SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
1
Product Facts
■SOLISTRAND
Terminals and Splices
■Utilize a brazed seam
■Applied with “W” crimp
tooling
■Available in wire sizes
26 AWG– 600 MCM
[0.1–304 mm2]
■For terminating solid
& stranded wires
■U.L. Listed
CSA Certified
Military Approved
■Budget
Terminals and Splices
■Utilize a butted seam
■Applied with “F” crimp
tooling
■Availble in wire
sizes 26– 10 AWG
[0.1–6.64 mm2]
■For terminating stranded
wire only
■U.L. Listed
■DIAMOND GRIP
Terminals and Splices
■Utilize a butted seam
■Metal insulation support
sleeve with “V” notches
■Applied with a “C” crimp
■Available in wire sizes
26-10 AWG (0.1-6.64 mm2)
■For terminating stranded
wire only
■U.L. Listed
CSA Certified
SOLISTRAND and Budget
terminals and splices are
specially designed to termi-
nate solid and stranded
wire, irregular shaped con-
ductors, and combinations
of these — retaining the
superior performance char-
a c t e r i s t i c s of single-purpose
terminals and splices.
Corrosion resistance, vibra-
tion resistance and tensile
strength of these terminals
and splices are well within
the limits of commercial and
military specifications.
The Budget terminal is
primarily the same as the
SOLISTRAND terminals
without the brazed seam
in the wire barrel. These
terminals and splices fulfill
the need for an economical
and electrically superior ter-
mination where extreme
vibration and tension on the
wires are not present.
DIAMOND GRIP utilizes a
tin plated copper insulation
support sleeve with “V”
notches. The sleeve elimi-
nates fraying of the insula-
tion or breaking of the con-
ductor. The “V” notches
lock the wire insulation
against vibration and
pullout.
Need more information?
Call the AMP Technical
Support Center:
1-800-522-6752
The Technical Support
Center is staffed with spe-
cialists well versed in all
AMP Products. The Center
can provide you with:
■Technical Support
■Catalogs
■Technical Documents
■Product Samples
■AMP Authorized
Distributor Locations
© Copyright 1994, 1996 and 2000 by
AMP Incorporated, Harrisburg, PA.
All Rights Reserved.
AMP, AMPOMATOR, A M P - O - L E C T R I C ,
AMP-TAPETRONIC, C E R T I - C R I M P ,
DIAMOND GRIP, PRO-CRIMPER II,
SOLISTRAND, TAPETRONIC and
DYNA-CRIMP are trademarks.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
2
Table of Contents
How to Compute Circular
Mil Area of Various Wire Shapes ............................................................................................3
Table of SOLISTRAND and Budget Standard Wire Ranges ..................................................3
Table listing: Circular Mil Area for common wire sizes......................................................4 – 7
Product Descriptions ....................................................................................................8, 9, 10
Stud Hole Sizes ....................................................................................................................11
SOLISTRAND and Budget
Ring Tongue Terminals...........................................................................................12– 20
26 AWG – 600 MCM [0.1– 304 mm2]
Right Angle Ring Tongue Terminals............................................................................21
22 AWG – 300 MCM [0.26– 152 mm2]
Heavy Duty Ring Tongue Terminals ......................................................................22, 23
16 – 1/0 AWG [1.04 – 60.6 mm2]
Rectangular Tongue Terminals ..............................................................................24, 25
22 – 10 AWG [0.26 – 6.64 mm2]
Spade Tongue Terminals ..............................................................................................26
26 – 10 AWG [0.1 – 6.64 mm2]
Short Spring Spade Tongue Terminals ................................................................27, 28
26 – 10 AWG [0.1 – 6.64 mm2]
Long Spring Spade Tongue Terminals .......................................................................29
26 – 10 AWG [0.1 – 6.64 mm2]
Flanged Spade Tongue Terminals ..............................................................................30
26 – 10 AWG [0.1 – 6.64 mm2]
Slotted Ring Tongue Terminals ...................................................................................31
26 – 10 AWG [0.1 – 6.64 mm2]
Hook Tongue Terminals................................................................................................32
22 – 10 AWG [0.26 – 6.64 mm2]
Tab Tongue Terminals...................................................................................................32
22 – 8 AWG [0.26 – 10.5 mm2]
Flag Ring Tongue Terminals...................................................................................33, 34
16 – 4/0 AWG [1.04 – 117 mm2]
Parallel Splices...............................................................................................................35
22 AWG– 600 MCM [0.26 – 304 mm2]
Butt Splices ..............................................................................................................36, 37
26 AWG – 600 MCM [0.1 – 304 mm2]
DIAMOND GRIP
Ring Tongue Terminals...........................................................................................38, 39
26 – 10 AWG [0.1– 6.64 mm2]
Knife Disconnect Splices..............................................................................................40
22 – 10 AWG [0.26 – 6.64 mm2]
Slotted Ring Tongue......................................................................................................40
26 – 16 AWG [0.1 – 1.65 mm2]
Rectangular Tongue Terminals ....................................................................................41
22 – 16 AWG [0.26 – 1.65 mm2]
Flanged Spade Tongue Terminals ..............................................................................41
26 – 14 AWG [0.1 – 2.62 mm2]
Spade Tongue Terminals .............................................................................................42
26 – 16 AWG [0.1 – 1.65 mm2]
Standard “B”
Knife Disconnect Splices..............................................................................................43
22 – 8 AWG [0.26 – 10.5 mm2]
Rectangular Tongue Terminals ....................................................................................43
22 – 14 AWG [0.26 – 2.62 mm2]
Military Approvals, Part Numbers & Requirements ......................................................44 – 48
U.L. Requirements..........................................................................................................49, 50
Application Tooling ........................................................................................................51– 56
Part Number Index .........................................................................................................57– 59
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
3
How to Compute Circular Mil Area of Various Wire Shapes
Square or Rectangular Wire
Round Solid Wire AWG
Stranded Wire AWG
U.S. Customary Dimensions
Multiply the width of the wire cross section
in mils by the thickness of the wire cross
section in mils by 1.2732 and subtract the
radius factor shown below.
CMA = W x T x 1.2732 – radius factor
Multiply the diameter in mils by itself.
CMA = D2
Multiply the diameter of one strand (in mils)
by itself, and then multiply the result by the
total number of strands.
CMA = D2x N
Metric Dimensions
Multiply the width of the wire cross section in
millimetres by the thickness of the wire cross
section in millimetres by 1973.525 and sub-
tract the radius factor shown below.
CMA = W x T x 1973.525 – radius factor
Multiply the diameter in milllimetres by itself
by 1550.003
CMA = D2x 1550.003
Multiply the diameter of one strand in mil-
limetres by itself by the number of strands
by 1550.003.
CMA = D2x N x 1550.003
Radius Factor, U.S. Customary
Radius Radius Factor
(in.) To Subtract
(CMA)
.010 110
.012 158
.016 280
.020 438
.026 740
.032 1121
.040 1752
.063 4346
.094 9675
Radius must be measured.
Conversion Table
To
Convert To Multiply By
From
CMA mm2.0005067075
CMA in2.0000007854
mm2in2.001550003
mm2CMA 1973.525
Note: Refer to table listing for circu-
lar mil area for common wire sizes.
Radius Factor, Metric
Radius Radius Factor
(mm) To Subtract
(CMA)
0.25 106
0.3 153
0.35 208
0.4 272
0.5 424
0.6 611
0.8 1086
1.2 2444
Radius must be measured.
Table of SOLISTRAND and Budget Standard Wire Ranges
Use to select the proper size terminals or splices.
Terminal Connector CMA Range
Size
26–22 202–810
24–20 320–1,290
22–16 509–3,260
16–14 & 16–14 HD 2,050–5,180
14–12 3,260–8,230
12–10 5,180–13,100
8 & 8 HD 13,100–20,800
6 & 6 HD 20,800–33,100
4 & 4 HD 33,100–52,600
HD-Denotes Heavy Duty Terminal.
Terminal Connector CMA Range
Size
2 & 2 HD 52,600–83,700
1/0 & 1/0 HD 83,700–119,500
2/0 119,500–150,500
3/0 150,500–190,000
4/0 190,000–231,000
250–300 MCM 231,000–300,000
300–350 MCM 300,000–380,000
400 MCM 350,000–478,000
500–600 MCM 478,000–600,000
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
4
Computing Circular
Mil Area
For best results, the proper
AMP terminal or splice must be
selected not by the “fit” of wire or
wires in the terminal barrel, but
by the total circular mil area in
cross section of the wires used.
For this purpose AMP has pre-
pared convenient tables to assist
in the calculation of circular mil
areas. When the totals are
known, the proper AMP terminal
or splice can be determined
q u i c k l y .
Unusual combinations or special
applications should be submitted
to AMP engineering department
for size recommendation. In any
application, the careful selection
of terminals by the circular mil
area method will insure the high-
est possible performance, both
electrically and mechanically, in
your AMP terminations.
Example of multiple wire
configurations used in one
termination
ALWAYS SELECT TERMINALS
BY THE CIRCULAR MIL AREA
METHOD. For example, a No.
18 AWG 16-strand conductor
(1600 CMA) and a No. 16 AWG
19-strand conductor (2426
CMA) will have a combined total
of 4026 CMA. This total CMA is
equivalent to a No. 14 AWG
c o n d u c t o r .
Wire Sizes in AWG
and mm2to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
Nominal Strands Approximate
CMA Wire Size No. Diameter Conductor Diameter
AWG mm2Inch mm Inch mm
3.8 44 0.002 1 0.00195 0.050 0.002 0.051
4.0 44 0.002 1 0.002 0.051 0.002 0.051
4.8 43 0.002 1 0.0022 0.056 0.0022 0.056
6.3 42 0.003 1 0.0025 0.064 0.0025 0.064
7.8 41 0.004 1 0.0028 0.071 0.0028 0.071
9.6 40 0.005 1 0.0031 0.079 0.0031 0.079
12.3 39 0.006 1 0.0035 0.089 0.0035 0.089
15.2 38 0.008 1 0.0039 0.099 0.0039 0.099
16.0 38 0.008 1 0.004 0.102 0.004 0.102
20.2 37 0.010 1 0.0045 0.114 0.0045 0.114
25.0 36 0.013 1 0.005 0.127 0.005 0.127
31.4 35 0.016 1 0.0056 0.142 0.0056 0.142
39.7 34 0.020 1 0.0063 0.160 0.0063 0.160
50.0 33 0.025 1 0.00707 0.180 0.0071 0.180
50.4 33 0.026 1 0.0071 0.180 0.0071 0.180
64.0 32 0.032 1 0.008 0.203 0.008 0.203
79.2 31 0.040 1 0.0089 0.226 0.0089 0.226
100.0 30 0.051 1 0.01 0.254 0.01 0.254
104.0 30 0.053 26 0.002 0.051 0.012 0.305
127.7 29 0.064 1 0.0113 0.287 0.011 0.279
152.1 29 0.077 10 0.0039 0.099 0.013 0.330
158.8 29 0.080 1 0.0126 0.320 0.013 0.330
175.0 28 0.089 7 0.005 0.127 0.015 0.381
182.6 28 0.093 19 0.0031 0.079 0.016 0.406
202 27 0.102 1 0.0142 0.361 0.014 0.356
204 27 0.103 51 0.002 0.051 0.016 0.406
238 26 0.121 6 0.0063 0.160 0.018 0.457
250 26 0.127 26 0.0031 0.079 0.018 0.457
250 26 0.127 10 0.005 0.127 0.018 0.457
251 26 0.127 8 0.0056 0.142 0.018 0.457
253 26 0.128 1 0.0159 0.404 0.016 0.406
256 26 0.130 16 0.004 0.102 0.018 0.457
274 26 0.139 18 0.0039 0.099 0.022 0.558
278 26 0.141 7 0.0063 0.160 0.019 0.483
288 26 0.146 72 0.002 0.051 0.022 0.559
300 26 0.152 3 0.01 0.254 0.02 0.508
304 26 0.154 19 0.004 0.102 0.02 0.508
313 25 0.159 1 0.0177 0.450 0.018 0.457
314 25 0.159 10 0.0056 0.142 0.02 0.508
318 25 0.161 8 0.0063 0.160 0.021 0.533
320 25 0.162 1 0.0179 0.455 0.018 0.457
388 24 0.197 1 0.0197 0.500 0.02 0.508
397 24 0.201 10 0.0063 0.160 0.023 0.584
400 24 0.203 16 0.005 0.127 0.023 0.584
400 24 0.203 4 0.01 0.254 0.023 0.584
403 24 0.204 8 0.0071 0.180 0.023 0.584
404 24 0.205 1 0.0201 0.511 0.02 0.508
408 24 0.207 13 0.0056 0.142 0.023 0.584
408 24 0.207 102 0.002 0.051 0.02 0.508
475 24 0.241 19 0.005 0.127 0.023 0.584
634 22 0.321 8 0.0089 0.226 0.029 0.737
635 22 0.322 16 0.0063 0.160 0.029 0.737
640 22 0.324 10 0.008 0.203 0.029 0.737
640 22 0.324 1 0.0253 0.643 0.025 0.635
650 22 0.329 26 0.005 0.127 0.033 0.838
700 22 0.355 7 0.01 0.254 0.03 0.762
754 22 0.382 19 0.0063 0.160 0.033 0.838
812 21 0.411 1 0.0285 0.724 0.029 0.737
992 20 0.503 1 0.0315 0.800 0.032 0.813
1000 20 0.507 10 0.01 0.254 0.038 0.965
1008 20 0.511 20 0.0071 0.180 0.039 0.991
1024 20 0.519 16 0.008 0.203 0.039 0.991
1024 20 0.519 1 0.032 0.813 0.032 0.813
1024 20 0.519 256 0.002 0.051 0.039 0.991
1025 20 0.519 41 0.005 0.127 0.038 0.965
1032 20 0.523 26 0.0063 0.160 0.039 0.991
1111 20 0.563 7 0.0126 0.320 0.039 0.991
1186 20 0.601 19 0.0079 0.201 0.041 1.041
1289 19 0.653 1 0.0359 0.912 0.036 0.914
1492 18.5 0.756 7 0.0146 0.371 0.047 1.194
1512 18.5 0.766 30 0.0071 0.180 0.047 1.194
1536 18.5 0.778 384 0.002 0.051 0.047 1.194
1536 18.5 0.778 24 0.008 0.203 0.047 1.194
1600 18 0.811 16 0.01 0.254 0.049 1.245
1608 18 0.815 19 0.0092 0.234 0.049 1.245
Nominal Strands Approximate
CMA Wire Size No. Diameter Conductor Diameter
AWG mm2Inch mm Inch mm
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
5
Wire Sizes in AWG
and mm2to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
1617 18 0.819 7 0.0152 0.386 0.042 1.067
1624 18 0.823 1 0.0403 1.024 0.04 1.016
1625 18 0.823 65 0.005 0.127 0.04 1.016
1627 18 0.824 41 0.0063 .0160 0.049 1.245
1639 18 0.830 7 0.0153 0.389 0.042 1.067
1770 18 0.897 7 0.0159 0.404 0.048 1.219
1900 18 0.963 19 0.01 0.254 0.052 1.321
1980 17 1.003 1 0.0445 1.130 0.045 1.143
1999 17 1.013 7 0.0169 0.429 0.047 1.194
2048 17 1.038 32 0.008 0.203 0.047 1.194
2048 17 1.038 512 0.002 0.051 0.049 1.245
2052 17 1.040 1 0.0453 1.151 0.045 1.143
2426 16 1.229 19 0.0113 0.287 0.061 1.549
2521 16 1.277 50 0.0071 0.180 0.059 1.499
2540 16 1.287 16 0.0126 0.320 0.059 1.499
2580 16 1.307 65 0.0063 0.160 0.059 1.499
2581 16 1.308 1 0.0508 1.290 0.051 1.295
2600 16 1.317 26 0.01 0.254 0.061 1.549
2625 16 1.330 105 0.005 0.127 0.059 1.499
2800 16 1.419 7 0.02 0.508 0.061 1.549
2942 15.5 1.491 7 0.0205 0.521 0.059 1.499
2948 15.5 1.494 1 0.0543 1.379 0.054 1.372
3000 15.5 1.520 30 0.01 0.254 0.059 1.499
3073 15.5 1.557 392 0.0028 0.071 0.061 1.549
3260 15 1.652 1 0.0571 1.450 0.057 1.448
3831 14 1.941 19 0.0142 0.361 0.076 1.930
3899 14 1.976 7 0.0236 0.599 0.071 1.803
4079 14 2.067 37 0.0105 0.267 0.073 1.854
4099 14 2.077 7 0.0242 0.615 0.076 1.930
4100 14 2.077 41 0.01 0.254 0.077 1.956
4106 14 2.081 19 0.0147 0.373 0.076 1.930
4109 14 2.082 1 0.0641 1.628 0.064 1.626
4128 14 2.092 26 0.0126 0.320 0.075 1.905
4167 14 2.111 105 0.0063 0.160 0.073 1.854
4234 14 2.145 84 0.0071 0.180 0.074 1.880
4802 13.5 2.433 50 0.0098 0.249 0.087 2.210
4842 13.5 2.453 7 0.0263 0.668 0.079 2.007
4914 13.5 2.490 1 0.0701 1.781 0.07 1.778
5184 13 2.627 1 0.072 1.829 0.072 1.829
6088 12 3.085 19 0.0179 0.455 0.096 2.438
6343 12 3.214 165 0.0062 0.157 0.095 2.413
6475 12 3.281 259 0.005 0.127 0.105 2.667
6500 12 3.294 65 0.01 0.254 0.096 2.438
6503 12 3.295 19 0.0185 0.470 0.092 2.337
6509 12 3.298 41 0.0126 0.320 0.094 2.388
6512 12 3.300 7 0.0305 0.775 0.086 2.184
6529 12 3.308 1 0.0808 2.052 0.081 2.057
6545 12 3.316 37 0.0133 0.338 0.093 2.362
6654 12 3.372 84 0.0089 0.226 0.094 2.388
6946 11.5 3.520 7 0.0315 0.800 0.094 2.388
7856 11.5 3.981 7 0.0335 0.851 0.1 2.540
7985 11.5 4.046 19 0.0205 0.521 0.101 2.565
8064 11.5 4.086 56 0.012 0.305 0.102 2.591
8226 11 4.168 1 0.0907 2.304 0.091 2.311
9072 10 4.597 7 0.036 0.914 0.096 2.438
9472 10 4.799 37 0.016 0.406 0.109 2.769
10080 10 5.108 1 0.1004 2.550 0.1 2.540
10319 10 5.229 37 0.0167 0.424 0.109 2.769
10319 10 5.229 65 0.0126 0.320 0.118 2.997
10365 10 5.252 41 0.0159 0.404 0.122 3.099
10376 10 5.258 7 0.0385 0.978 0.096 2.438
10384 10 5.262 1 0.1019 2.588 0.102 2.591
10404 10 5.272 19 0.0234 0.594 0.117 2.972
10500 10 5.320 105 0.01 0.254 0.116 2.946
10867 10 5.506 7 0.0394 1.001 0.118 2.997
11696 10 5.926 84 0.0118 0.300 0.13 3.302
11710 10 5.933 7 0.0409 1.039 0.128 3.251
11816 10 5.987 1 0.1087 2.761 0.109 2.769
12066 10 6.114 19 0.0252 0.640 0.126 3.200
13087 9 6.5 1 0.1144 2.91 0.114 2.90
13125 9 7 525 .0050 0.13 0.140 3.56
14175 8 7 7 .0450 1.14 0.146 3.71
14368 8 7.5 19 .0275 0.70 0.145 3.68
15595 8 8 7 .0472 1.20 0.142 3.60
15665 8 8 50 .0177 0.45 0.146 3.70
Nominal Strands Approximate
CMA Wire Size No. Diameter Conductor Diameter
AWG mm2Inch mm Inch mm
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
6
Wire Sizes in AWG
and mm2to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
16387 8 8 133 .0111 0.28 0.167 4.24
16473 8 8 37 .0211 0.54 0.150 3.81
16512 8 8 1 .1285 3.26 0.129 3.26
16533 8 8 7 .0486 1.23 0.146 3.71
16535 8 8 19 .0295 0.75 0.148 3.76
16589 8 8 49 .0184 0.47 0.150 3.81
16983 8 8.5 133 .0113 0.29 0.167 4.24
18853 7 10 19 .0315 0.80 0.161 4.10
19719 7 10 80 .0157 0.40 0.165 4.20
19737 7 10 7 .0531 1.35 0.159 4.05
19768 7 10 1 .1406 3.57 0.141 3.57
19796 7 10 49 .0201 0.51 0.161 4.10
26179 6 13 37 .0266 0.68 0.174 4.42
26218 6 13 7 .0612 1.55 0.184 4.67
26244 6 13 1 .1620 4.11 0.162 4.11
26292 6 15 19 .0372 0.94 0.202 5.13
26818 6 14 133 .0142 0.36 0.210 5.33
27783 6 14 7 .0630 1.60 0.189 4.80
31057 5.5 16 126 .0157 0.400 0.209 5.30
31329 5.5 16 7 .0669 1.700 0.197 5.00
31400 5.5 16 1 .1772 4.500 0.177 4.50
32199 5 16 37 .0295 0.750 0.197 5.00
33088 5 15.5 1 .1819 4.620 0.182 4.62
40682 4.5 20 41 .0315 0.800 0.236 6.00
41616 4 21 1 .2040 5.182 0.204 5.18
41718 4 21 7 .0772 1.961 0.232 5.89
41771 4 21 37 .0336 0.853 0.240 6.10
41792 4 21 19 .0469 1.191 0.226 5.74
42615 4 21 133 .0179 0.455 0.272 6.90
43356 3.5 22 7 .0787 2.000 0.236 6.00
48312 3 25 196 .0157 0.400 0.260 6.60
48867 3 25 783 .0079 0.200 0.280 7.10
49745 3 25 7 .0843 2.140 0.253 6.42
50010 3 25 84 .0244 0.620 0.260 6.60
57205 2.5 34 7 .0904 2.296 0.292 7.42
57459 2.5 30 7 .0906 2.300 0.272 6.90
66049 2 34 1 .2570 6.528 0.257 6.53
66139 2 34 19 .0590 1.499 0.332 8.43
66500 2 35 665 .0100 0.254 0.345 8.76
66517 2 34 37 .0424 1.077 0.300 7.62
68031 2 35 276 .0157 0.400 0.307 7.80
68857 2 35 19 .0602 1.530 0.301 7.65
69088 2 35 1107 .0079 0.200 0.335 8.50
73400 1.5 38 7 .1024 2.600 0.307 7.80
81700 1 41 817 .0100 0.254 0.382 9.70
83600 1 42 836 .0100 0.254 0.386 9.80
84341 1 40 85 .0315 0.800 0.339 8.60
95509 0 50 19 .0709 1.800 0.354 9.00
97610 0 50 396 .0157 0.400 0.406 10.30
98409 0 50 702 .0118 0.300 0.370 9.40
104500 0 53 1045 .0100 0.254 0.431 10.95
106400 0 54 1064 .0100 0.254 0.435 11.05
117680 0 60 19 .0787 2.000 0.394 10.00
133000 00 67 1330 .0100 0.254 0.486 12.34
135023 00 70 19 .0843 2.140 0.421 10.70
139101 00 70 999 .0118 0.300 0.488 12.40
139712 00 70 360 .0197 0.500 0.488 12.40
155959 000 80 19 .0906 2.300 0.453 11.50
167200 000 85 1672 .0100 0.254 0.545 13.84
184343 000 95 475 .0197 0.500 0.571 14.50
185468 000 95 1332 .0118 0.300 0.571 14.50
186972 000 95 19 .0992 2.520 0.496 12.60
199229 0000 100 19 .1024 2.600 0.512 13.00
210900 0000 105 2109 .0100 0.254 0.635 16.13
235959 0000 120 608 .0197 0.500 0.630 16.00
236208 0000 120 37 .0799 2.030 0.571 14.50
247791 0000 125 19 .1142 2.900 0.571 14.50
249856 250 127 61 .0640 1.623 0.576 14.63
249864 250 127 91 .0524 1.331 0.576 14.63
249870 250 127 12 .1443 3.665 0.600 15.24
249966 250 127 19 .1147 2.913 0.574 14.58
250003 250 127 37 .0822 2.088 0.575 14.61
299700 300 152 37 .0900 2.29 0.630 16.0
299755 300 152 61 .0701 1.781 0.631 16.03
299823 300 152 91 .0574 1.458 0.631 16.03
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Table listing: Circular Mil Area for common wire sizes (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
7
Wire Sizes in AWG
and mm2to CMA
Note: The following tables are
applicable to single and
multiple strand, round,
conductors only.
299947 300 152 12 .1581 4.016 0.657 14.66
300209 300 152 19 .1257 3.193 0.629 15.98
349560 350 177 61 .0757 1.923 0.681 17.3
349804 350 177 91 .0620 1.575 0.682 17.32
349875 350 177 19 .1357 3.447 0.679 17.25
350072 350 177 12 .1708 4.338 0.710 18.03
350290 350 177 37 .0973 2.471 0.681 17.3
400026 400 203 19 .1451 3.686 0.726 18.44
400192 400 203 37 .1040 2.642 0.728 18.49
400221 400 203 61 .0810 2.057 0.729 18.49
400008 400 203 91 .0663 1.684 0.729 18.49
499868 500 253 19 .1622 4.12 0.811 20.6
499590 500 253 37 .1162 2.951 0.813 20.65
499605 500 253 61 .0905 2.299 0.815 20.7
499664 500 253 91 .0741 1.882 0.815 20.7
599401 600 304 127 .0687 1.745 0.893 22.68
599596 600 304 37 .1273 3.233 0.891 22.63
600003 600 304 91 .0812 2.062 0.893 22.68
600279 600 304 61 .0992 2.52 0.893 22.68
699216 700 355 127 .0742 1.885 0.965 24.51
699531 700 355 37 .1375 3.493 0.963 24.46
699695 700 355 61 .1071 2.72 0.964 24.49
699907 700 355 91 .0877 2.228 0.965 24.51
750227 750 405 61 .1109 2.817 0.998 25.35
750262 750 405 91 .0908 2.306 0.999 25.37
750277 750 405 37 .1424 3.617 0.997 25.32
749096 750 405 127 .0768 1.951 0.998 25.35
799533 800 456 37 .1470 3.734 1.029 26.14
799725 800 456 61 .1145 2.908 1.031 26.19
800654 800 456 127 .0794 2.017 1.032 26.21
800658 800 456 91 .0938 2.383 1.032 26.21
999197 1000 507 127 .0887 2.253 1.153 29.29
999424 1000 507 61 .1280 3.251 1.152 29.26
999457 1000 507 91 .1048 2.662 1.153 29.29
1000012 1000 507 37 .1644 4.176 1.151 29.24
Nominal Strands Approximate
CMA Wire Size No. Diameter Conductor Diameter
AWG mm2Inch mm Inch mm
Chart 2 (Solid Wire)
U.S. Customary Dimensions
Use to convert wire size to inches of diameter and CMA. To
read mils direct, move decimal point three places to the right.
AWG Dia. CMA* AWG Dia. CMA*
inches inches
4/0 .460 212,000 19 .036 1,290
3/0 .410 168,000 20 .032 1,020
2/0 .365 133,000 21 .0285 810
1/0 .325 106,000 22 .0253 642
1 .289 83,700 23 .0226 509
2 .258 66,400 24 .0201 404
3 .229 52,600 25 .0179 320
4 .204 41,700 26 .0159 254
5 .182 33,100 27 .0142 202
6 .162 26,300 28 .0126 160
7 .144 20,800 29 .0113 127
8 .128 16,500 30 .0100 101
9 .114 13,100 31 .0089 79.7
10 .102 10,400 32 .0080 63.2
11 .091 8,230 33 .0071 50.1
12 .081 6,530 34 .0063 39.8
13 .072 5,180 35 .0056 31.5
14 .064 4,110 36 .0050 25.0
15 .057 3,260 37 .0045 19.8
16 .051 2,580 38 .0040 15.7
17 .045 2,050 39 .0035 12.5
18 .040 1,620 40 .0031 9.9
Metric Dimensions
Use to convert wire size to millimeters of diameter and CMA.
mm2Dia. CMA* mm2Dia. CMA*
mm mm
113.1 12 223,000 0.6362 0.9 1,260
78.54 10 155,000 0.5027 0.8 992
63.62 9 125,000 0.3848 0.7 759
50.27 8 99,200 0.3318 0.65 655
38.48 7 75,900 0.2827 0.6 558
33.18 6.5 65,500 0.2376 0.55 469
28.27 6 55,800 0.1964 0.5 338
23.76 5.5 46,900 0.159 0.45 314
19.64 5 38,800 0.1257 0.4 248
15.90 4.5 31,400 0.09621 0.35 190
12.57 4 24,800 0.08042 0.32 159
9.621 3.5 19,000 0.06605 0.29 130
8.042 3.2 15,900 0.05309 0.26 105
6.605 2.9 13,000 0.04155 0.23 82
5.309 2.6 10,500 0.03142 0.2 62
4.155 2.3 8,200 0.02545 0.18 50.2
3.142 2 6,200 0.02011 0.16 39.7
2.545 1.8 5,020 0.01539 0.14 30.4
2.011 1.6 3,970 0.01131 0.12 22.3
1.539 1.4 3,040 0.00785 0.1 15.5
1.131 1.2 2,230
0.7854 1 1,550
*Nominal CMA has been “rounded off” for ease of calculation when using multiple
wires in one termination.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
8
The SOLISTRAND Terminal
SOLISTRAND terminals and splices are
specially designed to terminate solid and
stranded wire, irregular shaped conduc-
tors, and combinations of these—still
retaining the superior performance char-
acteristics of single-purpose terminals
and splices. Because AMP matches the
terminal to the tool each termination is
uniformly perfect, making quality control
easy and performance consistent.
Corrosion resistance, vibration resis-
tance and tensile strength of these termi-
nals and splices are well within the lim-
its of commercial and military specifica-
tions. The SOLISTRAND line includes
parallel and butt splices, and flag, ring,
spade, hooked, and flanged tongue ter-
minals in sizes from 26 AWG [0.1 mm2]
through 600 MCM [304 mm2].
The Crimp
The “W” Crimp is one of several time-
proven crimp types developed by AMP.
It is not just a “kink” in a metal barrel;
not something pinched over electrical
wire ends. The “W” Crimp is actually two
longitudinal crimps applied with pre-
cisely controlled pressure so that the
conductor within the barrel flows togeth-
er into the dimples or serrations of the
terminal barrel creating one homoge-
neous mass of metal. The two indents
also help to center conductors within the
barrel for uniform crimping of the barrel
around the wire. Furthermore, the “W”
Crimp permits the use of a shorter termi-
nal barrel, an excellent feature for con-
fined area termination.
The “W” Crimp creates terminations of
optimum electrical properties and is
completely reliable, giving long service
in punishing environments.
BASIC TERMINAL MATERIAL. The
basic terminal is constructed of fine
grade high conductivity copper per
ASTM B-152 and tin-plated per
MIL-T-10727. Basic material for
Spring Spade Tongue Terminals is
phosphor bronze per ASTM B-103
and tin-plated per MIL-T-10727.
AMP’s special plating process cre-
ates durable corrosion resistance to
salt spray and most chemical
fumes.
DIMPLES OR SERRATIONS. Inner
surface either dimpled or serrated
for optimum tensile strength and
maximum electrical contact area
after crimping.
BELL MOUTH. Bell shape of barrel
entrance makes insertion of wires
easier.
SOLISTRAND Terminals meet or
exceed the requirements of
MIL-T-7928, Type I, Class 1 and 2.
Temperature Rating: 170°C Max.
AMP SOLISTRAND Terminals and Splices
(Use SOLISTRAND Tooling)
AMP Inc. Listed LR 7189
Wire Size File No. E13288 Certified
22–16 22–16 22–16
Solid or Stranded Solid or Stranded Solid or Stranded
16–14 16–14 16–14
Solid or Stranded Solid or Stranded Solid or Stranded
16–14 Heavy Duty 16–14 Heavy Duty 16–14 Heavy Duty
Solid or Stranded Stranded Solid or Stranded
14–12 14–12 14–12
Solid or Stranded Stranded Solid or Stranded
12–10 12–10 12–10
Solid or Stranded Stranded Solid or Stranded
8 thru 600 MCM 8 thru 600 MCM 8 thru 600 MCM
Solid or Stranded Stranded Solid or Stranded
Note: 22-16 terminals and splices are stamped 22-18 in accordance with
MIL-T-7928. Commercial wire range is 22-16.
DANGER: Not to be used on aluminum wire — may cause equipment
failure leading to serious injury or death.
“W” Crimp
One Solid Two Solid
One Stranded
One Solid
Two Stranded
BRAZED SEAM. The barrel is
completely closed and seam is
brazed for uniform metal strength
around the entire barrel area.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
9
The Budget Terminal
Budget Terminals and splices are pri-
marily the same as SOLISTRAND prod-
ucts except for the absence of the brazed
seam in the wire barrel. This terminal is
ideal for applications where extreme
vibration and tension on the wire are not
present. These terminals and splices ful-
fill the need for an economical and elec-
trically superior termination through the
use of high grade materials, long plating
experience and a proven crimp.
One of the most desirable features of this
terminal and splice is the “F” Crimp.
This proven crimp configuration rolls the
open seam barrel into the conductor pre-
senting a large surface to the inside of
the terminal barrel assuring optimum
electrical performance.
The Budget line includes butt splices,
ring, rectangular, flanged spade, hooked,
and spring spade tongue terminals in
sizes from 26 AWG [0.1 mm2] through
10 AWG [6.64 mm2].
Temperature Rating: 170°C Max.
AMP Budget Terminals and Splices
(Use Budget Tooling)
Wire Size Listed
File No. E13288
22–16 22–16
Stranded Stranded
16–14 16–14
Stranded Stranded
12–10 12–10
Stranded Stranded
Note: 22-16 terminals and splices are stamped
22-18 in accordance with MIL-T-7928.
Commercial wire range is 22-16.
BASIC TERMINAL MATERIAL. The
basic terminal is constructed of fine
grade high conductivity copper per
ASTM B-152 and tin-plated per MIL-
T-10727. Basic material for Spring
Spade Tongue Terminals is phos-
phor bronze per ASTM B-103 and
tin-plated per MIL-T-10727. AMP’s
special plating process creates
durable corrosion resistance to salt
spray and most chemical fumes.
BELL MOUTH. Bell shape of barrel
entrance makes insertion of wires
easier.
SERRATIONS. Inner surface
serrated for optimum tensile
strength and maximum electrical
contact area after crimping.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
DIAMOND GRIP Terminal
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
10
The DIAMOND GRIP product line of ter-
minals and splices is designed for com-
pletely uniform reliability under the most
critical conditions of vibration, thermal
shock, corrosion, tension and current
overload. AMP’s mated tool/terminal
concept represents a total approach to
wire termination and takes into account
all the factors of circuit termination.
The uniformity of appearance of AMP
terminations is repeated by their unifor-
mity in performance— made possible
by designing the terminal and the tool-
ing to match precisely. This promotes
fast and easy crimping and assures pre-
cise crimping pressure for every wire
size, regardless of the skill of the opera-
tor. The result is the best circuit termina-
tion at the lowest applied cost. And this
is true for all terminations from first to
last, week after week, month after month.
The Crimp
After the wire is inserted into the barrel,
the matching dies in the AMP tool close
over the barrel, exerting great pressure.
This causes the wire strands to flow into
the serrations of the terminal barrel as it
is compressed around them, forming a
homogenous mass of the strands and
terminal barrel. This maximum contact
assures optimum conductivity of the
termination.
BASIC TERMINAL MATERIAL.
The basic terminal is constructed of
fine grade high conductivity copper
per ASTM B-152 and tin-plated per
MIL-T-10727. AMP’s special plating
process creates durable corrosion
resistance to salt spray and most
chemical fumes.
“V” NOTCHES. These
lock the wire insulation
against vibration and
pullout.
BELL MOUTH. Assures
easy wire insertion.
SERRATIONS. Serrations inside
the barrel provide maximum contact
and tensile strength after crimping.
COPPER SLEEVE.The specially
designed copper sleeve, fitted
over the terminal barrel, provides
circumferential insulation support
to the wire and allows the wire to
be bent in any direction, without
fraying the wire’s insulation or
breaking the conductor.
Temperature Rating: 170°C Max.
DIAMOND GRIP Terminals and Splices
(Use DIAMOND GRIP Tooling)
AMP
Wire Listed LR 7189
Range Certified
22–16 22–16 22–16
Stranded Stranded
16–14 16–14 16–14
Stranded Stranded
16–14 HD 16–14 HD —
Stranded
12-10 12–10 12–10
Stranded Stranded
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
11
Terminal Stud Hole Size
Use to Select Proper Size Terminal
The chart shows sizes and dimensions of various studs and the corresponding terminal stud hole sizes used with AMP devices.
For example, with stud #5 (.125 [3.18] Diameter), use AMP device listed for #5 stud (.132 [3.35] Hole Diameter).
Terminal stud hole sizes may easily be checked by fitting sample terminal to black circle.
Stud Size Typical Terminal
U.S. Cust. Metric Stud Dia. Stud Hole Diameter
0#0 — .060 .067 .003
1.52 1.70 0.08
0#1 — .073 .080 .003
1.85 2.03 0.08
0#2 M2 .086 .093 .003
2.18 2.36 0.08
0#3 — .099
2.51 Not Available
0#4 — .112 .119 .003
2.84 3.02 0.08
0#5 M3 .125 .132 .003
3.18 3.35 0.08
0#6 M3.5 .138 .145 .003
3.51 3.68 0.08
0#8 M4 .164 .171 .003
4.17 4.34 0.08
#10 — .190 .197 .003
4.83 5.00 0.08
#12 — .216 .223 .003
5.49 5.66 0.08
#14 — .242 .250 .003
6.15 6.35 0.08
1/4" M6 .250 .265 .005
6.35 6.73 0.13
5/16" M8 .312 .328 .005
7.92 8.33 0.13
3/8" — .375 .390 .005
9.53 9.91 0.13
Stud Size Typical Terminal
U.S. Cust. Metric Stud Dia. Stud Hole Diameter
7/16" — .437 .453 .005
11.10 11.51 0.13
1/2" M12 .500 .515 .005
12.70 13.08 0.13
5/8" .625 .656 .005
M16 15.88 16.66 0.13
3/4" — .750 .781 .005
19.05 19.84 0.13
7/8" .875 .906 .005
M22 22.23 23.01 0.13
1" — 1.000 1.031 .005
25.40 26.19 0.13
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
12
Ring Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud Style L E C WThickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
0 A .329 .256 .121 .140 .020 —.035 —0-31423-0
8.36 6.50 3.07 3.56 0.51 0.89
A.329 .256 .121 .140 .020 —.035 —0-31425-0
8.36 6.50 3.07 3.56 0.51 0.89 2-31425-2
2A.450 .346 .211 .203 .020 —.035 —0-33695-0
M2 11.43 8.79 5.36 5.16 0.51 0.89
A.419 .346 .211 .140 .020 .031 .035 0-50334* 0-322771-0
10.64 8.79 5.36 3.56 0.51 0.79 0.89
4 A .450 .346 .211 .203 .020 —.035 —0-31428-0
26–22 11.43 8.79 5.36 5.16 0.51 0.89
202–810 A.450 .346 .211 .203 .020 —.035 —0-31430-0
[0.1–0.41] 611.43 8.79 5.36 5.16 0.51 0.89
M3.5 A.544 .416 .281 .250 .020 .031 .035 0-331401-0 0-32858-0
13.82 10.57 7.14 6.35 0.51 0.79 0.89 1-331401-1
A.544 .416 .281 .250 .020 —.035 —0-32859-0
813.82 10.57 7.14 6.35 0.51 0.89
A.544 .416 .281 .250 .020 —.035 —0-32860-0
10 13.82 10.57 7.14 6.35 0.51 0.89
1A.449 .337 .156 .218 .033 —.065 —0-31087-0
11.40 8.56 3.96 5.54 0.84 1.65
A.449 .337 .156 .218 .033 .061 .065 0-34103-0 0-31088-0
211.40 8.56 3.96 5.54 0.84 1.55 1.65 2-34103-1
M2 A.446 .353 .172 .182 .033 .061 .065 0-322927-0 1320677-0
11.33 8.97 4.37 4.62 0.84 1.55 1.65
A.449 .337 .156 .218 .033 .061 .065 0-34104*0 0-31089-0
11.40 8.56 3.96 5.54 0.84 1.55 1.65 2-34104-6 3-31089-6
A.446 .353 .172 .182 .033 .061 .065 0-36467* 0-36189-0
411.33 8.97 4.37 4.62 0.84 1.55 1.65 2-326850-1
A.621 .493 .312 .250 .033 .061 .065 0-323096-0 0322418-0
15.77 12.52 7.92 6.35 0.84 1.55 1.65 2-323096-2
5A.449 .337 .156 .218 .033 —.065 —0-31090-0
M3 11.40 8.56 3.96 5.54 0.84 1.65 2-31090-1
22–16 A.449 .337 .156 .218 .033 .061 .065 0-34105*0
509–3,260 11.40 8.56 3.96 5.54 0.84 1.55 1.65 2-34105-2 0-31091-0
[0.26–1.65] A.528 .416 .156 .218 .033 .061 .065 0-34194-0 0-31101-0
613.41 10.57 3.96 5.54 0.84 1.55 1.65
A.574 .436 .250 .281 .033 .061 .065 0-34107*00-31264-0
M3.5 14.58 11.07 6.35 7.14 0.84 1.55 1.65 2-34107-2
A.621 .462 .281 .312 .033 .061 .065 0-34110*0 0-30691*0
15.77 11.73 7.14 7.92 0.84 1.55 1.65 2-34110-3 1-30691-1
A.653 .478 .297 .344 .033 —.065 —0-32822-0
16.59 12.14 7.54 8.74 0.84 1.65
A.621 .462 .281 .312 .033 .061 .065 0-34111*00-30692-0
15.77 11.73 7.14 7.92 0.84 1.55 1.65 2-34111-3
8A.574 .436 .250 .281 .033 .061 .065 0-34108*00-31265*0
M4 14.58 11.07 6.35 7.14 0.84 1.55 1.65 2-34108-2
A.653 .478 .297 .344 .033 .061 .065 0-323086-0 0-32823-0
16.59 12.14 7.54 8.74 0.84 1.55 1.65
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
13
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 22 to 14,
CMA 509 to 5,180
[0.26 to 2.62 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud Style L E C WThickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
A.621 .462 .281 .312 .033 .061 .065 0-34112*0 0-30693*0
15.77 11.73 7.14 7.92 0.84 1.55 1.65 2-34112-2 3-30693-7
A.574 .436 .250 .281 .033 .061 .065 0-34109*00-31266-0
10 14.58 11.07 6.35 7.14 0.84 1.55 1.65 2-34109-2
A.653 .478 .297 .344 .033 .061 .065 0-323087*0 0-32824-0
16.59 12.14 7.54 8.74 0.84 1.55 1.65
22–16 12 A .621 .462 .281 .312 .033 —.065 —0-30694-0
509–3,260 15.77 11.73 7.14 7.92 0.84 1.65 2-30694-1
[0.26–1.65]1/4 A.856 .618 .437 .469 .033 .061 .065 0-34113*00-31172-0
M6 21.74 15.70 11.10 11.91 0.84 1.55 1.65 2-34113-2
A.856 .618 .437 .469 .033 .061 .065 0-34114*0 0-31173-0
5/16 21.74 15.70 11.10 11.91 0.84 1.55 1.65 2-34114-2 3-31173-3
M8 A.995 .727 .546 .531 .033 —.065 —0-324124-0
25.27 18.47 13.87 13.49 0.84 1.65
3/8 A .995 .727 .546 .531 .033 .061 .065 0-34115*00-31498-0
25.27 18.47 13.87 13.49 0.84 1.55 1.65 2-34115-2
1/2 A1.070 .711 .530 .713 .033 .061 .065 0-329966*0 0-328970-0
M12 27.18 18.06 13.46 18.11 0.84 1.55 1.65
A.480 .352 .171 .250 .033 —.089 —0-321007- 0
212.19 8.94 4.34 6.35 0.84 2.26
M2 A.445 .352 .171 .180 .033 .085 .089 0-328377-0 0-326854- 0
11.30 8.94 4.34 4.57 0.84 2.16 2.26
A.480 .352 .171 .250 .033 .085 .089 0-34119*00-32185-0
412.19 8.94 4.34 6.35 0.84 2.16 2.26 2-34119-1
A.636 .462 .281 .343 .033 .085 .089 0-34121*00-30695-0
16.15 11.73 7.14 8.71 0.84 2.16 2.26 2-34121-1
6A.480 .352 .171 .250 .033 .085 .089 0-34120*00-32186*0
M3.5 12.19 8.94 4.34 6.35 0.84 2.16 2.26 2-34120-1
A.590 .431 .250 .312 .033 .085 .089 0-321684*00-321683-0
14.99 10.95 6.35 7.92 0.84 2.16 2.26 2-321684-1
16–14 A.636 .462 .281 .343 .033 .085 .089 0-34122*00-30696*0
2,050–5,180 816.15 11.73 7.14 8.71 0.84 2.16 2.26 2-34122-1
[1.04–2.62] M4 A.590 .431 .250 .312 .033 .085 .089 0-324955*0 0-322235- 0
14.99 10.95 6.35 7.92 0.84 2.16 2.26 2-324955-1 1-322235-1
A.621 .462 .281 .312 .033 —.089 —0-51872-5
15.77 11.73 7.14 7.92 0.84 2.26
A.636 .462 .281 .343 .033 .085 .089 0-34123*00-30697*0
10 16.15 11.73 7.14 8.71 0.84 2.16 2.26 2-34123-1
A.669 .510 .250 .312 .033 .085 .089 0-320093-0 0-31049-0
16.99 12.95 6.35 7.92 0.84 2.16 2.26 2-320093-1
12 A .855 .618 .437 .469 .033 —.089 —0-31163-0
21.72 15.70 11.10 11.91 0.84 2.26
14 A .730 .493 .312 .468 .033 —.089 —0-34896-0
18.54 12.52 7.92 11.89 0.84 2.26
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
A
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
14
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 16 to 10,
CMA 2,050 to 13,100
[1.04 to 6.64 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud Style L E C W Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Max.
1/4 A.855 .618 .437 .469 .033 .085 .089 0-34124*00-31164-0
M6 21.72 15.70 11.10 11.91 0.84 2.16 2.26 2-34124-1
5/16 A.855 .618 .437 .469 .033 .085 .089 0-34125*00-31165-0
M8 21.72 15.70 11.10 11.91 0.84 2.16 2.26 2-34125-6
16–14 3/8 A.995 .727 .546 .531 .033 .085 .089 0-34126*00-31499-0
2,050–5,180 25.27 18.47 13.87 13.49 0.84 2.16 2.26 2-34126-2
[1.04–2.62] A1.070 .711 .530 .713 .033 —.089 —0-328971-0
1/2 27.18 18.06 13.46 18.11 0.84 2.26
M12 A1.184 .806 .625 .750 .033 .085 .089 0-50981-0 0-50982-0
30.07 20.47 15.88 19.05 0.84 2.16 2.26
8B.685 .526 .250 .312 .042 .098 —0-321827-0 —
M4 17.40 13.36 6.35 7.92 1.07 2.49
B.739 .526 .250 .421 .042 .098 —0-34484-0 —
14–12 10 18.77 13.36 6.35 10.69 1.07 2.49 1-34484-0
3,260–8,230 B.685 .526 .250 .312 .042 .098 —0-321828-0 —
[1.65–4.17] 17.40 13.36 6.35 7.92 1.07 2.49 1-321828-0
1/4 B.739 .526 .250 .421 .042 .098 —0-34487-0 —
M6 18.77 13.36 6.35 10.69 1.07 2.49
3⁄8 B 1.120 .774 .437 .687 .042 .098 —0-34486-0 —
28.45 19.66 11.10 17.45 1.07 2.49
4 A .630 .487 .219 .281 .042 .129 .134 0-322447 0-34891-0
16.00 12.37 5.56 7.14 1.07 3.28 3.40
A.630 .487 .219 .281 .042 .129 .134 0-35476*00-34892-0
16.00 12.37 5.56 7.14 1.07 3.28 3.40 2-35476-1
6A.729 .570 .302 .312 .042 .129 .134 0-324911-0 0-324910-0
M3.5 18.52 14.48 7.67 7.92 1.07 3.28 3.40
A.765 .575 .302 .375 .042 .129 .134 0-33456-0 0-31112-0
19.43 14.61 7.67 9.53 1.07 3.28 3.40 2-33456-1
A.708 .549 .281 .312 .042 .129 .134 0-322454*0 0-34404*0
817.98 13.94 7.14 7.92 1.07 3.28 3.40
M4 A.765 .575 .302 .375 .042 .129 .134 0-32994*00-31113-0
19.43 14.61 7.67 9.53 1.07 3.28 3.40 2-32994-1
12–10 A.723 .549 .281 .343 .042 .129 .134 0-322455-0 0-32882-0
5,180–13,100 18.36 13.94 7.14 8.71 1.07 3.28 3.40 2-322455-1
[2.62–6.64] A.765 .575 .302 .375 .042 .129 .134 0-33457*00-31114*0
10
19.43 14.61 7.67 9.53 1.07 3.28 3.40 2-33457-2
A.808 .618 .343 .375 .042 .129 .134 0-31805-0 0-321829-0
20.52 15.70 8.71 9.53 1.07 3.28 3.40
A.865 .612 .344 .500 .042 .129 .134 0-35771*00-34964-0
21.97 15.54 8.74 12.70 1.07 3.28 3.40 2-35771-1
A1.004 .736 .468 .531 .042 .129 .134 0-36451-0 0-31120-0
25.50 18.69 11.89 13.49 1.07 3.28 3.40
A.865 .612 .344 .500 .042 .129 .134 0-35772*00-34965-0
1/4 21.97 15.54 8.74 12.70 1.07 3.28 3.40 2-35772-1
M6 A1.004 .736 .468 .531 .042 .129 .134 0-33458*00-31122*0
25.50 18.69 11.89 13.49 1.07 3.28 3.40 2-33458-3
A.865 .612 .344 .500 .042 —.134 —0-34966-0
5/16 21.97 15.54 8.74 12.70 1.07 3.40
M8 A1.004 .736 .468 .531 .042 .129 .134 0-33459*00-31123-0
25.50 18.69 11.89 13.49 1.07 3.28 3.40 2-33459-6
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
AB
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
15
Ring Tongue Terminals (Continued)
Wire Size Range
AWG 12 to 8,
CMA 5,180 to 20,800
[2.62 to 10.5 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
AC
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud Style L E C W Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Max.
A1.098 .799 .531 .593 .042 .129 .134 *033220*00-30972-0
3/8 27.89 20.29 13.49 15.06 1.07 3.28 3.40 *1-33220-23
A1.271 .893 .625 .750 .042 .129 .134 03222420 0-34833-0
32.28 22.68 15.88 19.05 1.07 3.28 3.40
A1.102 .742 .474 .715 .042 —.134 —0-52269-1
1/2 27.99 18.85 12.04 18.16 1.07 3.40
M12 A1.271 .893 .625 .750 .042 .129 .134 0-35135-0 0-34834-0
12-10 32.28 22.68 15.88 19.05 1.07 3.28 3.40 *2-35135-23
5,180–13,100 A 1.896 1.268 1.000 1.250 .042 .129 .134 0-320763-0 0-320760-0
[2.62-6.64] 48.16 32.21 25.40 31.75 1.07 3.28 3.40
5/8 A1.896 1.268 1.000 1.250 .042 .129 .134 0-320764-0 0-320761-0
M16 48.16 32.21 25.40 31.75 1.07 3.28 3.40
3/4 A 1.896 1.268 1.000 1.250 .042 .129 .134 0-320765-0 0-320762-0
48.16 32.21 25.40 31.75 1.07 3.28 3.40
7/8 A1.896 1.268 1.000 1.250 .042 .129 — 1-320765-1 —
M22 48.16 32.21 25.40 31.75 1.07 3.28
1 A 1.896 1.268 1.000 1.250 .042 .129 — 1-320765-0 —
48.16 32.21 25.40 31.75 1.07 3.28
C.949 .743 .359 .406 .051 .172 —0*324061*0—
824.10 18.87 9.12 10.31 1.30 4.37
M4 C.933 .696 .359 .469 .051 .172 —0*32996*0—
23.70 17.68 9.12 11.91 1.30 4.37 0*33460*0
C.933 .696 .359 .469 .051 .172 —*12-33460-2*1—
10 23.70 17.68 9.12 11.91 1.30 4.37 *22-33460-3*2
C.949 .743 .359 .406 0.51 .172 —0-31807-0 —
24.10 18.87 9.12 10.31 1.30 4.37 *22-31807-2*2
0-33461*0
1/4 C.933 .696 .359 .469 .051 .172 —*12-33461-2*1—
M6 23.70 17.68 9.12 11.91 1.30 4.37 *22-33461-3*2
A1.168 .868 .531 .594 .051 .172 —0*35247*0—
829.67 22.05 13.49 15.09 1.30 4.37
13,100–20,800 A1.168 .868 .531 .594 .051 .172 —0*33462*0—
[6.64–10.5] 29.67 22.05 13.49 15.09 1.30 4.37 2-33462-12
5/16 A1.074 .790 .406 .562 .051 .172 —0*31808*0—
M8 27.28 20.07 10.31 14.27 1.30 4.37
C.933 .696 .359 .469 .051 .172 —0-55991-1 —
23.70 17.68 9.12 11.91 1.30 4.37 0-55991-2
A1.168 .868 .531 .594 .051 .172 —0*33463*0—
3/8 29.67 22.05 13.49 15.09 1.30 4.37
A1.965 1.337 1.000 1.250 .051 .172 —0-36499-0 —
49.91 33.96 25.40 31.75 1.30 4.37
1/2 A1.965 1.337 1.000 1.250 .051 .172 —0*35664*0—
M12 49.91 33.96 25.40 31.75 1.30 4.37
5/8 A1.965 1.337 1.000 1.250 .051 .172 —0-35665-0 —
M16 49.91 33.96 25.40 31.75 1.30 4.37
3/4 A 1.965 1.337 1.000 1.250 .051 .172 —0-35666-0 —
49.91 33.96 25.40 31.75 1.30 4.37
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
1Requires a 69875 standard TAPETRONIC machine for application.
2Requires a 68250-1 Heavy Duty TAPETRONIC machine for application.
3Requires a 68250-1 Heavy Duty TAPETRONIC and 68242-2 die set for application.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
16
Ring Tongue Terminals (Continued)
Wire Size Dimensions Material
Circular Mils Stud Style L E C W Thickness Wire Barrel I.D. Min. Part Numbers
[mm2]Size Max. Max. Max. Solistrand Solistrand
C1.181 .931 .531 .406 .060 .232 *0-52197*-0
30.00 23.65 13.49 10.31 1.52 5.89 0-52197-1
C1.181 .984 .584 .406 .060 .232 0-53106-1
10 30.00 24.99 14.83 10.31 1.52 5.89
C1.246 .931 .531 .625 .060 .232 *33464*
31.65 23.65 13.49 15.88 1.52 5.89
1.168 .931 .531 .468 .060 .232 *321298*
C29.67 23.65 13.49 11.89 1.52 5.89 2-321298-6
C1.246 .931 .531 .625 .060 .232 *33465*
1/4 31.65 23.65 13.49 15.88 1.52 5.89 2-33465-1
M6 1.168 .931 .531 .468 .060 .232 *321598*
C29.67 23.65 13.49 11.89 1.52 5.89 2-321598-3
65/16 C1.246 .931 .531 .625 .060 .232 *33466*
20,800–33,100 M8 31.65 23.65 13.49 15.88 1.52 5.89 2-33466-3
[10.5–16.8] C1.246 .931 .531 .625 .060 .232 *33467*
3/8 31.65 23.65 13.49 15.88 1.52 5.89 2-33467-3
A2.033 1.400 1.000 1.250 .060 .232 36807
51.64 35.56 25.40 31.75 1.52 5.89
7/16 C 1.246 .931 .531 .625 .060 .232 320745
31.65 23.65 13.49 15.88 1.52 5.89
C1.840 1.400 1.000 .875 .060 .232 *320344*
1/2 46.74 35.56 25.40 22.23 1.52 5.89
M12 A2.033 1.400 1.000 1.250 .060 .232 36808
51.64 35.56 25.40 31.75 1.52 5.89
5/8 A 2.033 1.400 1.000 1.250 .060 .232 36809
51.64 35.56 25.40 31.75 1.52 5.89
3⁄4 A 2.033 1.400 1.000 1.250 .060 .232 36810
51.64 35.56 25.40 31.75 1.52 5.89
A1.314 .978 .516 .656 .073 .296 *33468*
10 33.38 24.84 13.11 16.66 1.85 7.52
C1.199 .946 .437 .500 .073 .280 33114
30.45 24.03 11.10 12.70 1.85 7.11
A1.314 .978 .516 .656 .073 .296 *33469*
1/4 33.38 24.84 13.11 16.66 1.85 7.52
M6 C1.199 .946 .437 .500 .073 .280
30.45 24.03 11.10 12.70 1.85 7.11 2-31811-4
4A1.314 .978 .516 .656 .073 .296 *33470*
33,100–52,600 5/16 33.38 24.84 13.11 16.66 1.85 7.52
[16.8–26.7]M8 C1.324 1.009 .500 .625 .073 .280 33115
33.63 25.63 12.70 15.88 1.85 7.11
A1.314 .978 .516 .656 .073 .296 *33471*
33.38 24.84 13.11 16.66 1.85 7.52
A2.090 1.462 1.000 1.250 .073 .296 36815
3/8 53.09 37.13 25.40 31.75 1.85 7.52
C1.902 1.462 1.000 .875 .073 .296 322704
48.31 37.13 25.40 22.23 1.85 7.52
C1.324 1.009 .500 .625 .073 .280 31812
33.63 25.63 12.70 15.88 1.85 7.11
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
semi-automatic pneumatic crimping system.
Wire Size Range
AWG 6 to 4,
CMA 20,800 to 52,600
[10.5 to 26.7 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
AC
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
17
Ring Tongue Terminals (Continued)
Wire Size Dimensions Material
Circular Mils Stud Style L E C W Thickness Wire Barrel I.D. Min. Part Numbers
[mm2]Size Max. Max. Max. Solistrand Solistrand
7/16 A** 1.314 .978 .516 .656 .073 .296 320743
33.38 24.84 13.11 16.66 1.85 7.52
A** 2.090 1.462 1.000 1.250 .073 .296 *35668*
41/2 53.09 37.13 25.40 31.75 1.85 7.52
33,100–52,600 M12 B1.902 1.462 1.000 .875 .073 .296 *327175*
[16.8–26.7] 48.31 37.13 25.40 22.23 1.85 7.52
5/8 A** 2.090 1.462 1.000 1.250 .073 .296 35669
M16 53.09 37.13 25.40 31.75 1.85 7.52
3/4 A** 2.090 1.462 1.000 1.250 .073 .296 35670
53.09 37.13 25.40 31.75 1.85 7.52
10 B 1.527 1.212 .531 .625 .073 .370 330301
38.79 30.78 13.49 15.88 1.85 9.40
B1.527 1.212 .531 .625 .073 .370 *320383*
1/4 38.79 30.78 13.49 15.88 1.85 9.40
M6 D1.657 1.212 .531 .890 .073 .370 320138
42.09 30.78 13.49 22.61 1.85 9.40
D1.657 1.212 .531 .890 .073 .370 35183
5/16 42.09 30.78 13.49 22.61 1.85 9.40
M8 B1.527 1.212 .531 .625 .073 .370 *322870*
38.79 30.78 13.49 15.88 1.85 9.40
B1.527 1.212 .531 .625 .073 .370 *321600*
238.79 30.78 13.49 15.88 1.85 9.40
52,600–83,700 3/8 D1.657 1.212 .531 .890 .073 .370 35184
[26.7–42.4] 42.09 30.78 13.49 22.61 1.85 9.40
7/16 D 1.657 1.212 .531 .890 .073 .370 320741
42.09 30.78 13.49 22.61 1.85 9.40
D1.657 1.212 .531 .890 .073 .370 35185*
1/2 42.09 30.78 13.49 22.61 1.85 9.40
M12 D2.516 1.888 1.125 1.250 .073 .370 323291
63.91 47.96 28.58 31.75 1.85 9.40
5/8 D2.516 1.888 1.125 1.250 .073 .370 320754
M16 63.91 47.96 28.58 31.75 1.85 9.40
3/4 D 2.516 1.888 1.125 1.250 .073 .370 320755
63.91 47.96 28.58 31.75 1.85 9.40
C1.956 1.529 .625 .875 .073 .444 36915
1/4 49.68 38.84 15.88 22.23 1.85 11.28
M6 C1.925 1.532 .625 .807 .073 .444 321866
48.90 38.91 15.88 20.50 1.85 11.28
C1.956 1.529 .625 .875 .073 .444 36916*
1/0 5/16 49.68 38.84 15.88 22.23 1.85 11.28
83,700–119,500 M8 C1.925 1.532 .625 .807 .073 .444 *321867*
[42.4–60.6] 48.90 38.91 15.88 20.50 1.85 11.28
C1.956 1.529 .625 .875 .073 .444 *36917*
3/8 49.68 38.84 15.88 22.23 1.85 11.28
C1.925 1.532 .625 .807 .073 .444 321868
48.90 38.91 15.88 20.50 1.85 11.28
7/16 C 1.956 1.529 .625 .875 .073 .444 36918
49.68 38.84 15.88 22.23 1.85 11.28
*Part numbers are available in small quantity packages.
** See style A art on preceding page.
Wire Size Range
AWG 4 to 1/0,
CMA 33,100 to 119,500
[16.8 to 60.6 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
C DB
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
18
Ring Tongue Terminals (Continued)
Wire Size Dimensions Material
Circular Mils Stud Style L E C W Thickness Wire Barrel I.D. Min. Part Numbers
[mm2]Size Max. Max. Max. Solistrand Solistrand
C1.956 1.529 .625 .875 .073 .444 36919*
1/2 49.68 38.84 15.88 22.23 1.85 11.28
M12 C2.678 2.063 1.125 1.265 .073 .444 3222911/0 68.02 52.40 28.58 32.13 1.85 11.28
83,700–119,500 5/8 C2.678 2.063 1.125 1.265 .073 .444 320744
[42.4–60.6] M16 68.02 52.40 28.58 32.13 1.85 11.28
3/4 C 2.678 2.063 1.125 1.265 .073 .444 320748
68.02 52.40 28.58 32.13 1.85 11.28
C1.930 1.550 .625 .926 .083 .504 321869
1/4 49.02 39.37 15.88 23.52 2.11 12.80
M6 C2.000 1.545 .625 .946 .083 .504 36921
50.80 39.24 15.88 24.03 2.11 12.80
C1.930 1.550 .625 .926 .083 .504 321870*
5/16 49.02 39.37 15.88 23.52 2.11 12.80
M8 C2.000 1.545 .625 .946 .083 .504 36922
50.80 39.24 15.88 24.03 2.11 12.80
C1.930 1.550 .625 .926 .083 .504 321871*
3/8 49.02 39.37 15.88 23.52 2.11 12.80
2/0 C2.000 1.545 .625 .946 .083 .504 36923*
119,500–150,500 50.80 39.24 15.88 24.03 2.11 12.80
[60.6–76.3]7/16 C 1.930 1.550 .625 .926 .083 .504 321872
49.02 39.37 15.88 23.52 2.11 12.80
C1.930 1.550 .625 .926 .083 .504 321873*
49.02 39.37 15.88 23.52 2.11 12.80
1/2 C2.000 1.545 .625 .946 .083 .504 36925*
M12 50.80 39.24 15.88 24.03 2.11 12.80
C2.671 2.056 1.125 1.270 .083 .504 322391
67.84 52.22 28.58 32.26 2.11 12.80
5/8 C2.671 2.056 1.125 1.270 .083 .504 322224
M16 67.84 52.22 28.58 32.26 2.11 12.80
3/4 C 2.671 2.056 1.125 1.270 .083 .504 322225
67.84 52.22 28.58 32.26 2.11 12.80
1/4 B 2.112 1.622 .625 1.020 .094 .565 323868
53.64 41.20 15.88 25.91 2.39 14.35
B2.112 1.622 .625 1.020 .094 .565 321874
5/16 53.64 41.20 15.88 25.91 2.39 14.35
M8 B2.143 1.643 .625 1.082 .094 .565 320266
3/0 54.43 41.73 15.88 27.48 2.39 14.35
150,500–190,000 B2.112 1.622 .625 1.020 .094 .565 321875*
[76.3–96.3] 3/8 53.64 41.20 15.88 25.91 2.39 14.35
B2.143 1.643 .625 1.082 .094 .565 36927*
54.43 41.73 15.88 27.48 2.39 14.35
7/16 B 2.112 1.622 .625 1.020 .094 .565 321876
53.64 41.20 15.88 25.91 2.39 14.35
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 1/0 to 3/0,
CMA 83,700 to 190,000
[42.4 to 96.3 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
C
B
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
19
Ring Tongue Terminals (Continued)
Wire Size Dimensions Material
Circular Mils Stud Style L E C W Thickness Wire Barrel I.D. Min. Part Numbers
[mm2]Size Max. Max. Max. Solistrand Solistrand
B2.143 1.643 .625 1.082 .094 .565 01-36929*0
1/2 54.43 41.73 15.88 27.48 2.39 14.35
M12 B2.112 1.622 .625 1.020 .094 .565 0-321877*0
53.64 41.20 15.88 25.91 2.39 14.35
3/0 C2.699 2.084 1.125 1.270 .094 .565 0-322222-0
150,500–190,000 5/8 68.55 52.93 28.58 32.26 2.39 14.35
[76.3–96.3] M16 B2.143 1.643 .625 1.082 .094 .565 01-36930-0
54.43 41.73 15.88 27.48 2.39 14.35
3/4 C 2.699 2.084 1.125 1.270 .094 .565 0-322223-0
68.55 52.93 28.58 32.26 2.39 14.35
1/4 B2.206 1.644 .625 1.150 .105 .635 12-36932-2
M6 56.03 41.76 15.88 29.21 2.67 16.13
5/16 B2.537 1.985 1.078 1.150 .105 .635 0-321271-0
M8 64.44 50.42 27.38 29.21 2.67 16.13
B2.206 1.644 .625 1.150 .105 .635 01-36932-0
56.03 41.76 15.88 29.21 2.67 16.13
3/8 B2.178 1.657 .625 1.087 .105 .635 0-321878*0
55.32 42.09 15.88 27.61 2.67 16.13
7/16 B 2.178 1.657 .625 1.087 .105 .635 0-321879-0
55.32 42.09 15.88 27.61 2.67 16.13
4/0 B2.178 1.657 .625 1.087 .105 .635 0-321880*0
190,000–231,000 55.32 42.09 15.88 27.61 2.67 16.13
[96.3–117] 1/2 B2.206 1.644 .625 1.150 .105 .635 01-36934*0
M12 56.03 41.76 15.88 29.21 2.67 16.13
B2.537 1.985 1.078 1.150 .105 .635 0-321163-0
64.44 50.42 27.38 29.21 2.67 16.13
B2.206 1.644 .625 1.150 .105 .635 036935
5/8 56.03 41.76 15.88 29.21 2.67 16.13
M16 C2.732 2.117 1.078 1.275 .105 .635 322227
69.39 53.77 27.38 32.39 2.67 16.13
3/4 C 2.732 2.117 1.078 1.275 .105 .635 322228
69.39 53.77 27.38 32.39 2.67 16.13
7/8 C2.732 2.117 1.078 1.275 .105 .635 321625
M22 69.39 53.77 27.38 32.39 2.67 16.13
3/8 B 2.602 1.987 .625 1.435 .130 .753 322252
66.09 50.47 15.88 36.45 3.30 19.13
7/16 B 2.602 1.987 .625 1.435 .130 .753 322253
66.09 50.47 15.88 36.45 3.30 19.13
250–300 MCM 1/2 B2.602 1.987 .625 1.435 .130 .753 322254
231,000–300,000 M12 66.09 50.47 15.88 36.45 3.30 19.13
[117–152] 5/8 B2.602 1.987 .625 1.435 .130 .753 323050
M16 66.09 50.47 15.88 36.45 3.30 19.13
3/4 B 3.259 2.566 1.203 1.435 .130 .753 323140
82.78 65.18 30.56 36.45 3.30 19.13
1 B 3.259 2.566 1.203 1.435 .130 .753 323034
82.78 65.18 30.56 36.45 3.30 19.13
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 3/0 to 300 MCM,
CMA 150,500 to 300,000
[76.3 to 152 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B C
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
20
Ring Tongue Terminals (Continued)
Wire Size Dimensions Material
Circular Mils Stud Style L E C W Thickness Wire Barrel I.D. Min. Part Numbers
[mm2]Size Max. Max. Max. Solistrand Solistrand
B2.671 2.056 .625 1.545 .140 .819 322257
3/8 67.84 52.22 15.88 39.24 3.56 20.80
B3.422 2.675 1.250 1.545 .140 .819 322763
86.92 67.95 31.75 39.24 3.56 20.80
7/16 B 2.671 2.056 .625 1.545 .140 .819 322258
300–350 MCM 67.84 52.22 15.88 39.24 3.56 20.80
300,000–380,000 B 2.671 2.056 .625 1.545 .140 .819 322259
[152–193] 1/2 67.84 52.22 15.88 39.24 3.56 20.80
M12 B3.422 2.675 1.250 1.545 .140 .819 322764
86.92 67.95 31.75 39.24 3.56 20.80
5/8 B 2.671 2.065 .625 1.545 .140 .819 324105
67.84 52.22 15.88 39.24 3.56 20.80
3/4 B 3.422 2.675 1.250 1.545 .140 .819 322428
86.92 67.95 31.75 39.24 3.56 20.80
3/8 B 2.790 2.175 .625 1.749 .158 .930 322262
70.87 55.25 15.88 44.42 4.01 23.62
7/16 B 2.790 2.175 .625 1.749 .158 .930 322263
70.87 55.25 15.88 44.42 4.01 23.62
B2.790 2.175 .625 1.749 .158 .930 322264
400 MCM 1/2 70.87 55.25 15.88 44.42 4.01 23.62
380,000–478,000 M12 B3.644 2.795 1.250 1.749 .158 .930 327882
[193–242] 92.56 70.99 31.75 44.42 4.01 23.62
5/8 B2.790 2.175 .625 1.749 .158 .930 324202
M16 70.87 55.25 15.88 44.42 4.01 23.62
3/4 B 3.644 2.795 1.250 1.749 .158 .930 323222
92.56 70.99 31.75 44.42 4.01 23.62
1 B 3.644 2.795 1.250 1.749 .158 .930 322939
92.56 70.99 31.75 44.42 4.01 23.62
B3.187 2.447 .750 2.015 .182 1.075 322267
3/8 80.95 62.15 19.05 51.18 4.62 27.31
B4.176 3.194 1.500 2.015 .182 1.075 322772
106.07 81.13 38.10 51.18 4.62 27.31
B3.187 2.447 .750 2.015 .182 1.075 322269
500–600 MCM 1/2 80.95 62.15 19.05 51.18 4.62 27.31
478,000–600,000 M12 B4.176 3.194 1.500 2.015 .182 1.075 322773
[242–304] 106.07 81.13 38.10 51.18 4.62 27.31
5/8 B3.187 2.447 .750 2.015 .182 1.075 322270
M16 80.95 62.15 19.05 51.18 4.62 27.31
3/4 B 4.176 3.194 1.500 2.015 .182 1.075 322271
106.07 81.13 38.10 51.18 4.62 27.31
1 B 4.176 3.194 1.500 2.015 .182 1.075 322273
106.07 81.13 38.10 51.18 4.62 27.31
Wire Size Range
300 to 600 MCM,
CMA 300,000 — 600,000
[152 to 304 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Right Angle Ring Tongue Terminals
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
21
Wire Size Dimensions Material Wire
Circular Mils Stud CWThickness Barrel Part Numbers
[mm2]Size Min. Max. ID Min
22-16 6.171 .281 .033 .061 321262
509-3,260 4.34 7.14 .838 1.55
[0.26-1.65] .187 .312 .033 .061 32276810 4.75 7.92 .838 1.55
16-14 8.185 .343 .050 .105 184269
2,050-5,180 4.70 8.71 1.27 2.67
[1.04-2.62] .192 .343 .033 .085 32282110 4.88 8.71 .838 2.16
81/4 .432 .594 .051 .172 35277
13,100-20,800 10.97 15.09 1.30 4.37
[6.64-10.5]
61/4 .390 .625 .060 .232 35678
20,800-33,100 9.91 15.88 1.52 5.89
[10.5-16.8] .390 .625 .060 .232 33466-15/16 9.91 15.88 1.52 5.89
1/4 .375 .656 .073 .296 35625
49.53 16.66 1.85 7.52
33,100-52,600 .348 .625 .073 .280 33115-1
[16.8-26.7] 5/16 8.84 15.88 1.85 7.11
.348 .625 .073 .280 31812-13/8 8.84 15.88 1.85 7.11
25/16 .422 .625 .073 .370 322870-1
52,600-83,700 10.72 15.88 1.85 9.40
[26.7-42.4]
1/4 .437 .807 .073 .444 322905
11.10 20.50 1.85 11.28
1/0 .531 .807 .073 .444 321867-1
83,700-119,500 5/16 13.49 20.50 1.85 11.28
[42.4-60.6] .531 .807 .073 .444 3229063/8 13.49 20.50 1.85 11.28
.531 .875 .073 .444 3229091/2 13.49 22.23 1.85 11.28
2/0 5/16 .500 .946 .083 .504 36922-1
119,500-150,500 12.70 24.03 2.11 12.80
[60.6-76.3] .531 .926 .083 .504 3229123/8 13.49 23.52 2.11 12.80
5/16 .531 1.020 .094 .565 321874-1
3/0 13.49 25.91 2.39 14.35
150,500-190,000 .468 1.082 .094 .565 324035
[76.3-96.3] 3/8 11.89 27.48 2.39 14.35
.468 1.062 .094 .565 36929-11/2 11.89 26.97 2.39 14.35
4/0 5/16 .750 1.150 .105 .635 321272
190,000-231,000 19.05 29.21 2.67 16.13
[96.3-117] .484 1.140 .105 .635 3212653/8 12.29 28.96 2.67 16.13
250-300 MCM 1/2 .863 1.435 .129 .753 324023
231,000-300,000 21.92 36.45 3.28 19.13
[117-152]
Wire Size Range
AWG 22 to 300 MCM,
CMA 509 — 300,000
[0.26 to 152 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
22
Heavy Duty Ring Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud Style L E C W Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Max.
4 A .630 .487 .219 .281 .050 —.110 — 33728
16.00 12.37 5.56 7.14 1.27 2.79
A.630 .487 .219 .281 .050 —.110 — 33729
616.00 12.37 5.56 7.14 1.27 2.79
M3.5 A.723 .549 .281 .343 .050 .105 .110 0-322833-1 33716
18.36 13.94 7.14 8.71 1.27 2.67 2.79
8A.723 .549 .281 .343 .050 .105 .110 10-35432-1 33717
M4 18.36 13.94 7.14 8.71 1.27 2.67 2.79
A.723 .549 .281 .343 .050 .105 .110 10-34567*133718
18.36 13.94 7.14 8.71 1.27 2.67 2.79 12-34567-1
10 A .865 .612 .344 .500 .050 —.110 — 34967
21.97 15.54 8.74 12.70 1.27 2.79
A.973 .705 .437 .531 .050 —.110 — 33646
24.71 17.91 11.10 13.49 1.27 2.79
A.865 .612 .344 .500 .050 .105 .110 01-35775*134968
1/4 21.97 15.54 8.74 12.70 1.27 2.67 2.79 12-35775-1
16–14 M6 A.973 .705 .437 .531 .050 —.110 — 33195
2,050–5,180 24.71 17.91 11.10 13.49 1.27 2.79
[1.04–2.62] A.865 .612 .344 .500 .050 .105 .110 01-35776-1 34969
5/16 21.97 15.54 8.74 12.70 1.27 2.67 2.79
M8 A.973 .705 .437 .531 .050 —.110 — 33647
24.71 17.91 11.10 13.49 1.27 2.79
A.973 .705 .437 .531 .050 .105 .110 0-322832-1 33648
24.71 17.91 11.10 13.49 1.27 2.67 2.79
3/8 A1.271 .893 .625 .750 .050 .105 .110 0-327732-1 34829
32.28 22.68 15.88 19.05 1.27 2.67 2.79
A1.271 .893 .625 .750 .050 .105 .110 0-321165*134830
1/2 32.28 22.68 15.88 19.05 1.27 2.67 2.79
M12 A1.896 1.268 1.000 1.250 .050 —.110 — 36199
48.16 32.21 25.40 31.75 1.27 2.79
5/8 A1.896 1.268 1.000 1.250 .050 .105 .110 0-320758-1 36200
M16 48.16 32.21 25.40 31.75 1.27 2.67 2.79
3/4 A 1.896 1.268 1.000 1.250 .050 .105 .110 0-320759-1 36201
48.16 32.21 25.40 31.75 1.27 2.67 2.79
10 C 1.273 .977 .443 .587 .095 .177 —0-331414-1 —
32.33 24.82 11.25 14.91 2.41 4.50
8C.949 .696 .240 .500 .095 .177 —0-330968-1 —
13,100–20,800 1/4 24.10 17.68 6.10 12.70 2.41 4.50
[6.64–10.5] M6 C.933 .696 .250 .468 .095 .177 —0-332042-1 —
23.70 17.68 6.35 11.89 2.41 4.50
5/16 C1.273 .977 .443 .587 .095 .177 — 1-331414-1 —
M8 32.33 24.82 11.25 14.91 2.41 4.50
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 16 to 8,
CMA 2,050 to 20,800
[1.04 to 10.5 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
AC
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
23
Heavy Duty Ring Tongue Terminals (Continued)
Wire Size Dimensions Material
Circular Mils Stud Style L E C W Thickness Wire Barrel I.D. Min. Part Numbers
[mm2]Size Max. Max. Max. Solistrand Solistrand
10 B 1.184 .931 .370 .500 .095 .232 2-330969-1
30.07 23.65 9.40 12.70 2.41 5.89
B1.184 .931 .370 .500 .095 .232 330969
61/4 30.07 23.65 9.40 12.70 2.41 5.89
20,800–33,100 M6 C1.415 1.100 .454 .625 .095 .232 331417
[10.5–16.8]35.94 27.94 11.53 15.88 2.41 5.89
3/8 C 1.415 1.100 .454 .625 .095 .232 1-331417-1
35.94 27.94 11.53 15.88 2.41 5.89
B1.230 .977 .390 .500 .095 .296 330970
1/4 31.24 24.82 9.91 12.70 2.41 7.52
4M6 C1.535 1.193 .456 .679 .095 .296 331420
33,100–52,600 38.99 30.30 11.58 17.25 2.41 7.52
[16.8–26.7] 5/16 C1.535 1.193 .456 .679 .095 .296 1-331420-0
M8 38.99 30.30 11.58 17.25 2.41 7.52
3/8 C 1.535 1.193 .456 .679 .095 .296 1-331420-1
38.99 30.30 11.58 17.25 2.41 7.52
23/8 C 1.745 1.315 .639 .855 .095 .375 1-331423-0
52,600–83,700 44.32 33.40 16.23 21.72 2.41 9.53
[26.7–42.4] 1/2 C1.745 1.315 .639 .855 .095 .375 1-331423-1
M12 44.32 33.40 16.23 21.72 2.41 9.53
1/0 3/8 B 1.928 1.519 .691 .822 .095 .439 1-331880-0
83,700–119,500 48.97 38.58 17.55 20.88 2.41 11.15
[42.4–60.6] 1/2 B1.928 1.519 .691 .822 .095 .439 1-331880-1
M12 48.97 38.58 17.55 20.88 2.41 11.15
Wire Size Range
AWG 6 to 1/0,
CMA 20,800 to 119,500
[10.5 to 60.6 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B C
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
24
Rectangular Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C W X Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
2.551 .431 .250 .182 .115 .033 —.065 — 320870
M2 14.00 10.95 6.35 4.62 2.92 0.84 1.65
.529 .384 .203 .213 .140 .033 —.065 — 32579
13.44 9.75 5.16 5.41 3.56 0.84 1.65
4.670 .517 .237 .237 .143 .033 .061 .065 328363 328349
17.02 13.13 6.02 6.02 3.63 0.84 1.55 1.65
.551 .431 .250 .182 .115 .033 .061 .065 323119 322408
14.00 10.95 6.35 4.62 2.92 0.84 1.55 1.65
.811 .606 .404 .237 .195 .033 —.065 — 327955
20.60 15.39 10.26 6.02 4.95 0.84 1.65
22-16 6.982 .745 .465 .302 .227 .033 .061 .065 328353 328339
509–3,260 M3.5 24.94 18.92 11.81 7.67 5.77 0.84 1.55 1.65
[0.26–1.65] .670 .462 .281 .312 .203 .033 .061 .065 323112 321691
17.02 11.73 7.14 7.92 5.16 0.84 1.55 1.65
8.982 .745 .465 .302 .227 .033 .061 .065 328355 328341
M4 24.94 18.92 11.81 7.67 5.77 0.84 1.55 1.65
.748 .540 .281 .312 .203 .033 .061 — 330539 —
19.00 13.72 7.14 7.92 5.16 0.84 1.55
10 .670 .462 .281 .375 .203 .033 .061 .065 323106 34525
17.02 11.73 7.14 9.53 5.16 0.84 1.55 1.65 2-323106-1
.546 .399 .218 .344 .142 .033 .061 .065 34459 31821
13.87 10.13 5.54 8.74 3.61 0.84 1.55 1.65
4.576 .462 .281 .215 .109 .033 —.089 — 31691
14.63 11.73 7.14 5.46 2.77 0.84 2.26
5.632 .479 .277 .277 .143 .033 —.089 — 327951
M3 16.05 12.17 7.04 7.04 3.63 0.84 2.26
.560 .368 .187 .250 .187 .033 .085 .089 320815 320814
614.22 9.35 4.75 6.35 4.75 0.84 2.16 2.26
M3.5 .529 .384 .203 .296 .140 .033 .085 .089 34266 31813
16–14 13.44 9.75 5.16 7.52 3.56 0.84 2.16 2.26 2-34266-1
2,050–5,180 .633 .493 .312 .244 .125 .033 —.089 — 35278
[1.04–2.62] 816.08 12.52 7.92 6.20 3.18 0.84 2.26
M4 .982 .745 .465 .302 .227 .033 .085 .089 328356 328342
24.94 18.92 11.81 7.67 5.77 0.84 2.16 2.26
10 .717 .462 .281 .312 .250 .033 .085 .089 320819 320818
18.21 11.73 7.14 7.92 6.35 0.84 2.16 2.26
12 .951 .618 .437 .375 .328 .033 —.089 — 320820
24.16 15.70 11.10 9.53 8.33 0.84 2.26
Note: Part numbers are shown as loose piece over tape mounted product.
Wire Size Range
AWG 22 to 14,
CMA 509 to 5,180
[0.26 to 2.62 mm2]
Material
Terminal Body —Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
25
Rectangular Tongue Terminals (Continued)
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C W X Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
4.679 .526 .237 .237 .143 .042 .129 .134 328050 327971
17.25 13.36 6.02 6.02 3.63 1.07 3.28 3.40
5.719 .566 .277 .277 .143 .042 —.134 — 327953
M3 18.26 14.38 7.04 7.04 3.63 1.07 3.40
.631 .486 .218 .290 .140 .042 .129 .134 321499 33426
16.03 12.34 5.54 7.37 3.56 1.07 3.28 3.40 2-321499-1
6.898 .693 .404 .237 .195 .042 —.134 — 327959
12–10 M3.5 22.81 17.60 10.26 6.02 4.95 1.07 3.40
5,180–13,100 1.006 .736 .468 .296 .265 .042 .129 .134 322946 322945
[2.62–6.64] 25.55 18.69 11.89 7.52 6.73 1.07 3.28 3.40
8.924 .754 .465 .302 .160 .042 —.134 — 331269
M4 23.47 19.15 11.81 7.67 4.06 1.07 3.40
10 .843 .588 .320 .312 .250 .042 .129 .134 321558 321557
21.41 14.94 8.13 7.92 6.35 1.07 3.28 3.40
1/4 1.069 .736 .468 .469 .328 .042 .129 .134 320823 320822
M6 27.15 18.69 11.89 11.91 8.33 1.07 3.28 3.40
Note: Part numbers are shown as loose piece over tape mounted product.
Wire Size Range
AWG 12 to 10,
CMA 5,180 to 13,100
[2.62 to 6.64 mm2]
Material
Terminal Body — Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
26
Spade Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C W X Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
26–22 0.280 .213 .078 .125 .062 .020 —.035 — 32501
202–810 7.11 5.41 1.98 3.18 1.57 0.51 0.89
[0.1–0.41] 4.431 .346 .211 .203 .076 .020 —.035 — 34247
10.95 8.79 5.36 5.16 1.93 0.51 0.89
2.504 .384 .203 .182 .115 .033 .061 .065 2-53555-1* 328395
M2 12.80 9.75 5.16 4.62 2.92 0.84 1.55 1.65 2-53555-2*
4.451 .337 .156 .218 .109 .033 .061 .065 321463 323834
11.46 8.56 3.96 5.54 2.77 0.84 1.55 1.65 2-321463-1
.685 .493 .312 .375 .187 .033 —.065 — 31634
17.40 12.52 7.92 9.53 4.75 0.84 1.65
6.530 .384 .203 .297 .141 .033 .061 .065 36195* 33765
M3.5 13.46 9.75 5.16 7.54 3.58 0.84 1.55 1.65 2-36195-3*
22–16 .623 .493 .312 .250 .125 .033 .061 .065 323127* 34518*
509–3,260 15.82 12.52 7.92 6.35 3.18 0.84 1.55 1.65
[0.26–1.65] .685 .493 .312 .375 .187 .033 .061 .065 34117* 31635*
817.40 12.52 7.92 9.53 4.75 0.84 1.55 1.65 2-34117-2*
M4 .653 .477 .296 .343 .171 .033 —.065 — 323823
16.59 12.12 7.52 8.71 4.34 0.84 1.65
.733 .572 .312 .344 .156 .033 .061 — 34583 34582
18.62 14.53 7.92 8.74 3.96 0.84 1.55
10 .685 .493 .312 .375 .187 .033 .061 .065 34118* 31636*
17.40 12.52 7.92 9.53 4.75 0.84 1.55 1.65 2-34118-2*
.685 .493 .312 .385 .187 .033 —.089 — 31704
17.40 12.52 7.92 9.78 4.75 0.84 2.26
6.530 .384 .203 .297 .141 .033 .085 .089 2-322996*133202*
M3.5 13.46 9.75 5.16 7.54 3.58 0.84 2.16 2.26 2-322996-1
.623 .493 .312 .244 .125 .033 .085 .089 330827 33221
15.82 12.52 7.92 6.20 3.18 0.84 2.16 2.26
16–14 .685 .493 .312 .385 .187 .033 .085 .089 34128* 31705*
2,050–5,180 817.40 12.52 7.92 9.78 4.75 0.84 2.16 2.26
[1.04–2.62] M4 .530 .384 .203 .297 .141 .033 .085 .089 36880 35116
13.46 9.75 5.16 7.54 3.58 0.84 2.16 2.26 2-36880-1
.764 .572 .312 .385 .187 .033 .085 .089 33219* 31442
19.41 14.53 7.92 9.78 4.75 0.84 2.16 2.26
10 .685 .493 .312 .385 .187 .033 .085 .089 34129* 31706
17.40 12.52 7.92 9.78 4.75 0.84 2.16 2.26
.733 .572 .312 .344 .156 .033 .085 — 324521 —
18.62 14.53 7.92 8.74 3.96 0.84 2.16
.772 .564 .296 .406 .203 .042 —.134 — 31587
19.61 14.33 7.52 10.31 5.16 1.07 3.40
6.631 .486 .218 .282 .140 .042 .129 .134 322451* 34384
M3.5 16.03 12.34 5.54 7.16 3.56 1.07 3.28 3.40
.772 .564 .296 .312 .203 .042 —.134 — 35493
19.61 14.33 7.52 7.92 5.16 1.07 3.40
12–10 .991 .757 .468 .312 .250 .042 .129 .134 325196 325195
5,180–13,100 825.17 19.23 11.89 7.92 6.35 1.07 3.28 3.40
[2.62–6.64] M4 .772 .564 .296 .406 .203 .042 .129 .134 32995* 31588*
19.61 14.33 7.52 10.31 5.16 1.07 3.28 3.40
.772 .564 .296 .406 .203 .042 .129 .134 33479* 31589
19.61 14.33 7.52 10.31 5.16 1.07 3.28 3.40 2-33479-1*
10 .772 .564 .296 .375 .203 .042 .129 .134 35495* 35494*
19.61 14.33 7.52 9.53 5.16 1.07 3.28 3.40 2-35495-2*
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
27
Short Spring Spade Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C W X Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
2.455 .341 .206 .171 .109 .020 —.034 — 53000-1
M2 11.56 8.66 5.23 4.34 2.77 0.51 0.86
4.499 .354 .219 .203 .140 .020 —.034 — 53001-1
12.67 8.99 5.56 5.16 3.56 0.51 0.86
26–22 5.483 .338 .203 .250 .140 .020 —.034 — 53002-1
202–810 M3 12.27 8.59 5.16 6.35 3.56 0.51 0.86
[0.1–0.41] 6.483 .338 .203 .250 .140 .020 —.034 — 53003-1
M3.5 12.27 8.59 5.16 6.35 3.56 0.51 0.86
8.591 .416 .281 .375 .170 .020 —.034 — 53004-1
M4 15.01 10.57 7.14 9.53 4.32 0.51 0.86
4.576 .431 .250 .203 .140 .033 .061 .065 53175-1* 53150-2
14.63 10.95 6.35 5.16 3.56 0.84 1.55 1.65
5.576 .431 .250 .250 .140 .033 —.065 — 53005-1
M3 14.63 10.95 6.35 6.35 3.56 0.84 1.65
.576 .431 .250 .250 .140 .033 .061 .065 53120-1* 53006-1
614.63 10.95 6.35 6.35 3.56 0.84 1.55 1.65 53120-2*
M3.5 .576 .431 .250 .234 .140 .033 .061 .065 53830-1*53266-2
14.63 10.95 6.35 5.94 3.56 0.84 1.55 1.65 53830-2*
22–16 .637 .462 .281 .375 .170 .033 .061 .065 53121-1*53007-1
509–3,260 816.18 11.73 7.14 9.53 4.32 0.84 1.55 1.65
[0.26–1.65] M4 .637 .462 .281 .244 .170 .033 .061 .065 53831-1* 53267-2
16.18 11.73 7.14 6.20 4.32 0.84 1.55 1.65 53831-2*
10 .685 .462 .281 .294 .218 .033 .061 .065 53832-1*53268-2
17.40 11.73 7.14 7.47 5.54 0.84 1.55 1.65 53832-2*
1/4-28 UNF .810 .524 .343 .625 .281 .033 —.065 — 53235-2
M6 20.57 13.31 8.71 15.88 7.14 0.84 1.65
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body— Phosphor Bronze
per ASTM B-103
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
28
Short Spring Spade Tongue Terminals (Continued)
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C W X Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
5.576 .431 .250 .250 .140 .033 .085 .089 53177-1*53009-1
M3 14.63 10.95 6.35 6.35 3.56 0.84 2.16 2.26
6.576 .431 .250 .250 .140 .033 .085 .089 53123-1* 53010-1
M3.5 14.63 10.95 6.35 6.35 3.56 0.84 2.16 2.26 53123-2*
.637 .462 .281 .375 .170 .033 .085 .089 53124-1* 53011-1
16–14 816.18 11.73 7.14 9.53 4.32 0.84 2.16 2.26 53124-2*
2,050–5,180 M4 .637 .462 .281 .244 .170 .033 .085 .089 53833-1*53270-2
[1.04–2.62]16.18 11.73 7.14 6.20 4.32 0.84 2.16 2.26 53833-2*
.685 .462 .281 .406 .218 .033 .085 .089 53125-1* 53012-1
17.40 11.73 7.14 10.31 5.54 0.84 2.16 2.26 53125-2*
10 .685 .462 .281 .294 .218 .033 .085 .089 53834-1*53271-2
17.40 11.73 7.14 7.47 5.54 0.84 2.16 2.26 53834-2*
1/4-28 UNF .810 .524 .343 .625 .281 .033 —.089 — 53032-1
M6 20.57 13.31 8.71 15.88 7.14 0.84 2.26
5.636 .447 .169 .250 .184 .042 —.134 — 53013-1
M3 16.15 11.35 4.29 6.35 4.67 1.07 3.40
6.636 .452 .174 .250 .179 .042 .129 .134 53126-1* 53014-1
M3.5 16.15 11.48 4.42 6.35 4.55 1.07 3.28 3.40 53126-2*
.729 .554 .276 .375 .170 .042 .129 .134 53127-1* 53015-1
818.52 14.07 7.01 9.53 4.32 1.07 3.28 3.40 53127-2*
12–10 M4 .729 .554 .276 .312 .170 .042 .129 .134 53835-1*53273-2
5,180–13,100 18.52 14.07 7.01 7.92 4.32 1.07 3.28 3.40 53835-2*
[2.62–6.64] .777 .554 .276 .406 .218 .042 .129 .134 53128-1* 53016-1
19.74 14.07 7.01 10.31 5.54 1.07 3.28 3.40 53128-2*
10 .777 .554 .276 .312 .218 .042 .129 .134 53836-1*53274-2
19.74 14.07 7.01 7.92 5.54 1.07 3.28 3.40 53836-2*
1/4-28 UNF .902 .616 .338 .375 .281 .042 —.134 — 53226-2
M6 22.91 15.65 8.59 9.53 7.14 1.07 3.40
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 16 to 10,
CMA 2,050 to 13,100
[1.04 to 6.64 mm2]
Material
Terminal Body— Phosphor Bronze
per ASTM B-103
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
29
Long Spring Spade Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C W X Thickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
4.637 .341 .206 .203 .276 .020 —.034 — 52733-1
26–22 16.18 8.66 5.23 5.16 7.01 0.51 0.86
202–810 6.666 .370 .235 .250 .276 .020 —.034 — 52734-1
[0.1–0.41]M3.5 16.92 9.40 5.97 6.35 7.01 0.51 0.86
8.696 .400 .265 .281 .290 .020 —.034 — 52735-1
M4 17.68 10.16 6.73 7.14 7.37 0.51 0.86
4.673 .392 .201 .203 .276 .033 —.065 — 53047-1
17.09 9.96 5.11 5.16 7.01 0.84 1.65
6.709 .429 .238 .250 .276 .033 .061 .065 52709-1*52700-1
22–16 M3.5 18.01 10.90 6.05 6.35 7.01 0.84 1.55 1.65
509–3,260 8.756 .461 .270 .281 .290 .033 .061 .065 52710-1* 52701-1
[0.26–1.65]M4 19.20 11.71 6.86 7.14 7.37 0.84 1.55 1.65 52710-2*
10 .782 .474 .283 .343 .303 .033 —.065 — 52702-1
19.86 12.04 7.19 8.71 7.70 0.84 1.65
1/4-28 UNF .879 .536 .340 .437 .333 .033 —.065 — 53111-2
M6 22.33 13.61 8.64 11.10 8.46 0.84 1.65
6.709 .429 .238 .250 .276 .033 .085 .089 52712-1* 52703-1
M3.5 18.01 10.90 6.05 6.35 7.01 0.84 2.16 2.26
16–14 8.756 .461 .270 .281 .290 .033 .085 .089 52713-1* 52704-1
2,050–5,180 M4 19.20 11.71 6.86 7.14 7.37 0.84 2.16 2.26 52713-2*52704-3
[1.04–2.62] 10 .782 .474 .283 .343 .303 .033 .085 .089 52714-1* 52705-1
19.86 12.04 7.19 8.71 7.70 0.84 2.16 2.26
1/4-28 UNF .879 .536 .345 .437 .338 .033 —.089 — 53033-1
M6 22.33 13.61 8.76 11.10 8.59 0.84 2.26
6.808 .520 .242 .312 .283 .042 .129 .134 52715-1*52706-1
M3.5 20.52 13.21 6.15 7.92 7.19 1.07 3.28 3.40
12–10 8.851 .551 .273 .375 .295 .042 .129 .134 52716-1*52707-1
5,180–13,100 M4 21.62 14.00 6.93 9.53 7.49 1.07 3.28 3.40 52716-2*52707-3
[2.62–6.64] 10 .896 .583 .305 .375 .308 .042 .129 .134 52717-1*52708-1
22.76 14.81 7.75 9.53 7.82 1.07 3.28 3.40 52717-2*
1/4-28 UNF .966 .623 .345 .437 .338 .042 —.134 — 52772-1
M6 24.54 15.82 8.76 11.10 8.59 1.07 3.40
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body— Phosphor Bronze
per ASTM B-103
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
30
Flanged Spade Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C W X HThickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Min. Max.
2.453 .338 .203 .182 .110 .026 .020 —.035 —1324599-1
26–22 M2 11.51 8.59 5.16 4.62 2.79 0.66 0.51 0.89
202–810 4.453 .338 .203 .193 .110 .026 .020 —.035 —1-52512-1
[0.1–0.41] 11.51 8.59 5.16 4.90 2.79 0.66 0.51 0.89
6.453 .338 .203 .250 .110 .026 .020 —.035 —1-51875-1
M3.5 11.51 8.59 5.16 6.35 2.79 0.66 0.51 0.89
2.504 .384 .203 .182 .115 .041 .033 .061 .065 2-324605*11324604-1
M2 12.80 9.75 5.16 4.62 2.92 1.04 0.84 1.55 1.65
.514 .384 .203 .296 .125 .045 .033 .061 .065 2-320749*1 1-32418-1
613.06 9.75 5.16 7.52 3.18 1.14 0.84 1.55 1.65 2-320749-2
22–16 M3.5 .514 .384 .203 .250 .125 .045 .033 .061 .065 2-323136*1 1322776-1
509–3,260 13.06 9.75 5.16 6.35 3.18 1.14 0.84 1.55 1.65 2-323136-1
[0.26–1.65] .607 .431 .250 .416 .171 .062 .033 .061 .065 2-323124*11-32494-1
815.42 10.95 6.35 10.57 4.34 1.57 0.84 1.55 1.65
M4 .514 .384 .203 .296 .125 .045 .033 .061 .065 2-52730*11-32418-2
13.06 9.75 5.16 7.52 3.18 1.14 0.84 1.55 1.65 2-52730-1 1-32418-4
10 .514 .384 .203 .296 .125 .045 .033 —.065 —1328522-1
13.06 9.75 5.16 7.52 3.18 1.14 0.84 1.65
6.514 .384 .203 .294 .125 .047 .033 .085 .089 2-320855*1 1320852-1
M3.5 13.06 9.75 5.16 7.47 3.18 1.19 0.84 2.16 2.26 2-320855-1
16–14 8.514 .384 .203 .294 .125 .047 .033 .085 .089 2-320856*1 1320853-1
2,050–5,180 M4 13.06 9.75 5.16 7.47 3.18 1.19 0.84 2.16 2.26 2-320856-1
[1.04–2.62] 10 .514 .384 .203 .294 .125 .047 .033 .085 .089 2-320857*1 1320854-1
13.06 9.75 5.16 7.47 3.18 1.19 0.84 2.16 2.26 2-320857-1
6.694 .518 .250 .296 .171 .052 .042 .129 .134 2-324578-0 1324579-1
12-10 M3.5 17.63 13.16 6.35 7.52 4.34 1.32 1.07 3.28 3.40 1-324578-0
5,180–13,100 8.694 .518 .250 .416 .171 .052 .042 .129 .134 2-323143-0 1-32416-1
[2.62–6.64] M4 17.63 13.16 6.35 10.57 4.34 1.32 1.07 3.28 3.40
10 .694 .518 .250 .416 .171 .052 .042 .129 .134 2-323144-0 1322725-1
17.63 13.16 6.35 10.57 4.34 1.32 1.07 3.28 3.40 2-323144-1
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
31
Slotted Ring Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C WThickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
26–22 6.523 .416 .281 .250 .020 —.035 — 322211-0202–810 M3.5 13.28 10.57 7.14 6.35 0.51 0.89
[0.1–0.41]
4.425 .353 .172 .182 .033 .061 .065 2-321288*0323838-0
10.80 8.97 4.37 4.62 0.84 1.55 1.65
6.423 .337 .156 .218 .033 .061 .065 2-321289-0 323835-0
22–16 M3.5 10.74 8.56 3.96 5.54 0.84 1.55 1.65 2-321289-1
509–3,260 8.547 .431 .250 .281 .033 .061 .065 2-323129-0 36953-0
[0.26–1.65] 13.89 10.95 6.35 7.14 0.84 1.55 1.65
10 .588 .462 .281 .312 .033 —.065 — 323832-0
14.94 11.73 7.14 7.92 0.84 1.65
1/4 .816 .618 .437 .469 .033 .061 .065 2-321809-0 323837-0
20.73 15.70 11.10 11.91 0.84 1.55 1.65 2-321809-1
6.459 .352 .171 .250 .033 .085 .089 2-322514-0 35555-0
M3.5 11.66 8.94 4.34 6.35 0.84 2.16 2.26
16–14 8.616 .462 .281 .344 .033 —.089 — 34520-0
2,050–5,180 M4 15.65 11.73 7.14 8.74 0.84 2.26
[1.04–2.62]10 .604 .462 .281 .343 .033 —.089 — 328872-0
15.34 11.73 7.14 8.71 0.84 2.26
1/4 .816 .618 .437 .469 .033 —.089 — 36216-0
M6 20.73 15.70 11.10 11.91 0.84 2.26
12–10 1/4 .952 .736 .468 .531 .042 .129 .134 21-35680*055812-25,180–13,100 M6 24.18 18.69 11.89 13.49 1.07 3.28 3.40
[2.62–6.64]
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 26 to 10,
CMA 202 to 13,100
[0.1 to 6.64 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
32
Hook Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud L E C WThickness Solistrand Budget Solistrand Budget
[mm2]Size Max. Max. Min. Max.
22–16 6.530 .384 .203 .281 .033 —.065 — 34261
509–3,260 M3.5 13.46 9.75 5.16 7.14 0.84 1.65
[0.26–1.65] 8.656 .482 .296 .343 .033 —.065 — 31628
M4 16.66 12.24 7.52 8.71 0.84 1.65
6.636 .462 .281 .343 .033 —.089 — 35212
M3.5 16.15 11.73 7.14 8.71 0.84 2.26
16–14 8.636 .462 .281 .343 .033 —.089 — 32503
2,050–5,180 M4 16.15 11.73 7.14 8.71 0.84 2.26
[1.04–2.62]10 .636 .462 .281 .343 .033 —.089 — 33437
16.15 11.73 7.14 8.71 0.84 2.26
12–10 10 .760 .570 .302 .375 .042 .129 .134 2-324209-0 327902
5,180–13,100 19.30 14.48 7.67 9.53 1.07 3.28 3.40 2-324209-1
[2.62–6.64] 1/4 1.004 .736 .468 .531 .042 .129 .134 2-321632-0 327905
M6 25.50 18.69 11.89 13.49 1.07 3.28 3.40 2-321632-1
Note: Part numbers are shown as loose piece over tape mounted product.
Wire Size Range
AWG 22 to 10,
CMA 509 to 13,100
[0.26 to 6.64 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Wire Size Range
AWG 22 to 8,
CMA 509 to 20,800
[0.26 to 10.5 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A B
Tab Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Style L E WThickness Solistrand Solistrand
[mm2]Max. Max. Max.
22–16 .681 .500 .125 .033 .061
509–3,260 A 17.30 12.70 3.18 0.84 1.55 323135
[0.26–1.65]
16–14 HD1
2,050–5,180 B .863 .615 .125 .050 .105 322441
[1.04–2.62] 21.92 15.62 3.18 1.27 2.67
12–10 .863 .613 .125 .042 .129
5,180–13,100 B 21.92 15.57 3.18 1.07 3.28 322443
[2.62–6.64]
8.937 .625 .221 .051 .177
13,100–20,800 B 23.80 15.88 5.61 1.30 4.50 322445
[6.64–10.5]
1Heavy Duty for extra mechanical strength.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
33
Flag Ring Tongue Terminals
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud Style L C WThickness Solistrand Solistrand
[mm2]Size Max. Min. Max.
16–14 8.579 .250 .312 .033 .085 325069*1
2,050–5,180 M4 A14.71 6.35 7.92 0.84 2.16
[1.04–2.62] 10 .579 .250 .312 .033 .085 322819*1A14.71 6.35 7.92 .084 2.16
6.702 .281 .375 .042 .129 36269*1
M3.5 A17.83 7.14 9.53 1.07 3.28
12–10 8.702 .281 .375 .042 .129 36270*1
5,180–13,100 M4 A17.83 7.14 9.53 1.07 3.28
[2.62–6.64] 10 .702 .281 .375 .042 .129 36271*1A17.83 7.14 9.53 1.07 3.28
1/4 .702 .281 .375 .042 .129 36272*1
M6 A17.83 7.14 9.53 1.07 3.28
.791 .250 .500 .043 .180 321051*1
10 B20.09 6.35 12.70 1.09 4.57
8.918 .378 .500 .043 .180 321441*1
13,100–20,800 B23.32 9.60 12.70 1.09 4.57
[6.64–10.5] 1/4 1.130 .525 .609 .043 .180 322727*1
M6 B28.70 13.34 15.47 1.09 4.57
10 .841 .250 .500 .048 .224 323196*1A21.36 6.35 12.70 1.22 5.69
61/4 .960 .371 .500 .048 .224 321576*1
20,800–33,100 M6 A24.38 9.42 12.70 1.22 5.69
[10.5–16.8] 5/16 1.200 .528 .625 .048 .224 321056*1
M8 B30.48 13.41 15.88 1.22 5.69
3/8 1.200 .528 .625 .048 .224 322204*1B30.48 13.41 15.88 1.22 5.69
10 1.048 .368 .546 .051 .280 321059*1A26.62 9.35 13.87 1.30 7.11
41/4 1.048 .368 .546 .051 .280 321275*1
33,100–52,600 M6 A26.62 9.35 13.87 1.30 7.11
[16.8–26.7] 5/16 1.278 .530 .682 .051 .280 321060*1
M8 B32.46 13.46 17.32 1.30 7.11
3/8 1.278 .530 .682 .051 .280 321121*1B32.46 13.46 17.32 1.30 7.11
10 1.437 .534 .713 .060 .357 321063*1B36.50 13.56 18.11 1.52 9.07
1/4 1.437 .534 .713 .060 .357 321201*1
2M6 B36.50 13.56 18.11 1.52 9.07
52,600–83,700 5/16 1.437 .534 .713 .060 .357 321064*1
[26.7–42.4] M8 B36.50 13.56 18.11 1.52 9.07
3/8 1.437 .534 .713 .060 .357 321253*1B36.50 13.56 18.11 1.52 9.07
10 mm 1.437 .534 .713 .060 .357 184147-1B 36.50 13.56 18.11 1.52 9.07
*Part numbers are available in small quantity packages.
Wire Size Range
AWG 16 to 2,
CMA 2,050 to 83,700
[1.04 to 42.4 mm2]
Material
Terminal Body —Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
B
A
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
34
Flag Ring Tongue Terminals (Continued)
Wire Size Dimensions Material Wire Barrel I.D. Min. Part Numbers
Circular Mils Stud Style L C WThickness Solistrand Solistrand
[mm2]Size Max. Min. Max.
1/4 1.733 .666 .875 .073 .444 322215-1
M6 A44.02 16.92 22.23 1.85 11.28
1/0 5/16 1.733 .666 .875 .073 .444 321580-1
83,700–119,500 M8 A44.02 16.92 22.23 1.85 11.28
[42.4–60.6]3/8 1.733 .666 .875 .073 .444 321066-1A44.02 16.92 22.23 1.85 11.28
1/2 1.733 .666 .875 .073 .444 321123-1
M12 A44.02 16.92 22.23 1.85 11.28
2/0 5/16 1.848 .671 .920 .083 .504 321582-1
119,500–150,500 M8 A46.94 17.04 23.37 2.11 12.80
[60.6–76.3] 3/8 1.848 .671 .920 .083 .504 321584-1A46.94 17.04 23.37 2.11 12.80
3/0 2.001 .676 1.056 .094 .565
150,500–190,000 3/8 A 50.83 17.17 26.82 2.39 14.35 327887-1
[76.3–96.3] 5/16 2.131 .681 1.115 .105 .635 321277-1
4/0 M8 A54.13 17.30 28.32 2.67 16.13
190,000-231,000 3/8 2.131 .681 1.115 .105 .635 321277-1
[96.3–117]A54.13 17.30 28.32 2.67 16.13
1/2 2.131 .681 1.115 .105 .635 321259-1
M12 A54.13 17.30 28.32 2.67 16.13
Wire Size Range
AWG 1/0 to 4/0,
CMA 83,700 to 231,000
[42.4 to 117 mm2]
Material
Terminal Body— Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
35
Parallel Splices
Wire Size Dimensions Material Part Numbers
Circular Mils1L I.D. O.D. Thickness Solistrand
[mm2]Max. Min. Max. Max.
22–16 .301 .061 .141 .033 34130*
509–3,260 7.65 1.55 3.58 0.84
[0.26–1.65]
16–14 .301 .085 .165 .033 34137*2,050–5,180 7.65 2.16 4.19 0.84
[1.04–2.62]
12–10 .343 .129 .226 .042 34138*5,180–13,100 8.71 3.28 5.74 1.07
[2.62–6.64]
8.375 .172 .296 .051 34318*13,100–20,800 9.53 4.37 7.52 1.30
[6.64–10.5]
6.437 .232 .369 .060 34319*
20,800–33,100 11.10 5.89 9.37 1.52
[10.5–16.8]
4.531 .296 .463 .073 34320*
33,100–52,600 13.49 7.52 11.76 1.85
[16.8–26.7]
2.640 .370 .539 .073 35187*
52,600–83,700 16.26 9.40 13.69 1.85
[26.7–42.4]
1/0 .734 .444 .613 .073 36946*
83,700–119,500 18.64 11.28 15.57 1.85
[42.4–60.6]
2/0 .734 .504 .703 .083 36948*
119,500–150,500 18.64 12.80 17.86 2.11
[60.6–76.3]
3/0 .749 .565 .775 .094 36909*
150,500–190,000 19.02 14.35 19.69 2.39
[76.3–96.3]
4/0 .765 .635 .869 .105 36951*
190,000–231,000 19.43 16.13 22.07 2.67
[96.3–117]
250–300 MCM 1.062 .753 1.054 .130 322275*
231,000–300,000 26.97 19.13 26.77 3.30
[117–152]
300–350 MCM 1.124 .819 1.137 .140 322276*
300,000–380,000 28.55 20.80 28.88 3.56
[152–193]
400 MCM 1.249 .925 1.287 .158 322277*
380,000–478,000 31.72 23.50 32.69 4.01
[193–242]
500–600 MCM 1.421 1.070 1.483 .182 322278*
478,000–600,000 36.09 27.18 37.67 4.62
[242–304]
*Part numbers are available in small quantity packages.
1When terminating two or more wires in a parallel splice, the combined cross sectional area must be within the listed circular mil area range (CMA).
Wire Size Range
AWG 22 to 600 MCM,
CMA 509 to 600,000
[0.26 to 304 mm2]
Material
Splice Body —Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
36
Butt Splices
Wire Size Solistrand Budget Material
Circular Mils1Dimensions Dimensions Thickness Part Numbers
[mm2]Style L I.D. O.D. L I.D. O.D. Max. Solistrand Budget
Max. Min. Max. Max. Min. Max.
26–22 Strap .385 .031 .082 .385 .034 .077 .020 1321198*1321024-0
202–810 9.78 0.79 2.08 9.78 0.86 1.96 0.51
[0.1–0.41]
24–20 Strap .490 .043 .105 .025 --324001*1—
320–1,290 12.45 1.09 2.67 — — — 0.64
[0.16–0.65]
Strap .591 .061 .141 .591 .065 .136 .033 2-321801-3 21-32463-0
22–16 15.01 1.55 3.58 15.01 1.65 3.45 0.84 2-321801-4
509–3,260 Standard .578 .061 .141 .578 .065 .136 .033 2131818*121-34226*0
[0.26–1.65] 14.68 1.55 3.58 14.68 1.65 3.45 0.84 -2-31818-1
Sight .578 .061 .141 ——— .033 1330367*1—
Hole 14.68 1.55 3.58 0.84
Strap .591 .085 .165 .591 .089 .160 .033 1322459-1 21-32464-0
15.01 2.16 4.19 15.01 2.26 4.06 0.84
16–14 Standard .567 .085 .165 .567 .089 .160 .033 2131819*121-34227*0
2,050–5,180 14.40 2.16 4.19 14.40 2.26 4.06 0.84 2-31819-1
[1.04–2.62] Strap .591 .085 .165 ——— .033 1327025*1—
15.01 2.16 4.19 0.84 (No Wire Stop)
Sight .567 .085 .165 ——— .033 1330368*1—
Hole 14.40 2.16 4.19 0.84
14–12 Sight .690 .098 .178 ——— .033 1321280-1 —
3,260–8,230 Hole 17.53 2.49 4.52 0.84
[1.65–4.17]
Strap — — — .703 .134 .221 .042 —21-30953-0
17.86 3.40 5.61 1.07
12–10 Sight .567 .129 .226 ——— .042 1330369*1—
5,180–13,100 Hole 14.40 3.28 5.74 1.07
[2.62–6.64]Standard .565 .129 .226 .565 .134 .221 .042 21-32151*1 21-34228*0
14.35 3.28 5.74 14.35 3.40 5.61 1.07
Strap .765 .129 .226 .765 .134 .221 .042 1324893-1 1-324898-0
19.43 3.28 5.74 19.43 3.40 5.61 1.07
8 Standard .827 .172 .296 ——— .051 21-34321*1—
13,100–20,800 21.01 4.37 7.52 1.30
[6.64–10.5] Sight .827 .172 .296 ——— .051 2136906*1—
Hole 21.01 4.37 7.52 1.30
6 Standard 1.015 .232 .369 ——— .060 2134322*1—
20,800–33,100 25.78 5.89 9.37 1.52
[10.5–16.8] Sight 1.015 .232 .369 ——— .060 2136886*1—
Hole 25.78 5.89 9.37 1.52
4 Standard 1.140 .296 .463 ——— .073 2134323*1—
33,100–52,600 28.96 7.52 11.76 1.85
[16.8–26.7] Sight 1.140 .296 .463 ——— .073 1320238-1 —
Hole 28.96 7.52 11.76 1.85
2Standard 1.265 .370 .539 ——— .073 35189* —
52,600–83,700 32.13 9.40 13.69 1.85
[26.7–42.4] Sight 1.265 .370 .539 ——— .073 322246*—
Hole 32.13 9.40 13.69 1.85
Note: Part numbers are shown as loose piece over tape mounted product.
*Part numbers are available in small quantity packages.
1When terminating two or more wires in either end of a butt splice, the combined cross sectional area must be within the listed circular mil area range (CMA).
Wire Size Range
AWG 26 to 2,
CMA 202 to 83,700
[0.1 to 42.4 mm2]
Material
Splice Body —Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
Standard Sight Hole Strap
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
37
Butt Splices (Continued)
Wire Solistrand Material
Circular Mils1Dimensions Thickness Part Numbers
[mm2]Style L I.D. O.D. Max. Solistrand
Max. Min. Max.
1/0 1.412 .444 .613 .073 36957*
83,700–119,500 A 35.86 11.28 15.57 1.85
[42.4–60.6]
2/0 1.437 .504 .693 .083 36958*
119,500–150,500 A 36.50 12.80 17.60 2.11
[60.6–76.3]
3/0 1.480 .565 .775 .094 36959*
150,500–190,000 A 37.60 14.35 19.69 2.39
[76.3–96.3]
4/0 1.484 .635 .869 .105 36960*
190,000–231,000 A 37.69 16.13 22.07 2.67
[96.3–117]
250–300 MCM 2.093 .753 1.054 .130 322279*
231,000–300,000 A 53.16 19.13 26.77 3.30
[117–152]
300–350 MCM 2.217 .819 1.137 .140 322280*
300,000–380,000 A 56.31 20.80 28.88 3.56
[152–193]
400 MCM 2.467 .925 1.287 .158 322281*
380,000–478,000 A 62.66 23.50 32.69 4.01
[193–242]
500–600 MCM 2.811 1.070 1.483 .182 322282*
478,000–600,000 A 71.40 27.18 37.67 4.62
[242–304]
*Part numbers are available in small quantity packages.
1When terminating two or more wires in either end of a butt splice, the combined cross sectional area must be within the listed circular mil area range (CMA).
Wire Size Range
AWG 1/0 to 600 MCM,
CMA 83,700 to 600,000
[42.4 to 304 mm2]
Material
Splice Body —Copper per
ASTM B-152
Plating — Tin per MIL-T-10727
A
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
38
Ring Tongue Terminals
Wire Size Dimensions Material Wire Part Numbers
Circular Mils Stud L E C WThickness Insulation Loose Tape
[mm2]Size Max. Max. Min. Max. Dia. Max. Piece Mounted
0.464 .391 .121 .140 .020 .082 31516 —
11.79 9.93 3.07 3.56 0.51 2.08
.464 .391 .121 .140 .020 .082 31518 2-31518-1
211.79 9.93 3.07 3.56 0.51 2.08
M2 .564 .481 .211 .165 .020 .082 32162111-321621-01
14.33 12.22 5.36 4.19 0.51 2.08
26–22 4.585 .481 .211 .203 .020 .082 31679 2-31679-1
202–810 14.86 12.22 5.36 5.16 0.51 2.08
[0.1–0.41] .585 .481 .211 .203 .020 .082 31681 2-31681-2
614.86 12.22 5.36 5.16 0.51 2.08
M3.5 .679 .551 .281 .250 .020 .082 32861 2-32861-2
17.25 14.00 7.14 6.35 0.51 2.08
8.679 .551 .281 .250 .020 .082 32862 2-32862-1
M4 17.25 14.00 7.14 6.35 0.51 2.08
2.600 .507 .172 .182 .033 .125 320678 —
M2 15.24 12.88 4.37 4.62 0.84 3.18
4.603 .491 .156 .218 .033 .125 31094 —
15.32 12.47 3.96 5.54 0.84 3.18
.775 .616 .281 .312 .033 .125 30995 —
19.69 15.65 7.14 7.92 0.84 3.18
.603 .491 .156 .218 .033 .125 31096 2-31096-1
15.32 12.47 3.96 5.54 0.84 3.18
.775 .616 .281 .312 .033 .140 31159 2-31159-1
619.69 15.65 7.14 7.92 0.84 3.56
M3.5 .728 .585 .250 .281 .033 .125 31269 2-31269-1
18.49 14.86 6.35 7.14 0.84 3.18
.603 .491 .156 .218 .033 .140 31393 —
15.32 12.47 3.96 5.54 0.84 3.56
.728 .585 .250 .281 .033 .140 31396 2-31396-2
22–16 18.49 14.86 6.35 7.14 0.84 3.56
509–3,260 .775 .616 .281 .312 .033 .125 30996 2-30996-1
[0.26–1.65] 19.69 15.65 7.14 7.92 0.84 3.18
.775 .616 .281 .312 .033 .140 31160 2-31160-1
819.69 15.65 7.14 7.92 0.84 3.56
M4 .728 .585 .250 .281 .033 .125 31270 2-31270-1
18.49 14.86 6.35 7.14 0.84 3.18
.728 .585 .250 .281 .033 .140 31397 2-31397-1
18.49 14.86 6.35 7.14 0.84 3.56
.775 .616 .281 .312 .033 .125 30997 2-30997-1
19.69 15.65 7.14 7.92 0.84 3.18
10 .775 .616 .281 .312 .033 .140 31161 2-31161-1
19.69 15.65 7.14 7.92 0.84 3.56
.728 .585 .250 .281 .033 .140 31398 2-31398-1
18.49 14.86 6.35 7.14 0.84 3.56
1.009 .772 .437 .469 .033 .140 31176 2-31176-1
1/4 25.63 19.61 11.10 11.91 0.84 3.56
M6 1.009 .772 .437 .469 .033 .125 31251 2-31251-1
25.63 19.61 11.10 11.91 0.84 3.18
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
1Slightly unusual tongue shape.
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
39
Ring Tongue Terminals (Continued)
Wire Size Dimensions Material Wire Part Numbers
Circular Mils Stud L E C WThickness Insulation Loose Tape
[mm2]Size Max. Max. Min. Max. Dia. Max. Piece Mounted
.634 .506 .171 .250 .033 .150 32187 —
416.10 12.85 4.34 6.35 0.84 3.81
.634 .506 .171 .250 .033 .170 32189 —
16.10 12.85 4.34 6.35 0.84 4.32
.790 .616 .281 .343 .033 .170 30926 —
20.07 15.65 7.14 8.71 0.84 4.32
6.634 .506 .171 .250 .033 .150 32188 —
M3.5 16.10 12.85 4.34 6.35 0.84 3.81
16–14 .634 .506 .171 .250 .033 .170 32190 2-32190-1
2,050–5,180 16.10 12.85 4.34 6.35 0.84 4.32
[1.04–2.62] 8.790 .616 .281 .343 .033 .170 30927 2-30927-1
M4 20.07 15.65 7.14 8.71 0.84 4.32
.790 .616 .281 .343 .033 .170 30928 2-30928-1
10 20.07 15.65 7.14 8.71 0.84 4.32
.790 .616 .281 .343 .033 .150 30993 2-30993-1
20.07 15.65 7.14 8.71 0.84 3.81
1/4 1.009 .772 .437 .469 .033 .150 31256 —
M6 25.63 19.61 11.10 11.91 0.84 3.81
5/16 1.009 .772 .437 .469 .033 .170 31169 2-31169-1
M8 25.63 19.61 11.10 11.91 0.84 4.32
10 .970 .796 .281 .343 .050 .230 33722 2-33722-1
24.64 20.22 7.14 8.71 1.27 5.84
16–14HD11.220 .952 .437 .531 .050 .230 33639 —
2,050–5,180 1/4 30.99 24.18 11.10 13.49 1.27 5.84
[1.04–2.62] M6 1.282 1.014 .437 .531 .050 .300 322296 —
32.56 25.76 11.10 13.49 1.27 7.62
1.007 .817 .302 .375 .042 .230 31825 —
25.58 20.75 7.67 9.53 1.07 5.84
6.877 .734 .219 .281 .042 .230 321501 2-321501-1
M3.5 22.28 18.64 5.56 7.14 1.07 5.84
.976 .817 .302 .312 .042 .230 326889 —
24.79 20.75 7.67 7.92 1.07 5.84
12–10 8.955 .796 .281 .312 .042 .230 324523 —
5,180–13,100 M4 24.26 20.22 7.14 7.92 1.07 5.84
[2.62–6.64] 10 1.007 .817 .302 .375 .042 .230 31771 2-31771-1
25.58 20.75 7.67 9.53 1.07 5.84
1/4 1.251 .983 .468 .531 .042 .230 31772 2-31772-1
M6 31.78 24.97 11.89 13.49 1.07 5.84
3/8 1.345 1.046 .531 .593 .042 .230 31828 —
34.16 26.57 13.49 15.06 1.07 5.84
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
1Heavy Duty for extra mechanical strength.
Wire Size Range
AWG 16 to 10,
CMA 2,050 to 13,100
[1.04 to 6.64 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
40
Knife Disconnect Splices
Wire Size Range
AWG 22 to 10,
CMA 509 to 13,100
[0.26 to 6.64 mm2]
Material
Splice Body and Sleeve— Copper
per ASTM B-152
Plating — Tin per MIL-T-10727
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Wire Size Dimensions Wire Part Numbers
Circular Mils LWInsulation Loose Tape
[mm2]Max. Dia. Max. Piece Mounted
22–16 .794 .203 .125 31770 —
509–3,260 20.17 5.16 3.18
[0.26–1.65] .794 .203 .140 31777 2-31777-1
20.17 5.16 3.56
16–14 .794 .203 .150 31943 —
2,050–5,180 20.17 5.16 3.81
[1.04–2.62] .794 .203 .170 31944 —
20.17 5.16 4.32
12–10 1.176 .281 .230
5,180–13,100 29.87 7.14 5.84 31942 2-31942-1
[2.62–6.64]
Wire Size Dimensions Material Wire Part Numbers
Circular Mils Stud L E C WThickness Insulation Loose Tape
[mm2]Size Max. Max. Min. Max. Dia. Max. Piece Mounted
26–22 6.658 .551 .281 .250 .020 .082
202–810 M3.5 16.71 14.00 7.14 6.35 0.51 2.08 322210 —
[0.1–0.41]
22–16 6.710 .585 .250 .281 .033 .125 34101 —
509–3,260 M3.5 18.03 14.86 6.35 7.14 0.84 3.18
[0.26–1.65] 8.701 .585 .250 .281 .033 .140 321543 —
M4 17.81 14.86 6.35 7.14 0.84 3.56
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Slotted Ring Tongue Terminals
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
41
Rectangular Tongue Terminals
Wire Size Range
AWG 22 to 16,
CMA 509 to 3,260
[0.26 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Wire Size Dimensions Material Wire Part Numbers
Circular Mils Stud L E C WThickness Insulation Loose Tape
[mm2]Size Max. Max. Min. Max. Dia. Max. Piece Mounted
22–16 5.786 .633 .277 .277 .033 .140
509–3,260 M3 19.96 16.08 7.04 7.04 0.84 3.56 328500 —
[0.26–1.65]
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Flanged Spade Tongue Terminals
Wire Size Range
AWG 26 to 14,
CMA 202 to 5,180
[0.1 to 2.62 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Wire Size Dimensions Material Wire Part Numbers
Circular Mils Stud L E C W X H Thickness Insulation Loose Tape
[mm2]Size Max. Max. Min. Max. Dia. Max. Piece Mounted
26–22 2.588 .473 .203 .182 .110 .031 .020 .082
202–810 M2 14.94 12.01 5.16 4.62 2.79 0.79 0.51 2.08 324598 2-324598-1
[0.1–0.41]
22–16 6.668 .538 .203 .296 .125 .046 .033 .125 32419 22-32419-1
509–3,260 M3.5 16.97 13.67 5.16 7.52 3.18 1.17 0.84 3.18
[0.26–1.65] 8.761 .585 .250 .416 .171 .062 .033 .125 32495 —
M4 19.33 14.86 6.35 10.57 4.34 1.57 0.84 3.18
16–14 8.685 .555 .203 .294 .125 .052 .033 .170
2,050–5,180 M4 17.40 14.10 5.16 7.47 3.18 1.32 0.84 4.32 320859 —
[1.04–2.62]
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
42
Spade Tongue Terminals
Wire Size Range
AWG 26 to 16,
CMA 202 to 3,260
[0.1 to 1.65 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating —Tin per MIL-T-10727
Wire Size Dimensions Material Wire Part Numbers
Circular Mils Stud L E C W X Thickness Insulation Loose Tape
[mm2]Size Max. Max. Min. Max. Dia. Max. Piece Mounted
26–22 0.415 .348 .078 .125 .062 .020 .082 32502 —
202–810 10.54 8.84 1.98 3.18 1.57 0.51 2.08
[0.1–0.41] 4.558 .481 .211 .203 .072 .020 .082 34248 —
14.17 12.22 5.36 5.16 1.83 0.51 2.08
6.684 .538 .203 .297 .141 .033 .125 33766 —
M3.5 17.37 13.67 5.16 7.54 3.58 0.84 3.18
22–16 6.684 .538 .203 .297 .141 .033 .140 33799 —
509–3,260 M3.5 17.37 13.67 5.16 7.54 3.58 0.84 3.56
[0.26–1.65] 10 .807 .631 .296 .343 .171 .033 .125 320379 —
20.50 16.03 7.52 8.71 4.34 0.84 3.18
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
43
Rectangular Tongue Terminals
Wire Size Range
AWG 22 to 8,
CMA 509 to 20,800
[0.26 to 10.5 mm2]
Material
Splice Body and Sleeve— Copper
per ASTM B-152
Plating — Tin per MIL-T-10727
Wire Size Dimensions Part Numbers
Circular Mils LWLoose
[mm2]Max. Piece
22–16 .745 .203
509–3,260 18.92 5.16 31762
[0.26–1.65]
16–14 .750 .203
2,050–5,180 19.05 5.16 31763
[1.04–2.62]
12–10 .940 .281
5,180–13,100 23.88 7.14 31945
[2.62–6.64]
81.225 .390
13,100–20,800 31.12 9.91 32161
[6.64–10.5]
Knife Disconnect Splices
Wire Size Range
AWG 22 to 14,
CMA 509 to 5,180
[0.26 to 2.62 mm2]
Material
Terminal Body and Sleeve—
Copper per ASTM B-152
Plating — Tin per MIL-T-10727
Wire Size Dimensions Material Part Numbers
Circular Mils Stud Style L E C W X H Thickness Loose
[mm2]Size Max. Max. Min. Max. Piece
22–16 6.733 .541 .250 .250 .187 .047 .033
509–3,260 M3.5 B18.62 13.74 6.35 6.35 4.75 1.19 0.84 320671
[0.26–1.65]
16–14 8.647 .484 .219 .344 .156 .094 .033
2,050–5,180 M4 A16.43 12.29 5.56 8.74 3.96 2.39 0.84 31674
[1.04–2.62]
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Style A
with Side Flange Style B
with Bossed Hole
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
44
SOLISTRAND Military Approved Terminals
Cross Reference Military to AMP Part Number
Class 1 and Class 2
Military Approvals
Military Specification
M7928/7
Wire Size Range
AWG 22 to 14
Note: Part numbers are shown as loose piece over tape mounted product.
Military SOLISTRAND Approved
Specification Approval Wire Range
MS 20659 Class 1 & 2 12-10
MS 20659 Class 2 Only 8-4/0
M7928/7 Class 2 Only* 22-14
SOLISTRAND Class 1 and Class 2 military approved terminals meet the
performance requirements outlined in specification Mil-T-7928G.
*320093 also class 1 approved.
Approval Dimensional Application Use Performance
Requirement Tooling Requirement
Terminals must comply Hand application tool For procurement
with the dimensional which must conform to by government
Class 1 requirements specified the military’s dimensional agencies for
by the military. and performance maintenance and
specification. repair.
Dimensional The terminal For procurement Per Military
requirements are manufacturers by contractors Specification
maintained by the recommended and Mil-T-7928G
terminal manufacturers. application tooling. manufacurers
Class 2 For field repair Note: Several tape for high volume
purposes Class 2 mounted SOLISTRAND production,
terminals must be capable part numbers are modification,
of being replaced by currently Class 2 and repair.
Class 1 Terminals approved.
Note: Where class 2 approval exists all similar (form, fit and function) parts in that product line are approved.
M7928/7 SOLISTRAND Stud
AWG Dash Part Class Size
Numbers Numbers
134103 2 2
2-34103-1
234104 2 4
2-34104-6
334110 2 6
22-18 2-34110-3
434112 2 10
2-34112-2
534114 2 5/6
2-34114-2
634115 2 3/8
2-34115-2
7321684 2 6
2-321684-1
8320093 1 & 2 10
2-320093-1
16-14 9 34125 2 5/16
2-34125-6
10 34126 2 3/8
2-34126-2
11 34119 2 4
2-34119-1
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
45
Cross Reference Military to AMP Part Number
Military Specification
MS 20659
Wire Size Range
AWG 12 to 4/0
MS20659 SOLISTRAND Stud
AWG Dash Part Class Size
Numbers Numbers
105 33457 1&2 10
12-10 2-33457-2 2
106 33459 1&2 5/16
2-33459-6 2
8107 31807 2 10
2-31807-2
108 31808 2 5/16
6109 321598 2 1/4
110 33467 2 3/8
4111 31811 2 1/4
112 31812 2 3/8
2113 320383 2 1/4
114 321600 2 3/8
1/0 117 321866 2 1/4
118 321868 2 3/8
2/0 119 321870 2 5/16
120 321871 2 3/8
3/0 121 321875 2 3/8
122 321877 2 1/2
4/0 123 321878 2 3/8
124 321880 2 1/2
12-10 128 33220 1&2 3/8
8 129 33463 2 3/8
130 321298 2 10
6131 33466
2-33466-3 2 5/16
4 132 33115 2 5/16
1/0 135 36919 2 1/2
2/0 136 321873 2 1/2
4/0 137 321625 2 7/8
140 324061 2 8
8141 33461
2-33461-2 2 1/4
6 143 320344 2 1/2
4144 33114 2 10
145 327175 2 1/2
2146 330301 2 10
147 322870 2 5/16
148 320741 2 7/16
1/0 151 321867 2 5/16
152 36918 2 7/16
2/0 153 321869 2 1/4
154 321872 2 7/16
3/0 155 321874 2 5/16
156 321876 2 7/16
157 321271 2 5/16
4/0 158 321879 2 7/16
159 36935 2 5/8
160 322228 2 3/4
12-10 165 35476 2 6
2-35476-1
166 35135 2 1/2
N o t e : Part numbers are shown as loose piece over tape mounted product.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
46
Description of MIL-T-7928G Test Procedures and Requirements for Te r m i n a l s
Test Test Test Test
Group Sequence Type Description
Samples subjected to 50 cycles, each cyle consisting of
A Current Cycling 30 minutes at 125% of the current listed on page 48
1followed by 15 minutes with no load.
B Voltage Drop See test method and requirements on page 48.
A Vibration See test method on page 46.
2 B Voltage Drop See test method and requirements on page 48.
C Tensile See test method and requirements on page 47.
Samples subjected to a salt spray/fog for 48 hours.
A Salt Spray/Corrosion Salt concentration to be 5%, temperature to be 35° C
3(95°) F, relative humidity to be 95-98%.
B Voltage Drop See test method and requirements on page 48.
C Tensile See test method and requirements on page 47.
A Heat Age Samples subjected to 193° C for 120 hours then cooled
to 23° C within one hour.
Samples subjected to a salt spray/fog for 48 hours.
4 B Salt Spray/Corrosion Salt concentration to be 5%, temperature to be 35° C
(95°) F, relative humidity to be 95-98%.
C Voltage Drop See test method and requirements on page 48.
D Tensile See test method and requirements on page 47.
Wire Size “D” Dimension Duration of Test
#12 AWG and larger or terminals 12 inches 18 hours each on horizontal
with insulation support and vertical axis.
#14 AWG and smaller with 17 inches 2 hours each on horizontal
no insulation support and vertical axis.
Vibration to be a simple harmonic motion with an amplitude of 0.03 inches (0.06 total excursion). Frequency to vary
uniformly from 10–55 Hz and back to 10 Hz. Frequency to be traversed in approximately one minute.
Procedure for Vibration Testing of Terminals per MIL-T-7928G
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
47
Military Tensile Test Results
Tensile after
Vibration Tensile after
Salt Spray MIL-T-7928
Requirement
250
200
150
100
50
0
22 18 16 14 12 10
Tensile (lbs.)
Wire Size
SOLISTRAND Tensile Test Results
Wire Sizes 22 – 10
8 6 4 2
Tensile (lbs.)
Wire Size
SOLISTRAND Tensile Test Results
Wire Sizes 8 – 2
1500
1000
500
0
1/0 2/0 3/0 4/0
Tensile (lbs.)
Wire Size
SOLISTRAND Tensile Test Results
Wire Sizes 1/0 – 4/0
3500
3000
2500
2000
1500
1000
500
0
Tensile Requirements
Per MIL-T-7928G
Wire Size Minimum Tensile
AWG Strength (Lbs)
22 15
20 19
18 38
16 50
14 70
12 110
10 150
8 225
6 300
4 400
2 550
1/0 700
2/0 750
3/0 825
4/0 875
Note: 1. Samples tensile tested to
destruction at a rate of one inch/
minute using military approved wire.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
48
Illustration of Millivolt Drop Measurement Procedure
Military Specification
MIL-T-7928G
Maximum Crimp MVD =
Wire Size Test EWL Measurement + Valve
Current Listed Below
AWG (Amperes) Initial Final
Terminal Terminal
22 9
20 11
18 16
16 22
14 32
12 41 1 3
10 55
8 73
6 101
4 135
2 181
1/0 245
2/0 283 2 4
3/0 328
4/0 380
Max. Allowable MVD
MVD of Equal Wire
Length
After Current Cycling
After Vibration
After Corrosion
MVD
Wire Size
10
8
6
4
2
0
22 18 16 14 12 10 8 6 4 2 1/0 2/0 3/0 4/0
SOLISTRAND
Millivolt Drop Results
Per MIL-T-7928G
Using Military
Approved Wire
Military Millivolt Drop Test Results
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
49
Description of UL 486A Test Procedures and Requirements for Terminals
Requirement:
Connector temperatures must not exceed the ambi-
ent temperature plus 50°C [90°F] after stability is
attained.
Stability:
A test sample is considered to have attained a stable
temperature when three readings taken at not less
than 10 minute intervals show no more than a 2°C
[3.6°F] variation between any two readings.
Wire Size Range
AWG 22 to 600 MCM
Test Sequences
Test Group 1
Mechanical Sequence
1. Secureness
2. Pullout
Test Group 2
Mechanical Sequence
1. Secureness
2. Static Heat
3. Pullout
Wire Size Pullout
AWG Force (lbs.)
22 8
20 13
18 20
16 30
14 50
12 70
10 80
8 90
6 100
4 140
2 180
1/0 250
2/0 300
3/0 350
4/0 450
250 500
300 550
350 600
400 650
500 800
600 900
Note: Testing conducted on non-plated
copper wire with UL approved insulation.
Wire Size Test Current
AWG (Amperes)
22 9
20 12
18 17
16 18
14 30
12 35
10 50
8 70
6 95
4 125
2 170
1/0 230
2/0 265
3/0 310
4/0 360
250 405
300 445
350 505
400 545
500 620
600 690
Secureness Test Requirements
Static Heat Test RequirementsPullout Test Requirements
Wire Size Bushing Height Weight
AWG Dia. (lbs.)
18-16 1/4 10 1/4 2
14 3/8 11 3
12-10 3/8 11 5
8 3/8 11 8
6 1/2 11 3/4 18
4 1/2 11 3/4 30
2 9/16 12 1/2 30
1/0 5/8 13 1/2 50
2/0 3/4 14 1/2 50
3/0 3/4 14 1/2 60
4/0 3/4 14 1/2 60
250 7/8 16 60
300 7/8 16 80
350-400 1 17 80
500-600 1 1/8 18 1/4 100
Note: Test Duration = 30 Minutes
Terminal must not be separate from wire when
subjected to the listed load for one minute.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
50
Wire Size Bushing Height Weight
AWG Dia. (lbs.)
18-16 1/4 10 1/4 2
14 3/8 11 3
12-10 3/8 11 5
8 3/8 11 8
6 1/2 11 3/4 18
4 1/2 11 3/4 30
Note: Test Duration=30 Minutes
Description of UL 486A & C Test Procedures and Requirements
for Butt and Parallel Type Splices
UL 486 C Wire Size
AWG 22 to 6
UL 486 A Wire Size
AWG 4 to 600 MCM
Test Sequences
Test Group 1
Mechanical Sequence
1. Secureness
2. Pullout
Test Group 2
Mechanical Sequence
1. Secureness
2. Static Heat
3. Pullout
Secureness Test Requirements
Static Heat Test RequirementsPullout Test Requirements
Splices must not be separate from wire when
subjected to the listed load for one minute.
Requirement:
Connector temperatures must not exceed the ambi-
ent temperature plus 50°C [90°F] after stability is
attained.
Stability:
A test sample is considered to have attained a stable
temperature when three readings taken at not less
than 10 minute intervals show no more than a 2°C
[3.6°F] variation between any two readings.
Wire Size Pullout
AWG Force (lbs.)
22 8
20 10
18 10
16 15
14 25
12 35
10 40
8 45
6 50
4 140
2 180
1/0 250
2/0 300
3/0 350
4/0 450
250 500
300 550
350 600
400 650
500 800
600 900
Note: Testing conducted on non-plated
copper wire with UL approved insulation.
Wire Size Test Current
AWG (Amperes)
22 9
20 12
18 17
16 18
14 30
12 35
10 50
8 70
6 95
4 125
2 170
1/0 230
2/0 265
3/0 310
4/0 360
250 405
300 445
350 505
400 545
500 620
600 690
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
51
Application Tooling Information for SOLISTRAND, Budget and
DIAMOND GRIP Products
Wire Size Range
AWG 26 to 6
Pneumatic Tooling Tooling For
Tape Mounted Products
Dies for 6-26, Tool Dies for
Crimping 189721-1 Requires 69875
AMP Heads Straight Action AMP-TAPETRONIC
Product Wire Hand for Adapter 217200-1 AMP-O-LECTRIC6
Type Size Tools 6-26, or 318161-1 Requires
Tool Dies Also Fit Applicator
189721-1 69710-1
Hand Tool AMPOMATOR CLS IV
Single Multiple Requires
Wire Range Wire Range Applicators
26-22 693632— — — —
All 24-20
SOLISTRAND 22-16 314516-1 679301-1 47812 *68240-1
terminals and 16-14 499352314517-1 679301-1 47813 *68241-1
splices except 12-10 & 58546-13— 679301-1 478141*68242-1
for Flag Tongue 16-14 HD
terminals 14-12 495922314518-1 — — *90566-1
8 — 679302-1 — — *68243-1
6 — 679303-1 — — —
Flag Tongue 16-14 499752217204-1 Flag terminals not
terminals only 12-10 499652217203-1 — — available in tape
mounted form
26-22 693632—
Budget 22-16 58508-14*68259-1
terminals and — — —
splices 16-14 58508-14*68094-1
12-10 & 49656, 58508-14
16-14 HD *68260-1
26-22 48070*— — — *69902-1
DIAMOND 24-20 —*— — — —
GRIP 22-16 49512*— — — *69903-1
terminals 16-14 49513*— — 46251-2*69904-1
and splices 12-10 & 59054*— — — *—-1
16-14 HD
26-22 —*— — — —
Standard 22-16 48364*— — — —
“B” 16-14 —*— — — —
terminals 12-10 49736*— — — —
8 49737*— — — —
1For standard wire only.
2CERTI-CRIMPHand Tool.
3Contains die set 58545-1. PRO-CRIMPER II commercial tool not approved for UL applications.
4Contains die set 58509-1. PRO-CRIMPER II commercial tool not approved for UL applications. Not approved for use with Budget Spring Spade terminals.
5With locator, for terminals only.
6Call Tooling Assistance Center for Machine & Applicator part numbers.
Chart lists common AMP Application Tooling. For additional information call the Tooling Assistance Center 1-800-722-1111.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
52
Application Tooling Information for SOLISTRAND Terminals and Splices
Wire Size Range
AWG 8 to 600 MCM
1CERTI-CRIMPHand Tool.
2These crimping heads are recommended for use only with AMP Hydraulic Hand Pump 314979-1, DYNA-CRIMPHydraulic Power Units 69120-1
(115 VAC) and 69120-2 (230 VAC), and with DYNA-CRIMP II Battery Operated Hydraulic Power Unit 122271-1. See pages 55 & 56.
Chart lists common AMP Application Tooling. For additional information call the Tooling Assistance Center 1-800-722-1111.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
53
Application Tooling
Loose Form Terminal
and Splice Tooling CERTI-CRIMP Hand Tools
Pneumatic Tools
Double Action
Hand Tool
“C” Head Straight
Action Hand Tool
Part No. 69710–1
Heavy Head Hand Tool
Part No. 69355
Part No. 59973-1
(Dies Required)
Part No. 59975-1
(Self Contained Dies)
Hydraulic Hand Tools
Part No. 69015
PRO-CRIMPER II
Hand Tool
Part No. 58546-1 SOLISTRAND
58508-1 Budget
For additional tooling information, call 1-800-722-1111.
6-26 Pneumatic Tool
Part No. 189721-1
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
54
Application Tooling (Continued)
Tape Mounted
AMP-TAPETRONIC Machine
69875, 68250-1
(Requires Dies) AMP-O-LECTRIC, Model “G” Machine
(Requires Applicator and Dies)
AMPOMATOR CLS IV Machine 217500-1
(Requires Applicators and Dies) Entry Level Terminator
(Requires Applicators and Dies)
For additional tooling information, call 1-800-722-1111.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
55
Application Tooling (Continued)
Part No.
58445-1
Latch Heads and Dies
Part No.
69099
Part No.
69082
Part No.
69065
Part No. 69069
(Self Contained Dies)
Part No.
69067
For additional tooling information, call 1-800-722-1111.
Part No.
69097
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
56
Application Tooling (Continued)
AMP application tools are designed to
produce a carefully controlled uniform
pressure crimp, regardless of how they
are powered. All tools shown are
specially designed for AMP products
and are precision machined from hard
tool steel.
Hand Operated Power Unit
314979-12(Hose, head and dies not included)
Refer to the table below for accessories.
Part No. 122271-14Power Unit Only
(Includes Pressure Release)
115 Volts (60 Hz)— 69120-13
230 Volts (60 Hz)— 69120-23
DYNA-CRIMP Electric
Hydraulic Power Unit
DYNA-CRIMP II
Battery Operated
Hydraulic Power Unit
Power Units Accessories
For Use With Accessory Description Accessory Remarks
Power Unit No. Part No.
7' Handle Control Assembly—Hose & Cord 59907-7
15' Handle Control Assembly—Hose & Cord 1-59907-5
21' Handle Control Assembly—Hose & Cord 2-59907-1
28' Handle Control Assembly—Hose & Cord 2-59907-8
369120-1315' Foot Switch Assembly 68284-1 Need Hose Assembly
369120-233' Hose Assembly 59909-3 68284-1 Foot Switch
314979-127' Hose Assembly 59909-7 Assembly needed with
122271-1415' Hose Assembly 1-59909-5 these Hose Assemblies
21' Hose Assembly 2-59909-1 and 69120
2' Hose Assembly (1/4” I.D.) 314990-1 More Flexible, Lighter Weight.
3' Hose Assembly (1/4” I.D.) 314990-2 Recommended for use with
7' Hose Assembly (1/4” I.D.) 314990-3 DYNA-CRIMP II Battery
15' Hose Assembly (1/4” I.D.) 314990-4 Operated Hydraulic Power Un i t
69120-133-Way Multi-Directional Value 592201For use with
69120-233-Way Multi-Directional Value (Elec.Ctl) 59220-21Foot Switch only
1Contact AMP Incorporated for usage recommendations.
2Also see AMP Customer Manual 409-5860.
3Also see AMP Customer Manual 409-1950.
4Also see AMP Customer Manual 409-5869.
Note: All Hoses and Handle Control Assemblies have a 3⁄8" high flow male coupler (311470-1) on each end.
All Power Units and Heads have a 3⁄8" high flow female coupler (311471-1).
For additional tooling information, call 1-800-722-1111.
Typical interchangable hose,
head and dies not included
Handle
Control Hose
Assembly Foot
Control Multidirectional
Valve
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Part Number Index
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
57
3 1 4 9 9 1 4
3 1 5 1 6 3 8
3 1 5 1 8 3 8
3 1 5 8 7 2 6
3 1 5 8 8 2 6
3 1 5 8 9 2 6
3 1 6 2 8 3 2
3 1 6 3 4 2 6
3 1 6 3 5 2 6
3 1 6 3 6 2 6
3 1 6 7 4 4 3
3 1 6 7 9 3 8
3 1 6 8 1 3 8
3 1 6 9 1 2 4
3 1 7 0 4 2 6
3 1 7 0 5 2 6
3 1 7 0 6 2 6
3 1 7 6 2 4 3
3 1 7 6 3 4 3
3 1 7 7 0 4 0
3 1 7 7 1 3 9
3 1 7 7 2 3 9
3 1 7 7 7 4 0
3 1 8 0 5 1 4
3 1 8 0 7 1 5
3 1 8 0 8 1 5
3 1 8 1 1 1 6
3 1 8 1 2 16, 21
3 1 8 1 3 2 4
3 1 8 1 8 3 6
3 1 8 1 9 3 6
3 1 8 2 1 2 4
3 1 8 2 5 3 9
3 1 8 2 8 3 9
3 1 9 4 2 4 0
3 1 9 4 3 4 0
3 1 9 4 4 4 0
3 1 9 4 5 4 3
3 2 1 5 1 3 6
3 2 1 6 1 4 3
3 2 1 8 5 1 3
3 2 1 8 6 1 3
3 2 1 8 7 3 9
3 2 1 8 8 3 9
3 2 1 8 9 3 9
3 2 1 9 0 3 9
3 2 4 1 6 3 0
3 2 4 1 8 3 0
3 2 4 1 9 4 1
3 2 4 6 3 3 6
3 2 4 6 4 3 6
3 2 4 9 4 3 0
3 2 4 9 5 4 1
3 2 5 0 1 2 6
3 2 5 0 2 4 2
3 2 5 0 3 3 2
3 2 5 7 9 2 4
3 2 8 2 2 1 2
3 2 8 2 3 1 2
3 2 8 2 4 1 3
3 2 8 5 8 1 2
3 2 8 5 9 1 2
Part No. Page
3 0 6 9 1 1 2
3 0 6 9 2 1 2
3 0 6 9 3 1 3
3 0 6 9 4 1 3
3 0 6 9 5 1 3
3 0 6 9 6 1 3
3 0 6 9 7 1 3
3 0 9 2 6 3 9
3 0 9 2 7 3 9
3 0 9 2 8 3 9
3 0 9 5 3 3 6
3 0 9 7 2 1 5
3 0 9 9 3 3 9
3 0 9 9 5 3 8
3 0 9 9 6 3 8
3 0 9 9 7 3 8
3 1 0 4 9 1 3
3 1 0 8 7 1 2
3 1 0 8 8 1 2
3 1 0 8 9 1 2
3 1 0 9 0 1 2
3 1 0 9 1 1 2
3 1 0 9 4 3 8
3 1 0 9 6 3 8
3 1 1 0 1 1 2
3 1 1 1 2 1 4
3 1 1 1 3 1 4
3 1 1 1 4 1 4
3 1 1 2 0 1 4
3 1 1 2 2 1 4
3 1 1 2 3 1 4
3 1 1 5 9 3 8
3 1 1 6 0 3 8
3 1 1 6 1 3 8
3 1 1 6 3 1 3
3 1 1 6 4 1 4
3 1 1 6 5 1 4
3 1 1 6 9 3 9
3 1 1 7 2 1 3
3 1 1 7 3 1 3
3 1 1 7 6 3 8
3 1 2 5 1 3 8
3 1 2 5 6 3 9
3 1 2 6 4 1 2
3 1 2 6 5 1 2
3 1 2 6 6 1 3
3 1 2 6 9 3 8
3 1 2 7 0 3 8
3 1 3 9 3 3 8
3 1 3 9 6 3 8
3 1 3 9 7 3 8
3 1 3 9 8 3 8
3 1 4 2 3 1 2
3 1 4 2 5 1 2
3 1 4 2 8 1 2
3 1 4 3 0 1 2
3 1 4 4 2 2 6
3 1 4 9 8 1 3
Part No. Page
3 2 8 6 0 1 2
3 2 8 6 1 3 8
3 2 8 6 2 3 8
3 2 8 8 2 1 4
3 2 9 9 4 1 4
3 2 9 9 5 2 6
3 2 9 9 6 1 5
3 3 1 1 4 1 6
3 3 1 1 5 16, 21
3 3 1 9 5 2 2
3 3 2 0 2 2 6
3 3 2 1 9 2 6
3 3 2 2 0 1 5
3 3 2 2 1 2 6
3 3 4 2 6 2 5
3 3 4 3 7 3 2
3 3 4 5 6 1 4
3 3 4 5 7 1 4
3 3 4 5 8 1 4
3 3 4 5 9 1 4
3 3 4 6 0 1 5
3 3 4 6 1 1 5
3 3 4 6 2 1 5
3 3 4 6 3 1 5
3 3 4 6 4 1 6
3 3 4 6 5 1 6
3 3 4 6 6 16, 21
3 3 4 6 7 1 6
3 3 4 6 8 1 6
3 3 4 6 9 1 6
3 3 4 7 0 1 6
3 3 4 7 1 1 6
3 3 4 7 9 2 6
3 3 6 3 9 3 9
3 3 6 4 6 2 2
3 3 6 4 7 2 2
3 3 6 4 8 2 2
3 3 6 9 5 1 2
3 3 7 1 6 2 2
3 3 7 1 7 2 2
3 3 7 1 8 2 2
3 3 7 2 2 3 9
3 3 7 2 8 2 2
3 3 7 2 9 2 2
3 3 7 6 5 2 6
3 3 7 6 6 4 2
3 3 7 9 9 4 2
3 4 1 0 1 4 0
3 4 1 0 3 1 2
3 4 1 0 4 1 2
3 4 1 0 5 1 2
3 4 1 0 7 1 2
3 4 1 0 8 1 2
3 4 1 0 9 1 3
3 4 1 1 0 1 2
3 4 1 1 1 1 2
3 4 1 1 2 1 3
3 4 1 1 3 1 3
3 4 1 1 4 1 3
3 4 1 1 5 1 3
3 4 1 1 7 2 6
3 4 1 1 8 2 6
Part No. Page 3 4 1 1 9 1 3
3 4 1 2 0 1 3
3 4 1 2 1 1 3
3 4 1 2 2 1 3
3 4 1 2 3 1 3
3 4 1 2 4 1 4
3 4 1 2 5 1 4
3 4 1 2 6 1 4
3 4 1 2 8 2 6
3 4 1 2 9 2 6
3 4 1 3 0 3 5
3 4 1 3 7 3 5
3 4 1 3 8 3 5
3 4 1 9 4 1 2
3 4 2 2 6 3 6
3 4 2 2 7 3 6
3 4 2 2 8 3 6
3 4 2 4 7 2 6
3 4 2 4 8 4 2
3 4 2 6 1 3 2
3 4 2 6 6 2 4
3 4 3 1 8 3 5
3 4 3 1 9 3 5
3 4 3 2 0 3 5
3 4 3 2 1 3 6
3 4 3 2 2 3 6
3 4 3 2 3 3 6
3 4 3 8 4 2 6
3 4 4 0 4 1 4
3 4 4 5 9 2 4
3 4 4 8 4 1 4
3 4 4 8 6 1 4
3 4 4 8 7 1 4
3 4 5 1 8 2 6
3 4 5 2 0 3 1
3 4 5 2 5 2 4
3 4 5 6 7 2 2
3 4 5 8 2 2 6
3 4 5 8 3 2 6
3 4 8 2 9 2 2
3 4 8 3 0 2 2
3 4 8 3 3 1 5
3 4 8 3 4 1 5
3 4 8 9 1 1 4
3 4 8 9 2 1 4
3 4 8 9 6 1 3
3 4 9 6 4 1 4
3 4 9 6 5 1 4
3 4 9 6 6 1 4
3 4 9 6 7 2 2
3 4 9 6 8 2 2
3 4 9 6 9 2 2
3 5 1 1 6 2 6
3 5 1 3 5 1 5
3 5 1 8 3 1 7
3 5 1 8 4 1 7
3 5 1 8 5 1 7
3 5 1 8 7 3 5
3 5 1 8 9 3 6
3 5 2 1 2 3 2
3 5 2 4 7 1 5
3 5 2 7 7 2 1
Part No. Page
N o t e : This numerical index lists all cata-
loged parts by base no. only. Complete
part nos. (with prefixes and/or suffixes)
are shown on the page(s) indicated.
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Part Number Index (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
58
3 6 9 5 8 3 7
3 6 9 5 9 3 7
3 6 9 6 0 3 7
5 0 3 3 4 1 2
5 0 9 8 1 1 4
5 0 9 8 2 1 4
5 1 8 7 2 1 3
5 1 8 7 5 3 0
5 2 1 9 7 1 6
5 2 2 6 9 1 5
5 2 5 1 2 3 0
5 2 7 0 0 2 9
5 2 7 0 1 2 9
5 2 7 0 2 2 9
5 2 7 0 3 2 9
5 2 7 0 4 2 9
5 2 7 0 5 2 9
5 2 7 0 6 2 9
5 2 7 0 7 2 9
5 2 7 0 8 2 9
5 2 7 0 9 2 9
5 2 7 1 0 2 9
5 2 7 1 2 2 9
5 2 7 1 3 2 9
5 2 7 1 4 2 9
5 2 7 1 5 2 9
5 2 7 1 6 2 9
5 2 7 1 7 2 9
5 2 7 3 0 3 0
5 2 7 3 3 2 9
5 2 7 3 4 2 9
5 2 7 3 5 2 9
5 2 7 7 2 2 9
5 3 0 0 0 2 7
5 3 0 0 1 2 7
5 3 0 0 2 2 7
5 3 0 0 3 2 7
5 3 0 0 4 2 7
5 3 0 0 5 2 7
5 3 0 0 6 2 7
5 3 0 0 7 2 7
5 3 0 0 9 2 8
5 3 0 1 0 2 8
5 3 0 1 1 2 8
5 3 0 1 2 2 8
5 3 0 1 3 2 8
5 3 0 1 4 2 8
5 3 0 1 5 2 8
5 3 0 1 6 2 8
5 3 0 3 2 2 8
5 3 0 3 3 2 9
5 3 0 4 7 2 9
5 3 1 0 6 1 6
5 3 1 1 1 2 9
5 3 1 2 0 2 7
5 3 1 2 1 2 7
5 3 1 2 3 2 8
5 3 1 2 4 2 8
5 3 1 2 5 2 8
5 3 1 2 6 2 8
5 3 1 2 7 2 8
5 3 1 2 8 2 8
Part No. Page
3 5 2 7 8 2 4
3 5 4 3 2 2 2
3 5 4 7 6 1 4
3 5 4 9 3 2 6
3 5 4 9 4 2 6
3 5 4 9 5 2 6
3 5 5 5 5 3 1
3 5 6 2 5 2 1
3 5 6 6 4 1 5
3 5 6 6 5 1 5
3 5 6 6 6 1 5
3 5 6 6 8 1 7
3 5 6 6 9 1 7
3 5 6 7 0 1 7
3 5 6 7 8 2 1
3 5 6 8 0 3 1
3 5 7 7 1 1 4
3 5 7 7 2 1 4
3 5 7 7 5 2 2
3 5 7 7 6 2 2
3 6 1 8 9 1 2
3 6 1 9 5 2 6
3 6 1 9 9 2 2
3 6 2 0 0 2 2
3 6 2 0 1 2 2
3 6 2 1 6 3 1
3 6 2 6 9 3 3
3 6 2 7 0 3 3
3 6 2 7 1 3 3
3 6 2 7 2 3 3
3 6 4 5 1 1 4
3 6 4 6 7 1 2
3 6 4 9 9 1 5
3 6 8 0 7 1 6
3 6 8 0 8 1 6
3 6 8 0 9 1 6
3 6 8 1 0 1 6
3 6 8 1 5 1 6
3 6 8 8 0 2 6
3 6 8 8 6 3 6
3 6 9 0 6 3 6
3 6 9 0 9 3 5
3 6 9 1 5 1 7
3 6 9 1 6 1 7
3 6 9 1 7 1 7
3 6 9 1 8 1 7
3 6 9 1 9 1 8
3 6 9 2 1 1 8
3 6 9 2 2 18, 21
3 6 9 2 3 1 8
3 6 9 2 5 1 8
3 6 9 2 7 1 8
3 6 9 2 9 19, 21
3 6 9 3 0 1 9
3 6 9 3 2 1 9
3 6 9 3 4 1 9
3 6 9 3 5 1 9
3 6 9 4 6 3 5
3 6 9 4 8 3 5
3 6 9 5 1 3 5
3 6 9 5 3 3 1
3 6 9 5 7 3 7
Part No. Page 5 3 1 5 0 2 7
5 3 1 7 5 2 7
5 3 1 7 7 2 8
5 3 2 2 6 2 8
5 3 2 3 5 2 7
5 3 2 6 6 2 7
5 3 2 6 7 2 7
5 3 2 6 8 2 7
5 3 2 7 0 2 8
5 3 2 7 1 2 8
5 3 2 7 3 2 8
5 3 2 7 4 2 8
5 3 5 5 5 2 6
5 3 8 3 0 2 7
5 3 8 3 1 2 7
5 3 8 3 2 2 7
5 3 8 3 3 2 8
5 3 8 3 4 2 8
5 3 8 3 5 2 8
5 3 8 3 6 2 8
5 5 8 1 2 3 1
5 5 9 9 1 1 5
1 8 4 1 4 7 3 3
1 8 4 2 6 9 2 1
3 2 0 0 9 3 1 3
3 2 0 1 3 8 1 7
3 2 0 2 3 8 3 6
3 2 0 2 6 6 1 8
3 2 0 3 4 4 1 6
3 2 0 3 7 9 4 2
3 2 0 3 8 3 1 7
3 2 0 6 7 1 4 3
3 2 0 6 7 7 1 2
3 2 0 6 7 8 3 8
3 2 0 7 4 1 1 7
3 2 0 7 4 3 1 7
3 2 0 7 4 4 1 8
3 2 0 7 4 5 1 6
3 2 0 7 4 8 1 8
3 2 0 7 4 9 3 0
3 2 0 7 5 4 1 7
3 2 0 7 5 5 1 7
3 2 0 7 5 8 2 2
3 2 0 7 5 9 2 2
3 2 0 7 6 0 1 5
3 2 0 7 6 1 1 5
3 2 0 7 6 2 1 5
3 2 0 7 6 3 1 5
3 2 0 7 6 4 1 5
3 2 0 7 6 5 1 5
3 2 0 8 1 4 2 4
3 2 0 8 1 5 2 4
3 2 0 8 1 8 2 4
3 2 0 8 1 9 2 4
3 2 0 8 2 0 2 4
3 2 0 8 2 2 2 5
3 2 0 8 2 3 2 5
3 2 0 8 5 2 3 0
3 2 0 8 5 3 3 0
3 2 0 8 5 4 3 0
3 2 0 8 5 5 3 0
3 2 0 8 5 6 3 0
Part No. Page 3 2 0 8 5 7 3 0
3 2 0 8 5 9 4 1
3 2 0 8 7 0 2 4
3 2 1 0 0 7 1 3
3 2 1 0 2 4 3 6
3 2 1 0 5 1 3 3
3 2 1 0 5 6 3 3
3 2 1 0 5 9 3 3
3 2 1 0 6 0 3 3
3 2 1 0 6 3 3 3
3 2 1 0 6 4 3 3
3 2 1 0 6 6 3 4
3 2 1 1 2 1 3 3
3 2 1 1 2 3 3 4
3 2 1 1 6 3 1 9
3 2 1 1 6 5 2 2
3 2 1 1 9 8 3 6
3 2 1 2 0 1 3 3
3 2 1 2 5 3 3 3
3 2 1 2 5 9 3 4
3 2 1 2 6 2 2 1
3 2 1 2 6 5 2 1
3 2 1 2 7 1 1 9
3 2 1 2 7 2 2 1
3 2 1 2 7 5 3 3
3 2 1 2 7 7 3 4
3 2 1 2 8 0 3 6
3 2 1 2 8 8 3 1
3 2 1 2 8 9 3 1
3 2 1 2 9 8 1 6
3 2 1 4 4 1 3 3
3 2 1 4 6 3 2 6
3 2 1 4 9 9 2 5
3 2 1 5 0 1 3 9
3 2 1 5 4 3 4 0
3 2 1 5 5 7 2 5
3 2 1 5 5 8 2 5
3 2 1 5 7 6 3 3
3 2 1 5 8 0 3 4
3 2 1 5 8 2 3 4
3 2 1 5 8 4 3 4
3 2 1 5 9 8 1 6
3 2 1 6 0 0 1 7
3 2 1 6 2 1 3 8
3 2 1 6 2 5 1 9
3 2 1 6 3 2 3 2
3 2 1 6 8 3 1 3
3 2 1 6 8 4 1 3
3 2 1 6 9 1 2 4
3 2 1 8 0 1 3 6
3 2 1 8 0 9 3 1
3 2 1 8 2 7 1 4
3 2 1 8 2 8 1 4
3 2 1 8 2 9 1 4
3 2 1 8 6 6 1 7
3 2 1 8 6 7 17, 21
3 2 1 8 6 8 1 7
3 2 1 8 6 9 1 8
3 2 1 8 7 0 1 8
3 2 1 8 7 1 1 8
3 2 1 8 7 2 1 8
3 2 1 8 7 3 1 8
Part No. Page
SOLISTRAND, Budget and DIAMOND GRIP
Uninsulated Terminals and Splices Catalog 65505
Revised 9-00
Part Number Index (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
59
3 2 2 4 0 8 2 4
3 2 2 4 1 8 1 2
3 2 2 4 2 8 2 0
3 2 2 4 4 1 3 2
3 2 2 4 4 3 3 2
3 2 2 4 4 5 3 2
3 2 2 4 4 7 1 4
3 2 2 4 5 1 2 6
3 2 2 4 5 4 1 4
3 2 2 4 5 5 1 4
3 2 2 4 5 9 3 6
3 2 2 5 1 4 3 1
3 2 2 7 0 4 1 6
3 2 2 7 2 5 3 0
3 2 2 7 2 7 3 3
3 2 2 7 6 3 2 0
3 2 2 7 6 4 2 0
3 2 2 7 6 8 2 1
3 2 2 7 7 1 1 2
3 2 2 7 7 2 2 0
3 2 2 7 7 3 2 0
3 2 2 7 7 6 3 0
3 2 2 8 1 9 3 3
3 2 2 8 2 1 2 1
3 2 2 8 3 2 2 2
3 2 2 8 3 3 2 2
3 2 2 8 7 0 17, 21
3 2 2 9 0 5 2 1
3 2 2 9 0 6 2 1
3 2 2 9 0 9 2 1
3 2 2 9 1 2 2 1
3 2 2 9 2 7 1 2
3 2 2 9 3 9 2 0
3 2 2 9 4 5 2 5
3 2 2 9 4 6 2 5
3 2 2 9 9 6 2 6
3 2 3 0 3 4 1 9
3 2 3 0 5 0 1 9
3 2 3 0 8 6 1 2
3 2 3 0 8 7 1 3
3 2 3 0 9 6 1 2
3 2 3 1 0 6 2 4
3 2 3 1 1 2 2 4
3 2 3 1 1 9 2 4
3 2 3 1 2 4 3 0
Part No. Page
3 2 1 8 7 4 18, 21
3 2 1 8 7 5 1 8
3 2 1 8 7 6 1 8
3 2 1 8 7 7 1 9
3 2 1 8 7 8 1 9
3 2 1 8 7 9 1 9
3 2 1 8 8 0 1 9
3 2 2 2 0 4 3 3
3 2 2 2 1 0 4 0
3 2 2 2 1 1 3 1
3 2 2 2 1 5 3 4
3 2 2 2 2 2 1 9
3 2 2 2 2 3 1 9
3 2 2 2 2 4 1 8
3 2 2 2 2 5 1 8
3 2 2 2 2 7 1 9
3 2 2 2 2 8 1 9
3 2 2 2 3 5 1 3
3 2 2 2 4 2 1 5
3 2 2 2 4 6 3 6
3 2 2 2 5 2 1 9
3 2 2 2 5 3 1 9
3 2 2 2 5 4 1 9
3 2 2 2 5 7 2 0
3 2 2 2 5 8 2 0
3 2 2 2 5 9 2 0
3 2 2 2 6 2 2 0
3 2 2 2 6 3 2 0
3 2 2 2 6 4 2 0
3 2 2 2 6 7 2 0
3 2 2 2 6 9 2 0
3 2 2 2 7 0 2 0
3 2 2 2 7 1 2 0
3 2 2 2 7 3 2 0
3 2 2 2 7 5 3 5
3 2 2 2 7 6 3 5
3 2 2 2 7 7 3 5
3 2 2 2 7 8 3 5
3 2 2 2 7 9 3 7
3 2 2 2 8 0 3 7
3 2 2 2 8 1 3 7
3 2 2 2 8 2 3 7
3 2 2 2 9 1 1 8
3 2 2 2 9 6 3 9
3 2 2 3 9 1 1 8
Part No. Page 3 2 3 1 2 7 2 6
3 2 3 1 2 9 3 1
3 2 3 1 3 5 3 2
3 2 3 1 3 6 3 0
3 2 3 1 4 0 1 9
3 2 3 1 4 3 3 0
3 2 3 1 4 4 3 0
3 2 3 1 9 6 3 3
3 2 3 2 2 2 2 0
3 2 3 2 9 1 1 7
3 2 3 8 2 3 2 6
3 2 3 8 3 2 3 1
3 2 3 8 3 4 2 6
3 2 3 8 3 5 3 1
3 2 3 8 3 7 3 1
3 2 3 8 3 8 3 1
3 2 3 8 6 8 1 8
3 2 4 0 0 1 3 6
3 2 4 0 2 3 2 1
3 2 4 0 3 5 2 1
3 2 4 0 6 1 1 5
3 2 4 1 0 5 2 0
3 2 4 1 2 4 1 3
3 2 4 2 0 2 2 0
3 2 4 2 0 9 3 2
3 2 4 5 2 1 2 6
3 2 4 5 2 3 3 9
3 2 4 5 7 8 3 0
3 2 4 5 7 9 3 0
3 2 4 5 9 8 4 1
3 2 4 5 9 9 3 0
3 2 4 6 0 4 3 0
3 2 4 6 0 5 3 0
3 2 4 8 9 3 3 6
3 2 4 8 9 8 3 6
3 2 4 9 1 0 1 4
3 2 4 9 1 1 1 4
3 2 4 9 5 5 1 3
3 2 5 0 6 9 3 3
3 2 5 1 9 5 2 6
3 2 5 1 9 6 2 6
3 2 6 8 5 0 1 2
3 2 6 8 5 4 1 3
3 2 6 8 8 9 3 9
3 2 7 0 2 5 3 6
Part No. Page 3 2 7 1 7 5 1 7
3 2 7 7 3 2 2 2
3 2 7 8 8 2 2 0
3 2 7 8 8 7 3 4
3 2 7 9 0 2 3 2
3 2 7 9 0 5 3 2
3 2 7 9 5 1 2 4
3 2 7 9 5 3 2 5
3 2 7 9 5 5 2 4
3 2 7 9 5 9 2 5
3 2 7 9 7 1 2 5
3 2 8 0 5 0 2 5
3 2 8 3 3 9 2 4
3 2 8 3 4 1 2 4
3 2 8 3 4 2 2 4
3 2 8 3 4 9 2 4
3 2 8 3 5 3 2 4
3 2 8 3 5 5 2 4
3 2 8 3 5 6 2 4
3 2 8 3 6 3 2 4
3 2 8 3 7 7 1 3
3 2 8 3 9 5 2 6
3 2 8 5 0 0 4 1
3 2 8 5 2 2 3 0
3 2 8 8 7 2 3 1
3 2 8 9 7 0 1 3
3 2 8 9 7 1 1 4
3 2 9 9 6 6 1 3
3 3 0 3 0 1 1 7
3 3 0 3 6 7 3 6
3 3 0 3 6 8 3 6
3 3 0 3 6 9 3 6
3 3 0 5 3 9 2 4
3 3 0 8 2 7 2 6
3 3 0 9 6 8 2 2
3 3 0 9 6 9 2 3
3 3 0 9 7 0 2 3
3 3 1 2 6 9 2 5
3 3 1 4 0 1 1 2
3 3 1 4 1 4 2 2
3 3 1 4 1 7 2 3
3 3 1 4 2 0 2 3
3 3 1 4 2 3 2 3
3 3 1 8 8 0 2 3
3 3 2 0 4 2 2 2
Part No. Page
6 5 5 0 5 - 5 M - L U G - D A S - 9 - 0 0 Tyco Electronics Corporation, Harrisburg, PA 17105
Printed in U.S.A. Technical Support Center Phone: 1-800-522-6752, fax: 717-986-3316; Internet; http://www.amp.com
Americas
Argentina – Buenos Aires
Phone: + 54-1-733-2000
Fax: + 54-1-717-0988
Brazil – Sao Paulo
Phone: + 55-11-861-1311
Fax: + 55-11-861-0397
Canada – Toronto
Phone: + 1-905-475-6222
Fax: + 1-905-474-5520
E u r o pe/Middle East/A f r i c a
Austria – Vienna
Inside: Phone: + 0222-277-97-0
Fax: + 0222-277-97-333
Outside: Phone: + 43-1-277-97-0
Fax: + 43-1-277-97-333
Belgium – Kessel - Lo
Phone: + 32-16-35-23-00
Fax: + 32-16-35-23-52
Bulgaria – Sofia
Phone: + 359-2-971-2152
Fax: + 359-2-971-2153
Czech Republic – Kurim
Phone: + 420-5-41-162-111
Fax: + 420-5-41-162-223
Denmark – Viby
Phone: + 45-86-295-055
Fax: + 45-86-295-133
Egypt – Cairo
Phone: + 202-417-76-47
Fax: + 202-419-23-34
Estonia – Haabneeme
Phone: + 372-6205-900
Fax: + 372-6205-980
Finland – Helsinki
Phone: + 358-9-512-34210
Fax: + 358-9-512-34250
France – Cergy - Pontoise
Phone: + 33-1-3420-8888
Fax: + 33-1-3420-8600
Chile – Santiago
Phone: + 56-2-739-1230
Fax: + 56-2-739-1227
Colombia – Bogota
Phone: + 57-1-231-9398
Fax: + 57-1-240-3769
Mexico – Mexico City
Phone: + 52-5-729-0400
Fax: + 52-5-361-8545
United States – Harrisburg, PA
Phone: + 1-717-564-0100
Fax: + 1-717-986-7575
Venezuela – Caracas
Phone: + 58-2-986-7774
Fax: + 58-2-986-9739
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Germany – Bensheim
Phone: + 49-6251-133-0
Fax: + 49-6251-133-600
Germany – Neunkirchen - HTS Div.
Phone: + 49-2247-305-0
Fax: + 49-2247-305-122
Great Britain – London
Phone: + 44-208-954-2356
Fax: + 44-208-954-6234
Greece – Athens
Phone: + 30-1-9370-396/7
Fax: + 30-1-9370-655
Holland – ’s-Hertogenbosch
Phone: + 31-73-624-62-46
Fax: + 31-73-621-23-65
Hungary – Budapest
Phone: + 36-1-350-8633
Fax: + 36-1-350-8634
Ireland – Dublin
Phone: + 353-1-820-3000
Fax: + 353-1-820-9790
Israel – Tel Aviv
Phone: + 972-3-649-1482
Fax: + 972-3-648-4041
Italy – Torino
Phone: + 39-011-4012-111
Fax: + 39-011-4031-116
Lithuania – Vilnius
Phone: + 370-2-231-402
Fax: + 370-2-231-403
Norway – Nesbru
Phone: + 47-66-77-8899
Fax: + 47-66-77-8855
Poland – Warsaw
Phone: + 48-22-611-59-30
Fax: + 48-22-672-47-88
Portugal – Lisbon
Phone: + 351-1-387-70-16
Fax: + 351-1-387-71-72
Romania – Bucharest
Phone: + 40-1-311-3479/3596
Fax: + 40-1-312-0574
Russia - Moscow
Phone: + 7-095-926-5506/07/08/09
Fax: + 7-095-926-5505
Russia - St. Petersburg
Phone: + 7-812-325-30-83
Fax: + 7-812-325-32-88
Slovakia – Banska Bystrica
Phone: + 421-88-415-20-11/12
Fax: + 421-88-415-20-13
Slovenia – Ljubljana
Phone: + 386-61-161-3270
Fax: + 386-61-161-3240
South Africa – Midrand
Phone: + 27-11-314-10-89
Fax: + 27-11-314-19-10
Spain – Barcelona
Phone: + 34-93-291-0330
Fax: + 34-93-201-7879
Asia/Pacific
Australia – Sydney
Phone: + 61-2-9840-8200
Fax: + 61-2-9899-5649
India – Bangalore
Phone: + 91-80-841-0200
Fax: + 91-80-841-0210
Indonesia – Jakarta
Phone: + 6221-526-7852
Fax: + 6221-526-7856
Japan – Tokyo
Phone: + 81-44-844-8111
Fax: + 81-44-812-3207
Korea – Seoul
Phone: + 82-2-3274-0535
Fax: + 82-2-3274-0524/0531
Malaysia – Selangor
Phone: + 60-3-7053055
Fax: + 60-3-7053066
New Zealand – Auckland
Phone: + 64-9-634-4580
Fax: 64-9-634-4586
People’s Republic of China
Hong Kong
Phone: + 852-2735-1628
Fax: + 852-2735-0243
Shanghai
Phone: + 86-21-6485-0602
Fax: + 86-21-6485-0728
Shunde
Phone: + 86-765-7751368
Fax: + 86-765-7752823
Philippines – Makati City
Phone: + 632-867-8641
Fax: + 632-867-8661
Singapore – Singapore
Phone: + 65-482-0311
Fax: + 65-482-1012
Taiwan – Taipei
Phone: + 886-2-2325-0391
Fax: + 886-2-2325-0398
Thailand – Bangkok
Phone: + 66-2-955-0500
Fax: + 66-2-955-0505
Vietnam – Ho Chi Minh City
Phone: + 84-8-8232-546/7
Fax: + 84-8-8221-443
Sweden – Upplands Vasby
Phone: + 46-8-50-72-50-00
Fax: + 46-8-50-72-50-01
Switzerland – Steinach
Phone: + 41-71-447-0447
Fax: + 41-71-447-0444
Turkey – Istanbul
Phone: + 90-212-281-8181/2/3
Fax: + 90-212-281-8184
Ukraine – Kiev
Phone: + 38-044-246-5501
Fax: + 38-044-246-5501
For Middle East/African
Countries not shown
Phone: +33-1-34-20-83-83
Fax: +33-1-34-20-86-09
Contact Us Worldwide Catalog 65505
Revised 9-00
