HDSP-70xE 17.3 mm (0.68 inch) General Purpose 5x7 Dot Matrix Alphanumeric Displays Data Sheet HDSP-70xE Series, HDSP-71xE Series HDSP-70xG Series, HDSP-71xG Series HDSP-70xA Series, HDSP-71xA Series Description Features These displays have a 17.3 mm (0.68 inch) character height and use industry standard size and pin-out. The devices are available in either common row anode or common row cathode configurations. The displays come in either gray or black face paint and are available in a choice of high efficiency red (HER) or green colors or AlGaAs. * * * * These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/cosmetic defects. * * For optimal intensity performance, please consider our industrial grade displays: * * HDSP-L20x * HDSP-540x * HDSP-L10x * * 5 x 7 dot matrix font Viewable up to 12 meters X-Y stackable Industry standard pin-out 7.6 mm (0.3 in.) Dual-in-Line (DIP) leads on 2.54 mm (0.1 in.) centers Choice of colors Red or Green or AlGaAs Choice of face paint colors Gray or black Design flexibility Common row anode or common row cathode Categorized for luminous intensity Green categorized for color Applications * Suitable for indoor use * Not recommended for industrial applications, i.e., operating temperature requirements exceeding 85C or Below -40C [1] * Extreme temperature cycling not recommended [2] Devices HER HDSP701E 703E 711E 713E Green HDSP701G 703G 711G 713G AlGaAs HDSP701A 703A 711A 713A Description 17.3 mm Gray Surface Common Row Anode 17.3 mm Gray Surface Common Row Cathode 17.3 mm Black Surface Common Row Anode 17.3 mm Black Surface Common Row Cathode Notes: 1. For details, please contact your local Avago components sales office or an authorized distributor. Package Dimensions 12.7 (0.50) MAX. 6.3 (0.25) 10.16 (0.40) 1.3 (0.05) 2.54 (0.10) PIN 1 2.54 (0.10) 17.78 MAX. (0.70) 12.7 (0.50) 15.24 (0.600) 2.54 (0.10) PIN 6 PART NO. COL 1 2 3 4 35 - 1.9 (0.075) 5 ROW 1 8 - 21.8 2 8 - 3 (0.118) 8 - 2.5 (0.098) 3 4 5.1 0.5 (0.201) 12 - 0.5 (0.02) 5 6 7.62 (0.03) 7 NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCE IS 0.25 mm (0.010). 3. FOR GREEN ONLY. Internal Circuit Diagram COMMON ANODE ROW COMMON CATHODE ROW COLUMN 1 ROW 1 2 3 3 10 4 7 COLUMN 5 8 1 ROW 4 2 3 3 7 4 9 5 12 COMMON ROW ANODE HDSP-701E/711E/ PIN 701G/711G/701A/711A COMMON ROW CATHODE HDSP-703E/713E/ PIN 703G/713G/703A/713A 1 2 3 COLUMN 1 CATHODE ROW 3 ANODE COLUMN 2 CATHODE 1 2 3 ROW 1 CATHODE ROW 2 CATHODE COLUMN 2 ANODE 4 5 ROW 5 ANODE ROW 6 ANODE 4 5 COLUMN 1 ANODE ROW 6 CATHODE 6 7 8 ROW 7 ANODE COLUMN 4 CATHODE COLUMN 5 CATHODE 6 7 8 ROW 7 CATHODE COLUMN 3 ANODE ROW 5 CATHODE 1 12 1 1 2 11 2 2 3 2 3 11 4 9 4 10 5 4 5 8 9 10 ROW 4 ANODE COLUMN 3 CATHODE 9 10 COLUMN 4 ANODE ROW 4 CATHODE 6 5 6 5 7 6 7 6 11 12 ROW 2 ANODE ROW 1 ANODE 11 12 ROW 3 CATHODE COLUMN 5 ANODE x = ROW OR COLUMN NUMBER, x = PIN NUMBER HDSP-70XE Internal Circuit Diagram Absolute Maximum Ratings at TA = 25C Parameter Average Power per Dot[1] Peak Forward Current per Dot[1,2] (1/10 Duty Cycle, 0.1 ms Pulse Width) Average Forward Current per Dot[1] Reverse Voltage per Dot Operating Temperature Storage Temperature Wave Soldering Temperature for 3 seconds[3] (1.6 mm [0.063 in.] below Body) HER HDSP-701E/ 711E/703E/ 713E 75 90 AlGaAs HDSP-701A/ 703A/711A/ 713A 75 125 Green HDSP-701G/ 711G/703G/ 713G 75 90 Units mW mA 23 5 -40 to +85 -40 to +85 250 23[3] 5 -40 to +85 -40 to +85 250 15[2] 5 -40 to +85 -40 to + 85 250 mA V C C C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 35C at 0.2 mA/C. 3. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 5 seconds. Optical/Electrical Characteristics at TA = 25C High Efficiency Red Devices HDSP- 701E 711E 703E 713E Parameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength Dominant Wavelength[2] Forward Voltage Symbol IV Min. 1.289 lPEAK ld VF Typ. 2.500 Max. 632 622 2.05 3.40 2.50 Units mcd nm nm V 1.60 Reverse Voltage[3]VR Luminous Intensity Matching Ratio 5 IV-M V 2:1 Test Conditions IF = 50 mA, 20% Duty Factor IF = 20 mA IF = 20 mA IF = 50 mA IF = 20 mA IF = 5 mA IR = 100 A IF = 50 mA 20% Duty Factor Optical/Electrical Characteristics at TA = 25C, continued Green Devices HDSP- 701G 711G 703G 713G Parameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength Dominant Wavelength[2] Forward Voltage Symbol IV Min. 0.96 lPEAK ld VF Max. 568 573 1.80 1.60 Reverse Voltage[3]VR Luminous Intensity Matching Ratio Typ. 2.50 2.25 3.40 2.60 5 Units mcd nm nm V V IV-M 2:1 Test Conditions IF = 50 mA, 20% Duty Factor IF = 20 mA IF = 20 mA IF = 50 mA IF = 20 mA IF = 5 mA IR = 100 A IF = 50 mA 20% Duty Factor AlGaAs Devices HDSP- 701A 711A 703A 713A Parameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength Dominant Wavelength[2] Forward Voltage Symbol IV Min. 1.55 lPEAK ld VF Typ. 2.10 660 643 1.8 Max. 2.0 2.0 Units mcd nm nm V 1.5 Reverse Voltage[3]VR 5 Luminous Intensity Matching Ratio IV-M V 1.5:1 Test Conditions IF = 10 mA, 20% Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IF = 10 mA IF = 5 mA IR = 100 A IF = 10 mA 20% Duty Factor Notes: 1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 2. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 30 GREEN, HER 25 20 15 AlGaAs 10 5 0 0 20 40 60 80 100 IF - FORWARD CURRENT PER SEGMENT - mA IDC - MAXIMUM DC CURRENT PER SEGMENT - mA 35 90 80 70 AlGaAs 60 50 40 30 20 GREEN 10 0 1 AlGaAs 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF - DC FORWARD CURRENT - mA Figure 3. Relative Luminous Intensity vs. DC Forward Current. HDSP-70XE fig 3 40 V - RELATIVE EFFICIENCY (NORMALIZED TO/AT 10 mA PER SEGMENT) RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) GREEN, HER 2.5 4 5 HDSP-70XE fig 2 4.0 3.0 3 Figure 2. Forward Current vs. Forward Voltage. HDSP-70XE fig 1 3.5 2 VF - FORWARD VOLTAGE - V TA - AMBIENT TEMPERATURE - C Figure 1. Maximum Allowable Average Current Per Dot vs. Ambient Temperature. HER 1.4 1.3 RED GREEN 1.2 1.1 1.0 AlGaAs 0.9 0.8 0 10 20 30 40 50 60 70 80 90 100 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 4. Relative Efficiency (Luminous Intensity Per Unit Current Per Dot) vs. Peak Current Per Dot. HDSP-70XE fig 4 Intensity Bin Limits[1] (mcd at 50 mA, 20% Duty Factor) Color Bin Limits (Dominant Wavelength) High Efficiency Red Color Bin Green 2 3 4 5 Dominant Wavelength (nm) Min. Max. 573.6 576.5 570.6 573.5 567.6 570.5 564.5 567.5 Bin name Min.[2] Max.[2] E 1.289 1.934 F 1.934 2.900 G 2.900 4.350 H 4.350 6.525 Bin name Min.[2] Max.[2] H 0.96 1.44 I 1.44 2.15 J 2.15 3.23 Soldering/Cleaning K 3.23 4.85 L 4.85 7.28 Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. Green Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is 10%. (mcd at 10 mA, 20% Duty Factor) Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago representatives for further clarification/information. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. For information on soldering LEDs, please refer to Application Note 1027. AlGaAs Bin name Min.[2] Max.[2] I 1.55 2.33 J 2.33 3.49 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is 10%. For product information and a complete list of distributors, please go to our website: Device Reliability For reliability information, please see the reliability datasheet 17.3 mm General Purpose 5 x 7 Dot Matrix Alphanumeric Displays. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-8400EN AV02-0450EN - May 23, 2007