High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3 SS460S-LP 32312441 Issue F Datasheet Datasheet FEATURES * Fastest response time in its class * No-chopper-stabilization * High sensitivity * Latching magnetics * Wide operating voltage range of 3 Vdc to 24 Vdc * Built-in reverse voltage * Durable design * RoHS-compliant material meets Directive 2002/95 DESCRIPTION The SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, and SS460S-LP High Sensitivity Latching Digital Hall-Effect Sensor ICs are small, sensitive and versatile devices that are operated by the magnetic field from a permanent magnet or an electromagnet. They are designed to respond to alternating North and South poles. The SS360NT is turned on by a North pole while the SS360ST, SS460S, SS460S-T2, SS460S-T3, and SS460S-LP are turned on by a South pole. These sensor ICs offer reliable switching points with a high magnetic sensitivity of 30 G typical (55 G maximum). They do not use chopper stabilization on the Hall element, providing a clean output signal and a faster latch response time when compared to competitive high sensitivity Hall-effect latching sensor ICs which do use chopper stabilization. These products offer reverse polarity protection, deliver a stable output over a -40C to 150C temperature range, and can accept any dc supply voltage from 3 Vdc to 24 Vdc. For brushless dc motor manufacturers who need latching sensors with reliable, consistent performance for more efficient and smaller designs, Honeywell's High Sensitivity Hall-Effect Latching Digital Sensor ICs respond to low magnetic fields and offer consistent repeatability while delivering faster response times to a change in magnetic field for better motor efficiency. These products are available in five package styles: * SS360NT, SS360ST, SS360ST-10K: SOT-23 surfacemount package, pocket tape and reel * SS460S: Flat TO-92-style with straight standard leads, bulk package * SS460S-T2: Flat TO-92-style with formed leads, ammopack tape-in-box * S460S-T3: Flat TO-92-style with straight standard leads, ammopack tape-in-box * SS460S-LP: Flat TO-92-style with straight, long leads, pocket tape and reel Sensing and Internet of Things POTENTIAL APPLICATIONS Industrial/commercial * Brushless dc motor commutation * Speed and RPM sensing in electric motors and fans * Tachometer, counter pickup * Robotics control * Flow-rate sensing for appliances Transportation * Brushless dc motor commutation * Electronic window lift, anti-pinch power window systems * Vehicle convertible roof position Medical * Medical equipment using electric motors PORTFOLIO The SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, SS460S-LP are a part of Honeywell's family of Latching Digital Hall-effect Sensor ICs which also include: * VF360NT, VF360ST, VF460SP * SS360PT, SS460P, SS460P-T2 * SS361CT, SS461C * SS361RT, SS461R * SS400 Series, SS500 (select catalog listings) * VF526DT (dual outputs) High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, SS460S-LP Table 1. Electrical and Environmental Specifications (At Vs = 3.0 Vdc to 24.0 Vdc, 20 mA load, TA = -40C to 150C except where otherwise specified. Characteristic Condition Supply voltage SS360NT, SS360ST, SS360ST-10K SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-T3, SS460S-LP -40C to 125C 150C -- Min. Typ. Max. 3.0 3.0 3.0 -- -- -- 24.0 12.0 24.0 Unit VVdc Supply current Vsupply = 3 Vdc at 25C -- -- -- 3.5 -- 6.0 8.0 mA Output current -- -- -- 20 mA Vsat SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-T3, SS460S-LP Gauss > 55 15 mA, Gauss > 55 -- -- -- -- 0.6 0.6 V Output leakage current Gauss < -55 -- -- 10.0 A Rise/fall time 25C -- -- 1.5 s Thermal resistance: SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-T3, SS460S-LP single layer, single sided PCB -- -- -- 303 233 -- -- C/W Magnetic characteristics: operate (Bop) release (Brp) differential -- -- -- 5 -55 40 30 -30 60 55 -5 80 Operating temperature -- -40 -- 150 C Storage temperature: SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-T3, SS460S-LP -- -- -40 -40 -- -- 150 165 C Soldering temperature and time: SS360NT, SS360ST, SS360ST-10K SS460S, SS460S-T2, SS460S-T3, SS460S-LP infrared reflow process: peak temperature 245C for 10 s max. wave soldering process: 250C to 260C for 3 s max. NOTICE These Hall-effect sensor ICs may have an initial output in either the ON or OFF state if powered up with an applied magnetic field in the differential zone (applied magnetic field >Brp and <Bop). Honeywell recommends allowing 10 s after supply voltage has reached 5 V (SS360NT, SS360ST, SS360ST-10K) or 3 V (SS460S, SS460S-T2, SS460S-T3, SS460S-LP) for the output voltage to stabilize. CAUTION NOTICE The magnetic field strength (Gauss) required to cause the switch to change state (operate and release) will be as specified in the magnetic characteristics. To test the switch against the specified limits, the switch must be placed in a uniform magnetic field. Gauss ELECTROSTATIC SENSITIVE DEVICES DO NOT OPEN OR HANDLE EXCEPT AT A STATIC FREE WORKSTATION ESD SENSITIVITY: CLASS 3a Table 2. Absolute Maximum Specifications Characteristic Min. Typ. Max. Unit V Supply voltage -26.0 -- 26.0 Applied output voltage -0.5 -- 26.0 V Output current -- -- 25 mA Magnetic flux -- -- no limit Gauss NOTICE Absolute maximum ratings are the extreme limits the device will momentarily withstand without damage to the device. Electrical and mechanical characteristics are not guaranteed if the rated voltage and/or currents are exceeded, nor will the device necessarily operate at absolute maximum ratings. 2 Sensing and Internet of Things High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, SS460S-LP Figure 1. Sensor IC Block Diagram VREG VS ESD Clamp OUT + Hall + gm Current Sinking Output C ESD Clamp GND Programming Circuit Figure 2. Typical Magnetic Characteristics vs Ambient Temperature at Supply Voltages 3 Vdc Operate Point 30.0 24 Vdc Operate Point 20.0 Supply Voltage (Vdc) Magnetic Switch Point (Gauss) 40.0 Figure 3. SS360NT, SS360ST, SS360ST-10K Maximum Rated Supply Voltage vs Temperature 10.0 0.0 -10.0 -20.0 24 Vdc Release Point 25 20 15 10 5 0 -30.0 -40 0 3 Vdc Release Point -40.0 -50 -25 0 25 50 125 150 Temperature (C) 75 100 125 150 Ambient Temperature (C) Figure 4. Magnetic Activation SS360NT S N SS360ST, SS360ST-10K N S N S S N SS460S, SS460S-T2, SS460S-T3, SS460S-LP N S S N Label side North pole toward IC: Output = Low South pole toward IC: Output = High South pole toward IC: Output = Low North pole toward IC: Output = High Label side South pole toward IC: Output = Low North pole toward IC: Output = High Sensing and Internet of Things 3 High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, SS460S-LP Figure 5. SS360NT, SS360ST and SS360ST-10K Sensor IC, Tape and Reel Mounting Dimensions (For reference only. mm) SS360NT, SS360ST, SS360ST-10K Pocket Tape SS360NT, SS360ST, SS360ST-10K Sensor IC 2,90 4,00 Nominal IC center 3 Gnd (-) 0,20 N 2,80 1,60 1 Vcc (+) A 2,00 1,75 Top cover tape 0,061 2 Output 0,30 3X 0,50 0,95 1,90 0,413 Nominal to Hall-effect sensing surface 0,77 1,40 Max. 1,20 0,787 0,15 o1,5 4,00 Seating plane SS360NT, SS360ST 178 mm Reel 3,50 8,0 3,20 A 3,15 1,40 Section A-A 0,60 Tape start slot 4,00 10,9 Measured 7,9 at outer edge Access hole greater than 40 at slot location Tape slot depth greater than 10 14,4 Max. Measured at hub o60,0 Hub 2,0 Min. Drive spokes o178 o13,0 Arbor hole o20,2 Min. 8,4 Measured at hub 15,4 Max. Measured at hub SS360ST-10K 330 mm Reel o100,0 Hub 2,2 Min. Drive spokes o20,2 Min. o330 o13,0 Arbor hole 4 Sensing and Internet of Things 8,4 Measured at hub o1,00 Min. High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, SS460S-LP Figure 6. SS460S Sensor IC, SS460S-T2 and SS460S-T3 Sensor IC and Ammopack Tape-in-Box Mounting Dimensions (For reference only. mm) SS460S, SS460S-T3 Sensor IC SS460S-T2 Sensor IC 4,06 4,06 1,57 1,57 2,50 0,46 0,76 2,50 0,76 Sensor IC 0,46 3,00 1,74 Sensor IC 3,00 1,74 3,35 3X 0,56 Max. 15,5 14,4 15,5 14,4 Ground Ground 3X 0,38 3X 0,38 3X 0,38 3X 0,38 2X 2,54 2X 1,27 SS460S-T2 Ammopack Tape-in-Box 1,00 Max. 1,00 Max. 1,00 Max. Output Vs Output Vs 1,00 Max. Adhesive tape Sensor 1 Sensor 24 Sensor 1 0,50 Max. 6,00 Fold 11,00 20,00 9,00 18,00 Fold 6,35 0,55 Max. 1,42 Max. 12,70 SS460S-T3 Ammopack Tape-in-Box o4,00 1,00 Max. 1,00 Max. 1,00 Max. 1,00 Max. Adhesive tape Sensor 1 Sensor 24 0,50 Max. 11,00 Sensor 1 6,00 Fold 20,00 9,00 18,0 Fold 0,55 Max. 1,42 Max. 6,35 12,70 o4,00 Note: Ensure the minimum hole size in the PCB is 0,68 mm dia. based on the IPC 2222 Level B standard. Sensing and Internet of Things 5 High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, SS460S-LP Figure 7. SS460-LP Sensor IC, Tape and Reel Mounting Dimensions (For reference only. mm) SS460-LP Sensor IC SS460-LP Pocket Tape 4,06 8,00 1,57 2,50 0,76 1,74 2,00 4,00 A 0,43 Sensor IC o1,50 1,75 3,00 14,20 32,00 3X 0,56 Max. B B 15,75 1,85 6,20 Elongated sprocket hole A Ground Vs Output 0,30 1,90 3X 0,38 3X 0,38 3,20 19,70 4,30 Section A-A Section B-B 2X 1,27 o330,20 Unreel direction - Branded face outward - Device body on left side - Elongated sprocket holes on left side - Pin 1 on leading device edge Sensing and Internet of Things 3,50 1,50 SS460-LP 330 mm Reel 6 o2,00 1,50 16,00 High Sensitivity Latching Digital Hall-effect Sensor ICs: SS360NT, SS360ST, SS360ST-10K, SS460S, SS460S-T2, SS460S-T3, SS460S-LP Table 3. Order Guide Catalog Listing Description SS360NT High sensitivity latching digital Hall-effect sensor IC, North pole activated, SOT-23 package, pocket tape and reel packaging, 3000 units/reel SS360ST High sensitivity latching digital Hall-effect sensor IC, South pole activated, SOT-23 package, pocket tape and reel packaging, 3000 units/reel SS360ST-10K High sensitivity latching digital Hall-effect sensor IC, South pole activated, SOT-23 package, pocket tape and reel packaging, 10,000 units/reel SS460S High sensitivity latching digital Hall-effect sensor IC, South pole activated, flat TO-92-style package, straight standard leads, bulk packaging, 1000 units/bag SS460S-T2 High sensitivity latching digital Hall-effect sensor IC, South pole activated, flat TO-92-style package, formed leads, ammopack tape-in-box packaging, 5000 units/box SS460S-T3 High sensitivity latching digital Hall-effect sensor IC, South pole activated, flat TO-92-style package, straight standard leads, ammopack tape-in-box packaging, 5000 units/box SS460S-LP High sensitivity latching digital Hall-effect sensor IC, South pole activated, flat TO-92-style package, straight long leads, pocket tape and reel packaging, 3000 units/reel Sensing and Internet of Things 7 ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product line guide * Product range guide * Product installation instructions * Application sheet: - Magnetic Position Sensing in Brushless DC Electric Motors * Technical notes: - Achieving High Sensitivity and Magnetic Stability without the Use of Chopper Stabilization in Bipolar Latching Hall-Effect Sensors for Brushless DC Motor Applications - How to Select Hall-Effect Sensors for Brushless DC Motors WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * * The information presented in this datasheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. For more information Honeywell Sensing and Internet of Things services its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or the While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. nearest Authorized Distributor, visit sensing.honeywell.com or call: Asia Pacific +65 6355-2828 Europe +44 (0) 1698 481481 USA/Canada +1-800-537-6945 Honeywell Sensing and Internet of Things 9680 Old Bailes Road Fort Mill, SC 29707 www. honeywell.com 32312441-F-EN | F | 04/19 (c) 2019 Honeywell International Inc. All rights reserved.