MAGX-000040-005PPR - M/A-COM Technology Solutions

ATC 800 B Series

NPO Ceramic, High RF Power

Ultra-Low ESR

Multilayer Capacitors

• Case B Size

(.110” x .110”)

• Rugged, reliable

NPO dielectric

• Case optimized for

highest self resonant

frequency

• Capacitance Range

0.1 pF to 1000 pF

• Lowest ESR

• Capable of highest

RF Power

• RoHS Compliant / Lead-Free

ATC’s 800 B Series offers superb performance in demanding high RF

power applications requiring consistent and reliable operation. The

combination of highly conductive metal electrode systems, optimized

case geometries, and proprietary dielectrics, yields the lowest ESR.

ATC’s new NPO low loss rugged dielectrics are designed to provide

superior heat transfer in high RF power applications. Ultra-low ESR

and superior thermal performance insure that the 800 B Series prod-

ucts are your best choice for high RF power applications from VHF

through microwave frequencies.

Typical applications: VHF / UHF / HDTV Broadcast Transmitters, Wire-

less Communications, Public Safety Radio, Avionics, Telecom, WiMAX,

Microwave Communication Systems and Satellite Systems.

Typical circuit applications: High RF Power Filter Networks, Combiners,

Couplers, Matching Networks, Output Coupling, Antenna Coupling, and

DC Blocking and Bypassing.

ENVIRONMENTAL TESTS

ATC 800 B Series Capacitors are designed and manufactured to meet and

exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123.

THERMAL SHOCK:

MIL-STD-202, Method 107, Condition A

MOISTURE RESISTANCE:

MIL-STD-202, Method 106

LOW VOLTAGE HUMIDITY:

MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied

while subjected to an environment of 85°C with 85% relative

humidity for 240 hours min.

LIFE TEST:

MIL-STD-202, Method 108, for 2000 hours, at 125°C

200% WVDC applied

ELECTRICAL AND MECHANICAL

SPECIFICATIONS

QUALITY FACTOR (Q): . 2000 @ 1 MHz

TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):

0 ±30 PPM/°C (-55°C to +125°C)

INSULATION RESISTANCE (IR):

0.1 pF to 1000 pF:

105 Megohms min. @ +25°C at rated WVDC

104 Megohms min. @ +125°C at rated WVDC

WORKING VOLTAGE (WVDC):

See Capacitance Values Table, page 2

DIELECTRIC WITHSTANDING VOLTAGE (DWV):

Case B: 250% of rated WVDC for 5 secs

RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater

AGING EFFECTS: None

PIEZOELECTRIC EFFECTS: None

(No capacitance variation with voltage or pressure)

CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater

OPERATING TEMPERATURE RANGE:

From -55°C to +125°C (No derating of working voltage)

TERMINATION STYLES: RoHS Compliant and Solder Plate

See Mechanical Conﬁgurations, page 3

TERMINAL STRENGTH: Terminations for chips withstand a pull of

5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular

to the termination surface of the capacitor. Test per MIL-STD-202,

method 211.

THE ENGINEERS’ CHOICE® www.atceramics.com

American Technical Ceramics

ATC # 001-1033 Rev. J, 1/18

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com

ATC 800 B Capacitance Values

VRMS = 0.707 X WVDC

• SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY.

CAP. CAP. RATED CAP. CAP. RATED CAP. CAP. RATED CAP. CAP. RATED

CODE (pF) TOL. WVDC CODE (pF) TOL. WVDC CODE (pF) TOL. WVDC CODE (pF) TOL. WVDC

0R1 0.1 2R4 2.4 200 20 151 150

0R2 0.2 2R7 2.7 220 22 161 160

0R3 0.3 3R0 3.0 240 24 181 180

0R4 0.4 3R3 3.3 270 27 201 200

0R5 0.5 3R6 3.6 300 30 221 220

0R6 0.6 3R9 3.9 330 33 241 240

0R7 0.7 4R3 4.3 360 36 271 270

0R8 0.8 4R7 4.7 390 39 301 300

0R9 0.9 5R1 5.1 430 43 331 330

1R0 1.0 5R6 5.6 470 47 361 360

1R1 1.1 6R2 6.2 510 51 391 390

1R2 1.2 6R8 6.8 560 56 431 430

1R3 1.3 7R5 7.5 620 62 471 470

1R4 1.4 8R2 8.2 680 68 511 510

1R5 1.5 9R1 9.1 750 75 561 560

1R6 1.6 100 10 820 82 621 620

1R7 1.7 110 11 910 91 681 680

1R8 1.8 120 12 101 100 751 750

1R9 1.9 130 13 111 110 821 820

2R0 2.0 150 15 121 120 911 910

2R1 2.1 160 16 131 130 102 1000

2R2 2.2 180 18

B, C

B, C,

500

300

200

100

500

B, C,

J, K,

F, G,

J, K,

F, G,

J, K,

F, G,

J, K,

ATC PART NUMBER CODE

ATC800 B 91 0 J T 500 X T

Series

Case Size

Capacitance Code:

First 2 signiﬁcant digits for capacitance.

R=Decimal Point

Indicates number of zeros following digits

of capacitance in picofarads except for decimal values.

Capacitance Tolerance

Laser Marking

WVDC

Termination Code

Packaging

T - Tape & Reel: 500 and 1000 pc. qty. std.*

TV - Vertical Orientation of Product,

Tape & Reel: 500 and 1000 pc. qty. std.*

I - Special Packaging. Consult Factory.

*Consult ATC for other quantities

The above part number refers to a 800 B Series (case size B) 91 pF capacitor,

J tolerance (±5%), 500 WVDC, with T termination (Tin Plated over Nickel Barrier Termination, RoHS Compliant), laser marking and tape and reel packaging.

For additional information and catalogs contact your ATC

representative or call direct at (+1-631) 622-4700.

Consult factory for additional performance data.

ATC accepts orders for our parts using designations with or without the

“ATC” preﬁx. Both methods of deﬁning the part number are equivalent,

i.e., part numbers referenced with the “ATC” preﬁx are interchangeable

to parts referenced without the “ATC” preﬁx. Customers are free to use

either in specifying or procuring parts from American Technical Ceramics.

CAPACITANCE TOLERANCE

Code B C D F G J K M

Tol. ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20%

ATC

TERM.

CODE

CASE SIZE

& TYPE

OUTLINES

W/T IS A

TERMINATION SURFACE

BODY DIMENSIONS

Inches (mm)

LENGTH

(L)

WIDTH

(W)

THICKNESS

(T)

OVERLAP

(Y) MATERIAL

LEAD AND TERMINATION

DIMENSIONS AND MATERIALS

Solder Plate

.110

+.020 -.010

(2.79

+0.51 -0.25)

.110 ±.015

(2.79 ±0.38)

.070 (1.78)

max.

.015 (0.38)

±.010 (0.25)

RoHS Compliant

Tin Plated over

Nickel Barrier Termination

Tin/Lead Solder Plated over

Nickel Barrier Termination

ATC

SERIES

& CASE

SIZE

800B

Solderable

Nickel Barrier

.110

+.020 -.010

(2.79

+0.51 -0.25)

.110 ±.015

(2.79 ±0.38)

.070 (1.78)

max.

.015 (0.38)

±.010 (0.25)

800B

ATC 800 B Capacitors: Mechanical Configurations

ATC

TERM.

CODE

CASE SIZE

& TYPE

OUTLINES

W/T IS A

TERMINATION SURFACE

BODY DIMENSIONS

Inches (mm)

LENGTH

(L)

WIDTH

(W)

THICKNESS

(T)

OVERLAP

(Y) MATERIAL

LEAD AND TERMINATION

DIMENSIONS AND MATERIALS

.110

+.020 -.010

(2.79

+0.51 -0.25)

.110 ±.015

(2.79 ±0.38)

.070 (1.78)

max.

.015 (0.38)

±.010 (0.25)

RoHS Compliant

Tin Plated over

Non-Magnetic Barrier Termination

ATC

SERIES

& CASE

SIZE

800B

Non-Mag

Solderable

Barrier

ATC 800 B Capacitors: Non-Magnetic Mechanical Configurations

Suggested Mounting Pad Dimensions

Cap

Value.43) Pad Size A Min B Min C Min D Min

All

Values

Normal .090

(2.29)

.050

(1.27)

.075

(1.91)

.175

(4.45)

High

Density

.070

(1.78)

.030

(.762)

.075

(1.91)

.135

(3.43)

Cap

Value.43) Pad Size A Min B Min C Min D Min

All

Values

Normal .130

(3.30)

.050

(1.27)

.075

(1.91)

.175

(4.45)

High

Density

.110

(2.79)

.030

(.762)

.075

(1.91)

.135

(3.43)

Case B Vertical Mount

Case B Horizontal Mount

inches (mm)

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com

ATC 800 B Series Data Sheet Test Condition Description

Capacitors vertically mounted in series microstrip conguration on 23.3-mil thick Rogers RO4350® softboard, 52-mils wide 1/2 oz. Cu traces.

FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart.

FPR = lowest frequency at which there is a notch in S21 magnitude response.

ATC 800 B Performance Data

0.1

1.0

10.0

100.0

0001001011

Fpr

Fsr

800 B FSR & FPR vs. Capacitance

Capacitance (pF)

Frequency (GHz)

0.01

0.10

1.00

000010001001

Frequency (MHz)

ESR (Ohms)

(Typical)

800 B ESR vs. Frequency

1.0 pF

3.3 pF

10 pF

39 pF

100 pF

200 pF

1000 pF

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com

Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992). Copies of these terms

and conditions will be provided upon request. They may also be viewed on ATC’s website at www.atceramics.com/productﬁnder/default.asp. Click on the link for Terms and Conditions of Sale.

ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which

may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.

Temperature (Degrees C)

% Change in Capacitance

800B Capacitance Change vs. Temperature

TCC= 0 ±30 PPM/C

-1

-0.8

-0.6

-0.4

-0.2

0.2

0.4

0.6

0.8

-55 -35 -15 5 25 45 65 85 105 125

ATC 800 B Performance Data

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com