HY92-12LF - SKYWORKS SOLUTIONS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200237 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006

HY92-12, HY92-12LF: 90-Degree Hybrid 0.88–0.96 GHz

DATA SHEET

Parameter Frequency Min. Typ. Max. Unit

Frequency 0.88 0.96 GHz

Insertion loss(1) 0.4 0.5 dB

Isolation 20 25 dB

VSWR all ports 1.1:1 1.2:1

Amplitude balance ±0.5 ±0.8 dB

Phase balance ±1 ±2 Deg.

Electrical Specifications at 25 °C

ZO= 50 Ω, unless otherwise noted

Features

●Low cost

●Low profile

●Small SOIC-8 package

●Available on tape and reel

●Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C

per JEDEC J-STD-020

Description

The HY92-12 is a 90-degree hybrid tuned for the 0.88–0.96 GHz

band. The monolithic circuitry is 100% passive and offers low

loss, high isolation and exceptional phase/amplitude balance. It is

available in the SOIC-8 surface mount package.

1. Less 3 dB power split.

1234

RF In

GND

ISOL.

GND

8765

GND

Coupled

Direct

GND

Pin Out

Direct

Coupled

Isolated

Block Diagram

Skyworks offers lead (Pb)-free, RoHS (Restriction of

Hazardous Substances)-compliant packaging.

NEW

The Pin Out diagram shows the HY92-12 configured for a

divider/coupler with Pin 1 as the input port and a 50 Ω

termination to be placed at Pin 3. Since the HY92-12 is

symmetric, any nonground pin may be used as the input

port. The following table shows the possible pin connection

combinations for the HY92-12 used as a divider/coupler:

Input Termination Direct Coupled

Pin 1 Pin 4 Pin 8 Pin 5

Pin 4 Pin 1 Pin 5 Pin 8

Pin 5 Pin 8 Pin 4 Pin 1

Pin 8 Pin 5 Pin 1 Pin 4

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

June 8, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200237 Rev. A

DATA SHEET • HY92-12, HY92-12LF

Path Losses vs. Frequency

Frequency (GHz)

0.88 0.90 0.92 0.94 0.96

Loss (dB)

-4.0

-3.8

-3.6

-3.4

-3.2

-3.0

Direct

Coupled

Amplitude Balance vs. Frequency

Frequency (GHz)

Balance (dB)

-1.00

1.00

0.75

0.50

0.25

0.00

-0.25

-0.50

-0.75

0.88 0.90 0.92 0.94 0.96

Input VSWR vs. Frequency

Frequency (GHz)

VSWR (:1)

1.00

1.05

1.10

1.15

1.20

1.25

1.30

0.88 0.90 0.92 0.94 0.96

Output VSWR vs. Frequency

Frequency (GHz)

VSWR (:1)

1.00

1.05

1.10

1.15

1.20

1.25

1.30

Coupled

Direct

0.88 0.90 0.92 0.94 0.96

Coupled – Direct Phase vs. Frequency

Frequency (GHz)

Phase (Deg.)

89.0

89.4

89.8

90.2

90.6

91.0

0.88 0.90 0.92 0.94 0.96

Isolation vs. Frequency

Frequency (GHz)

Isolation (dB)

-45

-36

-27

-18

-9

0.88 0.90 0.92 0.94 0.96

Typical Performance Data

ZO= 50 Ω, unless otherwise noted

DATA SHEET • HY92-12, HY92-12LF

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200237 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006 3

Characteristic Value

Input power(1) 4 W

Operating temperature -40 °C to +85 °C

Storage temperature -65 °C to +150 °C

Electrostatic discharge 125 V

Absolute Maximum Ratings

1. Exceeding these parameters may cause irreversible damage.

Performance is guaranteed only under the conditions listed in the specifications table and is

not guaranteed under the full range(s) described by the Absolute Maximum specifications.

Exceeding any of the absolute maximum/minimum specifications may result in permanent

damage to the device and will void the warranty.

CAUTION: Although this device is designed to be as robust as

possible, ESD (Electrostatic Discharge) can damage

this device. This device must be protected at all times

from ESD. Static charges may easily produce poten-

tials of several kilovolts on the human body or

equipment, which can discharge without detection.

Industry-standard ESD precautions must be employed

at all times.

Recommended Board Layout

0.1630

0.0282

0.0180

Typ.

0.0424

0.0200 Dia.

ia 12 Places

SOIC-8

0.049

(1.24 mm)

0.016

(0.41 mm)

0.016 Max.

(0.41 mm) x

45˚ Chamfer

Pin 1

0.197 (5.00 mm)

0.189 (4.80 mm)

0.068

(1.73 mm) Max.

0.010 (0.25 mm)

0.004 (0.10 mm)

0.010 (0.25 mm)

0.007 (0.17 mm)

0.158 (4.00 mm)

0.150 (3.80 mm)

8˚

Max.

0.020 (0.51 mm) Max.

0.244 (6.20 mm)

0.228 (5.80 mm)

0.050 (1.27 mm) BSC

Pin 8

Pin 1

Indicator

Materials 10 mil FR-4.

Dimensions are in inches.

Recommended Solder Reflow Profiles

Refer to the “Recommended Solder Reflow Profile”

Application Note.

ape and Reel Information

Refer to the “Discrete Devices and IC Switch/Attenuators

Tape and Reel Package Orientation” Application Note.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

June 8, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200237 Rev. A

DATA SHEET • HY92-12, HY92-12LF

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided

by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and

Conditions of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and

names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are

incorporated by reference.