MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-2414
ICTE5.0 to ICTE15C MPTE-5 to MPTE-45
1N6373 to 1N6381 and 1N6382 to 1N6389
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
STANDOFF VOLTAGE- 5.0 to 45.0V
1500 Watt Peak Power
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
• Glass passivated chip junction in Molded Plastic package
• 1500W surge capability at 1ms
• Excellent clamping capability
• Low zener inpedance
• Fast response time: typically less than
1.0 ps from 0 volts to BV min.
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed:
250°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension
• Includes 1N6373 thru 1N6385
MECHANICAL DATA
Case: JEDEC DO-201 Molded plastic
Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.045 ounces, 1.2 grams
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING SYMBOL
V
ALUE UNITS
Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms
(NOTE 1)
Ippm SEE TABLE 1 Amps
Superimposed on Rated Load, (JEDEC Method)(Note 3)
Operatings and Storage Temperature Range Tj, Tstg -55 +175 °C
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
Volt
Maximum instantaneous forward voltage at 100A for
unidirectional only Vf 3.5
IFSM 200 Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Watts
Pppm Minimum 1500 Watts
Peak Pulse Current of on 10/1000 µs waveform (Note 1)
Pm(AV) 5.0
Steady State Power Dissipation at TL = 75°C
Lead lengths .375", 9.5mm (Note 2)
8/6/2002
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-241
4
ICTE5.0 tou ICTE15C MPTE-5 to MPTE-45
1N6373 to 1N6381 and 1N6382 to 1N6389
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
STANDOFF VOLTAGE- 5.0 to 45.0V
1500 Watt Peak Power
REVERSE
STANDOFF
VOLTAGE
(VRWM)
(V)
MINIMUM
BREAKDOWN
VOLTAGE
VBR @ 1mA
(Volts)
MAXIMUM
REVERSE
LEAKAGE
IR @ Vr
(µA)
MAXIMUM
CLAMPING
V
OLTAGE
(Vc) @
Ipp=1A
(Volts)
MAXIMUM
CLAMPING
VOLTAGE
(Vc) @ Ipp=1A
(Volts)
MAXIMUM
PEAK
PULSE
CURRENT
Ipp (A)
ICTE-5* 1N6373 MPTE-5* 5* 6.0 300.0 7.1 7.5 160.0
ICTE-8 1N6374 MPTE-8 8.0 9.4 25.0 11.3 11.5 100.0
ICTE-10 1N6375 MPTE-10 10.0 11.7 2.0 13.7 14.1 90.0
ICTE-12 1N6376 MPTE-12 12.0 14.1 2.0 16.1 16.5 70.0
ICTE-15 1N6377 MPTE-18 15.0 17.6 2.0 20.1 20.6 60.0
ICTE-18 1N6378 MPTE-18 18.0 21.2 2.0 24.2 25.2 50.0
ICTE-22 1N6379 MPTE-22 22.0 25.9 2.0 29.8 32.0 40.0
ICTE-36 1N6380 MPTE-36 36.0 42.4 2.0 50.6 54.3 23.0
ICTE-45 1N6381 MPTE-45 45.0 52.9 2.0 63.3 70.0 19.0
ICTE-8C 1N6382 MPTE-8C 8.0 9.4 50 11.4 11.6 100.0
ICTE-10C 1N6383 MPTE-10C 10.0 11.7 2.0 14.1 14.5 90.0
ICTE-12C 1N6384 MPTE-12C 12.0 14.1 2.0 16.7 17.1 70.0
ICTE-15C 1N6385 MPTE-15C 15.0 17.6 2.0 20.8 21.4 60.0
ICTE-18C 1N6386 MPTE-18C 18.0 21.2 2.0 24.8 25.5 50.0
ICTE-22C 1N6387 MPTE-22C 22.0 25.9 2.0 30.8 32.0 40.0
ICTE-36C 1N6388 MPTE-36C 36.0 42.4 2.0 50.6 54.3 23.0
ICTE-45C 1N6389 MPTE-45C 45.0 52.9 2.0 63.3 70.0 19.0
*ICTE-5 is not available in Bi-directional. Suffix 'C' denotes Bi-directional device.
Part Numbers