ATC 800 B Series NPO Ceramic, High RF Power Ultra-Low ESR Multilayer Capacitors * Case B Size (.110" x .110") * Rugged, reliable NPO dielectric * Case optimized for highest self resonant frequency * Capacitance Range 0.1 pF to 1000 pF * Lowest ESR * Capable of highest RF Power * RoHS Compliant / Lead-Free ATC's 800 B Series offers superb performance in demanding high RF power applications requiring consistent and reliable operation. The combination of highly conductive metal electrode systems, optimized case geometries, and proprietary dielectrics, yields the lowest ESR. ATC's new NPO low loss rugged dielectrics are designed to provide superior heat transfer in high RF power applications. Ultra-low ESR and superior thermal performance insure that the 800 B Series products are your best choice for high RF power applications from VHF through microwave frequencies. Typical applications: VHF / UHF / HDTV Broadcast Transmitters, Wireless Communications, Public Safety Radio, Avionics, Telecom, WiMAX, Microwave Communication Systems and Satellite Systems. Typical circuit applications: High RF Power Filter Networks, Combiners, Couplers, Matching Networks, Output Coupling, Antenna Coupling, and DC Blocking and Bypassing. ENVIRONMENTAL TESTS ATC 800 B Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): . 2000 @ 1 MHz TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 0.1 pF to 1000 pF: 105 Megohms min. @ +25C at rated WVDC 104 Megohms min. @ +125C at rated WVDC WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2 DIELECTRIC WITHSTANDING VOLTAGE (DWV): Case B: 250% of rated WVDC for 5 secs RETRACE: Less than (0.02% or 0.02 pF), whichever is greater AGING EFFECTS: None PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure) CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater OPERATING TEMPERATURE RANGE: From -55C to +125C (No derating of working voltage) TERMINATION STYLES: RoHS Compliant and Solder Plate See Mechanical Configurations, page 3 MOISTURE RESISTANCE: MIL-STD-202, Method 106 LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. TERMINAL STRENGTH: Terminations for chips withstand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C 200% WVDC applied American Technical THE ENGINEERS' CHOICE (R) Ceramics www.atceramics.com ATC # 001-1033 Rev. J, 1/18 ATC 800 B Capacitance Values CAP. CAP. CODE (pF) TOL. 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 RATED WVDC CAP. CODE 0.1 B 0.2 0.3 B, C 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 500 1.2 1.3 B, C, D 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 CAP. (pF) TOL. RATED WVDC 2.4 2.7 3.0 3.3 3.6 B, C, 3.9 D 4.3 4.7 5.1 5.6 6.2 500 6.8 B, C, 7.5 J, K, 8.2 M 9.1 10 11 12 F, G, 13 J, K, M 15 16 18 CAP. CODE CAP. (pF) TOL. RATED WVDC 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 111 121 131 20 22 24 27 30 33 36 39 43 500 47 F, G, 51 J, K, 56 M 62 68 75 82 91 100 110 120 300 130 CAP. CODE 151 161 181 201 221 241 271 301 331 361 391 431 471 511 561 621 681 751 821 911 102 CAP. (pF) TOL. 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 RATED WVDC 300 200 F, G, J, K, M 100 50 VRMS = 0.707 X WVDC * SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY. ATC PART NUMBER CODE ATC800 B 91 0 J T 500 X T Series Packaging T - Tape & Reel: 500 and 1000 pc. qty. std.* TV - V ertical Orientation of Product, Tape & Reel: 500 and 1000 pc. qty. std.* I - Special Packaging. Consult Factory. *Consult ATC for other quantities Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Capacitance Tolerance CAPACITANCE TOLERANCE Code B C D F G J Laser Marking K M 0.1 pF 0.25 pF 0.5 pF 1% 2% 5% 10% 20% Tol. WVDC Termination Code The above part number refers to a 800 B Series (case size B) 91 pF capacitor, J tolerance (5%), 500 WVDC, with T termination (Tin Plated over Nickel Barrier Termination, RoHS Compliant), laser marking and tape and reel packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N ATC North America sales@atceramics.com 2 For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 800 B Capacitors: Mechanical Configurations ATC ATC SERIES TERM. & CASE CODE SIZE CASE SIZE & TYPE BODY DIMENSIONS Inches (mm) OUTLINES W/T IS A TERMINATION SURFACE Y 800B T L Nickel Barrier B Solder Plate L OVERLAP (Y) MATERIAL T .015 (0.38) .010 (0.25) T .110 +.020 -.010 .110 .015 .070 (1.78) (2.79 (2.79 0.38) max. +0.51 -0.25) .015 (0.38) .010 (0.25) W W THICKNESS (T) .110 .015 .070 (1.78) (2.79 0.38) max. Y 800B WIDTH (W) .110 +.020 -.010 (2.79 +0.51 -0.25) W B Solderable LENGTH (L) LEAD AND TERMINATION DIMENSIONS AND MATERIALS RoHS Compliant Tin Plated over Nickel Barrier Termination Tin / Lead Solder Plated over Nickel Barrier Termination ATC 800 B Capacitors: Non-Magnetic Mechanical Configurations ATC ATC SERIES TERM. & CASE CODE SIZE CASE SIZE & TYPE B 800B TN Non-Mag Solderable Barrier BODY DIMENSIONS Inches (mm) OUTLINES W/T IS A TERMINATION SURFACE Y W L T LENGTH (L) .110 +.020 -.010 (2.79 +0.51 -0.25) WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS THICKNESS (T) .110 .015 .070 (1.78) (2.79 0.38) max. OVERLAP (Y) .015 (0.38) .010 (0.25) MATERIAL RoHS Compliant Tin Plated over Non-Magnetic Barrier Termination Suggested Mounting Pad Dimensions Case B Vertical Mount Cap Pad Size Value.43) All Values A Min B Min C Min D Min Normal .090 (2.29) .050 (1.27) .075 (1.91) .175 (4.45) High Density .070 (1.78) .030 (.762) .075 (1.91) .135 (3.43) Case B Horizontal Mount Cap Pad Size Value.43) All Values A Min B Min C Min D Min Normal .130 (3.30) .050 (1.27) .075 (1.91) .175 (4.45) High Density .110 (2.79) .030 (.762) .075 (1.91) .135 (3.43) inches (mm) A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 3 ATC 800 B Performance Data 800 B ESR vs. Frequency 1.00 ESR (Ohms) 1.0 pF 3.3 pF 10 pF 39 pF 0.10 100 pF 200 pF 1000 pF (Typical) 0.01 100 1000 10000 Frequency (MHz) 800 B FSR & FPR vs. Capacitance 100.0 Fpr Frequency (GHz) 10.0 Fsr 1.0 0.1 1 10 100 1000 Capacitance (pF) ATC 800 B Series Data Sheet Test Condition Description Capacitors vertically mounted in series microstrip configuration on 23.3-mil thick Rogers RO4350(R) softboard, 52-mils wide 1/2 oz. Cu traces. FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart. FPR = lowest frequency at which there is a notch in S21 magnitude response. A M E R I C A N ATC North America sales@atceramics.com 4 T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 800 B Performance Data 800B Capacitance Change vs. Temperature 1 TCC= 0 30 PPM/C 0.8 0.6 % Change in Capacitance 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1 -55 -35 -15 5 25 45 65 85 105 125 Temperature (Degrees C) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 2006 American Technical Ceramics Corp. All Rights Reserved. A M E R I C A N ATC North America sales@atceramics.com ATC # 001-1033 Rev.J, 1/18 T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 5