PA eee eee) wo \y, | x Uae AMPTRAC Analyzer I/O Cable Assemblies Analyzer I/O Cable Assemblies Product Facts : AMPTRAC Connectivity Management System I/O Cable Assemblies are available with the following connectors -- DB25 connector (on Analyzer) ~ 2.0 mm AMPMODU connector (used with the Analyzer DB25 adapter 149964 1-1} -- 2.0 mm AMPMODU (on sensor strips and shielded patch panels) - 6-postion modular plug (RJ 11) (on MT-RJ and LC Duplex MPO cassettes) - 6-postion 2.54 MTE connector (on Duplex SC adapter plates and MPO cassettes} -- HD22 connector (on MRJ21 and shielded patch panels) - 110 Plug and Play connector (on AMPTRAC UTP SL Series patch panels) :. All 24-conductor I/O cables come with molded boots on both ends : Alll/O cables come with molded boots on the analyzer connector end :: 1/0 Cable Assemblies are Non-Plenum (CM rated) and Listed Monitored Device Connector End 1 (Figure) Connector End 2 (Figure) Application Number of Part Conductors Number - None, used for IDC (B) Cat 5e, Cat 6, MT-RJ, LC 24 1435844-X AMPTRAC Patch Panel DB26 - Analyzer (A) 110 - Plug & Play (C) Cat 5e, Cat 6, MT-RJ, LC 24. 1499656-Y PCB Sensor DB25 - Analyzer (A) Over Molded 2.0 mm, AMPMODU (D) LAN Switches, Cat6 Shielded 24 1435845-Y MRJ21 Patch Panel DB25 - Analyzer (A) HD22 (E) MRJ21, Cat 6 Shielded 24 1499507-Y 16 *1499686-Y_ . . . . 12 *1499687-Y PCB Sensor *Single 2.0 mm, AMPMODU (F) Single 2.0 mm, AMPMODU(F) LAN Switches, Cat6 Shielded 8 *1499688-)_ 6 *1499689-Y Cassettes *Single 2.0 mm, AMPMODU (F) 6-Position, RJ11 (G) MT-RJ, LC 6 *1499684-Y Duplex SC Adapter Plates *Single 2.0 mm, AMPMODU F) 28 mam MITE (H) Duplex St Adapter Plates 6 *1499685-Y | PCB Sensor *Single 2.0 mm,AMPMODU (F} Single 2.0 mm, AMPMODU(F) | LAN Switches, Cat6 Shielded 2 *1499690-Y | X denotes length in feet: -7 = 7, 1--4 = 14, 5--0 = 50, 9--9 = 100 (Note: Can be cut to length} | Y denotes length in feet: -4 = 4, -7=7, 1--O= 10, 1--4= 14, 2--5 = 25, 5--0 = 50, 7--5 = 75, 9--9= 100 | *NOTE: Use with DB25 Adapter P/N: 149964 1-1 to connect monitored device to AMPTRAC Analyzer. Adapter, DB25 to 2.0 mm AMPMODU Product Facts PART NUMBER 1499641-1 ee :. For use with 2.0 mm AMPMODU connectors less than 24 position (Single 2.0 mm AMPMODU) :. Allows for side-by-side connections of multiple Single 2.0 mm AMPMODU connectors :, Allows for use of all analyzer ports : Built-in strain relief and cable management Back Detail - 24 Position 2.0 mm AMPMODU 110 Plug and Play Kit Product Facts PART NUMBER 1479960-1 :: Used with I/O Cable Assembly part number 1435844 :. Easy to lace and field terminate (no special tools required) : :: Built-in latches and orientation features 110 Plug and Play Kit As Shipped 1 101 Plug and Play Kit Assembled eeseseeeeeoeeeeoeaeeoeeeoeeeoee Seeeeeeeceeseeeeeeeeeeeeeeseeeeeeaeseeeeeeeeeeseeeseeeonoeneeoeonene AP, AMP NETCONNECT, AMPMODU, AMPTRAC, NETCONNECT and TYCO are trademarks. . : ner products, logos and Company names mentioned herein may be trademarks of their respective owners. For more information, call 1 -800-553-0938 ecificatians and product details subject to change without notice, www.ampnetconnect.com