 363 1
25 100 X/7343-43 T495X107(1)025A(2)E150 25.0 10.0 150 1049 944 420 1
25 100 E/7360-38 T495E107(1)025A(2)E100 25.0 8.0 100 1414 1273 566 1
35 0.47 B/3528-21 T495B474(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K2 0.5 4.0 2200 197 177 79 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K5 0.5 4.0 2500 184 166 74 1
35 0.47 B/3528-21 T495B474(1)035A(2)E11K 0.5 4.0 11000 88 79 35 1
35 1A/3216-18 T495A105(1)035A(2)E3K0 0.5 4.0 3000 158 142 63 1
35 1B/3528-21 T495B105(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 1
35 1B/3528-21 T495B105(1)035A(2)E1K7 0.5 4.0 1700 224 202 90 1
35 1B/3528-21 T495B105(1)035A(2)E2K0 0.5 4.0 2000 206 185 82 1
35 1B/3528-21 T495B105(1)035A(2)E7K0 0.5 4.0 7000 110 99 44 1
35 2.2 B/3528-21 T495B225(1)035A(2)E1K5 0.8 6.0 1500 238 214 95 1
35 2.2 B/3528-21 T495B225(1)035A(2)E2K0 0.8 6.0 2000 206 185 82 1
35 2.2 C/6032-28 T495C225(1)035A(2)E750 0.8 6.0 750 383 345 153 1
35 3.3 B/3528-21 T495B335(1)035A(2)E1K0 1.2 6.0 1000 292 263 117 1
35 3.3 B/3528-21 T495B335(1)035A(2)E900 1.2 6.0 900 307 276 123 1
35 3.3 C/6032-28 T495C335(1)035A(2)E525 1.2 6.0 525 458 412 183 1
35 3.3 C/6032-28 T495C335(1)035A(2)E550 1.2 6.0 550 447 402 179 1
35 3.3 C/6032-28 T495C335(1)035A(2)E600 1.2 6.0 600 428 385 171 1
35 4.7 B/3528-21 T495B475(1)035A(2)E1K0 1.6 6.0 1000 292 263 117 1
35 4.7 C/6032-28 T495C475(1)035A(2)E450 1.6 6.0 450 494 445 198 1
35 4.7 C/6032-28 T495C475(1)035A(2)E500 1.6 6.0 500 469 422 188 1
35 4.7 C/6032-28 T495C475(1)035A(2)E600 1.6 6.0 600 428 385 171 1
35 4.7 C/6032-28 T495C475(1)035A(2)4095 1.6 6.0 600 428 385 171 1
35 4.7 D/7343-31 T495D475(1)035A(2)E300 1.6 6.0 300 707 636 283 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number
DC
Leakage DF ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 33
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1414
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
35 6.8 C/6032-28 T495C685(1)035A(2)E1K8 2.4 6.0 1800 247 222 99 1
35 6.8 D/7343-31 T495D685(1)035A(2)E150 2.4 6.0 150 1000 900 400 1
35 6.8 D/7343-31 T495D685(1)035A(2)E300 2.4 6.0 300 707 636 283 1
35 6.8 D/7343-31 T495D685(1)035A(2)E400 2.4 6.0 400 612 551 245 1
35 6.8 X/7343-43 T495X685(1)035A(2)E300 2.4 4.0 300 742 668 297 1
35 6.8 X/7343-43 T495X685(1)035A(2)4095 2.4 4.0 300 742 668 297 1
35 10 D/7343-31 T495D106(1)035A(2)E120 3.5 4.0 120 1118 1006 447 1
35 10 D/7343-31 T495D106(1)035A(2)E125 3.5 6.0 125 1095 986 438 1
35 10 D/7343-31 T495D106(1)035A(2)E130 3.5 6.0 130 1074 967 430 1
35 10 D/7343-31 T495D106(1)035A(2)E250 3.5 6.0 250 775 698 310 1
35 10 D/7343-31 T495D106(1)035A(2)E260 3.5 6.0 260 760 684 304 1
35 10 D/7343-31 T495D106(1)035A(2)E300 3.5 6.0 300 707 636 283 1
35 10 D/7343-31 T495D106(1)035A(2)E1K0 3.5 6.0 1000 387 348 155 1
35 10 D/7343-31 T495D106(1)035A(2)4095 3.5 4.0 300 707 636 283 1
35 10 X/7343-43 T495X106(1)035A(2)E175 3.5 6.0 175 971 874 388 1
35 10 X/7343-43 T495X106(1)035A(2)E200 3.5 6.0 200 908 817 363 1
35 10 X/7343-43 T495X106(1)035A(2)E250 3.5 4.0 250 812 731 325 1
35 10 X/7343-43 T495X106(1)035A(2)E260 3.5 4.0 260 797 717 319 1
35 10 X/7343-43 T495X106(1)035A(2)4095 3.5 4.0 250 812 731 325 1
35 15 D/7343-31 T495D156(1)035A(2)E225 5.3 6.0 225 816 734 326 1
35 15 D/7343-31 T495D156(1)035A(2)E260 5.3 6.0 260 760 684 304 1
35 15 D/7343-31 T495D156(1)035A(2)E300 5.3 6.0 300 707 636 283 1
35 15 X/7343-43 T495X156(1)035A(2)E200 5.3 6.0 200 908 817 363 1
35 15 X/7343-43 T495X156(1)035A(2)E225 5.3 6.0 225 856 770 342 1
35 15 X/7343-43 T495X156(1)035A(2)E250 5.3 6.0 250 812 731 325 1
35 15 X/7343-43 T495X156(1)035A(2)E260 5.3 6.0 260 797 717 319 1
35 15 X/7343-43 T495X156(1)035A(2)4095 5.3 6.0 225 856 770 342 1
35 22 D/7343-31 T495D226(1)035A(2)E125 7.7 6.0 125 1095 986 438 1
35 22 D/7343-31 T495D226(1)035A(2)E200 7.7 6.0 200 866 779 346 1
35 22 D/7343-31 T495D226(1)035A(2)E250 7.7 6.0 250 775 698 310 1
35 22 D/7343-31 T495D226(1)035A(2)E260 7.7 6.0 260 760 684 304 1
35 22 D/7343-31 T495D226(1)035A(2)E300 7.7 6.0 300 707 636 283 1
35 22 X/7343-43 T495X226(1)035A(2)E125 7.7 6.0 125 1149 1034 460 1
35 22 X/7343-43 T495X226(1)035A(2)E130 7.7 6.0 130 1127 1014 451 1
35 22 X/7343-43 T495X226(1)035A(2)E200 7.7 6.0 200 908 817 363 1
35 22 X/7343-43 T495X226(1)035A(2)E260 7.7 6.0 260 797 717 319 1
35 22 X/7343-43 T495X226(1)035A(2)E275 7.7 6.0 275 775 698 310 1
35 22 X/7343-43 T495X226(1)035A(2)4095 7.7 6.0 300 742 668 297 1
35 33 D/7343-31 T495D336(1)035A(2)E200 11.6 6.0 200 866 779 346 1
35 33 D/7343-31 T495D336(1)035A(2)E300 11.6 6.0 300 707 636 283 1
35 33 X/7343-43 T495X336(1)035A(2)E100 11.6 6.0 100 1285 1157 514 1
35 33 X/7343-43 T495X336(1)035A(2)E175 11.6 6.0 175 971 874 388 1
35 33 X/7343-43 T495X336(1)035A(2)E250 11.6 6.0 250 812 731 325 1
35 33 E/7360-38 T495E336(1)035A(2)E200 11.6 6.0 200 1000 900 400 1
35 47 X/7343-43 T495X476(1)035A(2)E185 16.5 8.0 185 944 850 378 1
35 47 X/7343-43 T495X476(1)035A(2)E200 16.5 8.0 200 908 817 363 1
35 47 X/7343-43 T495X476(1)035A(2)E230 16.5 8.0 230 847 762 339 1
35 47 X/7343-43 T495X476(1)035A(2)E300 16.5 8.0 300 742 668 297 1
50 1C/6032-28 T495C105(1)050A(2)E1K3 0.5 4.0 1300 291 262 116 1
50 1C/6032-28 T495C105(1)050A(2)E1K6 0.5 4.0 1600 262 236 105 1
50 2.2 D/7343-31 T495D225(1)050A(2)E600 1.1 6.0 600 500 450 200 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
35 6.8 C/6032-28 T495C685(1)035A(2)E1K8 2.4 6.0 1800 247 222 99 1
35 6.8 D/7343-31 T495D685(1)035A(2)E150 2.4 6.0 150 1000 900 400 1
35 6.8 D/7343-31 T495D685(1)035A(2)E300 2.4 6.0 300 707 636 283 1
35 6.8 D/7343-31 T495D685(1)035A(2)E400 2.4 6.0 400 612 551 245 1
35 6.8 X/7343-43 T495X685(1)035A(2)E300 2.4 4.0 300 742 668 297 1
35 6.8 X/7343-43 T495X685(1)035A(2)4095 2.4 4.0 300 742 668 297 1
35 10 D/7343-31 T495D106(1)035A(2)E120 3.5 4.0 120 1118 1006 447 1
35 10 D/7343-31 T495D106(1)035A(2)E125 3.5 6.0 125 1095 986 438 1
35 10 D/7343-31 T495D106(1)035A(2)E130 3.5 6.0 130 1074 967 430 1
35 10 D/7343-31 T495D106(1)035A(2)E250 3.5 6.0 250 775 698 310 1
35 10 D/7343-31 T495D106(1)035A(2)E260 3.5 6.0 260 760 684 304 1
35 10 D/7343-31 T495D106(1)035A(2)E300 3.5 6.0 300 707 636 283 1
35 10 D/7343-31 T495D106(1)035A(2)E1K0 3.5 6.0 1000 387 348 155 1
35 10 D/7343-31 T495D106(1)035A(2)4095 3.5 4.0 300 707 636 283 1
35 10 X/7343-43 T495X106(1)035A(2)E175 3.5 6.0 175 971 874 388 1
35 10 X/7343-43 T495X106(1)035A(2)E200 3.5 6.0 200 908 817 363 1
35 10 X/7343-43 T495X106(1)035A(2)E250 3.5 4.0 250 812 731 325 1
35 10 X/7343-43 T495X106(1)035A(2)E260 3.5 4.0 260 797 717 319 1
35 10 X/7343-43 T495X106(1)035A(2)4095 3.5 4.0 250 812 731 325 1
35 15 D/7343-31 T495D156(1)035A(2)E225 5.3 6.0 225 816 734 326 1
35 15 D/7343-31 T495D156(1)035A(2)E260 5.3 6.0 260 760 684 304 1
35 15 D/7343-31 T495D156(1)035A(2)E300 5.3 6.0 300 707 636 283 1
35 15 X/7343-43 T495X156(1)035A(2)E200 5.3 6.0 200 908 817 363 1
35 15 X/7343-43 T495X156(1)035A(2)E225 5.3 6.0 225 856 770 342 1
35 15 X/7343-43 T495X156(1)035A(2)E250 5.3 6.0 250 812 731 325 1
35 15 X/7343-43 T495X156(1)035A(2)E260 5.3 6.0 260 797 717 319 1
35 15 X/7343-43 T495X156(1)035A(2)4095 5.3 6.0 225 856 770 342 1
35 22 D/7343-31 T495D226(1)035A(2)E125 7.7 6.0 125 1095 986 438 1
35 22 D/7343-31 T495D226(1)035A(2)E200 7.7 6.0 200 866 779 346 1
35 22 D/7343-31 T495D226(1)035A(2)E250 7.7 6.0 250 775 698 310 1
35 22 D/7343-31 T495D226(1)035A(2)E260 7.7 6.0 260 760 684 304 1
35 22 D/7343-31 T495D226(1)035A(2)E300 7.7 6.0 300 707 636 283 1
35 22 X/7343-43 T495X226(1)035A(2)E125 7.7 6.0 125 1149 1034 460 1
35 22 X/7343-43 T495X226(1)035A(2)E130 7.7 6.0 130 1127 1014 451 1
35 22 X/7343-43 T495X226(1)035A(2)E200 7.7 6.0 200 908 817 363 1
35 22 X/7343-43 T495X226(1)035A(2)E260 7.7 6.0 260 797 717 319 1
35 22 X/7343-43 T495X226(1)035A(2)E275 7.7 6.0 275 775 698 310 1
35 22 X/7343-43 T495X226(1)035A(2)4095 7.7 6.0 300 742 668 297 1
35 33 D/7343-31 T495D336(1)035A(2)E200 11.6 6.0 200 866 779 346 1
35 33 D/7343-31 T495D336(1)035A(2)E300 11.6 6.0 300 707 636 283 1
35 33 X/7343-43 T495X336(1)035A(2)E100 11.6 6.0 100 1285 1157 514 1
35 33 X/7343-43 T495X336(1)035A(2)E175 11.6 6.0 175 971 874 388 1
35 33 X/7343-43 T495X336(1)035A(2)E250 11.6 6.0 250 812 731 325 1
35 33 E/7360-38 T495E336(1)035A(2)E200 11.6 6.0 200 1000 900 400 1
35 47 X/7343-43 T495X476(1)035A(2)E185 16.5 8.0 185 944 850 378 1
35 47 X/7343-43 T495X476(1)035A(2)E200 16.5 8.0 200 908 817 363 1
35 47 X/7343-43 T495X476(1)035A(2)E230 16.5 8.0 230 847 762 339 1
35 47 X/7343-43 T495X476(1)035A(2)E300 16.5 8.0 300 742 668 297 1
50 1C/6032-28 T495C105(1)050A(2)E1K3 0.5 4.0 1300 291 262 116 1
50 1C/6032-28 T495C105(1)050A(2)E1K6 0.5 4.0 1600 262 236 105 1
50 2.2 D/7343-31 T495D225(1)050A(2)E600 1.1 6.0 600 500 450 200 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 34
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1515
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
T495 X107 M010 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three digits
specify ESR in
mΩ. (45 = 45
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
50 3.3 D/7343-31 T495D335(1)050A(2)E700 1.7 6.0 700 463 417 185 1
50 4.7 D/7343-31 T495D475(1)050A(2)E275 2.4 6.0 275 739 665 296 1
50 4.7 D/7343-31 T495D475(1)050A(2)E300 2.4 6.0 300 707 636 283 1
50 4.7 X/7343-43 T495X475(1)050A(2)E300 2.4 4.0 300 742 668 297 1
50 4.7 X/7343-43 T495X475(1)050A(2)4095 2.4 4.0 300 742 668 297 1
50 6.8 D/7343-31 T495D685(1)050A(2)E190 3.4 6.0 190 889 800 356 1
50 6.8 D/7343-31 T495D685(1)050A(2)E200 3.4 6.0 200 866 779 346 1
50 6.8 D/7343-31 T495D685(1)050A(2)E275 3.4 6.0 275 739 665 296 1
50 6.8 D/7343-31 T495D685(1)050A(2)E300 3.4 8.0 300 707 636 283 1
50 6.8 D/7343-31 T495D685(1)050A(2)E400 3.4 6.0 400 612 551 245 1
50 10 X/7343-43 T495X106(1)050A(2)E250 5.0 8.0 250 812 731 325 1
50 10 X/7343-43 T495X106(1)050A(2)E260 5.0 6.0 260 797 717 319 1
50 10 X/7343-43 T495X106(1)050A(2)E300 5.0 6.0 300 742 668 297 1
50 15 X/7343-43 T495X156(1)050A(2)E200 7.5 8.0 200 908 817 363 1
50 15 X/7343-43 T495X156(1)050A(2)E250 7.5 6.0 250 812 731 325 1
50 15 X/7343-43 T495X156(1)050A(2)E300 7.5 8.0 300 742 668 297 1
VDC
µF
KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
50 3.3 D/7343-31 T495D335(1)050A(2)E700 1.7 6.0 700 463 417 185 1
50 4.7 D/7343-31 T495D475(1)050A(2)E275 2.4 6.0 275 739 665 296 1
50 4.7 D/7343-31 T495D475(1)050A(2)E300 2.4 6.0 300 707 636 283 1
50 4.7 X/7343-43 T495X475(1)050A(2)E300 2.4 4.0 300 742 668 297 1
50 4.7 X/7343-43 T495X475(1)050A(2)4095 2.4 4.0 300 742 668 297 1
50 6.8 D/7343-31 T495D685(1)050A(2)E190 3.4 6.0 190 889 800 356 1
50 6.8 D/7343-31 T495D685(1)050A(2)E200 3.4 6.0 200 866 779 346 1
50 6.8 D/7343-31 T495D685(1)050A(2)E275 3.4 6.0 275 739 665 296 1
50 6.8 D/7343-31 T495D685(1)050A(2)E300 3.4 8.0 300 707 636 283 1
50 6.8 D/7343-31 T495D685(1)050A(2)E400 3.4 6.0 400 612 551 245 1
50 10 X/7343-43 T495X106(1)050A(2)E250 5.0 8.0 250 812 731 325 1
50 10 X/7343-43 T495X106(1)050A(2)E260 5.0 6.0 260 797 717 319 1
50 10 X/7343-43 T495X106(1)050A(2)E300 5.0 6.0 300 742 668 297 1
50 15 X/7343-43 T495X156(1)050A(2)E200 7.5 8.0 200 908 817 363 1
50 15 X/7343-43 T495X156(1)050A(2)E250 7.5 6.0 250 812 731 325 1
50 15 X/7343-43 T495X156(1)050A(2)E300 7.5 8.0 300 742 668 297 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 35
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1616
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Recommended Voltage Derating Guidelines
-55°C to 85°C 85°C to 125°C
% Change in Working DC
Voltage with Temperature
VR67% of VR
Recommended Maximum
Application Voltage
50% of VR33% of VR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C
85°C
12C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
3216–18
75
B
352821
85
C
6032–28
110
D
734331
150
X
734343
165
E
7360–38
200
S
3216–12
60
T
3528–12
70
U
6032–15
90
V
7343–20
125
T510X
734343
270
T510E
7360–38
285
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 36
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1717
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identifi ed on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
12C
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 37
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1818
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profi le
conditions for convection and IR refl ow refl ect the profi le conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three refl ow
passes at these conditions.
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (T
Smax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 38
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2009_T495 8/5/2013 1919
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Capacitor Marking
C, D, X Case Sizes
KEMET
Surge
Robust
MnO2
Rated
Voltage
156
25 K
230
R+ Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1
st
digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fl uctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
KEMET
Industrial
Grade
MnO2
Rated
Voltage
156
25V
Polarity
Indicator (+)
Picofarad
Code
KEMET ID
Date
Code*
K
C6 49 Internal
Code
Date Code*
Year Month
X = 2009 1 = Jan 7 = Jul
A = 2010 2 = Feb 8 = Aug
B = 2011 3 = Mar 9 = Spt
C = 2012 4 = Apr O = Oct
D = 2013 5 = May N = Nov
E = 2014 6 = Jun D = Dec
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 39
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 1
One world. One KEMET
Bene ts
Meets or exceeds EIA Standard 535BAAC
Taped and reeled per EIA 481–1
High surge current capability
Optional gold-plated terminations
High ripple current capability
100% surge current test
100% steady-state accelerated aging
Capacitance values of 10 μF to 1,000 μF
Tolerances of ±10% and ±20%
Voltage rating of 4 to 50 VDC
Case sizes E and X
ESR as low as 18 mΩ
RoHS Compliant and lead-free terminations
Operating temperature range of -55˚C to +125˚C
Applications
Typical applications include decoupling and fi ltering in industrial
and automotive end applications, such as DC/DC converters,
portable electronics, telecommunications, and control units
requiring high ripple current capability.
Overview
The low ESR, surge-robust T510 Series is designed for
demanding applications that require high surge current and
high ripple current capability. This series builds upon the proven
capabilities of our industrial grade tantalum chip capacitors to
offer several advantages such as low ESR, high ripple current
capability, excellent capacitance stability, and improved resistance
to high in-rush currents. These benefi ts are achieved though the
utilization of multiple anodes as well as high-stress, low impedance
electrical conditioning performed prior to screening.
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T510 Multiple Anode Low ESR MnO2 Series
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 40
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 22
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Ordering Information
T510 X477 M006 A T E800
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Packaging
(C-Spec)
T =
Tantalum
Multiple
Anode
Low ESR
E, X First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
K = ±10%
M = ±20%
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
Z = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5%
Pb minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three
digits specify
ESR in mΩ.
(800 = 800
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 10 – 1,000 µF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 4 – 50 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 41
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 33
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Quali cation
Test Condition Characteristics
Endurance 85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C @ 0 volts, 2,000 hours
ΔC/C
Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MILSTD–202, Method 107, Condition B, mounted, -55C° to
125° C, 1,000 cycles
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +125ºC, +25ºC
+2C -55°C +85°C +125°C
ΔC/C IL* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
ΔC/C
Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 42
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 44
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Electrical Characteristics
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (μF)
Frequency (Hz)
T510X226M035ATE100
T510X336M035ATE065
T510E476M035ATE050
Capacitance vs. Frequency
Impedance, ESR vs. Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T510X226M035ATE100_IMP
T510X336M035ATE065_IMP
T510E476M035ATE050_IMP
T510X226M035ATE100_ESR
T510X336M035ATE065_ESR
T510E476M035ATE050_ESR
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
X7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
E7360–38
7.3 ±0.3
(0.287 ±0.012)
6.0±0.3
(0.236 ±0.012)
3.6 ±0.2
(0.142 ±0.008)
4.1 (.161) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com TC102_LOWESR 8/5/2013 43
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 55
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
≤ 260ºC
4680 X/7343-43 T510X687(1)004A(2)E030 27.2 6.0 30 3000 2700 1200 1
41000 X/7343-43 T510X108(1)004A(2)E018 40.0 6.0 18 3873 3486 1549 1
41000 X/7343-43 T510X108(1)004A(2)E023 40.0 6.0 23 3426 3083 1370 1
41000 E/7360-38 T510E108(1)004A(2)E018 40.0 6.0 18 3979 3581 1592 1
41000 E/7360-38 T510E108(1)004A(2)E010 40.0 6.0 10 5339 4805 2136 1
6.3 470 X/7343-43 T510X477(1)006A(2)E030 29.6 6.0 30 3000 2700 1200 1
6.3 680 X/7343-43 T510X687(1)006A(2)E023 42.8 6.0 23 3426 3083 1370 1
6.3 680 X/7343-43 T510X687(1)006A(2)E045 42.8 12.0 45 2449 2204 980 1
6.3 680 E/7360-38 T510E687(1)006A(2)E023 42.8 6.0 23 3520 3168 1408 1
6.3 680 E/7360-38 T510E687(1)006A(2)E012 42.8 6.0 12 4873 4386 1949 1
10 330 X/7343-43 T510X337(1)010A(2)E035 33.0 6.0 35 2777 2499 1111 1
16 150 X/7343-43 T510X157(1)016A(2)E030 24.0 6.0 30 3000 2700 1200 1
16 150 X/7343-43 T510X157(1)016A(2)E040 24.0 6.0 40 2598 2338 1039 1
16 220 X/7343-43 T510X227(1)016A(2)E040 35.2 10.0 40 2598 2338 1039 1
16 220 X/7343-43 T510X227(1)016A(2)E025 35.2 10.0 25 3286 2957 1314 1
20 100 X/7343-43 T510X107(1)020A(2)E035 20.0 8.0 35 2777 2499 1111 1
20 100 X/7343-43 T510X107(1)020A(2)E040 20.0 6.0 40 2598 2338 1039 1
20 100 X/7343-43 T510X107(1)020A(2)E045 20.0 6.0 45 2449 2204 980 1
25 68 X/7343-43 T510X686(1)025A(2)E045 17.0 8.0 45 2449 2204 980 1
25 100 E/7360-38 T510E107(1)025A(2)E050 25.0 8.0 50 2387 2148 955 1
35 22 X/7343-43 T510X226(1)035A(2)E100 7.7 6.0 100 1643 1479 657 1
35 22 X/7343-43 T510X226(1)035A(2)E080 7.7 6.0 80 1837 1653 735 1
35 22 X/7343-43 T510X226(1)035A(2)E060 7.7 6.0 60 2121 1909 848 1
35 33 X/7343-43 T510X336(1)035A(2)E065 11.6 6.0 65 2038 1834 815 1
35 33 X/7343-43 T510X336(1)035A(2)E050 11.6 6.0 50 2324 2092 930 1
35 47 X/7343-43 T510X476(1)035A(2)E055 16.5 8.0 55 2216 1994 886 1
35 47 X/7343-43 T510X476(1)035A(2)E065 16.5 8.0 65 2038 1834 815 1
35 47 E/7360-38 T510E476(1)035A(2)E050 16.5 8.0 50 2387 2148 955 1
50 10 X/7343-43 T510X106(1)050A(2)E120 5.0 8.0 120 1500 1350 600 1
50 10 X/7343-43 T510X106(1)050A(2)E090 5.0 8.0 90 1732 1559 693 1
50 22 X/7343-43 T510X226(1)050A(2)E100 11.0 8.0 100 1643 1479 657 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Re ow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum).
Designates Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
T510 X477 M006 A T E800
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
Multiple
Anode
Low ESR
E, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
Z = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5%
Pb minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three
digits specify
ESR in mΩ.
(800 = 800
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 44
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 66
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Recommended Voltage Derating Guidelines
-55°C to 85°C 85°C to 125°C
% Change in Working DC
Voltage with Temperature
VR67% of VR
Recommended Maximum
Application Voltage
50% of VR33% of VR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C
85°C
12C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
3216–18
75
B
352821
85
C
6032–28
110
D
734331
150
X
734343
165
E
7360–38
200
S
3216–12
60
T
3528–12
70
U
6032–15
90
V
7343–20
125
T510X
734343
270
T510E
7360–38
285
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 45
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 77
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identifi ed on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
12C
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R
2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 46
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 88
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profi le
conditions for convection and IR refl ow refl ect the profi le conditions
of the IPC/JSTD020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three refl ow
passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (T
Smax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 47
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2014_T510 8/5/2013 99
Tantalum Surface Mount Capacitors
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T510 Multiple Anode Low ESR MnO2 Series
Capacitor Marking
KEMET
Multiple
Anode
MnO2
Rated
Voltage
337
10 K
230
M+ Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1
st
digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fl uctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
KEMET
Multiple
Anode
MnO2
Rated
Voltage
337
10V
M+ Polarity
Indicator (+)
Picofarad
Code
KEMET ID
Date
Code*
K
C6 49 Internal
Code
Date Code*
Year Month
X = 2009 1 = Jan 7 = Jul
A = 2010 2 = Feb 8 = Aug
B = 2011 3 = Mar 9 = Spt
C = 2012 4 = Apr O = Oct
D = 2013 5 = May N = Nov
E = 2014 6 = Jun D = Dec
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 48
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 1
One world. One KEMET
Bene ts
High capacitance
Surface mountable
Capacitance values of 9.4 µF to 1980 µF
Capacitance can be custom specifi ed
Voltage ratings of 6 VDC to 50 VDC
High volumetric ef ciency
Ultra-low ESR
Surge capability
Weibull failure options B and C
Operating temperature range of -55˚C to +125˚C
Laser-marked case
Discrete components EIA standard case sizes (others available)
High Temperature lead attach material available (> 260°C)
Applications
Typical applications include decoupling and fi ltering in a variety of
market segments. The T493 COTS stack devices can be utilized
in military and aerospace applications. Other KEMET series
can be utilized in fi ltering and decoupling applications to service
various market segments.
Overview
The KEMET Tantalum Stacks MnO2 (TSM) Series is designed
to provide the highest capacitance/voltage ratings in surface
mount confi guration. KEMET’s T493 COTS Military/Aerospace
capacitors are utilized in stacks of 2,3,4,and 6 components
to achieve a broad range of capacitance and voltage ratings.
The T493 COTS series offers component level Weibull grad-
ing options, surge current testing options and standard, low,
and ultra-low ESR options. All component level lots of this series
are conditioned with MIL–PRF–55365 Group A testing. Stacking
confi gurations offer this high reliability product with custom capaci-
tance/voltage solutions and very low ESR options.
Note: Custom stacking solutions are available with other KEMET Tantalum
Surface Mount Series. Please contact KEMET Product Management for
availability.
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors
TSM Series MnO2
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 49
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 22
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
Ordering Information
TSM 2D 447 K10 A H 61 20 D493
Capacitor
Class Series Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material Surge ESR C-Spec 2
T =
Tantalum
Stacks
MnO2
Cathode
2C, 3C,
4C, 6C,
2D, 3D,
4D, 6D,
2X, 3X,
4X, 6X
First two digits
represent
signifi cant
gures. Third
digit speci es
number of
zeros.
K = ±10%
M = ±20%
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
B =
0.1%/1,000
hours
C =
0.01%/1,000
hours
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
C = Hot Solder
Dipped
B = Gold
Plated
T = 100% Tin
61 = None
62 = 10 Cycles
25°C After
Weibull
63 = 10 cycles,
-55°C and 85°C
After Weibull
64 = 10 cycles,
-55°C and 85°C
Before Weibull
Special CSPEC:
CECC
10 = ESR-
Standard
20 = ESR-Low
30 = ESR-
Ultra-low
Designates
discrete
component
series.
D493 =
T493
Note: These TSM Stacks are speci c to T493 COTS.
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 9.4 – 1980 μF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 6 – 50 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 50
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 33
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
Quali cation
Test
Condition
Characteristics
Endurance 85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock KEMET specifi ed test, mounted, -55C° to 125° C, 5 cycles
Δ C/C
Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Surge Voltage 85° C, 1.15 x rated voltage 1,000 cycles
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Surge Voltage 125° C, 0.77 x rated voltage 1,000 cycles
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Vibration MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 51
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 44
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
Dimensions – Millimeters (Inches)
Metric will govern
TSM2
KEMET 2 Component Stack Dimensions
Case
Code
L W H W2 H2 P
2C
6.5 ± 0.38
(.258 ± .015)
3.3 ± 0.2
(.130 ± .008)
5.3 ± 0.38
(.210 ± .015)
2.5 ± 0.2
(.100 ± .008)
4.5 ± 0.38
(.176 ± .015)
1.4 ± 0.38
(.055 ± .015)
2D
8.0 ± 0.38
(.315 ± .015)
4.4 ± 0.2
(.174 ± .008)
6.2 ± 0.38
(.245 ± .015)
3.0 ± 0.2
(.120 ± .008)
4.8 ± 0.38
(.192 ± .015)
1.9 ± 0.38
(.075 ± .015)
2X
8.0 ± 0.38
(.315 ± .015)
4.4 ± 0.2
(.174 ± .008)
8.9 ± 0.38
(.352 ± .015)
3.0 ± 0.2
(.120 ± .008)
6.9 ± 0.38
(.272 ± .015)
1.9 ± 0.38
(.075 ± .015)
TSM3
KEMET 3 Component Stack Dimensions
Case
Code
L W H W2 H2 P
3C
6.5 ± 0.38
(.258 ± .015)
3.3 ± 0.2
(.130 ± .008)
7.8 ± 0.38
(.310 ± .015)
2.5 ± 0.2
(.100 ± .008)
6.4 ± 0.38
(.252 ± .015)
1.4 ± 0.38
(.055 ± .015)
3D
8.0 ± 0.38
(.315 ± .015)
4.4 ± 0.2
(.174 ± .008)
9.2 ± 0.38
(365 ± .015)
3.0 ± 0.2
(.120 ± .008)
7.7 ± 0.38
(.304 ± .015)
1.9 ± 0.38
(.075 ± .015)
3X
8.0 ± 0.38
(.315 ± .015)
4.4 ± 0.2
(.174 ± .008)
13.3 ± 0.38
(.525 ± .015)
3.0 ± 0.2
(.120 ± .008)
11.0 ± 0.38
(.436 ± .015)
1.9 ± 0.38
(.075 ± .015)
TSM4
KEMET 4 Component Stack Dimensions
Case
Code
L W H W2 H2 P
4C
6.5 ± 0.38
(.258 ± .015)
6.6 ± 0.2
(.262 ± .008)
5.3 ± 0.38
(.210 ± .015)
5.8 ± 0.2
(.230 ± .008)
4.6 ± 0.38
(.180 ± .015)
1.4 ± 0.38
(.055 ± .015)
4D
8.0 ± 0.38
(.315 ± .015)
8.9 ± 0.2
(.350 ± .008)
6.2 ± 0.38
(245 ± .015)
7.4 ± 0.2
(.292 ± .008)
4.8 ± 0.38
(.192 ± .015)
1.9 ± 0.38
(.075 ± .015)
4X
8.0 ± 0.38
(.315 ± .015)
8.9 ± 0.2
(.350 ± .008)
8.9 ± 0.38
(.352 ± .015)
7.4 ± 0.2
(.292 ± .008)
6.9 ± 0.38
(.272 ± .015)
1.9 ± 0.38
(.075 ± .015)
TSM6
KEMET 6 Component Stack Dimensions
Case
Code
L W H W2 H2 P
6C
6.5 ± 0.38
(.258 ± .015)
6.6 ± 0.2
(.262 ± .008)
7.8 ± 0.38
(.310 ± .015)
5.8 ± 0.2
(.230 ± .008)
6.6 ± 0.38
(.260 ± .015)
1.4 ± 0.38
(.055 ± .015)
6D
8.0 ± 0.38
(.315 ± .015)
8.9 ± 0.2
(.350 ± .008)
9.2 ± 0.38
(365 ± .015)
7.4 ± 0.2
(.292 ± .008)
7.7 ± 0.38
(.304 ± .015)
1.9 ± 0.38
(.075 ± .015)
6X
8.0 ± 0.38
(.315 ± .015)
8.9 ± 0.2
(.350 ± .008)
13.3 ± 0.38
(.525 ± .015)
7.4 ± 0.2
(.292 ± .008)
11.0 ± 0.38
(.436 ± .015)
1.9 ± 0.38
(.075 ± .015)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 52
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 55
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
Capacitance and Rated Voltage Chart
Capacitance Rated Voltage
µF Code 6 V 10 V 16 V 20 V 25 V 35 V 50 V
9.4
945
2D
14
146
3D
19
196
4D
20
206
2C
2X
28
286
6D
30
306
2C
3C
3X
40
406
4C
4X
44
446
2C
2D
45
456
3C
60
606
4C
6C
6X
66
666
3C
3D
88
886
4C
4D
90
906
6C
94
946
2C
2D
132
137
6C
6D
136
137
2D
141
147
3C
3D
188
197
4C
4D
200
207
2C
204
207
3D
272
277
4D
282
287
6C
6D
300
307
3C
2D
400
407
4C
408
417
6D
440
447
2C
2D
450
457
3D
600
607
6C
4D
660
667
3C, 2D
3D, 2X
880
887
4C
4D
900
907
6D
990
997
3D
3X
1320
138
6C, 4D
6D, 4X
1980
208
6D
6X
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 53
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 66
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
TSM 2D 447 K10 A H 61 20 D493
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
C-Spec 2
T =
Tantalum
Stacks
MnO2
Cathode
2C, 3C,
4C, 6C,
2D, 3D,
4D, 6D,
2X, 3X,
4X, 6X
First two digits
represent
signi cant
gures. Third
digit speci es
number of
zeros.
K = ±10%
M = ±20%
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
B =
0.1%/1,000
hours
C =
0.01%/1,000
hours
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
C = Hot Solder
Dipped
B = Gold
Plated
T = 100% Tin
61 = None
62 = 10 Cycles
25°C After
Weibull
63 = 10 cycles,
-55°C and 85°C
After Weibull
64 = 10 cycles,
-55°C and 85°C
Before Weibull
Special CSPEC:
CECC
10 = ESR-
Standard
20 = ESR-Low
30 = ESR-
Ultra-low
Designates
discrete
component
series.
D493 =
T493
Table 1A – TSM2 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
6.3 440 2C TSM2C447(1)006(2)(3)(4)(5) 27.8 10 0.600 0.150 0.115 1
10 200 2C TSM2C207(1)010(2)(3)(4)(5) 20.0 80.600 0.150 NA 1
16 94 2C TSM2C946(1)016(2)(3)(4)(5) 15.0 60.600 0.250 0.175 1
20 44 2C TSM2C446(1)020(2)(3)(4)(5) 8.8 60.600 0.200 NA 1
25 30 2C TSM2C306(1)025(2)(3)(4)(5) 7.6 60.750 0.450 NA 1
35 20 2C TSM2C206(1)035(2)(3)(4)(5) 7.0 61.000 0.600 NA 1
6.3 660 2D TSM2D667(1)006(2)(3)(4)(5) 41.6 80.250 0.075 0.050 1
10 440 2D TSM2D447(1)010(2)(3)(4)(5) 44.0 80.250 0.100 0.040 1
16 300 2D TSM2D307(1)016(2)(3)(4)(5) 48.0 80.350 0.200 0.075 1
20 130 2D TSM2D137(1)020(2)(3)(4)(5) 27.2 80.350 0.100 0.075 1
25 94 2D TSM2D946(1)025(2)(3)(4)(5) 23.6 10 0.350 0.100 0.060 1
35 44 2D TSM2D446(1)035(2)(3)(4)(5) 15.4 60.350 0.200 0.100 1
50 9.4 2D TSM2D945(1)050(2)(3)(4)(5) 4.8 60.750 0.300 0.140 1
10 660 2X TSM2X667(1)010(2)(3)(4)(5) 66.0 10 0.250 0.050 0.025 1
50 20 2X TSM2X206(1)050(2)(3)(4)(5) 10.0 60.350 0.200 NA 1
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low ESR
Moisture
Sensitivity
Table 1B – TSM3 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
6.3 660 3C TSM3C667(1)006(2)(3)(4)(5) 41.7 10 0.400 0.100 0.077 1
10 300 3C TSM3C307(1)010(2)(3)(4)(5) 30.0 80.400 0.100 NA 1
16 140 3C TSM3C147(1)016(2)(3)(4)(5) 22.5 60.400 0.167 0.117 1
20 66 3C TSM3C666(1)020(2)(3)(4)(5) 13.2 60.400 0.133 NA 1
25 45 3C TSM3C456(1)025(2)(3)(4)(5) 11.4 60.500 0.300 NA 1
35 30 3C TSM3C306(1)035(2)(3)(4)(5) 10.5 60.667 0.400 NA 1
6.3 990 3D TSM3D997(1)006(2)(3)(4)(5) 62.4 80.167 0.050 0.033 1
10 660 3D TSM3D667(1)010(2)(3)(4)(5) 66.0 80.167 0.067 0.027 1
16 450 3D TSM3D457(1)016(2)(3)(4)(5) 72.0 80.233 0.133 0.050 1
20 200 3D TSM3D207(1)020(2)(3)(4)(5) 40.8 80.233 0.067 0.050 1
25 140 3D TSM3D147(1)025(2)(3)(4)(5) 35.4 10 0.233 0.067 0.040 1
35 66 3D TSM3D666(1)035(2)(3)(4)(5) 23.1 60.233 0.133 0.067 1
50 14 3D TSM3D146(1)050(2)(3)(4)(5) 7.2 60.500 0.200 0.093 1
10 990 3X TSM3X997(1)010(2)(3)(4)(5) 99.0 10 0.167 0.033 0.017 1
50 30 3X TSM3X306(1)050(2)(3)(4)(5) 15.0 60.233 0.133 NA 1
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low ESR
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
Table 1A – TSM2 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
6.3 440 2C TSM2C447(1)006(2)(3)(4)(5) 27.8 10 0.600 0.150 0.115 1
10 200 2C TSM2C207(1)010(2)(3)(4)(5) 20.0 80.600 0.150 NA 1
16 94 2C TSM2C946(1)016(2)(3)(4)(5) 15.0 60.600 0.250 0.175 1
20 44 2C TSM2C446(1)020(2)(3)(4)(5) 8.8 60.600 0.200 NA 1
25 30 2C TSM2C306(1)025(2)(3)(4)(5) 7.6 60.750 0.450 NA 1
35 20 2C TSM2C206(1)035(2)(3)(4)(5) 7.0 61.000 0.600 NA 1
6.3 660 2D TSM2D667(1)006(2)(3)(4)(5) 41.6 80.250 0.075 0.050 1
10 440 2D TSM2D447(1)010(2)(3)(4)(5) 44.0 80.250 0.100 0.040 1
16 300 2D TSM2D307(1)016(2)(3)(4)(5) 48.0 80.350 0.200 0.075 1
20 136 2D TSM2D137(1)020(2)(3)(4)(5) 27.2 80.350 0.100 0.075 1
25 94 2D TSM2D946(1)025(2)(3)(4)(5) 23.6 10 0.350 0.100 0.060 1
35 44 2D TSM2D446(1)035(2)(3)(4)(5) 15.4 60.350 0.200 0.100 1
50 9.4 2D TSM2D945(1)050(2)(3)(4)(5) 4.8 60.750 0.300 0.140 1
10 660 2X TSM2X667(1)010(2)(3)(4)(5) 66.0 10 0.250 0.050 0.025 1
50 20 2X TSM2X206(1)050(2)(3)(4)(5) 10.0 60.350 0.200 NA 1
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low ESR Moisture
Sensitivity
Table 1B – TSM3 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
6.3 660 3C TSM3C667(1)006(2)(3)(4)(5) 41.7 10 0.400 0.100 0.077 1
10 300 3C TSM3C307(1)010(2)(3)(4)(5) 30.0 80.400 0.100 NA 1
16 141 3C TSM3C147(1)016(2)(3)(4)(5) 22.5 60.400 0.167 0.117 1
20 66 3C TSM3C666(1)020(2)(3)(4)(5) 13.2 60.400 0.133 NA 1
25 45 3C TSM3C456(1)025(2)(3)(4)(5) 11.4 60.500 0.300 NA 1
35 30 3C TSM3C306(1)035(2)(3)(4)(5) 10.5 60.667 0.400 NA 1
6.3 990 3D TSM3D997(1)006(2)(3)(4)(5) 62.4 80.167 0.050 0.033 1
10 660 3D TSM3D667(1)010(2)(3)(4)(5) 66.0 80.167 0.067 0.027 1
16 450 3D TSM3D457(1)016(2)(3)(4)(5) 72.0 80.233 0.133 0.050 1
20 204 3D TSM3D207(1)020(2)(3)(4)(5) 40.8 80.233 0.067 0.050 1
25 141 3D TSM3D147(1)025(2)(3)(4)(5) 35.4 10 0.233 0.067 0.040 1
35 66 3D TSM3D666(1)035(2)(3)(4)(5) 23.1 60.233 0.133 0.067 1
50 14 3D TSM3D146(1)050(2)(3)(4)(5) 7.2 60.500 0.200 0.093 1
10 990 3X TSM3X997(1)010(2)(3)(4)(5) 99.0 10 0.167 0.033 0.017 1
50 30 3X TSM3X306(1)050(2)(3)(4)(5) 15.0 60.233 0.133 NA 1
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low ESR Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 54
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 77
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
TSM 2D 447 K10 A H 61 20 D493
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
C-Spec 2
T =
Tantalum
Stacks
MnO2
Cathode
2C, 3C,
4C, 6C,
2D, 3D,
4D, 6D,
2X, 3X,
4X, 6X
First two digits
represent
signi cant
gures. Third
digit speci es
number of
zeros.
K = ±10%
M = ±20%
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
B =
0.1%/1,000
hours
C =
0.01%/1,000
hours
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
C = Hot Solder
Dipped
B = Gold
Plated
T = 100% Tin
61 = None
62 = 10 Cycles
25°C After
Weibull
63 = 10 cycles,
-55°C and 85°C
After Weibull
64 = 10 cycles,
-55°C and 85°C
Before Weibull
Special CSPEC:
CECC
10 = ESR-
Standard
20 = ESR-Low
30 = ESR-
Ultra-low
Designates
discrete
component
series.
D493 =
T493
Table 1C – TSM4 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
6.3 880 4C TSM4C887(1)006(2)(3)(4)(5) 55.6 10 0.300 0.075 0.058 1
10 400 4C TSM4C407(1)010(2)(3)(4)(5) 40.0 80.300 0.075 NA 1
16 190 4C TSM4C197(1)016(2)(3)(4)(5) 30.0 60.300 0.125 0.088 1
20 88 4C TSM4C886(1)020(2)(3)(4)(5) 17.6 60.300 0.100 NA 1
25 60 4C TSM4C606(1)025(2)(3)(4)(5) 15.2 60.375 0.225 NA 1
35 40 4C TSM4C406(1)035(2)(3)(4)(5) 14.0 60.500 0.300 NA 1
6.3 1300 4D TSM4D138(1)006(2)(3)(4)(5) 83.2 80.125 0.038 0.025 1
10 880 4D TSM4D887(1)010(2)(3)(4)(5) 88.0 80.125 0.050 0.020 1
16 600 4D TSM4D607(1)016(2)(3)(4)(5) 96,0 80.175 0.100 0.038 1
20 270 4D TSM4D277(1)020(2)(3)(4)(5) 54.4 80.175 0.050 0.038 1
25 180 4D TSM4D187(1)025(2)(3)(4)(5) 47. 2 10 0.175 0.050 0.030 1
35 88 4D TSM4D886(1)035(2)(3)(4)(5) 30.8 60.175 0.100 0.050 1
50 19 4D TSM4D196(1)050(2)(3)(4)(5) 9.6 60.375 0.150 0.070 1
10 1300 4X TSM4X138(1)010(2)(3)(4)(5) 132.0 10 0.125 0.025 0.013 1
50 40 4X TSM4X406(1)050(2)(3)(4)(5) 20.0 60.175 0.100 NA 1
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low ESR
Moisture
Sensitivity
Table 1D – TSM6 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
6.3 1300 6C TSM6C138(1)006(2)(3)(4)(5) 83.4 10 0.200 0.050 0.038
10 600 6C TSM6C607(1)010(2)(3)(4)(5) 60.0 80.200 0.050 NA
16 280 6C TSM6C287(1)016(2)(3)(4)(5) 45.0 60.200 0.083 0.058
20 130 6C TSM6C137(1)020(2)(3)(4)(5) 26.4 60.200 0.067 NA
25 90 6C TSM6C906(1)025(2)(3)(4)(5) 22.8 60.250 0.150 NA
35 60 6C TSM6C606(1)035(2)(3)(4)(5) 21.0 60.333 0.200 NA
6.3 2000 6D TSM6D208(1)006(2)(3)(4)(5) 124.8 80.083 0.025 0.017
10 1300 6D TSM6D138(1)010(2)(3)(4)(5) 132.0 80.083 0.033 0.013
16 900 6D TSM6D907(1)016(2)(3)(4)(5) 144.0 80.117 0.067 0.025
20 410 6D TSM6D417(1)020(2)(3)(4)(5) 81.6 80.117 0.033 0.025
25 280 6D TSM6D287(1)025(2)(3)(4)(5) 70.8 10 0.117 0.033 0.020
35 130 6D TSM6D137(1)035(2)(3)(4)(5) 46.2 60.117 0.067 0.033
50 28 6D TSM6D286(1)050(2)(3)(4)(5) 14.4 60.250 0.100 0.047
10 2000 6X TSM6X208(1)010(2)(3)(4)(5) 198.0 10 0.083 0.017 0.008
50 60 6X TSM6X606(1)050(2)(3)(4)(5) 30.0 60.117 0.067 NA
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard
ESR
Low ESR
Ultra-low ESR
Moisture
Sensitivity
1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
Table 1C – TSM4 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
6.3 880 4C TSM4C887(1)006(2)(3)(4)(5) 55.6 10 0.300 0.075 0.058 1
10 400 4C TSM4C407(1)010(2)(3)(4)(5) 40.0 80.300 0.075 NA 1
16 188 4C TSM4C197(1)016(2)(3)(4)(5) 30.0 60.300 0.125 0.088 1
20 88 4C TSM4C886(1)020(2)(3)(4)(5) 17.6 60.300 0.100 NA 1
25 60 4C TSM4C606(1)025(2)(3)(4)(5) 15.2 60.375 0.225 NA 1
35 40 4C TSM4C406(1)035(2)(3)(4)(5) 14.0 60.500 0.300 NA 1
6.3 1320 4D TSM4D138(1)006(2)(3)(4)(5) 83.2 80.125 0.038 0.025 1
10 880 4D TSM4D887(1)010(2)(3)(4)(5) 88.0 80.125 0.050 0.020 1
16 600 4D TSM4D607(1)016(2)(3)(4)(5) 96,0 80.175 0.100 0.038 1
20 272 4D TSM4D277(1)020(2)(3)(4)(5) 54.4 80.175 0.050 0.038 1
25 188 4D TSM4D187(1)025(2)(3)(4)(5) 47. 2 10 0.175 0.050 0.030 1
35 88 4D TSM4D886(1)035(2)(3)(4)(5) 30.8 60.175 0.100 0.050 1
50 19 4D TSM4D196(1)050(2)(3)(4)(5) 9.6 60.375 0.150 0.070 1
10 1320 4X TSM4X138(1)010(2)(3)(4)(5) 132.0 10 0.125 0.025 0.013 1
50 40 4X TSM4X406(1)050(2)(3)(4)(5) 20.0 60.175 0.100 NA 1
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low ESR Moisture
Sensitivity
Table 1D – TSM6 Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF Standard
ESR
Low
ESR
Ultra-low
ESR
Moisture
Sensitivity
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
6.3 1320 6C TSM6C138(1)006(2)(3)(4)(5) 83.4 10 0.200 0.050 0.038
10 600 6C TSM6C607(1)010(2)(3)(4)(5) 60.0 80.200 0.050 NA
16 282 6C TSM6C287(1)016(2)(3)(4)(5) 45.0 60.200 0.083 0.058
20 132 6C TSM6C137(1)020(2)(3)(4)(5) 26.4 60.200 0.067 NA
25 90 6C TSM6C906(1)025(2)(3)(4)(5) 22.8 60.250 0.150 NA
35 60 6C TSM6C606(1)035(2)(3)(4)(5) 21.0 60.333 0.200 NA
6.3 1980 6D TSM6D208(1)006(2)(3)(4)(5) 124.8 80.083 0.025 0.017
10 1320 6D TSM6D138(1)010(2)(3)(4)(5) 132.0 80.083 0.033 0.013
16 900 6D TSM6D907(1)016(2)(3)(4)(5) 144.0 80.117 0.067 0.025
20 408 6D TSM6D417(1)020(2)(3)(4)(5) 81.6 80.117 0.033 0.025
25 282 6D TSM6D287(1)025(2)(3)(4)(5) 70.8 10 0.117 0.033 0.020
35 132 6D TSM6D137(1)035(2)(3)(4)(5) 46.2 60.117 0.067 0.033
50 28 6D TSM6D286(1)050(2)(3)(4)(5) 14.4 60.250 0.100 0.047
10 1980 6X TSM6X208(1)010(2)(3)(4)(5) 198.0 10 0.083 0.017 0.008
50 60 6X TSM6X606(1)050(2)(3)(4)(5) 30.0 60.117 0.067 NA
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Ω @ +20ºC
100 kHz Max
Temperature
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR Ultra-low ESR Moisture
Sensitivity
1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull or 64 = 10 cycles -55°C +85°C before
Weibull. Designates Surge current option.
(5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 55
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 88
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
Recommended Voltage Derating Guidelines
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identifi ed on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
12C
1% of Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 56
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 99
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
Table 2 – Land Dimensions/Courtyard
KEMET
Density Level A:
Maximum (Most) Land Protrusion
(mm)
Density Level B:
Median (Nominal) Land Protrusion
(mm)
Density Level C:
Minimum (Least) Land Protrusion
(mm)
Case
L
W
S
V1
V2
L
W
S
V1
V2
L
W
S
V1
V2
TSM2C
2.98
2.74
2.53
9.50
4.50
2.58
2.62
2.73
8.40
4.00
2.20
2.52
2.89
7.5 4
3.74
TSM2D
3.48
3.24
3.03
11.00
5.60
3.08
3.12
3.23
9.90
5.10
2.70
3.02
3.39
9.04
4.84
TSM2X
3.48
3.24
3.03
11.00
5.60
3.08
3.12
3.23
9.90
5.10
2.70
3.02
3.39
9.04
4.84
TSM3C
2.98
2.74
2.53
9.50
4.50
2.58
2.62
2.73
8.40
4.00
2.20
2.52
2.89
7.5 4
3.74
TSM3D
3.48
3.24
3.03
11.00
5.60
3.08
3.12
3.23
9.90
5.10
2.70
3.02
3.39
9.04
4.84
TSM3X
3.48
3.24
3.03
11.00
5.60
3.08
3.12
3.23
9.90
5.10
2.70
3.02
3.39
9.04
4.84
TSM4C
2.98
6.04
2.53
9.50
7.8 0
2.58
5.92
2.73
8.40
7.30
2.20
5.82
2.89
7.5 4
7.04
TSM4D
3.48
7.64
3.03
11.00
10.10
3.08
7.52
3.23
9.90
9.60
2.70
7.42
3.39
9.04
9.34
TSM4X
3.48
7.64
3.03
11.00
10.10
3.08
7.52
3.23
9.90
9.60
2.70
7.42
3.39
9.04
9.34
TSM6C
2.98
6.04
2.53
9.50
7.8 0
2.58
5.92
2.73
8.40
7.30
2.20
5.82
2.89
7.5 4
7.04
TSM6D
3.48
7.64
3.03
11.00
10.10
3.08
7.52
3.23
9.90
9.60
2.70
7.42
3.39
9.04
9.34
TSM6X
3.48
7.64
3.03
11.00
10.10
3.08
7.52
3.23
9.90
9.60
2.70
7.42
3.39
9.04
9.34
Density Level A: For low-density Product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC-7351).
¹ Height of these chips may create problems in wave soldering.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 57
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2021_TSM 8/5/2013 1010
Stack MnO2 Tantalum & Aluminum Surface Mount Capacitors – TSM Series MnO2
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profi le
conditions for convection and IR refl ow refl ect the profi le conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three refl ow
passes at these conditions.
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (T
Smax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Reference
Name
Material
A Lead frame BeCu Alloy 190
B Lead frame Attach High Temperature Solder
CLead Termination Solder Coated Alloy 752
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 58
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 8/5/2013 1
One world. One KEMET
Bene ts
Extremely low ESR
-55°C to 105°C operating temperature range
Polymer cathode technology
High frequency capacitance retention
Non-ignition failure mode
Capacitance up to 1,500 µF
100% accelerated steady state aging
100% surge current tested
Taped and reeled per EIA 481–1
Volumetric effi ciency
Self-healing mechanism
EIA standard case sizes
Applications
Typical applications include DC/DC converters, notebook PCs,
portable electronics, telecommunications (mobile phone and base
station), displays, SSD, HDD and USB.
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum
capacitor with a Ta anode and Ta2O5 dielectric. A conductive
organic polymer replaces the traditionally used MnO2 as the
cathode plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-
CAP also exhibits a benign failure mode which eliminates the
ignition failures that can occur in standard MnO2 tantalum types.
KO-CAPs may also be operated at steady state voltages up to
90% of rated voltage for part types with rated voltages of ≤ 10
volts and up to 80% of rated voltage for part types > 10 volts
with equivalent or better reliability than traditional MnO2 tantalum
capacitors operated at 50% of rated voltage.
The T520 Series KO-CAP Low ESR Polymer captures the
best features of multilayer ceramic (low ESR, high frequency
capacitance retention), aluminum electrolytic (higher capacitance,
benign failure mode), and proven solid tantalum technology
(volumetric effi ciency, surface mount capability, extremely long
life). The T520 can reduce component counts, eliminate through-
hole assembly by replacing cumbersome leaded aluminum
capacitors, and offer a cost-effective and space-saving solution.
KEMET Organic Capacitor (KO-CAP)
T520 Series Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 59
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T520 V157 M006 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signifi cant
gures. Third digit
specifi es number
of zeros.
M = ±20% 2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 105°C
Rated Capacitance Range 10 – 1,500 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 2.5 – 25 V
DF (120 Hz) ≤ 10%
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (μA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 60
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Quali cation
Test Condition Characteristics
Endurance 105°C @ rated voltage, 2,000 hours
Δ C/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Storage Life 105°C @ 0 volts, 2,000 hours
Δ C/C
Within -20%/+10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Humidity 60°C, 90% RH, 1,000 hours
Δ C/C Within -5%/+35% of initial value
DF Within initial limits
DCL Within 5.0 x initial limit
ESR Within 2.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +105ºC, +25ºC
+2C -55°C +85°C +105°C
Δ C/C IL* ±20% ±20% ±30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105°C, 1.32 x rated voltage, 1,000 cycles
Δ C/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak.
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 61
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Electrical Characteristics
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T520B157M006ATE035
T520C227M006ATE025
T520V337M006ATE015
T520D337M006ATE009
Capacitance vs. Frequency
ESR vs. Frequency
0.001
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance,ESR (Ohms)
Frequency (Hz)
T520B157M006ATE035_Imp
T520C227M006ATE025_Imp
T520V337M006ATE015_Imp
T520D337M006ATE009_Imp
T520B157M006ATE035_ESR
T520C227M006ATE025_ESR
T520V337M006ATE015_ESR
T520D337M006ATE009_ESR
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(0.004)
S* ±0.3
±(0.012)
B* ±0.15
(Ref) ±0.006
X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216–18
3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
B352821
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.9 ± 0.2
(0.075 ±0.008)
2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
C6032–28
6.0 ±0.3
(0.236 ±0.03)
3.2 ±0.3
(0.126 ±0.012)
2.5 ±0.3
(0.098 ±0.012)
2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
D734331
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
H7360–20
7.3 ±0.3
(0.287 ±0.012)
6.0±0.3
(0.236 ±0.012)
2.0 (0.078)
Maximum
4.1 (.161) 1.3 (.051) n/a
0.10 ± 0.10
(.004 ± .004)
n/a n/a 0.13 (.005) 3.3 (.130) 3.5 (.138) 3.5 (.138)
L6032–19
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.2
(0.110 ±0.008)
1.9 (0.075) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
M3528–15
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.5 (0.059) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
T3528–12
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.2 (0.047) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
U6032–15
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.2
(0.110 ±0.008)
1.5 (0.059) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
V7343–19
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.9 (0.075) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
W7343–15
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.5 (0.059) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Y734340
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 (0.157) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 62
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
2470 V/7343-19 T520V477M002A(1)E040 94 10 40 2200 3105
2.5 47 A/3216-18 T520A476M2R5A(1)E090 12 890 1100 3105
2.5 56 T/3528-12 T520T566M2R5A(1)E040 14 840 1600 3105
2.5 56 T/3528-12 T520T566M2R5A(1)E070 14 870 1200 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E070 17 870 1300 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E080 17 880 1200 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E040 25 840 1600 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E070 25 870 1200 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E025 25 825 2300 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E035 25 835 1900 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E040 25 840 1800 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E070 25 870 1300 3105
2.5 150 U/6032-15 T520U157M2R5A(1)E055 38 855 1600 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E015 55 815 2900 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E018 55 818 2700 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E021 55 821 2500 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E025 55 825 2300 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E030 55 830 2100 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E035 55 835 1900 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E055 55 855 1500 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E070 55 870 1300 3105
2.5 220 T/3528-12 T520T227M2R5A(1)E070 55 10 70 1225 3105
2.5 220 U/6032-15 T520U227M2R5A(1)E055 55 855 1600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E025 55 825 2600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E045 55 845 1900 3105
2.5 220 W/7343-15 T520W227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E006 55 10 65600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E007 55 10 75200 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E009 55 10 94600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E012 55 10 12 3900 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E015 55 10 15 3500 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E045 55 10 45 2000 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E007 55 10 75700 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E040 55 10 40 2400 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E012 83 812 2700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E015 83 815 2900 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E018 83 818 2700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E035 83 835 1900 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E045 83 845 1700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E070 83 870 1300 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E015 83 815 3300 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E018 83 818 3000 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E025 83 825 2600 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E045 83 845 1900 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E009 83 8 9 4100 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E012 83 812 3500 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E025 83 825 2400 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E015 83 10 15 3500 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E025 83 10 25 2700 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E040 83 10 40 2100 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
2470 V/7343-19 T520V477M002A(1)E040 94 10 40 2200 3105
2.5 47 A/3216-18 T520A476M2R5A(1)E090 12 890 1100 3105
2.5 56 T/3528-12 T520T566M2R5A(1)E040 14 840 1600 3105
2.5 56 T/3528-12 T520T566M2R5A(1)E070 14 870 1200 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E070 17 870 1300 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E080 17 880 1200 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E040 25 840 1600 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E070 25 870 1200 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E025 25 825 2300 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E035 25 835 1900 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E040 25 840 1800 3105
2.5 100 B/3528-21 T520B107M2R5A(1)E070 25 870 1300 3105
2.5 150 U/6032-15 T520U157M2R5A(1)E055 38 855 1600 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E015 55 815 2900 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E018 55 818 2700 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E021 55 821 2500 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E025 55 825 2300 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E030 55 830 2100 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E035 55 835 1900 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E055 55 855 1500 3105
2.5 220 B/3528-21 T520B227M2R5A(1)E070 55 870 1300 3105
2.5 220 T/3528-12 T520T227M2R5A(1)E070 55 10 70 1225 3105
2.5 220 U/6032-15 T520U227M2R5A(1)E055 55 855 1600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E025 55 825 2600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E045 55 845 1900 3105
2.5 220 W/7343-15 T520W227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E006 55 10 65600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E007 55 10 75200 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E009 55 10 94600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E012 55 10 12 3900 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E015 55 10 15 3500 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E045 55 10 45 2000 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E007 55 10 75700 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E040 55 10 40 2400 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E012 83 812 2700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E015 83 815 2900 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E018 83 818 2700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E035 83 835 1900 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E045 83 845 1700 3105
2.5 330 B/3528-21 T520B337M2R5A(1)E070 83 870 1300 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E015 83 815 3300 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E018 83 818 3000 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E025 83 825 2600 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E045 83 845 1900 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E009 83 8 9 4100 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E012 83 812 3500 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E025 83 825 2400 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E015 83 10 15 3500 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E025 83 10 25 2700 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E040 83 10 40 2100 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 63
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
2.5 330 V/7343-19 T520V337M2R5A(1)E006 83 10 65600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E007 83 10 75200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E009 83 10 94600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E012 83 10 12 3900 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E015 83 10 15 3500 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E018 83 10 18 3200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E025 83 10 25 2700 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E040 83 10 40 2200 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E006 83 10 66100 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E007 83 10 75700 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E007 118 10 75200 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E009 118 10 94600 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E012 118 10 12 3900 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E015 118 10 15 3500 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E018 118 10 18 3200 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E025 118 825 2600 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E045 118 845 1900 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E006 118 10 66100 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E007 118 10 75700 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E009 118 10 95000 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E010 170 10 10 4700 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E015 170 10 15 3900 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E040 170 10 40 2400 3105
2.5 680 Y/7343-40 T520Y687M2R5A(1)E015 170 10 15 4000 3105
2.5 680 Y/7343-40 T520Y687M2R5A(1)E025 170 10 25 3100 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E015 250 10 15 3900 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E030 250 10 30 2700 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E010 250 10 10 4900 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E015 250 10 15 4000 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E025 250 10 25 3100 3105
2.5 1000 X/7343-43 T520X108M2R5A(1)E010 250 10 10 5000 3105
3100 B/3528-21 T520B107M003A(1)E025 30 825 2300 3105
3100 B/3528-21 T520B107M003A(1)E035 30 835 1900 3105
3100 B/3528-21 T520B107M003A(1)E040 30 840 1800 3105
3100 B/3528-21 T520B107M003A(1)E070 30 870 1300 3105
3150 B/3528-21 T520B157M003A(1)E025 45 825 2300 3105
3150 B/3528-21 T520B157M003A(1)E035 45 835 1900 3105
3150 B/3528-21 T520B157M003A(1)E040 45 840 1800 3105
3150 B/3528-21 T520B157M003A(1)E070 45 870 1300 3105
3330 V/7343-19 T520V337M003A(1)E009 99 10 94600 3105
3330 V/7343-19 T520V337M003A(1)E012 99 10 12 3900 3105
3330 V/7343-19 T520V337M003A(1)E015 99 10 15 3500 3105
3330 V/7343-19 T520V337M003A(1)E025 99 10 25 2700 3105
3680 D/7343-31 T520D687M003A(1)E015 204 10 15 3900 3105
3680 D/7343-31 T520D687M003A(1)E040 204 10 40 2400 3105
31000 X/7343-43 T520X108M003A(1)E015 300 10 15 4100 3105
31000 X/7343-43 T520X108M003A(1)E030 300 10 30 2900 3105
415 T/3528-12 T520T156M004A(1)E100 6 8 100 1000 3105
433 A/3216-18 T520A336M004A(1)E070 13 870 1300 3105
433 A/3216-18 T520A336M004A(1)E080 13 880 1200 3105
447 A/3216-18 T520A476M004A(1)E070 19 870 1300 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
2.5 330 V/7343-19 T520V337M2R5A(1)E006 83 10 65600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E007 83 10 75200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E009 83 10 94600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E012 83 10 12 3900 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E015 83 10 15 3500 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E018 83 10 18 3200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E025 83 10 25 2700 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E040 83 10 40 2200 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E006 83 10 66100 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E007 83 10 75700 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E007 118 10 75200 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E009 118 10 94600 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E012 118 10 12 3900 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E015 118 10 15 3500 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E018 118 10 18 3200 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E025 118 825 2600 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E045 118 845 1900 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E006 118 10 66100 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E007 118 10 75700 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E009 118 10 95000 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E010 170 10 10 4700 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E015 170 10 15 3900 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E040 170 10 40 2400 3105
2.5 680 Y/7343-40 T520Y687M2R5A(1)E015 170 10 15 4000 3105
2.5 680 Y/7343-40 T520Y687M2R5A(1)E025 170 10 25 3100 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E015 250 10 15 3900 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E030 250 10 30 2700 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E010 250 10 10 4900 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E015 250 10 15 4000 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E025 250 10 25 3100 3105
2.5 1000 X/7343-43 T520X108M2R5A(1)E010 250 10 10 5000 3105
3100 B/3528-21 T520B107M003A(1)E025 30 825 2300 3105
3100 B/3528-21 T520B107M003A(1)E035 30 835 1900 3105
3100 B/3528-21 T520B107M003A(1)E040 30 840 1800 3105
3100 B/3528-21 T520B107M003A(1)E070 30 870 1300 3105
3150 B/3528-21 T520B157M003A(1)E025 45 825 2300 3105
3150 B/3528-21 T520B157M003A(1)E035 45 835 1900 3105
3150 B/3528-21 T520B157M003A(1)E040 45 840 1800 3105
3150 B/3528-21 T520B157M003A(1)E070 45 870 1300 3105
3330 V/7343-19 T520V337M003A(1)E009 99 10 94600 3105
3330 V/7343-19 T520V337M003A(1)E012 99 10 12 3900 3105
3330 V/7343-19 T520V337M003A(1)E015 99 10 15 3500 3105
3330 V/7343-19 T520V337M003A(1)E025 99 10 25 2700 3105
3680 D/7343-31 T520D687M003A(1)E015 204 10 15 3900 3105
3680 D/7343-31 T520D687M003A(1)E040 204 10 40 2400 3105
31000 X/7343-43 T520X108M003A(1)E015 300 10 15 4100 3105
31000 X/7343-43 T520X108M003A(1)E030 300 10 30 2900 3105
415 T/3528-12 T520T156M004A(1)E100 6 8 100 1000 3105
433 A/3216-18 T520A336M004A(1)E070 13 870 1300 3105
433 A/3216-18 T520A336M004A(1)E080 13 880 1200 3105
447 A/3216-18 T520A476M004A(1)E070 19 870 1300 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 64
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
447 A/3216-18 T520A476M004A(1)E080 19 880 1200 3105
447 T/3528-12 T520T476M004A(1)E070 19 870 1200 3105
468 T/3528-12 T520T686M004A(1)E070 27 870 1200 3105
468 B/3528-21 T520B686M004A(1)E025 27 825 2300 3105
468 B/3528-21 T520B686M004A(1)E035 27 835 1900 3105
468 B/3528-21 T520B686M004A(1)E040 27 840 1800 3105
468 B/3528-21 T520B686M004A(1)E070 27 870 1300 3105
468 U/6032-15 T520U686M004A(1)E055 27 855 1600 3105
4100 A/3216-18 T520A107M004A(1)E150 40 8150 900 3105
4100 A/3216-18 T520A107M004A(1)E200 40 8200 700 3105
4100 T/3528-12 T520T107M004A(1)E070 40 870 1200 3105
4100 T/3528-12 T520T107M004A(1)E150 40 8150 800 3105
4100 B/3528-21 T520B107M004A(1)E025 40 825 2300 3105
4100 B/3528-21 T520B107M004A(1)E035 40 835 1900 3105
4100 B/3528-21 T520B107M004A(1)E040 40 840 1800 3105
4100 B/3528-21 T520B107M004A(1)E070 40 870 1300 3105
4100 U/6032-15 T520U107M004A(1)E055 40 855 1600 3105
4150 B/3528-21 T520B157M004A(1)E015 60 815 2900 3105
4150 B/3528-21 T520B157M004A(1)E018 60 818 2700 3105
4150 B/3528-21 T520B157M004A(1)E025 60 825 2300 3105
4150 B/3528-21 T520B157M004A(1)E030 60 830 2100 3105
4150 B/3528-21 T520B157M004A(1)E035 60 835 1900 3105
4150 B/3528-21 T520B157M004A(1)E040 60 840 1800 3105
4150 B/3528-21 T520B157M004A(1)E070 60 870 1300 3105
4150 U/6032-15 T520U157M004A(1)E055 60 855 1600 3105
4150 C/6032-28 T520C157M004A(1)E015 60 815 3300 3105
4150 C/6032-28 T520C157M004A(1)E025 60 825 2600 3105
4150 C/6032-28 T520C157M004A(1)E045 60 845 1900 3105
4150 C/6032-28 T520C157M004A(1)E100 60 8100 1300 3105
4150 V/7343-19 T520V157M004A(1)E007 60 10 75200 3105
4150 V/7343-19 T520V157M004A(1)E009 60 10 94600 3105
4150 V/7343-19 T520V157M004A(1)E012 60 10 12 3900 3105
4150 V/7343-19 T520V157M004A(1)E015 60 10 15 3500 3105
4150 V/7343-19 T520V157M004A(1)E025 60 10 25 2700 3105
4150 D/7343-31 T520D157M004A(1)E007 60 10 75700 3105
4220 B/3528-21 T520B227M004A(1)E035 88 835 1900 3105
4220 B/3528-21 T520B227M004A(1)E045 88 845 1700 3105
4220 B/3528-21 T520B227M004A(1)E070 88 870 1300 3105
4220 C/6032-28 T520C227M004A(1)E015 88 815 3300 3105
4220 C/6032-28 T520C227M004A(1)E018 88 818 3000 3105
4220 C/6032-28 T520C227M004A(1)E025 88 825 2600 3105
4220 C/6032-28 T520C227M004A(1)E045 88 845 1900 3105
4220 C/6032-28 T520C227M004A(1)E055 88 855 1700 3105
4220 L/6032-19 T520L227M004A(1)E012 88 812 3500 3105
4220 L/6032-19 T520L227M004A(1)E025 88 825 2400 3105
4220 W/7343-15 T520W227M004A(1)E025 88 10 25 2700 3105
4220 W/7343-15 T520W227M004A(1)E040 88 10 40 2100 3105
4220 V/7343-19 T520V227M004A(1)E006 88 10 65600 3105
4220 V/7343-19 T520V227M004A(1)E007 88 10 75200 3105
4220 V/7343-19 T520V227M004A(1)E009 88 10 94600 3105
4220 V/7343-19 T520V227M004A(1)E012 88 10 12 3900 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
447 A/3216-18 T520A476M004A(1)E080 19 880 1200 3105
447 T/3528-12 T520T476M004A(1)E070 19 870 1200 3105
468 T/3528-12 T520T686M004A(1)E070 27 870 1200 3105
468 B/3528-21 T520B686M004A(1)E025 27 825 2300 3105
468 B/3528-21 T520B686M004A(1)E035 27 835 1900 3105
468 B/3528-21 T520B686M004A(1)E040 27 840 1800 3105
468 B/3528-21 T520B686M004A(1)E070 27 870 1300 3105
468 U/6032-15 T520U686M004A(1)E055 27 855 1600 3105
4100 A/3216-18 T520A107M004A(1)E150 40 8150 900 3105
4100 A/3216-18 T520A107M004A(1)E200 40 8200 700 3105
4100 T/3528-12 T520T107M004A(1)E070 40 870 1200 3105
4100 T/3528-12 T520T107M004A(1)E150 40 8150 800 3105
4100 B/3528-21 T520B107M004A(1)E025 40 825 2300 3105
4100 B/3528-21 T520B107M004A(1)E035 40 835 1900 3105
4100 B/3528-21 T520B107M004A(1)E040 40 840 1800 3105
4100 B/3528-21 T520B107M004A(1)E070 40 870 1300 3105
4100 U/6032-15 T520U107M004A(1)E055 40 855 1600 3105
4150 B/3528-21 T520B157M004A(1)E015 60 815 2900 3105
4150 B/3528-21 T520B157M004A(1)E018 60 818 2700 3105
4150 B/3528-21 T520B157M004A(1)E025 60 825 2300 3105
4150 B/3528-21 T520B157M004A(1)E030 60 830 2100 3105
4150 B/3528-21 T520B157M004A(1)E035 60 835 1900 3105
4150 B/3528-21 T520B157M004A(1)E040 60 840 1800 3105
4150 B/3528-21 T520B157M004A(1)E070 60 870 1300 3105
4150 U/6032-15 T520U157M004A(1)E055 60 855 1600 3105
4150 C/6032-28 T520C157M004A(1)E015 60 815 3300 3105
4150 C/6032-28 T520C157M004A(1)E025 60 825 2600 3105
4150 C/6032-28 T520C157M004A(1)E045 60 845 1900 3105
4150 C/6032-28 T520C157M004A(1)E100 60 8100 1300 3105
4150 V/7343-19 T520V157M004A(1)E007 60 10 75200 3105
4150 V/7343-19 T520V157M004A(1)E009 60 10 94600 3105
4150 V/7343-19 T520V157M004A(1)E012 60 10 12 3900 3105
4150 V/7343-19 T520V157M004A(1)E015 60 10 15 3500 3105
4150 V/7343-19 T520V157M004A(1)E025 60 10 25 2700 3105
4150 D/7343-31 T520D157M004A(1)E007 60 10 75700 3105
4220 B/3528-21 T520B227M004A(1)E035 88 835 1900 3105
4220 B/3528-21 T520B227M004A(1)E045 88 845 1700 3105
4220 B/3528-21 T520B227M004A(1)E070 88 870 1300 3105
4220 C/6032-28 T520C227M004A(1)E015 88 815 3300 3105
4220 C/6032-28 T520C227M004A(1)E018 88 818 3000 3105
4220 C/6032-28 T520C227M004A(1)E025 88 825 2600 3105
4220 C/6032-28 T520C227M004A(1)E045 88 845 1900 3105
4220 C/6032-28 T520C227M004A(1)E055 88 855 1700 3105
4220 L/6032-19 T520L227M004A(1)E012 88 812 3500 3105
4220 L/6032-19 T520L227M004A(1)E025 88 825 2400 3105
4220 W/7343-15 T520W227M004A(1)E025 88 10 25 2700 3105
4220 W/7343-15 T520W227M004A(1)E040 88 10 40 2100 3105
4220 V/7343-19 T520V227M004A(1)E006 88 10 65600 3105
4220 V/7343-19 T520V227M004A(1)E007 88 10 75200 3105
4220 V/7343-19 T520V227M004A(1)E009 88 10 94600 3105
4220 V/7343-19 T520V227M004A(1)E012 88 10 12 3900 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 65
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
4220 V/7343-19 T520V227M004A(1)E015 88 10 15 3500 3105
4220 V/7343-19 T520V227M004A(1)E018 88 10 18 3200 3105
4220 V/7343-19 T520V227M004A(1)E025 88 10 25 2700 3105
4220 V/7343-19 T520V227M004A(1)E040 88 10 40 2200 3105
4220 V/7343-19 T520V227M004A(1)E045 88 10 45 2000 3105
4220 D/7343-31 T520D227M004A(1)E006 88 10 66100 3105
4220 D/7343-31 T520D227M004A(1)E007 88 10 75700 3105
4220 D/7343-31 T520D227M004A(1)E012 88 10 12 4300 3105
4220 D/7343-31 T520D227M004A(1)E065 88 10 65 1900 3105
4330 C/6032-28 T520C337M004A(1)E025 132 825 2600 3105
4330 C/6032-28 T520C337M004A(1)E045 132 845 1900 3105
4330 V/7343-19 T520V337M004A(1)E007 132 10 75200 3105
4330 V/7343-19 T520V337M004A(1)E009 132 10 94600 3105
4330 V/7343-19 T520V337M004A(1)E012 132 10 12 3900 3105
4330 V/7343-19 T520V337M004A(1)E018 132 10 18 3200 3105
4330 V/7343-19 T520V337M004A(1)E025 132 10 25 2700 3105
4330 V/7343-19 T520V337M004A(1)E040 132 10 40 2200 3105
4330 D/7343-31 T520D337M004A(1)E006 132 10 66100 3105
4330 D/7343-31 T520D337M004A(1)E007 132 10 75700 3105
4330 D/7343-31 T520D337M004A(1)E009 132 10 95000 3105
4330 D/7343-31 T520D337M004A(1)E012 132 10 12 4300 3105
4330 D/7343-31 T520D337M004A(1)E015 132 10 15 3900 3105
4330 D/7343-31 T520D337M004A(1)E040 132 10 40 2400 3105
4330 D/7343-31 T520D337M004A(1)E045 132 10 45 2200 3105
4470 D/7343-31 T520D477M004A(1)E010 188 10 10 4700 3105
4470 D/7343-31 T520D477M004A(1)E012 188 10 12 4300 3105
4470 D/7343-31 T520D477M004A(1)E015 188 10 15 3900 3105
4470 D/7343-31 T520D477M004A(1)E018 188 10 18 3500 3105
4470 D/7343-31 T520D477M004A(1)E025 188 10 25 3000 3105
4470 D/7343-31 T520D477M004A(1)E040 188 10 40 2400 3105
4680 D/7343-31 T520D687M004A(1)E012 272 10 12 4300 3105
4680 D/7343-31 T520D687M004A(1)E015 272 10 15 3900 3105
4680 D/7343-31 T520D687M004A(1)E025 272 10 25 3000 3105
4680 Y/7343-40 T520Y687M004A(1)E010 272 10 10 4900 3105
4680 Y/7343-40 T520Y687M004A(1)E015 272 10 15 4000 3105
4680 Y/7343-40 T520Y687M004A(1)E025 272 10 25 3100 3105
4680 X/7343-43 T520X687M004A(1)E010 272 10 10 5000 3105
4680 X/7343-43 T520X687M004A(1)E015 272 10 15 4100 3105
4680 X/7343-43 T520X687M004A(1)E035 272 10 35 2700 3105
6.3 15 T/3528-12 T520T156M006A(1)E100 9 8 100 1000 3105
6.3 22 A/3216-18 T520A226M006A(1)E090 14 890 1100 3105
6.3 22 A/3216-18 T520A226M006A(1)E100 14 8100 1100 3105
6.3 22 T/3528-12 T520T226M006A(1)E100 14 8100 1000 3105
6.3 33 A/3216-18 T520A336M006A(1)E070 21 870 1300 3105
6.3 33 A/3216-18 T520A336M006A(1)E080 21 880 1200 3105
6.3 33 A/3216-18 T520A336M006A(1)E120 21 8120 1000 3105
6.3 33 T/3528-12 T520T336M006A(1)E070 21 870 1200 3105
6.3 33 B/3528-21 T520B336M006A(1)E025 21 825 2300 3105
6.3 33 B/3528-21 T520B336M006A(1)E035 21 835 1900 3105
6.3 33 B/3528-21 T520B336M006A(1)E040 21 840 1800 3105
6.3 33 B/3528-21 T520B336M006A(1)E070 21 870 1300 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
4220 V/7343-19 T520V227M004A(1)E015 88 10 15 3500 3105
4220 V/7343-19 T520V227M004A(1)E018 88 10 18 3200 3105
4220 V/7343-19 T520V227M004A(1)E025 88 10 25 2700 3105
4220 V/7343-19 T520V227M004A(1)E040 88 10 40 2200 3105
4220 V/7343-19 T520V227M004A(1)E045 88 10 45 2000 3105
4220 D/7343-31 T520D227M004A(1)E006 88 10 66100 3105
4220 D/7343-31 T520D227M004A(1)E007 88 10 75700 3105
4220 D/7343-31 T520D227M004A(1)E012 88 10 12 4300 3105
4220 D/7343-31 T520D227M004A(1)E065 88 10 65 1900 3105
4330 C/6032-28 T520C337M004A(1)E025 132 825 2600 3105
4330 C/6032-28 T520C337M004A(1)E045 132 845 1900 3105
4330 V/7343-19 T520V337M004A(1)E007 132 10 75200 3105
4330 V/7343-19 T520V337M004A(1)E009 132 10 94600 3105
4330 V/7343-19 T520V337M004A(1)E012 132 10 12 3900 3105
4330 V/7343-19 T520V337M004A(1)E018 132 10 18 3200 3105
4330 V/7343-19 T520V337M004A(1)E025 132 10 25 2700 3105
4330 V/7343-19 T520V337M004A(1)E040 132 10 40 2200 3105
4330 D/7343-31 T520D337M004A(1)E006 132 10 66100 3105
4330 D/7343-31 T520D337M004A(1)E007 132 10 75700 3105
4330 D/7343-31 T520D337M004A(1)E009 132 10 95000 3105
4330 D/7343-31 T520D337M004A(1)E012 132 10 12 4300 3105
4330 D/7343-31 T520D337M004A(1)E015 132 10 15 3900 3105
4330 D/7343-31 T520D337M004A(1)E040 132 10 40 2400 3105
4330 D/7343-31 T520D337M004A(1)E045 132 10 45 2200 3105
4470 D/7343-31 T520D477M004A(1)E010 188 10 10 4700 3105
4470 D/7343-31 T520D477M004A(1)E012 188 10 12 4300 3105
4470 D/7343-31 T520D477M004A(1)E015 188 10 15 3900 3105
4470 D/7343-31 T520D477M004A(1)E018 188 10 18 3500 3105
4470 D/7343-31 T520D477M004A(1)E025 188 10 25 3000 3105
4470 D/7343-31 T520D477M004A(1)E040 188 10 40 2400 3105
4680 D/7343-31 T520D687M004A(1)E012 272 10 12 4300 3105
4680 D/7343-31 T520D687M004A(1)E015 272 10 15 3900 3105
4680 D/7343-31 T520D687M004A(1)E025 272 10 25 3000 3105
4680 Y/7343-40 T520Y687M004A(1)E010 272 10 10 4900 3105
4680 Y/7343-40 T520Y687M004A(1)E015 272 10 15 4000 3105
4680 Y/7343-40 T520Y687M004A(1)E025 272 10 25 3100 3105
4680 X/7343-43 T520X687M004A(1)E010 272 10 10 5000 3105
4680 X/7343-43 T520X687M004A(1)E015 272 10 15 4100 3105
4680 X/7343-43 T520X687M004A(1)E035 272 10 35 2700 3105
6.3 15 T/3528-12 T520T156M006A(1)E100 9 8 100 1000 3105
6.3 22 A/3216-18 T520A226M006A(1)E090 14 890 1100 3105
6.3 22 A/3216-18 T520A226M006A(1)E100 14 8100 1100 3105
6.3 22 T/3528-12 T520T226M006A(1)E100 14 8100 1000 3105
6.3 33 A/3216-18 T520A336M006A(1)E070 21 870 1300 3105
6.3 33 A/3216-18 T520A336M006A(1)E080 21 880 1200 3105
6.3 33 A/3216-18 T520A336M006A(1)E120 21 8120 1000 3105
6.3 33 T/3528-12 T520T336M006A(1)E070 21 870 1200 3105
6.3 33 B/3528-21 T520B336M006A(1)E025 21 825 2300 3105
6.3 33 B/3528-21 T520B336M006A(1)E035 21 835 1900 3105
6.3 33 B/3528-21 T520B336M006A(1)E040 21 840 1800 3105
6.3 33 B/3528-21 T520B336M006A(1)E070 21 870 1300 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 66
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 99
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
6.3 33 C/6032-28 T520C336M006A(1)E100 21 8100 1300 3105
6.3 47 A/3216-18 T520A476M006A(1)E150 30 8150 900 3105
6.3 47 T/3528-12 T520T476M006A(1)E040 30 840 1600 3105
6.3 47 T/3528-12 T520T476M006A(1)E070 30 870 1200 3105
6.3 47 B/3528-21 T520B476M006A(1)E025 30 825 2300 3105
6.3 47 B/3528-21 T520B476M006A(1)E035 30 835 1900 3105
6.3 47 B/3528-21 T520B476M006A(1)E040 30 840 1800 3105
6.3 47 B/3528-21 T520B476M006A(1)E070 30 870 1300 3105
6.3 68 A/3216-18 T520A686M006A(1)E150 43 8150 900 3105
6.3 68 T/3528-12 T520T686M006A(1)E070 43 870 1200 3105
6.3 68 T/3528-12 T520T686M006A(1)E150 43 8150 800 3105
6.3 68 B/3528-21 T520B686M006A(1)E025 43 825 2300 3105
6.3 68 B/3528-21 T520B686M006A(1)E035 43 835 1900 3105
6.3 68 B/3528-21 T520B686M006A(1)E040 43 840 1800 3105
6.3 68 B/3528-21 T520B686M006A(1)E070 43 870 1300 3105
6.3 68 U/6032-15 T520U686M006A(1)E055 43 855 1600 3105
6.3 68 U/6032-15 T520U686M006A(1)E070 43 870 1400 3105
6.3 68 C/6032-28 T520C686M006A(1)E100 43 8100 1300 3105
6.3 100 A/3216-18 T520A107M006ATE070 63 870 1035 3105
6.3 100 T/3528-12 T520T107M006A(1)E070 63 870 1200 3105
6.3 100 B/3528-21 T520B107M006A(1)E015 63 815 2900 3105
6.3 100 B/3528-21 T520B107M006A(1)E018 63 818 2700 3105
6.3 100 B/3528-21 T520B107M006A(1)E025 63 825 2300 3105
6.3 100 B/3528-21 T520B107M006A(1)E035 63 835 1900 3105
6.3 100 B/3528-21 T520B107M006A(1)E040 63 840 1800 3105
6.3 100 B/3528-21 T520B107M006A(1)E045 63 845 1700 3105
6.3 100 B/3528-21 T520B107M006A(1)E070 63 870 1300 3105
6.3 100 U/6032-15 T520U107M006A(1)E055 63 855 1600 3105
6.3 100 W/7343-15 T520W107M006A(1)E040 63 10 40 2100 3105
6.3 100 V/7343-19 T520V107M006A(1)E009 63 10 94600 3105
6.3 100 V/7343-19 T520V107M006A(1)E012 63 10 12 3900 3105
6.3 100 V/7343-19 T520V107M006A(1)E015 63 10 15 3500 3105
6.3 100 V/7343-19 T520V107M006A(1)E045 63 10 45 2000 3105
6.3 100 C/6032-28 T520C107M006A(1)E025 63 825 2600 3105
6.3 100 C/6032-28 T520C107M006A(1)E045 63 845 1900 3105
6.3 120 B/3528-21 T520B127M006A(1)E035 76 835 1900 3105
6.3 150 M/3528-15 T520M157M006A(1)E070 95 870 1300 3105
6.3 150 M/3528-15 T520M157M006A(1)E150 95 8150 900 3105
6.3 150 M/3528-15 T520M157M006A(1)E200 95 8200 800 3105
6.3 150 B/3528-21 T520B157M006A(1)E025 95 825 2300 3105
6.3 150 B/3528-21 T520B157M006A(1)E035 95 835 1900 3105
6.3 150 B/3528-21 T520B157M006A(1)E045 95 845 1700 3105
6.3 150 B/3528-21 T520B157M006A(1)E070 95 870 1300 3105
6.3 150 C/6032-28 T520C157M006A(1)E015 95 815 3300 3105
6.3 150 C/6032-28 T520C157M006A(1)E025 95 825 2600 3105
6.3 150 C/6032-28 T520C157M006A(1)E045 95 845 1900 3105
6.3 150 C/6032-28 T520C157M006A(1)E055 95 855 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E045 95 845 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E055 95 855 1600 3105
6.3 150 L/6032-19 T520L157M006A(1)E012 95 812 3500 3105
6.3 150 L/6032-19 T520L157M006A(1)E025 95 825 2400 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
6.3 33 C/6032-28 T520C336M006A(1)E100 21 8100 1300 3105
6.3 47 A/3216-18 T520A476M006A(1)E150 30 8150 900 3105
6.3 47 T/3528-12 T520T476M006A(1)E040 30 840 1600 3105
6.3 47 T/3528-12 T520T476M006A(1)E070 30 870 1200 3105
6.3 47 B/3528-21 T520B476M006A(1)E025 30 825 2300 3105
6.3 47 B/3528-21 T520B476M006A(1)E035 30 835 1900 3105
6.3 47 B/3528-21 T520B476M006A(1)E040 30 840 1800 3105
6.3 47 B/3528-21 T520B476M006A(1)E070 30 870 1300 3105
6.3 68 A/3216-18 T520A686M006A(1)E150 43 8150 900 3105
6.3 68 T/3528-12 T520T686M006A(1)E070 43 870 1200 3105
6.3 68 T/3528-12 T520T686M006A(1)E150 43 8150 800 3105
6.3 68 B/3528-21 T520B686M006A(1)E025 43 825 2300 3105
6.3 68 B/3528-21 T520B686M006A(1)E035 43 835 1900 3105
6.3 68 B/3528-21 T520B686M006A(1)E040 43 840 1800 3105
6.3 68 B/3528-21 T520B686M006A(1)E070 43 870 1300 3105
6.3 68 U/6032-15 T520U686M006A(1)E055 43 855 1600 3105
6.3 68 U/6032-15 T520U686M006A(1)E070 43 870 1400 3105
6.3 68 C/6032-28 T520C686M006A(1)E100 43 8100 1300 3105
6.3 100 A/3216-18 T520A107M006ATE070 63 870 1035 3105
6.3 100 T/3528-12 T520T107M006A(1)E070 63 870 1200 3105
6.3 100 B/3528-21 T520B107M006A(1)E015 63 815 2900 3105
6.3 100 B/3528-21 T520B107M006A(1)E018 63 818 2700 3105
6.3 100 B/3528-21 T520B107M006A(1)E025 63 825 2300 3105
6.3 100 B/3528-21 T520B107M006A(1)E035 63 835 1900 3105
6.3 100 B/3528-21 T520B107M006A(1)E040 63 840 1800 3105
6.3 100 B/3528-21 T520B107M006A(1)E045 63 845 1700 3105
6.3 100 B/3528-21 T520B107M006A(1)E070 63 870 1300 3105
6.3 100 U/6032-15 T520U107M006A(1)E055 63 855 1600 3105
6.3 100 W/7343-15 T520W107M006A(1)E040 63 10 40 2100 3105
6.3 100 V/7343-19 T520V107M006A(1)E009 63 10 94600 3105
6.3 100 V/7343-19 T520V107M006A(1)E012 63 10 12 3900 3105
6.3 100 V/7343-19 T520V107M006A(1)E015 63 10 15 3500 3105
6.3 100 V/7343-19 T520V107M006A(1)E045 63 10 45 2000 3105
6.3 100 C/6032-28 T520C107M006A(1)E025 63 825 2600 3105
6.3 100 C/6032-28 T520C107M006A(1)E045 63 845 1900 3105
6.3 120 B/3528-21 T520B127M006A(1)E035 76 835 1900 3105
6.3 150 M/3528-15 T520M157M006A(1)E070 95 870 1300 3105
6.3 150 M/3528-15 T520M157M006A(1)E150 95 8150 900 3105
6.3 150 M/3528-15 T520M157M006A(1)E200 95 8200 800 3105
6.3 150 B/3528-21 T520B157M006A(1)E025 95 825 2300 3105
6.3 150 B/3528-21 T520B157M006A(1)E035 95 835 1900 3105
6.3 150 B/3528-21 T520B157M006A(1)E045 95 845 1700 3105
6.3 150 B/3528-21 T520B157M006A(1)E070 95 870 1300 3105
6.3 150 C/6032-28 T520C157M006A(1)E015 95 815 3300 3105
6.3 150 C/6032-28 T520C157M006A(1)E025 95 825 2600 3105
6.3 150 C/6032-28 T520C157M006A(1)E045 95 845 1900 3105
6.3 150 C/6032-28 T520C157M006A(1)E055 95 855 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E045 95 845 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E055 95 855 1600 3105
6.3 150 L/6032-19 T520L157M006A(1)E012 95 812 3500 3105
6.3 150 L/6032-19 T520L157M006A(1)E025 95 825 2400 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 67
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1010
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
6.3 150 W/7343-15 T520W157M006A(1)E025 95 10 25 2700 3105
6.3 150 W/7343-15 T520W157M006A(1)E040 95 10 40 2100 3105
6.3 150 V/7343-19 T520V157M006A(1)E006 95 10 65600 3105
6.3 150 V/7343-19 T520V157M006A(1)E007 95 10 75200 3105
6.3 150 V/7343-19 T520V157M006A(1)E009 95 10 94600 3105
6.3 150 V/7343-19 T520V157M006A(1)E012 95 10 12 3900 3105
6.3 150 V/7343-19 T520V157M006A(1)E015 95 10 15 3500 3105
6.3 150 V/7343-19 T520V157M006A(1)E018 95 10 18 3200 3105
6.3 150 V/7343-19 T520V157M006A(1)E025 95 10 25 2700 3105
6.3 150 V/7343-19 T520V157M006A(1)E040 95 10 40 2200 3105
6.3 150 V/7343-19 T520V157M006A(1)E045 95 10 45 2000 3105
6.3 150 D/7343-31 T520D157M006A(1)E006 95 10 66100 3105
6.3 150 D/7343-31 T520D157M006A(1)E007 95 10 75700 3105
6.3 150 D/7343-31 T520D157M006A(1)E015 95 10 15 3900 3105
6.3 150 D/7343-31 T520D157M006A(1)E025 95 10 25 3000 3105
6.3 150 D/7343-31 T520D157M006A(1)E055 95 10 55 2000 3105
6.3 220 B/3528-21 T520B227M006A(1)E035 139 835 1900 3105
6.3 220 B/3528-21 T520B227M006A(1)E045 139 845 1700 3105
6.3 220 B/3528-21 T520B227M006A(1)E070 139 870 1300 3105
6.3 220 C/6032-28 T520C227M006A(1)E015 139 815 3300 3105
6.3 220 C/6032-28 T520C227M006A(1)E018 139 818 3000 3105
6.3 220 C/6032-28 T520C227M006A(1)E025 139 825 2600 3105
6.3 220 C/6032-28 T520C227M006A(1)E045 139 845 1900 3105
6.3 220 V/7343-19 T520V227M006A(1)E007 139 10 75200 3105
6.3 220 V/7343-19 T520V227M006A(1)E009 139 10 94600 3105
6.3 220 V/7343-19 T520V227M006A(1)E012 139 10 12 3900 3105
6.3 220 V/7343-19 T520V227M006A(1)E015 139 10 15 3500 3105
6.3 220 V/7343-19 T520V227M006A(1)E018 139 10 18 3200 3105
6.3 220 V/7343-19 T520V227M006A(1)E025 139 10 25 2700 3105
6.3 220 V/7343-19 T520V227M006A(1)E040 139 10 40 2200 3105
6.3 220 D/7343-31 T520D227M006A(1)E006 139 10 66100 3105
6.3 220 D/7343-31 T520D227M006A(1)E007 139 10 75700 3105
6.3 220 D/7343-31 T520D227M006A(1)E009 139 10 95000 3105
6.3 220 D/7343-31 T520D227M006A(1)E015 139 10 15 3900 3105
6.3 220 D/7343-31 T520D227M006A(1)E018 139 10 18 3500 3105
6.3 220 D/7343-31 T520D227M006A(1)E025 139 10 25 3000 3105
6.3 220 D/7343-31 T520D227M006A(1)E040 139 10 40 2400 3105
6.3 220 D/7343-31 T520D227M006A(1)E050 139 10 50 2100 3105
6.3 330 V/7343-19 T520V337M006A(1)E015 208 10 15 3500 3105
6.3 330 V/7343-19 T520V337M006A(1)E018 208 10 18 3200 3105
6.3 330 V/7343-19 T520V337M006A(1)E025 208 10 25 2700 3105
6.3 330 V/7343-19 T520V337M006A(1)E040 208 10 40 2200 3105
6.3 330 V/7343-19 T520V337M006A(1)E045 208 10 45 2000 3105
6.3 330 D/7343-31 T520D337M006A(1)E009 208 10 95000 3105
6.3 330 D/7343-31 T520D337M006A(1)E010 208 10 10 4700 3105
6.3 330 D/7343-31 T520D337M006A(1)E015 208 10 15 3900 3105
6.3 330 D/7343-31 T520D337M006A(1)E018 208 10 18 3500 3105
6.3 330 D/7343-31 T520D337M006A(1)E025 208 10 25 3000 3105
6.3 330 D/7343-31 T520D337M006A(1)E040 208 10 40 2400 3105
6.3 330 D/7343-31 T520D337M006A(1)E045 208 10 45 2200 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E010 208 10 10 4900 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
6.3 150 W/7343-15 T520W157M006A(1)E025 95 10 25 2700 3105
6.3 150 W/7343-15 T520W157M006A(1)E040 95 10 40 2100 3105
6.3 150 V/7343-19 T520V157M006A(1)E006 95 10 65600 3105
6.3 150 V/7343-19 T520V157M006A(1)E007 95 10 75200 3105
6.3 150 V/7343-19 T520V157M006A(1)E009 95 10 94600 3105
6.3 150 V/7343-19 T520V157M006A(1)E012 95 10 12 3900 3105
6.3 150 V/7343-19 T520V157M006A(1)E015 95 10 15 3500 3105
6.3 150 V/7343-19 T520V157M006A(1)E018 95 10 18 3200 3105
6.3 150 V/7343-19 T520V157M006A(1)E025 95 10 25 2700 3105
6.3 150 V/7343-19 T520V157M006A(1)E040 95 10 40 2200 3105
6.3 150 V/7343-19 T520V157M006A(1)E045 95 10 45 2000 3105
6.3 150 D/7343-31 T520D157M006A(1)E006 95 10 66100 3105
6.3 150 D/7343-31 T520D157M006A(1)E007 95 10 75700 3105
6.3 150 D/7343-31 T520D157M006A(1)E015 95 10 15 3900 3105
6.3 150 D/7343-31 T520D157M006A(1)E025 95 10 25 3000 3105
6.3 150 D/7343-31 T520D157M006A(1)E055 95 10 55 2000 3105
6.3 220 B/3528-21 T520B227M006A(1)E035 139 835 1900 3105
6.3 220 B/3528-21 T520B227M006A(1)E045 139 845 1700 3105
6.3 220 B/3528-21 T520B227M006A(1)E070 139 870 1300 3105
6.3 220 C/6032-28 T520C227M006A(1)E015 139 815 3300 3105
6.3 220 C/6032-28 T520C227M006A(1)E018 139 818 3000 3105
6.3 220 C/6032-28 T520C227M006A(1)E025 139 825 2600 3105
6.3 220 C/6032-28 T520C227M006A(1)E045 139 845 1900 3105
6.3 220 V/7343-19 T520V227M006A(1)E007 139 10 75200 3105
6.3 220 V/7343-19 T520V227M006A(1)E009 139 10 94600 3105
6.3 220 V/7343-19 T520V227M006A(1)E012 139 10 12 3900 3105
6.3 220 V/7343-19 T520V227M006A(1)E015 139 10 15 3500 3105
6.3 220 V/7343-19 T520V227M006A(1)E018 139 10 18 3200 3105
6.3 220 V/7343-19 T520V227M006A(1)E025 139 10 25 2700 3105
6.3 220 V/7343-19 T520V227M006A(1)E040 139 10 40 2200 3105
6.3 220 D/7343-31 T520D227M006A(1)E006 139 10 66100 3105
6.3 220 D/7343-31 T520D227M006A(1)E007 139 10 75700 3105
6.3 220 D/7343-31 T520D227M006A(1)E009 139 10 95000 3105
6.3 220 D/7343-31 T520D227M006A(1)E015 139 10 15 3900 3105
6.3 220 D/7343-31 T520D227M006A(1)E018 139 10 18 3500 3105
6.3 220 D/7343-31 T520D227M006A(1)E025 139 10 25 3000 3105
6.3 220 D/7343-31 T520D227M006A(1)E040 139 10 40 2400 3105
6.3 220 D/7343-31 T520D227M006A(1)E050 139 10 50 2100 3105
6.3 330 V/7343-19 T520V337M006A(1)E015 208 10 15 3500 3105
6.3 330 V/7343-19 T520V337M006A(1)E018 208 10 18 3200 3105
6.3 330 V/7343-19 T520V337M006A(1)E025 208 10 25 2700 3105
6.3 330 V/7343-19 T520V337M006A(1)E040 208 10 40 2200 3105
6.3 330 V/7343-19 T520V337M006A(1)E045 208 10 45 2000 3105
6.3 330 D/7343-31 T520D337M006A(1)E009 208 10 95000 3105
6.3 330 D/7343-31 T520D337M006A(1)E010 208 10 10 4700 3105
6.3 330 D/7343-31 T520D337M006A(1)E015 208 10 15 3900 3105
6.3 330 D/7343-31 T520D337M006A(1)E018 208 10 18 3500 3105
6.3 330 D/7343-31 T520D337M006A(1)E025 208 10 25 3000 3105
6.3 330 D/7343-31 T520D337M006A(1)E040 208 10 40 2400 3105
6.3 330 D/7343-31 T520D337M006A(1)E045 208 10 45 2200 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E010 208 10 10 4900 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 68
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1111
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
6.3 330 Y/7343-40 T520Y337M006A(1)E015 208 10 15 4000 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E025 208 10 25 3100 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E040 208 10 40 2500 3105
6.3 470 W/7343-15 T520W477M006A(1)E055 296 10 55 1800 385
6.3 470 V/7343-19 T520V477M006A(1)E055 296 10 55 1800 385
6.3 470 Y/7343-40 T520Y477M006A(1)E010 296 10 10 4900 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E015 296 10 15 4000 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E018 296 10 18 3700 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E025 296 10 25 3100 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E035 296 10 35 2600 3105
6.3 470 D/7343-31 T520D477M006A(1)E015 296 10 15 3900 3105
6.3 470 D/7343-31 T520D477M006A(1)E025 296 10 25 3000 3105
6.3 470 D/7343-31 T520D477M006A(1)E030 296 10 30 2700 3105
6.3 470 X/7343-43 T520X477M006A(1)E010 296 10 10 5000 3105
6.3 470 X/7343-43 T520X477M006A(1)E018 296 10 18 3700 3105
6.3 470 X/7343-43 T520X477M006A(1)E035 296 10 35 2700 3105
6.3 470 X/7343-43 T520X477M006A(1)E040 296 10 40 2500 3105
6.3 1000 H/7260-20 T520H108M006A(1)E055 630 20 55 1800 485
6.3 1500 H/7260-20 T520H158M006A(1)E055 945 20 55 1800 485
833 T/3528-12 T520T336M008A(1)E070 26 870 1200 3105
833 T/3528-12 T520T336M008A(1)E080 26 880 1100 3105
833 B/3528-21 T520B336M008A(1)E025 26 825 2300 3105
833 B/3528-21 T520B336M008A(1)E035 26 835 1900 3105
833 B/3528-21 T520B336M008A(1)E040 26 840 1800 3105
833 B/3528-21 T520B336M008A(1)E070 26 870 1300 3105
833 U/6032-15 T520U336M008A(1)E070 26 870 1400 3105
847 B/3528-21 T520B476M008A(1)E035 38 835 1900 3105
847 B/3528-21 T520B476M008A(1)E070 38 870 1300 3105
882 C/6032-28 T520C826M008A(1)E025 66 825 2600 3105
882 C/6032-28 T520C826M008A(1)E045 66 845 1900 3105
8150 D/7343-31 T520D157M008A(1)E025 120 10 25 3000 3105
8150 D/7343-31 T520D157M008A(1)E040 120 10 40 2400 3105
8150 D/7343-31 T520D157M008A(1)E055 120 10 55 2000 3105
8150 V/7343-19 T520V157M008A(1)E040 120 10 40 2200 3105
10 10 A/3216-18 T520A106M010A(1)E080 10 880 1200 3105
10 15 A/3216-18 T520A156M010A(1)E080 15 880 1200 3105
10 22 A/3216-18 T520A226M010A(1)E080 22 880 1200 3105
10 33 T/3528-12 T520T336M010A(1)E040 33 840 1600 3105
10 33 T/3528-12 T520T336M010A(1)E070 33 870 1200 3105
10 33 T/3528-12 T520T336M010A(1)E080 33 880 1100 3105
10 33 B/3528-21 T520B336M010A(1)E025 33 825 2300 3105
10 33 B/3528-21 T520B336M010A(1)E035 33 835 1900 3105
10 33 B/3528-21 T520B336M010A(1)E040 33 840 1800 3105
10 33 B/3528-21 T520B336M010A(1)E070 33 870 1300 3105
10 33 U/6032-15 T520U336M010A(1)E070 33 870 1400 3105
10 47 B/3528-21 T520B476M010A(1)E035 47 835 1900 3105
10 47 B/3528-21 T520B476M010A(1)E070 47 870 1300 3105
10 47 U/6032-15 T520U476M010A(1)E055 47 855 1600 3105
10 47 C/6032-28 T520C476M010A(1)E100 47 8100 1300 3105
10 68 U/6032-15 T520U686M010A(1)E055 68 855 1600 3105
10 68 W/7343-15 T520W686M010A(1)E025 68 10 25 2700 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
6.3 330 Y/7343-40 T520Y337M006A(1)E015 208 10 15 4000 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E025 208 10 25 3100 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E040 208 10 40 2500 3105
6.3 470 W/7343-15 T520W477M006A(1)E055 296 10 55 1800 385
6.3 470 V/7343-19 T520V477M006A(1)E055 296 10 55 1800 385
6.3 470 Y/7343-40 T520Y477M006A(1)E010 296 10 10 4900 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E015 296 10 15 4000 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E018 296 10 18 3700 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E025 296 10 25 3100 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E035 296 10 35 2600 3105
6.3 470 D/7343-31 T520D477M006A(1)E015 296 10 15 3900 3105
6.3 470 D/7343-31 T520D477M006A(1)E025 296 10 25 3000 3105
6.3 470 D/7343-31 T520D477M006A(1)E030 296 10 30 2700 3105
6.3 470 X/7343-43 T520X477M006A(1)E010 296 10 10 5000 3105
6.3 470 X/7343-43 T520X477M006A(1)E018 296 10 18 3700 3105
6.3 470 X/7343-43 T520X477M006A(1)E035 296 10 35 2700 3105
6.3 470 X/7343-43 T520X477M006A(1)E040 296 10 40 2500 3105
6.3 1000 H/7260-20 T520H108M006A(1)E055 630 20 55 1800 485
6.3 1500 H/7260-20 T520H158M006A(1)E055 945 20 55 1800 485
833 T/3528-12 T520T336M008A(1)E070 26 870 1200 3105
833 T/3528-12 T520T336M008A(1)E080 26 880 1100 3105
833 B/3528-21 T520B336M008A(1)E025 26 825 2300 3105
833 B/3528-21 T520B336M008A(1)E035 26 835 1900 3105
833 B/3528-21 T520B336M008A(1)E040 26 840 1800 3105
833 B/3528-21 T520B336M008A(1)E070 26 870 1300 3105
833 U/6032-15 T520U336M008A(1)E070 26 870 1400 3105
847 B/3528-21 T520B476M008A(1)E035 38 835 1900 3105
847 B/3528-21 T520B476M008A(1)E070 38 870 1300 3105
882 C/6032-28 T520C826M008A(1)E025 66 825 2600 3105
882 C/6032-28 T520C826M008A(1)E045 66 845 1900 3105
8150 D/7343-31 T520D157M008A(1)E025 120 10 25 3000 3105
8150 D/7343-31 T520D157M008A(1)E040 120 10 40 2400 3105
8150 D/7343-31 T520D157M008A(1)E055 120 10 55 2000 3105
8150 V/7343-19 T520V157M008A(1)E040 120 10 40 2200 3105
10 10 A/3216-18 T520A106M010A(1)E080 10 880 1200 3105
10 15 A/3216-18 T520A156M010A(1)E080 15 880 1200 3105
10 22 A/3216-18 T520A226M010A(1)E080 22 880 1200 3105
10 33 T/3528-12 T520T336M010A(1)E040 33 840 1600 3105
10 33 T/3528-12 T520T336M010A(1)E070 33 870 1200 3105
10 33 T/3528-12 T520T336M010A(1)E080 33 880 1100 3105
10 33 B/3528-21 T520B336M010A(1)E025 33 825 2300 3105
10 33 B/3528-21 T520B336M010A(1)E035 33 835 1900 3105
10 33 B/3528-21 T520B336M010A(1)E040 33 840 1800 3105
10 33 B/3528-21 T520B336M010A(1)E070 33 870 1300 3105
10 33 U/6032-15 T520U336M010A(1)E070 33 870 1400 3105
10 47 B/3528-21 T520B476M010A(1)E035 47 835 1900 3105
10 47 B/3528-21 T520B476M010A(1)E070 47 870 1300 3105
10 47 U/6032-15 T520U476M010A(1)E055 47 855 1600 3105
10 47 C/6032-28 T520C476M010A(1)E100 47 8100 1300 3105
10 68 U/6032-15 T520U686M010A(1)E055 68 855 1600 3105
10 68 W/7343-15 T520W686M010A(1)E025 68 10 25 2700 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 69
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1212
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
10 68 W/7343-15 T520W686M010A(1)E040 68 10 40 2100 3105
10 68 C/6032-28 T520C686M010A(1)E045 68 845 1900 3105
10 68 V/7343-19 T520V686M010A(1)E025 68 10 25 2700 3105
10 68 V/7343-19 T520V686M010A(1)E040 68 10 40 2200 3105
10 68 V/7343-19 T520V686M010A(1)E045 68 10 45 2000 3105
10 68 V/7343-19 T520V686M010A(1)E060 68 10 60 1800 3105
10 68 V/7343-19 T520V686M010A(1)E100 68 10 100 1400 3105
10 68 D/7343-31 T520D686M010A(1)E100 68 10 100 1500 3105
10 100 C/6032-28 T520C107M010A(1)E025 100 825 2600 3105
10 100 C/6032-28 T520C107M010A(1)E045 100 845 1900 3105
10 100 L/6032-19 T520L107M010A(1)E025 100 825 2400 3105
10 100 W/7343-15 T520W107M010A(1)E040 100 10 40 2100 3105
10 100 V/7343-19 T520V107M010A(1)E018 100 10 18 3200 3105
10 100 V/7343-19 T520V107M010A(1)E025 100 10 25 2700 3105
10 100 V/7343-19 T520V107M010A(1)E045 100 10 45 2000 3105
10 100 V/7343-19 T520V107M010A(1)E050 100 10 50 1900 3105
10 100 D/7343-31 T520D107M010A(1)E018 100 10 18 3500 3105
10 100 D/7343-31 T520D107M010A(1)E055 100 10 55 2000 3105
10 100 D/7343-31 T520D107M010A(1)E080 100 10 80 1700 3105
10 150 C/6032-28 T520C157M010A(1)E055 150 855 1700 3105
10 150 V/7343-19 T520V157M010A(1)E018 150 10 18 3200 3105
10 150 V/7343-19 T520V157M010A(1)E025 150 10 25 2700 3105
10 150 V/7343-19 T520V157M010A(1)E040 150 10 40 2200 3105
10 150 D/7343-31 T520D157M010A(1)E015 150 10 15 3900 3105
10 150 D/7343-31 T520D157M010A(1)E018 150 10 18 3500 3105
10 150 D/7343-31 T520D157M010A(1)E025 150 10 25 3000 3105
10 150 D/7343-31 T520D157M010A(1)E040 150 10 40 2400 3105
10 150 D/7343-31 T520D157M010A(1)E055 150 10 55 2000 3105
10 150 Y/7343-40 T520Y157M010A(1)E015 150 10 15 4000 3105
10 150 Y/7343-40 T520Y157M010A(1)E018 150 10 18 3700 3105
10 150 Y/7343-40 T520Y157M010A(1)E025 150 10 25 3100 3105
10 220 V/7343-19 T520V227M010A(1)E045 220 10 45 2000 3105
10 220 V/7343-19 T520V227M010A(1)E025 220 10 25 2700 3105
10 220 D/7343-31 T520D227M010A(1)E018 220 10 18 3500 3105
10 220 D/7343-31 T520D227M010A(1)E025 220 10 25 3000 3105
10 220 D/7343-31 T520D227M010A(1)E040 220 10 40 2400 3105
10 220 Y/7343-40 T520Y227M010A(1)E040 220 10 40 2500 3105
10 330 Y/7343-40 T520Y337M010A(1)E010 330 10 10 4900 3105
10 330 Y/7343-40 T520Y337M010A(1)E015 330 10 15 4000 3105
10 330 Y/7343-40 T520Y337M010A(1)E035 330 10 35 2600 3105
10 330 X/7343-43 T520X337M010A(1)E010 330 10 10 5000 3105
10 330 X/7343-43 T520X337M010A(1)E025 330 10 25 3100 3105
10 330 X/7343-43 T520X337M010A(1)E040 330 10 40 2500 3105
12.5 10 T/3528-12 T520T106M12RA(1)E150 13 8150 800 3105
12.5 15 T/3528-12 T520T156M12RA(1)E080 19 880 1100 3105
16 10 B/3528-21 T520B106M016A(1)E100 16 8100 1100 3105
16 22 C/6032-28 T520C226M016A(1)E080 35 880 1400 3105
16 33 W/7343-15 T520W336M016A(1)E045 53 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E045 53 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E060 53 10 60 1800 3105
16 33 V/7343-19 T520V336M016A(1)E070 53 10 70 1600 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
10 68 W/7343-15 T520W686M010A(1)E040 68 10 40 2100 3105
10 68 C/6032-28 T520C686M010A(1)E045 68 845 1900 3105
10 68 V/7343-19 T520V686M010A(1)E025 68 10 25 2700 3105
10 68 V/7343-19 T520V686M010A(1)E040 68 10 40 2200 3105
10 68 V/7343-19 T520V686M010A(1)E045 68 10 45 2000 3105
10 68 V/7343-19 T520V686M010A(1)E060 68 10 60 1800 3105
10 68 V/7343-19 T520V686M010A(1)E100 68 10 100 1400 3105
10 68 D/7343-31 T520D686M010A(1)E100 68 10 100 1500 3105
10 100 C/6032-28 T520C107M010A(1)E025 100 825 2600 3105
10 100 C/6032-28 T520C107M010A(1)E045 100 845 1900 3105
10 100 L/6032-19 T520L107M010A(1)E025 100 825 2400 3105
10 100 W/7343-15 T520W107M010A(1)E040 100 10 40 2100 3105
10 100 V/7343-19 T520V107M010A(1)E018 100 10 18 3200 3105
10 100 V/7343-19 T520V107M010A(1)E025 100 10 25 2700 3105
10 100 V/7343-19 T520V107M010A(1)E045 100 10 45 2000 3105
10 100 V/7343-19 T520V107M010A(1)E050 100 10 50 1900 3105
10 100 D/7343-31 T520D107M010A(1)E018 100 10 18 3500 3105
10 100 D/7343-31 T520D107M010A(1)E055 100 10 55 2000 3105
10 100 D/7343-31 T520D107M010A(1)E080 100 10 80 1700 3105
10 150 C/6032-28 T520C157M010A(1)E055 150 855 1700 3105
10 150 V/7343-19 T520V157M010A(1)E018 150 10 18 3200 3105
10 150 V/7343-19 T520V157M010A(1)E025 150 10 25 2700 3105
10 150 V/7343-19 T520V157M010A(1)E040 150 10 40 2200 3105
10 150 D/7343-31 T520D157M010A(1)E015 150 10 15 3900 3105
10 150 D/7343-31 T520D157M010A(1)E018 150 10 18 3500 3105
10 150 D/7343-31 T520D157M010A(1)E025 150 10 25 3000 3105
10 150 D/7343-31 T520D157M010A(1)E040 150 10 40 2400 3105
10 150 D/7343-31 T520D157M010A(1)E055 150 10 55 2000 3105
10 150 Y/7343-40 T520Y157M010A(1)E015 150 10 15 4000 3105
10 150 Y/7343-40 T520Y157M010A(1)E018 150 10 18 3700 3105
10 150 Y/7343-40 T520Y157M010A(1)E025 150 10 25 3100 3105
10 220 V/7343-19 T520V227M010A(1)E045 220 10 45 2000 3105
10 220 V/7343-19 T520V227M010A(1)E025 220 10 25 2700 3105
10 220 D/7343-31 T520D227M010A(1)E018 220 10 18 3500 3105
10 220 D/7343-31 T520D227M010A(1)E025 220 10 25 3000 3105
10 220 D/7343-31 T520D227M010A(1)E040 220 10 40 2400 3105
10 220 Y/7343-40 T520Y227M010A(1)E040 220 10 40 2500 3105
10 330 Y/7343-40 T520Y337M010A(1)E010 330 10 10 4900 3105
10 330 Y/7343-40 T520Y337M010A(1)E015 330 10 15 4000 3105
10 330 Y/7343-40 T520Y337M010A(1)E035 330 10 35 2600 3105
10 330 X/7343-43 T520X337M010A(1)E010 330 10 10 5000 3105
10 330 X/7343-43 T520X337M010A(1)E025 330 10 25 3100 3105
10 330 X/7343-43 T520X337M010A(1)E040 330 10 40 2500 3105
12.5 10 T/3528-12 T520T106M12RA(1)E150 13 8150 800 3105
12.5 15 T/3528-12 T520T156M12RA(1)E080 19 880 1100 3105
16 10 B/3528-21 T520B106M016A(1)E100 16 8100 1100 3105
16 22 C/6032-28 T520C226M016A(1)E080 35 880 1400 3105
16 33 W/7343-15 T520W336M016A(1)E045 53 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E045 53 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E060 53 10 60 1800 3105
16 33 V/7343-19 T520V336M016A(1)E070 53 10 70 1600 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 70
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1313
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Roll Over for
Order Info.
T520 V157 M006 A T E045
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A, B, C, D, H,
L, M, T, U, V,
W, X, Y
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (045 = 45
mΩ)
Blank = 7"
Reel 7280 =
13" Reel
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
(ºC)
16 47 W/7343-15 T520W476M016A(1)E045 75 10 45 2000 3105
16 47 V/7343-19 T520V476M016A(1)E045 75 10 45 2000 3105
16 47 V/7343-19 T520V476M016A(1)E070 75 10 70 1600 3105
16 47 D/7343-31 T520D476M016A(1)E035 75 10 35 2500 3105
16 47 D/7343-31 T520D476M016A(1)E070 75 10 70 1800 3105
16 68 D/7343-31 T520D686M016A(1)E050 109 10 50 2100 3105
16 150 X/7343-43 T520X157M016A(1)E040 240 10 40 2500 3105
20 22 V/7343-19 T520V226M020A(1)E040 44 10 40 2200 3105
20 22 V/7343-19 T520V226M020A(1)E045 44 10 45 2000 3105
20 22 V/7343-19 T520V226M020A(1)E090 44 10 90 1400 3105
25 15 V/7343-19 T520V156M025A(1)E090 38 10 90 1400 3105
25 15 D/7343-31 T520D156M025A(1)E060 38 10 60 1900 3105
25 15 D/7343-31 T520D156M025A(1)E080 38 10 80 1700 3105
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºC C)
16 47 W/7343-15 T520W476M016A(1)E045 75 10 45 2000 3105
16 47 V/7343-19 T520V476M016A(1)E045 75 10 45 2000 3105
16 47 V/7343-19 T520V476M016A(1)E070 75 10 70 1600 3105
16 47 D/7343-31 T520D476M016A(1)E035 75 10 35 2500 3105
16 47 D/7343-31 T520D476M016A(1)E070 75 10 70 1800 3105
16 68 D/7343-31 T520D686M016A(1)E050 109 10 50 2100 3105
16 150 X/7343-43 T520X157M016A(1)E040 240 10 40 2500 3105
20 22 V/7343-19 T520V226M020A(1)E040 44 10 40 2200 3105
20 22 V/7343-19 T520V226M020A(1)E045 44 10 45 2000 3105
20 22 V/7343-19 T520V226M020A(1)E090 44 10 90 1400 3105
25 15 V/7343-19 T520V156M025A(1)E090 38 10 90 1400 3105
25 15 D/7343-31 T520D156M025A(1)E060 38 10 60 1900 3105
25 15 D/7343-31 T520D156M025A(1)E080 38 10 80 1700 3105
VDC µF KEMET/EIA (See below for
part options)
µA @ 20°C
Maximum/5
Minutes
% @ 20°C
120 Hz
Maximum
mΩ @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 71
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1414
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Derating Guidelines
Voltage Rating
Maximum
Recommended
Steady State
Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 105°C
2. V ≤ VR ≤ 10 V 90% of VRVR
12.5 V ≤ VR ≤ 25 V 80% of VRVR
VR= Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
+30°C Rise
T520T
3528–12
105
T520M
3528–15
120
T520A
3216–18
112
T520B
352821
127
T520U
6032–15
135
T520L
6032–19
150
T520C
6032–28
165
T520W
7343–15
180
T520V /T522V
7343–19
187
T520D
734331
225
T520Y/T522Y
734340
241
T520X
734343
247
T520H
7360–20
187
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
Maximum
Transient
Voltage
Recommended
Application Voltage
< = 10 V
Recommended
Application
Voltage > 10 V
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
100%
-55 25 85 105
% Rated Voltage
Temperature (°C)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 72
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1515
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032–19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528–15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360–20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343–12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R
2
2012–12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S
2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides
a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern
variations the user should perform quali cation testing based on the conditions outlined in IPC standard 7351
(IPC7351).
1 Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 73
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1616
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Polymer /Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 74
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2015_T520 8/5/2013 1717
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Capacitor Marking
(KO)
KEMET
Organic
Polymer
Rated
Voltage
476
16 K
230
KO Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
(KO)
KEMET
Organic
Polymer
Rated
Voltage
476
16V
KO Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
K
C6 49 Internal Code
Polarity
Indicator (+)
Voltage and
Capacitance Code
*Date Code
E jA8
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
Date Code*
Year Month
X = 2009 1 = Jan 7 = Jul
A = 2010 2 = Feb 8 = Aug
B = 2011 3 = Mar 9 = Spt
C = 2012 4 = Apr O = Oct
D = 2013 5 = May N = Nov
E = 2014 6 = Jun D = Dec
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Date Code *
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
2013 A B CDEF G H J KLM
2014 N P QR S TU V W X Y Z
2015 abcdef g h jklm
2016 npqr s t u v w x y z
Code e g j A
Rated Voltage
2.5 V
4 V
6 V
10 V
Code J7 N7 S7 W7 A8 N8
Capacitance 22 33 47 68 100 330
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 75
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 1
One world. One KEMET
Bene ts
Voltage ratings to 63 V
Volumetric effi ciency
Stable temperature characteristics
Up to 330 µF capacitance value
High ripple current capability
Low ESR
High reliability
Low profi le design
Benign failure mode
Pb Free when ordered with 100% Sn termination
RoHS Compliant and Halogen Free
Applications
Typical applications include DC/DC converters, power supply
input and higher voltage applications such as 12 V to 50 V power
input rails in the military/aerospace and industrial markets.
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum
capacitor with a Ta anode and Ta2O5 dielectric. A conductive
organic polymer replaces the traditionally used MnO2 as the
cathode plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-
CAP also exhibits a benign failure mode which eliminates the
ignition failures that can occur in standard MnO2 tantalum types.
KO-CAPs may also be operated at voltages up to 90% of rated
voltage for part types with rated voltages of ≤ 10 volts and up
to 80% of rated voltage for part types > 10 volts with equivalent
or better reliability than traditional MnO2 tantalum capacitors
operated at 50% of rated voltage.
The T521 Series High Voltage Polymer Tantalum is designed
for higher application voltages such as 12 V, 24 V, 28 V, and 48
V input rails. This series demonstrates excellent high voltage
handling capabilities and reliability and is commonly selected
as a replacement for other high capacitance dielectrics such as
MnO2 tantalum and aluminum electrolytic capacitors. The T521
Series can be safely operated at 80% of the rated voltages and
can withstand transient conditions up to the rated voltage of the
component. This series offers higher capacitance for a given
application voltage when compared to multilayer ceramic and
tantalum MnO2 devices. The T521 Series also offers superior
ESR performance over tantalum MnO2 and aluminum electrolytic
capacitors and a much lower profi le than aluminum polymer and
aluminum electrolytic capacitors.
KEMET Organic Capacitor (KO-CAP)
T521 High Voltage Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 76
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T521 V226 M025 A T E060
Capacitor
Class Series Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
521 =
High
Voltage
Polymer
D, V,
W, X
First two digits
represent
signifi cant
gures. Third
digit speci es
number of zeros.
M = ±20% 016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A T = 100% Matte Tin (Sn)
Plated
H = Tin/Lead (SnPb)
Solder Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
. (060 = 60
)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 105°C/125°C (Refer to part number for maximum temperature rating)
Rated Capacitance Range 15 – 330 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 16 – 63 V
DF (120 Hz) ≤ 10% - Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 77
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
Quali cation
Test Condition Characteristics
Endurance 105°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours**
Δ C/C Within -20%/+10% of initial value
DF Within initial limits
DCL IL @ 105°C, 2 x IL @ 125°C
ESR 2 x Initial Limit
Storage Life 105°C @ 0 volts, 2,000 hours
125°C @ 0 voltage, 2,000 hours**
Δ C/C
Within -20%/+10% of initial value
DF Within initial limits
DCL IL @ 105°C, 2 x IL @ 125°C
ESR 2 x Initial Limit
Humidity 60° C, 90% RH, 1,000 hours, No Load
Δ C/C Within -5%/+35% of initial value
DF Within initial limits
DCL Within 3.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +10/125°C, +25°C
+2C
-55°C
+85°C
+105º/12C
Δ C/C IL* ±20% ±20% ±30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105°C, 1.32 x rated voltage, 33 Ω Resistance, 1,000 cycles
Δ C/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak.
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
**Refer to part number speci cations for individual temperature classi cation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 78
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
T521V476M020ATE055
T521V336M025ATE060
T521V156M035ATE100
Capacitance (µF)
Frequency (Hz)
Capacitance vs. Frequency
ESR vs. Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T521V476M020ATE055_Imp
T521V336M025ATE060_Imp
T521V156M035ATE100_Imp
T521V476M020ATE055_ESR
T521V336M025ATE060_ESR
T521V156M035ATE100_ESR
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
D734331
7.3 ±0.3
(0.287 ±0.012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(.110 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
V7343–20
7.3 ±0.3
(0.287 ±0.012)
4.3 ± 0.3
(.169 ± .012)
2.0 Maximum 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
W7343–15
7.3 ±0.3
(0.287 ±0.012)
4.3 ± 0.3
(.169 ± .012)
1.5 (.059) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ± 0.3
(.169 ± .012)
4.0 ± 0.3
(.157 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
Electrical Characteristics
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 79
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
T521 V226 M025 A T E060
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
521 =
High
Voltage
Polymer
D, V,
W, X
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
M = ±20%
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
T = 100% Matte Tin (Sn)
Plated
H = Tin/Lead (SnPb)
Solder Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
. (060 = 60
)
Blank = 7" Reel
7280 = 13" Reel
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Max/5 Min
%@ 20°C
120 Hz Max
mΩ @ 20°C
100 kHz Max
(mA) +45ºC 100 kHz
Temp 260ºC
C)
16 47 V/7343-20 T521V476M016A(1)E080 75.2 10 80 1500.0 3105
16 47 D/7343-31 T521D476M016A(1)E045 75.2 10 45 2200.0 3105
16 47 D/7343-31 T521D476M016A(1)E055 75.2 10 55 2000.0 3105
16 47 D/7343-31 T521D476M016A(1)E070 75.2 10 70 1800.0 3105
16 47 D/7343-31 T521D476M016A(1)E090 75.2 10 90 1600.0 3105
16 68 V/7343-20 T521V686M016A(1)E050 108.8 10 50 1900.0 3105
16 68 V/7343-20 T521V686M016A(1)E090 108.8 10 90 1400.0 3105
16 100 V/7343-20 T521V107M016A(1)E050 160.0 10 50 1900.0 3125
16 100 D/7343-31 T521D107M016A(1)E050 160.0 10 50 2100.0 3105
16 150 X/7343-43 T521X157M016A(1)E080 240.0 10 80 1800.0 3105
16 220 X/7343-43 T521X227M016A(1)E035 352.0 10 35 2700.0 3125
16 220 X/7343-43 T521X227M016A(1)E050 352.0 10 50 2200.0 3125
16 330 X/7343-43 T521X337M016A(1)E025 528.0 10 25 3100.0 3125
16 330 X/7343-43 T521X337M016A(1)E050 528.0 10 50 2200.0 3125
20 22 V/7343-20 T521V226M020A(1)E090 44.0 10 90 1400.0 3125
20 47 V/7343-20 T521V476M020A(1)E090 94.0 10 90 1400.0 3125
20 47 V/7343-20 T521V476M020A(1)E055 94.0 10 55 1800.0 3125
20 47 D/7343-31 T521D476M020A(1)E055 94.0 10 55 2000.0 3125
25 15 V/7343-20 T521V156M025A(1)E090 37.5 10 90 1400.0 3105
25 22 V/7343-20 T521V226M025A(1)E060 55.0 10 60 1800.0 3105
25 22 V/7343-20 T521V226M025A(1)E090 55.0 10 90 1400.0 3105
25 33 V/7343-20 T521V336M025A(1)E060 82.5 10 60 1800.0 3105
25 33 D/7343-31 T521D336M025A(1)E060 82.5 10 60 1900.0 3105
25 100 X/7343-43 T521X107M025A(1)E060 250.0 10 60 2000.0 3105
35 15 V/7343-20 T521V156M035A(1)E100 52.5 10 100 1400.0 3125
35 15 V/7343-20 T521V156M035A(1)E125 52.5 10 125 1200.0 3125
35 33 D/7343-31 T521D336M035A(1)E065 115.5 10 65 1900.0 3125
35 47 X/7343-43 T521X476M035A(1)E030 164.5 10 30 2900.0 3125
35 47 X/7343-43 T521X476M035A(1)E070 164.5 10 70 1900.0 3125
50 6.8 D/7343-31 T521D685M050A(1)E070 34.0 10 70 1800.0 3125
50 6.8 D/7343-31 T521D685M050A(1)E090 34.0 10 90 1600.0 3125
50 10 D/7343-31 T521D106M050A(1)E090 50.0 10 90 1600.0 3125
50 10 D/7343-31 T521D106M050A(1)E120 50.0 10 120 1369.0 3125
50 18 X/7343-43 T521X186M050A(1)E070 90.0 10 70 1900.0 3125
50 22 X/7343-43 T521X226M050A(1)E075 110.0 10 75 1815.0 3125
50 33 X/7343-43 T521X336M050A(1)E075 165.0 10 75 1815.0 3125
63 4.7 D/7343-31 T521D475M063A(1)E300 29.6 10 300 900.0 3125
63 4.7 D/7343-31 T521D475M063A(1)E075 29.6 10 75 1700.0 3125
63 10 X/7343-43 T521X106M063A(1)E050 63.0 10 50 2200.0 3125
63 15 X/7343-43 T521X156M063A(1)E035 94.5 10 35 2600.0 3125
63 15 X/7343-43 T521X156M063A(1)E150 94.5 10 150 1300.0 3125
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ 20°C
Max/5 Min
%@ 20°C
120 Hz Max
mΩ @ 20°C
100 kHz Max
(mA) +45ºC 100 kHz
Temp 260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20°C
Max/5 Min
%@ 20°C
120 Hz Max
mΩ @ 20°C
100 kHz Max
(mA) +45ºC 100 kHz Temp ≤ 260ºCC)
16 47 V/7343-20 T521V476M016A(1)E080 75.2 10 80 1500.0 3105
16 47 D/7343-31 T521D476M016A(1)E045 75.2 10 45 2200.0 3105
16 47 D/7343-31 T521D476M016A(1)E055 75.2 10 55 2000.0 3105
16 47 D/7343-31 T521D476M016A(1)E070 75.2 10 70 1800.0 3105
16 47 D/7343-31 T521D476M016A(1)E090 75.2 10 90 1600.0 3105
16 68 V/7343-20 T521V686M016A(1)E050 108.8 10 50 1900.0 3105
16 68 V/7343-20 T521V686M016A(1)E090 108.8 10 90 1400.0 3105
16 100 V/7343-20 T521V107M016A(1)E050 160.0 10 50 1900.0 3125
16 100 D/7343-31 T521D107M016A(1)E050 160.0 10 50 2100.0 3105
16 150 X/7343-43 T521X157M016A(1)E080 240.0 10 80 1800.0 3105
16 220 X/7343-43 T521X227M016A(1)E035 352.0 10 35 2700.0 3125
16 220 X/7343-43 T521X227M016A(1)E050 352.0 10 50 2200.0 3125
16 330 X/7343-43 T521X337M016A(1)E025 528.0 10 25 3100.0 3125
16 330 X/7343-43 T521X337M016A(1)E050 528.0 10 50 2200.0 3125
20 22 V/7343-20 T521V226M020A(1)E090 44.0 10 90 1400.0 3125
20 47 V/7343-20 T521V476M020A(1)E090 94.0 10 90 1400.0 3125
20 47 V/7343-20 T521V476M020A(1)E055 94.0 10 55 1800.0 3125
20 47 D/7343-31 T521D476M020A(1)E055 94.0 10 55 2000.0 3125
25 15 V/7343-20 T521V156M025A(1)E090 37.5 10 90 1400.0 3105
25 22 V/7343-20 T521V226M025A(1)E060 55.0 10 60 1800.0 3105
25 22 V/7343-20 T521V226M025A(1)E090 55.0 10 90 1400.0 3105
25 33 V/7343-20 T521V336M025A(1)E060 82.5 10 60 1800.0 3105
25 33 D/7343-31 T521D336M025A(1)E060 82.5 10 60 1900.0 3105
25 100 X/7343-43 T521X107M025A(1)E060 250.0 10 60 2000.0 3105
35 15 V/7343-20 T521V156M035A(1)E100 52.5 10 100 1400.0 3125
35 15 V/7343-20 T521V156M035A(1)E125 52.5 10 125 1200.0 3125
35 33 D/7343-31 T521D336M035A(1)E065 115.5 10 65 1900.0 3125
35 47 X/7343-43 T521X476M035A(1)E030 164.5 10 30 2900.0 3125
35 47 X/7343-43 T521X476M035A(1)E070 164.5 10 70 1900.0 3125
50 6.8 D/7343-31 T521D685M050A(1)E070 34.0 10 70 1800.0 3125
50 6.8 D/7343-31 T521D685M050A(1)E090 34.0 10 90 1600.0 3125
50 10 D/7343-31 T521D106M050A(1)E090 50.0 10 90 1600.0 3125
50 10 D/7343-31 T521D106M050A(1)E120 50.0 10 120 1369.0 3125
50 18 X/7343-43 T521X186M050A(1)E070 90.0 10 70 1900.0 3125
50 22 X/7343-43 T521X226M050A(1)E075 110.0 10 75 1815.0 3125
50 33 X/7343-43 T521X336M050A(1)E075 165.0 10 75 1815.0 3125
63 4.7 D/7343-31 T521D475M063A(1)E300 29.6 10 300 900.0 3125
63 4.7 D/7343-31 T521D475M063A(1)E075 29.6 10 75 1700.0 3125
63 10 X/7343-43 T521X106M063A(1)E050 63.0 10 50 2200.0 3125
63 15 X/7343-43 T521X156M063A(1)E035 94.5 10 35 2600.0 3125
63 15 X/7343-43 T521X156M063A(1)E150 94.5 10 150 1300.0 3125
VDC µF KEMET/EIA
(See below for
part options)
µA @ 20°C
Max/5 Min
%@ 20°C
120 Hz Max
mΩ @ 20°C
100 kHz Max
(mA) +45ºC 100 kHz Temp ≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity Rated Temp
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 80
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
100%
-55 25 45 85 105 125
% Rated Voltage
Temperature (°C)
Maximum Transient Voltage
Recommended Application Voltage
Derating Guidelines
Voltage
Rating
Maximum
Recommended Steady
State Voltage
Maximum Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 105°C
16 V ≤ VR ≤ 63 V 80% of VRVR
105°C to 125°C
16 V ≤ VR ≤ 63 V 54% of VR67% of VR
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C
with +30°C Rise
T
3528-12
105
M
3528-15
120
A
3216-18
112
B
3528-21
127
U
6032-15
135
L
6032-19
150
C
6032-28
165
W
7343-15
180
V
7343-20
187
D
7343-31
225
Y
7343-40
241
X
7343-43
247
H
7360-20
187
I
3216-10
95
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 81
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 82
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Polymer /Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 83
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2016_T521 8/5/2013 99
KEMET Organic Capacitor (KO-CAP) – T521 High Voltage Polymer Tantalum
Capacitor Marking
(KO)
KEMET
Organic
Polymer
Rated
Voltage
336
25 K
230
KO Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
All KOCAP series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 84
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 1
One world. One KEMET
Bene ts
ESR: 25 to 40 mΩ
-55°C to 105°C operating temperature range
Polymer cathode technology
High frequency capacitance retention
Non-ignition failure mode
Capacitance: 150 to 470 µF
Voltage: 6.3 V
100% accelerated steady state aging
100% surge current tested
Low profi le designs
Volumetric effi ciency
Self-healing mechanism
EIA standard case sizes
Applications
Typical applications include battery-dependent applications such
as handheld consumer electronics, global tracking systems,
energy harvesting, wireless sensors and other applications
that seek high capacitance, low profi le, safety and low power
consumption.
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum
capacitor with a Ta anode and Ta2O5 dielectric. A conductive
organic polymer replaces the traditionally used MnO2 as the
cathode plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-CAP
also exhibits a benign failure mode which eliminates the ignition
failures that can occur in standard MnO2 tantalum types.
KO-CAPs may also be operated at steady state voltages up to
90% of rated voltage for part types with rated voltages of ≤ 10.
The T522 Reduced Leakage Polymer Tantalum Series is designed
to meet the needs of leakage-sensitive applications such as
battery supported circuits. The T522 Series offers the lowest
leakage values available in polymer tantalum capacitors with upper
leakage limits that are up to 70% lower than other polymer series.
KEMET Organic Capacitor (KO-CAP)
T522 Reduced Leakage Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 85
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
Ordering Information
T522 V157 M006 A T E025
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
522 =
Reduced
Leakage
Polymer
V, Y First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
M = ±20% 006 = 6.3 V A = N/A T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (025 = 25
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item Performance Characteristics
Operating Temperature -55°C to 105°C
Rated Capacitance Range 150 – 470 uF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 6.3 V
DF (120 Hz) ≤ 10%
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table 1
Leakage Current ≤ 0.03 CV (μA) at rated voltage after 10 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 86
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
Quali cation
Test Condition Characteristics
Endurance 105°C @ rated voltage, 2,000 hours
Δ C/C Within -20/+10% of initial value
DF Within initial limits
DCL Within 1.5 x initial limit
ESR Within 2.0 x initial limit
Storage Life 105°C @ 0 volts, 2,000 hours
Δ C/C
Within -20/+10% of initial value
DF Within initial limits
DCL Within 1.5 x initial limit
ESR Within 2.0 x initial limit
Humidity 60°C, 90% RH, 1,000 hours, rated voltage
Δ C/C Within -5%/+35% of initial value
DF Within initial limits
DCL Within 5.0 x initial limit
ESR Within 2.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +10/125°C, +25°C
+2C -55°C +85°C +105ºC
Δ C/C IL* ±20% ±20% ±30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105°C, 1.32 x rated voltage, 33 Ω Resistance, 1,000 cycles
Δ C/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak.
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 87
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
1
10
100
1000
1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T522V157M006ATE040_Capacitance
T522V227M006ATE025_Capacitance
T522V337M006ATE040_Capacitance
Capacitance vs. Frequency
Impedance & ESR vs. Frequency
0.01
0.1
1
1,000 10,000 100,000 1,000,000 10,000,000
Impedance & ESR (Ω)
Frequency (Hz)
T522V157M006ATE040_Impedance
T522V227M006ATE025_Impedance
T522V337M006ATE040_Impedance
T522V157M006ATE040_ESR
T522V227M006ATE025_ESR
T522V337M006ATE040_ESR
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ± 0.1
± (.004)
S* ± 0.3
± (.012)
B* ± 0.15
(Ref) ± .006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
V7343-19
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.9 (.075) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Y7343-40
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 (.157)
maximum
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
Electrical Characteristics
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 88
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
Table 1 – Ratings & Part Number Reference
Other part number options:
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA
(See below for
part options)
µA @ +20°C
Max/10 Min.
% @ +20°C
120 Hz Max
mΩ @ +20°C
100 kHz Max (mA) +45°C 100 kHz
Temperature
≤ 260ºC C)
6.3 150 V/7343-19 T522V157M006A(1)E025 28 10 25 2700 3105
6.3 150 V/7343-19 T522V157M006A(1)E040 28 10 40 2200 3105
6.3 220 V/7343-19 T522V227M006A(1)E025 42 10 25 2700 3105
6.3 220 V/7343-19 T522V227M006A(1)E040 42 10 40 2200 3105
6.3 330 V/7343-19 T522V337M006A(1)E040 62 10 40 2200 3105
6.3 470 Y/7343-40 T522Y477M006A(1)E035 89 10 35 2600 3105
VDC µF KEMET/EIA
(See below for
part options)
µA @ +20°C
Max/10 Min.
% @ +20°C
120 Hz Max
mΩ @ +20°C
100 kHz Max
(mA) +45°C 100 kHz
Temperature
≤ 260ºC
C)
Rated
Voltage
Rated
Capacatiance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
T522 V157 M006 A T E025
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
522 =
Reduced
Leakage
Polymer
V, Y First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
M = ±20% 006 = 6.3 V A = N/A T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
E = ESR
Last three digits
specify ESR in
mΩ. (025 = 25
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 89
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
-55 25 45 85 105
% Rated Voltage
Temperature (°C)
Maximum Transient Voltage
Recommended Application Voltage
Derating Guidelines
Voltage
Rating
Maximum
Recommended Steady
State Voltage
Maximum Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 105°C
6.3 V 90% of V
R
V
R
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
+30°C Rise
T520T
3528-12
105
T520M
3528-15
120
T520A
3216-18
112
T520B
3528-21
127
T520U
6032-15
135
T520L
3528-19
150
T520C
6032-28
165
T520W
7343-15
180
T520V /T522V
7343-19
187
T520D
7343-31
225
T520Y/T522Y
7343-40
241
T520X
7343-43
247
T520H
7360-20
187
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 90
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 91
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profi le
conditions for convection and IR refl ow refl ect the profi le conditions
of the IPC/JSTD020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three refl ow
passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (T
Smax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z
Construction
Polymer /Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 92
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2030_T522 8/5/2013 99
KEMET Organic Capacitor (KO-CAP) – T522 Reduced Leakage Polymer Tantalum
Capacitor Marking
(KO)
KEMET
Organic
Polymer
Rated
Voltage
157
6 K
242
KO Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 242 = 42nd week of 2012
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 =2011
2 = 2012
3 = 2013
4 =2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. This series is classifi ed as MSL3
(Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working environments with
temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 93
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 1
One world. One KEMET
Bene ts
Polymer cathode technology
125°C maximum operating temperature
High frequency capacitance retention
Non-ignition failure mode
Capacitance: 10 µF to 680 µF
Voltage: 2.5 V to 16 V
Use up to 90% of rated voltage (10% derating) for part types ≤ 10 V
Use up to 80% of rated voltage (20% derating) for part types > 10 V
100% surge current tested
Self-healing mechanism
Volumetrically ef cient
EIA standard case sizes
RoHS Compliant and Halogen Free
Applications
Typical applications include automotive, industrial and military as
per DSCC 04051.
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum
capacitor with a Ta anode and Ta2O5 dielectric. A conductive
organic polymer replaces the traditionally used MnO2 as the
cathode plate of the capacitor. This results in very low ESR
and improved capacitance retention at high frequency. The
KO-CAP also exhibits a benign failure mode which eliminates
the ignition failures that can occur in standard MnO2 tantalum
types. KO-CAPs may also be operated at steady state voltages
up to 90% of rated voltage for part types with rated voltages of
≤ 10 volts and up to 80% of rated voltage for part types > 10 volts
with equivalent or better reliability than traditional MnO2 tantalum
capacitors operated at 50% of rated voltage. The T525 Series KO-
CAP Low ESR Polymer is KEMETs 125°C rated tantalum polymer
capacitor. This part offers the same advantages as the T520
Series such as low ESR, high frequency capacitance retention
and a benign failure mode. The T525 Series is often the series of
choice when considering automotive or industrial type applications.
KEMET Organic Capacitor (KO-CAP)
T525 125°C Rated Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 94
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T525 D337 M006 A T E800
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Packaging
(C-Spec)
T =
Tantalum
525 =
12C
Rated
Polymer
A, B, D, T,
V, Y
First two digits
represent
signifi cant
gures. Third digit
specifi es number
of zeros.
M = ±20% 2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
Last three
digits specify
ESR in mΩ.
(800 = 800
mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 22 – 680 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 2.5 – 16 V
DF (120 Hz) ≤ 10%
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 95
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
Quali cation
Test Condition Characteristics
Endurance 125°C @ 2/3 rated voltage, 2,000 hours
Δ C/C Within -20%/+10% of initial value
DF ≤ Initial Limit
DCL 2 x IL @ 125ºC
ESR 2 x Initial Limit
Storage Life 125°C @ 0 volts, 2,000 hours
Δ C/C
Within -20%/+10% of initial value
DF Within initial limits
DCL Within 2.0 x initial limit
ESR Within initial limit
Humidity 60°C, 90% RH, 1,000 hours, No Load
Δ C/C Within -5%/+35% of initial value
DF ≤ Initial Limit
DCL Within 3.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +125ºC, +25ºC
+2C
-55°C
+85°C
+125°C
Δ C/C IL* ±20% ±20% ±30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105°C, 1.32 x rated voltage, 33 Ω Resistance, 1,000 cycles
Δ C/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak.
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 96
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
Electrical Characteristics
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T525B686M006ATE080
T525D337M006ATE040
T525D337M006ATE025
Capacitance vs. Frequency
ESR vs. Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T525B686M006ATE080_Imp
T525D337M006ATE040_Imp
T525D337M006ATE025_Imp
T525B686M006ATE080_ESR
T525D337M006ATE040_ESR
T525D337M006ATE025_ESR
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216-18
3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ± 0.008)
1.6 ±0.2
(0.063 ±0.008)
1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ±0.10
(0.004 ±0.004)
0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
B352821
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.9 ±0.2
(0.075 ±0.008)
2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ±0.10
(0.004 ±0.004)
0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
D734331
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ±0.10
(0.004 ±0.004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
T3528–12
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.2 (.047) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
V7343–20
7.3 ±0.3
(0.287 ±0.012)
4.3 ± 0.3
(.169 ± .012)
2.0 Maximum 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Y734340
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 (.157) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 97
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
T525 D337 M006 A T E800
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
Packaging
(C-Spec)
T =
Tantalum
525 =
125°C
Rated
Polymer
A, B, D, T,
V, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
Last three
digits
specify ESR
in mΩ. (800
= 800 mΩ)
Blank = 7" Reel
7280 = 13" Reel
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert T = standard Tin terminations or H = Tin/lead terminations
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @+20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ +20ºC
100 kHz Max
(mA) 100 kHz +45ºC
Temp 260ºC
(ºC)
2.5 100 T/3528-12 T525T107M2R5A(1)E080 25.0 10 80 1100.0 3125
2.5 330 D/7343-31 T525D337M2R5A(1)E025 82.5 10 25 3000.0 3125
2.5 470 D/7343-31 T525D477M2R5A(1)E025 117.5 10 25 3000.0 3125
2.5 680 D/7343-31 T525D687M2R5A(1)E025 170.0 10 25 3000.0 3125
3100 B/3528-21 T525B107M003A(1)E080 30.0 880 1300.0 3125
3150 B/3528-21 T525B157M003A(1)E080 45.0 880 1300.0 3125
3330 D/7343-31 T525D337M003A(1)E025 99.0 10 25 3000.0 3125
3470 D/7343-31 T525D477M003A(1)E025 141.0 10 25 3000.0 3125
3680 D/7343-31 T525D687M003A(1)E025 204.0 10 25 3000.0 3125
468 T/3528-12 T525T686M004A(1)E080 27.2 880 1100.0 3125
468 B/3528-21 T525B686M004A(1)E080 27.2 880 1300.0 3125
4100 B/3528-21 T525B107M004A(1)E080 40.0 880 1300.0 3125
4220 D/7343-31 T525D227M004A(1)E025 88.0 10 25 3000.0 3125
4330 D/7343-31 T525D337M004A(1)E025 132.0 10 25 3000.0 3125
4470 D/7343-31 T525D477M004A(1)E025 188.0 10 25 3000.0 3125
4470 D/7343-31 T525D477M004A(1)E040 188.0 10 40 2400.0 3125
6.3 33 B/3528-21 T525B336M006A(1)E080 20.8 880 1300.0 3125
6.3 47 T/3528-12 T525T476M006A(1)E080 29.6 880 110 0.0 3125
6.3 47 B/3528-21 T525B476M006A(1)E070 29.6 870 1300.0 3125
6.3 47 B/3528-21 T525B476M006A(1)E080 29.6 880 1300.0 3125
6.3 68 B/3528-21 T525B686M006A(1)E080 42.8 8 80 1300.0 3125
6.3 150 D/7343-31 T525D157M006A(1)E025 94.5 10 25 3000.0 3125
6.3 220 D/7343-31 T525D227M006A(1)E025 138.6 10 25 3000.0 3125
6.3 330 D/7343-31 T525D337M006A(1)E025 207.9 10 25 3000.0 3125
6.3 330 D/7343-31 T525D337M006A(1)E040 207.9 10 40 2400.0 3125
6.3 470 Y/7343-40 T525Y477M006A(1)E035 296.1 10 35 2600.0 3125
833 T/3528-12 T525T336M008A(1)E080 26.4 880 1100.0 3125
10 10 A/3216-18 T525A106M010A(1)E080 10.0 880 1200.0 3125
10 22 B/3528-21 T525B226M010A(1)E080 22.0 880 1300.0 3125
10 33 T/3528-12 T525T336M010A(1)E080 33.0 880 1100.0 3125
10 33 B/3528-21 T525B336M010A(1)E080 33.0 880 1300.0 3125
10 100 D/7343-31 T525D107M010A(1)E025 100.0 10 25 3000.0 3125
10 100 D/7343-31 T525D107M010A(1)E055 100.0 10 55 2000.0 3125
10 150 D/7343-31 T525D157M010A(1)E025 150.0 10 25 3000.0 3125
10 150 D/7343-31 T525D157M010A(1)E055 150.0 10 55 2000.0 3125
10 220 D/7343-31 T525D227M010A(1)E025 220.0 10 25 3000.0 3125
10 330 Y/7343-40 T525Y337M010A(1)E035 330.0 10 35 2600.0 3125
16 47 D/7343-31 T525D476M016A(1)E035 75.2 10 35 2500.0 3125
16 47 D/7343-31 T525D476M016A(1)E065 75.2 10 65 1900.0 3125
VDC
µF
KEMET/EIA
(See below for
part options)
µA @+20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ +20ºC
100 kHz Max
(mA) 100 kHz +45ºC
Temp 260ºC
(ºC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert T = standard Tin terminations or H = Tin/lead terminations
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA
(See below for
part options)
µA @+20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ +2C
100 kHz Max
(mA) 100 kHz +45ºC Temp ≤ 260ºC C)
2.5 100 T/3528-12 T525T107M2R5A(1)E080 25.0 10 80 1100.0 3125
2.5 330 D/7343-31 T525D337M2R5A(1)E025 82.5 10 25 3000.0 3125
2.5 470 D/7343-31 T525D477M2R5A(1)E025 117.5 10 25 3000.0 3125
2.5 680 D/7343-31 T525D687M2R5A(1)E025 170.0 10 25 3000.0 3125
3100 B/3528-21 T525B107M003A(1)E080 30.0 880 1300.0 3125
3150 B/3528-21 T525B157M003A(1)E080 45.0 880 1300.0 3125
3330 D/7343-31 T525D337M003A(1)E025 99.0 10 25 3000.0 3125
3470 D/7343-31 T525D477M003A(1)E025 141.0 10 25 3000.0 3125
3680 D/7343-31 T525D687M003A(1)E025 204.0 10 25 3000.0 3125
468 T/3528-12 T525T686M004A(1)E080 27.2 880 1100.0 3125
468 B/3528-21 T525B686M004A(1)E080 27.2 880 1300.0 3125
4100 B/3528-21 T525B107M004A(1)E080 40.0 880 1300.0 3125
4220 D/7343-31 T525D227M004A(1)E025 88.0 10 25 3000.0 3125
4330 D/7343-31 T525D337M004A(1)E025 132.0 10 25 3000.0 3125
4470 D/7343-31 T525D477M004A(1)E025 188.0 10 25 3000.0 3125
4470 D/7343-31 T525D477M004A(1)E040 188.0 10 40 2400.0 3125
6.3 33 B/3528-21 T525B336M006A(1)E080 20.8 880 1300.0 3125
6.3 47 T/3528-12 T525T476M006A(1)E080 29.6 880 110 0.0 3125
6.3 47 B/3528-21 T525B476M006A(1)E070 29.6 870 1300.0 3125
6.3 47 B/3528-21 T525B476M006A(1)E080 29.6 880 1300.0 3125
6.3 68 B/3528-21 T525B686M006A(1)E080 42.8 8 80 1300.0 3125
6.3 150 D/7343-31 T525D157M006A(1)E025 94.5 10 25 3000.0 3125
6.3 220 D/7343-31 T525D227M006A(1)E025 138.6 10 25 3000.0 3125
6.3 330 D/7343-31 T525D337M006A(1)E025 207.9 10 25 3000.0 3125
6.3 330 D/7343-31 T525D337M006A(1)E040 207.9 10 40 2400.0 3125
6.3 470 Y/7343-40 T525Y477M006A(1)E035 296.1 10 35 2600.0 3125
833 T/3528-12 T525T336M008A(1)E080 26.4 880 1100.0 3125
10 10 A/3216-18 T525A106M010A(1)E080 10.0 880 1200.0 3125
10 22 B/3528-21 T525B226M010A(1)E080 22.0 880 1300.0 3125
10 33 T/3528-12 T525T336M010A(1)E080 33.0 880 1100.0 3125
10 33 B/3528-21 T525B336M010A(1)E080 33.0 880 1300.0 3125
10 100 D/7343-31 T525D107M010A(1)E025 100.0 10 25 3000.0 3125
10 100 D/7343-31 T525D107M010A(1)E055 100.0 10 55 2000.0 3125
10 150 D/7343-31 T525D157M010A(1)E025 150.0 10 25 3000.0 3125
10 150 D/7343-31 T525D157M010A(1)E055 150.0 10 55 2000.0 3125
10 220 D/7343-31 T525D227M010A(1)E025 220.0 10 25 3000.0 3125
10 330 Y/7343-40 T525Y337M010A(1)E035 330.0 10 35 2600.0 3125
16 47 D/7343-31 T525D476M016A(1)E035 75.2 10 35 2500.0 3125
16 47 D/7343-31 T525D476M016A(1)E065 75.2 10 65 1900.0 3125
VDC µF KEMET/EIA
(See below for
part options)
µA @+20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ +2C
100 kHz Max
(mA) 100 kHz +45ºC Temp ≤ 260ºC C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity Rated Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 98
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
Derating Guidelines
Voltage
Rating
Maximum Recommended
Steady State Voltage
Maximum Recommended
Transient Voltage
(1ms – 1µs)
-55°C to 105°C
2.5 V ≤ VR ≤ 10 V 90% of VRVR
12.5 V ≤ VR ≤ 16 V 80% of VRVR
105°C to 125°C
2.5 V ≤ VR ≤ 10 V 60% of VR67% of VR
12.5 V ≤ VR ≤ 16 V 54% of VR67% of VR
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C
with +30°C Rise
T
3528-12
105
M
3528-15
120
A
3216-18
112
B
3528-21
127
U
6032-15
135
L
6032-19
150
C
6032-28
165
W
7343-15
180
V
7343-20
187
D
7343-31
225
Y
7343-40
241
X
7343-43
247
H
7360-20
187
I
3216-10
95
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
100%
-55 25 45 85 105 125
% Rated Voltage
Temperature (°C)
Maximum Transient Voltage
Recommended Application Voltage V
r
10V
Recommended Application Voltage V
r
> 10V
67%
60%
53%
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 99
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 100
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Polymer /Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 101
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2017_T525 8/5/2013 99
KEMET Organic Capacitor (KO-CAP) – T525 125°C Rated Polymer Tantalum
Capacitor Marking
(KT)
KEMET
High Temp
Polymer
Rated
Voltage
686
6 K
230
KT Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
All KO-CAP series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 102
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 1
One world. One KEMET
Bene ts
Polymer cathode technology
EIA Case Size: 3216 (1206 MLCC Equivalent)
Low Profi le: 1.0 mm maximum
Non-ignition failure mode
Improved volumetric effi ciency
Self-healing mechanism
Capacitance: 22 – 100 µF
Use up to 90% of rated voltage (10% derating)
Voltage: 4 V – 10 V
RoHS Compliant and Halogen Free
105°C maximum temperature capability
Lead free 260°C refl ow capable
Applications
Typical applications include densely populated circuits where
space restrictions do not allow for larger and more commonly
available case sizes such as smart phones, digital cameras, MP3
players, GPS navigation systems, WiFi modules, analytical and
test equipment, and audio/sound circuits.
Overview
The KEMET Low ESR Polymer Series is a tantalum capacitor
with a Ta anode and Ta2O5 dielectric. A conductive organic
polymer replaces the traditionally used MnO2 as the cathode
plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-
CAP also exhibits a benign failure mode which eliminates the
ignition failures that can occur in standard MnO2 tantalum types.
KO-CAPs may also be operated at voltages up to 90% of rated
voltage for part types with rated voltages of ≤ 10 volts and up
to 80% of rated voltage for part types > 10 volts with equivalent
or better reliability than traditional MnO2 tantalum capacitors
operated at 50% of rated voltage.
The T527 Series KO-CAP combines improved packaging
ef ciency with a low profi le design through the use of facedown
terminal technology. This series offers high capacitance in a 3216-
10 (3.2 mm (L) x 1.6 mm (W) x 1.0 mm (H)) package size. The
T527 Series is ideal for use in densely populated circuits such as
smart phones and digital cameras where space restrictions do not
allow for larger and more commonly available case sizes.
KEMET Organic Capacitor (KO-CAP)
T527 Series Facedown Terminal Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC. Halogen free.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 103
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T527 Series Facedown Terminal Polymer Tantalum
Ordering Information
T527 I476 M 006 A T E200
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
527 =
Facedown
Terminal
Polymer
I = 3216 First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
e.g., 476 = 47 µF
M = ±20% 004 = 4 V
006 = 6.3 V
010 = 10 V
A = N/A T = 100% Tin
(Sn)
E = ESR
Last three digits
specify ESR in
mΩ (200 = 200
mΩ)
Blank = 7"
Reel
Performance Characteristics
Item Speci cations
Operating Temperature -55°C to 105°C
Rated Capacitance Range 22 µF to 100 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 4 – 10 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current Refer to Part Number Electrical Specifi cation Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 104
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T527 Series Facedown Terminal Polymer Tantalum
Quali cation
Test Condition/Characteristics
Endurance 85°C @ rated voltage, 1,000 hours
Δ C/C Within initial Δ C/C limits
DF Within 1.5 x initial limits
DCL Within initial limits
Damp Heat Steady State 40°C, 90 to 95% RH, 500 hours
Δ C/C -30% to +20% of initial Δ C/C limit
DF Within 1.5 x initial limits
DCL Within initial limits
Temperature Stability Extreme temperature exposure at
-55°C and +105°C
+2C -55°C +105°C
Δ C/C I L* -20% to 0% of Δ C/C -50% - 0% of Δ C/C
DF IL IL IL
DCL IL IL 1.00 CV
Surge Voltage 1.3 Vr, 85°C, 1,000 Ω resistor, 1,000 cycles
Δ C/C Within initial Δ C/C limits
DF Within initial limit
DCL Within initial limit
Mechanical Shock 100 G, Saw-Tooth wave
Δ C/C
Within initial Δ C/C limits
DF Within initial limit
DCL Within initial limit
Vibration
Frequency: 10 to 2 kHz, Sweep: 1 minute,
Amplitude of vibration: 1.5 mm, Vibration Time:
Each plane shall be 2 hours for a total of 4 hours.
Δ C/C Within initial Δ C/C limits
DF Within initial limit
DCL Within initial limit
Terminal strength
Strength: 4.9 N, Time: 10 ±0.5 seconds
(two directions)
Visual No evidence of mechanical damage
*IL = Initial limit
Dimensions – Millimeters
Case Size
Component
KEMET EIA L W H F S
I3216–10 3.2 ±0.2 1.6 ±0.2 1.0 Maximum 1.2 ±0.1 0.8 ±0.2
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 105
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T527 Series Facedown Terminal Polymer Tantalum
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp.
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +25ºC
Maximum/
5 Minutes
% @ +25ºC
120 Hz
Maximum
mΩ @ +25ºC
100 kHz
Maximum
(mA) +45ºC 100 kHz
Temp 260ºC
°C
4100 I/3216-10 T527I107M004ATE200 40.0 8200 775 3105
647 I/3216-10 T527I476M006ATE200 29.6 6200 632 3105
6100 I/3216-10 T527I107M006ATE100 63.0 8100 775 3105
6100 I/3216-10 T527I107M006ATE070 63.0 870 1134 3105
10 22 I/3216-10 T527I226M010ATE200 22.0 8200 548 3105
10 33 I/3216-10 T527I336M010ATE200 33.0 6200 548 3105
10 47 I/3216-10 T527I476M010ATE200 47.0 6200 548 3105
Refer to Ordering Information for additional detail.
Derating Guidelines
Voltage Rating
-55°C to 85°C
85°C to 105°C
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
10 V
90% of VR
VR
See Chart
VR
VR = Rated Voltage
50%
60%
70%
80%
90%
100%
110%
-55 25 85 105
Maximum Transient Voltage
Recommended Application
Voltage 80%
Roll Over for
Order Info.
T527 I476 M 006 A T E200
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
527 =
Facedown
Terminal
Polymer
I
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
004 = 4 V
006 = 6.3 V
010 = 10 V
A = N/A
T = 100% Tin
(Sn)
E = ESR Last
three digits
specify ESR in
mΩ (200 = 200
mΩ)
Blank = 7"
Reel
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp.
VDC µF KEMET/EIA (See below for
part options)
µA @ +25ºC
Maximum/
5 Minutes
% @ +25ºC
120 Hz
Maximum
mΩ @ +25ºC
100 kHz
Maximum
(mA) +45ºC 100 kHz Temp ≤ 260ºC°C
4100 I/3216-10 T527I107M004ATE200 40.0 8200 775 3105
647 I/3216-10 T527I476M006ATE200 29.6 6200 632 3105
6100 I/3216-10 T527I107M006ATE100 63.0 8100 775 3105
6100 I/3216-10 T527I107M006ATE070 63.0 870 1134 3105
10 22 I/3216-10 T527I226M010ATE200 22.0 8200 548 3105
10 33 I/3216-10 T527I336M010ATE200 33.0 6200 548 3105
10 47 I/3216-10 T527I476M010ATE200 47.0 6200 548 3105
Refer to Ordering Information for additional detail.
Derating Guidelines
Voltage Rating
-55°C to 85°C
85°C to 105°C
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
≤ 10 V 90% of V
R
V
R
See Chart V
R
VR = Rated Voltage
50%
60%
70%
80%
90%
100%
110%
-55 25 85 105
Maximum Transient Voltage
Recommended Application
Voltage
80%
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 106
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T527 Series Facedown Terminal Polymer Tantalum
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the
device. Permissible AC ripple voltage which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specifi ed for reverse
voltage. See the Reverse Voltage section for allowable limits.
The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45°C < T ≤ 85°C
85°C < T ≤ 105°C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
+30°C Rise
I
3216
60
P
2012
25
The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier
table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 107
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T527 Series Facedown Terminal Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For Series Rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric Size
Code Dimensions in mm
Case
EIA
G Maximum
Z Minimum
X Minimum
Y ref
I3216–10 1.65 3.25 1.10 0.80
P2012–10 1.05 2.05 0.80 0.50
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 108
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T527 Series Facedown Terminal Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 109
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2069_T527 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T527 Series Facedown Terminal Polymer Tantalum
Capacitor Marking
Polarity
Indicator (+)
Voltage and
Capacitance Code
Date
Code*
E jS7
Date Code *
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
2013 A B CDEF G H J KLM
2014 N P QR S TU V W X Y Z
2015 abcdef g h jklm
2016 npqr s t u v w x y z
Code g j A
Rated Voltage 4 V 6 V 10 V
Code J7 N7 S7 W7 A8
Capacitance 22 33 47 68 100
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 3C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 110
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2018_T528 • 8/5/2013 1
One world. One KEMET
Bene ts
Polymer cathode technology
100% accelerated steady state aging
Low ESL <0.7 nH @ 20 MHz
100% surge current tested
High frequency capacitance retention
Non-ignition failure mode
Improved volumetric effi ciency
Self-healing mechanism
Capacitance: 33 µF to 470 µF
Use up to 90% of rated voltage (10% derating)
Voltage: 2 V to 10 V
RoHS compliant and Halogen Free
105°C maximum temperature capability
Lead free 260°C refl ow capable
Applications
Typical applications include high speed server, microprocessor
decoupling and high ripple current applications.
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum
capacitor with a Ta anode and Ta2O5 dielectric. A conductive
organic polymer replaces the traditionally used MnO2 as the
cathode plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-CAP
also exhibits a benign failure mode which eliminates the ignition
failures that can occur in standard MnO2 tantalum types. KO-
CAPs may also be operated at steady state voltages up to 90%
of rated voltage for part types with rated voltages of ≤ 10 volts
and up to 80% of rated voltage for part types > 10 volts with
equivalent or better reliability than traditional MnO2 tantalum
capacitors operated at 50% of rated voltage.
The T528 Series KO-CAP combines ultra-low ESR and high
capacitance in a package design that offers the lowest ESL in
the market for this type of product. This series offers exceptional
performance for high-speed server and microprocessor decoupling
– designs that are driving the demand for low inductance chips.
The T528 uses a different termination design that allows for a
reduction in the inductance loop area and comes in a low profi le
1.7 mm case height. These product features offer the advantage of
improved capacitance retention at frequencies of up to 1 MHz.
KEMET Organic Capacitor (KO-CAP)
T528 Low ESL/Facedown Terminal Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 111
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T528 Z337 M2R5 A T E009
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
528 =
Low ESL
Facedown
Terminal
Polymer
B, I, K, W, Z First two digits
represent
signifi cant
gures. Third digit
specifi es number
of zeros.
M = ±20% 002 = 2 V
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
A = N/A T = 100%
Matte Tin (Sn)
Plated
P = Ni-Pd-Au
Plated
E = ESR
Last three digits
specify ESR in
mΩ (009 = 9 mΩ)
Blank = 7"
Reel 7280 =
13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 105°C
Rated Capacitance Range 33 – 470 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 2 – 10 V
DF (120 Hz) ≤ 10%
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 112
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
Quali cation
Test
Condition
Characteristics
Endurance 85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C @ 0 volts, 2,000 hours
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MILSTD–202, Method 107, Condition B, mounted, -55°C to
125°C, 1,000 cycles
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +125°C, +25°C
+2C
-55°C
+85°C
+125°C
Δ C/C IL* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10 of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 113
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
Electrical Characteristics
1
10
100
1000
1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T528Z337M2R5ATE012
T528Z337M2R5ATE009
T528Z337M2R5ATE007
Capacitance vs. Frequency
ESR vs. Frequency
0.001
0.01
0.1
1
10
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T528Z337M2R5ATE012_Imp
T528Z337M2R5ATE009_Imp
T528Z337M2R5ATE007_Imp
T528Z337M2R5ATE012_ESR
T528Z337M2R5ATE009_ESR
T528Z337M2R5ATE007_ESR
Dimensions – Millimeters
Case Size
Component
KEMET EIA L W H F ±0.2 S1 ±0.2 S2 ±0.2
I3216–10 3.2 ±0.2 1.6 ±0.2 1.0 Maximum 1.2 1.0 0.7
K3528–10 3.5 ±0.3 2.8 ±0.3 1.0 Maximum 2 1.2 0.6
B3528–20 3.2 ±0.2 2.8 ±0.2 2.0 Maximum 2.2 0.8 N/A
W7343–15 7.3 ±0.4 4.3 ±0.3 1.5 Maximum 2.8 5.1 1.3
Z7343–17 7.3 ±0.4 4.3 ±0.3 1.7 Maximum 2.8 5.1 1.3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 114
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
(mA) +45ºC 100 kHz
Temp 260ºC
2270 B/3528-21 T528B277M002APE006 54.0 8 6 3900 3
2270 B/3528-21 T528B277M002APE009 54.0 8 9 3200 3
2.5 220 Z/7343-18 T528Z227M2R5ATE006 55.0 10 67400 3
2.5 330 W/7343-15 T528W337M2R5ATE009 82.5 10 96000 3
2.5 330 Z/7343-18 T528Z337M2R5ATE005 82.5 10 58100 3
2.5 330 Z/7343-18 T528Z337M2R5ATE006 82.5 10 67400 3
2.5 330 Z/7343-18 T528Z337M2R5ATE007 82.5 10 76800 3
2.5 330 Z/7343-18 T528Z337M2R5ATE008 82.5 10 86400 3
2.5 330 Z/7343-18 T528Z337M2R5ATE009 82.5 10 96000 3
2.5 330 Z/7343-18 T528Z337M2R5ATE012 82.5 10 12 5200 3
2.5 470 Z/7343-18 T528Z477M2R5ATE005 117.5 10 58100 3
2.5 470 Z/7343-18 T528Z477M2R5ATE006 117.5 10 67400 3
2.5 470 Z/7343-18 T528Z477M2R5ATE008 117.5 10 86400 3
2.5 470 Z/7343-18 T528Z477M2R5ATE009 117.5 10 96000 3
2.5 470 Z/7343-18 T528Z477M2R5ATE012 117.5 10 12 5200 3
3100 I/3216-10 T528I107M003ATE150 30.0 10 150 800 3
3100 I/3216-10 T528I107M003ATE200 30.0 10 200 700 3
468 I/3216-10 T528I686M004ATE150 27. 2 10 150 800 3
468 I/3216-10 T528I686M004ATE200 27.2 10 200 700 3
4220 K/3528-10 T528K227M004ATE100 88.0 10 100 1200 3
4220 Z/7343-18 T528Z227M004ATE007 88.0 10 76800 3
4220 Z/7343-18 T528Z227M004ATE008 88.0 10 86400 3
4220 Z/7343-18 T528Z227M004ATE009 88.0 10 96000 3
4220 Z/7343-18 T528Z227M004ATE012 88.0 10 12 5200 3
4330 Z/7343-18 T528Z337M004ATE009 132.0 10 96000 3
4330 Z/7343-18 T528Z337M004ATE012 132.0 10 12 5200 3
6.3 47 I/3216-10 T528I476M006ATE150 29.6 10 150 800 3
6.3 47 I/3216-10 T528I476M006ATE200 29.6 10 200 700 3
6.3 150 K/3528-10 T528K157M006ATE200 94.5 10 200 900 3
6.3 150 K/3528-10 T528K157M006ATE100 94.5 10 100 1200 3
6.3 150 K/3528-10 T528K157M006ATE200 94.5 10 200 900 3
6.3 150 Z/7343-18 T528Z157M006ATE007 94.5 10 76800 3
6.3 150 Z/7343-18 T528Z157M006ATE008 94.5 10 86400 3
6.3 150 Z/7343-18 T528Z157M006ATE009 94.5 10 96000 3
6.3 150 Z/7343-18 T528Z157M006ATE012 94.5 10 12 5200 3
6.3 220 Z/7343-18 T528Z227M006ATE009 138.6 10 96000 3
6.3 220 Z/7343-18 T528Z227M006ATE012 138.6 10 12 5200 3
10 33 I/3216-10 T528I336M010ATE150 33.0 10 150 800 3
10 33 I/3216-10 T528I336M010ATE200 33.0 10 200 700 3
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
(mA) +45ºC 100 kHz
Temp 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Roll Over for
Order Info.
T528 Z337 M2R5 A T E009
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
528 =
Low ESL
Facedown
Terminal
Polymer
B, I, K, W, Z
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
002 = 2 V
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
A = N/A
T = 100%
Matte Tin (Sn)
Plated
P = Ni-Pd-Au
Plated
E = ESR
Last three digits
specify ESR in
mΩ (009 = 9 mΩ)
Blank = 7"
Reel 7280 =
13" Reel
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +2C
100 kHz
Maximum
(mA) +45ºC 100 kHz Temp ≤ 260ºC
2270 B/3528-21 T528B277M002APE006 54.0 8 6 3900 3
2270 B/3528-21 T528B277M002APE009 54.0 8 9 3200 3
2.5 220 Z/7343-18 T528Z227M2R5ATE006 55.0 10 67400 3
2.5 330 W/7343-15 T528W337M2R5ATE009 82.5 10 96000 3
2.5 330 Z/7343-18 T528Z337M2R5ATE005 82.5 10 58100 3
2.5 330 Z/7343-18 T528Z337M2R5ATE006 82.5 10 67400 3
2.5 330 Z/7343-18 T528Z337M2R5ATE007 82.5 10 76800 3
2.5 330 Z/7343-18 T528Z337M2R5ATE008 82.5 10 86400 3
2.5 330 Z/7343-18 T528Z337M2R5ATE009 82.5 10 96000 3
2.5 330 Z/7343-18 T528Z337M2R5ATE012 82.5 10 12 5200 3
2.5 470 Z/7343-18 T528Z477M2R5ATE005 117.5 10 58100 3
2.5 470 Z/7343-18 T528Z477M2R5ATE006 117.5 10 67400 3
2.5 470 Z/7343-18 T528Z477M2R5ATE008 117.5 10 86400 3
2.5 470 Z/7343-18 T528Z477M2R5ATE009 117.5 10 96000 3
2.5 470 Z/7343-18 T528Z477M2R5ATE012 117.5 10 12 5200 3
3100 I/3216-10 T528I107M003ATE150 30.0 10 150 800 3
3100 I/3216-10 T528I107M003ATE200 30.0 10 200 700 3
468 I/3216-10 T528I686M004ATE150 27. 2 10 150 800 3
468 I/3216-10 T528I686M004ATE200 27.2 10 200 700 3
4220 K/3528-10 T528K227M004ATE100 88.0 10 100 1200 3
4220 Z/7343-18 T528Z227M004ATE007 88.0 10 76800 3
4220 Z/7343-18 T528Z227M004ATE008 88.0 10 86400 3
4220 Z/7343-18 T528Z227M004ATE009 88.0 10 96000 3
4220 Z/7343-18 T528Z227M004ATE012 88.0 10 12 5200 3
4330 Z/7343-18 T528Z337M004ATE009 132.0 10 96000 3
4330 Z/7343-18 T528Z337M004ATE012 132.0 10 12 5200 3
6.3 47 I/3216-10 T528I476M006ATE150 29.6 10 150 800 3
6.3 47 I/3216-10 T528I476M006ATE200 29.6 10 200 700 3
6.3 150 K/3528-10 T528K157M006ATE200 94.5 10 200 900 3
6.3 150 K/3528-10 T528K157M006ATE100 94.5 10 100 1200 3
6.3 150 K/3528-10 T528K157M006ATE200 94.5 10 200 900 3
6.3 150 Z/7343-18 T528Z157M006ATE007 94.5 10 76800 3
6.3 150 Z/7343-18 T528Z157M006ATE008 94.5 10 86400 3
6.3 150 Z/7343-18 T528Z157M006ATE009 94.5 10 96000 3
6.3 150 Z/7343-18 T528Z157M006ATE012 94.5 10 12 5200 3
6.3 220 Z/7343-18 T528Z227M006ATE009 138.6 10 96000 3
6.3 220 Z/7343-18 T528Z227M006ATE012 138.6 10 12 5200 3
10 33 I/3216-10 T528I336M010ATE150 33.0 10 150 800 3
10 33 I/3216-10 T528I336M010ATE200 33.0 10 200 700 3
VDC µF KEMET/EIA (See below for
part options)
µA @ +20ºC
Maximum/
5 Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ +20ºC
100 kHz
Maximum
(mA) +45ºC 100 kHz Temp ≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Denotes black epoxy product
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 115
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
Derating Guidelines
Voltage Rating
Maximum
Recommended
Steady State
Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 105°C
2 V ≤ VR ≤ 10 V 90% of VRVR
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
+30°C Rise
I
3216-10
96
K
3528-10
162
B
3528-20
127
W
7343-15
325
Z
7343-17
325
D
7343-31
255
Y
7343-40
263
X
7443-43
270
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
Maximum
Transient
Voltage
Recommended
Application
Voltage
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
100%
-55 25 85 105
% Rated Voltage
Temperature (°C)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 116
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For Series Rated to 125°C
Table 2 – Land Dimensions/Courtyard
0.700 mm 0.000 mm
0.600 mm
1.600 mm
0.854 mm
2.100 mm
2.500 mm
2.665 mm
3.000 mm
1.446 mm
1.700 mm
0.000 mm
-1.350 mm
-2.100 mm
-2.500 mm
-2.600 mm
-3.000 mm
-3.050 mm
-0.462 mm
0.000 mm
-0.700 mm
-1.000 mm
-2.100 mm
-3.000 mm
-3.350 mm
-3.750 mm
3.050 mm
3.254 mm
3.600 mm
4.000 mm
-3.600 mm
-4.000 mm
-1.600 mm
-2.400 mm
1.200 mm
1.046 mm
0.400 mm
0.300 mm
0.000 mm
R 0.254 mm x2 places
2.700 mm
4.000 mm
4.850 mm
5.300 mm
5.700 mm
5.954 mm
6.500 mm
R 0.254 mm x2 places
Tinned Cu Plate
Masked Cu Plate
ø 0.400 mm x16 Places
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.81
1.12
5.22
3.50
2.13
1.43
1.28
4.36
3.24
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 117
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Tantalum
Carbon
Silver Paint
Washer
Tantalum
Wire
Weld
Leadframe
(+Anode)
Leadframe
(-Cathode)
Ta
2
O
5
Polymer
Epoxy
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 118
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2018_T528 8/5/2013 99
KEMET Organic Capacitor (KO-CAP) – T528 Low ESL/Facedown Terminal Polymer Tantalum
Capacitor Marking
(FDO)
Facedown
Organic
Polymer
Rated
Voltage
337
2R5 K
230
FD Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1
st
digit = Last number of Year
9 = 2009
0 = 2010
1 =2011
2 = 2012
3 = 2013
4 =2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
All KO-CAP series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 119
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 1
One world. One KEMET
Bene ts
Polymer cathode technology
Substrate Termination
EIA Case Size: 2012 (0805 MLCC Equivalent)
Low Profi le: 1.0 mm maximum
Non-ignition failure mode
Improved volumetric effi ciency
Self-healing mechanism
Capacitance: 22 uF to 150 uF
Use up to 90% of rated voltage (10% derating)
Voltage: 6.3 V and 10 V
RoHS Compliant and Halogen Free
105°C maximum temperature capability
Lead free 260°C refl ow capable
Applications
Typical applications include densely populated circuits where
space restrictions do not allow for larger and more commonly
available case sizes such as smart phones, digital cameras, MP3
players, GPS navigation systems, WiFi modules, analytical and
test equipment, and audio/sound circuits.
Overview
The KEMET Low ESR Polymer Series is a tantalum capacitor
with a Ta anode and Ta2O5 dielectric. A conductive organic
polymer replaces the traditionally used MnO2 as the cathode
plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-
CAP also exhibits a benign failure mode which eliminates the
ignition failures that can occur in standard MnO2 tantalum types.
KO-CAPs may also be operated at voltages up to 90% of rated
voltage for part types with rated voltages of ≤ 10 volts and up
to 80% of rated voltage for part types > 10 volts with equivalent
or better reliability than traditional MnO2 tantalum capacitors
operated at 50% of rated voltage.
The T529 Series KO-CAP uses a substrate termination design,
which results in the most volumetrically effi cient packaging
technology available today in Polymer Tantalum Chip Capacitors.
This series offers high capacitance values in a small 2012-10
(2.0 mm (L) x 1.2 mm (W) x 1.0 mm (H)) package size. The T529
Series is ideal for use in densely populated circuits such as smart
phones and digital cameras where space restrictions do not allow
for larger and more commonly available case sizes.
KEMET Organic Capacitor (KO-CAP)
T529 Series Small Case Size Substrate Terminal
Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC. Halogen free.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 120
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Ordering Information
T529 P476 M 006 A A E200
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
529 =
Substrate
Terminal
Polymer
P = 2012-10
I = 3216-10
First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
e.g., 476 = 47 µF
M = ±20% 006 = 6.3 V
010 = 10 V
A = N/A A = Ni - Au E = ESR
Last three digits
specify ESR in
mΩ (200 = 200
mΩ)
Blank = 7"
Reel
Performance Characteristics
Item
Speci cations
Operating Temperature -55°C to 105°C
Rated Capacitance Range 22 µF to 150 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 6.3 V and 10 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current Refer to Part Number Electrical Specifi cation Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 121
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Quali cation
Test Condition/Characteristics
Endurance 85°C @ rated voltage, 1,000 hours
Δ C/C Within initial Δ C/C limits
DF Within 1.5 x initial limits
DCL Within 3.0 x initial limits
Damp Heat Steady State 40°C, 90 to 95% RH, 500 hours
Δ C/C -20% to +30% of initial Δ C/C limit
DF Within 1.5 x initial limits
DCL Within 3.0 x initial limits
Temperature Stability Extreme temperature exposure at
-55°C and +105°C
+2C -55°C +105°C
Δ C/C I L* -20% to 0% of Δ C/C -50% - 0% of Δ C/C
DF IL IL IL
DCL IL IL 1.25 CV
Surge Voltage 1.3 Vr, 85°C, 1,000 Ω resistor, 1,000 cycles
Δ C/C Within initial Δ C/C limits
DF Within initial limit
DCL Within initial limit
Mechanical Shock 100 G, Saw-Tooth wave
Δ C/C
Within initial Δ C/C limits
DF Within initial limit
DCL Within initial limit
Vibration
Frequency: 10 to 2 kHz, Sweep: 1 minute,
Amplitude of vibration: 1.5 mm, Vibration Time:
Each plane shall be 2 hours for a total of 4 hours.
Δ C/C Within initial Δ C/C limits
DF Within initial limit
DCL Within initial limit
Terminal strength
Strength: 4.9 N, Time: 10 ±0.5 seconds
(two directions)
Visual No evidence of mechanical damage
*IL = Initial limit
Dimensions – Millimeters
Case Size Component
KEMET EIA L W H F S
P2012–10 2.0 ±0.1 1.25 ±0.1 1.0 maximum 0.9 ±0.1 0.55 ±0.1
I3216–10 3.2 ±0.2 1.6 ±0.2 1.0 maximum 1.2 ±0.1 0.8 ±0.1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 122
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp.
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +25ºC
Maximum/
5 Minutes
% @ +25ºC
120 Hz
Maximum
mΩ @ +25ºC
100 kHz
Maximum
(mA) +45ºC 100 kHz
Temp 260ºC
°C
6.3 22 P/2012-10 T529P226M006AAE200 22.0 6200 548 3105
6.3 47 P/2012-10 T529P476M006AAE200 29.6 6200 510 3105
6.3 47 P/2012-10 T529P476M006AAE150 29.6 6150 590 3105
6.3 150 I/3216-10 T529I157M006AAE200 283.5 10 200 548 3105
6.3 150 I/3216-10 T529I157M006AAE100 283.5 10 100 775 3105
6.3 150 I/3216-10 T529I157M006AAE070 283.5 10 70 926 3105
10 22 P/2012-10 T529P226M010AAE200 33.0 6200 354 3105
10 47 P/2012-10 T529P476M010AAE200 141.0 6200 510 3105
Refer to Ordering Information for additional detail.
Under development
Derating Guidelines
Voltage Rating
-55°C to 85°C
85°C to 105°C
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
10 V
90% of VR
VR
See Chart
VR
VR = Rated Voltage
50%
60%
70%
80%
90%
100%
110%
-55 25 85 105
Maximum Transient Voltage
Recommended Application
Voltage 80%
Roll Over for
Order Info.
T529 P476 M 006 A A E200
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
529 =
Substrate
Terminal
Polymer
P = 2012-10
I = 3216-10
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
e.g., 476 = 47 µF
M = ±20%
006 = 6.3 V
010 = 10 V
A = N/A
A = Ni - Au
E = ESR
Last three digits
specify ESR in
mΩ (200 = 200
mΩ)
Blank = 7"
Reel
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp.
VDC µF KEMET/EIA (See below for
part options)
µA @ +25ºC
Maximum/
5 Minutes
% @ +25ºC
120 Hz
Maximum
mΩ @ +25ºC
100 kHz
Maximum
(mA) +45ºC 100 kHz Temp ≤ 260ºC°C
6.3 22 P/2012-10 T529P226M006AAE200 22.0 6200 548 3105
6.3 47 P/2012-10 T529P476M006AAE200 29.6 6200 510 3105
6.3 47 P/2012-10 T529P476M006AAE150 29.6 6150 590 3105
6.3 150 I/3216-10 T529I157M006AAE200 283.5 10 200 548 3105
6.3 150 I/3216-10 T529I157M006AAE100 283.5 10 100 775 3105
6.3 150 I/3216-10 T529I157M006AAE070 283.5 10 70 926 3105
10 22 P/2012-10 T529P226M010AAE200 33.0 6200 354 3105
10 47 P/2012-10 T529P476M010AAE200 141.0 6200 510 3105
Refer to Ordering Information for additional detail.
Under development
Derating Guidelines
Voltage Rating
-55°C to 85°C 85°C to 105°C
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
≤ 10 V 90% of VRVRSee Chart VR
VR = Rated Voltage
50%
60%
70%
80%
90%
100%
110%
-55 25 85 105
Maximum Transient Voltage
Recommended Application
Voltage
80%
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 123
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the
device. Permissible AC ripple voltage which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specifi ed for reverse
voltage. See the Reverse Voltage section for allowable limits.
The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45°C < T ≤ 85°C
85°C < T ≤ 105°C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
+30°C Rise
I
3216
60
P
2012
25
The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier
table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 124
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For Series Rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric Size
Code Dimensions in mm
Case
EIA
G Maximum
Z Minimum
X Minimum
Y ref
I3216–10 1.65 3.25 1.10 0.80
P2012–10 1.05 2.05 0.80 0.50
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 125
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 126
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2070_T529 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Capacitor Marking
Polarity
Indicator (+)
Voltage and
Capacitance Code
Date
Code*
E Js
Date Code *
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
2013 A B CDEF G H J KLM
2014 N P QR S TU V W X Y Z
2015 abcdef g h jklm
2016 npqr s t u v w x y z
Code J A
Rated Voltage
6 V
10 V
Code j s a
Capacitance 22 47 100
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 3C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 127
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 1
One world. One KEMET
B e n e t s
ESR: 4 mΩ to 40 mΩ
125°C maximum operating temperature
Polymer cathode technology
High frequency capacitance retention
Non-ignition failure mode
Capacitance: 150 µF to 1,500 µF
100% accelerated steady state aging
100% surge current tested
Utilizes multiple tantalum anode technology
Volumetric effi ciency
Use up to 90% of rated voltage (10% derating) for part types ≤ 10 V
Use up to 80% of rated voltage (20% derating) for part types > 10 V
Self-healing mechanism
EIA standard case sizes
Applications
Typical applications include high speed server, microprocessor
decoupling and high ripple current applications.
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum
capacitor with a Ta anode and Ta2O5 dielectric. A conductive
organic polymer replaces the traditionally used MnO2 as the
cathode plate of the capacitor. This results in very low ESR and
improved capacitance retention at high frequency. The KO-
CAP also exhibits a benign failure mode which eliminates the
ignition failures that can occur in standard MnO2 tantalum types.
KO-CAPs may also be operated at steady state voltages up to
90% of rated voltage for part types with rated voltages of ≤10
volts and up to 80% of rated voltage for part types >10 volts with
equivalent or better reliability than traditional MnO2 tantalum
capacitors operated at 50% of rated voltage.
The T530 Series KO-CAP offers the same advantages as
the T520 Series but also has the added advantages of higher
capacitance, 125°C performance capability, higher ripple current
handling capability and a lower ESR range. Packaged as multiple
anodes to reduce the depth that the signal must penetrate, this
parallel arrangement reduces the ESR further still to achieve the
highest capacitance and lowest ESR of any other type of surface
mount capacitor with typical ESR values as low as 4 mΩ. With
reduced ESR, the enhanced capacitance retention at higher
frequencies provides the lowest total capacitance and most
economical solution for high power applications.
KEMET Organic Capacitor (KO-CAP)
T530 High Capacitance/125°C Rated Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 128
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T530 X337 M010 A T E005
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
530 = High
Capacitance
125°C Rated
Polymer
D, X, Y First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
M = ±20% 2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
G = Gold Plated
E = ESR Last
three digits
specify ESR
in mΩ (005 =
5 mΩ )
Blank = 7"
Reel
7280 = 13"
Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 150 – 1,500 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 2.5 – 16 V
DF (120 Hz) 8%
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 129
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
Quali cation
Test Condition Characteristics
Endurance 105°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Δ C/C Within -20%/+10% of initial value
DF ≤ initial limit
DCL 2 x initial limit @ 125ºC
ESR 2 x initial limit
Storage Life 125°C @ 0 volts, 2,000 hours
Δ C/C
Within -20%/+10% of initial value
DF Within initial limits
DCL Within 2.0 x initial limit
ESR Within 2.0 x initial limit
Humidity 60°C, 90% RH, 1,000 hours, No Load
Δ C/C Within -5%/+35% of initial value
DF ≤ initial limit
DCL Within 3.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +105ºC, +25ºC
+2C
-55°C
+85°C
+125°C
Δ C/C IL* ±20% ±20% ±30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105°C, 1.32 x rated voltage, 33Ω Resistance, 1,000 cycles
Δ C/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
Certi cation
DSCC Drawing 04052
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 130
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
Electrical Characteristics
1
10
100
1,000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (μF)
Frequency (Hz)
T530D227M006ATE006
T530Y337M006ATE005
T530X477M006ATE004
Capacitance vs. Frequency
ESR vs. Frequency
0.001
0.01
0.1
1
10
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T530D227M006ATE006_Imp
T530Y337M006ATE005_Imp
T530X477M006ATE004_Imp
T530D227M006ATE006_ESR
T530Y337M006ATE005_ESR
T530X477M006ATE004_ESR
Dimensions – Millimeters (Inches)
Metric will govern
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
D734331
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.3 ±0.3
(0.157 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Y734340
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 (0.157) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 131
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
T530 X337 M010 A T E005
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
530 = High
Capacitance
125°C Rated
Polymer
D, X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
G = Gold Plated
E = ESR Last
three digits
specify ESR
in mΩ (005 =
5 mΩ )
Blank = 7"
Reel
7280 = 13"
Reel
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20°C
Maximum/
5 Minutes
% @ +20°C
120 Hz
Maximum
mΩ @ +20°C
100 kHz
Maximum
(mA) +45°C 100 kHz
Temperature
260ºC
C)
2.5 470 D/7343-31 T530D477M2R5A(1)E005 118 8 5 7100 3125
2.5 470 D/7343-31 T530D477M2R5A(1)E006 118 8 6 6500 3125
2.5 470 D/7343-31 T530D477M2R5A(1)E010 118 810 5000 3125
2.5 560 D/7343-31 T530D567M2R5A(1)E005 140 8 5 7100 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E005 170 8 5 7300 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E006 170 8 6 6600 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E007 170 876100 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E006 170 8 6 6500 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E010 170 810 5000 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E007 170 876000 3125
2.5 680 X/7343-43 T530X687M2R5A(1)E006 170 8 6 6700 3125
2.5 1000 Y/7343-40 T530Y108M2R5A(1)E005 250 8 5 7300 3125
2.5 1000 Y/7343-40 T530Y108M2R5A(1)E006 250 8 6 6600 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E004 250 8 4 8200 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E005 250 8 5 7300 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E006 250 8 6 6700 3125
2.5 1500 X/7343-43 T530X158M2R5A(1)E005 375 8 5 7300 3125
3470 D/7343-31 T530D477M003A(1)E010 141 810 5000 3125
3680 D/7343-31 T530D687M003A(1)E010 204 810 5000 3125
31000 X/7343-43 T530X108M003A(1)E010 300 810 5200 3125
31500 X/7343-43 T530X158M003A(1)E008 450 8 8 5800 3125
4330 D/7343-31 T530D337M004A(1)E005 132 8 5 7100 3125
4330 D/7343-31 T530D337M004A(1)E006 132 8 6 6500 3125
4470 D/7343-31 T530D477M004A(1)E006 188 8 6 6500 3125
4470 D/7343-31 T530D477M004A(1)E010 188 810 5000 3125
4470 Y/7343-40 T530Y477M004A(1)E005 188 8 5 7300 3125
4470 Y/7343-40 T530Y477M004A(1)E006 188 8 6 6600 3125
4680 Y/7343-40 T530Y687M004A(1)E005 272 8 5 7300 3125
4680 X/7343-43 T530X687M004A(1)E004 272 8 4 8200 3125
4680 X/7343-43 T530X687M004A(1)E005 272 8 5 7300 3125
4680 X/7343-43 T530X687M004A(1)E006 272 8 6 6700 3125
4680 X/7343-43 T530X687M004A(1)E010 272 810 5200 3125
41000 X/7343-43 T530X108M004A(1)E006 400 8 6 6700 3125
6.3 220 D/7343-31 T530D227M006A(1)E005 139 8 5 7100 3125
6.3 220 D/7343-31 T530D227M006A(1)E006 139 8 6 6500 3125
6.3 330 D/7343-31 T530D337M006A(1)E006 208 8 6 6500 3125
6.3 330 D/7343-31 T530D337M006A(1)E010 208 810 5000 3125
6.3 330 Y/7343-40 T530Y337M006A(1)E005 208 8 5 7300 3125
6.3 330 Y/7343-40 T530Y337M006A(1)E006 208 8 6 6600 3125
6.3 330 Y/7343-40 T530Y337M006A(1)E010 208 810 5100 3125
6.3 470 Y/7343-40 T530Y477M006A(1)E005 296 8 5 7300 3125
6.3 470 X/7343-43 T530X477M006A(1)E004 296 8 4 8200 3125
6.3 470 X/7343-43 T530X477M006A(1)E005 296 8 5 7300 3125
6.3 470 X/7343-43 T530X477M006A(1)E006 296 8 6 6700 3125
6.3 470 X/7343-43 T530X477M006A(1)E010 296 810 5200 3125
6.3 680 X/7343-43 T530X687M006A(1)E010 428 8 10 5200 3125
6.3 680 X/7343-43 T530X687M006A(1)E018 428 8 18 3900 3125
10 150 D/7343-31 T530D157M010A(1)E005 150 8 5 7100 3125
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20°C
Maximum/
5 Minutes
% @ +20°C
120 Hz
Maximum
mΩ @ +20°C
100 kHz
Maximum
(mA) +45°C 100 kHz
Temperature
260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
DF
ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference
Other part number options:
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ +20°C
Maximum/
5 Minutes
% @ +20°C
120 Hz
Maximum
mΩ @ +2C
100 kHz
Maximum
(mA) +45°C 100 kHz Temperature
≤ 260ºCC)
2.5 470 D/7343-31 T530D477M2R5A(1)E005 118 8 5 7100 3125
2.5 470 D/7343-31 T530D477M2R5A(1)E006 118 8 6 6500 3125
2.5 470 D/7343-31 T530D477M2R5A(1)E010 118 810 5000 3125
2.5 560 D/7343-31 T530D567M2R5A(1)E005 140 8 5 7100 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E005 170 8 5 7300 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E006 170 8 6 6600 3125
2.5 680 Y/7343-40 T530Y687M2R5A(1)E007 170 876100 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E006 170 8 6 6500 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E010 170 810 5000 3125
2.5 680 D/7343-31 T530D687M2R5A(1)E007 170 876000 3125
2.5 680 X/7343-43 T530X687M2R5A(1)E006 170 8 6 6700 3125
2.5 1000 Y/7343-40 T530Y108M2R5A(1)E005 250 8 5 7300 3125
2.5 1000 Y/7343-40 T530Y108M2R5A(1)E006 250 8 6 6600 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E004 250 8 4 8200 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E005 250 8 5 7300 3125
2.5 1000 X/7343-43 T530X108M2R5A(1)E006 250 8 6 6700 3125
2.5 1500 X/7343-43 T530X158M2R5A(1)E005 375 8 5 7300 3125
3470 D/7343-31 T530D477M003A(1)E010 141 810 5000 3125
3680 D/7343-31 T530D687M003A(1)E010 204 810 5000 3125
31000 X/7343-43 T530X108M003A(1)E010 300 810 5200 3125
31500 X/7343-43 T530X158M003A(1)E008 450 8 8 5800 3125
4330 D/7343-31 T530D337M004A(1)E005 132 8 5 7100 3125
4330 D/7343-31 T530D337M004A(1)E006 132 8 6 6500 3125
4470 D/7343-31 T530D477M004A(1)E006 188 8 6 6500 3125
4470 D/7343-31 T530D477M004A(1)E010 188 810 5000 3125
4470 Y/7343-40 T530Y477M004A(1)E005 188 8 5 7300 3125
4470 Y/7343-40 T530Y477M004A(1)E006 188 8 6 6600 3125
4680 Y/7343-40 T530Y687M004A(1)E005 272 8 5 7300 3125
4680 X/7343-43 T530X687M004A(1)E004 272 8 4 8200 3125
4680 X/7343-43 T530X687M004A(1)E005 272 8 5 7300 3125
4680 X/7343-43 T530X687M004A(1)E006 272 8 6 6700 3125
4680 X/7343-43 T530X687M004A(1)E010 272 810 5200 3125
41000 X/7343-43 T530X108M004A(1)E006 400 8 6 6700 3125
6.3 220 D/7343-31 T530D227M006A(1)E005 139 8 5 7100 3125
6.3 220 D/7343-31 T530D227M006A(1)E006 139 8 6 6500 3125
6.3 330 D/7343-31 T530D337M006A(1)E006 208 8 6 6500 3125
6.3 330 D/7343-31 T530D337M006A(1)E010 208 810 5000 3125
6.3 330 Y/7343-40 T530Y337M006A(1)E005 208 8 5 7300 3125
6.3 330 Y/7343-40 T530Y337M006A(1)E006 208 8 6 6600 3125
6.3 330 Y/7343-40 T530Y337M006A(1)E010 208 810 5100 3125
6.3 470 Y/7343-40 T530Y477M006A(1)E005 296 8 5 7300 3125
6.3 470 X/7343-43 T530X477M006A(1)E004 296 8 4 8200 3125
6.3 470 X/7343-43 T530X477M006A(1)E005 296 8 5 7300 3125
6.3 470 X/7343-43 T530X477M006A(1)E006 296 8 6 6700 3125
6.3 470 X/7343-43 T530X477M006A(1)E010 296 810 5200 3125
6.3 680 X/7343-43 T530X687M006A(1)E010 428 8 10 5200 3125
6.3 680 X/7343-43 T530X687M006A(1)E018 428 8 18 3900 3125
10 150 D/7343-31 T530D157M010A(1)E005 150 8 5 7100 3125
VDC µF KEMET/EIA (See below for
part options)
µA @ +20°C
Maximum/
5 Minutes
% @ +20°C
120 Hz
Maximum
mΩ @ +2C
100 kHz
Maximum
(mA) +45°C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR
Maximum
Allowable Ripple
Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference
Other part number options:
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 132
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ +20°C
Maximum/
5 Minutes
% @ +20°C
120 Hz
Maximum
mΩ @ +2C
100 kHz
Maximum
(mA) +45°C 100 kHz Temperature
≤ 260ºCC)
10 150 D/7343-31 T530D157M010A(1)E006 150 8 6 6500 3125
10 150 D/7343-31 T530D157M010A(1)E010 150 810 5000 3125
10 220 D/7343-31 T530D227M010A(1)E006 220 8 6 6500 3125
10 220 D/7343-31 T530D227M010A(1)E010 220 810 5000 3125
10 220 Y/7343-40 T530Y227M010A(1)E006 220 8 6 6600 3125
10 330 X/7343-43 T530X337M010A(1)E004 330 8 4 8200 3125
10 330 X/7343-43 T530X337M010A(1)E005 330 8 5 7300 3125
10 330 X/7343-43 T530X337M010A(1)E006 330 8 6 6700 3125
10 330 X/7343-43 T530X337M010A(1)E010 330 810 5200 3125
16 150 X/7343-43 T530X157M016A(1)E015 240 815 4200 3 125
16 150 X/7343-43 T530X157M016A(1)E025 240 825 3300 3125
16 150 X/7343-43 T530X157M016A(1)E040 240 840 2600 3125
VDC µF KEMET/EIA (See below for
part options)
µA @ +20°C
Maximum/
5 Minutes
% @ +20°C
120 Hz
Maximum
mΩ @ +2C
100 kHz
Maximum
(mA) +45°C 100 kHz Temperature
≤ 260ºCC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR
Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
(1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
T530 X337 M010 A T E005
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
T =
Tantalum
530 = High
Capacitance
125°C Rated
Polymer
D, X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A
T = 100% Matte
Tin (Sn) Plated
H = Tin/Lead
(SnPb) Solder
Coated (5% Pb
minimum)
G = Gold Plated
E = ESR Last
three digits
specify ESR
in mΩ (005 =
5 mΩ )
Blank = 7"
Reel
7280 = 13"
Reel
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 133
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
100%
-55 25 45 85 105 125
% Rated Voltage
Temperature (ºC)
Maximum Transient Voltage
Recommended Application Voltage V
R
10 V
Recommended Application Voltage V
R
> 10 V
67%
60%
54%
Derating Guidelines
Voltage
Rating
Maximum
Recommended Steady
State Voltage
Maximum Recommended
Transient Voltage (1 ms – 1 µs)
-55°C to 105°C
2.5 V ≤ VR ≤ 10 V
90% of VR
VR
VR = 16V
80% of VR
VR
105°C to 125°C
2.5 V ≤ VR ≤ 10 V
60% of VR
67% of VR
VR = 16 V
54% of VR
67% of VR
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C with
+30°C Rise
W
7343-15
325
Z
7343-17
325
D
7343-31
255
Y
7343-40
263
X
7443-43
270
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 134
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R
2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 135
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 99
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Polymer /Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 136
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2019_T530 8/5/2013 1010
KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum
Capacitor Marking
(KO)
KEMET
Multi -
Anode
Polymer
Rated
Voltage
158
3 K
230
KM Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 =2011
2 = 2012
3 = 2013
4 =2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
All KO-CAP series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 137
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1
One world. One KEMET
B e n e t s
Extremely low ESR
-55°C to 105°C operating temperature range
Polymer cathode technology
High frequency capacitance retention
Non-ignition failure mode
Capacitance up to 1,500 µF
Enhanced derating
100% accelerated steady state aging
100% surge current tested
Taped and reeled per EIA 481–1
Volumetric effi ciency and self-healing mechanism
Termination options (SnPb and 100% Sn)
Surge options at 2C and -55ºC/85ºC
EIA standard case sizes
Applications
Typical applications include DC/DC converters, switch mode
and point of load power supply, radar pulse capacitor and
telecommunications (mobile phone and base station). Other
general applications include decoupling and fi ltering in
applications requiring low ESR or a benign failure mode.
Overview
The KEMET Organic Capacitor is a tantalum capacitor with a
Ta anode and Ta2O5 dielectric. A conductive organic polymer
replaces the traditionally used MnO2 as the cathode plate of the
capacitor. This results in very low ESR, improved capacitance
retention at high frequency and improved ripple current handling
capability. The polymer technology also exhibits a benign failure
mode which eliminates the ignition failures. Tantalum polymers
may also be operated at voltages up to 90% of rated voltage
for part types with rated voltages of ≤ 10 volts and up to 80% of
rated voltage for part types > 10 volts with equivalent or better
reliability than traditional MnO2 tantalum capacitors operated at
50% of rated voltage.
The T543 Series Polymer Tantalum COTS is an upscreened
version of KEMET's commercial polymer product offering and
captures the best features of multilayer ceramic capacitors (low
ESR, high frequency capacitance retention), aluminum electrolytic
capacitors (higher capacitance, benign failure mode), and proven
solid tantalum technology (volumetric effi ciency, surface mount
capability, extremely long life). The T543 also offers an option
for surge current testing (10 cycles at +25ºC and 10 cycles at
-55ºC/+85ºC) and termination fi nish (SnPb and 100% Sn).
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 138
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 22
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T543 D156 K035 A H E 100
Capacitor
Class Series Case Size Capacitance Code
(pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material Surge ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 =63 V
A = N/A H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
25°C
W = 10 cycles
-55°C and
85°C
ESR in
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 105°C
Rated Capacitance Range 5.6 – 1,500 μF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 2.5 – 63 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 139
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 33
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Quali cation
Test Condition Characteristics
Endurance 105°C @ rated voltage, 2,000 hours
Δ C/C Within -20/+10 of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Storage Life 105°C @ 0 volts, 2,000 hours
Δ C/C
Within -20/+10 of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Humidity 60°C, 90% RH, 500 hours
Δ C/C Within -5%/+35% of initial value
DF Within initial limits
DCL Within 5.0 x initial limit
ESR Within 2.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +105ºC, +25º C
+2C -55°C +85°C +105°C
Δ C/C I L* +/-20% +/-20% +/-30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105°C, 1.32 x rated voltage, 1,000 cycles
Δ C/C Within -20/+10 of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000
Hz, 20 G peak
Δ C/C
Within ±10 of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 140
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 44
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Electrical Characteristics
ESR vs. Frequency
Capacitance vs. Frequency
0.001
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T5430B157M006ATE035_Imp
T543C227M006ATE025_Imp
T543V337M006ATE015_Imp
T543D337M006ATE009_Imp
T543B157M006ATE035_ESR
T543C227M006ATE025_ESR
T543V337M006ATE015_ESR
T543D337M006ATE009_ESR
1
10
100
1,000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T543B157M006ATE035
T543C227M006ATE025
T543V337M006ATE015
T543D337M006ATE009
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 141
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 55
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Dimensions – Millimeters
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(0.004)
S* ±0.3
±(0.012)
B* ±0.15
(Ref) ±0.006
X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216–18
3.2 ±0.2
(0.126 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.6 ±0.2
(0.063 ±0.008)
1.2 (0.047) 0.8 (0.031) 0.4 (0.016)
0.10 ±0.10
(0.004 ±0.004)
0.4 (.016) 0.4 (0.016) 0.13 (0.005) 0.8 (.31) 1.1 (0.043) 1.3 (0.051)
B352821
3.5 ±02
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.9 ±0.2
(0.075 ±0.008)
2.2 (0.087) 0.8 (0.031) 0.4 (0.016)
0.10 ±0.10
(0.004 ±0.004)
0.5 (.020) 1.0 (0.039) 0.13 (0.005) 1.1 (0.043) 1.8 (0.071) 2.2 (0.087)
C6032–28
6.0 ±0.3
(0.236 ±0.03)
3.2 ±0.3
(0.126 ±0.012)
2.5 ±0.3
(0.098 ±0.012)
2.2 (0.087) 1.3 (0.051) 0.5 (0.020)
0.10 ±0.10
(0.004 ±0.004)
0.9 (.035) 1.0 (0.039) 0.13 (0.005) 2.5(.098) 2.8 (0.110) 2.4 (0.094)
D734331
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4 (0.094) 1.3 (0.051) 0.5 (0.020)
0.10 ±0.10
(0.004 ±0.004)
0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (.150) 3.5 (0.138) 3.5 (0.138)
H7360–20
7.3 ±0.3
(0.287 ±0.012)
6.0±0.3
(0.236 ±0.012)
2.0 (0.078)
Maximum
4.1 (0.161) 1.3 (0.051) n/a
0.10 ±0.10
(0.004 ±0.004)
n/a n/a 0.13 (0.005) 3.3 (.130) 3.5 (0.138) 3.5 (0.138)
L6032–19
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.2
(0.110 ±0.008)
1.9 (0.075) 2.2 (0.087) 1.3 (0.051) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 2.5(.098) 2.8 (0.110) 2.4 (0.094)
M3528–15
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.5 (0.059) 2.2 (0.087) 0.8 (0.031) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 1.1 (.043) 1.8 (0.071) 2.2 (0.087)
T3528–12
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
1.2 (0.047) 2.2 (0.087) 0.8 (0.031) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 1.1 (.043) 1.8 (0.071) 2.2 (0.087)
U6032–15
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.2
(0.110 ±0.008)
1.5 (0.059) 2.2 (0.087) 1.3 (0.051) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 2.5(.098) 2.8 (0.110) 2.4 (0.094)
V7343–20
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.0 (0.079) 2.4 (0.094) 1.3 (0.051) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
W7343–15
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.5 (0.059) 2.4 (0.094) 1.3 (0.051) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
X7343–43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (0.094) 1.3 (0.051) 0.5 (0.020)
0.10 ±0.10
(0.004 ±0.004)
1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
Y734340
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 (0.157) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020)
0.10 ±0.10
(0.004 ±0.004)
1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 142
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 66
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
2.5 47 A/3216-18 T543A476(1)2R5A(2)(3)(4) 12 890 1116 105 3
2.5 56 T/3528-12 T543T566(1)2R5A(2)(3)(4) 14 840 1620 105 3
2.5 56 T/3528-12 T543T566(1)2R5A(2)(3)(4) 14 870 1225 105 3
2.5 68 A/3216-18 T543A686(1)2R5A(2)(3)(4) 17 870 1265 105 3
2.5 68 A/3216-18 T543A686(1)2R5A(2)(3)(4) 17 880 1183 105 3
2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)(4) 25 840 1620 105 3
2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)(4) 25 870 1225 105 3
2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)(4) 25 880 1146 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 825 2254 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 835 1905 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 840 1782 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 870 1347 105 3
2.5 150 U/6032-15 T543U157(1)2R5A(2)(3)(4) 38 855 1567 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 825 2254 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 830 2058 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 835 1905 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 855 1520 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 870 1347 105 3
2.5 220 U/6032-15 T543U227(1)2R5A(2)(3)(4) 55 855 1567 105 3
2.5 220 C/6032-28 T543C227(1)2R5A(2)(3)(4) 55 825 2569 105 3
2.5 220 C/6032-28 T543C227(1)2R5A(2)(3)(4) 55 845 1915 105 3
2.5 220 W/7343-15 T543W227(1)2R5A(2)(3)(4) 55 10 25 2683 105 3
2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)(4) 55 10 15 3531 105 3
2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)(4) 55 10 25 2735 105 3
2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)(4) 55 10 45 2039 105 3
2.5 220 D/7343-31 T543D227(1)2R5A(2)(3)(4) 55 10 40 2372 105 3
2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)(4) 83 835 1905 105 3
2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)(4) 83 845 1680 105 3
2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)(4) 83 870 1347 105 3
2.5 330 L/6032-19 T543L337(1)2R5A(2)(3)(4) 83 812 3536 105 3
2.5 330 L/6032-19 T543L337(1)2R5A(2)(3)(4) 83 825 2449 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 815 3317 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 818 3028 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 825 2569 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 845 1915 105 3
2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)(4) 83 10 15 3464 105 3
2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)(4) 83 10 25 2683 105 3
2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)(4) 83 10 40 2121 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 15 3531 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 18 3223 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 25 2735 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 40 2162 105 3
2.5 330 D/7343-31 T543D337(1)2R5A(2)(3)(4) 83 10 66124 105 3
2.5 330 D/7343-31 T543D337(1)2R5A(2)(3)(4) 83 10 75669 105 3
2.5 330 D/7343-31 T543D337(1)2R5A(2)(3)(4) 83 10 25 3000 105 3
2.5 470 C/6032-28 T543C477(1)2R5A(2)(3)(4) 118 825 2569 105 3
2.5 470 C/6032-28 T543C477(1)2R5A(2)(3)(4) 118 845 1915 105 3
2.5 470 V/7343-20 T543V477(1)2R5A(2)(3)(4) 118 10 18 3223 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 56708 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 66124 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 75669 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
2.5 47 A/3216-18 T543A476(1)2R5A(2)(3)(4) 12 890 1116 105 3
2.5 56 T/3528-12 T543T566(1)2R5A(2)(3)(4) 14 840 1620 105 3
2.5 56 T/3528-12 T543T566(1)2R5A(2)(3)(4) 14 870 1225 105 3
2.5 68 A/3216-18 T543A686(1)2R5A(2)(3)(4) 17 870 1265 105 3
2.5 68 A/3216-18 T543A686(1)2R5A(2)(3)(4) 17 880 1183 105 3
2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)(4) 25 840 1620 105 3
2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)(4) 25 870 1225 105 3
2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)(4) 25 880 1146 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 825 2254 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 835 1905 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 840 1782 105 3
2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)(4) 25 870 1347 105 3
2.5 150 U/6032-15 T543U157(1)2R5A(2)(3)(4) 38 855 1567 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 825 2254 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 830 2058 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 835 1905 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 855 1520 105 3
2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)(4) 55 870 1347 105 3
2.5 220 U/6032-15 T543U227(1)2R5A(2)(3)(4) 55 855 1567 105 3
2.5 220 C/6032-28 T543C227(1)2R5A(2)(3)(4) 55 825 2569 105 3
2.5 220 C/6032-28 T543C227(1)2R5A(2)(3)(4) 55 845 1915 105 3
2.5 220 W/7343-15 T543W227(1)2R5A(2)(3)(4) 55 10 25 2683 105 3
2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)(4) 55 10 15 3531 105 3
2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)(4) 55 10 25 2735 105 3
2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)(4) 55 10 45 2039 105 3
2.5 220 D/7343-31 T543D227(1)2R5A(2)(3)(4) 55 10 40 2372 105 3
2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)(4) 83 835 1905 105 3
2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)(4) 83 845 1680 105 3
2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)(4) 83 870 1347 105 3
2.5 330 L/6032-19 T543L337(1)2R5A(2)(3)(4) 83 812 3536 105 3
2.5 330 L/6032-19 T543L337(1)2R5A(2)(3)(4) 83 825 2449 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 815 3317 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 818 3028 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 825 2569 105 3
2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)(4) 83 845 1915 105 3
2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)(4) 83 10 15 3464 105 3
2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)(4) 83 10 25 2683 105 3
2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)(4) 83 10 40 2121 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 15 3531 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 18 3223 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 25 2735 105 3
2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)(4) 83 10 40 2162 105 3
2.5 330 D/7343-31 T543D337(1)2R5A(2)(3)(4) 83 10 66124 105 3
2.5 330 D/7343-31 T543D337(1)2R5A(2)(3)(4) 83 10 75669 105 3
2.5 330 D/7343-31 T543D337(1)2R5A(2)(3)(4) 83 10 25 3000 105 3
2.5 470 C/6032-28 T543C477(1)2R5A(2)(3)(4) 118 825 2569 105 3
2.5 470 C/6032-28 T543C477(1)2R5A(2)(3)(4) 118 845 1915 105 3
2.5 470 V/7343-20 T543V477(1)2R5A(2)(3)(4) 118 10 18 3223 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 56708 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 66124 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 75669 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 143
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 77
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 95000 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 10 4743 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 25 3000 105 3
2.5 560 D/7343-31 T543D567(1)2R5A(2)(3)(4) 140 10 56708 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 66124 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 10 4743 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 15 3873 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 40 2372 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 56943 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 66338 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 10 4909 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 15 4008 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 25 3105 105 3
2.5 680 X/7343-43 T543X687(1)2R5A(2)(3)(4) 170 10 66416 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 56943 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 66338 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 10 4909 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 15 4008 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 25 3105 105 3
2.5 1000 X/7343-43 T543X108(1)2R5A(2)(3)(4) 250 10 57029 105 3
2.5 1000 X/7343-43 T543X108(1)2R5A(2)(3)(4) 250 10 66416 105 3
2.5 1000 X/7343-43 T543X108(1)2R5A(2)(3)(4) 250 10 10 4970 105 3
2.5 1500 X/7343-43 T543X158(1)2R5A(2)(3)(4) 375 10 57029 105 3
2.5 1500 X/7343-43 T543X158(1)2R5A(2)(3)(4) 375 10 10 4970 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 835 1905 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 840 1782 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 870 1347 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 880 1260 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 835 1905 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 840 1782 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 870 1347 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 880 1260 105 3
3330 V/7343-20 T543V337(1)003A(2)(3)(4) 99 10 15 3531 105 3
3330 V/7343-20 T543V337(1)003A(2)(3)(4) 99 10 25 2735 105 3
3330 D/7343-31 T543D337(1)003A(2)(3)(4) 99 10 25 3000 105 3
3470 D/7343-31 T543D477(1)003A(2)(3)(4) 141 10 10 4743 105 3
3470 D/7343-31 T543D477(1)003A(2)(3)(4) 141 10 25 3000 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 10 4743 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 15 3873 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 25 3000 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 40 2372 105 3
31000 X/7343-43 T543X108(1)003A(2)(3)(4) 300 10 10 4970 105 3
31000 X/7343-43 T543X108(1)003A(2)(3)(4) 300 10 15 4058 105 3
31000 X/7343-43 T543X108(1)003A(2)(3)(4) 300 10 30 2869 105 3
31500 X/7343-43 T543X158(1)003A(2)(3)(4) 450 10 85557 105 3
415 T/3528-12 T543T156(1)004A(2)(3)(4) 6 8 100 1025 105 3
433 A/3216-18 T543A336(1)004A(2)(3)(4) 13 870 1265 105 3
433 A/3216-18 T543A336(1)004A(2)(3)(4) 13 880 1183 105 3
447 A/3216-18 T543A476(1)004A(2)(3)(4) 19 870 1265 105 3
447 A/3216-18 T543A476(1)004A(2)(3)(4) 19 880 1183 105 3
447 T/3528-12 T543T476(1)004A(2)(3)(4) 19 870 1225 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 95000 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 10 4743 105 3
2.5 470 D/7343-31 T543D477(1)2R5A(2)(3)(4) 118 10 25 3000 105 3
2.5 560 D/7343-31 T543D567(1)2R5A(2)(3)(4) 140 10 56708 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 66124 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 10 4743 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 15 3873 105 3
2.5 680 D/7343-31 T543D687(1)2R5A(2)(3)(4) 170 10 40 2372 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 56943 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 66338 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 10 4909 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 15 4008 105 3
2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)(4) 170 10 25 3105 105 3
2.5 680 X/7343-43 T543X687(1)2R5A(2)(3)(4) 170 10 66416 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 56943 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 66338 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 10 4909 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 15 4008 105 3
2.5 1000 Y/7343-40 T543Y108(1)2R5A(2)(3)(4) 250 10 25 3105 105 3
2.5 1000 X/7343-43 T543X108(1)2R5A(2)(3)(4) 250 10 57029 105 3
2.5 1000 X/7343-43 T543X108(1)2R5A(2)(3)(4) 250 10 66416 105 3
2.5 1000 X/7343-43 T543X108(1)2R5A(2)(3)(4) 250 10 10 4970 105 3
2.5 1500 X/7343-43 T543X158(1)2R5A(2)(3)(4) 375 10 57029 105 3
2.5 1500 X/7343-43 T543X158(1)2R5A(2)(3)(4) 375 10 10 4970 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 835 1905 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 840 1782 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 870 1347 105 3
3100 B/3528-21 T543B107(1)003A(2)(3)(4) 30 880 1260 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 835 1905 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 840 1782 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 870 1347 105 3
3150 B/3528-21 T543B157(1)003A(2)(3)(4) 45 880 1260 105 3
3330 V/7343-20 T543V337(1)003A(2)(3)(4) 99 10 15 3531 105 3
3330 V/7343-20 T543V337(1)003A(2)(3)(4) 99 10 25 2735 105 3
3330 D/7343-31 T543D337(1)003A(2)(3)(4) 99 10 25 3000 105 3
3470 D/7343-31 T543D477(1)003A(2)(3)(4) 141 10 10 4743 105 3
3470 D/7343-31 T543D477(1)003A(2)(3)(4) 141 10 25 3000 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 10 4743 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 15 3873 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 25 3000 105 3
3680 D/7343-31 T543D687(1)003A(2)(3)(4) 204 10 40 2372 105 3
31000 X/7343-43 T543X108(1)003A(2)(3)(4) 300 10 10 4970 105 3
31000 X/7343-43 T543X108(1)003A(2)(3)(4) 300 10 15 4058 105 3
31000 X/7343-43 T543X108(1)003A(2)(3)(4) 300 10 30 2869 105 3
31500 X/7343-43 T543X158(1)003A(2)(3)(4) 450 10 85557 105 3
415 T/3528-12 T543T156(1)004A(2)(3)(4) 6 8 100 1025 105 3
433 A/3216-18 T543A336(1)004A(2)(3)(4) 13 870 1265 105 3
433 A/3216-18 T543A336(1)004A(2)(3)(4) 13 880 1183 105 3
447 A/3216-18 T543A476(1)004A(2)(3)(4) 19 870 1265 105 3
447 A/3216-18 T543A476(1)004A(2)(3)(4) 19 880 1183 105 3
447 T/3528-12 T543T476(1)004A(2)(3)(4) 19 870 1225 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 144
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 88
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
468 T/3528-12 T543T686(1)004A(2)(3)(4) 27 870 1225 105 3
468 T/3528-12 T543T686(1)004A(2)(3)(4) 27 880 1146 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 835 1905 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 840 1782 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 870 1347 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 880 1260 105 3
468 U/6032-15 T543U686(1)004A(2)(3)(4) 27 855 1567 105 3
4100 A/3216-18 T543A107(1)004A(2)(3)(4) 40 8150 864 105 3
4100 A/3216-18 T543A107(1)004A(2)(3)(4) 40 8200 748 105 3
4100 T/3528-12 T543T107(1)004A(2)(3)(4) 40 870 1225 105 3
4100 T/3528-12 T543T107(1)004A(2)(3)(4) 40 8150 837 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 835 1905 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 840 1782 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 870 1347 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 880 1260 105 3
4100 U/6032-15 T543U107(1)004A(2)(3)(4) 40 855 1567 105 3
4150 B/3528-21 T543B157(1)004A(2)(3)(4) 60 835 1905 105 3
4150 B/3528-21 T543B157(1)004A(2)(3)(4) 60 840 1782 105 3
4150 B/3528-21 T543B157(1)004A(2)(3)(4) 60 870 1347 105 3
4150 U/6032-15 T543U157(1)004A(2)(3)(4) 60 855 1567 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 815 3317 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 825 2569 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 845 1915 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 8100 1285 105 3
4150 V/7343-20 T543V157(1)004A(2)(3)(4) 60 10 15 3531 105 3
4150 V/7343-20 T543V157(1)004A(2)(3)(4) 60 10 25 2735 105 3
4220 B/3528-21 T543B227(1)004A(2)(3)(4) 88 835 1905 105 3
4220 B/3528-21 T543B227(1)004A(2)(3)(4) 88 845 1680 105 3
4220 B/3528-21 T543B227(1)004A(2)(3)(4) 88 870 1347 105 3
4220 L/6032-19 T543L227(1)004A(2)(3)(4) 88 812 3536 105 3
4220 L/6032-19 T543L227(1)004A(2)(3)(4) 88 825 2449 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 815 3317 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 818 3028 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 825 2569 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 845 1915 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 855 1732 105 3
4220 W/7343-15 T543W227(1)004A(2)(3)(4) 88 10 25 2683 105 3
4220 W/7343-15 T543W227(1)004A(2)(3)(4) 88 10 40 2121 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 15 3531 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 18 3223 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 25 2735 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 40 2162 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 45 2039 105 3
4220 D/7343-31 T543D227(1)004A(2)(3)(4) 88 10 25 3000 105 3
4220 D/7343-31 T543D227(1)004A(2)(3)(4) 88 10 65 1861 105 3
4330 C/6032-28 T543C337(1)004A(2)(3)(4) 132 825 2569 105 3
4330 C/6032-28 T543C337(1)004A(2)(3)(4) 132 845 1915 105 3
4330 V/7343-20 T543V337(1)004A(2)(3)(4) 132 10 18 3223 105 3
4330 V/7343-20 T543V337(1)004A(2)(3)(4) 132 10 25 2735 105 3
4330 V/7343-20 T543V337(1)004A(2)(3)(4) 132 10 40 2162 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 56708 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
468 T/3528-12 T543T686(1)004A(2)(3)(4) 27 870 1225 105 3
468 T/3528-12 T543T686(1)004A(2)(3)(4) 27 880 1146 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 835 1905 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 840 1782 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 870 1347 105 3
468 B/3528-21 T543B686(1)004A(2)(3)(4) 27 880 1260 105 3
468 U/6032-15 T543U686(1)004A(2)(3)(4) 27 855 1567 105 3
4100 A/3216-18 T543A107(1)004A(2)(3)(4) 40 8150 864 105 3
4100 A/3216-18 T543A107(1)004A(2)(3)(4) 40 8200 748 105 3
4100 T/3528-12 T543T107(1)004A(2)(3)(4) 40 870 1225 105 3
4100 T/3528-12 T543T107(1)004A(2)(3)(4) 40 8150 837 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 835 1905 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 840 1782 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 870 1347 105 3
4100 B/3528-21 T543B107(1)004A(2)(3)(4) 40 880 1260 105 3
4100 U/6032-15 T543U107(1)004A(2)(3)(4) 40 855 1567 105 3
4150 B/3528-21 T543B157(1)004A(2)(3)(4) 60 835 1905 105 3
4150 B/3528-21 T543B157(1)004A(2)(3)(4) 60 840 1782 105 3
4150 B/3528-21 T543B157(1)004A(2)(3)(4) 60 870 1347 105 3
4150 U/6032-15 T543U157(1)004A(2)(3)(4) 60 855 1567 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 815 3317 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 825 2569 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 845 1915 105 3
4150 C/6032-28 T543C157(1)004A(2)(3)(4) 60 8100 1285 105 3
4150 V/7343-20 T543V157(1)004A(2)(3)(4) 60 10 15 3531 105 3
4150 V/7343-20 T543V157(1)004A(2)(3)(4) 60 10 25 2735 105 3
4220 B/3528-21 T543B227(1)004A(2)(3)(4) 88 835 1905 105 3
4220 B/3528-21 T543B227(1)004A(2)(3)(4) 88 845 1680 105 3
4220 B/3528-21 T543B227(1)004A(2)(3)(4) 88 870 1347 105 3
4220 L/6032-19 T543L227(1)004A(2)(3)(4) 88 812 3536 105 3
4220 L/6032-19 T543L227(1)004A(2)(3)(4) 88 825 2449 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 815 3317 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 818 3028 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 825 2569 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 845 1915 105 3
4220 C/6032-28 T543C227(1)004A(2)(3)(4) 88 855 1732 105 3
4220 W/7343-15 T543W227(1)004A(2)(3)(4) 88 10 25 2683 105 3
4220 W/7343-15 T543W227(1)004A(2)(3)(4) 88 10 40 2121 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 15 3531 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 18 3223 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 25 2735 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 40 2162 105 3
4220 V/7343-20 T543V227(1)004A(2)(3)(4) 88 10 45 2039 105 3
4220 D/7343-31 T543D227(1)004A(2)(3)(4) 88 10 25 3000 105 3
4220 D/7343-31 T543D227(1)004A(2)(3)(4) 88 10 65 1861 105 3
4330 C/6032-28 T543C337(1)004A(2)(3)(4) 132 825 2569 105 3
4330 C/6032-28 T543C337(1)004A(2)(3)(4) 132 845 1915 105 3
4330 V/7343-20 T543V337(1)004A(2)(3)(4) 132 10 18 3223 105 3
4330 V/7343-20 T543V337(1)004A(2)(3)(4) 132 10 25 2735 105 3
4330 V/7343-20 T543V337(1)004A(2)(3)(4) 132 10 40 2162 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 56708 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 145
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 99
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 66124 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 75669 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 95000 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 10 4743 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 12 4330 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 15 3873 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 25 3000 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 40 2372 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 45 2236 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 66124 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 10 4743 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 12 4330 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 15 3873 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 18 3536 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 25 3000 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 40 2372 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 56943 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 66338 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 10 4909 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 25 3105 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 40 2455 105 3
4680 D-7343-31 T543D687(1)004A(2)(3)(4) 272 10 25 3000 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 56943 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 10 4909 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 15 4008 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 25 3105 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 57029 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 66416 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 10 4970 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 15 4058 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 35 2657 105 3
41000 X/7343-43 T543X108(1)004A(2)(3)(4) 400 10 66416 105 3
41000 X/7343-43 T543X108(1)004A(2)(3)(4) 400 10 10 4970 105 3
6.3 15 T/3528-12 T543T156(1)006A(2)(3)(4) 9 8 100 1025 105 3
6.3 22 A/3216-18 T543A226(1)006A(2)(3)(4) 14 890 1116 105 3
6.3 22 A/3216-18 T543A226(1)006A(2)(3)(4) 14 8100 1058 105 3
6.3 33 A/3216-18 T543A336(1)006A(2)(3)(4) 21 870 1265 105 3
6.3 33 A/3216-18 T543A336(1)006A(2)(3)(4) 21 880 1183 105 3
6.3 33 A/3216-18 T543A336(1)006A(2)(3)(4) 21 8120 966 105 3
6.3 33 T/3528-12 T543T336(1)006A(2)(3)(4) 21 870 1225 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 825 2254 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 835 1905 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 840 1782 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 870 1347 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 880 1260 105 3
6.3 33 C/6032-28 T543C336(1)006A(2)(3)(4) 21 8100 1285 105 3
6.3 47 A/3216-18 T543A476(1)006A(2)(3)(4) 30 8150 864 105 3
6.3 47 T/3528-12 T543T476(1)006A(2)(3)(4) 30 870 1225 105 3
6.3 47 T/3528-12 T543T476(1)006A(2)(3)(4) 30 880 1146 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 825 2254 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 835 1905 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 66124 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 75669 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 95000 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 10 4743 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 12 4330 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 15 3873 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 25 3000 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 40 2372 105 3
4330 D/7343-31 T543D337(1)004A(2)(3)(4) 132 10 45 2236 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 66124 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 10 4743 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 12 4330 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 15 3873 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 18 3536 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 25 3000 105 3
4470 D/7343-31 T543D477(1)004A(2)(3)(4) 188 10 40 2372 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 56943 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 66338 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 10 4909 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 25 3105 105 3
4470 Y/7343-40 T543Y477(1)004A(2)(3)(4) 188 10 40 2455 105 3
4680 D-7343-31 T543D687(1)004A(2)(3)(4) 272 10 25 3000 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 56943 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 10 4909 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 15 4008 105 3
4680 Y/7343-40 T543Y687(1)004A(2)(3)(4) 272 10 25 3105 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 57029 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 66416 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 10 4970 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 15 4058 105 3
4680 X/7343-43 T543X687(1)004A(2)(3)(4) 272 10 35 2657 105 3
41000 X/7343-43 T543X108(1)004A(2)(3)(4) 400 10 66416 105 3
41000 X/7343-43 T543X108(1)004A(2)(3)(4) 400 10 10 4970 105 3
6.3 15 T/3528-12 T543T156(1)006A(2)(3)(4) 9 8 100 1025 105 3
6.3 22 A/3216-18 T543A226(1)006A(2)(3)(4) 14 890 1116 105 3
6.3 22 A/3216-18 T543A226(1)006A(2)(3)(4) 14 8100 1058 105 3
6.3 33 A/3216-18 T543A336(1)006A(2)(3)(4) 21 870 1265 105 3
6.3 33 A/3216-18 T543A336(1)006A(2)(3)(4) 21 880 1183 105 3
6.3 33 A/3216-18 T543A336(1)006A(2)(3)(4) 21 8120 966 105 3
6.3 33 T/3528-12 T543T336(1)006A(2)(3)(4) 21 870 1225 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 825 2254 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 835 1905 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 840 1782 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 870 1347 105 3
6.3 33 B/3528-21 T543B336(1)006A(2)(3)(4) 21 880 1260 105 3
6.3 33 C/6032-28 T543C336(1)006A(2)(3)(4) 21 8100 1285 105 3
6.3 47 A/3216-18 T543A476(1)006A(2)(3)(4) 30 8150 864 105 3
6.3 47 T/3528-12 T543T476(1)006A(2)(3)(4) 30 870 1225 105 3
6.3 47 T/3528-12 T543T476(1)006A(2)(3)(4) 30 880 1146 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 825 2254 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 835 1905 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 146
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1010
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 840 1782 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 870 1347 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 880 1260 105 3
6.3 68 A/3216-18 T543A686(1)006A(2)(3)(4) 43 8150 864 105 3
6.3 68 T/3528-12 T543T686(1)006A(2)(3)(4) 43 870 1225 105 3
6.3 68 T/3528-12 T543T686(1)006A(2)(3)(4) 43 8150 837 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 825 2254 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 835 1905 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 840 1782 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 870 1347 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 880 1260 105 3
6.3 68 U/6032-15 T543U686(1)006A(2)(3)(4) 43 855 1567 105 3
6.3 68 U/6032-15 T543U686(1)006A(2)(3)(4) 43 870 1389 105 3
6.3 68 C/6032-28 T543C686(1)006A(2)(3)(4) 43 8100 1285 105 3
6.3 100 T/3528-12 T543T107(1)006A(2)(3)(4) 63 870 1225 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 825 2254 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 835 1905 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 840 1782 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 845 1680 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 870 1347 105 3
6.3 100 U/6032-15 T543U107(1)006A(2)(3)(4) 63 855 1567 105 3
6.3 100 C/6032-28 T543C107(1)006A(2)(3)(4) 63 825 2569 105 3
6.3 100 C/6032-28 T543C107(1)006A(2)(3)(4) 63 845 1915 105 3
6.3 100 W/7343-15 T543W107(1)006A(2)(3)(4) 63 10 40 2121 105 3
6.3 100 V/7343-20 T543V107(1)006A(2)(3)(4) 63 10 15 3531 105 3
6.3 100 V/7343-20 T543V107(1)006A(2)(3)(4) 63 10 45 2039 105 3
6.3 120 B/3528-21 T543B127(1)006A(2)(3)(4) 76 835 1905 105 3
6.3 150 M/3528-15 T543M157(1)006A(2)(3)(4) 95 870 1309 105 3
6.3 150 M/3528-15 T543M157(1)006A(2)(3)(4) 95 8150 894 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 825 2254 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 835 1905 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 845 1680 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 870 1347 105 3
6.3 150 U/6032-15 T543U157(1)006A(2)(3)(4) 95 845 1732 105 3
6.3 150 U/6032-15 T543U157(1)006A(2)(3)(4) 95 855 1567 105 3
6.3 150 L/6032-19 T543L157(1)006A(2)(3)(4) 95 812 3536 105 3
6.3 150 L/6032-19 T543L157(1)006A(2)(3)(4) 95 825 2449 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 815 3317 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 825 2569 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 845 1915 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 855 1732 105 3
6.3 150 W/7343-15 T543W157(1)006A(2)(3)(4) 95 10 25 2683 105 3
6.3 150 W/7343-15 T543W157(1)006A(2)(3)(4) 95 10 40 2121 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 15 3531 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 18 3223 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 25 2735 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 40 2162 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 45 2039 105 3
6.3 150 D/7343-31 T543D157(1)006A(2)(3)(4) 95 10 15 3873 105 3
6.3 150 D/7343-31 T543D157(1)006A(2)(3)(4) 95 10 25 3000 105 3
6.3 150 D/7343-31 T543D157(1)006A(2)(3)(4) 95 10 55 2023 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 840 1782 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 870 1347 105 3
6.3 47 B/3528-21 T543B476(1)006A(2)(3)(4) 30 880 1260 105 3
6.3 68 A/3216-18 T543A686(1)006A(2)(3)(4) 43 8150 864 105 3
6.3 68 T/3528-12 T543T686(1)006A(2)(3)(4) 43 870 1225 105 3
6.3 68 T/3528-12 T543T686(1)006A(2)(3)(4) 43 8150 837 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 825 2254 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 835 1905 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 840 1782 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 870 1347 105 3
6.3 68 B/3528-21 T543B686(1)006A(2)(3)(4) 43 880 1260 105 3
6.3 68 U/6032-15 T543U686(1)006A(2)(3)(4) 43 855 1567 105 3
6.3 68 U/6032-15 T543U686(1)006A(2)(3)(4) 43 870 1389 105 3
6.3 68 C/6032-28 T543C686(1)006A(2)(3)(4) 43 8100 1285 105 3
6.3 100 T/3528-12 T543T107(1)006A(2)(3)(4) 63 870 1225 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 825 2254 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 835 1905 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 840 1782 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 845 1680 105 3
6.3 100 B/3528-21 T543B107(1)006A(2)(3)(4) 63 870 1347 105 3
6.3 100 U/6032-15 T543U107(1)006A(2)(3)(4) 63 855 1567 105 3
6.3 100 C/6032-28 T543C107(1)006A(2)(3)(4) 63 825 2569 105 3
6.3 100 C/6032-28 T543C107(1)006A(2)(3)(4) 63 845 1915 105 3
6.3 100 W/7343-15 T543W107(1)006A(2)(3)(4) 63 10 40 2121 105 3
6.3 100 V/7343-20 T543V107(1)006A(2)(3)(4) 63 10 15 3531 105 3
6.3 100 V/7343-20 T543V107(1)006A(2)(3)(4) 63 10 45 2039 105 3
6.3 120 B/3528-21 T543B127(1)006A(2)(3)(4) 76 835 1905 105 3
6.3 150 M/3528-15 T543M157(1)006A(2)(3)(4) 95 870 1309 105 3
6.3 150 M/3528-15 T543M157(1)006A(2)(3)(4) 95 8150 894 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 825 2254 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 835 1905 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 845 1680 105 3
6.3 150 B/3528-21 T543B157(1)006A(2)(3)(4) 95 870 1347 105 3
6.3 150 U/6032-15 T543U157(1)006A(2)(3)(4) 95 845 1732 105 3
6.3 150 U/6032-15 T543U157(1)006A(2)(3)(4) 95 855 1567 105 3
6.3 150 L/6032-19 T543L157(1)006A(2)(3)(4) 95 812 3536 105 3
6.3 150 L/6032-19 T543L157(1)006A(2)(3)(4) 95 825 2449 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 815 3317 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 825 2569 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 845 1915 105 3
6.3 150 C/6032-28 T543C157(1)006A(2)(3)(4) 95 855 1732 105 3
6.3 150 W/7343-15 T543W157(1)006A(2)(3)(4) 95 10 25 2683 105 3
6.3 150 W/7343-15 T543W157(1)006A(2)(3)(4) 95 10 40 2121 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 15 3531 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 18 3223 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 25 2735 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 40 2162 105 3
6.3 150 V/7343-20 T543V157(1)006A(2)(3)(4) 95 10 45 2039 105 3
6.3 150 D/7343-31 T543D157(1)006A(2)(3)(4) 95 10 15 3873 105 3
6.3 150 D/7343-31 T543D157(1)006A(2)(3)(4) 95 10 25 3000 105 3
6.3 150 D/7343-31 T543D157(1)006A(2)(3)(4) 95 10 55 2023 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 147
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1111
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
6.3 220 B/3528-21 T543B227(1)006A(2)(3)(4) 139 835 1905 105 3
6.3 220 B/3528-21 T543B227(1)006A(2)(3)(4) 139 845 1680 105 3
6.3 220 B/3528-21 T543B227(1)006A(2)(3)(4) 139 870 1347 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 815 3317 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 818 3028 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 825 2569 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 845 1915 105 3
6.3 220 V/7343-20 T543V227(1)006A(2)(3)(4) 139 10 18 3223 105 3
6.3 220 V/7343-20 T543V227(1)006A(2)(3)(4) 139 10 25 2735 105 3
6.3 220 V/7343-20 T543V227(1)006A(2)(3)(4) 139 10 40 2162 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 56708 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 66124 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 75669 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 95000 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 10 4743 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 15 3873 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 18 3536 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 25 3000 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 40 2372 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 50 2121 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 15 3531 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 18 3223 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 25 2735 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 40 2162 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 45 2039 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 66124 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 95000 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 10 4743 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 15 3873 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 18 3536 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 25 3000 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 40 2372 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 45 2236 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 56943 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 66338 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 10 4909 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 15 4008 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 25 3105 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 40 2455 105 3
6.3 470 W/7343-15 T543W477(1)006A(2)(3)(4) 296 10 55 1809 85 3
6.3 470 V/7343-20 T543V477(1)006A(2)(3)(4) 296 10 55 1844 85 3
6.3 470 D-7343-31 T543D477(1)006A(2)(3)(4) 296 10 15 3873 105 3
6.3 470 D-7343-31 T543D477(1)006A(2)(3)(4) 296 10 25 3000 105 3
6.3 470 D-7343-31 T543D477(1)006A(2)(3)(4) 296 10 30 2739 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 56943 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 10 4909 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 15 4008 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 18 3659 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 25 3105 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 35 2624 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 57029 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
6.3 220 B/3528-21 T543B227(1)006A(2)(3)(4) 139 835 1905 105 3
6.3 220 B/3528-21 T543B227(1)006A(2)(3)(4) 139 845 1680 105 3
6.3 220 B/3528-21 T543B227(1)006A(2)(3)(4) 139 870 1347 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 815 3317 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 818 3028 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 825 2569 105 3
6.3 220 C/6032-28 T543C227(1)006A(2)(3)(4) 139 845 1915 105 3
6.3 220 V/7343-20 T543V227(1)006A(2)(3)(4) 139 10 18 3223 105 3
6.3 220 V/7343-20 T543V227(1)006A(2)(3)(4) 139 10 25 2735 105 3
6.3 220 V/7343-20 T543V227(1)006A(2)(3)(4) 139 10 40 2162 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 56708 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 66124 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 75669 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 95000 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 10 4743 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 15 3873 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 18 3536 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 25 3000 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 40 2372 105 3
6.3 220 D/7343-31 T543D227(1)006A(2)(3)(4) 139 10 50 2121 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 15 3531 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 18 3223 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 25 2735 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 40 2162 105 3
6.3 330 V/7343-20 T543V337(1)006A(2)(3)(4) 208 10 45 2039 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 66124 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 95000 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 10 4743 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 15 3873 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 18 3536 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 25 3000 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 40 2372 105 3
6.3 330 D/7343-31 T543D337(1)006A(2)(3)(4) 208 10 45 2236 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 56943 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 66338 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 10 4909 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 15 4008 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 25 3105 105 3
6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)(4) 208 10 40 2455 105 3
6.3 470 W/7343-15 T543W477(1)006A(2)(3)(4) 296 10 55 1809 85 3
6.3 470 V/7343-20 T543V477(1)006A(2)(3)(4) 296 10 55 1844 85 3
6.3 470 D-7343-31 T543D477(1)006A(2)(3)(4) 296 10 15 3873 105 3
6.3 470 D-7343-31 T543D477(1)006A(2)(3)(4) 296 10 25 3000 105 3
6.3 470 D-7343-31 T543D477(1)006A(2)(3)(4) 296 10 30 2739 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 56943 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 10 4909 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 15 4008 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 18 3659 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 25 3105 105 3
6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)(4) 296 10 35 2624 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 57029 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 148
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1212
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 66416 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 10 4970 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 18 3704 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 35 2657 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 40 2485 105 3
6.3 680 X/7343-43 T543X687(1)006A(2)(3)(4) 428 10 10 4970 105 3
6.3 680 X/7343-43 T543X687(1)006A(2)(3)(4) 428 10 18 3704 105 3
6.3 1000 H/7360-20 T543H108(1)006A(2)(3)(4) 630 20 55 1844 85 4
6.3 1500 H/7360-20 T543H158(1)006A(2)(3)(4) 945 20 55 1844 85 4
833 T/3528-12 T543T336(1)008A(2)(3)(4) 26 870 1225 105 3
833 T/3528-12 T543T336(1)008A(2)(3)(4) 26 880 1146 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 825 2254 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 835 1905 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 840 1782 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 870 1347 105 3
833 U/6032-15 T543U336(1)008A(2)(3)(4) 26 870 1389 105 3
847 B/3528-21 T543B476(1)008A(2)(3)(4) 38 835 1905 105 3
847 B/3528-21 T543B476(1)008A(2)(3)(4) 38 870 1347 105 3
8150 V/7343-20 T543V157(1)008A(2)(3)(4) 120 10 40 2162 105 3
8150 D/7343-31 T543D157(1)008A(2)(3)(4) 120 10 25 3000 105 3
8150 D/7343-31 T543D157(1)008A(2)(3)(4) 120 10 40 2372 105 3
8150 D/7343-31 T543D157(1)008A(2)(3)(4) 120 10 55 2023 105 3
10 10 A/3216-18 T543A106(1)010A(2)(3)(4) 10 880 1183 105 3
10 15 A/3216-18 T543A156(1)010A(2)(3)(4) 15 880 1183 105 3
10 22 A/3216-18 T543A226(1)010A(2)(3)(4) 22 880 1183 105 3
10 22 B/3528-21 T543B226(1)010A(2)(3)(4) 22 880 1260 105 3
10 33 T/3528-12 T543T336(1)010A(2)(3)(4) 33 870 1225 105 3
10 33 T/3528-12 T543T336(1)010A(2)(3)(4) 33 880 1146 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 825 2254 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 835 1905 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 840 1782 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 870 1347 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 880 1260 105 3
10 33 U/6032-15 T543U336(1)010A(2)(3)(4) 33 870 1389 105 3
10 47 B/3528-21 T543B476(1)010A(2)(3)(4) 47 835 1905 105 3
10 47 B/3528-21 T543B476(1)010A(2)(3)(4) 47 870 1347 105 3
10 47 U/6032-15 T543U476(1)010A(2)(3)(4) 47 855 1567 105 3
10 47 C/6032-28 T543C476(1)010A(2)(3)(4) 47 8100 1285 105 3
10 68 U/6032-15 T543U686(1)010A(2)(3)(4) 68 855 1567 105 3
10 68 C/6032-28 T543C686(1)010A(2)(3)(4) 68 845 1915 105 3
10 68 W/7343-15 T543W686(1)010A(2)(3)(4) 68 10 25 2683 105 3
10 68 W/7343-15 T543W686(1)010A(2)(3)(4) 68 10 40 2121 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 25 2735 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 40 2162 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 45 2039 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 60 1765 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 100 1367 105 3
10 68 D/7343-31 T543D686(1)010A(2)(3)(4) 68 10 100 1500 105 3
10 100 L/6032-19 T543L107(1)010A(2)(3)(4) 100 825 2449 105 3
10 100 C/6032-28 T543C107(1)010A(2)(3)(4) 100 825 2569 105 3
10 100 C/6032-28 T543C107(1)010A(2)(3)(4) 100 845 1915 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 66416 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 10 4970 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 18 3704 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 35 2657 105 3
6.3 470 X/7343-43 T543X477(1)006A(2)(3)(4) 296 10 40 2485 105 3
6.3 680 X/7343-43 T543X687(1)006A(2)(3)(4) 428 10 10 4970 105 3
6.3 680 X/7343-43 T543X687(1)006A(2)(3)(4) 428 10 18 3704 105 3
6.3 1000 H/7360-20 T543H108(1)006A(2)(3)(4) 630 20 55 1844 85 4
6.3 1500 H/7360-20 T543H158(1)006A(2)(3)(4) 945 20 55 1844 85 4
833 T/3528-12 T543T336(1)008A(2)(3)(4) 26 870 1225 105 3
833 T/3528-12 T543T336(1)008A(2)(3)(4) 26 880 1146 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 825 2254 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 835 1905 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 840 1782 105 3
833 B/3528-21 T543B336(1)008A(2)(3)(4) 26 870 1347 105 3
833 U/6032-15 T543U336(1)008A(2)(3)(4) 26 870 1389 105 3
847 B/3528-21 T543B476(1)008A(2)(3)(4) 38 835 1905 105 3
847 B/3528-21 T543B476(1)008A(2)(3)(4) 38 870 1347 105 3
8150 V/7343-20 T543V157(1)008A(2)(3)(4) 120 10 40 2162 105 3
8150 D/7343-31 T543D157(1)008A(2)(3)(4) 120 10 25 3000 105 3
8150 D/7343-31 T543D157(1)008A(2)(3)(4) 120 10 40 2372 105 3
8150 D/7343-31 T543D157(1)008A(2)(3)(4) 120 10 55 2023 105 3
10 10 A/3216-18 T543A106(1)010A(2)(3)(4) 10 880 1183 105 3
10 15 A/3216-18 T543A156(1)010A(2)(3)(4) 15 880 1183 105 3
10 22 A/3216-18 T543A226(1)010A(2)(3)(4) 22 880 1183 105 3
10 22 B/3528-21 T543B226(1)010A(2)(3)(4) 22 880 1260 105 3
10 33 T/3528-12 T543T336(1)010A(2)(3)(4) 33 870 1225 105 3
10 33 T/3528-12 T543T336(1)010A(2)(3)(4) 33 880 1146 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 825 2254 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 835 1905 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 840 1782 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 870 1347 105 3
10 33 B/3528-21 T543B336(1)010A(2)(3)(4) 33 880 1260 105 3
10 33 U/6032-15 T543U336(1)010A(2)(3)(4) 33 870 1389 105 3
10 47 B/3528-21 T543B476(1)010A(2)(3)(4) 47 835 1905 105 3
10 47 B/3528-21 T543B476(1)010A(2)(3)(4) 47 870 1347 105 3
10 47 U/6032-15 T543U476(1)010A(2)(3)(4) 47 855 1567 105 3
10 47 C/6032-28 T543C476(1)010A(2)(3)(4) 47 8100 1285 105 3
10 68 U/6032-15 T543U686(1)010A(2)(3)(4) 68 855 1567 105 3
10 68 C/6032-28 T543C686(1)010A(2)(3)(4) 68 845 1915 105 3
10 68 W/7343-15 T543W686(1)010A(2)(3)(4) 68 10 25 2683 105 3
10 68 W/7343-15 T543W686(1)010A(2)(3)(4) 68 10 40 2121 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 25 2735 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 40 2162 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 45 2039 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 60 1765 105 3
10 68 V/7343-20 T543V686(1)010A(2)(3)(4) 68 10 100 1367 105 3
10 68 D/7343-31 T543D686(1)010A(2)(3)(4) 68 10 100 1500 105 3
10 100 L/6032-19 T543L107(1)010A(2)(3)(4) 100 825 2449 105 3
10 100 C/6032-28 T543C107(1)010A(2)(3)(4) 100 825 2569 105 3
10 100 C/6032-28 T543C107(1)010A(2)(3)(4) 100 845 1915 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 149
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1313
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
10 100 W/7343-15 T543W107(1)010A(2)(3)(4) 100 10 40 2121 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 18 3223 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 25 2735 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 45 2039 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 50 1934 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 18 3536 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 25 3000 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 55 2023 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 80 1677 105 3
10 150 C/6032-28 T543C157(1)010A(2)(3)(4) 150 855 1732 105 3
10 150 V/7343-20 T543V157(1)010A(2)(3)(4) 150 10 25 2735 105 3
10 150 V/7343-20 T543V157(1)010A(2)(3)(4) 150 10 40 2162 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 56708 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 66124 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 10 4743 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 15 3873 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 18 3536 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 25 3000 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 40 2372 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 55 2023 105 3
10 150 Y/7343-40 T543Y157(1)010A(2)(3)(4) 150 10 25 3105 105 3
10 150 Y/7343-40 T543Y157(1)010A(2)(3)(4) 150 10 18 3659 105 3
10 150 Y/7343-40 T543Y157(1)010A(2)(3)(4) 150 10 25 3105 105 3
10 220 V/7343-20 T543V227(1)010A(2)(3)(4) 220 10 25 2735 105 3
10 220 V/7343-20 T543V227(1)010A(2)(3)(4) 220 10 45 2039 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 66124 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 10 4743 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 18 3536 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 25 3000 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 40 2372 105 3
10 220 Y/7343-40 T543Y227(1)010A(2)(3)(4) 220 10 66338 105 3
10 220 Y/7343-40 T543Y227(1)010A(2)(3)(4) 220 10 10 4909 105 3
10 220 Y/7343-40 T543Y227(1)010A(2)(3)(4) 220 10 40 2455 105 3
10 330 Y/7343-40 T543Y337(1)010A(2)(3)(4) 330 10 15 4008 105 3
10 330 Y/7343-40 T543Y337(1)010A(2)(3)(4) 330 10 35 2624 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 57029 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 66416 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 10 4970 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 25 3143 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 40 2485 105 3
12.5 10 T/3528-12 T543T106(1)12RA(2)(3)(4) 13 8150 837 105 3
12.5 15 T/3528-12 T543T156(1)12RA(2)(3)(4) 19 880 1146 105 3
12.5 330 X/7343-43 T543X337(1)12RA(2)(3)(4) 413 10 15 4058 105 3
16 10 B/3528-21 T543B106(1)016A(2)(3)(4) 16 8100 1127 105 3
16 22 C/6032-28 T543C226(1)016A(2)(3)(4) 35 880 1436 105 3
16 33 W/7343-15 T543W336(1)016A(2)(3)(4) 53 10 45 2000 105 3
16 33 V/7343-20 T543V336(1)016A(2)(3)(4) 53 10 45 2039 105 3
16 33 V/7343-20 T543V336(1)016A(2)(3)(4) 53 10 60 1765 105 3
16 33 V/7343-20 T543V336(1)016A(2)(3)(4) 53 10 70 1634 105 3
16 47 W/7343-15 T543W476(1)016A(2)(3)(4) 75 10 45 2000 105 3
16 47 V/7343-20 T543V476(1)016A(2)(3)(4) 75 10 45 2039 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
10 100 W/7343-15 T543W107(1)010A(2)(3)(4) 100 10 40 2121 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 18 3223 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 25 2735 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 45 2039 105 3
10 100 V/7343-20 T543V107(1)010A(2)(3)(4) 100 10 50 1934 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 18 3536 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 25 3000 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 55 2023 105 3
10 100 D/7343-31 T543D107(1)010A(2)(3)(4) 100 10 80 1677 105 3
10 150 C/6032-28 T543C157(1)010A(2)(3)(4) 150 855 1732 105 3
10 150 V/7343-20 T543V157(1)010A(2)(3)(4) 150 10 25 2735 105 3
10 150 V/7343-20 T543V157(1)010A(2)(3)(4) 150 10 40 2162 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 56708 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 66124 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 10 4743 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 15 3873 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 18 3536 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 25 3000 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 40 2372 105 3
10 150 D/7343-31 T543D157(1)010A(2)(3)(4) 150 10 55 2023 105 3
10 150 Y/7343-40 T543Y157(1)010A(2)(3)(4) 150 10 25 3105 105 3
10 150 Y/7343-40 T543Y157(1)010A(2)(3)(4) 150 10 18 3659 105 3
10 150 Y/7343-40 T543Y157(1)010A(2)(3)(4) 150 10 25 3105 105 3
10 220 V/7343-20 T543V227(1)010A(2)(3)(4) 220 10 25 2735 105 3
10 220 V/7343-20 T543V227(1)010A(2)(3)(4) 220 10 45 2039 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 66124 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 10 4743 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 18 3536 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 25 3000 105 3
10 220 D/7343-31 T543D227(1)010A(2)(3)(4) 220 10 40 2372 105 3
10 220 Y/7343-40 T543Y227(1)010A(2)(3)(4) 220 10 66338 105 3
10 220 Y/7343-40 T543Y227(1)010A(2)(3)(4) 220 10 10 4909 105 3
10 220 Y/7343-40 T543Y227(1)010A(2)(3)(4) 220 10 40 2455 105 3
10 330 Y/7343-40 T543Y337(1)010A(2)(3)(4) 330 10 15 4008 105 3
10 330 Y/7343-40 T543Y337(1)010A(2)(3)(4) 330 10 35 2624 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 57029 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 66416 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 10 4970 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 25 3143 105 3
10 330 X/7343-43 T543X337(1)010A(2)(3)(4) 330 10 40 2485 105 3
12.5 10 T/3528-12 T543T106(1)12RA(2)(3)(4) 13 8150 837 105 3
12.5 15 T/3528-12 T543T156(1)12RA(2)(3)(4) 19 880 1146 105 3
12.5 330 X/7343-43 T543X337(1)12RA(2)(3)(4) 413 10 15 4058 105 3
16 10 B/3528-21 T543B106(1)016A(2)(3)(4) 16 8100 1127 105 3
16 22 C/6032-28 T543C226(1)016A(2)(3)(4) 35 880 1436 105 3
16 33 W/7343-15 T543W336(1)016A(2)(3)(4) 53 10 45 2000 105 3
16 33 V/7343-20 T543V336(1)016A(2)(3)(4) 53 10 45 2039 105 3
16 33 V/7343-20 T543V336(1)016A(2)(3)(4) 53 10 60 1765 105 3
16 33 V/7343-20 T543V336(1)016A(2)(3)(4) 53 10 70 1634 105 3
16 47 W/7343-15 T543W476(1)016A(2)(3)(4) 75 10 45 2000 105 3
16 47 V/7343-20 T543V476(1)016A(2)(3)(4) 75 10 45 2039 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 150
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1414
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
16 47 V/7343-20 T543V476(1)016A(2)(3)(4) 75 10 70 1634 105 3
16 47 V/7343-20 T543V476(1)016A(2)(3)(4) 75 10 80 1529 105 3
16 47 D/7343-31 T543D476(1)016A(2)(3)(4) 75 10 35 2535 105 3
16 47 D/7343-31 T543D476(1)016A(2)(3)(4) 75 10 65 1861 105 3
16 47 D/7343-31 T543D476(1)016A(2)(3)(4) 75 10 70 1793 105 3
16 68 V/7343-20 T543V686(1)016A(2)(3)(4) 109 10 50 1934 105 3
16 68 V/7343-20 T543V686(1)016A(2)(3)(4) 109 10 90 1441 105 3
16 100 V/7343-20 T543V107(1)016A(2)(3)(4) 160 10 50 1934 105 3
16 100 D/7343-31 T543D107(1)016A(2)(3)(4) 160 10 35 2535 105 3
16 100 D/7343-31 T543D107(1)016A(2)(3)(4) 160 10 50 2121 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 15 4058 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 25 3143 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 40 2485 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 80 1757 105 3
16 220 X/7343-43 T543X227(1)016A(2)(3)(4) 352 10 35 2657 105 3
16 220 X/7343-43 T543X227(1)016A(2)(3)(4) 352 10 80 1757 105 3
16 330 X/7343-43 T543X337(1)016A(2)(3)(4) 528 10 25 3143 105 3
16 330 X/7343-43 T543X337(1)016A(2)(3)(4) 528 10 50 2223 105 3
20 22 V/7343-20 T543V226(1)020A(2)(3)(4) 44 10 40 2162 105 3
20 22 V/7343-20 T543V226(1)020A(2)(3)(4) 44 10 45 2039 105 3
20 22 V/7343-20 T543V226(1)020A(2)(3)(4) 44 10 90 1441 105 3
20 22 D/7343-31 T543D226(1)020A(2)(3)(4) 44 10 40 2372 105 3
20 22 D/7343-31 T543D226(1)020A(2)(3)(4) 44 10 45 2236 105 3
20 22 D/7343-31 T543D226(1)020A(2)(3)(4) 44 10 90 1581 105 3
20 33 D/7343-31 T543D336(1)020A(2)(3)(4) 66 10 60 1936 105 3
20 47 V/7343-20 T543V476(1)020A(2)(3)(4) 94 10 55 1844 105 3
20 47 V/7343-20 T543V476(1)020A(2)(3)(4) 94 10 90 1441 105 3
20 47 D/7343-31 T543D476(1)020A(2)(3)(4) 94 10 55 2023 105 3
20 100 X/7343-43 T543X107(1)020A(2)(3)(4) 200 10 35 2657 105 3
20 100 X/7343-43 T543X107(1)020A(2)(3)(4) 200 10 50 2223 105 3
25 15 V/7343-20 T543V156(1)025A(2)(3)(4) 38 10 90 1441 105 3
25 15 D/7343-31 T543D156(1)025A(2)(3)(4) 38 10 60 1936 105 3
25 15 D/7343-31 T543D156(1)025A(2)(3)(4) 38 10 80 1677 105 3
25 22 V/7343-20 T543V226(1)025A(2)(3)(4) 55 10 60 1765 105 3
25 22 V/7343-20 T543V226(1)025A(2)(3)(4) 55 10 90 1441 105 3
25 33 V/7343-20 T543V336(1)025A(2)(3)(4) 83 10 60 1765 105 3
25 33 D/7343-31 T543D336(1)025A(2)(3)(4) 83 10 60 1936 105 3
25 68 X/7343-43 T543X686(1)025A(2)(3)(4) 170 10 35 2657 105 3
25 68 X/7343-43 T543X686(1)025A(2)(3)(4) 170 10 50 2223 105 3
25 100 X/7343-43 T543X107(1)025A(2)(3)(4) 250 10 60 2029 105 3
35 15 V/7343-20 T543V156(1)035A(2)(3)(4) 53 10 100 1367 105 3
35 15 V/7343-20 T543V156(1)035A(2)(3)(4) 53 10 125 1223 105 3
35 15 D/7343-31 T543D156(1)035A(2)(3)(4) 53 10 100 1500 105 3
35 15 D/7343-31 T543D156(1)035A(2)(3)(4) 53 10 125 1342 105 3
35 33 X/7343-43 T543X336(1)035A(2)(3)(4) 116 10 65 1949 105 3
35 47 X/7343-43 T543X476(1)035A(2)(3)(4) 165 10 30 2869 105 3
35 47 X/7343-43 T543X476(1)035A(2)(3)(4) 165 10 60 2029 105 3
50 5.6 D/7343-31 T543D565(1)050A(2)(3)(4) 28 10 70 1793 105 3
50 5.6 D/7343-31 T543D565(1)050A(2)(3)(4) 28 10 90 1581 105 3
50 10 D/7343-31 T543D106(1)050A(2)(3)(4) 50 10 90 1581 105 3
50 12 X/7343-43 T543X126(1)050A(2)(3)(4) 60 10 45 2343 105 3
V
µF
KEMET/EIA
(See below for
part options)
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C 100 kHz
(°C)
Temperature
260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
16 47 V/7343-20 T543V476(1)016A(2)(3)(4) 75 10 70 1634 105 3
16 47 V/7343-20 T543V476(1)016A(2)(3)(4) 75 10 80 1529 105 3
16 47 D/7343-31 T543D476(1)016A(2)(3)(4) 75 10 35 2535 105 3
16 47 D/7343-31 T543D476(1)016A(2)(3)(4) 75 10 65 1861 105 3
16 47 D/7343-31 T543D476(1)016A(2)(3)(4) 75 10 70 1793 105 3
16 68 V/7343-20 T543V686(1)016A(2)(3)(4) 109 10 50 1934 105 3
16 68 V/7343-20 T543V686(1)016A(2)(3)(4) 109 10 90 1441 105 3
16 100 V/7343-20 T543V107(1)016A(2)(3)(4) 160 10 50 1934 105 3
16 100 D/7343-31 T543D107(1)016A(2)(3)(4) 160 10 35 2535 105 3
16 100 D/7343-31 T543D107(1)016A(2)(3)(4) 160 10 50 2121 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 15 4058 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 25 3143 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 40 2485 105 3
16 150 X/7343-43 T543X157(1)016A(2)(3)(4) 240 10 80 1757 105 3
16 220 X/7343-43 T543X227(1)016A(2)(3)(4) 352 10 35 2657 105 3
16 220 X/7343-43 T543X227(1)016A(2)(3)(4) 352 10 80 1757 105 3
16 330 X/7343-43 T543X337(1)016A(2)(3)(4) 528 10 25 3143 105 3
16 330 X/7343-43 T543X337(1)016A(2)(3)(4) 528 10 50 2223 105 3
20 22 V/7343-20 T543V226(1)020A(2)(3)(4) 44 10 40 2162 105 3
20 22 V/7343-20 T543V226(1)020A(2)(3)(4) 44 10 45 2039 105 3
20 22 V/7343-20 T543V226(1)020A(2)(3)(4) 44 10 90 1441 105 3
20 22 D/7343-31 T543D226(1)020A(2)(3)(4) 44 10 40 2372 105 3
20 22 D/7343-31 T543D226(1)020A(2)(3)(4) 44 10 45 2236 105 3
20 22 D/7343-31 T543D226(1)020A(2)(3)(4) 44 10 90 1581 105 3
20 33 D/7343-31 T543D336(1)020A(2)(3)(4) 66 10 60 1936 105 3
20 47 V/7343-20 T543V476(1)020A(2)(3)(4) 94 10 55 1844 105 3
20 47 V/7343-20 T543V476(1)020A(2)(3)(4) 94 10 90 1441 105 3
20 47 D/7343-31 T543D476(1)020A(2)(3)(4) 94 10 55 2023 105 3
20 100 X/7343-43 T543X107(1)020A(2)(3)(4) 200 10 35 2657 105 3
20 100 X/7343-43 T543X107(1)020A(2)(3)(4) 200 10 50 2223 105 3
25 15 V/7343-20 T543V156(1)025A(2)(3)(4) 38 10 90 1441 105 3
25 15 D/7343-31 T543D156(1)025A(2)(3)(4) 38 10 60 1936 105 3
25 15 D/7343-31 T543D156(1)025A(2)(3)(4) 38 10 80 1677 105 3
25 22 V/7343-20 T543V226(1)025A(2)(3)(4) 55 10 60 1765 105 3
25 22 V/7343-20 T543V226(1)025A(2)(3)(4) 55 10 90 1441 105 3
25 33 V/7343-20 T543V336(1)025A(2)(3)(4) 83 10 60 1765 105 3
25 33 D/7343-31 T543D336(1)025A(2)(3)(4) 83 10 60 1936 105 3
25 68 X/7343-43 T543X686(1)025A(2)(3)(4) 170 10 35 2657 105 3
25 68 X/7343-43 T543X686(1)025A(2)(3)(4) 170 10 50 2223 105 3
25 100 X/7343-43 T543X107(1)025A(2)(3)(4) 250 10 60 2029 105 3
35 15 V/7343-20 T543V156(1)035A(2)(3)(4) 53 10 100 1367 105 3
35 15 V/7343-20 T543V156(1)035A(2)(3)(4) 53 10 125 1223 105 3
35 15 D/7343-31 T543D156(1)035A(2)(3)(4) 53 10 100 1500 105 3
35 15 D/7343-31 T543D156(1)035A(2)(3)(4) 53 10 125 1342 105 3
35 33 X/7343-43 T543X336(1)035A(2)(3)(4) 116 10 65 1949 105 3
35 47 X/7343-43 T543X476(1)035A(2)(3)(4) 165 10 30 2869 105 3
35 47 X/7343-43 T543X476(1)035A(2)(3)(4) 165 10 60 2029 105 3
50 5.6 D/7343-31 T543D565(1)050A(2)(3)(4) 28 10 70 1793 105 3
50 5.6 D/7343-31 T543D565(1)050A(2)(3)(4) 28 10 90 1581 105 3
50 10 D/7343-31 T543D106(1)050A(2)(3)(4) 50 10 90 1581 105 3
50 12 X/7343-43 T543X126(1)050A(2)(3)(4) 60 10 45 2343 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 151
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1515
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Rated
Temp
Moisture
Sensitivity
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
50 12 X/7343-43 T543X126(1)050A(2)(3)(4) 60 10 70 1878 105 3
50 18 X/7343-43 T543X186(1)050A(2)(3)(4) 90 10 35 2657 105 3
50 18 X/7343-43 T543X186(1)050A(2)(3)(4) 90 10 70 1878 105 3
50 22 X/7343-43 T543X226(1)050A(2)(3)(4) 110 10 40 2485 105 3
50 22 X/7343-43 T543X226(1)050A(2)(3)(4) 110 10 75 1815 105 3
50 33 X/7343-43 T543X336(1)050A(2)(3)(4) 165 10 40 2485 105 3
50 33 X/7343-43 T543X336(1)050A(2)(3)(4) 165 10 75 1815 105 3
50 10 D/7343-31 T543D106(1)050A(2)(3)(4) 50 10 100 1572 105 3
50 10 D/7343-31 T543D106(1)050A(2)(3)(4) 50 10 120 1435 105 3
50 18 X/7343-43 T543X186(1)050A(2)(3)(4) 90 10 70 1878 105 3
63 4.7 D/7343-31 T543D475(1)063A(2)(3)(4) 30 10 100 1572 105 3
63 4.7 D/7343-31 T543D475(1)063A(2)(3)(4) 30 10 120 1435 105 3
63 10 X/7343-43 T543X106(1)063A(2)(3)(4) 63 10 50 2223 105 3
63 10 X/7343-43 T543X106(1)063A(2)(3)(4) 63 10 75 1815 105 3
63 10 X/7343-43 T543X106(1)063A(2)(3)(4) 63 10 100 1572 105 3
63 10 X/7343-43 T543X106(1)063A(2)(3)(4) 63 10 150 1283 105 3
63 15 X/7343-43 T543X156(1)063A(2)(3)(4) 95 10 50 2223 105 3
VµF KEMET/EIA (See below for
part options)
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 4C 100 kHz (°C) Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number DC Leakage DF ESR
Maximum Allowable
Ripple Current
Rated
Temperature
Moisture
Sensitivity
T543 D156 K035 A H E 100
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
T =
Tantalum
Polymer
Tantalum
COTS
A, B, C, D,
H, L, M, T,
U, V, W,
X, Y
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
063 = 63 V
A = N/A
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
T = 100% Tin
(Sn)
E = None
S = 10 cycles
2C
W = 10 cycles
-55°C and
8C
ESR in
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, H = Solder Plated, T = 100% Tin (Sn). Designates termination  nish.
(3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles -55°C +85°C. Designates surge current option.
(4) To complete KEMET part number, insert the ESR in mΩ, for example 50 mΩ = 050. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 152
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1616
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Derating Guidelines
Voltage Rating
Maximum
Recommended
Steady State
Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 105°C
2.5 V ≤ VR ≤ 10 V 90% of VRVR
12.5 V ≤ VR ≤ 63 V 80% of VRVR
VR= Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C
with +30°C Rise
T
3528-12
105
M
3528-15
120
A
3216-18
112
B
3528-21
127
U
6032-15
135
L
6032-19
150
C
6032-28
165
W
7343-15
180
V
7343-20
187
D
7343-31
225
Y
7343-40
241
X
7343-43
247
H
7360-20
187
I
3216-10
95
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
1
-55 25 45 85 105
% Rated Voltage
Temperature (°C)
Maximum Transient Voltage
Recommended Application Voltage Vr ≤ 10V
Recommended Application Voltage Vr > 10V
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 153
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1717
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
12C*
1% of Rated Voltage
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 154
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1818
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profi le
conditions for convection and IR refl ow refl ect the profi le conditions
of the IPC/JSTD020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three refl ow
passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)10C 150°C
Temperature Maximum (T
Smax
)15C 200°C
Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (T
L
)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Polymer /Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 155
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2061_T543 8/5/2013 1919
KEMET Organic Capacitor (KO-CAP)
T543 Series Polymer Tantalum COTS
Capacitor Marking
(KO)
KEMET
Multi -
Anode
Polymer
Rated
Voltage
107
3 K
230
KO Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1
st
digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 156
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 1
One world. One KEMET
B e n e t s
Extremely low ESR
High energy delivery capability
-55°C to 125°C operating temperature range
Polymer cathode technology
High frequency capacitance retention
Non-ignition failure mode
Capacitance up to 1,500 µF
Voltage: 6.3 – 16 V
100% accelerated steady state aging
100% surge current tested
100% thermal shock
Volumetric effi ciency, very high capacitance
Self-healing mechanism
Taped and reeled per EIA 481–1, EIA standard case sizes
Applications
Typical applications include hold-up, data hardening or vaulting for
enterprise and military SSDs, and high end desktop modems.
Overview
The KEMET Organic Capacitor is a tantalum capacitor with a
Ta anode and Ta2O5 dielectric. A conductive organic polymer
replaces the traditionally used MnO2 as the cathode plate
of the capacitor. This results in very low ESR and improved
capacitance retention at high frequency. The polymer
technology also exhibits a benign failure mode which eliminates
the ignition failures that can occur in standard MnO2 tantalum
types. Ta polymers may be operated at voltages up to 90% of
rated voltage for part types with rated voltages of ≤ 10 volts
and up to 80% of rated voltage for part types > 10 volts with
equivalent or better reliability than traditional MnO2 tantalum
capacitors operated at 50% of rated voltage.
The T545 Series was developed to deliver the highest energy per
CC of any tantalum surface mount device (SMD). This capability
makes this capacitor an excellent solution for designs requiring
high energy at relatively low voltages, such as data hardening or
data vaulting for solid state drives (SSD's). The T545 Series High
Energy Polymer Tantalum Surface Mount Capacitor captures
the best features of multilayer ceramic capacitors (low ESR and
high frequency capacitance retention), aluminum electrolytic
capacitors (higher capacitance and benign failure mode) and
proven solid tantalum technology (volumetric effi ciency, surface
mount capability and extremely long life). In addition, this series is
subjected to 100% thermal shock and voltage aging to insure long
term reliability.
KEMET Organic Capacitor (KO-CAP)
T545 Series High Energy Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 157
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 22
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
T545 H108 M006 A T E055
Capacitor
Class Series Case Size Capacitance Code (pF) Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR
T = Tantalum High Energy
Polymer
Tantalum
D, H ,V ,W,
X, Y
First two digits represent
signi cant fi gures. Third
digit speci es number
of zeros.
M = ±20% 006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A T = 100% Tin (Sn) ESR in mΩ
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 47 μF – 1,500 μF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 6.3 – 16 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 158
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 33
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
Quali cation
Test Condition Characteristics
Endurance 85°C @ rated voltage, 2,000 hours**
Δ C/C Within -20/+10 of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Storage Life 85°C @ 0 volts, 2,000 hours**
Δ C/C
Within -20/+10 of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Humidity 60°C, 90% RH, 1,000 hours
Δ C/C Within -5%/+35% of initial value
DF Within initial limits
DCL Within 5.0 x initial limit
ESR Within 2.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +25º C
+2C -55°C +85°C
Δ C/C I L* +/-20% +/-20%
DF IL IL 1.2 x IL
DCL IL n/a 10 x IL
Surge Voltage 85°C, 1.32 x rated voltage, 1,000 cycles
Δ C/C Within -20/+10 of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C
Within ±10 of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
**Minimum temperature test condition 8C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 159
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 44
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
Electrical Characteristics
ESR vs. Frequency
Capacitance vs. Frequency
0.001
0.01
0.1
1
10
100 1,000 10,000 100,000 1,000,000 10,000,000 100,000,000
Impedance & ESR
Frequency (Hz)
Impedance T545X337M016ATE025
ESR T545X337M016ATE025
100
1,000
10,000
100 1,000 10,000 100,000 1,000,000
Capacitance (µF)
Frequency (Hz)
Capacitance T545X337M016ATE025
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 160
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 55
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
T545 H108 M006 A T E055
Capacitor
Class
Series
Case Size
Capacitance Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR
T = Tantalum
High Energy
Polymer
Tantalum
D, H ,V ,W,
X, Y
First two digits represent
signi cant gures. Third
digit speci es number
of zeros.
M = ±20%
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A
T = 100% Tin (Sn)
ESR in mΩ
Dimensions – Millimeters
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET
EIA
L*
W*
H*
F* ±0.1
±(0.004)
S* ±0.3
±(0.012)
B* ±0.15
(Ref) ±0.006
X (Ref)
P (Ref)
R (Ref)
T (Ref)
A (Min)
G (Ref)
E (Ref)
D
7343-31
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4 (.094)
1.3 (.051)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035)
1.0 (.039)
0.13 (.005)
3.8 (.150)
3.5 (.138)
3.5 (.138)
H
7360-20
7.3 ±0.3
(0.287 ±0.012)
6.0±0.3
(0.236 ±0.012)
2.0 (0.078)
Maximum
4.1 (.161)
1.3 (.051)
n/a
0.10 ± 0.10
(.004 ± .004)
n/a
n/a
0.13 (.005)
3.3 (.130)
3.5 (.138)
3.5 (.138)
V
7343-20
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.0 (0.079)
2.4 (.094)
1.3 (.051)
n/a
0.05 (.002)
n/a
n/a
0.13 (.005)
3.8 (.150)
3.5 (.138)
3.5 (.138)
W
7343-15
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.5 (0.059)
2.4 (.094)
1.3 (.051)
n/a
0.05 (.002)
n/a
n/a
0.13 (.005)
3.8 (.150)
3.5 (.138)
3.5 (.138)
X
7343-43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (.094)
1.3 (.051)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067)
1.0 (.039)
0.13 (.005)
3.8 (.150)
3.5 (.138)
3.5 (.138)
Y
7343-40
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 (0.157)
2.4 (.094)
1.3 (.051)
0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067)
1.0 (.039)
0.13 (.005)
3.8 (.150)
3.5 (.138)
3.5 (.138)
Notes: (Ref) Dimensions provided for reference only. No dimensions are provided for B, P or R because low pro le cases do not have a bevel or a notch.
* MILPRF55365/8 speci ed dimensions
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC Leakage DF ESR
Maximum
Allowable Ripple
Current
MSL Rated
Temperature Energy (mJ)
V
µF
KEMET/EIA
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C
100 kHz
R e o w
Temperature
260°C
(°C)
(½CVa²) - (½CVd²)
Va = Voltage Applied
Vd = Voltage Drop
6.3 1000 H/7360-20 T545H108M006ATE055 630.0 20 55 1850.0 485 11.57
6.3 1500 H/7360-20 T545H158M006ATE035 945.0 20 35 2300.0 485 17.3 6
6.3 1500 H/7360-20 T545H158M006ATE055 945.0 20 55 1850.0 485 17.3 6
6.3 470 W/7343-16 T545W477M006ATE045 296.0 10 45 2300.0 4105 5.44
6.3 470 W/7343-15 T545W477M006ATE055 296.0 10 55 1800.0 4105 5.44
6.3 470 Y/7343-40 T545Y477M006ATE025 296.0 10 25 3100.0 3105 5.44
6.3 470 X/7343-43 T545X477M006ATE006 296.0 10 66700.0 3125 5.44
10 100 W/7343-15 T545W107M010ATE040 100.0 10 40 2100.0 4105 3.60
10 330 Y/7343-40 T545Y337M010ATE035 330.0 10 35 2600.0 3105 11.88
10 330 X/7343-43 T545X337M010ATE006 330.0 10 66700.0 3125 11.88
16 47 W/7343-15 T545W476M016ATE045 75.0 10 45 2000.0 3105 3,64
16 220 X/7343-43 T545X227M016ATE035 352.0 10 35 2700.0 3125 17.03
16 330 X/7343-43 T545X337M016ATE025 528.0 10 25 3300.0 3125 25.55
16 100 V/7343-20 T545V107M016ATE055 160.0 10 55 1850.0 3105 7.74
16 100 D/7343-31 T545D107M016ATE055 160.0 10 55 2050.0 3105 7.74
V
µF
KEMET/EIA
(µA) @ VR, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C
100 kHz
R e o w
Temperature
260°C
(°C)
(½CVa²) - (½CVd²)
Va = Voltage Applied
Vd = Voltage Drop
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC Leakage
DF
ESR
Maximum
Allowable Ripple
Current
MSL
Rated
Temperature
Energy (mJ)
Roll Over for
Order Info.
Dimensions – Millimeters
15
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(0.004)
S* ±0.3
±(0.012)
B* ±0.15
(Ref) ±0.006
X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
D7343-31
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
H7360-20
7.3 ±0.3
(0.287 ±0.012)
6.0±0.3
(0.236 ±0.012)
2.0 (0.078)
Maximum
4.1 (.161) 1.3 (.051) n/a
0.10 ± 0.10
(.004 ± .004)
n/a n/a 0.13 (.005) 3.3 (.130) 3.5 (.138) 3.5 (.138)
V7343-20
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.0 (0.079) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
W7343-15
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.5 (0.059) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343-43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Y7343-40
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 (0.157) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low prole cases do not have a bevel or a notch.
* MILPRF55365/8 specied dimensions
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC Leakage DF ESR
Maximum
Allowable Ripple
Current
MSL Rated
Temperature Energy (mJ)
VµF KEMET/EIA
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C
100 kHz
Reow
Temperature
≤ 260°C
(°C)
CVa²) - (½CVd²)
Va = Voltage Applied
Vd = Voltage Drop
6.3 1000 H/7360-20 T545H108M006ATE055 630.0 20 55 1850.0 485 11.57
6.3 1500 H/7360-20 T545H158M006ATE035 945.0 20 35 2300.0 485 17.3 6
6.3 1500 H/7360-20 T545H158M006ATE055 945.0 20 55 1850.0 485 17.3 6
6.3 470 W/7343-16 T545W477M006ATE045 296.0 10 45 2300.0 4105 5.44
6.3 470 W/7343-15 T545W477M006ATE055 296.0 10 55 1800.0 4105 5.44
6.3 470 Y/7343-40 T545Y477M006ATE025 296.0 10 25 3100.0 3105 5.44
6.3 470 X/7343-43 T545X477M006ATE006 296.0 10 66700.0 3125 5.44
10 100 W/7343-15 T545W107M010ATE040 100.0 10 40 2100.0 4105 3.60
10 330 Y/7343-40 T545Y337M010ATE035 330.0 10 35 2600.0 3105 11.88
10 330 X/7343-43 T545X337M010ATE006 330.0 10 66700.0 3125 11.88
16 47 W/7343-15 T545W476M016ATE045 75.0 10 45 2000.0 3105 3,64
16 220 X/7343-43 T545X227M016ATE035 352.0 10 35 2700.0 3125 17.03
16 330 X/7343-43 T545X337M016ATE025 528.0 10 25 3300.0 3125 25.55
16 100 V/7343-20 T545V107M016ATE055 160.0 10 55 1850.0 3105 7.74
16 100 D/7343-31 T545D107M016ATE055 160.0 10 55 2050.0 3105 7.74
VµF KEMET/EIA
A) @ V
R
, 20°C
Maximum/
5 Minutes
% @ 20°C
120 Hz
Maximum
(mΩ) @ 20°C
100 kHz
Maximum
(mA) 45°C
100 kHz
Reow
Temperature
≤ 260°C
(°C)
CVa²) - (½CVd²)
Va = Voltage Applied
Vd = Voltage Drop
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC Leakage DF ESR
Maximum
Allowable Ripple
Current
MSL Rated
Temperature Energy (mJ)
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 161
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 66
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
Derating Guidelines
Maximum
Transient
Voltage
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
100%
-55 25 45 85 105 125
% Rated Voltage
Temperature (°C)
Recommended Application
Voltage VR ≤ 10 V
Recommended Application
Voltage 16 V
Voltage
Rating
Maximum
Recommended
Steady State Voltage
Maximum
Recommended Transient
Voltage (1 ms – 1 µs)
Maximum
Recommended
Steady State Voltage
Maximum
Recommended Transient
Voltage (1 ms – 1 µs)
-55°C to 105°C 105°C to 125°C
6.3 V ≤ VR ≤ 10 V 90% of VRVR60% of VRVR
VR = 16 V 80% of VRVR54% of VRVR
VR= Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 162
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 77
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 45°C
45° C < T ≤ 85°C
85°C < T ≤ 125°C
1.00
0.70
0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (ohms)
Case Code EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 45°C
with +30°C Rise
T
3528-12
105
M
3528-15
120
A
3216-18
112
B
3528-21
127
U
6032-15
135
L
6032-19
150
C
6032-28
165
W
7343-15
180
V
7343-20
187
D
7343-31
225
Y
7343-40
241
X
7343-43
247
H
7360-20
187
I
3216-10
95
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 163
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 88
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 164
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 99
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)10C 150°C
Temperature Maximum (TSmax
)15C 200°C
Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (T
L
)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Polymer /Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 165
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2060_T545 8/5/2013 1010
KEMET Organic Capacitor (KO-CAP) – T545 Series High Energy Polymer Tantalum
Capacitor Marking
*(KE)
KEMET
Energy
Rated
Voltage
158
6 K
230
KE Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* Polarity stripe will contain KE or KO
* 230 = 30th week of 2012
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 =2011
2 = 2012
3 = 2013
4 =2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classifi ed
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 166
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 1
One world. One KEMET
Bene ts
Polymer cathode technology
High capacitance
Surface mountable
Capacitance values of 66 µF to 4080 µF
Capacitance can be custom specifi ed
Voltage ratings of 3 VDC to 16 VDC
High volumetric ef ciency
Ultra low ESR
Surge capability
Operating temperature range of -55˚C to +125˚C
Laser-marked case
Use up to 90% of rated voltage for part types ≤ 10 volts
Use up to 80% of rated voltage for part types > 10 volts
Applications
Typical applications include decoupling and fi ltering in a variety
of market segments. The T540 Polymer COTS stack devices can
be utilized in military and aerospace applications. Other KEMET
series can be utilized in fi ltering and decoupling applications to
service various market segments.
Overview
The KEMET Tantalum Stack Polymer (TSP) Series is designed
to provide the highest capacitance/voltage ratings in surface
mount confi guration. KEMET's T540 Polymer COTS capacitors
are utilized in stacks of 2,3,4 and 6 components to achieve a
broad range of capacitance and voltage ratings. The T540 COTS
series offers component level surge current testing options and
standard and low ESR options. As with other KEMET Polymer
product, this series may be operated at steady state voltages
up to 90% of rated voltage for part types with rated voltages of ≤
10 volts and up to 80% of rated voltage for part types > 10 volts.
Stacking confi gurations offer this Polymer COTS product with
custom capacitance/voltage solutions and very low ESR options.
Note: Custom stacking solutions are available with other KEMET Tantalum
Surface Mount Series. Please contact KEMET Product Management for
availability.
Tantalum Stack Polymer Surface Mount Capacitors
Tantalum Stack Polymer (TSP) Series
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 167
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 22
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
TSP 2D 207 M010 A H 65 20 D540
Capacitor
Class Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material Surge ESR C-Spec 2
T =
Tantalum
Stacks
Polymer
Cathode
2B, 3B,
4B, 6B,
2D, 3D,
4D, 6D
First two digits
represent
signifi cant
gures. Third digit
specifi es number
of zeros.
M = ±20% 003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A H = Standard
Solder
Coated
(SnPb 5% Pb
minimum)
65 = No Surge
66 = 10 cycles
@ 25°C
67 = 10 cycles
-55°C and 85°C
10 = ESR -
Standard
20 = ESR-
Low
Designates
discrete
component
series.
D540 =
T540
Note: These TSP Stacks are speci c to T540 COTS.
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 66 – 4080 μF @ 120 Hz/25° C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 3 – 16 V
DF (120 Hz) Refer to Part Number Electrical Specifi cation Table
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 168
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 33
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Quali cation
Test
Condition
Characteristics
Endurance 105°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Δ C/C Within -20/+10% of initial value
DF ≤ initial limit
DCL 1.25 x IL @125° C
ESR 2 x initial limit
Thermal Shock KEMET specifi ed test, mounted, -55C° to 125° C, 5 cycles
Δ C/C
Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Surge Voltage 85° C, 1.15 x rated voltage 1,000 cycles
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Surge Voltage 125°C, 0.77 x rated voltage 1,000 cycles
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Vibration MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10 of initial value
DF Within initial limits
DCL Within initial limits
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 169
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 44
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Dimensions – Millimeters (Inches)
Metric will govern
TSP2
KEMET 2 Component Stack Dimensions
Case
Code
L W H W2 H2 P
2B
4.1 ± 0.38
(.162 ± .015)
3.1 ± 0.2
(.122 ± .008)
4.3 ± 0.38
(.170 ± .015)
2.3 ± 0.2
(.090 ± .008)
3.1 ± 0.38
(.124 ± .015)
0.76 ± 0.38
(.030 ± .015)
2D
8.0 ± 0.38
(.315 ± .015)
4.4 ± 0.2
(.174 ± .008)
6.2 ± 0.38
(.245 ± .015)
3.0 ± 0.2
(.120 ± .008)
4.8 ± 0.38
(.192 ± .015)
1.9 ± 0.38
(.075 ± .015)
TSP3
KEMET 3 Component Stack Dimensions
Case
Code
L W H W2 H2 P
3B
4.1 ± 0.38
(.162 ± .015)
3.1 ± 0.2
(.122 ± .008)
6.3 ± 0.38
(.248 ± .015)
2.3 ± 0.2
(.090 ± .008)
5.3 ± 0.38
(.210 ± .015)
0.76 ± 0.38
(.030 ± .015)
3D
8.0 ± 0.38
(.315 ± .015)
4.4 ± 0.2
(.174 ± .008)
9.2 ± 0.38
(365 ± .015)
3.0 ± 0.2
(.120 ± .008)
7.7 ± 0.38
(.304 ± .015)
1.9 ± 0.38
(.075 ± .015)
TSP4
KEMET 4 Component Stack Dimensions
Case
Code
L W H W2 H2 P
4B
4.1 ± 0.38
(.162 ± .015)
6.1 ± 0.2
(.242 ± .008)
4.3 ± 0.38
(.170 ± .015)
5.3 ± 0.2
(.210 ± .008)
3.1 ± 0.38
(.124 ± .015)
0.76 ± 0.38
(.030 ± .015)
4D
8.0 ± 0.38
(.315 ± .015)
8.9 ± 0.2
(.350 ± .008)
6.2 ± 0.38
(245 ± .015)
7.4 ± 0.2
(.292 ± .008)
4.8 ± 0.38
(.192 ± .015)
1.9 ± 0.38
(.075 ± .015)
TSP6
KEMET 6 Component Stack Dimensions
Case
Code
L W H W2 H2 P
6B
4.1 ± 0.38
(.162 ± .015)
6.1 ± 0.2
(.242 ± .008)
6.3 ± 0.38
(.248 ± .015)
5.3 ± 0.2
(.210 ± .008)
5.3 ± 0.38
(.210 ± .015)
0.76 ± 0.38
(.030 ± .015)
6D
8.0 ± 0.38
(.315 ± .015)
8.9 ± 0.2
(.350 ± .008)
9.2 ± 0.38
(365 ± .015)
7.4 ± 0.2
(.292 ± .008)
7.7 ± 0.38
(.304 ± .015)
1.9 ± 0.38
(.075 ± .015)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 170
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 55
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Capacitance and Rated Voltage Chart
Capacitance Rated Voltage
µF Code 3 4 6.3 10 16
66 666 2B
94 946 2D
99 996 3B
132 137 4B
136 137 2B
141 147 3D
188 197 4D
198 207 6B
200 207 2B 2D
204 207 3B
272 277 4B
282 287 6D
300 307 3B 2D
400 407 4B 4D
408 407 6B
440 447 2D 2D
450 457 3B
600 607 4B 6B
660 667 2D 2D 3D
880 887 4D 4D
900 907 6B 6D
940 947 2D
990 997 3D
1320 138 4D 6D
1360 148 2D
1410 148 3D
1880 198 4D
1980 208 6D
2040 208 3D
2720 278 4D
2820 288 6D
4080 418 6D
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 171
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 66
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Table 1A – TSP2 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
4200 2B TSP2B207M004AH(1)(2)D540 80 840 N/A
6.3 130 2B TSP2B137M006AH(1)(2)D540 86 840 N/A
10 66 2B TSP2B666M010AH(1)(2)D540 66 840 N/A
3660 2D TSP2D667M003AH(1)(2)D540 198 10 13 N/A
31400 2D TSP2D148M003AH(1)(2)D540 408 10 13 N/A
4440 2D TSP2D447M004AH(1)(2)D540 176 10 13 N/A
4940 2D TSP2D947M004AH(1)(2)D540 376 10 20 13
6.3 660 2D TSP2D667M006AH(1)(2)D540 416 10 20 13
10 200 2D TSP2D207M010AH(1)(2)D540 200 10 28 13
10 300 2D TSP2D307M010AH(1)(2)D540 300 10 28 13
10 440 2D TSP2D447M010AH(1)(2)D540 440 10 13 N/A
16 94 2D TSP2D946M016AH(1)(2)D540 152 10 33 18
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard ESR
Low ESR
Table 1B – TSP3 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
3450 3B TSP3B457M003AH(1)(2)D540 135 827 N/A
4300 3B TSP3B307M004AH(1)(2)D540 120 827 N/A
6.3 200 3B TSP3B207M006AH(1)(2)D540 129 827 N/A
10 99 3B TSP3B996M010AH(1)(2)D540 99 827 N/A
32000 3D TSP3D208M003AH(1)(2)D540 612 10 9N/A
41400 3D TSP3D148M004AH(1)(2)D540 564 10 14 9
6.3 990 3D TSP3D997M006AH(1)(2)D540 624 10 14 9
10 660 3D TSP3D667M010AH(1)(2)D540 660 10 9N/A
16 140 3D TSP3D147M016AH(1)(2)D540 226 10 22 12
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard ESR
Low ESR
(1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25°C, 67 = 10 cycles -55°C +85°C. Designates surge current option.
(2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
TSP 2D 207 M010 A H 65 20 D540
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
C-Spec 2
T =
Tantalum
Stacks
Polymer
Cathode
2B, 3B,
4B, 6B,
2D, 3D,
4D, 6D
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A
H = Standard
Solder
Coated
(SnPb 5% Pb
minimum)
65 = No Surge
66 = 10 cycles
@ 25°C
67 = 10 cycles
-55°C and 85°C
10 = ESR -
Standard
20 = ESR-
Low
Designates
discrete
component
series.
D540 =
T540
Table 1A – TSP2 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
4200 2B TSP2B207M004AH(1)(2)D540 80 840 N/A
6.3 130 2B TSP2B137M006AH(1)(2)D540 86 840 N/A
10 66 2B TSP2B666M010AH(1)(2)D540 66 840 N/A
3660 2D TSP2D667M003AH(1)(2)D540 198 10 13 N/A
31400 2D TSP2D148M003AH(1)(2)D540 408 10 13 N/A
4440 2D TSP2D447M004AH(1)(2)D540 176 10 13 N/A
4940 2D TSP2D947M004AH(1)(2)D540 376 10 20 13
6.3 660 2D TSP2D667M006AH(1)(2)D540 416 10 20 13
10 200 2D TSP2D207M010AH(1)(2)D540 200 10 28 13
10 300 2D TSP2D307M010AH(1)(2)D540 300 10 28 13
10 440 2D TSP2D447M010AH(1)(2)D540 440 10 13 N/A
16 94 2D TSP2D946M016AH(1)(2)D540 152 10 33 18
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard ESR Low ESR
Table 1B – TSP3 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
3450 3B TSP3B457M003AH(1)(2)D540 135 827 N/A
4300 3B TSP3B307M004AH(1)(2)D540 120 827 N/A
6.3 200 3B TSP3B207M006AH(1)(2)D540 129 827 N/A
10 99 3B TSP3B996M010AH(1)(2)D540 99 827 N/A
32000 3D TSP3D208M003AH(1)(2)D540 612 10 9N/A
41400 3D TSP3D148M004AH(1)(2)D540 564 10 14 9
6.3 990 3D TSP3D997M006AH(1)(2)D540 624 10 14 9
10 660 3D TSP3D667M010AH(1)(2)D540 660 10 9N/A
16 140 3D TSP3D147M016AH(1)(2)D540 226 10 22 12
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard ESR Low ESR
(1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25°C, 67 = 10 cycles -55°C +85°C. Designates surge current option.
(2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 172
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 77
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Table 1C – TSP4 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
3600 4B TSP4B607M003AH(1)(2)D540 180 820 N/A
4400 4B TSP4B407M004AH(1)(2)D540 160 820 N/A
6.3 270 4B TSP4B277M006AH(1)(2)D540 172 820 N/A
10 130 4B TSP4B137M010AH(1)(2)D540 132 820 N/A
32700 4D TSP4D278M003AH(1)(2)D540 816 10 7N/A
4880 4D TSP4D887M004AH(1)(2)D540 352 10 7N/A
41900 4D TSP4D198M004AH(1)(2)D540 752 10 10 7
6.3 1300 4D TSP4D138M006AH(1)(2)D540 832 10 10 7
10 400 4D TSP4D407M010AH(1)(2)D540 400 10 14 7
10 880 4D TSP4D887M010AH(1)(2)D540 880 10 7N/A
16 190 4D TSP4D197M016AH(1)(2)D540 301 10 17 9
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard ESR
Low ESR
Table 1D – TSP6 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
3900 6B TSP6B907M003AH(1)(2)D540 270 814 N/A
4600 6B TSP6B607M004AH(1)(2)D540 240 814 N/A
6.3 400 6B TSP6B407M006AH(1)(2)D540 258 814 N/A
10 200 6B TSP6B207M010AH(1)(2)D540 198 814 N/A
34100 6D TSP6D418M003AH(1)(2)D540 1224 10 5N/A
42800 6D TSP6D288M004AH(1)(2)D540 1128 10 75
6.3 2000 6D TSP6D208M006AH(1)(2)D540 1248 10 75
10 900 6D TSP6D907M010AH(1)(2)D540 900 10 10 5
10 1300 6D TSP6D138M010AH(1)(2)D540 1320 10 5N/A
16 280 6D TSP6D287M016AH(1)(2)D540 452 10 11 6
V
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
Standard ESR
Low ESR
(1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25°C, 67 = 10 cycles -55°C +85°C. Designates surge current option.
(2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
TSP 2D 207 M010 A H 65 20 D540
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
Surge
ESR
C-Spec 2
T =
Tantalum
Stacks
Polymer
Cathode
2B, 3B,
4B, 6B,
2D, 3D,
4D, 6D
First two digits
represent
signi cant
gures. Third digit
speci es number
of zeros.
M = ±20%
003 = 3 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
A = N/A
H = Standard
Solder
Coated
(SnPb 5% Pb
minimum)
65 = No Surge
66 = 10 cycles
@ 25°C
67 = 10 cycles
-55°C and 85°C
10 = ESR -
Standard
20 = ESR-
Low
Designates
discrete
component
series.
D540 =
T540
Table 1C – TSP4 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
3600 4B TSP4B607M003AH(1)(2)D540 180 820 N/A
4400 4B TSP4B407M004AH(1)(2)D540 160 820 N/A
6.3 270 4B TSP4B277M006AH(1)(2)D540 172 820 N/A
10 130 4B TSP4B137M010AH(1)(2)D540 132 820 N/A
32700 4D TSP4D278M003AH(1)(2)D540 816 10 7N/A
4880 4D TSP4D887M004AH(1)(2)D540 352 10 7N/A
41900 4D TSP4D198M004AH(1)(2)D540 752 10 10 7
6.3 1300 4D TSP4D138M006AH(1)(2)D540 832 10 10 7
10 400 4D TSP4D407M010AH(1)(2)D540 400 10 14 7
10 880 4D TSP4D887M010AH(1)(2)D540 880 10 7N/A
16 190 4D TSP4D197M016AH(1)(2)D540 301 10 17 9
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard ESR Low ESR
Table 1D – TSP6 Ratings & Part Number Reference
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard
ESR Low ESR
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
3900 6B TSP6B907M003AH(1)(2)D540 270 814 N/A
4600 6B TSP6B607M004AH(1)(2)D540 240 814 N/A
6.3 400 6B TSP6B407M006AH(1)(2)D540 258 814 N/A
10 200 6B TSP6B207M010AH(1)(2)D540 198 814 N/A
34100 6D TSP6D418M003AH(1)(2)D540 1224 10 5N/A
42800 6D TSP6D288M004AH(1)(2)D540 1128 10 75
6.3 2000 6D TSP6D208M006AH(1)(2)D540 1248 10 75
10 900 6D TSP6D907M010AH(1)(2)D540 900 10 10 5
10 1300 6D TSP6D138M010AH(1)(2)D540 1320 10 5N/A
16 280 6D TSP6D287M016AH(1)(2)D540 452 10 11 6
VµF KEMET/EIA
(See below for
part options)
µA @ +2C
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ +25ºC
100 kHz Max
mΩ +25ºC
100 kHz Max
Rated Voltage Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF Standard ESR Low ESR
(1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25°C, 67 = 10 cycles -55°C +85°C. Designates surge current option.
(2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 173
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 88
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Derating Guidelines
Voltage Rating
Maximum
Recommended
Steady State Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 105°C
10 V ≤ VR90% of VRVR
VR > 10 80% of VRVR
VR = Rated Voltage
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identifi ed on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
12C
1% of Rated Voltage
50%
55%
60%
65%
70%
75%
80%
85%
90%
95%
100%
-55 25 45 85 105 125
% Rated Voltage
Temperature (°C)
Maximum Transient Voltage
Recommended Application Voltage V
r
10V
Recommended Application Voltage V
r
> 10V
67%
60%
53%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 174
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 99
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Table 2 – Land Dimensions/Courtyard
KEMET
Density Level A:
Maximum (Most) Land Protrusion
(mm)
Density Level B:
Median (Nominal) Land Protrusion
(mm)
Density Level C:
Minimum (Least) Land Protrusion
(mm)
Case
L
W
S
V1
V2
L
W
S
V1
V2
L
W
S
V1
V2
TSP2B
2.34
2.54
1.41
7.10
4.30
1.94
2.42
1.61
6.00
3.80
1.56
2.32
1.77
5.14
3.54
TSP2D
3.48
3.24
3.03
11.00
5.60
3.08
3.12
3.23
9.90
5.10
2.70
3.02
3.39
9.04
4.84
TSP3B
2.34
2.54
1.41
7.10
4.30
1.94
2.42
1.61
6.00
3.80
1.56
2.32
1.77
5.14
3.54
TSP3D
3.48
3.24
3.03
11.00
5.60
3.08
3.12
3.23
9.90
5.10
2.70
3.02
3.39
9.04
4.84
TSP4B
2.34
5.54
1.41
7.10
7.30
1.94
5.42
1.61
6.00
6.80
1.56
5.32
1.77
5.14
6.54
TSP4D
3.48
7.64
3.03
11.00
10.10
3.08
7.52
3.23
9.90
9.60
2.70
7.42
3.39
9.04
9.34
TSP6B
2.34
5.54
1.41
7.10
7.30
1.94
5.42
1.61
6.00
6.80
1.56
5.32
1.77
5.14
6.54
TSP6D
3.48
7.64
3.03
11.00
10.10
3.08
7.52
3.23
9.90
9.60
2.70
7.42
3.39
9.04
9.34
Density Level A: For low-density Product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC-7351).
¹ Height of these chips may create problems in wave soldering.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 175
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2029_TSP 8/5/2013 1010
Tantalum Stack Polymer Surface Mount Capacitors – Tantalum Stack Polymer (TSP) Seriesr
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
Reference
Name
Material
ALeadframe BeCu Alloy 190
B Leadframe Attach High Temp Solder
CLead Termination Solder Coated Alloy 752
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 176
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 1
One world. One KEMET
Bene ts
ESR: 6 mΩ to 70 mΩ
Voltage: 2 V to 16 V
Capacitance: 6.8 µF to 470 µF
Operating Temperature: -5C to 12C
Polymer cathode technology
High frequency capacitance retention
Non-ignition failure mode
100% accelerated steady state aging
100% surge current tested
Volumetric effi ciency
Self-healing mechanism
EIA standard case sizes
Applications
Typical applications include DC/DC converters, notebook PCs,
telecommunications, displays, and industrial applications.
Overview
The KEMET Aluminum Organic Capacitor (AO-CAP) is a solid
state aluminum capacitor with an aluminum oxide dielectric and
conductive polymer cathode. The use of the conductive polymer
cathode results in very low ESR and improved capacitance
retention at high frequency. AO-CAP's may be operated at
steady state voltages up to 100% of rated voltage (no derating)
with equivalent or better reliability than tantalum capacitors
operating at the recommended derated voltage.
The A700 Series AO-CAP offers the same advantages as the
polymer tantalum capacitors but also has the added advantages
of 125°C performance capability, higher ripple current handling
capability and a lower ESR range. Packaged with multiple anodes/
elements to reduce the depth that the signal must penetrate, this
parallel arrangement reduces the ESR further still to achieve
lower ESR than other types of surface mount capacitors with
similar capacitance ranges. With reduced ESR, the enhanced
capacitance retention at higher frequencies provides the
lowest total capacitance and an economical solution for power
applications.
Aluminum Organic Capacitor (AO-CAP)
A700 Series Polymer Aluminum
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 177
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 22
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
SPICE
For a detailed analysis of specifi c part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
Ordering Information
A700 V476 M006 A T E018
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
A =
Aluminum
700 =
Aluminum
Polymer
D, V, W, X First two digits
represent signifi cant
gures. Third digit
specifi es number of
zeros.
M = ±20% 002 = 2 V
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
A = N/A T = 100%
Matte Tin
(Sn) Plated
E = ESR
Last three
digits specify
ESR in mΩ
(018 = 18 mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 6.8 – 470 µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 2 – 16 V
DF (120 Hz) 6%
ESR (100 kHz) Refer to Part Number Electrical Specifi cation Table
Leakage Current
≤ 4 V Rating: ≤ 0.06 CV (µA) at rated voltage after 5 minutes
> 4 V Rating: ≤ 0.04 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 178
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 33
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
Quali cation
Test
Condition
Characteristics
Endurance 125°C @ rated voltage, 2,000 hours
Δ C/C Within ±10% of initial value
DF ≤ initial limit
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Storage Life 125°C @ 0 volts, 2,000 hours
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Humidity 60°C, 90% RH, 1,000 hours, rated voltage 60°C, 90% RH,
500 hours, No Load
Δ C/C Within -5%/+30% of initial value
DF ≤ initial limit
DCL Within 5.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +8C, +125ºC, +25ºC
+2C -55°C +85°C +125°C
Δ C/C IL* ±15% ±15% ±20%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 125°C, 1.32 x rated voltage, 33 Ω Resistance, 1,000 cycles
Δ C/C
Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 179
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 44
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
Electrical Characteristics
100 1,000 10,000 100,000 1,000,000 10,000,000
A700V686M006ATE018
A700D157M006ATE015
A700X187M006ATE010
Capacitance (µF)
Frequency (Hz)
1
10
100
Capacitance vs. Frequency
ESR vs. Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
0.001
A700V686M006ATE018_Imp
A700D157M006ATE015_Imp
A700X187M006ATE010_Imp
A700V686M006ATE018_ESR
A700D157M006ATE015_ESR
A700X187M006ATE010_ESR
Dimensions – Millimeters (Inches)
Metric will govern
Case Size
Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
D7343-31
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.8 ±0.3
(0.098 ±0.012)
2.4 (.094) 1.3 (.051)
V7343-20
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.0 (0.079)
Maximum
2.4 (.094) 1.3 (.051)
W7343-15
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.5 (0.059)
Maximum
2.4 (.094) 1.3 (.051)
X7343-43
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4 (.094) 1.3 (.051)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 180
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 55
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
A700 V476 M006 A T E018
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
A =
Aluminum
700 =
Aluminum
Polymer
D, V, W, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
002 = 2 V
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
A = N/A
T = 100%
Matte Tin
(Sn) Plated
E = ESR
Last three
digits specify
ESR in mΩ
(018 = 18 mΩ)
Blank = 7" Reel
7280 = 13" Reel
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
2100 V/7343-20 A700V107M002ATE016 12 616 4100 3125
2100 V/7343-20 A700V107M002ATE018 12 618 3900 3125
2100 V/7343-20 A700V107M002ATE025 12 625 3300 3125
2100 V/7343-20 A700V107M002ATE028 12 628 3100 3125
2150 V/7343-20 A700V157M002ATE015 18 615 4200 3 125
2150 V/7343-20 A700V157M002ATE018 18 618 3900 3125
2150 V/7343-20 A700V157M002ATE025 18 625 3300 3125
2150 V/7343-20 A700V157M002ATE028 18 628 3100 3125
2180 D/7343-31 A700D187M002ATE015 22 615 4100 3125
2180 D/7343-31 A700D187M002ATE018 22 618 3700 3125
2220 V/7343-20 A700V227M002ATE009 26 6 9 5500 3125
2220 V/7343-20 A700V227M002ATE015 26 615 4200 3 125
2220 V/7343-20 A700V227M002ATE018 26 618 3900 3125
2220 D/7343-31 A700D227M002ATE009 26 6 9 5300 3125
2220 D/7343-31 A700D227M002ATE015 26 615 4100 3125
2220 D/7343-31 A700D227M002ATE018 26 618 3700 3125
2270 D/7343-31 A700D277M002ATE012 32 612 4600 3125
2270 X/7343-43 A700X277M002ATE010 32 610 4700 3125
2270 X/7343-43 A700X277M002ATE012 32 612 4300 3125
2270 X/7343-43 A700X277M002ATE015 32 615 3900 3125
2330 D/7343-31 A700D337M002ATE007 40 676000 3125
2330 D/7343-31 A700D337M002ATE009 40 6 9 5300 3125
2330 D/7343-31 A700D337M002ATE012 40 612 4600 3125
2330 X/7343-43 A700X337M002ATE010 40 610 4700 3125
2330 X/7343-43 A700X337M002ATE015 40 615 3900 3125
2390 X/7343-43 A700X397M002ATE010 47 610 4700 3125
2390 X/7343-43 A700X397M002ATE015 47 615 3900 3125
2470 D/7343-31 A700D477M002ATE005 56 6 5 7100 3125
2470 D/7343-31 A700D477M002ATE006 56 6 6 6500 3125
2470 X/7343-43 A700X477M002ATE005 56 6 5 6700 3125
2470 X/7343-43 A700X477M002ATE007 56 675700 3125
2470 X/7343-43 A700X477M002ATE010 56 610 4700 3125
2470 X/7343-43 A700X477M002ATE015 56 615 3900 3125
2560 X/7343-43 A700X567M002ATE005 67 6 5 6700 3125
2.5 68 V/7343-20 A700V686M2R5ATE020 10 620 3700 3125
2.5 68 V/7343-20 A700V686M2R5ATE028 10 628 3100 3125
2.5 82 V/7343-20 A700V826M2R5ATE018 12 618 3900 3125
2.5 82 V/7343-20 A700V826M2R5ATE025 12 625 3300 3125
2.5 82 V/7343-20 A700V826M2R5ATE028 12 628 3100 3125
2.5 100 D/7343-31 A700D107M2R5ATE018 15 618 3700 3125
2.5 100 D/7343-31 A700D107M2R5ATE025 15 625 3200 3125
2.5 100 D/7343-31 A700D107M2R5ATE028 15 628 3000 3125
2.5 120 D/7343-31 A700D127M2R5ATE015 18 615 4100 3125
2.5 120 D/7343-31 A700D127M2R5ATE018 18 618 3700 3125
2.5 150 D/7343-31 A700D157M2R5ATE015 23 615 4100 3125
2.5 150 D/7343-31 A700D157M2R5ATE018 23 618 3700 3125
2.5 180 D/7343-31 A700D187M2R5ATE015 27 615 4100 3125
2.5 180 D/7343-31 A700D187M2R5ATE018 27 618 3700 3125
2.5 180 X/7343-43 A700X187M2R5ATE010 27 610 4700 3125
2.5 180 X/7343-43 A700X187M2R5ATE015 27 615 3900 3125
2.5 180 X/7343-43 A700X187M2R5ATE018 27 618 3500 3125
2.5 220 X/7343-43 A700X227M2R5ATE009 33 6 9 5000 3125
2.5 220 X/7343-43 A700X227M2R5ATE010 33 610 4700 3125
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
2100 V/7343-20 A700V107M002ATE016 12 616 4100 3125
2100 V/7343-20 A700V107M002ATE018 12 618 3900 3125
2100 V/7343-20 A700V107M002ATE025 12 625 3300 3125
2100 V/7343-20 A700V107M002ATE028 12 628 3100 3125
2150 V/7343-20 A700V157M002ATE015 18 615 4200 3 125
2150 V/7343-20 A700V157M002ATE018 18 618 3900 3125
2150 V/7343-20 A700V157M002ATE025 18 625 3300 3125
2150 V/7343-20 A700V157M002ATE028 18 628 3100 3125
2180 D/7343-31 A700D187M002ATE015 22 615 4100 3125
2180 D/7343-31 A700D187M002ATE018 22 618 3700 3125
2220 V/7343-20 A700V227M002ATE009 26 6 9 5500 3125
2220 V/7343-20 A700V227M002ATE015 26 615 4200 3 125
2220 V/7343-20 A700V227M002ATE018 26 618 3900 3125
2220 D/7343-31 A700D227M002ATE009 26 6 9 5300 3125
2220 D/7343-31 A700D227M002ATE015 26 615 4100 3125
2220 D/7343-31 A700D227M002ATE018 26 618 3700 3125
2270 D/7343-31 A700D277M002ATE012 32 612 4600 3125
2270 X/7343-43 A700X277M002ATE010 32 610 4700 3125
2270 X/7343-43 A700X277M002ATE012 32 612 4300 3125
2270 X/7343-43 A700X277M002ATE015 32 615 3900 3125
2330 D/7343-31 A700D337M002ATE007 40 676000 3125
2330 D/7343-31 A700D337M002ATE009 40 6 9 5300 3125
2330 D/7343-31 A700D337M002ATE012 40 612 4600 3125
2330 X/7343-43 A700X337M002ATE010 40 610 4700 3125
2330 X/7343-43 A700X337M002ATE015 40 615 3900 3125
2390 X/7343-43 A700X397M002ATE010 47 610 4700 3125
2390 X/7343-43 A700X397M002ATE015 47 615 3900 3125
2470 D/7343-31 A700D477M002ATE005 56 6 5 7100 3125
2470 D/7343-31 A700D477M002ATE006 56 6 6 6500 3125
2470 X/7343-43 A700X477M002ATE005 56 6 5 6700 3125
2470 X/7343-43 A700X477M002ATE007 56 675700 3125
2470 X/7343-43 A700X477M002ATE010 56 610 4700 3125
2470 X/7343-43 A700X477M002ATE015 56 615 3900 3125
2560 X/7343-43 A700X567M002ATE005 67 6 5 6700 3125
2.5 68 V/7343-20 A700V686M2R5ATE020 10 620 3700 3125
2.5 68 V/7343-20 A700V686M2R5ATE028 10 628 3100 3125
2.5 82 V/7343-20 A700V826M2R5ATE018 12 618 3900 3125
2.5 82 V/7343-20 A700V826M2R5ATE025 12 625 3300 3125
2.5 82 V/7343-20 A700V826M2R5ATE028 12 628 3100 3125
2.5 100 D/7343-31 A700D107M2R5ATE018 15 618 3700 3125
2.5 100 D/7343-31 A700D107M2R5ATE025 15 625 3200 3125
2.5 100 D/7343-31 A700D107M2R5ATE028 15 628 3000 3125
2.5 120 D/7343-31 A700D127M2R5ATE015 18 615 4100 3125
2.5 120 D/7343-31 A700D127M2R5ATE018 18 618 3700 3125
2.5 150 D/7343-31 A700D157M2R5ATE015 23 615 4100 3125
2.5 150 D/7343-31 A700D157M2R5ATE018 23 618 3700 3125
2.5 180 D/7343-31 A700D187M2R5ATE015 27 615 4100 3125
2.5 180 D/7343-31 A700D187M2R5ATE018 27 618 3700 3125
2.5 180 X/7343-43 A700X187M2R5ATE010 27 610 4700 3125
2.5 180 X/7343-43 A700X187M2R5ATE015 27 615 3900 3125
2.5 180 X/7343-43 A700X187M2R5ATE018 27 618 3500 3125
2.5 220 X/7343-43 A700X227M2R5ATE009 33 6 9 5000 3125
2.5 220 X/7343-43 A700X227M2R5ATE010 33 610 4700 3125
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 181
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 66
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
A700 V476 M006 A T E018
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
A =
Aluminum
700 =
Aluminum
Polymer
D, V, W, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
002 = 2 V
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
A = N/A
T = 100%
Matte Tin
(Sn) Plated
E = ESR
Last three
digits specify
ESR in mΩ
(018 = 18 mΩ)
Blank = 7" Reel
7280 = 13" Reel
Roll Over for
Order Info.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
2.5 220 X/7343-43 A700X227M2R5ATE015 33 615 3900 3125
2.5 330 X/7343-43 A700X337M2R5ATE010 50 610 4700 3125
2.5 330 X/7343-43 A700X337M2R5ATE015 50 615 3900 3125
468 V/7343-20 A700V686M004ATE020 16 620 3700 3125
468 V/7343-20 A700V686M004ATE028 16 628 3100 3125
482 V/7343-20 A700V826M004ATE016 20 616 4100 3125
482 V/7343-20 A700V826M004ATE018 20 618 3900 3125
482 V/7343-20 A700V826M004ATE025 20 625 3300 3125
482 V/7343-20 A700V826M004ATE028 20 628 3100 3125
4100 D/7343-31 A700D107M004ATE018 24 618 3700 3125
4100 D/7343-31 A700D107M004ATE025 24 625 3200 3125
4100 D/7343-31 A700D107M004ATE028 24 628 3000 3125
4100 V/7343-20 A700V107M004ATE025 24 625 3300 3125
4100 V/7343-20 A700V107M004ATE028 24 628 3100 3125
4120 D/7343-31 A700D127M004ATE015 29 615 4100 3125
4120 D/7343-31 A700D127M004ATE018 29 618 3700 3125
4150 D/7343-31 A700D157M004ATE015 36 615 4100 3125
4150 D/7343-31 A700D157M004ATE018 36 618 3700 3125
4150 V/7343-20 A700V157M004ATE016 36 616 4100 3125
4180 D/7343-31 A700D187M004ATE012 43 612 4600 3125
4180 D/7343-31 A700D187M004ATE015 43 615 4100 3125
4180 D/7343-31 A700D187M004ATE018 43 618 3700 3125
4180 X/7343-43 A700X187M004ATE010 43 610 4700 3125
4180 X/7343-43 A700X187M004ATE015 43 615 3900 3125
4180 X/7343-43 A700X187M004ATE018 43 618 3500 3125
4220 D/7343-31 A700D227M004ATE009 53 6 9 5300 3125
4220 D/7343-31 A700D227M004ATE010 53 610 5000 3125
4220 D/7343-31 A700D227M004ATE015 53 615 4100 3125
4220 X/7343-43 A700X227M004ATE009 53 6 9 5000 3125
4220 X/7343-43 A700X227M004ATE010 53 610 4700 3125
4220 X/7343-43 A700X227M004ATE015 53 615 3900 3125
4270 X/7343-43 A700X277M004ATE010 65 610 4700 3125
4270 X/7343-43 A700X277M004ATE015 65 615 3900 3125
4330 X/7343-43 A700X337M004ATE008 79 6 8 5300 3125
4330 X/7343-43 A700X337M004ATE010 79 610 4700 3125
4330 X/7343-43 A700X337M004ATE015 79 615 3900 3125
6.3 10 V/7343-20 A700V106M006ATE055 3 6 55 2200 3125
6.3 22 V/7343-20 A700V226M006ATE028 6 6 28 3100 3125
6.3 22 V/7343-20 A700V226M006ATE045 6 6 45 2400 3125
6.3 33 V/7343-20 A700V336M006ATE018 8 6 18 3900 3125
6.3 33 V/7343-20 A700V336M006ATE025 8 6 25 3300 3125
6.3 33 V/7343-20 A700V336M006ATE028 8 6 28 3100 3125
6.3 47 V/7343-20 A700V476M006ATE018 12 618 3900 3125
6.3 47 V/7343-20 A700V476M006ATE025 12 625 3300 3125
6.3 47 V/7343-20 A700V476M006ATE028 12 628 3100 3125
6.3 56 V/7343-20 A700V566M006ATE018 14 618 3900 3125
6.3 56 V/7343-20 A700V566M006ATE025 14 625 3300 3125
6.3 56 V/7343-20 A700V566M006ATE028 14 628 3100 3125
6.3 68 V/7343-20 A700V686M006ATE015 17 615 4200 3 125
6.3 68 V/7343-20 A700V686M006ATE018 17 618 3900 3125
6.3 68 V/7343-20 A700V686M006ATE025 17 625 3300 3125
6.3 68 V/7343-20 A700V686M006ATE028 17 628 3100 3125
6.3 82 V/7343-20 A700V826M006ATE018 21 618 3900 3125
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
2.5 220 X/7343-43 A700X227M2R5ATE015 33 615 3900 3125
2.5 330 X/7343-43 A700X337M2R5ATE010 50 610 4700 3125
2.5 330 X/7343-43 A700X337M2R5ATE015 50 615 3900 3125
468 V/7343-20 A700V686M004ATE020 16 620 3700 3125
468 V/7343-20 A700V686M004ATE028 16 628 3100 3125
482 V/7343-20 A700V826M004ATE016 20 616 4100 3125
482 V/7343-20 A700V826M004ATE018 20 618 3900 3125
482 V/7343-20 A700V826M004ATE025 20 625 3300 3125
482 V/7343-20 A700V826M004ATE028 20 628 3100 3125
4100 D/7343-31 A700D107M004ATE018 24 618 3700 3125
4100 D/7343-31 A700D107M004ATE025 24 625 3200 3125
4100 D/7343-31 A700D107M004ATE028 24 628 3000 3125
4100 V/7343-20 A700V107M004ATE025 24 625 3300 3125
4100 V/7343-20 A700V107M004ATE028 24 628 3100 3125
4120 D/7343-31 A700D127M004ATE015 29 615 4100 3125
4120 D/7343-31 A700D127M004ATE018 29 618 3700 3125
4150 D/7343-31 A700D157M004ATE015 36 615 4100 3125
4150 D/7343-31 A700D157M004ATE018 36 618 3700 3125
4150 V/7343-20 A700V157M004ATE016 36 616 4100 3125
4180 D/7343-31 A700D187M004ATE012 43 612 4600 3125
4180 D/7343-31 A700D187M004ATE015 43 615 4100 3125
4180 D/7343-31 A700D187M004ATE018 43 618 3700 3125
4180 X/7343-43 A700X187M004ATE010 43 610 4700 3125
4180 X/7343-43 A700X187M004ATE015 43 615 3900 3125
4180 X/7343-43 A700X187M004ATE018 43 618 3500 3125
4220 D/7343-31 A700D227M004ATE009 53 6 9 5300 3125
4220 D/7343-31 A700D227M004ATE010 53 610 5000 3125
4220 D/7343-31 A700D227M004ATE015 53 615 4100 3125
4220 X/7343-43 A700X227M004ATE009 53 6 9 5000 3125
4220 X/7343-43 A700X227M004ATE010 53 610 4700 3125
4220 X/7343-43 A700X227M004ATE015 53 615 3900 3125
4270 X/7343-43 A700X277M004ATE010 65 610 4700 3125
4270 X/7343-43 A700X277M004ATE015 65 615 3900 3125
4330 X/7343-43 A700X337M004ATE008 79 6 8 5300 3125
4330 X/7343-43 A700X337M004ATE010 79 610 4700 3125
4330 X/7343-43 A700X337M004ATE015 79 615 3900 3125
6.3 10 V/7343-20 A700V106M006ATE055 3 6 55 2200 3125
6.3 22 V/7343-20 A700V226M006ATE028 6 6 28 3100 3125
6.3 22 V/7343-20 A700V226M006ATE045 6 6 45 2400 3125
6.3 33 V/7343-20 A700V336M006ATE018 8 6 18 3900 3125
6.3 33 V/7343-20 A700V336M006ATE025 8 6 25 3300 3125
6.3 33 V/7343-20 A700V336M006ATE028 8 6 28 3100 3125
6.3 47 V/7343-20 A700V476M006ATE018 12 618 3900 3125
6.3 47 V/7343-20 A700V476M006ATE025 12 625 3300 3125
6.3 47 V/7343-20 A700V476M006ATE028 12 628 3100 3125
6.3 56 V/7343-20 A700V566M006ATE018 14 618 3900 3125
6.3 56 V/7343-20 A700V566M006ATE025 14 625 3300 3125
6.3 56 V/7343-20 A700V566M006ATE028 14 628 3100 3125
6.3 68 V/7343-20 A700V686M006ATE015 17 615 4200 3 125
6.3 68 V/7343-20 A700V686M006ATE018 17 618 3900 3125
6.3 68 V/7343-20 A700V686M006ATE025 17 625 3300 3125
6.3 68 V/7343-20 A700V686M006ATE028 17 628 3100 3125
6.3 82 V/7343-20 A700V826M006ATE018 21 618 3900 3125
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 182
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 77
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
A700 V476 M006 A T E018
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
A =
Aluminum
700 =
Aluminum
Polymer
D, V, W, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
002 = 2 V
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
A = N/A
T = 100%
Matte Tin
(Sn) Plated
E = ESR
Last three
digits specify
ESR in mΩ
(018 = 18 mΩ)
Blank = 7" Reel
7280 = 13" Reel
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
6.3 82 V/7343-20 A700V826M006ATE025 21 625 3300 3125
6.3 82 V/7343-20 A700V826M006ATE028 21 628 3100 3125
6.3 100 V/7343-20 A700V107M006ATE015 25 615 4200 3 125
6.3 100 V/7343-20 A700V107M006ATE018 25 618 3900 3125
6.3 100 V/7343-20 A700V107M006ATE025 25 625 3300 3125
6.3 100 D/7343-31 A700D107M006ATE015 25 615 4100 3125
6.3 100 D/7343-31 A700D107M006ATE018 25 618 3700 3125
6.3 120 D/7343-31 A700D127M006ATE012 30 612 4600 3125
6.3 120 D/7343-31 A700D127M006ATE015 30 615 4100 3125
6.3 120 D/7343-31 A700D127M006ATE018 30 618 3700 3125
6.3 150 D/7343-31 A700D157M006ATE010 38 610 5000 3125
6.3 150 D/7343-31 A700D157M006ATE012 38 612 4600 3125
6.3 150 D/7343-31 A700D157M006ATE015 38 615 4100 3125
6.3 150 X/7343-43 A700X157M006ATE010 38 610 4700 3125
6.3 150 X/7343-43 A700X157M006ATE012 38 612 4300 3125
6.3 150 X/7343-43 A700X157M006ATE015 38 615 3900 3125
6.3 180 D/7343-20 A700D187M006ATE010 45 610 5000 3125
6.3 180 X/7343-43 A700X187M006ATE010 45 610 4700 3125
6.3 180 X/7343-43 A700X187M006ATE015 45 615 3900 3125
6.3 220 X/7343-20 A700X227M006ATE010 55 610 4700 3125
6.3 220 X/7343-43 A700X227M006ATE015 55 615 3900 3125
810 V/7343-20 A700V106M008ATE055 3 6 55 2200 3125
822 V/7343-20 A700V226M008ATE028 7628 3100 3125
822 V/7343-20 A700V226M008ATE045 7645 2400 3125
833 V/7343-20 A700V336M008ATE018 11 618 3900 3125
833 V/7343-20 A700V336M008ATE025 11 625 3300 3125
833 V/7343-20 A700V336M008ATE028 11 628 3100 3125
856 D/7343-31 A700D566M008ATE015 18 615 4100 3125
856 D/7343-31 A700D566M008ATE018 18 618 3700 3125
868 D/7343-31 A700D686M008ATE015 22 615 4100 3125
868 D/7343-31 A700D686M008ATE018 22 618 3700 3125
8100 X/7343-43 A700X107M008ATE010 32 610 4700 3125
8100 X/7343-43 A700X107M008ATE012 32 612 4300 3125
8100 X/7343-43 A700X107M008ATE015 32 615 3900 3125
10 10 V/7343-20 A700V106M010ATE055 4 6 55 2200 3125
10 22 V/7343-20 A700V226M010ATE028 9 6 28 3100 3125
10 22 V/7343-20 A700V226M010ATE045 9 6 45 2400 3125
10 33 V/7343-20 A700V336M010ATE018 13 618 3900 3125
10 33 V/7343-20 A700V336M010ATE025 13 625 3300 3125
10 33 V/7343-20 A700V336M010ATE028 13 628 3100 3125
10 47 V/7343-20 A700V476M010ATE025 19 625 3300 3125
10 47 V/7343-20 A700V476M010ATE028 19 628 3100 3125
10 56 D/7343-31 A700D566M010ATE015 22 615 4100 3125
10 56 D/7343-31 A700D566M010ATE018 22 618 3700 3125
10 68 D/7343-31 A700D686M010ATE015 27 615 4100 3125
10 68 D/7343-31 A700D686M010ATE018 27 618 3700 3125
10 100 X/7343-43 A700X107M010ATE010 40 610 4700 3125
10 100 X/7343-43 A700X107M010ATE015 40 615 3900 3125
10 120 X/7343-43 A700X127M010ATE010 48 610 4700 3125
10 120 X/7343-43 A700X127M010ATE015 48 615 3900 3125
10 150 X/7343-43 A700X157M010ATE010 60 610 4700 3125
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
6.3 82 V/7343-20 A700V826M006ATE025 21 625 3300 3125
6.3 82 V/7343-20 A700V826M006ATE028 21 628 3100 3125
6.3 100 V/7343-20 A700V107M006ATE015 25 615 4200 3 125
6.3 100 V/7343-20 A700V107M006ATE018 25 618 3900 3125
6.3 100 V/7343-20 A700V107M006ATE025 25 625 3300 3125
6.3 100 D/7343-31 A700D107M006ATE015 25 615 4100 3125
6.3 100 D/7343-31 A700D107M006ATE018 25 618 3700 3125
6.3 120 D/7343-31 A700D127M006ATE012 30 612 4600 3125
6.3 120 D/7343-31 A700D127M006ATE015 30 615 4100 3125
6.3 120 D/7343-31 A700D127M006ATE018 30 618 3700 3125
6.3 150 D/7343-31 A700D157M006ATE010 38 610 5000 3125
6.3 150 D/7343-31 A700D157M006ATE012 38 612 4600 3125
6.3 150 D/7343-31 A700D157M006ATE015 38 615 4100 3125
6.3 150 X/7343-43 A700X157M006ATE010 38 610 4700 3125
6.3 150 X/7343-43 A700X157M006ATE012 38 612 4300 3125
6.3 150 X/7343-43 A700X157M006ATE015 38 615 3900 3125
6.3 180 D/7343-20 A700D187M006ATE010 45 610 5000 3125
6.3 180 X/7343-43 A700X187M006ATE010 45 610 4700 3125
6.3 180 X/7343-43 A700X187M006ATE015 45 615 3900 3125
6.3 220 X/7343-20 A700X227M006ATE010 55 610 4700 3125
6.3 220 X/7343-43 A700X227M006ATE015 55 615 3900 3125
810 V/7343-20 A700V106M008ATE055 3 6 55 2200 3125
822 V/7343-20 A700V226M008ATE028 7628 3100 3125
822 V/7343-20 A700V226M008ATE045 7645 2400 3125
833 V/7343-20 A700V336M008ATE018 11 618 3900 3125
833 V/7343-20 A700V336M008ATE025 11 625 3300 3125
833 V/7343-20 A700V336M008ATE028 11 628 3100 3125
856 D/7343-31 A700D566M008ATE015 18 615 4100 3125
856 D/7343-31 A700D566M008ATE018 18 618 3700 3125
868 D/7343-31 A700D686M008ATE015 22 615 4100 3125
868 D/7343-31 A700D686M008ATE018 22 618 3700 3125
8100 X/7343-43 A700X107M008ATE010 32 610 4700 3125
8100 X/7343-43 A700X107M008ATE012 32 612 4300 3125
8100 X/7343-43 A700X107M008ATE015 32 615 3900 3125
10 10 V/7343-20 A700V106M010ATE055 4 6 55 2200 3125
10 22 V/7343-20 A700V226M010ATE028 9 6 28 3100 3125
10 22 V/7343-20 A700V226M010ATE045 9 6 45 2400 3125
10 33 V/7343-20 A700V336M010ATE018 13 618 3900 3125
10 33 V/7343-20 A700V336M010ATE025 13 625 3300 3125
10 33 V/7343-20 A700V336M010ATE028 13 628 3100 3125
10 47 V/7343-20 A700V476M010ATE025 19 625 3300 3125
10 47 V/7343-20 A700V476M010ATE028 19 628 3100 3125
10 56 D/7343-31 A700D566M010ATE015 22 615 4100 3125
10 56 D/7343-31 A700D566M010ATE018 22 618 3700 3125
10 68 D/7343-31 A700D686M010ATE015 27 615 4100 3125
10 68 D/7343-31 A700D686M010ATE018 27 618 3700 3125
10 100 X/7343-43 A700X107M010ATE010 40 610 4700 3125
10 100 X/7343-43 A700X107M010ATE015 40 615 3900 3125
10 120 X/7343-43 A700X127M010ATE010 48 610 4700 3125
10 120 X/7343-43 A700X127M010ATE015 48 615 3900 3125
10 150 X/7343-43 A700X157M010ATE010 60 610 4700 3125
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 183
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 88
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
A700 V476 M006 A T E018
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
Failure Rate/
Design
Lead Material
ESR Code
Packaging
(C-Spec)
A =
Aluminum
700 =
Aluminum
Polymer
D, V, W, X
First two digits
represent signi cant
gures. Third digit
speci es number of
zeros.
M = ±20%
002 = 2 V
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
008 = 8 V
010 = 10 V
12R = 12.5 V
016 = 16 V
A = N/A
T = 100%
Matte Tin
(Sn) Plated
E = ESR
Last three
digits specify
ESR in mΩ
(018 = 18 mΩ)
Blank = 7" Reel
7280 = 13" Reel
Roll Over for
Order Info.
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
10 150 X/7343-43 A700X157M010ATE015 60 615 3900 3125
12 10 V/7343-20 A700V106M12RATE040 5 6 40 2600 3125
12 10 V/7343-20 A700V106M12RATE055 5 6 55 2200 3125
12 10 V/7343-20 A700V106M12RATE060 5 6 60 2100 3125
12 15 V/7343-20 A700V156M12RATE040 7640 2600 3125
12 15 V/7343-20 A700V156M12RATE045 7645 2400 3125
12 22 V/7343-20 A700V226M12RATE030 11 630 3000 3125
12 33 V/7343-20 A700V336M12RATE025 16 625 3300 3125
12 56 D/7343-31 A700D566M12RATE020 27 620 3500 3125
12 47 D/7343-31 A700D476M12RATE020 23 620 3500 3125
12 47 D/7343-31 A700D476M12RATE025 23 625 3200 3125
12 100 X/7343-43 A700X107M12RATE012 48 612 4300 3125
12 100 X/7343-43 A700X107M12RATE015 48 615 3900 3125
16 6.8 V/7343-20 A700V685M016ATE070 4 6 70 2000 3125
16 8.2 V/7343-20 A700V825M016ATE045 5 6 45 2400 3125
16 10 V/7343-20 A700V106M016ATE045 6 6 45 2400 3125
16 10 V/7343-20 A700V106M016ATE060 6 6 60 2100 3125
16 15 V/7343-20 A700V156M016ATE040 10 640 2600 3125
16 22 D/7343-31 A700D226M016ATE018 14 618 3700 3125
16 22 D/7343-31 A700D226M016ATE025 14 625 3200 3125
16 22 D/7343-31 A700D226M016ATE030 14 630 2900 3125
VDC
µF
KEMET/EIA
(See below for
part options)
µA @ +20ºC
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
R e o w
Temperature
260ºC
(ºC)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
10 150 X/7343-43 A700X157M010ATE015 60 615 3900 3125
12 10 V/7343-20 A700V106M12RATE040 5 6 40 2600 3125
12 10 V/7343-20 A700V106M12RATE055 5 6 55 2200 3125
12 10 V/7343-20 A700V106M12RATE060 5 6 60 2100 3125
12 15 V/7343-20 A700V156M12RATE040 7640 2600 3125
12 15 V/7343-20 A700V156M12RATE045 7645 2400 3125
12 22 V/7343-20 A700V226M12RATE030 11 630 3000 3125
12 33 V/7343-20 A700V336M12RATE025 16 625 3300 3125
12 56 D/7343-31 A700D566M12RATE020 27 620 3500 3125
12 47 D/7343-31 A700D476M12RATE020 23 620 3500 3125
12 47 D/7343-31 A700D476M12RATE025 23 625 3200 3125
12 100 X/7343-43 A700X107M12RATE012 48 612 4300 3125
12 100 X/7343-43 A700X107M12RATE015 48 615 3900 3125
16 6.8 V/7343-20 A700V685M016ATE070 4 6 70 2000 3125
16 8.2 V/7343-20 A700V825M016ATE045 5 6 45 2400 3125
16 10 V/7343-20 A700V106M016ATE045 6 6 45 2400 3125
16 10 V/7343-20 A700V106M016ATE060 6 6 60 2100 3125
16 15 V/7343-20 A700V156M016ATE040 10 640 2600 3125
16 22 D/7343-31 A700D226M016ATE018 14 618 3700 3125
16 22 D/7343-31 A700D226M016ATE025 14 625 3200 3125
16 22 D/7343-31 A700D226M016ATE030 14 630 2900 3125
VDC µF KEMET/EIA (See below for
part options)
µA @ +2C
Maximum/5
Minutes
% @ +20ºC
120 Hz
Maximum
mΩ @ 20ºC
100 kHz
Maximum
(mA) @ 100 kHz
with/T = +20ºC @ -55ºC
to 125ºC
Reow
Temperature
≤ 260ºC
C)
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Ripple Current Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 184
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 99
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
Derating Guidelines
Voltage Rating
Maximum
Recommended
Steady State
Voltage
Maximum
Recommended
Transient Voltage
(1 ms – 1 µs)
-55°C to 125°C
2 V ≤ VR ≤ 16 V VRVR
VR = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the
device. Permissible AC ripple voltage which may be applied is limited by two criteria
1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specifi ed for
reverse voltage. See the Reverse Voltage section for allowable limits
Power capability is determined based on a 20°C temperature rise. A higher temperature rise and therefore higher power capability is
allowable as long as the ambient temperature plus temperature rise due to ripple current does not exceed the rated temperature of the
part.
The maximum power dissipation by case size can be determined using the below table.
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
with +20°C Rise
A700W
7343-15
290
A700V
7343-20
270
A700D
7343-31
250
A700X
7343-43
225
Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at speci ed frequency (ohms)
Z = Impedance at speci ed frequency (Ohms)
Refer to part number listings for permittable Arms limits.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 185
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 1010
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
Reverse Voltage
Polymer aluminum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a certain degree of transient voltage reversal for short periods as shown in the below table. Please note
that these parts may not be operated continuously in reverse, even within these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
60% of Rated Voltage
55°C
50% of Rated Voltage
85°C
40% of Rated Voltage
12C
30% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for refl ow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for re ow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform quali cation testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 186
© KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com T2020_A700 8/5/2013 1111
Aluminum Organic Capacitor (AO-CAP) – A700 Series Polymer Aluminum
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMETs families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase refl ow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profi le conditions for convection and IR refl ow refl ect the profi le
conditions of the IPC/J–STD020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three refl ow passes at these conditions.
Please note that although the X/734343 case size can withstand
wave soldering, the tall profi le (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the diffi culty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until refl ow occurs. Once refl ow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical refl ow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Pro le Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (TSmax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (T
P
to T
L
)6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
Temperature
6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly refl ow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 187
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
Table 3 – Packaging Quantity
Case Code
Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E/T428P
7360-38
12
500
2,000
H
7360-20
12
1,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
8 mm (0.315")
or
12 mm (0.472") 180 mm (7.0")
or
330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 188
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum T1 Maximum
8 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0
8 mm Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 189
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 190
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W
1
W
2
Maximum W
3
8 mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16 mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 191
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 192
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
Table 3 – Packaging Quantity
Case Code
Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
R
2012-12
8
2,500
10,000
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-19
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E/T428P
7360-38
12
500
2,000
H
7360-20
12
1,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
8 mm (0.315")
or
12 mm (0.472") 180 mm (7.0")
or
330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 193
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum T1 Maximum
8 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0
8 mm Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–1, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–1 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 194
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 195
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W
1
W
2
Maximum W
3
8 mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16 mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 196
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 197
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 198
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all productrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com TC102_LOWESR • 8/5/2013 199
Tantalum & Aluminum Surface Mount Capacitors – Low ESR
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.08.05 14:55:18 -04'00'
Electronic Components
One world. One KEMET.
Corporate Offices
KEMET Corporation
2835 KEMET Way
Simpsonville, SC 29681
USA
Tel: 864.963.6300
Fax: 864.963.6521
KEMET Electronics GmbH
Rudolf-Diesel-Straße 21
86899 Landsberg
Germany
Tel: +49 8191 3350 ext. 0
Fax: 49 8191 335063
KEMET Electronics Marketing (S) Pte Ltd.
73 Bukit Timah Road
#05-01 Rex House
Singapore 229832
Tel: 65.6586.1900
Fax: 65.6586.1901
www.kemet.com