https://www.phoenixcontact.com/gb/products/1419658
04/03/14Page1/5
Flush-type connector-SACC-DSI-M12FS-5CON-M16/0,5-1419658
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread,
with 0.5 m TPE litz wire, 5 x 0.34 mm²
Key commercial data
Packing unit 1 pc
GTIN
Weight per Piece (excluding packing) 25.33 g
Custom tariff number 85444290
Country of origin Germany
Technical data
Dimensions
Length of cable 0.5 m
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
Degree of protection IP67
IP67
General
Note
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
Rated current at 40°C 4 A
Rated voltage 60 V
Number of positions 5
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
https://www.phoenixcontact.com/gb/products/1419658
04/03/14Page2/5
Flush-type connector-SACC-DSI-M12FS-5CON-M16/0,5-1419658
Technical data
General
Coding A - standard
Standards/regulations M12 connector IEC 61076-2-101
Signal type/category Universal
Status display No
Surge voltage category II
Pollution degree 3
Connection method Individual wires
Insertion/withdrawal cycles > 100
Torque 3 Nm ... 4 Nm (Einbauseitig)
Mounting type Rear mounting M16 x 1.5 With flat nut
Material
Inflammability class according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA 66
Material, knurls Zinc die-cast, nickel-plated
Sealing material FKM
Cable
Cable type TPE litz wire
Conductor cross section 0.34 mm²
AWG signal line 22
Conductor structure signal line 7x 0.25 mm
Core diameter including insulation 1.2 mm ±0.07 mm
Thickness, insulation 0.21 mm
Wire colors Black, brown,blue, white, gray
Material conductor insulation TPE
Conductor material Tin-plated Cu litz wires
Insulation resistance ≥ 20 MΩ*km
Conductor resistance ≤ 57.6 mΩ/m
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (cable, flexible installation)
Classifications
eCl@ss
eCl@ss 4.0 27140815
eCl@ss 4.1 27140815
eCl@ss 5.0 27143423
https://www.phoenixcontact.com/gb/products/1419658
04/03/14Page3/5
Flush-type connector-SACC-DSI-M12FS-5CON-M16/0,5-1419658
Classifications
eCl@ss
eCl@ss 5.1 27143423
eCl@ss 6.0 27279220
eCl@ss 7.0 27440103
eCl@ss 8.0 27440103
ETIM
ETIM 2.0 EC001297
ETIM 3.0 EC002061
ETIM 4.0 EC002061
ETIM 5.0 EC002061
UNSPSC
UNSPSC 6.01 31251501
UNSPSC 7.0901 31251501
UNSPSC 11 31251501
UNSPSC 12.01 31251501
UNSPSC 13.2 39121413
Approvals
Approvals
Approvals
UL Recognized / GOST / GOST
Ex Approvals
Approvals submitted
Approval details
UL Recognized
mm²/AWG/kcmil 26-20
Nominal current IN 4 A
Nominal voltage UN 60 V
https://www.phoenixcontact.com/gb/products/1419658
04/03/14Page4/5
Flush-type connector-SACC-DSI-M12FS-5CON-M16/0,5-1419658
Approvals
GOST
GOST
Accessories
Accessories
Protective cap
Screw plug-PROT-M12-1680539
An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors
Screw plug-PROT-M12 SH-1503302
An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type
connectors
Screw plug-PROT-M12 FB-1555538
M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type
connectors for the food industry
Seal
Flat gasket-SACC-M16-SEAL CLM-1430394
M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread
https://www.phoenixcontact.com/gb/products/1419658
04/03/14Page5/5
Flush-type connector-SACC-DSI-M12FS-5CON-M16/0,5-1419658
Accessories
Drawings
Dimensioned drawing
M16x1,5
45°
Ø17+0,2
Housing cutout for M16 fastening thread, mounting panel with thread
Dimensioned drawing
13,5 1x45°
Ø16,1
max.4,5
+0,1
Housing cutout for M16 fastening thread, mounting panel with feed-
through hole (alternatively with surface as protection against rotation)
Schematic diagram
3 4
2 1
5
Pin assignment M12 socket, 5-pos., A-coded, socket side view
Dimensioned drawing
19,6
max.4,5
10
7,6 500
2
M16x1,5
18
17
M12 flush-type socket
Circuit diagram
BN
1
2
BK
4
BU
GY
3
5
WH
Contact assignment of the M12 socket
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com